PENNSYLVANIA HOUSE

BUYERS GUIDE 137 N. 10th Street – Lewisburg, PA

Auction Held on April 5 thru 7 – 9:00 am EST

Preview - Monday April 4 from 9:00am to 4:00pm

10% Buyers Premium

PO BOX 5086 Ph: 717-854-0316 York, PA 17405 Fax: 717-843-7826 Email: info@irsauctions.com

www.irsauctions.com

Customary Terms of Sale All persons attending or participating in an on premises auction or sale acknowledge and agree that their attendance and/or participation constitutes their agreement to be legally bound by all of the terms set forth below (the "Customary Terms of Sale"). 1. IDENTIFICATION: All participants are required to register by giving their full name and address and showing proper identification, acceptable to IRS, upon which they will receive a bidders paddle, if applicable. 2. DEPOSIT: Each bidder agrees to maintain a deposit equal to 25% of the knock down floor price of an item such bidder is bidding on throughout the sale. Deposits made in connection with auctions may be made in advance of the auction and the balance thereof for unsuccessful bidders will be refunded promptly after the auction is completed. Upon non-payment or other default by a bidder, the auctioneer or IRS, as the case may be, in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise as liquidated damages.

3. PAYMENT: (a) The following payment terms apply to on premises auctions and sales:

(i) Invoices must be paid in full by conclusion of sale day unless otherwise specified. (ii) Business and personal checks will not be accepted without a letter of guarantee from a purchaser's bank

acceptable to IRS in substantially the form set forth below:

MR. "CUSTOMER NAME" IS A CUSTOMER OF THIS BANK. THIS BANK GUARANTEES PAYMENT TO INDUSTRIAL RECOVERY SERVICES ON THE ACCOUNT LISTED HEREIN UP TO THE AMOUNT OF $_________. THIS LETTER IS VALID UNTIL (DATE).

Such letter of guarantee must be good for at least 10 days beyond the auction or sale date.

(iii) A buyers premium, to be determined by IRS and announced, will be applied to invoice(s) in addition to the purchase price.

(iv) Sales tax where applicable applies to all sales unless the buyer has, in the sole determination of IRS, proper exemption.

(v) No item will be released until IRS has received payment in full for it. (vi) All checks for deposit and balances due shall be payable to the order of "Industrial Recovery Services." (vii) All invoices or other amounts due shall be paid to IRS or the auctioneer as announced. (viii) The full purchase price on all items sold to the same buyer must be paid within the time announced and before

removal and/or shipment of any items. (ix) Unless otherwise consented to by IRS or if in conformity with (ii) above, all payments shall be in the form of cash

or a certified or cashier's check payable to IRS. (b) For certain sales, including liquidations, IRS may, at its sole discretion, require bank wire payment(s).

4. MANNER OF OFFERING: The auctioneer or IRS, as the case may be, reserves the right to group lots, make lots smaller, add to, delete from, sell similar consecutive lots in groupings and to remove from auction or sale any of the items listed. The auctioneer or IRS, as the case may be, also reserves the right not to accept or acknowledge any bid which is merely a fractional advance over the preceding bid. 5. SALES: All items in an auction will be offered to the highest bidder for cash in accordance with these Customary Terms of Sale. IRS may also offer and sell items without use of an auction upon these Customary Terms of Sale. However, notwithstanding anything herein to the contrary the Customary Terms of Sale are subject to change without notice at any time, including on the day of auction or sale or during an auction, by IRS or the auctioneer, conducting an auction. It is the responsibility of bidders, other participants and attendees to regularly review these Customary Terms of Sale for changes or modifications. IRS shall select a third party or an employee of IRS to conduct on premises auctions and sales. All items will be offered to the highest bidder in accordance with the bid process as established and modified from time to time by IRS. The auctioneer and IRS reserves the right to sell on behalf of third parties or its own account. IRS reserves the right to revoke any bidder's privileges for any reason. IRS reserves the right to extend and/or change the on premises sale date with respect to on premises auctions. All items will be offered subject to prior sale. Should any dispute arise between two or more bidders or parties, or as to any bid, the lot or item in question may, at the discretion of the auctioneer or IRS, be immediately put up again and resold. The auctioneer or IRS, as the case may be, shall regulate all matters relating to the conduct of the auction or sale and the auctioneer's or IRS' decision, as the case may be, shall be final and binding on all bidders or parties. For on-line auctions IRS shall regulate all matters relating to the conduct of the auction or sale and the decision of IRS shall be final and binding on all bidders. The auctioneer or IRS, as the case may be, reserves the right to refuse any unregistered bidder or party the privilege of bidding or participating in an auction or sale and may revoke such privilege at any time. With respect to registered bidders or parties, if the auctioneer or IRS, as the case may be, determines in his or its discretion that a bidder or party is disrupting or interfering with an auction or sale or is not present at an auction or sale for a legitimate business reason, the auctioneer and IRS reserves the right to refuse such bidder or party the privilege of bidding and participating in the auction or sale and may require the bidder or party to leave the premises at which the auction or sale is taking place. All sales are final, on a "as is, where is", "in place", "with all faults" basis with no conditions or warranties whether expressed, implied, statutory or otherwise, including without limitation, warranties or conditions as to title, description, fitness for purpose, quantity, quality,

directors, officers, employees or agents shall have no liability for mis-description of any article or lot whether contained in a catalog, advertisement or otherwise. Descriptions of items have been prepared for guide purposes only and shall not be relied upon by the bidder or buyer for accuracy or completeness. Please take advantage of the inspection period. if any, for an item. Each bidder and buyer shall be deemed to have relied entirely upon his or her own inspections, inquiries and/or investigations, if any. Each bidder and buyer acknowledges and agrees that each has had adequate opportunity to inspect, inquire and/or investigate all the items upon which such bidder or buyer is bidding or attempting to buy. Each of IRS, the auctioneer and the seller of an item, as the case may be, assume no liability for errors, omissions and/or the accuracy of an item's description and/or listing. 6. CONTRACT MOVERS: If the buyer wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, IRS WILL NOT ALLOW them to work on any premises unless they have placed with IRS or the auctioneer a satisfactory certificate of insurance, as determined by IRS in its sole discretion, protecting IRS, the auctioneer and seller(s) against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for such party's protection and not for the buyer's and therefore IRS and the auctioneer suggest that prospective bidders and buyers review the insurance policies of mover(s) regarding the coverage that they have protecting buyers and damage or loss of the items they may be moving for the buyer. IRS shall not, in any way, be responsible or liable for the actions or omissions or any mover or any similar third party retained or engaged by a buyer to move or deliver purchased item(s) and each buyer hereby releases IRS and its directors, officers, employees and agents from any and all such responsibility and/or liability and waives any claim against such parties in connection therewith.

7. ADJUSTMENTS: Errors in estimates of item inventory will be adjusted, but no adjustment will be made after the items have been removed from their place of sale, handled by the buyer or after the removal dates as listed on the sale invoice and announced by IRS or the auctioneer, as the case may be, at the start of the sale, whether or not the item has been removed. All adjustments must be authenticated and approved by IRS. In no cases will any adjustments be made after the item(s) has been removed from the auction or sale premises or sent for delivery to a buyer.

8. RESPONSIBILITY FOR NON-DELIVERY: Each of IRS, the auctioneer or the seller of an item shall not, in any event, be liable for non-delivery or for any other delivery matter, to any buyer of any item, other than for the return to the buyer of the deposit or sum paid for or in connection with such item, if any, that the buyer may be due. 9. LIABILITY AND INDEMNIFICATION: The risk of loss of any item passes to the buyer at the time the item is sold. The buyer will thereafter assume the risk of any damage, theft or any other loss with respect to the item. Buyers, bidders, participants and attendees acknowledge and understand that they are using the services provided by or through IRS at their own risk. Persons involved with or attending an auction or sale, whether as a bidder or otherwise, or removal of items assume all risks of damage of or loss to person and property and specifically release and indemnify IRS and the auctioneer from liability therefore. IRS, the auctioneer and the seller of an item shall not be liable by reason of any defect in or condition of the premises in which the auction or sale is held. Buyers shall defend and indemnify and hold IRS, the auctioneer and the seller of items(s) harmless from and against all claims and liabilities relating to the condition of, removal of, or use of the items purchased or failure of the buyer or a third party to follow instructions, warnings or recommendations of the manufacturer of an item, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, and Environmental Protection Agency requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. Further, the buyer assumes and agrees to indemnify, defend and hold harmless IRS, the auctioneer and the seller of an item for any future claim(s) pertaining to the fitness, merchantability, suitability for a particular purpose, or use of an item as purchased. Also, the buyer expressly waives any claim in respect to any possible future use of an item purchased for any purpose(s).

10. SAFETY DEVICES: IRS and the auctioneer makes no representation or warranty whatsoever that the items sold comply with OSHA standards, ANSI safety requirements, or any other industry or applicable safety standards. It is the buyer's responsibility that items purchased be equipped and safeguarded to meet any applicable safety standards before placing such items into operation. The buyer assumes all responsibility and shall indemnify IRS and the auctioneer against any claims, actions or liabilities arising out of or relating to any failure of the items sold hereunder to comply with such standards. 11. RECORDS: The record of sale(s) kept by the auctioneer and/or the IRS bookkeeper will be taken as final in the event of any dispute. All auctions are tape recorded for verification purposes. 12. INDEPENDENT CONTRACTOR: IRS and the auctioneer, as the case may be, is acting as an independent contractor only and is not responsible for the acts of its principals or sellers.

13. REMOVAL: No item can be removed during the auction or sale without the auctioneer's or IRS' approval. No item shall be removed unless paid for in full and all items purchased shall be removed as announced. The buyer shall be responsible for all costs of removal and shall be liable for any damages, including without limitation, any environmental laws and regulations and all requirements established by IRS or the auctioneer for the removal of items including requirements as to the bonding and insuring of movers. Upon failure of a buyer to remove items within the time announced, IRS and the auctioneer shall have the option of removing and storing the items at the expense and risk of the buyer and not refunding any deposits in which case IRS and the auctioneer may resell without notice at public sale or otherwise dispose of the items at risk and expense of the buyer. The buyer shall remain liable for loss, expense and damages arising from the buyers non-payment or other default. 14. RESERVE: IRS or the auctioneer, as the case may be, reserves the right to reject any and all bids or offers. On items upon which there is a reserve, IRS, consignors, the auctioneer, and/or any affiliated person or company, and/or their agents reserve the right to bid on behalf of the seller. IRS, consignors, the auctioneers or any affiliated person or company reserves, and/or their agents, reserves the right to consign items to an auction or sale and to participate as a bidder or buyer. IRS, the auctioneer, consignors, employees, assignees and/or their agents may bid for their own account at any auction or sale and may have information not otherwise available to the public regarding reserves, values or other material facts relating to the items which are the subject of the auction or sale. When an item i5 sold to the book, it may be sold, passed, withdrawn, returned to the seller or bought or brought in.

15. MISCELLANEOUS. These Customary Terms of Sale and any disputes relating thereto or any dispute among IRS, an auctioneer, a buyer, a bidder. User, or an attendee at an auction or sale shall be governed by the laws of the Commonwealth of Pennsylvania without giving any effect to any principles of conflicts of law. A buyer, bidder, participant or an attendee at an auction or sale hereby (i) consents to the exclusive jurisdiction and venue of the United States District Court for the Eastern District of Pennsylvania, or in the even that court lacks jurisdiction to hear a claim, in the Court of Common Please for Philadelphia County and (ii) agrees that it will not institute legal actions against IRS or an auctioneer in any other court or administrative body, without the express written permission of IRS and that if this provision is violated by such party, then such party shall be liable for all legal fees and expenses incurred by IRS in removing the case to another court or administrative body. If any part of these Customary Terms of Sale is determined to be invalid or unenforceable pursuant to applicable law including, but not limited to, the warranty disclaimer and liability provisions, set forth herein, then the invalid and unenforceable provisions will be deemed superseded by a valid, enforceable provision that most closely matches the intent of the original provision and the remained of the Customary Terms of Sale shall continue in effect. With respect to on premises auctions or sales, all bidders, buyers, attendees and other third parties participating or viewing an auction or entering an auction site hereby consent to the taking and use by IRS of photographs and audio and/or video recordings for use by IRS as it sees fit without the necessity of any release, consent, payment or any other compensation.

THANK YOU FOR ATTENDING OUR AUCTION! WE LOOK FORWARD TO SEEING YOU AT THE NEXT INDUSTRIAL RECOVERY SERVICES AUCTION OR SALE.

AUCTION ITINERARY

Due to the enormous size of this auction, this schedule is subject to change without notice, if the auctioneer deems it necessary. Folks, we may even need a 4th day!

DAY 1 - Lots 1 thru 539 and Lots 2660 and up (office furniture) DAY 2 - Lots 600 thru 1364 DAY 3 - Lots 1365 thru 2659

www.irsauctions.com

Copyright © Industrial Recovery Services 2005

This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein.

Lot Qty Description Lot Qty Description 1 1 BARREL OF EXTENSION CORDS 36 1 (3) MISC. TAP WRENCHES 2 1 REEL OF 1/4 AIR HOSE 37 1 LOT - 3 BOXES OF SAFETY 3 1 REEL OF 5/16" AIR HOSE EQUIPMENT 4 1 REEL OF ROPE 38 1 DUMONT - BROCH SET SMALL 5 1 PORTABLE AIR TANK 39 1 DUMONT - BROCH SET LARGE 6 1 BECKMAN - (2) AMP PROBES 40 1 LOT - MISC. BROCHES 7 1 (4) GAUGES 41 1 CENTRAL & YUASN - (2) SET 8 1 (5) GAUGES UP STANDS 9 1 (2) GAUGES 42 1 STARRETT - (2) SET UP 10 1 PASSPORT - (3) AIR STANDS QUALITY METERS 43 1 0 DEGREE & REAMERS 11 1 ENERGY EFFICIENCY SYSTEMS 44 1 CURV-O-MARK - CONTOUR MARKER COMPUTER 45 1 TAPMATIC - TAPING 12 1 ALNOR - VELOMETER ATTACHMENT 13 1 EXTECH - HUMIDITY TEMP. 46 1 KEY WAY CUTTERS METER 47 1 BORING BAR SET 14 1 OXOR II - OXYGEN ANALYZER 48 1 CEN-TECH - LOT - 15 1 ICC - LEAKCHECK CONTACK 0-1,1-2,2-3 MIC. SET PROBE 49 1 SNAP-ON - 1/4" TORKOMETER 16 1 CGM - (2) GAS DETECTION IN BOX METER 50 1 SNAP-ON - THIN WRENCH SET 17 1 LINEAR - HEAT GUN IN PACK 18 1 CAL PAL - TEMPERATURE 51 1 SNAP-ON - 1/2" TORKOMETER METER 52 1 SNAP-ON - (2) TORQUE 19 1 QUANTUM - GAS LEAK PROBE WRENCHES 20 1 POWER - DIGITAL 53 1 JIL - (2) 4-5, 5-6 TECHOMETER MICROMETER 21 1 OMEGA - HUMIDITY METER 54 1 STARRETT - SET INSIDE 22 1 DWYER - VELOCITY METER MIC. 23 1 ALNOR - VELOMETER 55 1 STARRETT EP24 - LEVEL 24 1 DYMAC - TRANSDUCERS 56 1 STARRETT 722 - DIGITAL 25 1 DYMO - TIME & COST CALIPER CUTTING SYSTEM 57 1 STARRETT - 18" 26 1 (5) DIGGING & PRY BARS COMBINATION SET 27 1 (19) OPEN & BOX END 58 1 DIAL CALIPER 6" WRENCHES 59 1 DIAL CALIPER 12" 28 1 RACHET & SOCKETS 3/4 DRIVE 60 1 MITUTOYO - DIAL CALIPER 29 1 (2) 18" X 24" ADJUSTABLE 61 1 AIR CONDINATION KIT WRENCHES 62 1 SKATE SET 30 1 BURNDY - (2) LARGE WIRE 63 1 CM - CHAIN COME-A-LONG ALUM. CRIMPERS 64 1 CM - CHAIN COME-A-LONG 31 1 JET & RIGID - (3) 18" X 65 1 BEEBE - CHAIN COME-A-LONG 24" ALUM. PIPE WRENCHES 66 1 SLAGE HAMMER 32 1 LOT - MISC. TAP & DIE'S & 67 1 (4) CONDUCT BENDERS WRENCHES 68 1 LARGE BOLT CUTTERS 33 1 SVA - TAP & DIE SET 69 1 LIFTING CHAIN 34 1 TRIUMPH - TAP & DIE SET 70 1 LIFTING CHAIN 35 1 VERMONT - TAP & DIE SET 71 1 HILTI TE15 - HAMMER DRILL

72 1 HILTI TE52 - HAMMER DRILL 114 1 POWERTEAM - (4) 5 TON 73 1 MILWAUKEE - HD JIG SAW SMALL JACKS 74 1 MILWAUKEE - HD DISC 115 1 (2) SHOP VACS GRINDER 116 1 (3) 10 LBS CABLE 75 1 MILWAUKEE - 1/2" MAGNET RETRACKERS DRILL 117 1 HOSE CLAMPS 76 1 GREENLEE - HYD. KNOT OUT 118 1 COIL HOSE 8824 - (4) KIT PNEUMATIC FILTERS 77 1 HONEYWELL TP970 - 119 1 COIL HOSE 8804G - (4) THERMOSTAT KIT PNEUMATIC FILTERS 78 1 COMPUTER TERMINAL KIT 120 1 COIL HOSE 8824D - (3) 79 1 RIGID - PIPE THREADER PNEUMATIC FILTERS 80 1 PIPE VISE 121 1 COIL HOSE 8844 - (3 81 1 PORT-A-POWER PNEUMATIC OILER 82 1 (3)24" X 18" PIPE WRENCH 122 1 COIL HOSE 8846 - (2) 83 1 (2)18" PIPE WRENCH PNUEMATIC FILTER 84 1 RIDGID - 36" PIPE WRENCH 123 1 COIL HOSE 8826 - PNEUMATIC 85 1 RIDGID - 48" PIPE WRENCH FILTER 86 1 (3) CHAIN WRENCHES 124 1 COIL HOSE 8806G - (2) 87 1 RAILROAD JACK PNEUMATIC REGULATOR 88 1 LOT - CABINET OF DRILL 125 1 NORGREW - (2) PNEUMATIC BITS LUBRICATOR 89 1 (3)BOLTS, SET SCREWS, ROLL 126 1 (8) PNEUMATIC REGULATORS PINS 127 1 LOT - BUCKET OF TOOLS 90 1 LOT - MISC. WIRE 128 1 HILTI - POWDER ACTUATED 91 1 CABINET OF METRIC TAPS SYSTEM 92 1 CABINET OF US TAPS 129 1 HILTI DX36M - POWDER 93 1 CABINET OF US TAPS ACTUATED SYSTEM 94 1 CABINET OF METRIC TAPS 130 1 BRASS SCRAPERS 95 1 CABINET (EMPTY) 131 1 STAR - POWER ACTUATED 96 1 (3)NUMBER STAMPS SETS SYSTEM 97 1 (2)LETTER STAMPS SETS 132 1 (4) RIVIT GUNS 98 1 AIR GRINDING WHEELS 133 1 DYNABRADE - PNEUMATIC CUT 99 1 GEMINI - AIR GRINDING OFF TOOL WHEELS 134 1 (2) LEAK DOWN TESTER 100 78 CUT OFF WHEELS 135 1 SANDFLEX - HOLE SAW SET 101 1 TUBING BENDER 136 1 (2) METAL CABINETS 102 1 CIRCLE CUTTER & FLAIRING 137 1 CM - MINI CHAIN HOIST 500 TOOLS LB. 103 1 CHAIN BRAKERS 138 1 HYDE - BRASS SCRAPERS 104 1 LOT - HOLE PUNCHER 139 1 PNEUMATIC FITTING 105 1 MISC. BOX 140 1 BOX OF TORCH TIPS 106 1 LOT - DRILLS 141 1 LOT - BOX PNEUMATIC 107 1 MOTOROLA P110 - (4)RADIOS FITTING 2-WAY 142 1 LOT - BOX SAW BLADES 108 1 SKIP TO THE NEXT LOT (METAL) 109 1 EASY OUTS 143 1 MILBAR 50R - SPRING CLIP 110 1 SNAP-ON - GEAR PULLER SET PLIERS 111 1 EXCELL - CREEPER 144 1 SKINNER - VALUE SEATING 112 1 INTERPACK - PORTER POWER TOOL 113 1 INTERPACK - (2)LITTLE 145 1 INGERSOLL-RAND - JACKS PNEUMATIC 1/2" DRILL

