case case a brief history about case j.i. case company produced their first tractor in 1892. they...

67STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com

Case

CaseA brief history about Case

J.I. Case Company produced their first tractor in 1892. They were already known well for their threshing machines. Case adopted the famous, “Old Abe” eagle trademark in 1865 as a symbol of honesty, integrity and reliability. The eagle, Old Abe was a civil war mascot and has an interesting history himself.

"1939 Case RC with sunburst grille." Scott Neidhardt, Albion, Nebraska

Customer submitted photos

Thanks for giving us your best shot! The following photos were submitted by folks just like you in our annual catalog photo contest. Our complete album can be viewed at http://www.steinertractor.com/tractor-photo- winners.html. View more pictures and tractor stories in our digital books on our web site under "Steiner Community."

"Plowed a lot of snow with this Case (purchased for $650.), some dirt and other odds and ends. Cleaned it up and painted it in 2015." Gary French, S. Plymouth, New York

"1969 Case 1660 Combine 20' header, 100 bushel grain tank." Tom Stanley, Gillette, Wyoming

"1936 Case RC with over the top steering." Scott Neidhardt, Albion, Nebraska

"Case 430 tractor with a Case 555 haybine being cleaned by the Cockshutt mechanic farm hand." Randy Denney, Ontario, Canada

ABC1315

ABC1315

ABC1315

68 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm

Cas

e

We carry a wide variety of tractor parts for old Case tractors. Whether you want to repair or restore your classic, we have the

tractor parts you need!

AAir cleaner parts caps ........................................... 97, 98 clamp ............................................... 98 filter element ................................. 98 oil cups ............................................ 98 pipe .................................................. 97 vacuator valve .............................. 98Alternators, parts alternators ............................... 90, 91 bracket ............................................ 91 mounting kits ............................... 91 pulleys ............................................. 91Amp gauges ..................................... 85

BBattery cables .................................. 87Battery clip ........................................ 87Battery retainer j-bolt.................... 87Boots .................................................102Brake parts belt pulley brake linings .........106 boots ..............................................107 disc brake balls ..................106, 107 disc brake linings .......................106 discs ................................................106 lining kit ........................................106 riveting tools ...............................107 seals .......................................106, 107 springs ...........................................106

CCamshaft, parts bearing & bushing sets .............. 75 camshaft ......................................... 75 lifter .................................................. 75Caps air cleaner ................................ 97, 98 distributor ...................................... 88 fuel ...........................................99, 100 magneto ......................................... 90 oil fill / breather ............................ 77 pre cleaner ..................................... 98 radiator ..................................... 83, 84 rain .................................................... 80Carburetors, parts adjustment needle assy ............ 81 bracket ............................................ 88 bushing ........................................... 81 carburetors ............................. 80, 81

CCarburetors, parts cont... elbow strainer assy ..................... 81 floats.......................................... 81, 82 gaskets ............................................ 81 needle float valves ...................... 81 nozzles ............................................. 81 repair kits ................................. 82, 83Choke parts cables ............................................... 80 clip .................................................... 80Cigarette lighters ............................ 87Clutch, trans. parts alignment tools ..........................101 bearing ..........................................101 bushing .........................................101 disc ..................................................101 gasket ............................................101 pressure plate .............................101 seals ................................................101 throw out bearings ...................101Crankshaft, parts bearings ................................... 76, 77 crankshaft....................................... 75 seals .................................................. 76

DDash light, parts cover................................................. 94 dash light ........................................ 94Decals ...............................................112Distributor parts bracket ............................................ 88 bushing & shim kit ...................... 88 caps .................................................. 88 clamp ............................................... 88 clips .................................................. 88 coils ................................................... 88 cover................................................. 89 dust cover ....................................... 88 gasket .............................................. 88 ignition tune up kits ................... 89 resistor ............................................. 88 rotor buttons ................................. 89 spark plug wire sets .................... 89 spark plugs .................................... 89 tags ................................................... 89 terminal insulator assys ............. 88Drawbars, parts bushing .........................................111 drawbars .......................................111 lock .................................................111 pins .................................................111 stabilizer bar ................................111 stabilizer kit .................................111 top links ........................................111

EEagle hitch latch set, parts ........111 knob ...............................................111 latch ................................................111 locks ...............................................111 pin and clips ................................111Electric outlet socket, parts boot .................................................. 87 connector plug ............................. 87 socket............................................... 87Emblems / nameplates emblems ......................................... 97Engine assy., break in lube .......... 77Engine gasket sets ......................... 74Engine oil caps ................................ 77Engine overhaul kits ...................... 74

FFan belts ............................................. 85Flywheel ring gears ....................... 79Fuel filters element .........................................101 filter ................................................100 screen ............................................101Fuel tank parts caps .........................................99, 100 gaskets ...................................99, 100 liner kit ............................................ 99 webbings ........................................ 99Fuse holder ....................................... 87

GGauges amp .................................................. 85 oil pressure .................................... 85 water temperature ...................... 86Gear shift parts boots ..............................................102 knobs .............................................102 seal ..................................................102Gears flywheel ring ................................. 79 PTO .................................................107 tachometer .................................... 86Generator parts band cover ..................................... 90 cut-out assy ................................... 90 tags ................................................... 90Grille parts clip .................................................... 97 nuts ................................................... 97 stub assy ......................................... 97

HHeadlights, parts bezels ............................................... 94 bulbs ........................................94 - 96 gaskets ...................................... 95,96

