pe chemical resistancecmcso.asfjb.servertrust.com/v/vspfiles/polyco/poly... · chemical resistance...
TRANSCRIPT
2651/0204
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Page 1 of 10
Chemical Resistanceof VR and PolyWear Products
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°F 70°FAcetaldehyde 100% O UAcetic Acid (Glacial) Conc. O UAcetic Anhydride U UAcetic Acid 1-10% S SAcetic Acid 10-60% S OAcetic Acid 80-100% O UAcetone S SAcetone 100% U UAcrylic Emulsions S SAllyl Alcohol U UAllyl Chloride U UAluminum Chloride Dilute S SAluminum Chloride Conc. S SAluminum Fluoride Conc. S SAluminum Hydroxide Conc. S SAluminum Sulfate Conc. S SAlums (all types) Conc. S SAmmonia 100% Dry Gas S SAmmonium Carbonate S SAmmonium Chloride Sat’d S SAmmonium Carbonate Conc. S SAmmonium Chloride Sat’d S SAmmonium Fluoride 20% S SAmmonium Hydroxide S SAmmonium Hydroxide 35% S SAmmonium Metaphosphate Sat’d S SAmmonium Nitrate Sat’d S SAmmonium Persullitt Sat’d S SAmmonium Persulfate Sat’d S SAmmonium Sulfate Sat’d S SAmmonium Sulfide Sat’d S SAmmonium Thiocyanate Sat’d S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
PolyConversions, Inc.Technical Data
505 Condit DriveRantoul,IL 61866
217-893-3330888-893-3330
TMTM
Page 2 of 10
Ammonium Thiocyanst Sat’d S SAmyl Acetate 100% U UAmyl Alcohol 100% S SAmyl Chloride 100% U UAniline 100% S UAniline Hydrochloride Sat’d UAntimony Chloride U UAqua Acid U UAqua Regis O UArsenic Acid 100% S SBarium Carbonate Sat’d S SBarium Chloride Sat’d S SBarium Hydroxide Sat’d S SBarium Sulfide Sat’d S SBeer S SBenzene U UBenzene Sulfonic Acid S SBenzoic Acid Sat’d O OBenzoic Acid All Conc. S SBenzene Sulfonic Acid S SBismuth Carbonate Sat’d S SBlack Liquor S SBleach Lye 10% S SBorax Sat’d S SBorax Cold Sat’d S SBoric Acid Conc. S SBoric Acid Dilute S SBromic Acid 10% S SBromic Acid 100% U UBorax Cold Sat’d S SBromic Acid 10% S SBromine Liquid 100% U UBromine Water U UButanediol 100% S SButanediol 60% S SButanediol 10% S SButyl Alcohol 100% S SButyric Acid Conc. U UCalcium Bisulfide S SCalcium Carbonate Sat’d S SCalcium Chlorate Sat‘d S SCalcium Chloride Sat‘d S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°F
Page 3 of 10
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°FCalcium Hydroxide Sat’d S SCalcium Hydroxide S SCalcium Hypochlorite Bleach Sol’n S SCalcium Nitrate Sat’d S SCalcium Nitrate 50% S SCalcium Sulfate S SCamphor Oil U UCarbon Dioxide 100% Dry S SCarbon Dioxide 100% Wet S SCarbon Dioxide Cold Sat’d S SCarbon Disulfide U UCarbon Disulphide U UCarbon Monoxide S SCarbon Tetrachloride U UCarbonic Acid S SCaster Oil Conc. S SChloracetic Acid 100% U UChlorine Moist Gas O UChlorine Liquid U UChlorine Water 2% Sat’d Sol U UChlorobenzene U UChloroform 100% U UChlorosulfonic Acid U UChrome Alum Sat’d S SChromic Acid 10-20% S OChromic Acid 20% S SChromic Acid & Sulfuric Acid S OChromic Acid 50% S OCider S SCitric Acid Sat’d S SCoconut Oil Alcohols S SCola Concentrates S SCopper Chloride Sat’d S SCopper Cyanide Sat’d S SCopper Fluoride 2% S SCopper Nitrate Sat’d S SCopper Sulfate Dilute S SCopper Sulfate Sat’d S SCottonseed Oil 100% S SCottonseed Oil S SCresol 100% U UCresylic Acid 50% S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 4 of 10