146 1 PNEUMATIC HD GRINDER 183 1 GRACO - (6) PAINT HOSE 147 1 PNEUMATIC JACK HAMMER (BLUE) 148 1 PNEUMATIC CHISEL 184 1 GRACO - (7) PAINT HOSE 149 1 AERO-GO - (4) PNEUMATIC 1 (BRAIDED) TON JACKS 185 1 ARO - VACUUM PUMP 150 1 PNEUMATIC CHISEL GUNS & 186 1 ARO - VACUUM PUMP PARTS 187 1 GRACO - PAINT PUMP 151 1 MAKITA 9403 - 4" BELT 188 1 GRACO - PUMP SANDER 189 1 ARO - VACUUM PUMP 152 1 BLACK/DECKER - DRIVER 190 1 PIPE HOLDER & VISE 153 1 BLACK/DECKER 4027 - 3" 191 1 (3) LEVELS MISC. BELT SANDER 192 1 (3) LEVELS MISC. 154 1 BLACK/DECKER 7392 - 7 1/4" 193 1 (2) 24" LEVELS SAW 194 1 REALIST - TRANSIT 155 1 DEWALT DW660 - CUT OFF 195 1 (3) DRY WALL SQUARES TOOL 196 1 GRACO - TEST BOX 156 1 EASTMAN - CUTTER 197 1 WORK BENCH W/VISE 157 1 DEWALT - 1/2" DRILL 198 1 WORK BENCH W/VISE 158 1 MILWAUKEE - HD GRINDER 199 1 WORK BENCH NO VISE 159 1 PORTER/CABLE - BATTERY 200 1 (5) FOLD UP TABLES DRILL 201 1 JET JBG-8A - BENCH GRINDER 160 1 HILTI - 1/2" HAMMER DRILL 202 1 C-CLAMPS (8) 1-CALIPER 161 2 DEWALT DW988 - BATTERY 203 1 LIFTING DEVICE DRILLS 204 1 (5) TUBES OF BRASS ROD AND 162 1 HD GRINDER PVC STOCK 163 1 MILWAUKEE - PORTABLE HACK 205 1 DRIVER - BENCH GRINDER SAW 206 1 LITHONIA - (5) H.I.D. 164 1 DEWALT - 12" MITER SAW LIGHTING FIXTURE REFLECTOR 165 1 PLUMBERS TORCH 207 1 (2) FANS-AIR MASTER & 166 1 STIHL - CHAIN SAW DAYTON 167 1 VACUUM PUMP 208 1 DAKE - HYD. PRESS 168 1 ROLLER LACER - BELT 209 1 DAKE 702 - ARBOR PRESS FASTENER SYSTEM 210 1 DOALL D-8 - SURFACE 169 1 GRACO - LOT - (12) BOXES GRINDER OF PUMP PARTS 211 1 ROYAL 1860 - LATHE 170 1 GRACO - PAINT GUN 212 1 BOX OF LATHE EQUIP. 171 1 GRACO - PAINT GUN 213 1 XER-KUL 29601000 - POWDER 172 1 GRACO - PAINT GUN METAL SPRAY SYSTEM 173 1 GRACO - PAINT GUN 214 1 EUTAUOY - POWDER METAL 174 1 GRACO - PAINT GUN SPRAY SYSTEM 175 1 SHARPE - PAINT GUN 215 1 EUTAUOY - POWDER METAL 176 1 BINKS - PAINT CUP SPRAY SYSTEM 177 1 DEVILBISS - (4) PAINT 216 1 WORK BENCH W/VISE & STOCK PARTS 217 1 SUPERMAX - MILLNG MACHINE 178 1 GRACO - FILTER 218 1 LOT - CABINET OF PARTS 179 1 GRACO - (6) PAINT GUN 219 1 DIVIDING HEAD (MILL) (USED) 220 1 COLLAT INDEX HEAD (MILL) 180 1 GRACO - PAINT HOSE 1/2" 221 1 (2) TILTING VISES (MILL) 181 1 GRACO - (6) PAINT HOSE 222 1 YIYEN - ROTARY TABLE (RED) (MILL) 182 1 GRACO - (6) PAINT HOSE 223 1 (2) TABLES (MILL) (BLUE) 224 1 BOX OF DRILLS

225 1 BOX OF REAMERS 261B 1 WOOD POWER PRODUCTS T60 - 226 1 GRIZZY 1860 - LATHE GRINDER, MAGNET, INFEED 227 1 BOX OF LATHE PARTS AND OUTFEED CONVEYOR 228 1 BOX OF DRILLS 261C 1 GALBREATH PF6055 - 229 1 WORK BENCH W/VISE & COMPACTOR CABINET 262 1 FOLLOW OUTSIDE TO DUMP 230 1 METAL CUTTING BAND SAW TRUCK 231 1 LODESTAR - ELEC. 1 TON 263 1 CHEVY C-60 - 1979 CHEVY CHAIN HOIST DUMP TRUCK MILES: 32039 232 1 LOT - BAR STOCK & RACKING 264 1 CONDUIT 233 1 TORCH SET 265 1 FOLLOW TO SHED 234 1 BUILD-ALL T-26 - PARTS 266 1 LOT - 2 WEED EATERS WASHER 2-TRIMMERS & STUFF 235 1 DAYTON & KENNEDY TOOL BOX 267 1 GREAT DANE - TRAILER 1990 W/TOOLS 65,000 LBS. VIN: 0211 236 1 NAPA & WATERLOO TOOL BOX 268 1 TRAILMOBILE - TRAILER W/TOOLS 1988 VIN: 2157 237 1 DAYTON & NAPA TOOL BOX 269 1 TRAILMOBILE - TRAILER W/TOOLS 1988 VIN: 2158 238 1 NAPA TOOL BOX W/TOOLS 270 1 TRAILMOBILE - TRAILER 239 1 GRACO - PAINT SYSTEM ON 1988 VIN: 2159 WHEELS 270A 1 MACK VG6M113XX - YARD 240 1 GRACO - PUMP ON WHEELS TRACTOR 152,606 MILES 241 1 GRACO 204722 - PUMP 271 1 6" BELT SANDER 242 1 SPEEFLO 731331 - PUMP 272 1 HOBART TR-300 - ARC WELDER 243 1 SPEEFLO 731331 - PUMP 273 1 WELD BENCH W/VISE & TOOLS 244 1 GRACO - PUMP 274 1 WELDING RODS 245 1 GRACO 205038 - PUMP 275 1 HOBART MIG 200 - MIG 246 1 GRACO 205038 - PUMP WELDER 247 1 GRACO - PUMP 276 1 HYPERTHERM 900 - PLASMA 248 1 GRACO - PUMP CUTTER 249 1 GRACO - PUMP 277 1 JET 68032 - DRILL PRESS 250 1 GRACO 204 - PUMP 278 1 DEWALT - CUT OFF SAW & 251 1 GRACO 207707 - PUMP TABLE 252 1 MIXER PUMP 279 1 DAYTON 42909B - 8" BENCH 253 1 GRACO 204722 - PUMP GRINDER 254 1 LOT - (7) ROWS-SHELVES & 280 1 WALLER TURNER - TABLE SAW PARTS 281 1 NATIONAL - METAL BRAKE 255 1 LOT - (6) ROWS-SHELVES & 282 1 TENNSMITH SR48 - METAL PARTS ROLLER 256 1 LOT - FAN BELTS 283 1 TENNSMITH T52 - METAL 257 1 LOT - (11) ROWS-SHELVES & SHEARER PARTS 284 1 2-FANS 1-FLOOD LIGHT 258 1 LOT - (4) ROWS-SHLEVES & 285 1 JUST RITE - SAFETY PARTS (LIGHTS) CABINET 259 1 LOT - ROOM-TV CHAIRS 286 1 TABLE & CHAIRS 1-FILE 260 1 LOT - CABINET ROOM-MISC.-FREQ.-TABLE, 287 1 RIDGID 300 - POWERED PIPE CHAIRS, LOCKERS THREADER 261 1 ROOM-DESKS & CHAIRS, 288 1 WORK BENCH W/PIPE VISE CABINETS 289 1 JOHNSON - METAL BAND SAW 261A 1 DESK, SHELF, (2)WOOD 290 1 RIDGID 535 - POWERED PIPE CABINETS (1)FILE CABINET THREADER & STAND

291 1 2-SETS OF METAL LOCKERS 325 1 PEABODY TEC TANK - METAL 292 1 LOT - 6- C-CLAMPS SAW DUST TANK & AUGER 293 1 LOT - 3-C CLAMPS 326 1 24' AUGER TRANSFER 294 1 VICE GRIPS - LOT - 3-VICE 327 1 10' DOUBLE AUGER TRANSFER GRIP PLIERS 328 1 13 1/2" AUGER 3HP 295 1 MAKITA 9523 - ANGLE HEAD 329 1 PSI 15X15 - PNEUMATIC GRINDER KNIFE ROTARY VALVE 296 1 MAKITA 9503 - ANGLE HEAD 330 1 24' 3HP AUGER GRINDER 331 1 PSI 15X15 - PNEUMATIC 297 1 MILWAUKEE - 3/8" DRILL KNIFE ROTARY VALVE 298 1 VISE GRIPS - LOT - 332 1 ACRISON 1052FF2 - FEEDER 3-CLAMPS 333 1 SECURALL - SAFETY CABINET 299 1 VISE GRIPS - LOT - 3 334 1 (5) CABINETS CLAMPS 335 1 BARREL TRUCK 300 1 VISE GRIPS - LOT - 3 LONG 336 1 BERG - SAFETY LADDER 39" JAW CLAMP 337 1 WERNER - 6' LADDER 301 1 NAPA - AIR CHISHEL 338 1 WERNER - 6' LADDER 302 1 INGERSOLL-RAND - AIR 339 1 HELPER HANDLE - LIFT DRILL 340 1 WERNER - EXTENSION LADDER 303 1 MITY MIGET - (3)- AIR 341 1 JACKSON - WHEEL BARREL SANDERS 342 1 FOLLOW OUTSIDE 304 1 (2) DIE GRINDERS 343 1 PNEUMAFIL 33960 - DUST 305 1 AIR SANDER COLLECTOR 306 1 LOT - MAGNET-HAMMERS-ADJ. 344 1 PNEUMAFIL - DUST WRENCHES COLLECTOR 307 1 LOT - PUNCHER, DRILLS, & 345 1 DUMPER SQUARES 346 1 DUMPER 308 1 LOT - SOCKETS & WRENCHES 346A 1 PSI - STEEL TIP ROTARY 309 1 LOT - BOX OF PLIERS & VALVE 2HP MISC. TOOLS 346B 1 CLARKS DR16X12 - ER-FEEDER 310 1 LOT - TOOL BELT & TOOLS 2HP 311 1 LOT -(4)-BOXES OF MISC. 347 1 WING - AIR MAKE UP UNIT TOOLS (SIZE 20-1) 312 1 LOT - RIVITS & MISC. TOOLS 348 1 (8)-YELLOW TRASH CANS (4) BOXES 349 1 (2) STEEL RACK & STEEL 313 1 LOT - SAFETY HELMETS 350 1 OUTSIDE MAINTENANCE CAGE 314 1 LOT - (3) WELDING HELMENTS 351 1 FOLLOW THE AUCTIONEER 315 1 LOT - (3) BOXES-WELDING 352 1 CYCLONE - DUST COLLECTOR HAMMERS, TORCH PARTS 353 1 AMERICAN - 2000 LB - 32"X 316 1 LOT - COME-A-LONG & 60" SCISSOR LIFT GRINDING WHEELS 354 1 SCMI Z32 - PANEL SAW 317 1 SPEED AIR - AIR HOSE 355 1 REYTON ANDERSON - 3HP CRIMPING TOOL & PULLER SWING ARM CUT OFF SAW 318 1 CHICAGO - AIR SLAG HAMMER 356 1 BULK BID LOT 356-359 - 319 1 MILWAUKEE - JIG SAW COMSTAR IRVINGTON MOORE 320 1 TORCH SET GRADING LINE 321 1 MILWAUKEE - SAWALL 357 1 *DESTACKER LINE 322 1 DIRT DEVIL - VACUUM 358 1 *GRADING LINE CLEANER 359 1 *STACKER LINE 323 1 CYCLONE - UTILITY PUMP & 360 1 JUSTRITE - (2) FIRE TOOL POUCH CABINETS 324 1 FOLLOW OUTSIDE 361 1 LOT - 6-PEDASTAL FANS

362 150 FACTORY CARTS (150) 392 1 SUBARU ST. WGN - 2001 363 1 EXCEL PNEW MACHINE CO - SUBARU STATION WAGON VIN: 23" X 25" (2000) 364 1 NED KURT M50-55 - WET 393 1 HOBART SF-200 - WELDER CUTTER 5 1/2HP HONDA 394 1 JOHN DEER 455 - JOHN DEER 365 1 INGERSOLL-RAND - 1/2 TON TRACTOR W/PLOW & MOWER ELEC. CHAIN HOIST DECK 366 1 BIG SAFETY CAGE 395 1 4 WHEEL TRAILER 367 1 EXCEL PNEUMATIC 15X15 - 396 1 FIMCO - 2 WHEEL SPRAYER STEEL TIP ROTARY VALVE 397 1 JOHN DEER - 21" MOWER 6HP 368 1 PAINT POT 398 1 STIHL - WEED EATER 369 1 TIRE CHAINS 399 1 POULAN 210 - CHAIN SAW 370 1 WARNER - 8' STEP LADDER 400 1 STIHL 028AV - CHAIN SAW 371 1 FOLLOW THE AUCTIONEER 401 1 HUSQUORNA 51 - CHAIN SAW 372 1 FORD F250 4X4 - 2004 FORD 402 1 LARGE SAFETY CAGE F250 4 X 4 W/PLOW VIN: 69984 403 1 BANDING CART 404 96 FACTORY CARTS 373 1 FORD F250 4X4 - 1989 FORD 405 50 FACTORY CARTS F250 4X4 W/PLOW VIN: 54567 406 50 FACTORY CARTS 374 1 FORD F350 - 1985 FORD F350 407 50 FACTORY CARTS W/PLOW VIN: 56133 408 50 FACTORY CARTS 375 1 FORD F250 4X4 - 1974 FORD 409 100 FACTORY CARTS F250 4X4 W/PLOW VIN: 12017 410 50 FACTORY CARTS 376 1 INTERNATIONAL - 1974 411 50 FACTORY CARTS INTERNATIONAL VIN:15731 412 100 FACTORY CARTS 377 1 HYSTER XL2 - 2000 HYSTER 413 100 FACTORY CARTS FORK LIFT XL2 414 100 FACTORY CARTS 378 1 HYSTER XL2 - 2000 HYSTER 415 100 FACTORY CARTS FORK LIFT XL2 416 100 FACTORY CARTS 379 1 HYSTER H225E - HYSTER FORK 417 100 FACTORY CARTS LIFT 418 100 FACTORY CARTS 380 1 HYSTER H225E - HYSTER FORK 419 50 FACTORY CARTS LIFT 420 50 FACTORY CARTS 381 1 HYSTER H250H - HYSTER FORK 421 75 FACTORY CARTS LIFT 422 60 FACTORY CARTS 382 1 JOHN DEER 455G - JOHN DEER 423 60 FACTORY CARTS FORK LIFT 424 40 FACTORY CARTS 383 1 JCB 505-19 - LOADALL 425 161 BOXED CARTS (TURBO) 426 140 SKIDS 384 1 CATERPILLAR D50B - FORK 427 45 BOXED SKIDS LIFT 5000 LB 428 1 FOLLOW TO HYSTER SHOP 385 1 HYSTER 30XL - FORK LIFT 429 1 WATER & OIL CANS 386 1 GEHL 4635DXT - FRONT END 430 1 STEP LADDER & CREEPER LOADER 431 1 2-SHELVES & CONTENTS 387 1 SNOW PLOW FOR FRONT END 432 1 BAUER - STEP LADDER LOADER 433 1 CAMPBELL HAUSFELD - AIR 388 1 FORKS FOR FRONT END LOADER COMPRESSOR (PORTABLE) 389 1 BRUSH FOR FRONT END LOADER 434 1 NAPA - PORTABLE AIR TANK 390 1 SKY JACK SJKB3311 - AERIAL 435 1 POWER PORT - 2-HOSE REELS LIFT 436 1 4-JACK STANDS & WHEEL STEP 391 1 CHRYSTLER 2003 T&C MINIVAN 437 1 NAPA - 3 1/2 TON - JACK/TRANS

438 1 LINCOLN - 2-TON FLOOR 469 1 DIE GRINDER & TOOLS JACK 470 1 CHAMBERLAIN - 439 1 3-BOTTLE JACKS & SMALL POLISHMASTER FLOOR JACK 471 1 C-CLAMPS (4) 440 1 10 TON FLOOR JACK 472 1 VISE GRIPS - VICE CLAMPS 441 1 LOT - 1 3/16" TO 2" OPEN & BOX END WRENCHES 473 1 SHARPE 975HVLP - PAINT GUN 442 1 LOT - SAE WRENCH SET 474 1 MAKITA 2414 - CUT OFF SAW RACHET ENDS 474A 1 METRIC WRENCH SET OPEN & 443 1 LOT - SAE WRENCH SET BOX RACHET ENDS RACHET ENDS 474B 1 METRIC WRENCH SET OPEN & 444 1 3- LIGHT CORD REELS & BOX RACHET ENDS CROSS WRENCHES 475 1 MISC. GRINDING WHEELS 445 1 NAPA - 2- NAPA & 1- 476 1 DEWALT DW402 - ANGLE SPRING METAL BOXES GRINDER 446 1 LOT - NUT & BOLT CABINET & 477 1 AIR TOOLS (4) 2 SMALL ONES 478 1 METAL WORK BENCH & VISE 447 1 NAPA - LOT - NAPA METAL 479 1 SLEDGE HAMMERS (2) CABINET 480 1 NAPA - AC-DC WELDER 448 1 K-D - SNAP RING SET 481 1 POWERMATIC - BENCH 449 1 RUBBER STRAPS GRINDER 1HP 450 1 CHAIN LOT 482 1 WEATHERHEAD - HYD. HOSE 451 1 TORCH SET MAKER & CABINET & HOSES 452 1 SUNEX - 16 SPEED DRILL 483 1 UPSTAIRS LOFT PRESS 484 1 7.5HP HYDR. FORK LIFT 453 1 LOT - 3 FANS HOIST 454 1 NAPA - HOT & COLD DIESEL 485 1 LOT - MISC. TIRES PRESSURE WASHER 486 1 265/700-16.5 (2) TIRES & 455 1 EXCALIBUR - MOTOR LIFT RIMS 4000 LB. 487 1 TIRE & RIM (1) 15.5 X 25 456 1 VENTURO - 8000 LB. MOTOR 488 1 TIRES & RIMS (3) 10.00 X LIFT 457 1 REBUILT DETROIT MOTOR FORK 489 1 TIRES & RIMS (3) 10.00 X LIFT 458 1 LARGE TIRE JACK 490 1 TIRES & RIMS (3) 10.00 X 459 1 2-1000 X 20 T900 FORK LIFT TIRES 491 1 TIRES & RIMS (3) 10.00 X 460 1 NAPA - SPECIAL EDITION TOOLS & TOOL BOX 492 1 MISC. TIRES & RIMS (4) 461 1 BOLT CUTTERS 493 1 PNEUMAFIL 6.5-90-10 - 462 1 CM - CHAIN COME-A-LONG PNEUMAFIL TO SMALL TORIT 3-TON W/CITY FAN BLOWER/SIZE 919 463 1 CHAINS & ABLE COME-A-LONG S/N89-73063-1-2 464 1 DRILL DOCTOR - DRILL 494 1 WRIGHT - DUMPING HOPPER SHARPNER 495 1 WESTERN PNEUMATIC 465 1 DEWALT DW303 - SAWALL 7821-4500 - BLOWER W/(2) 466 1 DEWALT DW955 - PORTABLE 90 FILTERS 75 HP MOTOR DEGREES ANGLE DRILL 496 1 SUTORBILT - BLOWER/W(2) 467 1 SOLAR - BATTERY BOOSTER FILTERS 25 HP MOTOR PACK 497 1 ARGER CONVEYOR APPROX. 468 1 NAPA X25 - 12 V BATTERY 15' LONG CHARGER 498 1 EXCEL PNEU 15X15 - ROTARY VALVE STEEL TIPPED 5 HP