HHeadlights, parts cont... headlights ...................................... 93 knobs ........................................ 95, 96 lens ............................................ 95, 96 reflectors .................................. 95, 96 ring ................................................... 94 rings........................................... 95, 96 switches ................................... 95, 96 terminal .................................... 95, 96 washer ............................................. 94Hydraulic seal .................................107

IIgnition parts bushing and shim kit ................. 88 caps .................................................. 88 clamp ............................................... 88 clips .................................................. 88 coils ................................................... 88 cover................................................. 89 dust cover ....................................... 88 gasket .............................................. 88 resistor ............................................. 88 rotor buttons ................................. 89 spark plug wire sets .................... 89 spark plugs .................................... 89 tags ................................................... 89 terminal insulator assys ............. 88 tune-up kits ................................... 89Ignition/key switches .................... 92

KKnobs .......................................102, 111

LLight switches, parts knobs ............................................... 93 resistor ............................................. 93 switches .......................................... 93

MMagnetos, parts caps .................................................. 90 coils ................................................... 90 condensors .................................... 90 gaskets ............................................ 90 magneto ......................................... 90 manual ............................................ 90 points ............................................... 90 rotor.................................................. 90 stop button kit .............................. 90Manifolds, parts adaptor ............................................ 72 elbows ...................................... 71, 73 exhaust pipes ................................ 71 ferrules ............................................ 72 gasket material ............................. 73

Case: Alphabetical index


Case

MManifolds, parts cont... gaskets ....................................71 - 73 manifolds ................................. 71, 72 nuts ................................................... 73 plates ............................................... 71Manuals ............................................113Mufflers, parts clamps ............................................. 79 mufflers .................................... 79, 80

OOil / breather caps .......................... 77Oil filters ............................................. 78Oil pan drain plug drain plug ....................................... 78 gaskets ............................................ 78 washer ............................................. 78Oil pressure gauges, parts copper line kit ............................... 85 fittings ...................................... 85, 86 gauges ............................................. 85 switches .......................................... 85Oil pump parts repair kit .......................................... 78 springs ............................................. 78

PPiston ring sets ......................... 73, 74Power steering parts bolt .................................................104 couplers ........................................104 filter ................................................103 port blocks ...................................104 priority flow control valve ......104 pulley .............................................104 pump .............................................103 seal and o-ring kit......................103 shaft cross and bearing ...........104 torque generator .......................104Pre-cleaner parts base .................................................. 99 bowls ......................................... 98, 99 caps assys ....................................... 98 clip/springs kit .............................. 99 covers ............................................... 98 pre-screener .................................. 99 screen .............................................. 99PTO parts gears ...............................................107 mounting plates ........................108 over-running clutches .............108 seals ................................................107 shields ............................................108

RRadiator, parts caps ........................................... 83, 84

RRadiator, parts cont... clamp ............................................... 83 core ................................................... 83 drain plug ....................................... 83 gaskets ............................................ 83 mounting pad ............................... 83 radiators .......................................... 83Raincaps ............................................. 80Rims, rear and front bolts ......................................109, 111 inner tube valves .......................109 nuts .................................................109 rear rim bolt assys .....................109 reinforcing ring ..........................110 rims .................................................110 stops ...............................................111 tires, tubes ....................................109 washer ...........................................109 wheels ..................................108, 109

SSeats, parts adjustment handle ...................105 assy .................................................104 back ................................................105 bearing ..........................................105 bushing repair kits ...........104, 105 bushings .......................................105 coil .........................................104, 105 pads ................................................105 pan ..................................................105 pivot support rod ......................105 shock absorbers .........................105 springs ..................................104, 105Sediment bowl assys., parts bail assys .......................................100 gaskets ..........................................100 glass bowls...................................100 screens ..........................................100 sediment bowl assys ................100Serial number tags, parts rivets ................................................. 97 tags ................................................... 97Sleeve sealing o-rings ................... 74Spark plug wiring sets .................. 89Spark plugs ....................................... 89Starters, parts band cover ..................................... 91 drives ............................................... 91 keys ................................................... 92 repair studs .................................... 91 spring ............................................... 91 starter solenoids .......................... 91 switches .......................................... 92 tags ................................................... 91Steering column boot .................102

SSteering wheels, parts ball kit ............................................103 center caps / emblems ............103 grommet .......................................102 nuts ........................................102, 103 plate ...............................................102 race .................................................103 seal ..................................................102 sector pin stud ............................103 spinner ..........................................103 spinner knob ...............................103 steering wheels .................102, 103

TTachometer parts cables ............................................... 86 drive assys. ..................................... 86 gaskets ............................................ 86 gears ................................................. 86Tail lights, parts bulbs ........................................94 - 96 gaskets ..................................... 95, 96 knobs ........................................ 95, 96 lens ............................................ 95, 96 reflectors .................................. 95, 96 rings........................................... 95, 96 switches ................................... 95, 96 tail lights .................................. 94, 95 terminal .................................... 95, 96Thermostats ..................................... 84Three point hitch, parts bushing .........................................111 drawbar .........................................111 drawbar lock................................111 pins .................................................111 stabilizer bar ................................111 stabilizer kit .................................111 top links ........................................111Tie rod boots ..................................104Tires, tubes ......................................109 nut ...................................................109 valves .............................................109Toolboxes ........................................105Top-links, parts pins .................................................111 top links ........................................111Transmission, clutch parts .........101 alignment tools ..........................101 bearing ..........................................101 disc ..................................................101 gasket ............................................101 lever ................................................101 pressure plate .............................101 seals ................................................101 throw out bearings ...................101

VValve cover gaskets ........................ 75Valve grind gasket sets ................. 74Valve train kit ................................... 75Video .................................................112Voltage regulators .......................... 90