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°FCuprous Chloride Sat’d S SCyclohexane 100% U UCyclohexanone U UCyclohexanol 100% S SDetergents, Synthetic S SDevelopers Photographic S SDextrin Sat’d S SDextrose Sat‘d S SDiazo Salts S SDibutylphthalate O ODiethylene Glycol 100% O UDiethylene Glycol S SDiglycolic Acid S SDimethylamine U UDioctyl Phthalate O UDisodium Phosphate Sat’d S SEmulsions, Photographic S SEthyl Acetate 100% O OEthyl Alcohol 35% S SEthyl Alcohol 100% S SEthyl Butyrate 100% O UEthyl Chloride U UEthyl Ether 100% U UEthylene Chloride U UEthylene Chlorohydrin U UEthylene Dichloride U UEthylene Glycol S SFerric Chloride Sat’d S SFerric Nitrate Sat’d S SFerric Sulfate Sat’d S SFerrous Chloride Sat’d S SFerrous Sulfate S SFish Solubles S SFluoboric Acid S SFluorine S UFluosilicic Acid 32% S SFluosilicic Acid Conc. S OFluoboric Acid S SFluorine S UFluosilicic Acid 32% S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 5 of 10
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°FFluosilicic Acid Conc. S OFormaldehyde 40% S SFormic Acid 20% S SFormic Acid 50% S SFormic Acid 100% S SFructose Sat’d S SFruit Pulp S SFuel Oil O UFurfural 100% U UFurfuryl Alcohol U UGallic Acid Sat’d S SGasoline U SGin U UGlucose S SGlycerine S SGlycol S SGlycolic Acid 30% S SGrape Sugar Sat’d Aq. S SHeptane 100% U UHydrobromic Acid 50% S SHydrocyanic Acid Sa’d S SHydrochloric Acid 10% S SHydrochloric Acid 30% S SHydrochloric Acid 35% S SHydrochloric Acid Conc. S SHydrofluoric Acid 40% S SHydrofluoric Acid 60% S SHydrofl uoric Acid 75% S OHydroflurosllicic 31.1% S SHydrogen 100% S SHydrogen Bromide 10% S SHydrogen Chloride Gas Dry S SHydrogen Peroxide 30% S OHydrogen Peroxide 90% S UHydrogen Phosphide 100% S SHydrogen Sulfide S SHydroquinone S SHypochlotous Acid Conc. S SInks S SIodine (in KI Sol’n) O U
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 6 of 10
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°FLactic Acid 10% S SLactic Acid 90% S SLead Acetate Sat’d S SLatex 100% S SLead Acetate Sat’d S SLead Tetra-Ethyle 100% SLinseed Oil O ULube Oil O UMagnesium Carbonate Sat’d S SMagnesium Chloride Sat’d S SMagnesium Hydroxide Sat’d S SMagnesium Nitrate Sat’d S SMagnesium Sulfate Sat’d S SMaleic Acid Sat’d S SMercuric Chloride Sat’d S SMercuric Cyanide Sat’d S SMercurous Nitrate Sat’d S SMercury S SMethyl Alcohol 100% S SMethyl Bromide O UMethyl Chloride O UMethyl Ethyl Ketone 100% U UMethylene Chloride 100% U UMethylsufuric Acid S SMilk S SMineral Oils O UMolasses Comm. S SNaphtha 100% S UNaphthalene U UNickel Chloride Sat’d S SNickel Nitrate Con. S SNickel Nitrate Conc. S SNickel Sulfate Sat’d S SNicotinic Acid 100% S SNitric Acid 0-30% S SNitric Acid 30-50% S ONitric Acid 70% S ONitric Acid 95-98% U UNitrobenzene 100% U UOctyl Cresol O U
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 7 of 10
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°FOils and Fats O UOleic Acid Conc. O UOleum Conc. U UOrange Extract Dilute S SOxalic Acid Dilute S SOxalic Acid Sat’d S SOxygen 100% SOzone 100% O UPerchloric Acid 10% S SPetroleum Ether U UPhenol 90% U UPhosphoric Acid 0-30% S SPhosphoric Acid Over 30% S SPhosphoric Acid 90% S UPhosphorus (Yellow) 100% SPhosphorus Pentoxide 100% S SPhosphorus Trichloride SPhotographic Solutions S SPickling Baths
Hydrochloric AcidSulfuric AcidSulfuric-Nitaric
SSS
SS
Pickling Baths,Sulfuric AcidHydrochloric AcidSulfuric-Nitric
SSS
SS
Picric Acid 1% S OPlating Solutions Brass Cadmium Chromium Copper
Gold Indium Lead Nickel Rhodium Silver Tin Zinc
SUSSSSSSSSSS
SUSSSSSSSSSS
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 8 of 10
VE & PolyWearProductsChemical or Solvent Concentration
70°F 140°FPlating Solutions Brass Cadmium Chromium Copper Gold Indium Lead Nickel Rhodium Silver Tin Zinc
SUSSSSSSSSSS
SUSSSSSSSSSS
Plating Solutions Brass Cadmium Chromium
Copper Gold Indium Lead Nickel Rhodium Silver
Tin Zinc
SSUSSSSSSSSS
SSUSSSSSSSSS