499 1 AUGER CONVEYOR APPROX. 30' 534 1 YARD OFFICE TRAILER 500 1 7 1/2 HP - PHELPS FAN 535 1 IRVINGTON MOORE - KILN 501 1 7 1/2 HP - PHELPS FAN 50,000 BF 502 1 7 1/2 HP - PHELPS FAN 536 1 AMERICAN WOOD DRYES - 503 1 CLARKES 2 HP - ROTARY SHARED WALL VALVE STEEL TIPPED 537 1 PART OF LOT 536 - 504 1 METERING BIN - MOTORS (5) 538 1 TRACK BANK KILN #1 - 2 HP EACH KILNS (8) 505 1 WERNER - EXTENSION LADDER 539 1 TRACK BANK KILN #2 - 24' KILNS (8) 506 1 LAIDIG SYSTEM - WITH 16' 600 1 LOT - BRUSHES & SHOVELS AUGER CONVEYOR 601 1 LOT - BRUSHES & SHOVELS 507 1 PARTS FOR DUST SYSTEM 602 1 LOT - BRUSHES & SHOVELS 508 1 WERNER - STEP LADDER 6' 603 1 LOT - CART OF AIR HOSES 509 1 CHAIN DUST CONVEYOR 604 1 LOT - 6 - HAMMERS APPROX. 15' LONG 3 HP 605 1 LOT - 6 - HAMMERS 510 1 DUST COLLECTOR 606 1 LOT - 6 - HAMMERS 511 1 DUST COLLECTOR 607 1 LOT - 6 - HAMMERS 512 1 DUST COLLECTOR 608 1 LOT - 6 - HAMMERS 513 1 DUST COLLECTOR 609 1 LOT - 6 - HAMMERS 514 1 DUST COLLECTORS 610 1 LOT - 6 - HAMMERS 515 1 DUST COLLECTORS 611 1 LOT - 6 - HAMMERS 516 1 DUST COLLECTORS 612 1 LOT - 6 - HAMMERS 517 1 LOUISVILLE - 10' STEP 613 1 LOT - 6 - HAMMERS LADDER 614 1 LOT - 6 - HAMMERS 518 1 TORIT - DUST COLLECTOR 615 1 LOT - 6 - HAMMERS 519 1 PSI - STEEL TIPPED ROTARY 616 1 LOT - 6 - HAMMERS VALVE 617 1 LOT - 6 - HAMMERS 520 1 WEBER - VIBRITORY 618 1 LOT - 6- HAMMERS CONVEYOR APPROX. 48' LONG 619 1 LOT 6 - HAMMERS 521 1 AUGOR CONVEYOR APPROX. 45' 620 1 LOT - 6 - HAMMERS LONG 621 1 LOT 6 - HAMMERS 522 1 AUGOR CONVEYOR APPROX. 10' 622 1 LOT - 6 - HAMMERS LONG 5 HP 230/460 623 1 LOT - 6 - HAMMERS 523 1 EXCEL - HIGH PRESSURE 624 1 LOT - 6 - HAMMERS PUMP W/FILTER 60 HP 625 1 LOT - 6 - HAMMERS 524 1 EXCEL PNEU. 25X25 - STEEL 626 1 LOT - 6 - HAMMERS TIPPED ROTARY VALVE 627 1 LOT 6 - HAMMERS 525 1 EXCEL PNEU. 816 - HIGH 628 1 LOT 6 - HAMMERS PRESSURE PUMP W/FILTER 629 1 LOT 6 - HAMMERS 526 1 PSI 25X25 - STEEL TIPPED 630 1 LOT 6 - HAMMERS ROTARY VALVE 631 1 LOT - 6 - HAMMERS 527 1 DUMPING HOPPER 632 1 LOT - 6 - HAMMERS 528 1 RUBBER BELT SCRAP CONVEYOR 633 1 LOT 6 - HAMMERS APPROX 65' 18" BELT 634 1 LOT 6 - HAMMERS 529 1 WERNER - EXTENSION LADDER 635 1 LOT 6 - HAMMERS 13' 636 1 LOT - 6 - HAMMERS 530 1 WERNER - STEP LADDER 4' 637 1 LOT 6 - HAMMERS 531 1 WHEEL BARROW 638 1 LOT 6 - HAMMERS 532 1 CRAFTSMAN - TOOL BOX TOP 639 1 LOT - 6 - HAMMERS & BOTTOM 640 1 LOT - BOX OF FILES 533 1 FIRETEK 240 - SYSTEM 641 1 LOT - BOX OF FILES

642 1 LOT - BOX OF FILES 687 1 LOT - 6 - PIPE &/OR BAR 643 1 LOT - BOX FILES CLAMPS 644 1 LOT - BOX OF SCREW DRIVERS 688 1 LOT - 6 - PIPE &/OR BAR 645 1 LOT - BOX OF FILES CLAMPS 646 1 LOT - BOX OF SCREW DRIVERS 689 1 LOT - 6 - PIPE &/OR BAR 647 1 LOT - BOX OF SCREW DRIVERS CLAMPS 648 1 LOT - BOX OF BLOW GUNS 690 1 LOT - 6 - PIPE &/OR BAR 649 1 LOT - BOX OF BLOW GUNS CLAMPS 650 1 LOT - BOX OF BLOW GUNS 691 1 LOT - 6 - PIPE &/OR BAR 651 1 LOT - BOX OF BLOW GUNS CLAMPS 652 1 LOT - BOX OF CHISELS 692 1 LOT - 6 - PIPE &/OR BAR 653 1 LOT - BOX OF CHISELS CLAMPS 654 1 LOT - BOX OF CHISELS 693 1 LOT - 6 - PIPE &/OR BAR 655 1 LOT - BOX OF CHISELS CLAMPS 656 1 LOT - 6 - C CLAMPS 694 1 LOT - 6 - PIPE &/OR BAR 657 1 LOT - 6 - C CLAMPS CLAMPS 658 1 LOT - 6 - C CLAMPS 695 1 LOT - 6 - PIPE &/OR BAR 659 1 LOT - 6 - C CLAMPS CLAMPS 660 1 LOT - 6 - C CLAMPS 696 1 LOT - 3 - WOOD BAR CLAMPS 661 1 LOT - 6 - C CLAMPS 697 1 LOT - CART OF SAND PAPER 662 1 LOT - 6 - C CLAMPS 698 1 LOT - BOX OF IRONS 663 1 LOT - 6 - C CLAMPS 699 1 LOT - BOX OF HEATERS 664 1 LOT - 6 - C CLAMPS 700 1 LOT - BOX OF HEATERS 665 1 LOT - 6 - C CLAMPS 701 1 LOT - BOX OF HEATERS 666 1 LOT - 6 - C CLAMPS 702 1 LOT - BOX OF HEATERS 667 1 LOT - 6 - C CLAMPS 703 1 LOT - BOX OF TAPE 668 1 LOT - 6 - C CLAMPS 704 1 LOT - BOX OF GROUND WIRES 669 1 LOT - 6 - C CLAMPS 705 1 LOT - BOX OF GROUND WIRES 670 1 LOT - 6 C CLAMPS 706 1 LOT - BOX OF GROUND WIRES 671 1 LOT - 6 - C CLAMPS 707 1 LOT - BOX OF GROUND WIRES 672 1 LOT - 6 - C CLAMPS 708 1 LOT - BOX OF GROUND WIRES 673 1 LOT - 6 - C CLAMPS 709 1 LOT - 3-TAPE MACHINES 674 1 LOT - 6 - C CLAMPS 710 1 LOT - CART FULL 675 1 LOT - 6 - C CLAMPS MISCELLANEOUS 676 1 LOT - 6 - C CLAMPS 711 1 LOT - DOUBLE PAD AIR 677 1 LOT - 6 - C CLAMPS SANDERS 678 1 LOT - 6 - C CLAMPS 712 1 LOT - DOUBLE PAD AIR 679 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 713 1 LOT - DOUBLE PAD AIR 680 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 714 1 LOT - DOUBLE PAD AIR 681 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 715 1 LOT - DOUBLE PAD AIR 682 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 716 1 LOT - DOUBLE PAD AIR 683 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 717 1 LOT - DOUBLE PAD AIR 684 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 718 1 LOT - DOUBLE PAD AIR 685 1 LOT - 6 - PIPE &/OR BAR SANDERS CLAMPS 719 1 LOT - DOUBLE PAD AIR 686 1 LOT - 6 - PIPE &/OR BAR CLAMPS SANDERS

720 1 LOT - DOUBLE PAD AIR 747 1 2 BOXES OF GLUE SANDERS 748 1 JET-WELT - ELECTRIC GLUE 721 1 LOT - DOUBLE PAD AIR GUN SANDERS 749 1 LOT - CART OF AIR HOSES 722 1 LOT - DOUBLE PAD AIR 750 1 LOT - CART OF EXTENSION SANDERS CORDS 723 1 LOT - DOUBLE PAD AIR 751 1 CM - 3 TON CHAIR COME A SANDERS LONG 724 1 LOT - DOUBLE PAD AIR 752 1 CM - 3 TON CHAIR COME A SANDERS LONG 725 1 LOT - DOUBLE PAD AIR 753 1 CM - 3 TON CHAIR COME A SANDERS LONG 726 1 LOT - DOUBLE PAD AIR 754 1 LOT - BOX OF GREASE GUNS SANDERS 755 1 LOT - BOX OF HOLE SAWS 727 1 LOT - DOUBLE PAD AIR 756 1 LOT - PACK OF DRILLS & SANDERS TUBING BENDER 728 1 LOT - DOUBLE PAD AIR 757 1 LOT - GEAR PULLERS SANDERS 758 1 BRANSON 3510 - SMALL PARTS 729 1 LOT - DOUBLE PAD AIR CLEANER SANDERS 759 1 WAYNE - 115V UTILITY PUMP 730 1 LOT - DOUBLE PAD AIR 760 1 PORTER/CABLE 9740 - SAWALL SANDERS 761 1 CABLE COME A LONG 731 1 LOT - DOUBLE PAD AIR 762 1 2-SNAP & O RINGS BOXES SANDERS 763 1 BOSCH 1578AVS - VARIABLE 732 1 LOT - DOUBLE PAD AIR SPEED JIG SAW SANDERS 764 1 MILWAUKEE - PORTABLE HD 733 1 LOT - DOUBLE PAD AIR BAND SAW SANDERS 765 1 MILWAUKEE - SAWALL 734 1 LOT - DOUBLE PAD AIR 766 1 BOX OF ELECTRIC METERS SANDERS 767 1 HILTI - 1/2" REVERSIBLE 735 1 LOT - DOUBLE PAD AIR HAMMER DRILL SANDERS 768 1 HILTI - POWERED FASTENING 736 1 LOT - DOUBLE PAD AIR SYSTEM SANDERS 769 1 KENNEDY - TOOL BOX & 737 1 LOT - DOUBLE PAD AIR TOOLS SANDERS 770 1 CRAFTMAN - TOOL BOX & 738 1 LOT - DOUBLE PAD AIR TOOLS SANDERS 771 1 3/4" DRIVE RATCHET SET 739 1 LOT - DOUBLE PAD AIR 772 1 1/2" TORQUE WRENCHES SANDERS 773 1 WELLER - SOLDERING GUN & 740 1 LOT - DOUBLE PAD AIR FISH WIRE SANDERS 774 1 LITTLE GIANT - TAP & DIE 741 1 KARCHER 360 - LOT - SET ELECTRIC PRESSURE WASHER 775 1 18" & 24" ADJUSTABLE 742 1 LOT - BOX OF DRILL BITS WRENCHES 743 1 LOT - BOX OF MISCELLANEOUS 776 1 2 - PIPE WRENCHES TOOLS 777 1 2 - PIPE WRENCHES 744 1 LOT - BOX OF 778 1 2 - PIPE WRENCHES MISCELLANEOUS TOOLS 779 1 CHAIN BRAKE & PULLER 745 1 JET-WELD II - ELECTRIC 780 1 (3) - SAFETY EXTENSION GLUE GUN CORDS 746 1 JET-WELD II - ELECTRIC GLUE GUN 781 1 (2) SAFETY GOLF DROP

782 1 MILWAUKEE - 3/8" ELECTRIC 811 1 (4) SCREW GUNS DRILL 812 1 (4) SCREW GUNS 783 1 MILWAUKEE - 3/8" ELECTRIC 813 1 (4) SCREW GUNS DRILL 814 1 (4) SCREW GUNS 784 1 MILWAUKEE 6148 - 90 DEGREE 815 1 (4) AIR DRILLS ANGLE GRINDER 816 1 (4) AIR DRILLS 785 1 BOSCH - 90 DEGREE ANGLE 817 1 (4) AIR DRILLS GRINDER 818 1 (4) AIR DRILLS 786 1 SCINTILLA 835 - ELECTRIC 819 1 (4) AIR DRILLS HOLE PUNCHER 820 1 (4) AIR DRILLS 787 1 PORTER/CABLE - 3" BELT 821 1 (4) AIR DRILLS SANDER 822 1 (4) AIR DRILLS 788 1 BLACK/DECKER 3034 - 7 1/4" 823 1 (4) AIR DRILLS SAW 824 1 (4) AIR DRILLS 789 1 BLACK/DECKER 2680 - 7 1/4" 825 1 BIL-JAX - SCAFFOLDING - SAW 10 SECTIONS W/4-WHEELS 790 1 PORTER/CABLE - BATTERY 826 1 BIL-JAX - (3) 18" X 7' DRILL & CHARGER CROSS WALKS 791 1 PANASONIC - 15.6V BATTERY 827 1 FOLLOW TO MOTOR ROOM DRILL-SAW-CHARGER 828 1 LOT - CABINET W/ELECTRICAL 792 1 DEWALT - 12V BATTERY & MACHINE PARTS CHARGER & 12V BATTERY 829 1 LOT - SPOOLED WIRE & SHELF CHARGER 830 1 LOT - ELECTRICAL MOTOR IN 793 1 NAPA - 1/2" AIR IMPACT ROOM WRENCH 831 1 FOLLOW BACK OUT 794 1 (2) AIR CHISELS 832 1 LOT - 11 - USED ELECTRIC 795 1 (3) AIR CUT OFF & DIE MOTORS GRINDER 833 1 GREENLEE 885 - 1 1/4" TO 796 1 THOR - AIR HD GRINDER 5" PORTABLE HYDR. BENDER 797 1 (2) AIR DISC GRINDER 834 1 48" PIPE WRENCH & SLEDGE 798 1 LOT (4) - 90 DEGREE AIR HAMMER DRILLS 835 1 SQUARE D 505BH - 50 UVA - 799 1 LOT (4) - 90 DEGREE AIR TRANSFORMER DRILLS 836 1 GREENLEE - PORTABLE WIRE 800 1 LOT (4) - 90 DEGREE AIR PULLER DRILLS 837 50 FACTORY CARTS 801 1 LOT (4) - 90 DEGREE AIR 838 97 FACTORY CARTS DRILLS 839 100 FACTORY CARTS 802 1 LOT (4) - 90 DEGREE AIR 840 40 FACTORY CARTS DRILLS 841 50 FACTORY CARTS 803 1 LOT (4) - 90 DEGREE AIR 842 50 FACTORY CARTS DRILLS 843 50 FACTORY CARTS 804 1 LOT (4) - 90 DEGREE AIR 844 50 FACTORY CARTS DRILLS 845 80 FACTORY CARTS 805 1 LOT (4) - 90 DEGREE AIR 846 1 BULK BID - LOT 847-852 - DRILLS NEWMAN PLANER & LINE 806 1 LOT (4) - 90 DEGREE AIR 847 1 *NEWMAN 382 - 1B, 4B, 5B DRILLS 848 1 *BUSS AUTOMATION - INFEED 807 1 (4) SCREW GUNS 849 1 *BUSS AUTOMATION - CHAIN 808 1 (4) SCREW GUNS DECK 809 1 (4) SCREW GUNS 850 1 *BUSS AUTOMATION - ROOF 810 1 (4) SCREW GUNS TOP CHAIN

851 1 *BUSS AUTOMATION - CASE 879 1 SCRAP CONVEYOR - 78' X 12" ROLLER CONVEYOR BELT 852 1 *YELLOW STEEL PLATFORM & 880 1 DIEHL SL 52 - STRAIGHT STEPS LINE RIP 853 1 OLIVER 170 - STRAT-O-PLANE 881 1 DIEHL SL 52 - STRAIGHT 854 1 YALE - ELECTRIC LINE RIP WALK-BEHIND TOW MOTOR 882 1 DIEHL SL 52 - STRAIGHT 855 1 HESS & ACKERSON - SWING LINE RIP ARM SAW 883 1 DIEHL SL 52 - STRAIGHT 856 1 FOLLOW THE AUCTIONEER LINE RIP 857 1 BUSS AUTOMATION - CASS 884 1 DIEHL SL 52 - STRAIGHT ROLLERS LINE RIP 858 1 BULK BID - LOT 858-863 - 885 1 DIEHL - NEW CHAIN & RACE BUSS AUTOMATION CHAIN DECK 886 1 CROWN 35RRTT - STAND UP SYSTEM RIDE FORKLIFT 858A 1 *BUSS - BUSS AUTOMATION 887 1 OFFICE (2) DESKS - FILE COMBINATION CHAIN DECK & CABINET - 1 CHAIR - A/C SORTING CONVEYOR SYSTEM 888 1 OFFICE (2) DESKS - (2) 859 1 *MID OREGON - UP SAWS FILE CABINETS - SHELF A/C 860 1 *MID OREGON 16259-1 - UP 889 1 FOLLOW THE AUCTIONEER SAWS 890 1 MEE FOG - HUMIDIFICATION 861 1 *MID OREGON - UP SAWS SYSTEM 862 1 *MID OREGON - UP SAWS 891 1 WADKIN PBR-HD - BANDSAW 862A 1 *MID OREGON - UP CUT SAWS 892 1 36" BANDSAW PARTS 893 1 HERCULES - HYDR. DUMPER 863 1 *BUSS AUTOMATION - 5' 894 1 STEDMAN - HAMMER HOG WIDE BELT CONVEYOR 895 1 STEDMAN - REBUILT ROTOR 864 1 POWERMATIC CS-18RH - UP 896 1 FOLLOW AUCTIONEER TO CUT SAWS MAINTENANCE ROOM 865 1 BUSS AUTOMATION - 12" X 897 1 AUTOQUIP 48SM25EXW - 484" LOW SCRAP CONVEYOR SCISSOR LIFT 866 1 ECCA - 3500 LB. SCISSOR 898 1 (2) METAL CABINETS LIFT 899 1 WORKBENCH WITH VISE 867 1 MID OREGON - UP CUT SAW 900 1 LOT - BLUE BOXES WITH NUTS 868 1 MID OREGON - UP CUT SAW & BOLTS PARTS 901 1 LOT - REFRIGERATOR - 869 1 DIEHL 750 - STRAIGHT LINE MICROWAVE - A/C RIP 902 1 LOT - LARGE METAL CABINET 870 1 LINE 903 1 JUST-RITE - SAFETY 871 1 LINE GRE-CON CABINET 872 1 GRE-CON PARTS 904 1 WERNER - 6' STEP LADDER 873 1 SCRAP CONVEYOR 75' X 18" 905 1 WERNER - 6' STEP LADDER BELT 906 1 8' STEP LADDER 874 1 SCRAP CONVEYOR 30' X 12" 907 1 LOUISVILLE - 8' STEP BELT LADDER 875 1 SCRAP CONVEYOR 75' X 24" 908 1 WORK TABLE & LOT BELT 909 1 BALDOR 1216W - 3 HP BENCH 876 1 SCRAP CONVEYOR 80' X 24" GRINDER BELT 910 1 (2) METAL LOCKERS & (3) 877 1 BUSS AUTOMATION - FILE CABINETS DISTRIBUTION SYSTEM 911 1 (2) WORK BENCHES (1) 878 1 SCRAP CONVEYOR - 114' X 12" BELT W/VISE

912 1 RETRACTA - AIR HOSE 947 1 WEINIG H23/G10 - CNC - RETRACTOR AND CORD MOULDER 913 1 FEDDERS - A/C 948 1 FRIULMAC FN2L5500 - RETURN 914 1 NAPA - TOOL BOX WITH NUTS CONVEYOR AND BOLTS 949 1 MOULDER PARTS 915 1 TORCH GAUGES AND HOSE 950 1 WEINIG U22N - MOULDER 916 1 (2) PIPE VISE & TRIMMER 951 1 TAILBOY - RETURN CONVEYOR 917 1 B & K & UTILINE - DC 952 1 MOULDER PARTS VOLTAGE METER AND MOTOR 953 1 WEINIG U22A/7H - MOULDER 918 1 MAKITA - POWER SAW 954 1 SPEEDWAY - RETURN 919 1 TOW CHAIN CONVEYOR 920 1 TOW CHAIN 955 1 MOULDER PARTS 921 1 TOW CHAIN 956 1 WEINIG U22A-7H - MOULDER 922 1 TOW CHAIN 957 1 TAILBOY - RETURN CONVEYOR 923 1 WASH BUCKET 958 1 MOULDER PARTS 924 1 (2) JACK STANDS 959 2 9" HYDRO LOCK MOULDER 925 1 (2) HAND TRUCKS HEADS 926 1 FOLLOW THE AUCTIONEER 960 3 3" HYDRO LOCK MOULDER 927 1 (1) METAL CABINET & TOOLS HEADS 928 1 TORCH SET 961 4 6" HYDRO LOCK MOULDER 929 1 RIDGID 300 - PIPE THREADER HEADS SET 962 4 6" HYDRO LOCK MOULDER 930 1 FAN BELTS HEADS 931 1 PIPE FITTINGS 963 4 4" HYDRO LOCK MOULDER 932 1 (2) WHEEL BARROWS HEADS (0UTSIDE) 964 4 2 3/4" HYDRO LOCK MOULDER 933 1 (1) HYDR. HOST (OUTSIDE) HEADS 934 1 (1) DESK (3) CHAIRS (2) 965 4 MISCELLANEOUS HYDRO LOCK FILE CABINETS & CLOSET MOULDER HEADS 935 1 FOLLOW THE AUCTIONEER 966 2 MISCELLANEOUS HYDRO LOCK 936 1 HESS & ANDERSON - SWING MOULDER HEADS ARM SAW 967 4 3" HYDRO LOCK MOULDER 937 1 DIEHL 750 - STRAIGHT LINE HEADS RIP SAW 968 3 2" HYDRO LOCK MOULDER 938 1 TAYLOR 800171 - (40) HEADS SECTION CLAMP CARRIER 969 3 2 1/2" HYDRO LOCK MOULDER 939 1 TAYLOR 300187 & 300193 - HEADS OPTISIZER & GLUE SPREADER 970 4 2 1/2" HYDRO LOCK MOULDER 939A 35 PEDESTAL FANS HEADS 939B 14 INSPECTION LIGHTS 971 4 MISCELLANEOUS HYDRO LOCK 940 1 TAYLOR 800163 - (40) MOULDER HEADS SECTION CLAMP CARRIER 972 4 9" HYDRO LOCK MOULDER 941 1 TAYLOR - OPTISIER & GLUE HEADS SPREADER 973 5 6" HYDRO LOCK MOULDER 942 1 L & L DA-100-H - HYD. HEADS GLUER DU-ALL 974 4 MISCELLANEOUS HYDRO LOCK 943 1 PARTS FOR L & L MOULDER HEADS 944 1 WHITNEY - PLANER - 32" 975 5 2 1/2" HYDRO LOCK MOULDER SINGLE HEADS 945 1 GRINDER & PARTS 976 6 3 1/2" HYDRO LOCK MOULDER 946 1 WESTERN - FINGER JOINT HEADS SYSTEM 977 4 3 1/2" HYDRO LOCK MOULDER HEADS