WWarning lights, parts .............. 94, 95 bulbs ................................................ 95Water pumps .................................... 84 gasket .............................................. 84 seal .................................................... 84Water temperature gauges ......... 86Wheels, front and rear bearing kit ....................................108 bolt .................................................108 inner tube valves .......................109 lock nuts .......................................108 nuts .................................................109 reinforcing ring ..........................110 rims .................................................110 tires, tubes ....................................109 wheels ..................................108, 109Wiring harness kits ......................... 87 grommet ......................................... 87

http://www.steinertrator.com


Cas

e

Models C, CC, CI, CO, R, RC, D, DC, DI, DO, LA, LAI, S, SC, SI, SO,

V, VA, VC, VI, VO, VAC, VAH, VAI, VAO

1929 ....................3002011930 ....................3003011931 ....................3004011932 ....................3005011933 ....................3006011934 ....................3007011935 ....................3008011936 ....................3009011937 ....................3010011938 ..................42000011939 ..................43000011940 ..................44000011941 ..................45000011942 ..................46000011943 ..................47000011944 ..................48000011945 ..................49000011946 ..................50000011947 ..................51000011948 ..................52000011949 ..................53000011950 ..................54000011951 ..................55000011952 ..................5600001

... For Model VAC:1953 ..................57500011954 ..................60110011955 ...............60338001

... For Model D, LA:1953 ..................57500011954 ..................5800001

... For S series:1953 ..................57000011954 ..................8035001

Model 200B, 210B1958 ..................60950011959 ..................6120001

Model 211B, 311B, 411B, 511B, 611B

1958 ..................50950011959 ..................6120001

Model 300, 3201956 ..................60503011957 ..................6075001

Model 300B, 310B, 320B

1958 ..................60950011959 ..................6120001

Model 300, 4001957 ..................3000001

Model 3201956 ..................60503011957 ..................60750011958 ..................60950011959 ..................6120001

Model 4001955 ..................80600011956 ..................80800011957 ..................8100001

Model 400B1958 ..................60950011959 ..................6120001

Model 420B1958 ..................60950011959 ..................61200011960 ..................3012275

Model 430, 5301960 ..................61440011961 ..................61626011962 ..................81900011963 ..................82080011964 ..................82290011965 ..................82535011966 ..................82790011967 ..................83065011968 ..................83321011969 ..................8356251

Model 430, 530 Utility

1960 ..................30122751961 ..................3016001

Model 440, 540, 740, 840, 940

1960 ..................81600011961 ..................81688011962 ..................81900011963 ..................82080011964 ..................82290011965 ..................82535011966 ..................82790011967 ..................8306501

1968 ..................83321011969 ..................8356251

Model 730, 830, 930, 1030

1960 ..................81600011961 ..................81680011962 ..................81900011963 ..................82080011964 ..................82290011965 ..................82535011966 ..................82790011967 ..................83065011968 ..................83321011969 ..................8356251

70 series SN: stamped on LH

side, just above the platform floor, next to steering wheel.

Model 470, 570, 580B, 770, 870, 970,

1070, 1090, 11701970 ..................86500011971 ..................86740011972 ..................86918011973 ..................87120011974 ..................87366011975 ..................8770001

Model 5001953 ..................56224061954 ..................80350011955 ..................80600011956 ..................80800011957 ..................8100001

Model 500B, 600B1958 ..................60950011959 ..................6120001

Model 600 1957 ..................8100001

Model 680C1969 ..................91032261970 ..................91046511971 ..................9106001

Model 700, 800, 9001957 ..................81000011958 ..................81200011959 ..................8140001

Model 1031, 10321966 ..................82790011967 ..................83065011968 ..................83321011969 ..................8356251

Model 1175, 1270, 1370, 2470

1972 ..................86930011973 ..................87120011974 ..................87366011975 ..................8770001

Model 1200TK1966 ..................98021011967 ..................98061011968 ..................98080001969 ..................9808276

Model 1470TK1969 ..................98100001970 ..................98113011971 ..................86740011972 ..................8691801

Model 2470, 26701971 ..................86740011972 ..................86923811973 ..................87120011974 ..................87620011975 ..................8767001

Model L, LI1929 ....................3032011930 ....................3033011931 ....................3034011932 ....................3035011933 ....................3036011934 ....................3037011935 ....................3038011936 ....................3039011937 ....................3040011938 ..................42000011939 ..................43000011940 ..................4400001

DAVID BROWNModel 770

1965 ....................5800011966 ....................5825131967 ....................5866731968 ....................5885791969 ....................5906461970 ....................592237

Model 7801967 ....................6000011968 ....................6008791969 ....................6028531970 ....................6061091971 ....................609665

Model 880 Selectmatic

1965 ..................522384*1965 ....................5300011966 ....................5310221967 ....................5394101968 ....................5460001969 ....................5515531970 ....................5570131971 ....................560766*Prior "Implematic" series

Model 990 Selectmatic

1965 ..................472273*1965 ....................4820011966 ....................4837681967 ....................4962831968 ....................5046901969 ....................8081501970 ....................8183011971 ....................8500011972 ....................8506001973 ....................8544031974 ....................8593671975 ....................863900*Prior "Implematic" series

Model 9951971 ....................9200011972 ....................9213831973 ....................9251581974 ....................9285751975 ....................9317721976 ...............110700011977 ...............110802361978 ...............110891411979 ...............110968281980 ...............11104577

Model 9961972 ....................9800011973 ....................9817761974 ....................9841451975 ....................9862721976 ...............11070001

Model 12001967 ....................7000011968 ....................7044331969 ....................7079581970 ....................7122031971 ....................716091

