percussive drilling consumables

QUARRY MINING & CONSTRUCTION EQUIPMENT PTY LTD

PERCUSSIVE DRILLING CONSUMABLES

Expertise You Can Depend On

PERCUSIVE DRILLING CONSUMABLES

Tel: +27 11 622 0908 www.abexsteel.com [email protected]

PERCUSSIVEDRILLINGCONSUMABLES

www.abexsteels.com

3

SMALL HOLE DRILLING

INTEGRAL DRILL STEELSINTEGRAL DRILL STEELSINTEGRAL DRILL STEELS

Shank 22 x 108mmShank 22 x 108mmShank 22 x 108mm

PART NUMBER EFFECTIVE LENGTH (L) DIAMETER (D)

IDS-22108HM-0600-29 600mm 29mm

IDS-22108HM-0600-34 600mm 34mm

IDS-22108HM-0600-41 600mm 41mm

IDS-22108HM-0800-29 800mm 29mm

IDS-22108HM-0800-34 800mm 34mm

IDS-22108HM-0800-40 800mm 40mm

IDS-22108HM-1200-29 1200mm 29mm

IDS-22108HM-1200-34 1200mm 34mm

IDS-22108HM-1200-40 1200mm 40mm

IDS-22108HM-1600-28 1600mm 28mm

IDS-22108HM-1600-33 1600mm 33mm

IDS-22108HM-1800-28 1800mm 28mm

IDS-22108HM-1800-33 1800mm 33mm

IDS-22108HM-1800-38 1800mm 38mm

IDS-22108HM-2100-33 2100mm 33mm

IDS-22108HM-2200-28 2200mm 28mm

IDS-22108HM-2400-28 2400mm 28mm

IDS-22108HM-2400-32 2400mm 32mm

IDS-22108HM-2400-38 2400mm 38mm

IDS-22108HM-3200-28 3200mm 28mm

IDS-22108HM-3200-31 3200mm 31mm

IDS-22108HM-3200-37 3200mm 37mm

IDS-22108HM-4000-30 4000mm 30mm

SMALL H

OLE D

RILLING

2

4

REAMING TOOLS

PILOT RODS - 6° TAPERPILOT RODS - 6° TAPER

Shank 22 x 108mmShank 22 x 108mm

PART NUMBER EFFECTIVE LENGTH (L)

PR-22H-0600 600mm

PR-22H-0900 900mm

PR-22H-1200 1200mm

PR-22H-1800 1800mm

PR-22H-2100 2100mm

REAMIN

G TOO

LS

PERCUSSIVE REAMING BITS - 6° TAPERPERCUSSIVE REAMING BITS - 6° TAPER

PART NUMBER DIAMETER (D)