978 4 4" HYDRO LOCK MOULDER 1004 2 7" MOULDER HEADS HEADS 1005 5 4" MOULDER HEADS 979 3 2 1/2" HYDRO LOCK MOULDER 1006 4 4" MOULDER HEADS HEADS 1007 4 6" MOULDER HEADS 980 4 2 1/2" HYDRO LOCK MOULDER 1008 4 2" MOULDER HEADS HEADS 1009 4 2" MOULDER HEADS 981 4 5 1/2" HYDRO LOCK MOULDER 1010 2 6" MOULDER HEADS HEADS 1011 2 4"MOULDER HEADS 982 5 MISCELLANEOUS HYDRO LOCK 1012 4 4" MOULDER HEADS MOULDER HEADS 1013 4 MISCELLANEOUS MOULDER 983 4 4" HYDRO LOCK MOULDER HEADS HEADS 1014 2 4" MOULDER HEADS 984 4 MISCELLANEOUS HYDRO LOCK 1015 3 MISCELLANEOUS MOULDER MOULDER HEADS HEADS 985 4 4" HYDRO LOCK MOULDER 1016 3 7" HYDRO LOCK MOULDER HEADS HEADS 986 4 3 3/4" HYDRO LOCK MOULDER 1017 3 9" HYDRO LOCK MOULDER HEADS HEADS 987 4 3 1/2" HYDRO LOCK MOULDER 1018 4 9" HYDRO LOCK MOULDER HEADS HEADS 988 4 4" HYDRO LOCK MOULDER 1019 3 9" HYDRO LOCK MOULDER HEADS HEADS 989 4 3 3/4" HYDRO LOCK MOULDER 1020 4 5" MOULDER HEADS HEADS 1021 3 MISCELLANEOUS MOULDER 990 4 5 1/2" HYDRO LOCK MOULDER HEADS HEADS 1022 4 6" MOULDER HEADS 991 4 6" HYDRO LOCK MOULDER 1023 2 7" MOULDER HEADS HEADS 1024 4 9" MOULDER HEADS 992 4 4" HYDRO LOCK MOULDER 1025 4 6" MOULDER HEADS HEADS 1026 2 5" MOULDER HEADS 993 4 4" HYDRO LOCK MOULDER 1027 2 4" MOULDER HEADS HEADS 1028 4 4 3/4" MOULDER HEADS 994 4 6" HYDRO LOCK MOULDER 1029 3 9" MOULDER HEADS HEADS 1030 2 9" MOULDER HEADS 995 4 4" HYDRO LOCK MOULDER 1031 2 4" MOULDER HEADS HEADS 1032 3 2 1/2" HYDRO LOCK MOULDER 996 4 4" HYDRO LOCK MOULDER HEADS HEADS 1033 3 2 1/2" (2) HYDRO LOCK 997 4 2 1/2" HYDRO LOCK MOULDER MOULDER HEADS (1) HEADS REG MOULDER HEADS 998 4 4" HYDRO LOCK MOULDER 1034 2 (1) - 5" PROFILE SHAPER HEADS HEADS (1) - 4" PROFILE 999 4 5 1/2" HYDRO LOCK MOULDER SHAPER HEADS HEADS 1035 4 2" MOULDER HEADS 1000 4 2 1/2" HYDRO LOCK MOULDER 1036 4 2" MOULDER HEADS HEADS 1037 4 2" MOULDER HEADS 1001 4 4" HYDRO LOCK MOULDER 1038 4 1 5/8" MOULDER HEADS HEADS 1039 2 1 1/4" MOULDER HEADS 1002 4 2 1/4" HYDRO LOCK MOULDER 1040 1 4" HYDRO LOCK MOULDER HEADS HEADS 1003 4 6" HYDRO LOCK MOULDER 1041 4 4" SHAPER HEADS HEADS 1042 4 4" SHAPER HEADS

1043 4 4" SHAPER HEADS 1076 1 LOT - 36 BOXES SKID OF 1044 4 3" SHAPER HEADS TOOLING 1045 1 2" SHAPER HEADS 1077 1 LOT - 33 BOXES SKID OF 1046 4 3" SHAPER HEADS TOOLING 1047 6 2" SHAPER HEADS 1078 1 LOT - 18 BOXES SKID OF 1048 5 (4) - 1 1/4" CUTTER HEADS TOOLING (1) - 2" CUTTER HEADS 1079 1 LOT - 17 BOXES SKID OF 1048A 1 BOX OF INSERT CUTTERS TOOLING 1049 4 1 1/2" CUTTER HEADS 1080 1 LOT - 16 BOXES SKID OF 1050 2 2" CUTTER HEADS TOOLING 1051 12 1/2" CUTTER HEADS 1081 1 LOT - 76 BOXES SKID OF 1052 5 1/2" CUTTER HEADS INSERTS FOR CUTTERS 1053 4 (3) 5/8" CUTTER HEADS 1082 1 LOT - 5 BOXES SKID OF (1) 1" CUTTER HEADS TOOLING 1054 3 1" CUTTER HEADS 1083 1 CEMCO 4RR-4252 LRR-4 - 1055 4 2 3/8" CUTTER HEADS TOP & BOTTOM SANDER 1056 3 MISCELLANEOUS CUTTER HEADS 1084 1 PARTS FOR CEMCO 1057 8 5/16" CUTTER HEADS 1085 1 SANDPAPER FOR CEMCO 1058 2 4 1/2" CUTTER HEADS 1086 1 GREENLEE 545 - DOUBLE END 1059 2 3 3/4" CUTTER HEADS TENONER 1060 2 (1) - 1/8" CUTTER HEAD (1) 1087 1 PARTS FOR GREENLEE 3" CUTTER HEAD 1088 1 CHALLONER C2456X-306-81 - 1061 8 (2) - 1 1/2" CUTTER HEAD DOUBLE END TENONER (6) MISCELLANEOUS 1089 1 PARTS FOR CHALLONER CUTTER HEADS 1090 1 GREENLEE 545 - DOUBLE END 1062 2 FS TOOL - 1 1/4"B - 1 TENONER 1/2" H CUTTER HEADS 1091 1 PARTS FOR GREENLEE 1063 2 FS TOOL - 1 1/4" B - 1 1092 1 GREENLEE 545 - DOUBLE END 1/2" H CUTTER HEADS TENONER 1064 2 FS TOOL - 1 1/4" B - 1 1093 1 PARTS FOR GREENLEE 1/2" H CUTTER HEADS 1094 1 INSERT CUTTER 1065 2 FS TOOL - 1 13/16" B - 1 1095 1 INSERT CUTTER 3/8" H CUTTER HEADS 1096 1 INSERT CUTTER 1066 2 FS TOOL - 1 13/16" B - 1 1097 1 INSERT CUTTER 3/8" H CUTTER HEADS 1098 1 INSERT CUTTER 1067 3 FS TOOL - 1 1/4" B - 1 1099 1 INSERT CUTTER 1/2" H CUTTER HEADS 1100 1 INSERT CUTTER 1068 2 FS TOOL - 1 1/4" B - 2" H 1101 1 INSERT CUTTER CUTTER HEADS 1102 1 INSERT CUTTER 1069 1 FS TOOL - 1 1/4" - 1 1/4" 1103 1 INSERT CUTTER H CUTTER HEAD 1104 1 INSERT CUTTER 1070 1 LOT - 13 BOXES SKID OF 1105 1 CABINET WITH CUTTERS TOOLING 1106 1 CABINET WITH CUTTERS 1071 1 LOT - 29 BOXES SKID OF 1107 1 LOT - 16 BOXES SKID OF TOOLING CUTTER HEADS 1072 1 LOT - 36 BOXES SKID OF 1108 1 LOT - 8 BOXES SKID OF TOOLING CUTTER HEADS 1073 1 LOT - 41 BOXES SKID OF 1109 1 LOT - 12 BOXES SKID OF TOOLING CUTTER HEADS 1074 1 LOT - 36 BOXES SKID OF 1110 1 LOT - 11 BOXES SKID OF TOOLING CUTTER HEADS 1075 1 LOT - 42 BOXES SKID OF TOOLING 1111 1 LOT - 16 BOXES SKID CUTTER HEADS

1112 1 LOT - CABINET OF CUTTER 1152 1 POWERMATIC 140 - BANDSAW HEADS 1153 1 WORKRITE 4000 - WOOD 1113 1 LOT - 21 - CUTTERS SKID OF WELDER CUTTER HEADS 1154 2 WORK TABLES W/WOOD VISES 1114 1 LOT - 7 BOXES SKID OF 1155 3 WORK TABLES W/WOOD VISES CUTTER HEADS 1156 1 OAKLEY H-6 - SANDER 1115 1 LOT - 15 BOXES SKID OF 1157 1 SAND PAPER FOR OAKLEY CUTTER HEADS 1158 1 CUSTOM - STROKE SANDER 1116 1 LOT - 8 BOXES SKID OF 1159 1 WHITNEY - SHAPER CUTTER HEADS 1160 1 PERTICI - 4-ROLL FEEDER 1117 1 DIEHL 750 - STRAIGHT LINE 1161 1 PARTS FOR SHAPER RIP SAW 1162 1 ZUCKERMAN 1-5-8-1500 - 1118 1 GRIZZLY - DRILL PRESS COPY LATHE FLOOR MODEL 1162A 1 TEMPLATE FOR 1162 1119 1 (6) (3) VACS (2) METAL 1163 1 G & P - DOUBLE FLAP CARTS (1) WORK BENCH SANDER 1120 1 NEWMAN HP 699 - PRESS 1164 1 EKSTROM CARLSON - DOUBLE 1121 1 BLACK BROTHERS - T & B SANDER GLUE SPREADER 1165 1 EKSTROM CARLSON - SCROLL 1122 1 TAYLOR - CLAMP CARRIER SANDER 1123 1 PARTS FOR CLAMP CARRIER 1166 1 CEMCO - BORER 1124 1 TAYLOR - CLAMP CARRIER 1167 1 TANNEWITZ U - TABLE SAW 1125 1 PARTS FOR CLAMP CARRIER 1168 1 SEMI T110 - SHAPER 1126 2 BLACK BROTHERS - 8" GLUE 1169 1 ZUCKERMAN 1-S-8-1500 - SPREADER COPY LATHE 1127 1 MATTISON 57-F - LATHE 1170 1 ZUCKERMAN 1-S-8-1000 - 1128 1 MATTISON 57-F - LATHE COPY LATHE 1129 1 PARTS FOR MATTISON LATHE 1171 1 TEMPLATES FOR ZUCKERMAN 1130 1 NASH 50-72 - SANDER 1172 1 PARTS FOR ZUCKERMAN 1131 1 PARTS FOR NASH SANDER 1173 1 PARTS FOR ZUCKERMAN 1132 1 GORBEL - 250 LB. CRANE 1174 1 PARTS FOR ZUCKERMAN 1133 848 LATHE STOCK ON SHELF 1175 1 PARTS FOR ZUCKERMAN 1134 990 LATHE STOCK ON SHELF 1176 1 PARTS FOR ZUCKERMAN 1135 1 MATTISON - SET UP STAND W/TABLES 1136 1 BALANCE STAND 1177 1 PARTS FOR CARVING MACHINE 1137 470 CART OF LATHE STOCK 1178 1 (3) FILE CABINETS (3) 1138 290 CART OF LATHE STOCK TABLES 1139 290 CART OF LATHE STOCK 1179 1 SCMI T110 - SHAPER 1140 500 CART OF LATHE STOCK 1180 1 EKSTROM CARLSON - SCROLL 1141 210 CART OF LATHE STOCK SANDER 1142 1 LOT - CART OF LATHE STOCK 1181 1 PROGRESS - POLISHER HOLDERS 1182 1 CEMCO - BORER 1143 1 LOT - CART OF LATHE STOCK 1183 1 ROUTER HOLDERS 1184 1 SCROLL SANDER 1144 20 FACTORY CARTS 1185 1 EKSTROM CARLSON - DOUBLE 1145 20 FACTORY CARTS SANDER 1146 20 FACTORY CARTS 1186 1 ALBRIGHT MASTER - GRIND & 1147 20 FACTORY CARTS POLISHER 1148 20 FACTORY CARTS 1187 1 NORTHFIELD 8" - JOINTER & 1149 20 FACTORY CARTS FEEDER 1150 40 FACTORY CARTS 1188 1 OAKLEY - SANDER 1151 29 WOOD BOX SKIDS 1189 1 PARTS FOR OAKLEY SANDER

1190 1 (2) BARREL STANDS (1) 1224 1 GM 1060 - STRAIGHT KNIFE CABINET (2) TABLES GRINDER 1191 1 L&L GLUEALL GLUER - 1225 1 WEINIG 931 - PROFILE 1192 1 PARTS FOR DUEALL GRINDER 1193 1 8" PARTS GLUER 1225A 1 PARTS FOR 1225 1194 1 QUINCY 325 - PISTON AIR 1226 1 WEINIG CMA - MEASURING COMPRESSOR UNIT 1195 1 AIR TAK D-600 - AIR DRYER 1227 1 BROTHER HS-300 - TRAVELING 1196 1 QUINCY Q-350 - SCREW WIRE EDM A/COMPRESSOR 1228 1 UTIMA SRLNCLC35 LCE/4 - 1197 1 AIR TAK D-400 - AIR DRYER TOOL & CUTTER GRINDER 1198 1 QUINCY QSI-500 AA1EB - 1229 1 HOFFMAN HDB - BALANCING SCREW A/COMPRESSOR 1230 1 DELTA 15-091 - FLOOR 1199 1 AIR TAK D-100A - AIR DRYER DRILL PRESS 1199A 1 PARTS FOR AIR COMPRESSOR 1231 1 LOT - (1) WOOD CABINET (BACK ROOM) W/CUTTER HEADS 1200 1 (2) 24" PEDESTAL FANS 1232 1 LOT - (2) BENCHES & 1201 1 LOUISVILLE - 8' STEP CONTENTS LADDER 1233 1 (2) WORK BENCHES & 1202 1 8' STEP LADDER CONTENTS 1203 1 WARNER - 8' STEP LADDER 1234 1 (1) WORK BENCH AND (2) 1204 1 BAUER - 8' STEP LADDER FILE CABINETS 1205 1 WARNER - 6' STEP LADDER 1235 1 OFFICE (1) DESK (4) 1206 1 (2) TABLES (1) SMALL FILE CABINETS CABINET 1236 1 CUSTOM - GRINDER 1207 1 (6) HAND PUMPS 1237 1 DEWALT - CUT OFF SAW 1208 1 BARREL CART AND HAND TRUCK 1238 1 CUSTOM - GRINDER 1209 1 VOYAGER - VACUUM CLEANER 1239 1 MATTISON - SET UP STAND 1210 1 LOT - (2) CARTS - OIL CANS 1240 1 WEINIG 930L - GRINDER & GREASE GUNS 1241 1 WEINIG CMA-970 - GRINDER 1211 1 LOT - (8) METAL CABINETS 1242 1 FOLEY - GRINDER (1) TABLE (1) DESK 1243 1 FULGER - GRINDER 1212 1 LOT - (2) TOOL BOXES - 1244 1 LOFERT - GRINDER CHAIN HOIST 1/2 TON 1245 1 DOALL DBW-15 - BUTT WELDER 1213 1 WESCO - PLATFORM LIFT 1246 1 SET UP STAND 1214 1 48" W X 10'L X 9'H PALLET 1247 1 ROCKFORD - SET UP STAND RACKING (6) CROSS BARS 1248 1 LOT - (1) WORK BENCH W/2 1215 1 LOT - (5) BARRELS OF VISES CLAMPS W/CARTS 1249 1 CUSTOM - SET UP STAND 1216 1 SWEED - SCRAP BANDING 1250 1 LOT (2) WORK BENCHES CUTTER 110V 1251 1 LOT - (3) METAL CABINETS 1217 1 5' SAFETY LADDER 1252 1 LOT - (5) RACKS OF SAW 1218 1 COTTERMAN - 5' SAFETY BLADES LADDER 1253 1 LOT - (1) CABINET AND 1219 1 TIMESAVER 452-2 HPAB - T&B CONTENTS SANDER 1254 1 LOT - (1) WOOD CABINET 1220 1 PARTS FOR TIMESAVER W/B 1255 1 LOT (1) RACK OF KNIVES 1221 1 LOT - SANDPAPER STOCK 1222 1 LOT - SHELVES & LATHE HEAD 1256 1 LOT (1) CABINET OF CUTTERS CABINET PARTS 1257 1 LOT - (2) BENCHES 1223 1 FOLLOW AUCTIONEER TO 1258 1 FOLLOW AUCTIONEER TO GRINDING ROOM SMALLS

1259 1 UNIVEL - DIAMOND GRINDING 1296 1 LOT - BOX OF STRAIGHT WHEEL INSERT BLADES 1260 1 NORTON - DIAMOND GRINDING 1297 1 LOT - BOX OF STRAIGHT WHEEL INSERT BLADES 1261 1 BAYSTATE - DIAMOND 1298 1 LOT - BOX OF STRAIGHT GRINDING WHEEL INSERT BLADES 1262 1 BAYSTATE - DIAMOND 1299 1 LOT - BOX OF STRAIGHT GRINDING WHEEL INSERT BLADES 1263 1 NORTON - DIAMOND GRINDING 1300 1 LOT - BOX OF STRAIGHT WHEEL INSERT BLADES 1264 1 NORTON - DIAMOND GRINDING 1301 1 LOT - BOX OF STRAIGHT WHEEL INSERT BLADES 1265 1 WEINIG - DIAMOND GRINDING 1302 1 LOT - BOX OF STRAIGHT WHEEL INSERT BLADES 1266 1 NORTON - DIAMOND GRINDING 1303 1 LOT - BOX OF STRAIGHT WHEEL INSERT BLADES 1267 1 (2) GRINDING WHEELS 1304 1 LOT - BOX OF STRAIGHT 1268 1 COLONIAL - GRINDING INSERT BLADES WHEELS 1305 1 (5) BOXES OF ALLEN 1269 1 GRINDING WHEELS WRENCHES 1270 1 NORTON - (3) GRINDING 1306 1 BOX OF INSERT BLADES WHEELS 1307 1 HARVARD - SCALE 1271 1 (1) - DIAMOND (1) REGULAR 1308 1 LOT - BOX OF TOOL BITS GRINDING WHEELS 1309 1 LOT - BOX OF TOOL BITS 1272 1 COLONIAL - GRINDING WHEEL 1310 1 LOT - BOX OF ROUTER 1273 1 WEINIG - GRINDING WHEEL CUTTERS 1274 1 NORTON - GRINDING WHEEL 1311 1 LOT - BOX OF ROUTER 1275 1 NORTON - GRINDING WHEEL CUTTERS 1276 1 NORTON - GRINDING WHEEL 1312 1 (1) MOULDER HEAD & (2) 1277 1 NORTON - GRINDING WHEEL CUTTERS 1278 1 NORTON - GRINDING WHEEL 1313 1 MITOYA - VENEERS 12" 1279 1 NORTON - GRINDING WHEEL 1314 1 MARUI - MICRO PRO TRACTOR 1280 1 SANAMOR - GRINDING WHEEL 1315 1 DIAL INDICATOR (1) & 6 1281 1 SANAMOR - GRINDING WHEEL 1/2" VENEER 1282 1 NORTON - GRINDING WHEEL 1316 1 FOLLOR - VENEERS 1283 1 COLONIAL - GRINDING WHEEL 1317 1 MITOYA - VENEERS 8" 1284 1 COLONIAL - GRINDING WHEEL 1318 1 HYDRA LOCK HEAD 1285 1 WINTER - GRINDING WHEEL 1319 1 MITOYA - 150 MM VENEERS 1286 1 GRINDING WHEEL 1320 1 STARRETT - DIGITAL 1287 1 NORTON - GRINDING WHEEL VENEERS 1288 1 TECHNIKS - LOT - (10) 1321 1 STARRETT - DIGITAL COLLECT CHUCK HOLDER VENEERS 1289 1 (12) TOOL HOLDERS 1322 1 BISCUIT CUTTER 1290 1 LOT - (2) SPINDLES & PARTS 1323 1 SCALE 1291 1 LOT - BOX OF 1/2" COLLETS 1324 1 LOT - STACK OF SAW BLADES 1292 1 LOT - (2) BOXES OF TOOL 1325 1 LOT - STACK OF SAW BLADES HOLDERS NUTS 1326 1 LOT - STACK OF SAW BLADES 1293 1 LOT - BOX OF STRAIGHT 1327 1 LOT - STACK OF SAW BLADES INSERT BLADES 1328 1 FOLLOW THE AUCTIONEER 1294 1 LOT - BOX OF STRAIGHT 1329 1 LOT - 26 PARTS RACKS INSERT BLADES 1330 1 LOT - 4-FILE CABINETS