Model 12101971 ....................7200011972 ....................7200531973 ....................7223051974 ....................7246591975 ....................7280801976 ...............111500011977 ...............11154968

For 6 digit serial numbers (up to 1938) use the 1st & 4th digit and then subtract (3) three to find the year of your Case tractor. EXAMPLE: 300201 (1932) - (3) = YEAR 1929

For 7 digit serial numbers (1938 to 1953) use the 1st & 2nd digit and then subtract (4) four to find the year or your Case tractor. EXAMPLE: 4200001 (1942) - (4) = YEAR 1938

1978 ...............111596541979 ...............111633051980 ...............11166342

Model 12121971 ..................10000011972 ..................10002401973 ..................10011821974 ..................10024871975 ..................1005238

Model 14121975 ..................1050004

Model 38001968 ....................6500011969 ....................6502771970 ....................650358

Model 46001968 ....................9000011969 ....................9003121970 ....................900422

Case: Beginning serial numbers


Case

Manifolds, partsOrder # Price Description / Application

CKS103 $224.95Exhaust Manifold fits: C, CC, D series, Replaces: 5360A

CKS103GK $28.50 3-pc. Int & Exh Manifold Gasket Set w/out Ferrules fits: C, CC, D, DC series, Replaces: 0891AB, 1349074C1NOTE: Includes (2) manifold gaskets & (1) carburetor gasket.

CKS101 $49.95

Exhaust Elbow fits: C, D, DCReplaces: 5148A (2.275" pipe O.D., 3-1/2" c.c. bolts, 9" o/a length)

MHS006 $138.50 Manifold fits: V, VC, VI, VO, Terra Trac Crawler; Silver King Model 42; Many miscellaneous F124, F140, F162 flathead Continental enginesReplaces: Continental F124E-500(1-1/2" pipe thread; 15-1/2" c.c. outside holes & 16-3/4" o/a)

MHS006EXP $9.99Exhaust Pipe fits: V, VC, VI, VO, Terra Trac, Crawler (1-1/2" pipe, 2-11/16" length) USA made

IHS001EXP $10.95

Exhaust Pipe fits: V, VC, VI, Terra Trac, Crawler, Replaces: VT2290(1-1/2" pipe, approx. 8" length)

MHS006GK $9.95 Gasket (For MHS006)Replaces: Continental F400E-303 USA made

CKS083 $49.50

Exhaust Elbow fits: VA, VAC, VAH, VAI (All up to engine SN: A4700000 w/ a 1-pc. manifold) Replaces: VT200

CKS085 $204.95 2-pc. Int & Exh Manifold fits: VA, VAC, VAH, VAI, VAO (All engine SN: A4700001 & up w/ a 2-pc. manifold), Replaces: VT329, VT330NOTE: Will not fit engines w/ 1-piece intake & exhaust manifolds.

MHS006GK $9.95Gasket (For CKS085)USA made

CKS056 $38.00Exhaust Elbow fits: Same as CKS085, but will not fit VAOReplaces: VT286

Manifolds, parts cont...Order # Price Description / Application

CKS065EX $135.00 Exhaust Manifold only fits: 200B, 300B, 350, 400B, 420B, 510B, 511B, 610B, 611B; Dozers: 310, 310C, 320, 420 (All w/ G126, G148, G164 C.I. gas engine), Replaces: G1064, G2009

CKS2618 $7.95Manifold Block Off Plate fits: Same as CKS065EX, Replaces: G1067(3" c.c. holes) USA made

MHS006GK $9.95Gasket (For CKS065EX)Replaces: VT3394 USA made

CKS065ELB $49.95Exhaust Elbow fits: Some 200B, 300B, 400B, 510B, 511B (All w/ vertical exhaust), Replaces: G2022 (1-15/16" O.D. pipe outlet, 3.00" c.c. bolt holes)

CKS2614 $3.85 Exhaust Elbow or Block Off Plate Gasket fits: Same as CKS083, CKS085, CKS056, CKS065EX, CKS065ELB, Replaces: G11201, 1349111C1 (3" c.c. bolt holes, 1-3/4" I.D. center hole)

CKS069 $201.15 Manifold w/ (2) Plates fits: 430, 530, 470, 570, 480, 480B, 580, 580B gas; Dozers: 310D, 310E, 310F, 310G, 420B, 420C gas; Wheel Loaders: W3 gas, Replaces: G2042, A39231(15-5/8" c.c. outer bolt hole)

CKS069PLATE

$7.95

Plate only fits: Same as CKS069, CKS053, Replaces: G2044 USA made

MHS006GK $9.95

Gasket (For CKS069) USA made

FDS021GK $2.35 Gasket only (For Block Off Plate) Fits: Same as CKS069, CKS053(2-1/4" center hole, 3-3/8" c.c. bolt pattern) NOTE: Sold individually.

CKS053 $168.50 Exhaust Manifold w/ (2) Plates (188 & 207 diesel, triple outlet) Fits: 430, 530, 630; Industrial Backhoes: 470, 480, 480B, 480C, 480D, 480LL, 570, 580, 580B, 580C, 580D; Wheel Loaders: W3, W5A, W11; Crawlers: 310E, 310F, 310G, 350, 350B, 420C, 450, 450B; Forklifts: 580, 584, 584C, 584D, 585C, 585D, 586C, 586D; Skid Steers: 1740, 1835, 1845, 1845S, Replaces: G2113, A39233, A182084

Manifolds, parts continue on next page

En

gin

e parts

http://www.steinertractor.com

https://www.steinertractor.com/CKS103

https://www.steinertractor.com/CKS103GK


https://www.steinertractor.com/MHS006

https://www.steinertractor.com/MHS006EXP

https://www.steinertractor.com/IHS001EXP

https://www.steinertractor.com/MHS006GK





https://www.steinertractor.com/CKS065EX



https://www.steinertractor.com/CKS065ELB






https://www.steinertractor.com/FDS021GK



Cas

eE

ng

ine

par

tsManifolds, parts cont...