PRB-06D-64-H 64mm

PRB-06D-76-H 76mm

PRB-06D-89-H 89mm

5

TAPERED RODS AND BITS

12° TAPER SPHERICAL BUTTON DRILL BITS12° TAPER SPHERICAL BUTTON DRILL BITS


BB-12D-28-H 28mm

BB-12D-32-H 32mm

BB-12D-35-H 35mm

BB-12D-38-H 38mm

BB-12D-45-H 45mm

12° TAPER DRILL RODS12° TAPER DRILL RODS



TDS-22H-12D-0600 600mm

TDS-22H-12D-0800 800mm

TDS-22H-12D-0900 900mm

TDS-22H-12D-1200 1200mm

TDS-22H-12D-1500 1500mm

TDS-22H-12D-1800 1800mm

TDS-22H-12D-2100 2100mm

TDS-22H-12D-2400 2400mm

TDS-22H-12D-3000 3000mm

TDS-22H-12D-3600 3600mm

TDS-22H-12D-4000 4000mm

TAPERED RO

DS AN

D BITS

6

12° TAPER BALLISTIC BUTTON DRILL BITS12° TAPER BALLISTIC BUTTON DRILL BITS


BB-12D-28-B 28mm

BB-12D-32-B 32mm

BB-12D-35-B 35mm

BB-12D-38-B 38mm

BB-12D-45-B 45mm

TAPERED RO

DS AN

D BITS

7

SPLIT SET DOLLIES

AIRLEG DOLLIESAIRLEG DOLLIES

PART NUMBER SPLIT SET SIZE

SD-33-300-22R 33mm

SD-39-300-22R 39mm

SD-47-300-22R 47mm

SPLIT SET DO

LLIES

FEMALE THREADED DOLLIESFEMALE THREADED DOLLIESFEMALE THREADED DOLLIES

PART NUMBER INTERNAL THREAD SPLIT SET SIZE

SD-22HF-33 22 Hex 33mm

SD-R25F-33 R25 33mm

SD-R32F-33 R32 33mm

SD-R32F-39 R32 39mm

SD-R32F-46 R32 46mm

SD-R38F-33 R38 33mm

SD-R38F-39 R38 39mm

SD-R38F-46 R38 46mm

SD-T38F-33 T38 33mm

SD-T38F-39 T38 39mm

SD-T38F-46 T38 46mm

8

R25 EXTENSION DRILLING

R25 MALE / FEMALE EXTENSION RODSR25 MALE / FEMALE EXTENSION RODS


MF-R25-0600 600mm

MF-R25-0900 900mm

MF-R25-1200 1200mm

MF-R25-1800 1800mm

R25 SHANK RODSR25 SHANK RODS



SR-22H-R25M-0300 300mm

SR-22H-R25M-0400 400mm

SR-22H-R25M-0600 600mm

SR-22H-R25M-0900 900mm

SR-22H-R25M-1200 1200mm

SR-22H-R25M-1500 1500mm

SR-22H-R25M-1800 1800mm

SR-22H-R25M-2100 2100mm

SR-22H-R25M-2400 2400mm

SR-22H-R25M-3100 3100mm

SR-22H-R25M-3600 3600mm

R25 EXTENSIO

N D

RILLING

9

R25 SPHERICAL BUTTON DRILL BITSR25 SPHERICAL BUTTON DRILL BITS

PART NUMBER DIMENSION (D)

BB-R25-33-H 33mm

BB-R25-35-H 35mm

BB-R25-38-H 38mm

BB-R25-41-H 41mm

BB-R25-43-H 43mm

BB-R25-45-H 45mm

BB-R25-48-H 48mm

BB-R25-51-H 51mm

BB-R25-57-H 57mm

R25 EXTENSIO

N D

RILLING

R25 BALLISTIC BUTTON DRILL BITSR25 BALLISTIC BUTTON DRILL BITS


BB-R25-33-B 33mm

BB-R25-35-B 35mm

BB-R25-38-B 38mm

BB-R25-41-B 41mm

BB-R25-43-B 43mm

BB-R25-45-B 45mm

BB-R25-48-B 48mm

BB-R25-51-B 51mm

BB-R25-57-B 57mm

10

R25 CROSS DRILL BITSR25 CROSS DRILL BITS


XB-R25-41 41mm

XB-R25-45 45mm

XB-R25-51 51mm

XB-R25-57 57mm

R25 EXTENSIO

N D

RILLING

11

HAND HELD PNEUMATIC EQUIPMENT - PERCUSSIVE

Sales - Hire - Service

Refer to page 3 and 8 for compatible drill steels

A Full Range of Spare Parts is available for all equipment

The “BOAR” has a lightweight piston with large diameter, powerful rotation mechanism and flushing, assuring successful drilling output, even when drilling in poor rock and with low air pressure operation.

BOAR SERIES ROCK DRILLS

BOAR SERIES ROCK DRILLS - TECHNICAL SPECIFICATIONSBOAR SERIES ROCK DRILLS - TECHNICAL SPECIFICATIONSBOAR SERIES ROCK DRILLS - TECHNICAL SPECIFICATIONSBOAR SERIES ROCK DRILLS - TECHNICAL SPECIFICATIONS

Model Boar Boar Max Boar Max Plus

Part Number DU-9-307-01-L DU-9-307-05-L DU-9-307-10-L

Boar 90 mm 90 mm 90 mm

Stroke 45 mm 60 mm 60 mm

Impact Rate 3100 min-1 2750 min-1 2650 min-1

Free Speed 320 RPM 300 RPM 265 RPM

Air Consumption 4.5 m3/min @ 6 bar 4.5 m3/min @ 6 bar 4.5 m3/min @ 6 bar

Operating Air Pressure 4-7 bar 4-7 bar 4-7 bar

Air Connection 1” BSP 1” BSP 1” BSP

Water Connection 1/2” Hose 1/2” Hose 1/2” Hose

Rock Drill Shank 22 x108 mm Hex 22 x108 mm Hex 22 x108 mm Hex

Net Weight 30.5 kg 31 kg 31 kg

Length 685 mm 700 mm 700 mm

All models are available with sinker anti-vibration handle. When fitted, measured vibration* is reduced from 23 ms-2 to 7.5 ms-2

*Vibration levels were recorded @ 6 bar pressure

HAN

D H

ELD PN

EUMATIC EQ

UIPMEN

T

12

DT SERIES AIRLEGS - TWO STAGEDT SERIES AIRLEGS - TWO STAGEDT SERIES AIRLEGS - TWO STAGEDT SERIES AIRLEGS - TWO STAGEDT SERIES AIRLEGS - TWO STAGE

PART NUMBER RETRACTED LENGTH (A) STROKE (B) EXTENDED

LENGTH (C) PISTON DIAMETER

DU-64-979-014-DM 1305mm 1440mm 2745mm 78/65mm

Features:! Durable construction! Independent controls – airleg mounted! Double telescopic design! Push button retraction – airleg mounted! Minimum repositioning during drilling

The double telescopic design characteristic incorporating independent control and push-button retraction gives added flexibility and manoeuvrability in all conditions, minimising repositioning of the airleg during hole drilling.