1295 1 LOT - BOX OF STRAIGHT INSERT BLADES 2-ESKS 1-TABLE 1-A/C UNIT

1331 1 FOLLOW TO OFFICE BEHIND 1367 1 PLASTIC TUB WITH BROOMS MOULDERS 1368 1 CART OF AIR HOSES 1332 1 LOT - 3-DESKS, 1-FILE 1369 1 CART OF AIR HOSES CABINET, 4-CHAIRS, 1-BOOK 1370 1 SKID OF AIR HOSES CASE, 1-A/C UNIT 1371 1 CART OF AIR HOSES 1333 1 FOLLOW TO OFFICE'S AT 1372 1 CART OF AIR HOSES DOORWAY 1373 1 6 - HAMMERS 1334 1 LOT - 3-DESKS, 1-FILE 1374 1 6 - HAMMERS CABINETS, 2-SHLEVES, 1375 1 6 - HAMMERS 3-CHAIRS 1376 1 6 - HAMMERS 1335 1 LOT - 11 OFFICE EQUIP. 1377 1 3 - HAMMERS 1336 1 LOT - 3 WOOD PIECES 1378 1 6 - HAMMERS 1337 1 LOT - 4 FILE CABINETS 1379 1 3 - HAMMERS 1338 1 LOT - 2-SHELVES, S-CHAIRS, 1380 1 6 - HAMMERS 2-DESKS 1381 1 6 - HAMMERS 1339 1 LANCASTER 100F - CLAMP 1382 1 6 - HAMMERS 1340 1 LANCASTER 100F - CLAMPS 1383 1 6 - HAMMERS 1341 1 LANCASTER 100F-970 - 1384 1 6 - HAMMERS CLAMPS 1385 1 6 - HAMMERS 1342 1 WOODRITE - WOOD WELDER 1386 1 6 - HAMMERS 1343 1 DTI 5000 - SPACE BALL 1387 1 6 - HAMMERS 1344 1 TAYLOR - WHEEL CLAMP 1388 1 6 - HAMMERS 1345 1 TRANSITE - OVEN 1389 1 6 - HAMMERS 1346 1 LOT - 6 WORK BENCHES 1390 1 6 - HAMMERS 1347 1 LOT - METAL SHELVES & 2 1391 1 6 - HAMMERS FILE CABINETS 1392 1 6 - HAMMERS 1348 1 WYSONG MILES 315 - SANDER 1393 1 6 - HAMMERS 1349 1 NORTHFIELD - BANDSAW 27" 1394 1 6 - HAMMERS 1350 1 NICHOLS - CLEAT BOX 1395 1 6 - HAMMERS 1351 1 NICHOLS - CLEAT BOX 1396 1 6 - HAMMERS 1351A 1 CUSTOM - DOWEL TURNER - 1397 1 6 - HAMMERS BROOM HANDLE 1398 1 6 - HAMMERS 1352 1 WOODRITE - WOOD WELDER 1399 1 6 - HAMMERS 1353 1 WADKIN GP-32 - SAW 1400 1 6 - HAMMERS 1354 1 POWERMATIC - JOINTER 1401 1 6 - HAMMERS 1355 1 CUSTOM - PRESS 1402 1 6 - HAMMERS 1356 1 TAYLOR - CLAMP CARRIER - 1403 1 6 - HAMMERS 30 SECTION 1404 1 6 - HAMMERS 1357 1 LOT - 5 CART FULL - MISC. 1405 1 6 - HAMMERS STUFF 1406 1 6 - C CLAMPS 1358 1 LOT - 5 CART FULLS - MISC. 1407 1 6 - C CLAMPS STUFF 1408 1 6 - C CLAMPS 1359 1 LOT - 7 CART FULLS - MISC. 1409 1 6 - C CLAMPS STUFF 1410 1 6 - C CLAMPS 1360 1 LOT - 7 CART FULLS- MISC. 1411 1 6 - C CLAMPS STUFF 1412 1 6 - C CLAMPS 1361 1 STOCK ROOM - MISC. STUFF 1413 1 6 - C CLAMPS 1362 1 LOT - 66-PLASTIC TOTES 1414 1 6 - C CLAMPS 1363 16 FACTORY CARTS 1415 1 6 - C CLAMPS 1364 68 HANGING FANS 1416 1 6 - C CLAMPS 1365 20 START DAY 3 1417 1 6 - C CLAMPS 1366 1 PLASTIC TUB WITH BROOMS 1418 1 6 - C CLAMPS

1419 1 6 - C CLAMPS 1470 1 PAD SANDERS (2) - (2) 1420 1 6 - C CLAMPS SMALL 1421 1 6 - C CLAMPS 1471 1 PAD SANDERS (2) - (2) 1422 1 6 - C CLAMPS SMALL 1423 1 6 - C CLAMPS 1472 1 PAD SANDERS (2) - (2) 1424 1 6 - C CLAMPS SMALL 1425 1 6 - C CLAMPS 1473 1 PALM SANDERS (10) 1426 1 6 - C CLAMPS 1474 1 PALM SANDERS (10) 1427 1 6 - C CLAMPS 1475 1 PALM SANDERS (10) 1428 1 6 - C CLAMPS 1476 1 PALM SANDERS (10) 1429 1 6 - C CLAMPS 1477 1 PALM SANDERS (10) 1430 1 6 - C CLAMPS 1478 1 PALM SANDERS (10) 1431 1 4 - BAR CLAMPS 1479 1 PALM SANDERS (10) 1432 1 6 - BAR CLAMPS 1480 1 PALM SANDERS (10) 1433 1 6 - BAR CLAMPS 1481 1 PALM SANDERS (10) 1434 1 6 - BAR CLAMPS 1482 1 PALM SANDERS (10) 1435 1 6 - BAR CLAMPS 1483 1 FLAP SANDER 1436 1 6 - BAR CLAMPS 1484 1 AIR NAILERS (2) 1437 1 6 - BAR CLAMPS 1485 1 AIR WIRE NAILERS (2) 1438 1 6 - HAND SAWS 1486 1 AIR STAPLE GUNS (2) 1439 1 6 - HAND SAWS 1487 1 AIR NAILERS (2) 1440 1 5 - COPY SAWS 1488 1 AIR DRIVERS (2) 1441 1 6 - HAND SAWS 1489 1 SQUARES (11) 1442 1 4 - HAND SAWS 1490 1 SQUARES (9) 1443 1 6 - HAND SAWS 1491 1 SQUARES (4) 1444 1 6 - HAND SAWS 1492 1 SQUARES (6) 1445 1 4 - HAND SAWS 1493 1 SQUARES (4) 1446 1 6 - HAND SAWS 1494 1 SQUARES (6) 1447 1 6 - HAND SAWS 1495 1 SQUARES (3) 1448 1 6 - HAND SAWS 1496 1 SQUARES (2) 1449 1 BOX OF BRUSHES 1497 1 SQUARES (6) 1450 1 BOX OF SCRAPERS 1498 1 SQUARES (8) 1451 1 BOX OF FILES 1499 1 SQUARES (6) 1452 1 BOX OF PLIERS 1500 1 SQUARES (6) 1453 1 BOX OF PLIERS 1501 1 SQUARES (6) 1454 1 BOX OF PLIERS 1502 1 SQUARES (6) 1455 1 BOX OF CHISELS 1503 1 HIGH PRESSURE GREASE GUN 1456 1 BOX OF SCISSORS 1504 1 HIGH PRESSURE GREASE GUN 1457 1 LONG HANDLE BLOW GUNS (7) 1505 1 HIGH PRESSURE GREASE GUN 1458 1 LONG HANDLE BLOW GUNS (6) 1506 1 HIGH PRESSURE GREASE GUN 1459 1 LONG HANDLE BLOW GUNS (6) 1507 1 HIGH PRESSURE GREASE GUN 1460 1 LONG HANDLE BLOW GUNS (7) 1508 1 HIGH PRESSURE GREASE GUN 1461 1 PAD SANDER (2) 1509 1 HIGH PRESSURE GREASE GUN 1462 1 PAD SANDER (2) 1510 1 HIGH PRESSURE GREASE GUN 1463 1 PAD SANDER (2) 1511 1 GREASE GUN 1464 1 PAD SANDER (2) 1512 1 GREASE GUNS (3) 1465 1 PAD SANDER (2) 1513 1 GREASE GUNS (3) 1466 1 PAD SANDER (2) 1514 1 HEATERS (2) 1467 1 BOX OF SANDER PARTS 1515 1 HEATERS (2) 1468 1 PAD SANDERS (2) - (2) 1516 1 HEATERS (2) SMALL 1517 1 HEATERS (2) 1469 1 PAD SANDERS (2) - (2) SMALL 1518 1 PRY BARS (5)

1519 1 CROW BARS (4) 1558 1 AIR DRIVERS (4) 1520 1 HACK SAWS 1559 1 AIR DRIVERS (4) 1521 1 BOX OF SCRAPERS 1560 1 AIR DRIVERS (4) 1522 1 BOX OF SCRAPERS 1561 1 AIR DRIVERS (4) 1523 1 DUO-FAST HAMMERS (2) 1562 1 AIR DRIVERS (4) 1524 1 BOX OF FILES 1563 1 AIR DRIVERS (4) 1525 1 BOX OF BRASS SCRAPERS 1564 1 AIR DRIVERS (4) 1526 1 BOX OF SCREW DRIVERS 1565 1 AIR DRIVERS (4) 1527 1 BOX OF SCREW DRIVERS 1566 1 AIR DRIVERS (4) 1528 1 LEVELS (2) 1567 1 AIR DRILLS (4) 1529 1 CAN OF SQUARES 1568 1 AIR DRILLS (4) 1530 1 BOX OF ALLEN WRENCHES 1569 1 AIR DRILLS (4) 1531 1 BOX OF ALLEN WRENCHES 1570 1 AIR DRILLS (4) 1532 1 BOX OF WRENCHES 1571 1 AIR DRILLS (4) 1533 1 BOX OF WRENCHES 1572 1 AIR DRILLS (4) 1534 1 WALTON - TAP REMOVERS 1573 1 AIR DRILLS (4) 1535 1 MITUTOYO - CALIPER 1574 1 AIR DRIVERS (4) 1536 1 FOWLER - CALIPER 1575 1 AIR DRIVERS (4) 1537 1 STARRETT - CALIPER 1576 1 AIR DRILLS (4) 1538 1 STARRETT - CALIPER 1577 1 AIR DRILLS (4) 1539 1 ADJ. WRENCHES (4) 1578 1 AIR DRYERS (4) 1540 1 ADJ. WRENCHES (4) 1579 1 AIR DRYERS (4) 1541 1 WATERLOO - TOOL BOX 1580 1 AIR DRYERS (4) W/TOOLS 1581 1 AIR DRYERS (4) 1542 1 KENNEDY - TOOL BOX 1582 1 AIR DRYERS (4) 1543 1 ELECTRIC 3" BELT SANDER 1583 1 AIR DRYERS (4) 1544 1 ROCKWELL - ELECTRIC 3" 1584 1 AIR DRYERS (4) BELT SANDER 1585 1 AIR DRYERS (4) 1545 1 ROCKWELL - ELECTRIC 3" 1586 1 AIR DRILLS (4) BELT SANDER 1587 1 AIR DRILLS (4) 1546 1 PORTER CABLE - ELECTRIC 1588 1 AIR DRILLS (4) 3" BELT SANDER 1589 1 AIR DRILLS (4) 1547 1 ROCKWELL - ELECTRIC 3" 1590 1 AIR DRILLS (4) BELT SANDER 1591 1 AIR DRILLS (4) 1548 1 ROCKWELL - ELECTRIC 3" 1592 1 AIR DRILLS (4) BELT SANDER 1593 1 AIR DRIVERS (4) 1549 1 PORTER CABLE - ELECTRIC 1594 1 AIR DRIVERS (4) 3" BELT SANDER 1595 1 AIR DRIVERS (4) 1550 1 ROCKWELL - ELECTRIC 3" 1596 1 AIR DRIVERS (4) BELT SANDER 1597 1 AIR DRIVERS (4) 1551 1 ROCKWELL - ELECTRIC 3" 1598 1 AIR DRIVERS (4) BELT SANDER 1599 1 MISC AIR TOOLS (4) 1552 1 PORTER CABLE - ELECTRIC 1600 1 MISC AIR TOOLS (4) 3" BELT SANDER 1601 1 AIR DRIVERS (4) 1553 1 PORTER CABLE - ELECTRIC 1602 1 AIR TOOLS (4) 3" BELT SANDER 1603 1 INGERSOLL-RAND - AIR 1554 1 PORTER CABLE - ELECTRIC RATCHET 90 DEGREES 1/2" 3" BELT SANDER 1604 1 MISC. AIR TOOLS (3) 1555 1 PORTER CABLE - ELECTRIC 1605 1 MISC. AIR TOOLS (3) 3" BELT SANDER 1606 1 AIR PUMP SANDERS (2) 1556 1 ELECTRIC 3" BELT SANDER HD 1607 1 AIR PUMP SANDERS (2) 1557 1 AIR DRIVERS (4) 1608 1 AIR PUMP SANDERS (2)

1609 1 AIR PUMP SANDERS (2) 1647 1 BAR CLAMPS (7) 1610 1 AIR PUMP SANDERS (2) 1648 1 WARNER - STEP LADDER 8' 1611 1 AIR PUMP SANDERS (1) 1649 1 BAUER - STEP LADDER 8' 1612 1 METABO - ELECTRIC ROUTER 1650 1 WARNER - STEP LADDER 8' 1/4" 1651 1 BAUER - STEP LADDER 8' 1613 1 METABO - ELECTRIC ROUTER 1652 1 WARNER - STEP LADDER 8' 1/4" 1653 1 WARNER - STEP LADDER 8' 1614 1 BLACK & DECKER - ELECTRIC 1654 1 WARNER - STEP LADDER 8' DRILL 1/4" 1655 1 BAUER - STEP LADDER 8' 1615 1 BLACK & DECKER - DRIVER 1656 1 LOUISVILLE - STEP LADDER 1616 1 BLACK & DECKER - ROUTER 1 8' 1/2HP 1657 1 WARNER - STEP LADDER 6' 1617 1 STANLEY - ROUTER 1/4" 1658 1 WARNER - STEP LADDER 6' 1618 1 SCINTILLA - FOAM CUTTER 1659 1 WARNER - STEP LADDER 6' 1619 1 SKILL - PLANER 1660 1 WARNER - STEP LADDER 6' 1620 1 AIR SANDERS (5) 1661 1 WARNER - STEP LADDER 6' 1621 1 BANDING TOOLS (BOX OF) 1662 1 WARNER - STEP LADDER 6' 1622 1 PLANES (13) BOX OF 1663 1 WARNER - STEP LADDER 6' 1623 1 CLAMPS & PARTS (BOX OF) 1664 1 WARNER - STEP LADDER 6' 1624 1 CAN OF BITS 1665 1 WARNER - STEP LADDER 6' 1625 1 KENNEDY - TOOL BOX TOP & 1666 1 WARNER - STEP LADDER 6' BOTTOM 1667 1 WARNER - STEP LADDER 6' 1626 1 AERO - TOOL BOX BOTTOM 1668 1 BARNER - STEP LADDER 6' 1627 1 CRAFTSMAN - TOOL BOX TOP 1669 1 WOOD STEP LADDER 6' & BOTTOM 1670 1 WARNER - STEP LADDER 4' 1628 1 BLUE TOOL BOX 1671 1 WARNER - STEP LADDER 4' 1629 1 CRAFTSMAN - TOOL CART 1672 1 WARNER - STEP LADDER 4' 1630 1 INDESTRO - TOOL BOX 1673 1 WARNER - ALUM. STEP W/TOOLS TOP & BOTTOM LADDER 4' 1631 1 DAYTON - TOOL BOX W/TOOLS 1674 1 WARNER - WOOD STEP LADDER TOP & BOTTOM 3' 1632 1 CRAFTSMAN - TOOL BOX 1675 1 WARNER - ALUM. STEP W/TOOLS TOP & BOTTOM LADDER 3' 1633 1 INTERNATIONAL - TOOL BOX 1676 1 CART OF SCREWS W/TOOLS TOP & BOTTOM 1677 1 CART OF DOWELS 1634 1 AERO - TOOL BOX W/TOOLS 1678 1 CART OF DOWELS TOP & BOTTOM 1679 1 CART OF SANDPAPER 1635 1 GRAY CART 8-GREASE GUNS 1680 1 CART OF TAPE 1636 1 MARQUETTE - AC/DC WELDER 1681 1 CART OF MISC ON CART 1682 1 CART OF PARTS 1637 1 UNITED - SCALE 1683 1 CART OF TAPE 1638 1 SCOTCH-BRITE - BOXES (12) 1684 1 CART OF MISC PARTS 1639 1 IDENTICARD - PICTURE & 1685 1 CART OF TAPE PRINTER ID CARDS 1686 1 CART OF NEW ELEC. PARTS 1640 1 BRANDING IRON (3) - 1687 1 CART OF SANDPAPER TROUBLE LIGHT, GLUE GUN 1688 1 CART OF SCREWS 1641 1 BOX OF STAMPS (4) 1689 1 MONROE - PAPER SHREDDER 1642 1 BOX OF STAMPS (3) 1690 1 OFFICE CHAIR 1643 1 BAR CLAMPS (5) 1691 1 OFFICE CHAIR 1644 1 BAR CLAMPS (6) 1692 1 OFFICE CHAIR 1645 1 BAR CLAMPS (5) 1693 1 OFFICE CHAIR 1646 1 BAR CLAMPS (6) 1694 1 OFFICE CHAIR

1695 1 OFFICE CHAIR 1727 1 MORBIDELLI U550 - CNC 1696 1 OFFICE CHAIR 1728 1 PARTS FOR LOT 1727 1697 1 METAL SHELVES (2) AND (1) 1729 1 CUTTERS FOR LOT 1727 CABINET 1730 1 CABINET - WORK BENCH - 1698 1 PALLET RACKING 42"W X 10'L DESK X 8' H (20) CROSS ARMS (5) 1731 1 BACCI ISD-E - DBL END SECTIONS TENONER 1699 1 PALLET RACKING 42"W X 10'L 1732 1 PARTS FOR LOT 1731 X 8' H (20) CROSS ARMS (5) 1733 1 CUSTOM - PNEUMATIC PRESS SECTIONS 1734 1 DODDS] SE-155 - DOVETAILER 1700 1 PALLET RACKING 42" 1735 1 PARTS FOR LOT 1734 W-10'L-10'H 18 CROSS ARMS 1736 1 DODDS SE-155 - DOVETAILER (4) SECTIONS 1737 1 TANNEWITZ - TABLE SAW 1700A 1 PALLET RACKING 48"W X 7 1738 1 PARTS FOR LOT 1737 1/2'L X 106"H (16) CROSS 1739 1 TANNEWITZ - TABLE SAW ARMS (4) SECTIONS 1740 1 PARTS FOR LOT 1739 1701 1 METAL BINS 1741 1 ONSRUD W-684 - PROFILE 1702 1 FOLLOW THE AUCTIONEER SHAPER 1703 1 GRACO 215-363 - PAINT PUMP 1742 1 PARTS FOR LOT 1741 ON WHEELS W/GUN 1743 1 CUTTERS FOR LOT 1741 1704 1 DUBOIS RRC-48" - 1744 1 OLIVER 288 - DBL SPINDLE 1705 1 BULK BID 1705-1712 - SHAPER 1706 1 *DUBOIS CD-48 - PANEL 1745 1 PARTS FOR LOT 1744 CLEANER 1746 1 CUTTERS FOR LOT 1744 1707 1 *DUBOIS SWT-48 - SCUFF 1747 1 WHITNEY 250 - DBL SPINDLE SANDER SHAPER 1708 1 *DUBOIS 1RD-48 - FLASH OFF 1748 1 PARTS FOR LOT 1747 OVEN 1749 1 CART OF CUTTER HEADS 1709 1 *DUBOIS - U TURN CONVEYOR 1750 1 SKID OF CUTTER HEADS 1710 1 *DUBOIS SBT - SCUFFING 1751 1 CART OF CUTTER HEADS STATION 1752 1 CART OF CUTTER HEADS 1711 1 *DUBOIS DD48 - COATER 1753 1 CART OF CUTTER HEADS 1712 1 *DUBOIS UV-484 - UV OVEN 1754 1 CART OF CUTTER HEADS 1712A 1 PARTS FOR DUBOIS 1755 1 CART OF CUTTER HEADS 1713 1 FOLLOW THE AUCTIONEER 1756 1 LOT OF WIRE AND (2) STANDS 1714 1 ARRESTALL - DUST 1757 1 36" BANDSAW COLLECTOR 3HP 1758 1 36" BANDSAW 1715 1 ARRESTALL - DUST 1759 1 36" BANDSAW COLLECTOR 3HP 1760 1 PARTS FOR LOT 1759 & METAL 1716 1 ARRESTALL - DUST STAND COLLECTOR 3HP 1761 1 TANNEWITZ - TABLE SAW 1717 1 FOLLOW THE AUCTIONEER 1762 1 PARTS FOR LOT 1761 1718 1 PAINT BOOTH 8'W X 8' L - 1763 1 MEDAL CABINETS (3) 7' H 1764 1 BELL 424A - DBL-END CUT 1719 1 GRACO 22523 - PAINT BOOTH OFF 1720 1 GRACO 22523 - PAINT PUMP 1765 1 BELL 424A - DBL-END CUT 1721 1 FOLLOW THE AUCTIONEER OFF 1722 1 LAMTECH V - WRAPPER 1766 1 PARTS FOR LOT 1764 & 1765 1723 1 FOLLOW THE AUCTIONEER 1767 1 DRILLS FOR LOT 1764 & 1765 1724 1 MORBIDELLI U550 - CNC 1768 1 CEMCO MHV-84 - HORZ. BORER 1725 1 PARTS FOR LOT 1724 1769 1 PARTS FOR LOT 1768 1726 1 CUTTERS FOR LOT 1724 1770 1 CABINETS (3) & (2) WORK TABLES