Order # Price Description / Application

CKS053GK $24.50Gasket Set (For CKS053)Replaces: G46872 USA made

CKS061 $31.70 Exhaust Adaptor (For 2-1/2" muffler) Fits: Same as CKS053Replaces: G2095, D73198(6-1/8" tall)

CKS070 $299.95 Exhaust Manifold (Gas) fits: 730 gas, 830 gas, Loader; Serviceable for 700, 800 gas, Replaces: A20867, A11250NOTE: The 830 exhaust outlet pipe is 2-1/2" & the 800 exhaust is 2-1/4". Customer must use a new muffler (CKS1777) for a 700 & 800.

CKS2382 $4.50 Intake Manifold Gasket fits: 400 gas (2 used); 600 LP (3 used); 700, 730, 800 gas (2 used); 900 LP, Early 930 up to 1964 gas (3 used), Replaces: A7363, 1349068C1 (2.253" O.D., 1.535" I.D., 0.095" thick) NOTE: Sold individually. See website for full applications.

CKS2384 $4.50 Exhaust Manifold Gasket fits: L, LA intake (2 used); 400 gas, diesel (4 used); 500 diesel, 600 LP, diesel (6 used); 700, 730, 800 gas (4 used) 900 gas, diesel (6 used); Early 930 gas up to 1964 (6 used), Replaces: O1437AB, O9815AB, A27909, 1349071C1(2.506" O.D., 1.786" I.D., 0.085" thick)NOTE: Sold individually.

CKS2378 $4.50 Intake Manifold Gasket fits: 400 series diesel (2 used); 500, 600 diesel (3 used); 830 gas (2 used); 900 diesel (3 used), Replaces: O9814AB, A29943, 1349075C1 (2.254" O.D., 1.720" I.D., 0.095" thick) NOTE: Sold individually.

CKS2380 $4.50 Manifold Gasket fits: 700, 800, 930 series diesel (4 to 6 used exhaust); 830 gas (4 used exhaust); 730 diesel (2 to 4 used intake/exhaust)Replaces: A11889, 1349070C1(2.642" O.D., 1.917" I.D., 0.110" thick) NOTE: Sold individually. See website for full applications.

CKS2361 $7.95 Manifold Ferrule (Exhaust, unless noted) fits: C, CC, D, DC, 400 gas, LP, diesel; 500 diesel, 600 LP, diesel; 700, 800 gas, LP; 900 diesel exhaust, 910B LP intake, Replaces: 0887AB, O9813AB, A27908 (1.750" O.D., 1.625" I.D., 0.500" long) USA madeNOTE: Sold individually; 4-cyls. use (4), 6-cyls. use (6) per engine.

Manifolds, parts cont...


CKS2370 $7.95 Manifold Ferrule (Intake) fits: C, CC, D, DC, 400, (600 LP), 700, 800, (900, 930 LP), Replaces: O886AB, A26433(1.500" O.D., 1.375" I.D., 0.500" long, 1/16" wall thickness) USA madeNOTE: Sold individually. 4-cyls. use (2), 6-cyls. use (3) per engine.

CKS2386 $7.95 Manifold Ferrule (Exhaust) fits: 700, 800 diesel (4 used); 830 gas (4 used); Early 930 diesel up to 1964 w/ center exhaust (6 used), Replaces: A11837(1.879" O.D., 1.738" I.D., 0.072" thick, 0.500" wide) USA made NOTE: Sold individually. See website for full applications.

CKS2389 $9.85 Manifold Ferrule (Exhaust) fits: 730 gas (4 used); Early 930 gas up to 1964 (6 used), Replaces: A21635(1.885" & 1.752" tapered O.D., 1.625" to 1.743" tapered I.D., 0.493" wide)NOTE: Sold individually.

CKS2395 $9.85 Manifold Ferrule (Intake) fits: 730 gas (2 used); 930 gas w/ engine SN: 2142563 & up, 1965 & up (3 used)Replaces: A21634 (1.681" to 1.504" tapered O.D., 1.368" to 1.531" tapered I.D., 0.505" wide) NOTE: Sold individually.

CKS2399 $7.95Manifold Ferrule (Intake) fits: 830 gas (2 used), Replaces: A20814(1.685" O.D., 1.560" I.D., 0.500" wide)USA made NOTE: Sold individually.

CKS042 $257.502-pc. Exhaust Manifold fits: 930 diesel, LP, 1030 dieselReplaces: A24714, A24715

CKS042GK $40.75Gasket set (diesel only) (For CKS042), Replaces: A34875USA made

CKS001B $98.50 Center Manifold fits: 1170, 1175, 1270, 1370, 1470, 1570, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 3294, 3394, 3594, 4490, 4494, 4690, 4694, 451, 504 C.I. diesel engine Replaces: A76322, A58906 NOTE: Also fits Industrial applications. See website for full applications.

CKS014 $59.95

End Manifold fits: Same as CKS001BReplaces: A58907, A65917
















https://www.steinertractor.com/CKS001B



Case

Manifolds, parts cont...Order # Price Description / Application

CKS001GK $31.80

Gasket Set (For CKS001B)Replaces: A58895 (manifold), A58899 (turbo gasket)

ABC2511 $3.95 Turbocharger to Exhaust Manifold Mounting Gasket fits: Same as CKS001B, Replaces: A58899 USA made NOTE: See website for full applications.