The double telescopic extension allows for long haul drilling in one pass.


HAN

D H

ELD PN

EUMATIC EQ

UIPMEN

T

Other sizes may be available on request. Please enquire for lead times.


13

Features:

• Unbeatable combination of both the Boar Series Rockdrill and DT Series Jackleg technologies

• Double telescopic design

• Adjustable drilling speed and feed pressure controls

• Very robust and extremely reliable

• High level of part interchangeability with standard rockdrills and airlegs

BOAR SERIES DOUBLE TELESCOPIC STOPERSBOAR SERIES DOUBLE TELESCOPIC STOPERSBOAR SERIES DOUBLE TELESCOPIC STOPERSBOAR SERIES DOUBLE TELESCOPIC STOPERSBOAR SERIES DOUBLE TELESCOPIC STOPERS

MODELS NUMBER COLLAPSED LENGTH EXTENDED LENGTH STROKE ROTATION

DU-9-307-07-ST-150L – Double Telescopic 1520 mm (60") 3070 mm (121") 1550 mm (61") Left

DU-9-307-07-ST-150R – Double Telescopic 1520 mm (60") 3070 mm (121") 1550 mm (61") Right


Other sizes may be available on request. Please enquire for lead times.Refer to page 3 and 8 for compatible drill steels H

AND

HELD

PNEUM

ATIC EQUIPM

ENT

14

ERGONOMIC LIGHT WEIGHT ROCK DRILLSERGONOMIC LIGHT WEIGHT ROCK DRILLSERGONOMIC LIGHT WEIGHT ROCK DRILLS

PART NUMBER SHANK WEIGHT

AM-PL5 / CP9 CP9 5.5 kg


HAN

D H

ELD PN

EUMATIC EQ

UIPMEN

T

CP9 INTEGRAL DRILL STEELSCP9 INTEGRAL DRILL STEELSCP9 INTEGRAL DRILL STEELS

PART NUMBER OVERALL LENGTH (L) DIAMETER (D)

CP9-0200-16 200mm 16mm

CP9-0200-19 200mm 19mm

CP9-0200-22 200mm 22mm

CP9-0200-28 200mm 28mm

CP9-0330-25 330mm 25mm

CP9-0330-32 330mm 32mm

CP9-0330-35 330mm 35mm

CP9-0330-13 330mm 13mm

CP9-0330-16 330mm 16mm

CP9-0330-19 330mm 19mm

CP9-0330-28 330mm 28mm

CP9-0430-19 430mm 19mm

CP9-0430-22 430mm 22mm

CP9-0430-25 430mm 25mm

CP9-0430-32 430mm 32mm

CP9-0430-35 430mm 35mm

CP9-0450-14 450mm 14mm

CP9-0450-19 450mm 19mm

CP9-0450-24 450mm 24mm

CP9-0450-32 450mm 32mm

CP9-0450-35 450mm 35mm

CP9-0590-32 590mm 32mm

15

CP9 DRILL STEELS - MOIL, CHISEL AND SPADECP9 DRILL STEELS - MOIL, CHISEL AND SPADECP9 DRILL STEELS - MOIL, CHISEL AND SPADE

PART NUMBER OVERALL LENGTH (L) END TYPE

CP9-MP-250 250mm Moil

CP9-CH-250 250mm Chisel

CP9-CH-350 350mm Chisel

CP9-SP-60 250mm Spade

HAN

D H

ELD PN

EUMATIC EQ

UIPMEN

T

16

ERGONOMIC LIGHT WEIGHT HAMMERSERGONOMIC LIGHT WEIGHT HAMMERSERGONOMIC LIGHT WEIGHT HAMMERSERGONOMIC LIGHT WEIGHT HAMMERS

PART NUMBER HAMMER TYPE SHANK WEIGHT

AM-SP55 Pick Hammer 19mm hex 6.2 kg

AM-SP66 Pick Hammer 19mm hex 7.0 kg

AM-PS90 Breaker Hammer 22x108mm hex 9.6 kg

22 HEX MOIL, CHISEL AND SPADE22 HEX MOIL, CHISEL AND SPADE22 HEX MOIL, CHISEL AND SPADE

PART NUMBER OVERALL LENGTH (L) END TYPE

MP-22083HM-0380 380mm Moil

MP-22083HM-0460 450mm Moil

CHI-22083HM-0380 380mm Chisel

CHI-22083HM-0450 450mm Chisel

CHI-22083HM-0380-75W 460mm Spade


HAN

D H

ELD PN

EUMATIC EQ

UIPMEN

T

17


TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS

Air Consumption 51m3/hr @ 60PSI (Water Only)