1771 1 TYLER - FRENCH DOVETAILER 1813 1 PARTS & SANDPAPER 1772 1 PARTS FOR LOT 1771 1814 1 CUSTOM - FLUTTER SANDER 1773 1 CEMCO MVB - MULTI SPINDLE 1815 1 TACOMA - 4" BELT SANDER BORER 1816 1 PARTS-SANDPAPER 1774 1 PARTS FOR LOT 1773 1817 1 METAL CABINETS (4) 1775 1 WYSON MILLES 284 - 1818 1 CRITZ 300 - PROFILE EDGE MORTISER SANDER 1776 1 PARTS FOR LOT 1775 1819 1 PARTS-SANDPAPER 1777 1 CUSTOM - POLE MOUNTED 1820 1 WYSON MILLES 604 - EDGE DRILL PRESS SANDER 1778 1 PARTS FOR LOT 1777 1821 1 PARTS FOR LOT 1820 1779 1 METAL CABINETS (3) 1822 1 SANDPAPER 1780 1 WB & WC - VERTICAL BORER 1823 1 PIERSON - TILTING SPINDLE 1781 1 PARTS FOR LOT 1780 SANDER 1782 1 L & L DA-80 - DOALL 1824 1 NINFA SL - TILTING SPINDLE GLUEING PRESS SANDER 1783 1 PARTS FOR LOT 1782 1825 1 PARTS FOR LOT 1823 & 1824 1784 1 BLACK-BROS - GLUE 1826 1 G & P - FLAPPER SANDER SPREADER 8" 1/15HP 110 V 1827 1 G & P - FLAPPER SANDER 1785 1 WORK TABLES (2)- (2) 1828 1 PARTS & SANDPAPER SHELVES 1829 1 A & B - SHAPER & BELT 1786 1 KOMO BR508 - CNC VACUUM SANDER PUMP S# 93434H 1830 1 PARTS FOR LOT 1829 & 1787 1 QUINEY - VACUUM PUMP CABINETS 1788 1 QUINEY - VACUUM PUMP 1831 1 CUTTERS FOR LOT 1829 1789 1 PARTS FOR LOT 1786 1832 1 PALLET RACKING 44"W X 8' X 1790 1 LARGE LOT OF ROUTER BITS 101"H, 24-CROSS ARMS 1791 1 CUSTOM - CHAIR BACK 1833 1 PALLET RECKING 48"W X SANDER 7'9"L X 107"H, 16 CROSS 1792 1 PARTS FOR LOT 1791 ARMS 1793 1 CRITZ 400 - PROFILE & 1834 1 PALLET RACKING 44"W X 8'L SANDER X 10'H, 6-CROSS ARMS 1794 1 PARTS FOR LOT 1793 1835 1 SHOP CARTS - TURN OVER 1795 1 BACCI MOD - MORTISER CART 1796 1 PARTS FOR LOT 1795 1836 1 PRESTO PSA-74 - MANUAL 1797 1 DRILLS FORK LIFT 1500 LB. 1798 1 ONSRUD 1124-5M - ROUTER 1837 1 MATTISON 303 - STROKE 1799 1 ONSRUD 1124-5M - ROUTER SANDER 1800 1 PARTS FOR ROUTERS 1838 1 PARTS & SANDPAPER FOR LOT 1837 1801 1 SCMI R-9 - ROUTER 1802 1 PARTS FOR LOT 1801 1839 1 WYSON MILLES - STROKE 1803 1 MAXYM - CNC DOVETAILER SANDER 1804 1 PARTS & TOOLING 1840 1 SANDPAPER FOR LOT 1839 1805 1 WADKIN UX - CNC ROUTER 1841 1 WYSON MILLES - STROKE 1806 1 PARTS FOR LOT 1805 SANDER 1807 1 TOOLING 1842 1 SANDPAPER FOR LOT 1841 1808 1 CUSTOM - SCROLL SANDER 1843 1 MAX VSI-18 - SPINDLE 1809 1 PARTS-SANDPAPER SANDER & STAND 1810 1 CEMCO - DRUM SANDER 1844 1 SANDPAPER FOR LOT 1843 1811 1 PARTS FOR SANDER LOT 1810 1845 1 TORIT - CLEAN AIR DUST 1812 1 CUSTOM - HORZ. BELT BOOTH SANDER 1846 1 TORIT - CLEAN AIR DUST BOOTH

1847 1 FILTERS FOR LOT 1846 & 1847 1879 1 LEWIS SHEPARD - PLATFORM LIFT - ORANGE 1848 1 SIMPLEX - TIME CLOCK & 1880 1 LEWIS SHEPARD - PLATFORM CARD RACK LIFT - ORANGE 1849 1 DOWN DRAFT TABLE 1881 1 LEWIS SHEPARD - PLATFORM 1850 1 DOWN DRAFT TABLE LIFT - YELLOW-ORANGE 1851 1 HEESEMAN LSM-4 - CROSS 1882 1 LEWIS SHEPARD - PLATFORM WIDE BELT SANDER LIFT - RED 1852 1 PARTS & RACK FOR LOT 1851 1883 1 LEWIS SHEPARD - PLATFORM 1853 1 AEM 75-25 - WIDE BELT LIFT - BLUE SANDER 1884 1 LEWIS SHEPARD - PLATFORM 1854 1 PARTS FOR LOT 1853 & RACK LIFT - ORANGE 1855 1 SANDPAPER 1885 1 LEWIS SHEPARD - PLATFORM 1856 1 OFFICE DESK, MISC. A/C, LIFT - ORANGE CABINET SHELF 1886 1 LEWIS SHEPARD - PLATFORM 1857 1 METAL CABINETS (4) & LIFT - ORANGE CONVEYOR 1887 1 LEWIS SHEPARD - PLATFORM 1858 1 OAKLEY 672 - EDGE SANDER LIFT 1859 1 OAKLEY H-5 - EDGE SANDER 1888 1 LEWIS SHEPARD - PLATFORM 1860 1 SANDPAPER FOR LOT 1858 & 1859 LIFT 1889 1 LIFTRITE - PALLET JACK 1861 1 VACUUM TABLE & BENCH 10,000 LB. 1862 1 ZINTEXX 5200 - BELT 1890 1 LIFTRITE - PALLET JACK CLEANER 5,500 LB. 1863 1 ABRASIVE FOR LOT 1862 1891 1 ROL-LIFT - PALLET JACK 1864 1 WORK TABLES (3)- (2)W/VISE 1892 1 LIFTRITE - PALLET JACK 1865 1 SCISSOR LIFT PLATFORM 1893 1 LIFTRITE - PALLET JACK 1866 1 MULTITION N18X36 - 1894 1 INTERTHOR 1000/2 - PLATFORM LIFT ELECTRIC PALLET JACK-NO 1867 1 LIFTRITE - PALLET JACK CHARGER 2200 LB. 1868 1 LEWIS SHEPARD - PLATFORM 1895 1 INTERTHOR - ELECTRIC LIFT - WHITE PALLET JACK-NO CHARGER 1869 1 LEWIS SHEPARD - PLATFORM 2200 LB. LIFT - ORANGE 1896 1 INTERTHOR - ELECTRIC 1870 1 LEWIS SHEPARD - PLATFORM PALLET JACK-NO CHARGER LIFT - RED 2200 LB. 1871 1 LEWIS SHEPARD - PLATFORM 1897 1 INTERTHOR - ELECTRIC LIFT - BLUE-ORANGE PALLET JACK W/CHARGER 2200 1872 1 LEWIS SHEPARD - PLATFORM LB. LIFT - BLUE-RED 1898 1 INTERTHOR - ELECTRIC 1873 1 LEWIS SHEPARD - PLATFORM PALLET JACK W/CHARGER 2200 LIFT - GREEN LB. 1874 1 LEWIS SHEPARD - PLATFORM 1899 1 INTERTHOR - ELECTRIC LIFT - YELLOW-BLUE PALLET JACK NO CHARGER 1875 1 LEWIS SHEPARD - PLATFORM 2200 LB. LIFT - GREEN 1900 1 INTERTHOR - ELECTRIC 1876 1 LEWIS SHEPARD - PLATFORM PALLET JACK W/CHARGER 2200 LIFT - ORANGE LB. 1877 1 LEWIS SHEPARD - PLATFORM 1901 1 INTERTHOR - ELECTRIC LIFT - YELLOW-BLUE PALLET JACK W/CHARGER 2200 1878 1 LEWIS SHEPARD - PLATFORM LB. LIFT - RED 1902 1 INTERTHOR - ELECTRIC PALLET JACK

1903 1 INTERTHOR - ELECTRIC 1921 1 INTERTHOR - ELECTRIC PALLET JACK W/CHARGER 2200 PALLET JACK W/CHARGER 2200 LB. LB. 1904 1 INTERTHOR - ELECTRIC 1922 1 INTERTHOR - ELECTRIC PALLET JACK NO-CHARGER PALLET JACK W/CHARGER 2200 2200 LB. LB. 1905 1 INTERTHOR - ELECTRIC 1923 1 INTERTHOR - ELECTRIC PALLET JACK NO-CHARGER PALLET JACK W/CHARGER 2200 2200 LB. LB. 1906 1 INTERTHOR - ELECTRIC 1924 1 PRESTO PSA62 - ELECTRIC PALLET JACK NO-CHARGER WALK ALONG FORKLIFT 1500 2200 LB. LB. 1907 1 INTERTHOR - ELECTRIC 1925 1 PROMOVER - PALLET JACK PALLET JACK NO-CHARGER 1926 1 PROMOVER - PALLET JACK 2200 LB. 1927 1 PROMOVER - PALLET JACK 1908 1 INTERTHOR - ELECTRIC 1928 1 PRIMEMOVER - PALLET JACK PALLET JACK NO-CHARGER 1929 1 PRIMEMOVER - PALLET JACK 2200 LB. 1930 1 PRIMEMOVER - PALLET JACK 1909 1 INTERTHOR - ELECTRIC 1931 1 PRIMEMOVER - PALLET JACK PALLET JACK W/CHARGER 2200 1932 1 PRIMEMOVER - PALLET JACK LB. 1933 1 PRIMEMOVER - PALLET JACK 1910 1 INTERTHOR - ELECTRIC 1934 1 PRIMEMOVER - PALLET JACK PALLET JACK NO CHARGER 1935 1 PRIMEMOVER - PALLET JACK 2200 LB. 1936 1 PRIMEMOVER - PALLET JACK 1911 1 INTERTHOR - ELECTRIC 1937 1 PRIMEMOVER - PALLET JACK PALLET JACK NO CHARGER 1938 1 PRIMEMOVER - PALLET JACK 2200 LB. 1939 1 PRIMEMOVER - PALLET JACK 1912 1 INTERTHOR - ELECTRIC 1940 1 PRIMEMOVER - PALLET JACK PALLET JACK NO CHARGER 1941 1 PRIMEMOVER - PALLET JACK 2200 LB. 1942 1 PRIMEMOVER - PALLET JACK 1913 1 INTERTHOR - ELECTRIC 1943 1 PRIMEMOVER - PALLET JACK PALLET JACK W/CHARGER 2200 1944 1 PRIMEMOVER - PALLET JACK LB. 1945 1 PRIMEMOVER - PALLET JACK 1914 1 INTERTHOR - ELECTRIC 1946 1 PRIMEMOVER - PALLET JACK PALLET JACK W/CHARGER 2200 1947 1 PRIMEMOVER - PALLET JACK LB. 1948 1 PRIMEMOVER - PALLET JACK 1915 1 INTERTHOR - ELECTRIC 1949 1 PRIMEMOVER - PALLET JACK PALLET JACK NO CHARGER 1950 1 PRIMEMOVER - PALLET JACK 2200 LB. 1951 1 FOLLOW UPSTAIRS 1916 1 INTERTHOR - ELECTRIC 1952 1 TORIT - CLEAN AIR DUST PALLET JACK W/CHARGER 2200 BOOTH LB. 1953 1 TORIT - CLEAN AIR DUST 1917 1 INTERTHOR - ELECTRIC BOOTH PALLET JACK W/CHARGER 2200 1954 1 LANCASTER - CLAMPS LB. 1955 1 JET JSG-6 - BELT/DISC 1918 1 INTERTHOR - ELECTRIC SANDER PALLET JACK NO CHARGER 1956 1 LANCASTER - CLAMP 2200 LB. 1957 1 LANCASTER 1405 - CLAMP 1919 1 INTERTHOR - ELECTRIC 1958 1 WORK BENCHES (3) & WOOD PALLET JACK NO CHARGER CABINETS (2) 2200 LB. 1959 1 DOWN DRAFT TABLE (2) &

1920 1 INTERTHOR - ELECTRIC PALLET JACK TABLE

1960 1 SAFETY STEP LADDER 30" 1995 1 LANCASTER 1200B - CLAMP 1961 1 METAL RACKS (3) DRYING 1996 1 LANCASTER 100F - CLAMP RACKS 1997 1 WORK BENCHES (2)- (1) 1962 1 METAL RACKS (11) TABLE 1963 1 METAL RACKS (2), (1) FILE 1997A 1 PALLET RACKING 48"W X 10'L CABINET, (1) WOOD CABINET X 8'H 1964 1 INGERSOLL-RAND - MITER 1998 1 WORK BENCHES (3) - (1) HAND SAW RACK 1965 1 WORK TABLES W/VISE (3) 1999 1 FACTORY CARTS W/HARDWARE 1966 1 METAL RACKS (9) 1966A 1 SIMPLEX - TIME CLOCK 2000 1 PRESTO L-36 - SCISSOR LIFT 1967 1 LANCASTER 1400 - CLAMP 2001 1 PRESTO L-36 - SCISSOR LIFT 1968 1 CUSTOM - LAG BOLT DRIVER 2002 1 LANCASTER 1900 - CLAMP 1969 1 CUSTOM - LAG BOLT DRIVER 2003 1 HYTROL - POWERED BELT 1970 1 WELDOTRON 3W - WOOD WELDER CONVEYOR 30"W X 14'L X 1971 1 POWERMATIC 60 - JOINTER 6" 16"H 1972 1 NAPA - TURN OVER CART 2004 1 HYTROL - POWERED BELT 1973 1 INSPECTION LIGHTS (9) CONVEYOR 30"W X 8'L X 16"H 1974 1 INSPECTION LIGHTS (3) 2005 1 AMERICAN - SCISSOR LIFT 1975 1 HYTROL - BELT CONVEYOR 2006 1 CUSTOM - RAMP 2'6"W X 10'L X 16"H, 1HP 2007 1 WORK TABLES (4) & METAL MOTOR STAND 1976 1 HYTROL - BELT CONVEYOR 2008 1 LANCASTER 1200 - CLAMP 29"W X 16'L X 18"H, 1HP 2009 1 AMERICAN - SCISSOR LIFT MOTOR 1800 LB. 1977 1 HYTROL - BELT CONVEYOR 2010 1 METAL TABLES (4) & RACK 30"W X 8'L X 16"H, 1HP 2011 1 TORIT - DUST BOOTH MOTOR 2012 1 RITTER R-300 - EASEL CLAMP 1978 1 DOWN DRAFT TABLE 30"W X 2013 1 AMERICAN T-36 - SCISSOR 6'L LIFT 1979 1 FLAT CARTS (20) 2014 1 HYTROL - POWERED BELT 1980 1 FLAT CARTS (20) CONVEYOR 48"W X 42'L X 1981 1 FLAT CARTS (15) 16"H 1982 1 FACTORY CARTS (20) 2015 1 HYTROL - POWERED BELT 1983 1 MISC. UNITS (7) CONVEYOR 48"W X 9'L X 1984 1 BOX OF AIR HOSES 16"H, 90 DEGREE CORNER 1985 1 GRACO 215363 - PAINT PUMP 2016 1 CABINETS (3) -BENCH (1) ON WHEELS 2017 1 AMERICAN - SCISSOR LIFT 1986 1 GRACO 215363 - PAINT PUMP 2018 1 HYTROL - POWERED BELT W/GUN ON WHEELS CONVEYOR 30"W X 10'L X 1987 1 GRACO 215363 - PAINT PUMP 16"H W/GUN ON WHEELS 2019 1 AMERICAN - SCISSOR LIFT 1988 1 GRACO - PAINT POT & GUN 2020 1 HYTROL - POWERED BELT OIL WHEELS CONVEYOR 30"W X 14'L X 1989 1 CRAFTSMAN - VACUUM 16"H CLEANERS 2021 1 AMERICAN - SCISSOR LIFT 1990 1 MISC. VACUUM CLEANERS (6) 2022 1 HYTROL - POWERED BELT 1991 1 AMERICAN - SCISSOR LIFT CONVEYOR 30"W X 10'L X 2000 LB. 16"H 1992 1 WORK BENCH (2)- (1)W/VISE 2023 1 ROLLER CONVEYOR 30"W X 7'L 1993 1 AMERICAN - SCISSOR LIFT X 18"H 1994 1 FLOOD LIGHTS (38) 2024 1 WORK BENCHES (4)- CABINET

2025 1 PRESTO - SCISSOR LIFT 2066 1 LANCASTER 201-25 - CLAMP 2026 1 PALLET RACKING 42"W X 10'L 2067 1 DODDS GP-26F - DOVETAIL X 8'H GLUER 2027 1 WOOD SKIDS (10) & PLASTIC 2068 1 LANCASTER 201 - CLAMP BINS 2069 1 WORK BENCHES (5) 2028 1 FACTORY CARTS (20) 2070 1 PALLET RACKING 42"W X 10'L 2029 1 FACTORY CARTS (20) X 8'H 2030 1 FACTORY CARTS (20) 2071 1 BIG LOT OF WOOD SKIDS 2031 1 FACTORY CARTS (20) 2072 1 LANCASTER 1200 - CLAMP 2032 1 FACTORY CARTS (20) 2073 1 AMERICAN T36-022 - SCISSOR 2033 1 FACTORY CARTS (20) LIFT 2034 1 FACTORY CARTS (25) 2074 1 AMERICAN T36-022 - SCISSOR 2035 1 METAL CARTS (6) LIFT 2036 1 FACTORY CARTS (20) 2075 1 AMERICAN T36-022 - SCISSOR 2037 1 FACTORY CARTS (20) LIFT 2038 1 FACTORY CARTS (20) 2076 1 WORK TABLES (6) METAL 2039 1 LANCASTER 100 - CLAMP CABINET (1) 2040 1 TABLES (2) - CABINETS (2) 2077 1 AIR CASTER CORP D-10360-5 2041 1 OAKLEY H-6 - EDGE SANDER 2042 1 LANCASTER - CLAMP 2077A 1 NEWMAN K-16 - TABLE SAW 2043 1 POWERED CONVEYOR 30"W X 2078 1 POWERMATIC 60 - JOINTER 8" 93'L X 16"H 2079 1 NEWMAN K-16 - TABLE SAW 2044 1 CHAIRS (4), FILE CABINET, 2080 1 NORTHFIELD 27 - BANDSAW TV 2081 1 TANNEWITZ U - TABLE SAW 2045 1 OFFICE DESKS, CABINETS, 2082 1 SAW BLADES & PARTS CHAIRS, (2)TV-VCR, (2)A/C, 2083 1 ONSRUD W-240 - OVERHEAD PRINTER-LASER JET 4050N ROUTER 2046 1 WOOD BENCHES (6) 2084 1 EKSTROM CARLSON 112 - EDGE 2047 1 AMERICAN - SCISSOR LIFT SANDER 2048 1 HYTROL - POWERED BELT 2085 1 CARTS OF CLAMPS (3) CONVEYOR 30"W X 10'L X 2086 1 EKSTROM CARLSON 434 - 16"H ROUTER 2049 1 AMERICAN - SCISSOR LIFT 2087 1 PARTS & TOOLING FOR LOT 2086 2050 1 LANCASTER - CLAMP 2051 1 HYTROL - POWERED BELT 2088 1 STATE B-4 - TILTING CONVEYOR 30"W X 8'L X 16"H SPINDLE SANDER 2052 1 PRESTO - SCISSOR LIFT 2089 1 SANDPAPER 2053 1 AMERICAN - SCISSOR LIFT 2090 1 DELTA - DRILL PRESS 2054 1 WORK TABLES (4) 2091 1 BAXTER WHITNEY - DRILL 2055 1 LANCASTER - CLAMP PRESS 2056 1 LANCASTER - CLAMP 2092 1 CABINET OF DRILL BITS 2057 1 LANCASTER - CLAMP 2093 1 WADKIN CP-32 - SLIDING 2058 1 FOLLOW THE AUCTIONEER TABLE TOP SAW 2059 1 GRACO 226-040 - PUMP 2094 1 SANDING MASTER 2900 - WIDE 2060 1 PEDESTAL FANS (28) BELT SANDER 2061 1 DODDS GP-26F - DOVETAIL 2095 1 SANDPAPER GLUER 2096 1 G & P EPN - DBL. FLAPPER 2062 1 LANCASTER 201-25 - CLAMP SANDER 2063 1 DODDS GP-26F - DOVETAIL 2097 1 EKSTROM CARLSON 123 - GLUER SCROLL SANDER 2064 1 LANCASTER 201-25 - CLAMP 2098 1 WHITNEY 91 - DBL. SPINDLE 2065 1 DODDS GP-26F - DOVETAIL GLUER SANDER