CKS016 $98.50

Exhaust Elbow fits: 1470, 1570, Industrial, Replaces: A58904, A61941NOTE: See website for full applications. Close out.

ABC1878 $1.75 Manifold Nut & Lockwasher Fits: CC, DC series, 400, 500, 600, 700, 730, 800, 830, 900, 930 series gas, diesel, Replaces: 25-117 (7/16" - 20 NF) NOTE: Brass nut, yellow zinc lock washer. 6 or more used per tractor; Sold individually.

ABC2286 $0.95 Manifold Nut fits: RC, SC series using a 3/8" - 24 NF nut (3/8" - 24 NF) NOTE: Brass. Sold individually.

ABC2290 $0.95 Manifold Nut fits: V, VC, VAC, 200B - 630 gas, LP, diesel, Replaces: VT3362(3/8" - 16 NC) NOTE: Brass. Sold individually.

Make your own gasket with ourgasket material. Made in the USA!


ABC448 $18.40 Exhaust Manifold Gasket Material(1/16" thick x 12" wide x 28-1/2" long)NOTE: Perforated steel core.

ABC1830 $13.95 Cork / Rubber Rollpack Gasket Material (1/16" thick x 12" wide x 24" long)NOTE: For making general purpose gaskets. Do not use for high temperature applications.

ABC1835 $14.50 Cork / Rubber Rollpack Gasket Material (3/32" thick x 12" wide x 24" long)NOTE: For making general purpose gaskets. Do not use for high temperature applications.

ABC1844 $15.95 Gasket Paper (0.0160" thick x 18" wide x 98" long) NOTE: For making general purpose gaskets. Do not use for high temperature applications.

ABC1846 $22.95 Gasket Paper (0.0275" thick x 20" wide x 108" long) NOTE: For making general purpose gaskets. Do not use for high temperature applications.

Piston ring sets - USA made (unless noted)NOTE: Measure old rings before ordering.

Order # Price Application

Fits: CC, DC series 4-cyl., Replaces: 3721AAABC2080 $105.20 ABC2080: 3-7/8" bore, (3) 0.125" compression

rings, (1) 0.250" oil ring

Fits: Some CC, DC, 400, 680, 700, 730, 800 series gas, LP, diesel 4-cyl., Replaces: A8086ABC2082 $129.25 ABC2082: 4" bore, (3) 0.093" compression


Fits: Some 400, 420, 680, 700, 730, 800 series gas, LP, diesel 4-cyl., Replaces: A40364ABC2090 $78.50 ABC2090: 4-1/8" bore, (3) 0.093" compression


Fits: Some R, RC 4-cyl.ABC2166 $82.15 ABC2166: 3-1/4" bore, (3) 0.125" compression


Fits: Some S, SC series 4-cyl.ABC2084 $107.15 ABC2084: 3-5/8" bore, (3) 0.093" compression


ABC2172 $126.50 ABC2172: 3-5/8" bore, (3) 0.125" compression rings, (1) 0.187" oil ring

Piston ring sets continue on next page

En

gin

e parts

Tips on ordering an engine piston ring set:

Measure old rings before ordering. Do not order by tractor model only. To ensure you order the correct rings, you will need the following information:

1 Bore size2 Thickness of each ring3 Quantity of each ring thickness per piston

Piston rings can not be returned if opened. Call or email for price and availability of other sizes.



https://www.steinertractor.com/ABC2511

















Cas

eE

ng

ine

par

ts

Sleeve sealing o-ringsNOTE: Includes (2) o-rings. Sold as pair for

one cylinder.


ABC2107 $3.50 Fits: VAC, 200B, 300B, 400B, 430, 470, 480, 530, 570, 580 gas, LP, Replaces: VT3375, G46909 (0.100" thick)

ABC2115 $8.95 Fits: 430, 470, 480, 530, 570, 580 series (All w/ 188 C.I. diesel engine); 630 gas, diesel, Replaces: G46888, A44003, 14461280 (0.100" thick) USA made

Engine gasket setsNOTE: Includes all gaskets and crankshaft seals for major

overhaul (unless otherwised noted).


CKS2390 $154.50

Fits: S, SC series, Replaces: 3598AA, A189555 USA made NOTE: Includes front crankshaft seal.

ABC1338 $154.00Fits: V, VC, VI, VO, Terra Trac Crawler (All w/ F124, F140, F162 flathead Continental gas engines), Replaces: F4U01007, F4U3004, F400500

CKS1321 $164.95

Fits: VA, VAC, VAH, VAI, VAO, VAS, Replaces: VTA814, VTA871

Engine overhaul kits:Inframe or out of frame kits are available by special order for VAC, 300 through 4694. For price and availability call, or visit Special Order Parts under Shop Online on our website.

Engine gasket sets cont...Order # Price Application

CKS1947 $189.95Fits: 310D - 350B, 420 - 480D, 530 - 586D, 630 (All w/ 188 C.I. diesel engine SN 2656844 & up & 207 C.I. engines), Replaces: A143000, A43198, A44758

Valve grind gasket setsNOTE: Includes all gaskets needed when replacing the cylinder

head (unless otherwised noted).


CKS2052 $113.15Fits: C, CC, D, DC series (All w/ 260 C.I. engine), Replaces: 4056AA, A189556USA made NOTE: Water inlet gasket not included.