Water Pumping Rate 53l/m

Grout Pumping Rate 23l/m

Maximum Air Pressure 14MPa

Weight 21Kg

MIXER & BOWL - CHOICE OF 63 LITRE OR 160 LITRE CAPACITY• Safety cage standard on all units

MIXER TECHNICAL SPECIFICATIONSMIXER TECHNICAL SPECIFICATIONSAir Consumption 26l/s@620kPa

Max. Working Air Pressure 100 PSI (650kPa)

Operating Speed (No Load) 150 r.p.m.

Stall Torque 155FT/LBS (210.15 Nm)

Hose Connection 3⁄4” BSP

Weight 13kg

RECIPROCATING SINGLE PISTON PUMP

Air driven, reciprocating, single piston pump. The reciprocating air-motor being directly linked by the connecting rod to the piston of the pump. This piston has a built in check valve which opens on the down stroke and closes on the up stroke, the liquid trapped in the riser tube then being pushed out by the piston as it moves up.

MIXING BOWL COMPLETE UNITSIncludes: Mixing Drum, Cross Head, Paddle Assembly & Mixer MotorMIXING BOWL COMPLETE UNITSIncludes: Mixing Drum, Cross Head, Paddle Assembly & Mixer MotorMIXING BOWL COMPLETE UNITSIncludes: Mixing Drum, Cross Head, Paddle Assembly & Mixer MotorMIXING BOWL COMPLETE UNITSIncludes: Mixing Drum, Cross Head, Paddle Assembly & Mixer Motor

Part Number Bowl Capacity Bowl Material Dry Weight

WH-970 160L Mild Steel 65Kg (Including Air Motor)


GROUTING EQUIPMENTROOF BOLTING - POST GROUTING - LONG HOLE GROUTING - SPRAYING

GROUTIN

G EQUIPM

ENT

18

AIR OPERATED ADJUSTABLE OIL LUBRICATORS

ROCK DRILL AIR LUBRICATORS

PART NUMBER THREAD

OIL CAPACITY

MAX WP

COMPONENT MATERIALSCOMPONENT MATERIALSCOMPONENT MATERIALSCOMPONENT MATERIALSPART NUMBER THREAD

OIL CAPACITY

MAX WP BODY VENTURI JET BUNDY TUBES

DX-08-066-02-000 1” BSP 1.2L 300 PSI Mild Steel Cast Steel Mild Steel Copper

PART NUMBER THREAD OIL CAPACITY WORK PRESSURE

FLOW RATE(MAX)

FF-FKY200 3/4” BSP 200 mL 150 PSI 5 mL/hr

IN-LINE LUBRICATORS - PLASTIC BODY (S/S HOUSING)

ROCK D

RILL AIR LUBRICATORS

Air lubricator setup guide available at back of catalogue

19

Rock Drill Y-Pieces complete with minsup Type-A fittings. Available in both standard A/W and FRAS Delivery Hose

Standard Y-Piece configuration:

ROCK DRILL Y-PIECESRO

CK DRILL Y-PIECES

PART NUMBER HOSE GRADE

Y-PIECE-HOSE Standard A/W Delivery

Y-PIECE-HOSE-FR FRAS Delivery

20

HAND HELD ROCK DRILL SPANNERS - 22 HEX DRIVEHAND HELD ROCK DRILL SPANNERS - 22 HEX DRIVEHAND HELD ROCK DRILL SPANNERS - 22 HEX DRIVE