2099 1 PARTS & CUTTERS 2136 1 HYTROL - POWERED BELT 2100 1 MATCHMAKER 95-200 - SLOT CONVEYOR 30"W X 10'L X MORTISER W/ROUTER 110 V. 16"H 2101 1 MATCHMAKER 95-200 - SLOT 2137 1 AMERICAN T36-022 - SCISSOR MORTISER NO ROUTER 110 V. LIFT 2102 1 AMERICAN - PATTERN LATHE 2138 1 HYTROL - POWERED BELT 2103 1 TOOLING FOR LOT 2102 & CONVEYOR 30"W X 14'L X TABLE 16"H 2104 1 CENTAURO T4-1300 - COPY 2139 1 LEE XL-36-20 - SCISSOR LATHE LIFT 2105 1 WADKIN T630 - PLANER 2140 1 HYTROL - POWERED BELT 2106 1 DAYTON 32918 - DRILL PRESS CONVEYOR 30"W X 14'L X 2107 1 LANCASTER 1400 - CLAMP 16"H 2108 1 WOODRITE - WOOD WELDER ON 2141 1 LANCASTER 1100 - CASE STAND CLAMP 2109 1 TANNEWITZ GH-36 - BAND SAW 2142 1 LEE XL36-20 - SCISSOR LIFT 36" 2143 1 WORK TABLES (4) & CABINETS 2110 1 RITTER R-800 - HIRZ. BORER 2111 1 DELTA 40-440 - SCROLL SAW 2144 1 LANCASTER 1200B - CLAMP 2112 1 OMS TR030 - DBL. MITER SAW 2145 1 LANCASTER 1200B - CLAMP 2113 1 CABINETS (7) 2146 1 WORK TABLES (5) 2114 1 WORK TABLE (5) 2147 1 LANCASTER 1200B - CLAMP 2115 1 LEE XL-3620 - SCISSOR LIFT 2148 1 LANCASTER 1200B - CLAMP 2116 1 LEE X53610 - SCISSOR LIFT 2149 1 LANCASTER 200 - CLAMP 2117 1 LEE XL36-20 - SCISSOR LIFT 2150 1 OAKLEY H-6 - EDGE SANDER 2118 1 L3620 - SCISSOR LIFT 2151 1 LANCASTER 1200 - CLAMP 2119 1 PALLET RACKING 10' X 44" X 2152 1 WORK TABLES (6) 5'4", 8 CROSS BEAMS (1) 2153 1 AMERICAN T36-022 - SCISSOR SECTION LIFT 2120 1 CRAFTSMAN ROUTERS, WOOD 2154 1 HYTROL - POWERED BELT VISE, & PARTS (1) SKID CONVEYOR 30"W X 10'L X 2121 1 METAL & WOOD CARTS (13) 16"H 2122 1 LEIGH 1258R-24 - DOVETAIL 2155 1 AMERICAN T36-022 - SCISSOR JIG LIFT 2123 1 WOODRITE - WOOD WELDER 2156 1 HYTROL - POWERED BELT 2124 1 PALLET RACKING 42"W X 10'L CONVEYOR 30"W X 14'L X X 8'H, 4-CROSS ARMS 16"H 2125 1 AMERICAN T36-20 - SCISSOR 2157 1 LEE XL-36-20 - SCISSOR LIFT LIFT 2126 1 WORK TABLES (4) 2158 1 HYTROL - POWERED BELT 2127 1 PLYWOOD (4-SKIDS) 48" X CONVEYOR 30"W X 14'L X 48" X 1 1/2" 16"H 2128 1 LANCASTER - CLAMP 2159 1 LANCASTER 1100 - CASE 2129 1 WORK TABLES (9) & CABINETS CLAMP 2130 1 METAL SHELVES (3) 2160 1 LEE LX13520 - SCISSOR LIFT 2131 1 DRYING RACKS (4) & PALLET 2161 1 OFFICE (2) DESKS (3) SHELVES (1) CHAIRS (2) FILES (1) A/C 2132 1 LANCASTER 1400 - CLAMP 2162 1 TABLES (5) CABINETS (3) 2133 1 WORK TABLES (7) 2163 1 HYTROL - POWERED BELT 2134 1 SAFETY STEP LADDER (2) 30" CONVEYOR 30"W X 14'L X 16" 2135 1 AMERICAN T-022 - SCISSOR H

LIFT 2164 1 HYTROL - POWERED BELT CONVEYOR

2165 1 (2) TABLES (3) CABINETS 2197 1 JUPITER 9 - AUTONAILER 2166 1 AMERICAN T36-022 - SCISSOR 2198 1 CUSTOM N/A - HOT PRESS LIFT 2199 1 WORK TABLES & BENCHES (8) 2167 1 AMERICAN T36-022 - SCISSOR 2200 1 PALLET RACKING (3) LIFT SECTIONS (12) CROSS ARMS 2168 1 ROLLER CONVEYOR W/PLATFORM 2201 1 AIR TOOL REPAIR ROOM 34" W X 116" L X 16" H 2202 1 CRAFTSMEN - TOOL BOX - 2169 1 WORK TABLES & (3) VISES & BOTTOM PLATFORM 2203 1 UPRIGHT CABINET OF WOOD 2170 1 OFFICE - (2) DESKS/TABLE VISES & PARTS (3) CABINETS COAT HANGER 2204 1 PALLET RACKING (3) (8) CHAIRS SECTIONS (12) CROSS ARMS 2171 1 LEE XL36-20 - SCISSOR LIFT 2205 1 PALLET RACKING (3) 2172 1 HYTROL - POWERED BELT SECTIONS (10) CROSS ARMS CONVEYOR 30"W X 14'L X 2206 1 PALLET RACKING (6) 16" H SECTIONS (24) CROSS ARMS 2173 1 WORK BENCHES W/VISES (2) 2207 1 PALLET RACKING (4) 2174 1 LANCASTER 1100 - CASE SECTIONS (16) CROSS ARMS CLAMP 2208 1 PALLET RACKING (5) 2175 2 ROLLER CONVEYOR (1) 5' X SECTIONS (20) CROSS ARMS 30" X 16" (1) 3'X 3" X 2209 1 PALLET RACKING (3) 16" SECTIONS (12) CROSS ARMS 2176 1 SLATT WOOD CONVEYOR 30" 2210 1 PALLET RACKING (6) W X 90' L X 16" H SECTIONS (24) CROSS ARMS 2177 1 LEE N/A - SCISSOR LIFT 2211 1 PALLET RACKING (6) 2178 1 WORK TABLES (6) SECTIONS (24) CROSS ARMS 2179 1 LANCASTER 100 - CLAMP 2212 1 PALLET RACKING (6) 2180 1 WALL FANS (5) SECTIONS (24) CROSS ARMS 2181 1 AMERICAN T36-022 - SCISSOR 2213 1 PALLET RACKING (6) LIFT SECTIONS (24) CROSS ARMS 2182 1 LEE XL36-20 - SCISSOR LIFT 2214 1 PALLET RACKING (6) 2183 1 LEE XL36-20 - SCISSOR LIFT SECTIONS (24) CROSS ARMS 2184 1 TABLES (2) PLATFORM (1) 2215 1 PALLET RACKING (6) 2185 1 EKSTROM CARLSON 123 - SECTIONS (24) CROSS ARMS SCROLL SANDER 2216 1 PALLET RACKING (6) 2186 1 AMERICAN T36-022 - SCISSOR SECTIONS (24) CROSS ARMS LIFT 2217 1 PALLET RACKING (7) 2187 1 AMERICAN T36-022 - SCISSOR SECTIONS (28) CROSS ARMS LIFT 2218 1 OFFICE - (4) A/C (4) 2188 1 MAKITA 2400B - MITER SAW CHAIRS (1) DESK (5) 10" CABINETS (1) TABLE 2189 1 WORKRITE N/A - WOOD WELDER 2219 1 QUINCY Q350 - SCREW AIR 2190 1 WORK DESK SHELVES (8) COMPRESSOR 2191 1 WORK TABLES (2) 2220 1 AIR TEK D-400 - AIR DRYER 2192 1 POWERMATIC N/A - BANDSAW 2221 1 PALLET RACKING (4) 14" SECTIONS (16) CROSS ARMS 2193 1 CUSTOM N/A - HOT PRESS 2222 1 PALLET RACKING (4) 2194 1 CUSTOM N/A - HOT PRESS SECTIONS (16) CROSS ARMS 2195 1 BLACK BROS N/A - GLUE 2223 1 PALLET RACKING (4) SPREADER 8" SECTIONS (16) CROSS ARMS 2196 1 CUSTOM N/A - NOTCHING 2224 1 PALLET RACKING (4) MACHINE SECTIONS (16) CROSS ARMS

2225 1 PALLET RACKING (4) 2259B 1 WOOD SLAT CONVEYOR 44" X SECTIONS (16) CROSS ARMS 62' X 16"H BELT CONVEYOR 2226 1 DESK (1) CHAIRS (2) 6'L X 30" W SLAT WOOD SHELVES (2) CONVEYOR 44" W TOTAL OF 2227 1 PALLET RACKING (3) 494' BELT CONVEYOR 30"W X SECTIONS (12) CROSS ARMS 6' L 2228 1 PALLET RACKING (3) 2259C 1 ECOA N/A - SCISSOR LIFT SECTIONS (12) CROSS ARMS 8000 LB 2229 1 PALLET RACKING (3) 2260 1 ECOA N/A - SCISSOR LIFT SECTIONS (12) CROSS ARMS 2261 1 ECOA N/A - SCISSOR LIFT 2230 1 PALLET RACKING (2) 2262 1 SPRAY BOOTH 10' W X 80" D SECTIONS (8) CROSS ARMS X 83" H 2231 1 PALLET RACKING (3) 2263 1 PAINT FILTERS SECTIONS (12) CROSS ARMS 2264 1 PAINT BOOTH 116"W X 51" D 2232 1 CTD CDM60 - DBL MITER SAW X 7' H 2233 1 SAFETY STEP LADDERS (2) 2265 1 GRACO 220-523 - PAINT PUMP TABLES (2) 2266 1 GRACO 220-523 - PAINT PUMP 2234 1 CUSTOM N/A - STROKE SANDER 2267 1 GRACO 205-530 - PAINT PUMP 2235 1 AMERICAN N1070 - SCISSOR 2268 1 PAINT BOOTH WITH LIGHTS LIFT & RAMP 2269 1 ECOA N/A - SCISSOR LIFT 2236 1 FOLLOW THE AUCTIONEER 2270 1 GRACO 220-523 - PUMP 2237 1 CUSTOM N/A - PRESS 2271 1 GRACO 220-523 - PUMP 2238 1 PALLET RACKING (1) SECTION 2272 1 GRACO 220-523 - PUMP 2239 1 CUSTOM N/A - PRESS 2273 1 GRACO 205530 - PUMP 2240 1 CUSTOM N/A - NOTCHING 2274 1 PAINT BOOTH 68" D X 12' MACHINE L X 12'H 2241 1 PEARSON N/A - EDGE SANDER 2275 1 PAINT BOOTH 8' W X 15' L X 2242 1 LEE XL36-20 - SCISSOR LIFT 8' H 2243 1 CUSTOM N/A - LOG BOLT 2276 1 GRACO N/A - PUMP UNITS (3) MACHINE 2277 1 GRACO - PUMPS (3) 220O 2244 1 HEESEMAN DBU - STROKE 523, 226819K, 207352 SANDER 2278 1 ECOA - SCISSOR LIFT 2245 1 PARTS FOR HEESEMAN SANDER 2279 1 SAFETY CABINET 2246 1 PALLET RACKING (1) SECTION 2280 1 PROTECTO SEAL 5560S - 2247 1 WHEEL CARTS (4) 4' X 80"L SAFETY CABINET 2248 1 POWERMATIC 50 - JOINTER 6" 2281 1 PROTECTO SEAL 5560S - 2249 1 DELTA N/A - BELT SANDER 6" SAFETY CABINET 2250 1 AMERICAN T36-20 - SCISSOR 2282 1 PROTECTO SEAL 5560 - LIFT SAFETY CABINET 2251 1 AMERICAN T36-20 - SCISSOR 2283 1 N/A N/A - SAFETY CABINET LIFT 2284 1 SECURALL A245 - SAFETY 2252 1 AMERICAN T36-20 - SCISSOR CABINET LIFT 2285 1 N/A N/A - SAFETY CABINET 2253 1 POWERMATIC 81 - BANDSAW 2286 1 F & M - SAFETY CABINET 20" 2287 1 JUSTRITE - SAFETY CABINET 2254 1 WOODRITE N/A - WOOD WELDER 2288 1 JUSTRITE - SAFETY CABINET 2255 1 WOODRITE N/A - WOOD WELDER 2289 1 JUSTRITE - SAFETY CABINET 2256 1 WORK TABLES (15) 2290 1 JUSTRITE - SAFETY CABINET 2257 1 BLOCK 355 - CENTRIFUGE 2291 1 JUSTRITE - SAFETY CABINET 2258 1 TORIT - CLEAR AIR BOOTH 2292 1 F & M 1932 - SAFETY 2259 1 CART OF FILTERS CABINET 2259A 1 PALLET RACKING 2293 1 N/A N/A - SAFETY CABINET

2294 1 N/A N/A - DRYER 45' 2333 1 DEVILBISS - LOT - 2-QT. 2295 1 N/A N/A - PAINT BOOTH 6' PAINT GUNS X 10' X 9' 2334 1 DEVILBISS - LOT - 2-QT. 2296 1 N/A N/A - DRYER 45' PAINT GUNS 2297 1 N/A N/A - PAINT BOOTH 6' 2335 1 DEVILBISS - LOT - 2-QT. X 10' X 9' PAINT GUNS 2298 1 N/A N/A - DRYER 40' 2336 1 DEVILBISS - LOT - 2-QT. 2299 1 N/A N/A - DRYER 80' PAINT GUNS 2300 1 N/A N/A - SPRAY BOOTH 15' 2337 1 DEVILBISS - LOT - 2-QT. W X 8' L X 12'H PAINT GUNS 2301 1 GRACO - (3) - 2338 1 DEVILBISS - LOT - 2-QT. 220523-220523,207707 PAINT GUNS 2302 1 DEBURG FINISHING LINE 2339 1 DEVILBISS - LOT - 2-QT. 2303 1 GRACO 220-523 - PUMP PAINT GUNS 2304 1 GRACO 220-523 - PUMP 2340 1 DEVILBISS - LOT - 2-QT. 2305 1 GRACO 220-523 - PUMP PAINT GUNS 2306 1 GRACO 220-523 - PUMP 2341 1 DEVILBISS - LOT - 2-QT. 2307 1 GRACO 220-523 - PUMP PAINT GUNS 2308 1 GRACO 220-523 - PUMP 2342 1 DEVILBISS - LOT - 2-QT. 2309 1 GRACO 220-523 - PUMP PAINT GUNS 2310 1 GRACO 226-819K - DIAPHRAM 2343 1 DEVILBISS - LOT - 2-QT. PUMP PAINT GUNS 2311 1 GRACO 207707 - PUMP 2344 1 DEVILBISS - LOT - 2-QT. 2312 1 GRACO - REGULATORS (4) PAINT GUNS 2313 1 GRACO - REGULATORS (2) 2345 1 DEVILBISS - LOT - 2-QT. 2314 1 MISC. STEPS (30) PAINT GUNS 2315 1 SAFETY STEPS (7) 2346 1 DEVILBISS - LOT - 2-QT. 2316 1 FOLLOW THE AUCTIONEER PAINT GUNS 2317 1 TRASH CANS & MATS 2347 1 GRACO - LOT - 5 PAINT 2318 1 CHAIN LIFTERS (3) GUNS 2319 1 AERO - ELECTRIC CHAIN 2348 1 GRACO - LOT - 5 PAINT HOIST 1500 LB. GUNS 2320 1 DIAPHRAM PUMPS & PARTS 2349 1 LOT - 5 PAINT GUNS 2321 1 PAINT HOSES 2350 1 LOT - 6 PAINT GUNS 2322 1 DEVILBISS - PAINT MIXERS 2351 1 LOT - 4 PAINT GUNS 2352 1 LOT - 4 PAINT GUNS 2323 1 GRACO - REGULATORS (8) 2353 1 LOT - 4 PAINT GUNS 2324 1 MISC, PAINT GUN & PUMP 2354 1 LOT - 4 PAINT GUNS PARTS 2355 1 LOT - 4 PAINT GUNS 2325 1 GRACO - SPRAY GUNS PARTS 2356 1 LOT - 4 PAINT GUNS 2326 1 BARREL VENTS (4) 2357 1 LOT - 4 PAINT GUNS 2327 1 DEVILBISS - LOT - 3 PINT 2358 1 LOT - 4 PAINT GUNS PAINT GUNS 2359 1 LOT - 4 PAINT GUNS 2328 1 DEVILBISS - LOT - 2-QT. 2360 1 LOT - 4 SPRAY GUNS PAINT GUNS 2361 1 LOT - 4 SPRAY GUNS 2329 1 DEVILBISS - LOT - 2-QT. 2362 1 LOT - 4 SPRAY GUNS PAINT GUNS 2363 1 LOT - 42SPRAY GUNS 2330 1 DEVILBISS - LOT - 2-QT. 2364 1 LOT - 4 SPRAY GUNS PAINT GUNS 2365 1 LOT - 4 SPRAY GUNS 2331 1 DEVILBISS - LOT - 2-QT. 2366 1 LOT - 4 SPRAY GUNS PAINT GUNS 2367 1 LOT - 10 FILTERS 2332 1 DEVILBISS - LOT - 2-QT. PAINT GUNS 2368 1 SAFETY CANS (23)