CKS1671 $84.00

Fits: S, SC, SI, SOReplaces: 4057AA

CKS116 $74.95 Fits: VA, VAC, VAH, VAI, VAO, VAS Replaces: VT3312, VT3228, VT3379, VT3394, VT3246 NOTE: Includes all gaskets needed when replacing the cylinder head.

MHS071 $61.75 Fits: VC, Terra Trac Crawler (All w/ F124, F140, F162 Continental flathead gas engines), Replaces: C400K215, F400A335, F400E303, F124A201, X334 USA made

Piston ring sets - USA made (unless noted) cont...NOTE: Measure old rings before ordering.


Fits: Some V, VC w/ F124 Continental engineABC2110 $97.15 ABC2110: 3" bore, (3) 0.125" compression rings, (1) 0.187" oil ring

ABC2184 $120.65 ABC2184: 3" bore, (3) 0.125" compression rings, (1) 0.250" oil ring

ABC2162 $79.95 ABC2162: 3-3/16" bore, (3) 0.125" compression rings, (1) 0.187" oil ring

Fits: Some 200, 210B, 211B 4-cyl., Replaces: G1005, G1006ABC2112 $121.80 ABC2112: 3-1/8" bore, (3) 0.093" compression rings, (1) 0.250" oil ring

Fits: Some VAC, 300, 310, 320, 400B, 420B, 430, 470, 480, 1835 4-cyl. gas, LPReplaces: G1116 NOTE: On some engines discard 1 oil ring per cylinder.ABC2072 $147.95 ABC2072: 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings

Fits: Some Super 400, 700, 730, (800 diesel), 830 gas 4-cyl.ABC2150 $78.50 ABC2150: 4-1/4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring

Fits: Some 930, 931, diesel 6-cyl.ABC2152 $104.55 ABC2152: 4-1/4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring



















Case

Valve cover gasketsUSA made


CKS2595 $15.50 Fits: C, CC, D, DC seriesReplaces: O1594AB, O1594AB2, A26562

CKS2603 $16.95 Fits: S, SC series, Replaces: O5764ABCKS1689 $16.95 Fits: VA series, 200, 300, 400B, 430, 470,

480, 500B, 530, 580, 600B gas, LP Replaces: VT3246, A30009, A30263, A43021, G10267

CKS1697 $14.95 Fits: 320, 430, 470, 480, 530, 570, 580, 630 series (All w/ 188, 207 C.I. diesel engines), Replaces: G46866, A43030

Valve train kitFits: VA, VAC series (All w/ VT148 cylinder head) (Intake valve length: 4.971", head dia.: 1.330"; Exhaust valve length: 4.994", head dia.: 1.200"; Valve spring: 2.385")

Description Order # Price

Valve Train Kit .....................................................CKS3341 ..........$168.50NOTE: For valve train kits not listed please call.

PushrodFits: 430 - 630, W3 - 586D, 1835 - 1845 (All w/ 188, 207 C.I. diesel)Replaces: A51545, G47079(11.825" length)


NEW! Pushrod .....................................................CKS3539 ..........$24.75NOTE: See website for all applications.

Camshaft, partsOrder # Price Description / Application

CKS120 $167.50

Camshaft fits: 310D - 586D (All w/ 188, 207 C.I. diesel engines), Replaces: A2111, A36853, A39013, A153521

CKS123 $8.95EACH

Lifter fits: Same as CKS120Replaces: G47077

CKS2759 $32.95 3-pc. Camshaft Bearing / Bushing Set Fits: VAC - 580C gas, LP (All w/ 126, 148, 159, 164 C.I. engines)Replaces: A41225 USA madeNOTE: See website for full applications.

Camshaft, parts cont...Order # Price Description / Application

CKS2755 $29.95 5-pc. Camshaft Bearing / Bushing Set Fits the following tractors / backhoes: 320 diesel, 420 diesel, 420B, C diesel, 430 - 586D diesel, 630, 1740 diesel - 1845; Crawlers: 310E, F & G diesel, 350 diesel, 350B diesel, 450, 450B, 455B (All w/ 188 gas, diesel 201 gas, 207 diesel engines, gas will not use the rear bearing)Replaces: A151068, A41230, A41231 USA made NOTE: See website for full applications.

Crankshafts, partsNOTE: Bearings not included. Measure bearings before

ordering, no returns if package has been opened.


CKS064 $350.00 Crankshaft fits: 148 C.I. gas up to 1960, 200, 300, 310, 320 (All up to 1960Replaces: G11164, Casting G10071, G11700, G11701 (Rear main seal = 3.375" • Rod bearing dia. = 1.9365")NOTE: Will not fit tractors w/ block G1235. For bearings use CKS1964, ABC1962.

CKS2688 $599.00 Crankshaft fits: 310D - 310G, 350, 430, 480, 530, 580, 600B series (All w/ 148B, 159, 164 C.I. gas engines, 1960 & up)Replaces: A37210, G11183, G11708, G11709, 967731 (2.061" std. rod journals, 2.624" std. main journals) USA madeNOTE: New old stock. Splined rear flange.

CKS059 $650.00 Crankshaft fits: 188 C.I. diesel Crawlers: 310D, 310E, 310F, 310G, 350, 350B, 420C, 450; Tractors & Backhoes: 320, 430, 470, 480, 480B, 480C, 480D, 480LL, 530, 531, 570, 580, 580B, Forklifts: 440, 584, 584D, 585D, 586, 586D; Skid Steers: 1700, 1740, 1835, 1835B, 1845, 1845B, 1845S;Rollers: 752; Loaders: W3, W5A Replaces: A39146, A37211, A39151, A151015, G11189, G11740, G11741NOTE: For applications WITHOUT PTO, no splines in flange. For bearings use CKS1956, CKS1958.