Shank 22 x 70mmShank 22 x 70mmShank 22 x 70mm

PART NUMBER OVERALL LENGTH (L) WEIGHT

SP-22HM-0300-36 300mm 1.55 Kg

SP-22HM-0500-36 500mm 2.55 Kg

SP-22HM-0600-36 600mm 3.05 Kg

ROO

F BOLT SPAN

NERS

ROCK DRILL DOLLIESAll spanners have premium hardened steel sockets

* Other sockets can be manufactured on request

21

DRIFTING AND TUNNELING

R32 MALE / FEMALE DRILL RODSR32 MALE / FEMALE DRILL RODS


MF-R32-1200 1200mm

MF-R32-1800 1800mm

MF-R32-2400 2400mm

MF-R32-3100 3100mm

MF-R32-3600 3600mm

MF-R32-4300 4300mm

MF-R32-5500 5500mm

R32 MALE / MALE DRILL RODSR32 MALE / MALE DRILL RODS


MM-R32-1800 1800mm

MM-R32-3100 3100mm

MM-R32-3600 3600mm

COUPLING SLEEVECOUPLING SLEEVE

CP-R32F-R32F R32 Coupling

DRIFTIN

G AND

TUNN

ELING

22

R32 SPHERICAL BUTTON DRILL BITSR32 SPHERICAL BUTTON DRILL BITSR32 SPHERICAL BUTTON DRILL BITS

PART NUMBER FACE TYPE DIAMETER (D)

BB-R32-43-H N/A 43mm





BB-R32-64-H-FF Flat Face 64mm

BB-R32-64-H-DC Drop Centre 64mm

BB-R32-76-H-FF Flat Face 76mm

BB-R32-76-H-DC Drop Centre 76mm

R32 BALLISTIC BUTTON DRILL BITSR32 BALLISTIC BUTTON DRILL BITS


BB-R32-43-B N/A 43mm





BB-R32-64-B-FF Flat Face 64mm

BB-R32-64-B-DC Drop Centre 64mm

BB-R32-76-B-FF Flat Face 76mm

BB-R32-76-B-DC Drop Centre 76mm

DRIFTIN

G AND

TUNN

ELING

23

R32 SPHERICAL BUTTON RETRAC DRILL BITSR32 SPHERICAL BUTTON RETRAC DRILL BITSR32 SPHERICAL BUTTON RETRAC DRILL BITS


RTB-R32-51-H N/A 51mm

RTB-R32-57-H N/A 57mm

RTB-R32-64-H-FF Flat Face 64mm

RTB-R32-64-H-DC Drop Centre 64mm

RTB-R32-76-H-FF Flat Face 76mm

RTB-R32-76-H-DC Drop Centre 76mm

R32 BALLISTIC BUTTON RETRAC DRILL BITSR32 BALLISTIC BUTTON RETRAC DRILL BITSR32 BALLISTIC BUTTON RETRAC DRILL BITS


RTB-R32-51-B N/A 51mm

RTB-R32-57-B N/A 57mm

RTB-R32-64-B-FF Flat Face 64mm

RTB-R32-64-B-DC Drop Centre 64mm

RTB-R32-76-B-FF Flat Face 76mm

RTB-R32-76-B-DC Drop Centre 76mm

DRIFTIN

G AND

TUNN

ELING

R32 CROSS DRILL BITSR32 CROSS DRILL BITS


XB-R32-41 41mm

XB-R32-45 45mm

XB-R32-51 51mm

XB-R32-57 57mm

24

MALE / MALE DRIFTER RODS - R38 - R32MALE / MALE DRIFTER RODS - R38 - R32


DF-R38M-R32M-35H2400 2400mm

DF-R38M-R32M-35H3100 3100mm

DF-R38M-R32M-35H3600 3600mm

DF-R38M-R32M-35H4300 4300mm

MALE / MALE DRIFTER RODS - R32 - R25MALE / MALE DRIFTER RODS - R32 - R25


DF-R32M-R25M-25H2400 2400mm

DF-R32M-R25M-25H3100 3100mm

DF-R32M-R25M-25H3600 3600mm

MALE / MALE DRIFTER RODS - T38 - R32MALE / MALE DRIFTER RODS - T38 - R32


DF-T38M-R32M-35H2400 2400mm

DF-T38M-R32M-35H3100 3100mm

DF-T38M-R32M-35H3600 3600mm

DF-T38M-R32M-35H4300 4300mm

DRIFTIN

G AND

TUNN

ELING

25

ADAPTO

RS

CROSSOVER COUPLINGSCROSSOVER COUPLINGS

PART NUMBER DESCRIPTION

CP-R32F-R25F Coupling Cross Over R32 - R25

CP-R38F-R32F Coupling Cross Over R38 - R32

CP-T38F-R32F Coupling Cross Over T38 - R32

ADAPTORS

BIT ADAPTORSBIT ADAPTORS

PART NUMBER DESCRIPTION

BA-LH-R25F-R32M Bit Adaptor R25 Female - R32 Male


BA-LH-R32F-T38M Bit Adaptor R32 Female - T38 Male


BA-LH-R38F-T38M Bit Adaptor R38 Female - T38 Male

BA-LH-ST58F-ST68M Bit Adaptor ST58 Female - ST68 Male

BA-LH-T38F-R32M Bit Adaptor T38 Female - R32 Male (Pictured Below)

