DUAL POOL 626TECHNICAL SPECIFICATION SHEETDOC. # PE-S-052

Screen Deck Type

# of Screen PanelsDeck Angle AdjustmentAdjustable While Drilling (AWD)Tensioning System (Primary Deck)

Screen Support/Panel (Primary)

Tensioning System (Scalping Deck)

Screen Support/Panel (Scalping)Screen Change Time

Pyramid (PMD)Pyramid (PMD+)Flat Scalping Deck Panels

PMDPMD+

Urethane

Desilter

Desander

Weir Feeder VE - P/N 16801-01-001 Hood P/N 16871-01

DESILTER / DESANDER (OPTIONAL) DOC # PE-S-06020 Way Cyclone with 4" Cones and Ball Valves P/N 13245-01

2 - 10" Cones P/N 12945-01-0073 - 10" Cones P/N 12945-02-007

16 Way Cyclone with 4" Cones and Ball Valves P/N 13245-0214 Way Cyclone with 4" Cones and Ball Valves P/N 13245-03

Primary Deck

Exhaust Fan and Lines NOT Included

4 Compression Pins per Panel providing approximately 2000 lbs force to hold each screen in place4 Elastomeric Screen Cushions2 Elastomeric Cross Supports2 Elastomeric Side Supports

G.A.: 16758-00 SERIES W.S.: 16876-00 SERIES

Double Deck Dual Pool Design

G FORCE: HIGH G MANUFACTURER: DERRICK CORPORATION

COUNTRY OF ORIGIN: USA SOUND: ≤ 78 dBA - 'A' WTD SOUND PRESSURE ISO 3744

SCREEN FRAME

MODEL: DERRICK DUAL POOL 626 (DP-626)

MACHINE TYPE: SHAKER, HIGH G LINEAR MOTION

w/ 1.5” High Pyramid Screen

12.0 ft² (1.1 m2)

Both SidesPanel Spring Assembly holds Urethane Screen Panels in place2 Elastomeric Stringer Protectors

Long-Life High Temperature approximately 180º F, 82º C Urethane

w/ 0.8” High Pyramid Screen

35.0 ft² (3.3 m2)29.1 ft² (2.7 m2)

Scalping Deck

VAPOR EXTRACTION (OPTIONAL) G.A. # 16760-00 SERIES

Self-Locking Hoods6" Victaulic Exhaust Fitting

Box Feeder VE - P/N 16808-01-001 Hood P/N 16770-01

Both SidesActuated Screen Compression System (ASCS)

TOTAL API NON-BLANKED SCREEN AREA

Weir Feeder P/N 16801-01Box Feeder P/N 16808-01

AVAILABLE FEEDER TYPES

AVAILABLE SCREENS

Approximately 0.5 - 1 Minute per Screen

10 Float Mount Isolators6 Primary - Air Actuated Compression, 24 Scalping

+1o to +7o

Push Button Electric Hydraulic Powered

DUAL POOL 626TECHNICAL SPECIFICATION SHEETDOC. # PE-S-052

Overall Equipment

Vibrating and AWD MotorsElectrical Circuit

Overall EquipmentMounting provisions for optional desander/desilter packages having up to twenty

Feeder

Electrical

Screen Frame

SAFETY FEATURESWarning labels advise personnel of potential hazards of moving equipment, high temperatures, and high voltage.Optional vapor extraction system to aid in removal of vapors.

Processing rates over 1500GPM, depending on mud density and screen panel type.

4” hydrocyclones - accepts up to three optional 10" desander cones.Ambidextrous design accommodates left- or right-hand installations.

PRODUCT FEATURES

Built-in scalping deck bypass standard on all feeders

Infinitely adjustable electric hydraulic AWD varies from +1° to +7°.Front-mounted AWD controls may be located remotely, if desired.

Weir feeder offers 34” weir height, Box feeder offers 45 1/2" weir height

Refer to DOC#PE-S-011

WARRANTYRefer to DOC#FI-C-003

Air-actuated screen compression offers positive locking, fast screen changing.

Press in place oil-resistant bed cushions offer complete sealing.