Potassium Bicarbonate Sat’d S SPotassium Borate 1% S SPotassium Bromate 10% S SPotassium Bromide Sat’d S SPotassium Carbonate S SPotassium Chlorate Sat’d S SPotassium Chloride Sat’d S SPotassium Chromate 40% S SPotassium Cyanide Sat’d S SPotassium Dichromate 40% S SPotassium Ferricyanide Sat’d S SPotassium Ferri/Ferro Cyanide S SPotassium Fluoride S SPotassium Hydroxide 20% Conc. S SPotassium Nitrate Sat’d S SPotassium Petborate Sat‘d S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 9 of 10
VR & PolyWearProductsChemical or Solvent Concentration
70°F 140°FPotassium Perchlorate Sat’d S SPotassium Perchlorate 10% S SPotassium Permanganate 20% O UPotassium Persulfate Sat’d S SPotassium Sulfate Conc. S SPotassium Sulfide Conc. S SPotassium Sulfite Conc. S SPotassium Persullate Sat’d S SPropargyl Alcohol S SPropyl Alcohol S SPropylene Dichloride 100% U UPropylene Glycol S SRayon Coagulating Bath S SSea Water S SSelenic Acid S SShortening S SSilicic Acid S SSilver Nitrate Sol'n S SSoap Solution Conc. S SSodium Acetate Sat’d S SSodium Benzoate 35% S SSodium Bicarbonate Sat’d S SSodium Bisulfate Sat’d S SSodium Bisulfite Sat'd Sat’d S SSodium Borate S SSodium Bromide Oil Sol’n S SSodium Carbonate Conc. S SSodium Chlorate Sat’d S SSodium Chloride Sat’d S SSodium Cyanide S SSodium Cyanide S SSodium Dichromate Sat’d S SSodium Ferricyanide Sat’d S SSodium Fluoride Sat’d S SSodium Hydroxide Conc. S SSodium Hypochlorite S SSodium Nitrate S SSodium Sulfate S SSodium Sulfide 25% S SSodium Sulfide Sat’d Sol’n S SSodium Sulfide 25% to Sat’d S SSodium Sulfite Sat’d S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance
Page 10 of 10
VR & PolyWearProductChemical or Solvent Concentration
70°F 140°FStannic Chloride Sat’d S SStannous Chloride Sat’d S SStarch Solution Sat’d S SStearic Acid 100% S SSulfur Colloidal SSulfur Dioxide Dry, 100% S SSulfur Dioxide Wet, 100% SSulfur Trioxide S SSulfuric Acid 0-50% S SSulfuric Acid 70% S OSulfuric Acid 80% S USulfuric Acid 96% O USulfuric Acid 98% Conc. O USulfuric Acid Fuming U USulfurous Acid S STallow S OTannic Acid 10% S STanning Extracts Comm. S STartaric Acid 10% S STartaric Acid Sat’d U UTetralin U UTetrahydrofuran 100% U UToluene U UTetrachloroethylene 100% U UTetrahydrofurane O OTransformer Oil O UTrichloroacetic Acid 10%Trichloroethylene U UTriethanolamine 100% S UTrisodium Phosphate Sat’d S STurpentine S UUrea Upt to 30% S SUrea S SUrine S SVinegar Comm. S SVanilla Extract S SWetting Agents S SWhiskey S SWines S SXylene U UYeast S SZinc Chloride Sat’d S SZinc Sulfate Sat’d S S
S = satisfactory (no attack) O = slight attack U = unsatisfactory70•F = 21•C, 140•F = 60•C
The information on this document is, to our knowledge, true and accurate. However, since the particular uses and the actual conditions of use of our products are beyond our control, establishing satisfactory performance of our products for the intended application is the customer's sole responsibility. All uses of PolyCo products and any written or oral information, suggestions or technical advice from PolyCo are without warranty, express or implied, and are not an inducement to use any process or product in conflict with any patent.
PolyCo materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. PolyCo makes no representation, promise, express warranty or implied warranty concerning th e suitability of these materials for use in implantation in the human body or in contact with internal body tissues or fluids.
More detailed safety and disposal information on our products is contained in the Material Safety Data Sheet (MSDS). All users of our products are urged to retain and use the MSDS. You may request a copy by calling PolyCo Customer Service toll-free at (888) 893-3330.
Chemical Resistance