BA-LH-T38F-R38M Bit Adaptor T38 Female - R38 Male

BA-LH-T38F-T45M Bit Adaptor T38 Female - T45 Male

BA-LH-T45F-T38M Bit Adaptor T45 Female - T38 Male (Pictured Below)



BA-LH-R25M-R25M Bit Adaptor R25 Male - R25 Male

BA-LH-R32M-R32M Bit Adaptor R32 Male - R32 Male

BA-LH-T45M-T45M Bit Adaptor T45 Male - T45 Male

* Other adaptors can be made to order

26

BENCH AND LONG HOLE DRILLING

T38 MALE / FEMALE DRILL RODST38 MALE / FEMALE DRILL RODS


MF-T38-0900 900mm

MF-T38-1200 1200mm

MF-T38-1500 1500mm

MF-T38-1800 1800mm

MF-T38-2400 2400mm

MF-T38-3100 3100mm

MF-T38-3600 3600mm

MF-T38-4300 4300mm

T38 MALE / MALE DRILL RODST38 MALE / MALE DRILL RODS


MM-T38-1800 1800mm

MM-T38-3100 3100mm

MM-T38-3600 3600mm


CP-T38F-T38F T38 Coupling

BENCH

AND

LON

G HO

LE DRILLIN

G

27

T38 SPHERICAL BUTTON DRILL BITST38 SPHERICAL BUTTON DRILL BITST38 SPHERICAL BUTTON DRILL BITS


BB-T38-64-H-FF Flat Face 64mm

BB-T38-64-H-DC Drop Centre 64mm





T38 BALLISTIC BUTTON DRILL BITST38 BALLISTIC BUTTON DRILL BITST38 BALLISTIC BUTTON DRILL BITS


BB-T38-64-B-FF Flat Face 64mm

BB-T38-64-B-DC Drop Centre 64mm





FLAT FACE DROP CENTRE



BENCH

AND

LON

G HO

LE DRILLIN

G

28

T38 SPHERICAL BUTTON RETRAC DRILL BITST38 SPHERICAL BUTTON RETRAC DRILL BITST38 SPHERICAL BUTTON RETRAC DRILL BITS


RTB-T38-64-H-FF Flat Face 64mm

RTB-T38-64-H-DC Drop Centre 64mm





T38 BALLISTIC BUTTON RETRAC DRILL BITST38 BALLISTIC BUTTON RETRAC DRILL BITST38 BALLISTIC BUTTON RETRAC DRILL BITS


RTB-T38-64-B-FF Flat Face 64mm

RTB-T38-64-B-DC Drop Centre 64mm








BENCH

AND

LON

G HO

LE DRILLIN

G

29



MF-T45-1800 1800mm

MF-T45-3100 3100mm

MF-T45-3600 3600mm

MF-T45-4300 4300mm



MM-T45-1800 1800mm

MM-T45-3100 3100mm

MM-T45-3600 3600mm

COUPLING SLEEVE


BENCH

AND

LON

G HO

LE DRILLIN

G

30



























BENCH

AND

LON

G HO

LE DRILLIN

G

31



























BENCH

AND

LON

G HO

LE DRILLIN

G

32



MF-T51-3600 3600mm

MF-T51-4300 4300mm

MF-T51-6000 6000mm



MM-T51-0900 900mm

MM-T51-3600 3600mm

MM-T51-5000 5000mm

MM-T51-6000 6000mm



BENCH

AND

LON

G HO

LE DRILLIN

G

33




















BENCH

AND

LON

G HO

LE DRILLIN

G

34




















BENCH

AND

LON

G HO

LE DRILLIN

G

35




















BENCH

AND

LON

G HO

LE DRILLIN

G

36




















BENCH

AND

LON

G HO

LE DRILLIN

G

37

SHANK ADAPTORS

ATLAS COPCO ATLAS COPCO ATLAS COPCO ATLAS COPCO ATLAS COPCO ATLAS COPCO ATLAS COPCOL D SPLINE OD SPLINE L THREAD DRIFTER

340mm 45mm 54mm 58mm R32 COP1032 HD

550mm 44.9mm 53.9mm 58.5mm T35 COP1032

485mm 38mm 54mm 74mm R32 COP1038 HD/1238

485mm 38mm 54mm 74mm R38

485mm 38mm 54mm 74mm T38

485mm 38mm 54mm 74mm R38 COP1238

485mm 38mm 54mm 74mm T38