2369 1 PAINT POT & OVEN 2421 1 PAINT POT 2370 1 GRACO 226941 - PUMP & GUN 2422 1 PAINT POT 2371 1 PAINT CAN LIDS (4) 2423 1 PAINT POT 2372 1 DEVILBISS - PAINT POT 2424 1 PAINT POT 2373 1 DEVILBISS - PAINT POT 2425 1 BUCKEYE - PAINT POT 2374 1 GRACO 23615 - PAINT POT 2426 1 BUCKEYE - PAINT POT 2375 1 PAINT POT 2427 1 PAINT POT 2376 1 DEVILBISS - PAINT POT 2428 1 DEVILBISS - PAINT POT 2377 1 PAINT POT 2429 1 LOT - OFFICE (2) DESKS, 2378 1 DEVILBISS - PAINT POT (1) TABLE, (2) CABINETS, 2379 1 KARGARD - PAINT POT (1) A/C, (2) CHAIRS 2380 1 PAINT POT 2430 1 BARREL TRUCK (1), HAND 2381 1 BUCKEYE - PAINT POT TRUCK (3) 2382 1 PAINT POT 2431 1 EAGLE - SAFETY CABINET 2383 1 LAGRUNGE - PAINT POT 2432 1 PAINT SHAKER 2384 1 MANCHESTER - PAINT POT 2433 1 SAFETY WASH CABINET 32"L X 2385 1 LAGRUNGE - PAINT POT 48"W X 18"H 2386 1 GRACO 236153 - PAINT POT 2434 1 LOT - 15 SAFETY MISC. CANS 2387 1 LAGRUNGE - PAINT POT 2435 1 LOT - 35 SAFETY MISC. CANS 2388 1 LAGRUNGE - PAINT POT 2436 1 WORK TABLES (2), CABINETS 2389 1 GRACO 236153 - PAINT POT 2390 1 QMS - PAINT POT 2437 1 LOT - 10-MISC. SET OF 2391 1 DEVILBISS - PAINT POT FILTERS 2392 1 GRACO 236153 - PAINT POT 2438 1 LOT - 17 MISC. SET OF 2393 1 GRACO 236153 - PAINT POT FILTERS 2394 1 DEVILBISS - PAINT POT 2439 1 SIMPLEX - TIME CLOCK 2395 1 DEVILBISS - PAINT POT 2440 1 LOT - OFFICE-(2)DESKS, 2396 1 DEVILBISS - PAINT POT (3)CHAIRS, A/C, (1)CABINET 2397 1 DEVILBISS - PAINT POT 2441 1 SIMPLEX - TIME CLOCK 2398 1 GRACO 12051.16 - PAINT POT 2442 1 FOLLOW THE AUCTIONEER 2399 1 PAINT POT 2443 1 LUBE CON - 2400 1 GRACO 236153 - PAINT POT 2444 1 FOLLOW THE AUCTIONEER 2401 1 DEVILBISS - PAINT POT 2445 1 BELT CONVEYOR 240' OF 36" 2402 1 DEVILBISS - PAINT POT CONVEYOR 2403 1 DEVILBISS - PAINT POT 2446 1 PLASTIC 4-WHEEL CONTAINER 2404 1 DEVILBISS - PAINT POT 2405 1 GRACO 13658.22 - PAINT POT 2447 1 LOT - (4) PALLET RACKING 2406 1 GRACO - PAINT POT 42"W X 8'L X 8'H (8)CROSS 2407 1 DEVILBISS - PAINT POT ARMS 2408 1 DEVILBISS - PAINT POT 2448 1 LOT - (2) PALLET RACKING 2409 1 DEVILBISS - PAINT POT 42"W X 10'L X 8'H (4)CROSS 2410 1 DEVILBISS - PAINT POT ARMS 2411 1 GRACO - PAINT POT 2449 1 LOT - (5) PALLET RACKING 2412 1 FM - PAINT POT 36"W X 10'L X 8'H 2413 1 FM - PAINT POT (10)CROSS ARMS 2414 1 GRACO - PAINT POT 2450 1 LOT - (2)PALLET RACKING 2415 1 DEVILBISS - PAINT POT 48"W X 10'L X 8'H (8)CROSS 2416 1 GRACO - PAINT POT ARMS 2417 1 GRACO - PAINT POT 2451 1 LOT - (2) PALLET RACKING 2418 1 GRACO - PAINT POT 44"W X 8'L X 10'H 2419 1 BUCKEYE - PAINT POT (10)CROSS ARMS 2420 1 GRACO - PAINT POT 2452 1 LOT - (2)PALLET RACKING

2453 1 LOT - (1)PALLET RACKING 2476 1 TABLES (9) & (1) RACK 48"W X 10'L X 9'H (4)CROSS 2477 1 MATTISON HOOK LINE - ARMS CARTS- (250) 4' X 8' 2454 1 AVI - HEATED WRAPPING 2478 1 PALLET RACKING (6)-48"W X MACHINE 6'L X 18'H (36)CROSS ARMS 2455 1 AVI - HEATED WRAPPING 2479 1 PALLET RACKING (4)48"W X MACHINE 8'L X 18'H (24)CROSS ARMS 2456 1 DEWALT GP - RADIAL ARM SAW 2480 1 LOT - PALLET RACKING 2457 1 FOLLOW THE AUCTIONEER (3)44"W X 10'L X 13'H 2458 1 LOT - (52)FIRE (12)CROSS ARMS EXTINGUISHERS 2481 1 LOT - PALLET RACKING 2459 1 LOT - (49)FIRE (3)48"W X 10'L X 16'H EXTINGUISHERS (12)CROSS ARMS 2460 1 LOT - (4)FIRE 2482 1 LOT - PALLET RACKING EXTINGUISHERS (3)48"W X 10'L X 18'H 2461 1 LOT - (2) POWERED ROLLER (18)CROSS ARMS CONVEYOR-39"W X 165'L, 2483 1 LOT - PALLET RACKING POWERED BELT CONVEYOR-24"W (2)48"W X 10'L X 9'H X 10'L (12)CROSS ARMS 2462 1 LOT - (4)PALLET RACKING 2484 1 LOT - PALLET RACKING 42"W X 8'L X 8'H (8)CROSS (3)48"W X 10'L X 9'H ARMS (18)CROSS ARMS 2463 1 LOT - (4)PALLET RACKING 2485 1 LOT - PALLET RACKING 48"W X 10'L X 10'H (3)44"W X 10'L X 10'H (8)CROSS ARMS (18)CROSS ARMS 2464 1 LOT - (2)PALLET RACKING 2486 1 LOT - PALLET RACKING 42"W X 12'L X 8'H (4)CROSS (3)44"W X 8'L X 8'7"H ARMS (12)CROSS ARMS 2465 1 LOT - (1)PALLET RACKING 2487 1 LOT - PALLET RACKING 42"W X 8'L X 8'H (2)CROSS WELDED (11)48"W X 10'L X ARMS 22'H (66)CROSS ARMS 2466 1 METAL CARTS (4) 2488 1 LOT - PALLET RACKING 2467 1 AMERICAN T36-022 - SCISSOR (10)48"W X 10'L X 22'H LIFT (60)CROSS ARMS 2468 1 FOLLOW THE AUCTIONEER 2489 1 LOT - PALLET RACKING 2469 1 LOT - (2)PALLET RACKING (15)48"W X 10'L X 22'H (1) 42"W X 12'L X 8'H (90)CROSS ARMS (5)CROSS ARMS, (1) 44"W X 2490 1 LOT - PALLET RACKING 12'L X 8'H (5)CROSS ARMS (7)48"W X 10'L X 22'H 2470 1 LOT - (1)PALLET RACKING (54)CROSS ARMS 42"W X 9'L X 9'H (4)CROSS 2491 1 LOT - PALLET RACKING ARMS (7)48"W X 10'L X 22'H 2471 1 LOT - (1)PALLET RACKING (50)CROSS ARMS 42"W X 9'L X 8'H (2)CROSS 2492 1 LOT - PALLET RACKING ARMS (8)44"W X 10'L X 16'H 2472 1 LOT - (2)PALLET RACKING (32)CROSS ARMS 10'X 42" X 8' (4)CROSS 2493 1 LOT - PALLET RACKING ARMS (2)44"W X 10'L X 13'H 2473 1 ROLLER CONVEYOR CART (1) & (8)CROSS ARMS (1) HAND TRUCK 2494 1 LOT - PALLET RACKING 2474 1 MONARCH - BAND SAW-20" (2)44"W X 9'L X 13'H 2475 1 CAPITAL CLIPPER - CARDBOARD CRIMPER (8)CROSS ARMS

2495 1 LOT - PALLET RACKING 2530 1 LOT - DOCK LIGHTS (3) (2)42"W X 10'L X 16'H 2531 1 SHIPPING DESK (8)CROSS ARMS 2532 1 FOLLOW TO PUMP ROOM 2496 1 MISC.(3) SKIDS OF MISC. 2533 1 GRACO 208356 - PAINT PUMP PALLET RACKING 2534 1 GRACO 208356 - PAINT PUMP 2497 1 LOT 2497 THRU 2499 SKIPPED 2535 1 GRACO 208356 - PAINT PUMP 2500 1 ALUM. DOCK PLATE 2536 1 GRACO - MIXING PUMP & 2501 1 DOCK LIGHTS (6) LIFT 2502 1 LOT - PALLET RACKING 2537 1 GRACO - MIXING PUMP & (2)44"W X 10'L X 8'6"H LIFT (4)CROSS ARMS 2538 1 BINKS - MIXING PUMP & 2503 1 LOT - PALLET RACKING (15) LIFT 48"W X 10'L X 22'H 2539 1 GRACO 208356 - MIXING PUMP (90)CROSS ARMS & LIFT 2504 1 HAND TRUCKS (19) 2540 1 GRACO 208-356 - PAINT PUMP 2505 1 PEDASTAL FANS (5) 2541 1 GRACO 208-356 - PAINT PUMP 2506 1 GENIE 8WC25F - AERIAL LIFT 2542 1 GRACO - MIXING MOTOR & 2507 1 CLARK TM15 - BATTERY LIFT FORKLIFT (3)WHEEL 2543 1 GRACO - MIXING MOTOR & 2508 1 CLARK OP15 - ORDER PICKER LIFT 2509 1 CLARK OP15 - ORDER PICKER 2544 1 GRACO - MIXING MOTOR & 2510 1 CLARK OP15 - ORDER PICKER LIFT 2511 1 CLARK NOC-15B - ORDER 2545 1 GRACO 220106 - PAINT PUMP PICKER 2546 1 GRACO - DIAPHRAM PUMP & 2512 1 FRIG (1), MIC (1), LOCKERS LIFT & MIXING MOTOR (1), WORK TABLE (1) 2547 1 CE H97D - DIAPHRAM PUMP & 2513 1 METAL SHIPPING DESKS (3) LIFT & MIXING MOTOR 2514 1 KELLEY - DOCK LIGHTS (6) 2548 1 CE H97D - DIAPHRAM PUMP & 2515 1 SIMPLEX - TIME CLOCK & LIFT & MIXING MOTOR CARD RACKS 2549 1 CE E97C - DIAPHRAM PUMP & 2516 1 OFFICE (2)A/C, (2)FILE, LIFT & MIXING MOTOR (1)BOOK, (1)CHAIR, 2550 1 CE H97D - DIAPHRAM PUMP & (1)COUCH LIFT & MIXING MOTOR 2517 1 OFFICE CHAIRS (9) & 2551 1 GRACO D61211 - DIAPHRAM (1)MATCHING TABLE PUMP & LIFT & MIXING MOTOR 2518 1 OFFICE (2)A/C, (1)STAND, 2552 1 GRACO H97D - DIAPHRAM PUMP (2)DESKS, (1)FILE, & LIFT & MIXING MOTOR PARTICIONS 2553 1 GRACO H00E - DIAPHRAM PUMP 2519 1 FOLLOW THE AUCTIONEER & LIFT & MIXING MOTOR 2520 1 TOLEDO - SCALE 2554 1 GRACO H97D - DIAPHRAM PUMP 2521 1 OHOUS - SCALE & LIFT & MIXING MOTOR 2522 1 TOOL BOX 2555 1 GRACO 208-356 - PAINT PUMP 2523 1 BANDING CART & TOOLS 2556 1 GRACO - MIXING MOTOR & 2524 1 LOT - STEP LADDERS (2) 6' LIFT 2525 1 BAUER - FIBERGLASS STEP 2557 1 GRACO 208-356 - PAINT PUMP LADDER 8' 2558 1 GRACO - MIXING MOTOR & 2526 1 WERNER - FIBERGLASS STEP LIFT LADDER 8' 2559 1 GRACO 208-356 - PAINT PUMP 2527 1 WERNER - FIBERGLASS STEP 2560 1 GRACO - MIXING MOTOR & LADDER 10' LIFT 2528 1 LOT - HAND TRUCKS (7) 2561 1 GRACO 208-356 - PAINT PUMP 2529 1 SECURA II - SAFETY CABINET 2562 1 GRACO - MIXING MOTOR & LIFT

2563 1 GRACO 208-356 - PAINT PUMP 2602 1 PAINT POT 2564 1 GRACO - MIXING MOTOR & 2603 1 PAINT POT LIFT 2604 1 PAINT POT 2565 1 CART OF GROUND WIRES 2605 1 PAINT POT 2566 1 LOT OF BARREL CARRIERS 2606 1 GRACO - PAINT GUN PARTS 2567 1 BARREL LIFTER & CHAIN 2607 1 GRACO - PARTS HOIST W/TRACK 2608 1 LOT - (2)AIR GAUGE SETS 2568 1 HAND PUMPS (5) 2609 1 LOT - (2) AIR MIXERS 2569 1 MIXING PUMPS W/LIDS (2) W/LIDS 2570 1 GRACO PUMPS (2) 2610 1 LOT - (2) PAINT GUNS 2571 1 BARREL HAND TRUCK (1) 2611 1 LOT - (2) PAINT GUNS 2572 1 GRACO - PUMP 2612 1 LOT - (2) PAINT GUNS 2573 1 MIXING PUMP & SAFETY 2613 1 LOT - (2) PAINT GUNS SWITCH 2614 1 LOT - (2) PAINT GUNS 2574 1 GRACO - PUMP 2615 1 LOT - (2) PAINT GUNS 2575 1 MIXING PUMP & SAFETY 2616 1 LOT - (2) PAINT GUNS SWITCH 2617 1 LOT - (2) PAINT GUNS 2576 1 GRACO 220106 - PUMP 2618 1 LOT - (2) PAINT GUNS 2577 1 MIXING PUMP & SAFETY 2619 1 LOT - (2) PAINT GUNS SWITCH 2620 1 LOT - (2) PAINT GUNS 2578 1 GRACO 220106 - PUMP 2621 1 LOT - (2) PAINT GUNS 2579 1 MIXING PUMP & SAFETY 2622 1 LOT - (2) PAINT GUNS SWITCH 2623 1 LOT - (2) PAINT GUNS 2580 1 METAL CABINET 2624 1 LOT - (2) PAINT GUNS 2581 1 FOLLOW TO PAINT POTS 2625 1 LOT - (2) PAINT GUNS 2582 1 PAINT POT 2626 1 LOT - (2) PAINT GUNS 2582A 1 QUINCY 1250 - AIR 2627 1 LOT - (2) PAINT GUNS COMPRESSOR 250 HP 2628 1 LOT - (2) PAINT GUNS 2582B 1 AIR TECH D-1400-A - AIR 2629 1 LOT - (2) PAINT GUNS DRYER 2630 1 LOT - (2) PAINT GUNS 2582C 1 BUFFALO - AIR TANK 2631 1 LOT - (2) PAINT GUNS 2582D 1 NOVA - ELECT. PEDESTAL 2632 1 LOT - (2) PAINT GUNS FAN 2633 1 LOT - (2) PAINT GUNS 2583 1 PAINT POT 2634 1 LOT - (2) PAINT GUNS 2584 1 DEVILBISS - PAINT POT 2635 1 GRACO - PAINT HOSES 2585 1 DEVILBISS - PAINT POT 2636 1 GRACO - PAINT HOSES 2586 1 PAINT POT 2637 1 GRACO - PAINT HOSES 2587 1 BUCKEYE - PAINT POT 2638 1 GRACO - REPAIR KIT 2588 1 BUCKEYE - PAINT POT 2639 1 GRACO - PARTS 2589 1 DEVILBISS - PAINT POT 2640 1 GRACO - PARTS 2590 1 PAINT POT 2641 1 GRACO - REGULATORS (2) 2591 1 DEVILBISS - PAINT POT 2641A 1 LEE - SCISSORS LIFT 1000 2592 1 CRN - PAINT POT LBS. 2593 1 DEVILBISS - PAINT POT 2642 1 GRACO - REGULATORS (2) 2594 1 DEVILBISS - PAINT POT 2643 1 GRACO - REGULATORS (2) 2595 1 PAINT POT 2644 1 GRACO - REGULATORS (2) 2596 1 DEVILBISS - PAINT POT 2645 1 GRACO - REGULATORS (2) 2597 1 PAINT POT 2646 1 GRACO - PARTS 2598 1 PAINT POT 2647 1 GRACO - RODS 2599 1 PAINT POT 2648 1 PARTS CABINET 2600 1 PAINT POT 2649 1 PARTS 2601 1 PAINT POT 2650 1 BALL VALVES

2651 1 GRACO - REGULATORS (2) 2666A 1 LOT - OFFICE FURNITURE: 2652 1 PAINT SHAKER DESK, CHAIR, TABLE, WOOD 2653 1 BALLYMORE - DBL. SAFETY CABINET STEPS 2666B 1 LOT - OFFICE FURNITURE: 2654 1 FANS (BOX OF) DESK, FILE, WOOD CABINET 2655 1 HYD. PUMP & TANK 2666C 1 LOT - OFFICE FURNITURE: 2656 1 PLASTIC TUBS (20) FILING CABINETS 2657 1 METAL CABINETS (7) 2668 1 LOT - OFFICE FURNITURE: 2658 1 PLASTIC TUB OF PARTS DESK, (3)FILING, (2)CHAIRS 2659 1 METAL BIN & TIN CANS 2669 1 OSWALD 195SPV - PRINTER 2659A 1 PALLET RACKING 10' X 42" X 2669A 1 LOT - (5)FILING CABINETS, 8" APPROX. DESK, (3)TABLE UNITS 2659B 1 ENPAC - (2) DRUM 2670 1 LOT - (10)FILING CABINETS HARDCOVER SPILL PALLET 2671 1 LOT - (10)FILING CABINETS, 2660 1 SIMPLEX - TIME CLOCK & (2)ADDING MACHINES CARD HOLDERS 2672 1 LOT - (5)CUBICLES, 2662 1 LOT - OFFICE FURNITURE (3)DESKS, TYPEWRITER, (2)DESKS, (2)SHELVES (1)ADDING MACHINE (1)CHAIR 2672A 1 LOT - (4)FILING, 2662A 1 LOT - OFFICE FURNITURE (2) (2)LIGHTS, (1)HEADBOARD CUBICLES (2)DESKS (1)CHAIR 2673 1 LOT - OFFICE FURNITURE: 2662B 1 LOT - OFFICE FURNITURE DESK, (3)SHELF UNITS, (5)CUBICLES (2)SHELVES, (2)FILE, (1)CHAIR MISC. CHAIRS, DRAWING 2674 1 LOT - OFFICE FURNITURE: TABLE DESK, (2)SHELF UNITS, 2663 1 LOT - CAFE FURNITURE (1)FILE, (1)CHAIR (15)TABLES, (54)CHAIRS 2675 1 LOT - (6) FILE CABINETS 2664 1 LOT - OFFICE EQUIPMENT 2676 1 LOT - (8)TABLES, (6)TABLES (2)GBC BINDING (14)CHAIRS, (2) 3M MACHINES PROJECTORS (1)WALL UNIT 2664A 1 LOT - SMALL OFFICE 2677 1 LOT - (6)CHAIRS, (1)TABLE, SUPPLIES: FILES, STAPLERS, (2)CABINETS CLIPBOARDS, PENCIL 2678 1 OLD STENCIL MACHINE (3RD SHARPENER, SMALL TOOLS FLOOR) 2664B 1 MULTI 2020 - PAPER CUTTER 2678A 1 RICOH WB-1 - WHITE BOARD 2664C 1 CUMMINS 10 - PAPER 2678B 1 LOT - OFFICE FURNITURE: SHREADER DESK, TABLE, WALL UNIT, 2665 1 OFFICE FURNITURE (2)CHAIRS, STAND 2665A 1 LOT - OFFICE FURNITURE: 2679 1 LOT - OFFICE FURNITURE: (2)CABINTES, DESK, DESK, (3)WALL UNITS, (3)CUBICLES (4)FILING (3)CHAIRS CABINETS 2680 1 CUBICLES (8), DESKS, 2665B 1 LOT - OFFICE FURNITURE: CHAIRS (1)DESK, (1)CHAIR, 2680A 1 LOT - (2)DRESSERS, (2)CABINETS (2)CABINETS, 2665C 1 LOT - OFFICE FURNITURE: (1)REFRIGERATOR CABINET 2681 1 LOT - OFFICE FURNITURE: 2665D 1 LOT - OFFICE FURNITURE: TABLE, (7)CHAIRS, DESK, MOBILE NURSE TRAILER & (2)WALL UNITS CONTENTS 2682 1 LOT - (2)TABLES, (1)STAND, 2666 1 LOT - OFFICE FURNITURE: (13)CHAIRS (1)DESK, (2 FILE) (2) CABINETS 2683 1 OFFICE FURNITURE:

2683B 1 CUBICLES (4), (4) DESKS, (5)CHAIRS 2683C 1 FILE CABINET (7), (2) WALL UNITS, (1)STAND 2684 1 FOLLOW THE AUCTIONEER 2685 1 OFFICE FURNITURE: (2)CABINETS, (1) WALL UNIT, DESK, (3)CUBICLES 2686 1 OFFICE FURNITURE: DESK, CHAIR, WALL UNIT 2687 1 OFFICE FURNITURE: DESK, (2) WALL UNITS, (2)CHAIRS, TABLE 2688 1 OFFICE FURNITURE: DESK, (2)CHAIRS, (2)WALL UNITS, (1)SHELF 2689 1 OFFICE FURNITURE: (2) CABINETS, (4) FILES 2689A 1 LOT - PICTURES (5) 2690 1 OFFICE FURNITURE: (2) WALL UNITS, DESK, CHAIR 2691 1 OFFICE FURNITURE: (5)FILE CABINETS 2692 1 OFFICE FURNITURE: (8)FILE CABINETS 2693 1 OFFICE FURNITURE: CHAIRS, PICTURES, TABLE, FILE CABINET 2694 1 OFFICE FURNITURE: GLASS TABLE, CHAIRS, DESK, CABINET, LIGHT 2695 1 OFFICE FURNITURE: (4)FILE CABINETS, (1)MIRROR, RUG 2696 1 OFFICE FURNITURE: (5)FILE CABINETS, SHARP MICROWAVE 2697 1 OFFICE FURNITURE: TABLE, (2)STANDS, CHAIR, DESK 2698 1 OFFICE FURNITURE: DESK, WALL UNIT, FILE, CHAIR, SHELF