Urethane screen scalping deck provides efficient removal of coarse material increasing the life of primary deck screens.

Box Feeder VE 80 1/2” (2045 mm) 125" (3175 mm) 114 7/8" (2918 mm) 45 1/2" (1156 mm) 9700/4400

Up to 17% more API screen area than FLC-513.Unique concave primary screen design maximizes flow rate.Accepts Pyramid and Pyramid Plus screens for increased capacity.

STANDARDS FOR CONSTRUCTION

with Hydrocyclones

Box Feeder 80” (2032 mm) 125" (3175 mm) 114 7/8" (2918 mm) 45 1/2" (1156 mm) 9400/4264with Hydrocyclones

Weir Feeder VE 80 1/2” (2045 mm) 132 1/4" (3359 mm) 114 7/8" (2918 mm) 34" (864 mm) 9900/4491

Thermal overload protection switch.Automatic shaker shutdown if vibrating motor current overload or thermal overload occurs.

Weir Feeder VE 74 5/8” (1895 mm) 126 1/4" (3207 mm) 73 9/16" (1868 mm) 34" (864 mm) 5900/2676Weir Feeder 80” (2032 mm) 132 1/4" (3359 mm) 114 7/8" (2918 mm) 34" (864 mm) 9700/4400

with Hydrocyclones

with Hydrocyclones

Box Feeder VE 79” (2007 mm) 108" (2743 mm) 73 9/16" (1868 mm) 45 1/2" (1156 mm) 5800/2631Weir Feeder 74 5/8” (1895 mm) 126 1/4" (3207 mm) 73 9/16" (1868 mm) 34" (864 mm) 5700/2585

WEIGHTS & DIMENSIONS – EQUIPMENT (APPROXIMATE)

Box Feeder 79” (2007 mm) 108" (2743 mm) 73 9/16" (1868 mm) 45 1/2" (1156 mm) 5500/2495

DIMENSIONS (IN/MM)OPTIONS WIDTH LENGTH HEIGHT WEIR HEIGHT LBS/KG

DUAL POOL 626TECHNICAL SPECIFICATION SHEETDOC. # PE-S-052

STANDARD NEC/UL OPTIONS

OPTIONS are subject to Pricing,Scheduling & Engineering Design -

Contact Derrick Engineering

Hazardous AreaProtection Type IP 56

60Hz / 3 Phase 460/480V 575/600V 230/240V, 380/400V, 440VPower Requirement 3.8kVA 3.8kVA

50Hz / 3 Phase 380/400V 230/240V, 415V, 440VPower Requirement 3.8kVA

VolumeAir Quality

ModelQuantityPower

Lubrication

QuantityPower

OPTION #1:Standard Option Local/Onboard Control: Remote Control Panel:

Magnetic starters in an enclosurebuttons to energize the unit (ON/OFF) and raise that is supplied loose. A controland lower the screen bed angle (UP/DOWN) station on the front of the Unit.

A Junction Box will be provided atthe unit for motor connections andsupply wiring.OPTION #2:

Remote Control Panel:Same as Option #1 & the additionof an auxiliary control station(also supplied loose)OPTION #3:Remote Control Panel:A Junction Box will be provided at

the unit for motor connections andsupply wiring. A control station onthe front of the Unit.

CONTROLS

Magnetic starters in an enclosure with push

actual power.

Approximately 1HP (varies between 0.75 – 0.9 kW) 1

(See motor specification sheet for details)

22.5 HP (1.87 kW) Each

actual power. Continuous Oil Bath (See motor specification sheet for details)

AWD MOTOR

Power is approximate as several variables affect the

VIBRATING MOTORSG3X

NEMA 4, 7 & 9 // INGRESS PROTECTION (IP 55) Minimum

Power is approximate as several variables affect the

NOTE: Contact Derrick Engineering for any power configuration not listed.