500mm 38mm 54mm 74mm R32

500mm 38mm 54mm 74mm T38

500mm 45mm 54mm 74mm T45

435mm 38mm 54mm 84.5mm R38 COP1432, COP1532, COP1440, COP1838 HD/ME

435mm 38mm 54mm 84.5mm T35

COP1432, COP1532, COP1440, COP1838 HD/ME

435mm 38mm 54mm 84.5mm T38


435mm 38mm 54mm 84.5mm R32


525mm 52mm 53.9mm 84.5mm T38 COP1550, COP1838 ME/HE

525mm 52mm 53.9mm 84.5mm T45

COP1550, COP1838 ME/HE

525mm 52mm 53.9mm 84.5mm T51

COP1550, COP1838 ME/HE

SHAN

K ADAPTO

RS

38

FURUKAWAFURUKAWAFURUKAWAFURUKAWAFURUKAWAFURUKAWAFURUKAWAL D SPLINE OD SPLINE L THREAD DRIFTER

655mm 45mm 64.4mm 79mm T38 FURUKAWA HD260, HD300

655mm 45mm 64.4mm 79mm T45

FURUKAWA HD260, HD300

710mm 50.8mm 64.9mm 89mm T45 FURUKAWA HD612

GARDNER-DENVER, INGERSOLL-RAND & REEDRILLGARDNER-DENVER, INGERSOLL-RAND & REEDRILLGARDNER-DENVER, INGERSOLL-RAND & REEDRILLGARDNER-DENVER, INGERSOLL-RAND & REEDRILLGARDNER-DENVER, INGERSOLL-RAND & REEDRILLGARDNER-DENVER, INGERSOLL-RAND & REEDRILLGARDNER-DENVER, INGERSOLL-RAND & REEDRILLL D SPLINE OD SPLINE L THREAD DRIFTER

330mm 44.3mm 55.5mm 64mm R32 GARDENER-DENVER PR123

INGERSOLL-RAND VL140

350mm 44.3mm 55.5mm 64mm R38

GARDENER-DENVER PR123

INGERSOLL-RAND VL140446mm 44.3mm 55.5mm 64mm T38



380mm 44.3mm 55.5mm 64mm T38



495mm 45mm 64.3mm 85mm T38 INGERSOLL-RAND YH65, YH80

500mm 45mm 64.3mm 85mm T45

INGERSOLL-RAND YH65, YH80

MONTABERTMONTABERTMONTABERTMONTABERTMONTABERTMONTABERTMONTABERTL D SPLINE OD SPLINE L THREAD DRIFTER

370mm 38mm 52.7mm 58mm T38 MONTABERTHC40, HC50

490mm 45mm 59.7mm 95mm T45 MONTABERT HC120, HC150

670mm 51mm 59.7mm 102mm T51 MONTABERT HC80R, HC120R, HC150R

SHAN

K ADAPTO

RS

39

SANDVIKSANDVIKSANDVIKSANDVIKSANDVIKSANDVIKSANDVIKL D SPLINE OD SPLINE L THREAD DRIFTER

400mm 32mm 58.8mm 39mm R32 HL300

245mm 45mm 58.8mm 39mm R28 HL300S

245mm 45mm 58.8mm 39mm R32

HL300S

550mm 38mm 58.8mm 49mm R32 HL500-38/510-38

550mm 38mm 58.8mm 49mm T35

HL500-38/510-38

550mm 38mm 58.8mm 49mm T38

HL500-38/510-38

550mm 45mm 58.8mm 49mm R32 HL500-45/510-45

550mm 45mm 58.8mm 49mm T35

HL500-45/510-45

550mm 45mm 58.8mm 49mm T38

HL500-45/510-45

550mm 45mm 58.8mm 49mm T45

HL500-45/510-45

550mm 45mm 58.8mm 49mm T35 HL 550 SUPER / 560 SUPER / 510 S-45500mm 45mm 58.8mm 49mm R38

HL 550 SUPER / 560 SUPER / 510 S-45

500mm 45mm 58.8mm 49mm T38

HL 550 SUPER / 560 SUPER / 510 S-45

500mm 45mm 58.7mm 49mm R32 HLX 5 / HLX 5T

500mm 45mm 58.7mm 49mm T35

HLX 5 / HLX 5T

500mm 45mm 58.7mm 49mm T38

HLX 5 / HLX 5T

500mm 45mm 58.7mm 49mm R38

HLX 5 / HLX 5T

550mm 45mm 58.7mm 49mm R32

HLX 5 / HLX 5T

550mm 45mm 58.7mm 49mm T35

HLX 5 / HLX 5T

550mm 45mm 58.7mm 49mm T38

HLX 5 / HLX 5T

550mm 45mm 58.7mm 49mm T45

HLX 5 / HLX 5T

600mm 45mm 60mm 75mm R32 HL 600-45 / HL 600 S-45 / HL 600-52600mm 45mm 60mm 75mm T38