COMPRESSED AIR90 PSI @ 1 CFM MinimumCompressed Air

UTILITIES

EQUIPMENT RATING

NEC/UL: CLASS I, DIV 1, GROUPS C&D

UTILIZATION VOLTAGE

DUAL POOL 626TECHNICAL SPECIFICATION SHEETDOC. # PE-S-052

AVAILABLE I.E.C. OPTIONS

OPTIONS are subject to Pricing,Scheduling & Engineering Design -

Contact Derrick Engineering

Hazardous Area ZONE 1, 2G Ex de IIB

Protection Type IP 56

60Hz / 3 Phase 460/480V 575/600V 230/240V, 380/400V, 440V, 690VPower Requirement 3.8kVA 3.8kVA

50Hz / 3 Phase 380/400V 230/240V, 415V, 440V, 690VPower Requirement 3.8kVA

VolumeAir Quality

Model SG3XQuantity 2Power 2.5 HP (1.87 kW) Each

Lubrication Continuous Oil Bath

Quantity 1Power

OPTION #1:Standard Option Local/Onboard Control: Remote Control Panel:

Magnetic starters in an enclosurebuttons to energize the unit (ON/OFF) and raise that is supplied loose. A controland lower the screen bed angle (UP/DOWN) station on the front of the Unit.

A Junction Box will be provided at

the unit for motor connections andsupply wiring.OPTION #2:Remote Control Panel:Same as Option #1 & the additionof an auxiliary control station(also supplied loose)OPTION #3:Remote Control Panel:A Junction Box will be provided atthe unit for motor connections andsupply wiring. A control station onthe front of the Unit.

EQUIPMENT RATING

UTILIZATION VOLTAGE

NOTE: Contact Derrick Engineering for any power configuration not listed.

(See motor specification sheet for details)

I.E.C.: ZONE 1, 2G Ex d IIB MinimumINGRESS PROTECTION IP 55 Minimum

UTILITIES

VIBRATING MOTOR

COMPRESSED AIR90 PSI @ 1 CFM MinimumCompressed Air

AWD MOTOR

Magnetic starters in an enclosure with push

Power is approximate as several variables affect theactual power.

(See motor specification sheet for details)

Approximately 1HP (varies between 0.75 – 0.9 kW) Power is approximate as several variables affect theactual power.

CONTROLS

DUAL POOL 626TECHNICAL SPECIFICATION SHEETDOC. # PE-S-052

AVAILABLE ATEX OPTIONS

OPTIONS are subject to Pricing,Scheduling & Engineering Design -

Contact Derrick Engineering

Hazardous Area ZONE 1, 2G Ex de IIB

Protection Type IP 56

60Hz / 3 Phase 460/480V 575/600V 230/240V, 380/400V, 440V, 690VPower Requirement 3.8kVA 3.8kVA

50Hz / 3 Phase 380/400V 230/240V, 415V, 440V, 690VPower Requirement 3.8kVA

VolumeAir Quality

Model SG3XQuantity 2Power 2.5 HP (1.87 kW) Each

Lubrication Continuous Oil Bath

Quantity 1Power

OPTION #1:Standard Option Local/Onboard Control: Remote Control Panel:

Magnetic starters in an enclosurebuttons to energize the unit (ON/OFF) and raise that is supplied loose. A controland lower the screen bed angle (UP/DOWN) station on the front of the Unit.

A Junction Box will be provided atthe unit for motor connections andsupply wiring.OPTION #2:Remote Control Panel:Same as Option #1 & the additionof an auxiliary control station(also supplied loose)OPTION #3:Remote Control Panel:A Junction Box will be provided atthe unit for motor connections andsupply wiring. A control station onthe front of the Unit.

actual power. (See motor specification sheet for details)

CONTROLS

Magnetic starters in an enclosure with push

(See motor specification sheet for details)

Power is approximate as several variables affect the

Approximately 1HP (varies between 0.75 – 0.9 kW) Power is approximate as several variables affect the

AWD MOTOR

actual power.

VIBRATING MOTOR

90 PSI @ 1 CFM Minimum

NOTE: Contact Derrick Engineering for any power configuration not listed.

COMPRESSED AIR

ATEX.: ZONE 1, 2G Ex d IIB Minimum

Compressed Air

INGRESS PROTECTION IP 55 Minimum

EQUIPMENT RATING

UTILIZATION VOLTAGE

UTILITIES