HL 600-45 / HL 600 S-45 / HL 600-52

600mm 45mm 60mm 75mm T45

HL 600-45 / HL 600 S-45 / HL 600-52

525mm 45mm 60mm 75mm T38

HL 600-45 / HL 600 S-45 / HL 600-52

525mm 45mm 60mm 75mm T45

HL 600-45 / HL 600 S-45 / HL 600-52

650mm 52mm 60mm 75mm T45

HL 600-45 / HL 600 S-45 / HL 600-52

650mm 52mm 60mm 75mm T51

HL 600-45 / HL 600 S-45 / HL 600-52

SHAN

K ADAPTO

RS

40

SANDVIKSANDVIKSANDVIKSANDVIKSANDVIKSANDVIKSANDVIKL D SPLINE OD SPLINE L THREAD DRIFTER

600mm 45mm 69mm 95mm T38 HL 650/700-45HL 650/700-52

600mm 45mm 69mm 95mm T45

HL 650/700-45HL 650/700-52

600mm 52mm 69mm 95mm T38

HL 650/700-45HL 650/700-52

600mm 52mm 69mm 95mm T45

HL 650/700-45HL 650/700-52

600mm 52mm 69mm 95mm T51

HL 650/700-45HL 650/700-52

670mm 52mm 79mm 75mm T45 HL 1000-52 / HL 1000 S-52

670mm 52mm 79mm 75mm T51

HL 1000-52 / HL 1000 S-52

590mm 52mm 79mm 75mm T45

HL 1000-52 / HL 1000 S-52

590mm 52mm 79mm 75mm T51

HL 1000-52 / HL 1000 S-52

SHAN

K ADAPTO

RS

41

HOSES, FITTINGS VALVES & OTHER ACCESSORIES

Full Range of Valves•Econovalve•Butterfly•Swing Check•Pressure Reducing

Hoses and Fittings• Air / Water• FRAS• Suction• Delivery

WhipchecksStrainers

To view our full range of these products please see our Industrial Accessories For Mining And Construction Catalogue

HO

SES, FITTINGS, VALVES & O

THER ....

The correct set-up and adjustment of the Oil Lubricator "Turtle" is critical to ensuring the performance and reliability of the pneumatic equipment. Too much oil is as bad as too little; oil is basically only required to provide some lubricant for the air motor. These instructions are for the 'Minsup' Oil Lubricator but the principles will be similar for other types.

Oil Lubricator Adjustment

Set-up of LubricatorThe lubricator should be installed in line of the air hose, no more than 5m from the pneumatic rockdrill.

Safety clips must be used to ensure that high pressure air fittings cannot become accidentally disconnected.

The arrow marked on the top of the lubricator indicates the direction that the air should be flowing (should be pointing at the pneumatic rockdrill).

To check or fill the oil in the Lubricator, remove the filler cap by placing a large screwdriver across the cap and undoing anti-clockwise.

Most pneumatic drills are designed to be run using a light rockdrill oil 20-30 grade.

The lubricator should only be half filled (if you look inside the lubricator, oil should not be over the copper pipe) this should be sufficient for at least a full shift.Signs of over-oiling of a rockdrill include the following:• Excessive oil vapor in the air• Oil dripping out from the motor muffler• Legs sticking (if applicable) and valves not dumping air

OIL LUBRICATO

R ADJUSTM

ENT



Adjustment of oil flow to adjust the rate of oil flow, first remove the 1/4” BSP plug on top of the lubricator using a 6mm Allen key.

Next unscrew the locking nut using a straight blade screwdriver.(Note: this brass nut should not be confused with the adjustment screw which sits underneath).

To set up the lubricator, using a flat blade screwdriver first turn the adjustor fully clockwise, then turn back 1 1/3 turns.

Testing of oil flowThe adjustment of the Lubricator can be tested by setting up a piece of cardboard approx. 1 m from the air outlet of the lubricator. Carefully turn on the air supply (this should be 3000lpm at 7bar).The air should contain a fine mist of oil which will leave a damp mark on the cardboard, approximately 50mm diameter. If running droplets of oil appear, this is evidence of over oiling.

Safety points when testing:• Wear safety glasses & ear protection• Beware of air blast from outlet hole, hold lubricator body firmly• Test in a safe area, away from other personnel

OIL LUBRICATO

R ADJUSTM

ENT

percussive drilling consumables

Documents