CKS063 $650.00

Crankshaft fits: 207 C.I. diesel, 450B, 455B, 580C, 580D, 584C, 585C, 586C, W11, Replaces: A51917, A144011, 976321NOTE: No splines in flange. For bearings use CKS1958, CKS1960.

Crankshafts, parts continue on next page

En

gin

e parts

















Cas

eE

ng

ine

par

tsCrankshafts, parts cont...


ABC2831 $13.50Front Crankshaft Seal fits: S, SC seriesReplaces: O5727AB, 336342A1(1.125" I.D., 2.004" O.D., 0.250" wide)

ABC2364 $8.95 2-pc. Rear Crankshaft Seal fits: V, VC, Terra-Trac w/ F124, F140, F162 Continental engine, Replaces: D600B217(4-3/4" long) USA made NOTE: Graphite coated 'jute' yarn.

ABC1632 $12.95 Front Crankshaft Seal fits: V, VA, VI, VO, VC, 200, 300, 400B, 430, 500B, 530, 600B, 630 series (All w/ 124, 148, 159, 164, 188, 207 C.I. gas, diesel); Terra Trac Crawler gas w/ Continental engines when used as a front crankshaft seal Replaces: VT3373, A36609, A39110, A600L202 (2.125" I.D., 3.001" O.D., 0.434" wide)

ABC2056 $9.95Rear Crankshaft Seal fits: VAC, 200B, 300, 310, 320 (All up to 1960)Replaces: G10005, G13825(3.375" I.D., 4.381" O.D., 0.500" wide)

Crankshafts, parts cont...Order # Price Description / Application

ABC2841 $19.95 Rear Crankshaft Seal fits: 350, 430, 480, 500B, 530, 580, 600B, 630 gas, dieselReplaces: A51339 (4.000" I.D., 5.004" O.D., 0.500" wide) NOTE: See website for full applications.

ABC3212(Front)

$12.95

Crankshaft Seal fits: 400 - 4694ABC3212: Replaces: O9708AB, A62049, A157044 (2.625" I.D., 3.628" O.D., 0.433" wide)

ABC3215: Replaces: O9709AB, A62050(4.750" I.D., 5.756" O.D., 0.500" wide)

ABC3215(Rear)

$34.50

MHS010 $68.99 2-pc. Rear Main Seal fits: 1000, 1000C, 1000D Dozer w/ JD382 Continental engine w/ bolt-on style rear sealNOTE: Must drill & tap block & main cap for bolt on seal. Includes (2) half seals. Includes (2) half seals.

Crankshaft bearingsNOTE: Measure bearings before ordering, no returns if package has been opened.

Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.

Main bearings sold as engine set. See website for additional applications.

Order # Price Description Applications Replacement number(s)

The following fit VA, VAC series, 200B, 300, 300B, 310, 310C, 320, 320B, 420, 420B (All w/ connecting rod VT3200 or VT4538 & 124, 126, 148" gas engines up to 1960) (4 required for overhead valve engines)ABC1962 $18.50 Standard Connecting Rod Bearing (For 1.936" standard rod journal) USA made

NOTE: Fits CKS064 crankshaft.F600G312, G11141

ABC2522 $17.25 Connecting Rod Bearing (For 0.010" (1.926") undersize rod journal) USA made F600G312LLABC2526 $17.25 Connecting Rod Bearing (For 0.020" (1.916") undersize rod journal) USA made G11143The following fit VC series (For cylinders #1, 3)ABC1962 $18.50 Standard Connecting Rod Bearing (For 1.936" standard rod journal) USA made F600G312ABC2522 $17.25 Connecting Rod Bearing (For 0.010" (1.926") undersize rod journal) USA made F600G226LLABC2526 $17.25 Connecting Rod Bearing (For 0.020" (1.916") undersize rod journal) USA made F600G226NNThe following fit VC series (For cylinders #2 & 4)ABC2516 $18.50 Connecting Rod Bearing (For standard (1.936") rod journal) USA made F600G226ABC2518 $17.25 Connecting Rod Bearing (For 0.010" (1.926") undersize rod journal) USA made F600G226LLABC2520 $17.25 Connecting Rod Bearing (For 0.020" (1.916") undersize rod journal) USA made F600G226NNThe following fit the following models w/ 126, 148" engines: 200B, 210B, 211B, 300, 300B, 310, 310B, 310C, 311, 311B, 312, 320, 320B, 400B, 420, 420BCKS1964 $194.95 Standard Main Bearing Set (For standard 2.250" main journal)

NOTE: Includes thrust washers. Will fit CKS064 crankshaft.G11012, G11018, G11036




















Case

En

gin

e parts

Crankshaft bearings cont...

Order # Price Description Applications Replacement number(s)

The following fit 430, 470, 480, (480B,C,D), 530, 570, (580B,C), 630 (All w/ G148B using rod # G11176); G159, G188B, G188D gas, LP, diesel (1960 & up)CKS1956 $63.35 Standard Connecting Rod Bearing Set (set of 4) (For 2.062" standard rod journal)

USA made NOTE: Complete set for engine. Fits CKS059 crankshaft.A36500

CKS2528 $14.95 Connecting Rod Bearing (For 0.010" (2.052") undersize rod journal) USA made G37022, A36502, A46052

CKS2530 $16.95 Connecting Rod Bearing (For 0.020" (2.042") undersize rod journal) USA made G11984, A36503, A46053

The following fits 450B, 455B, 580C, 580D, 584C, 585C, 586C, W11 (All w/ G207 diesels)CKS1960 $49.95 Standard Connecting Rod Bearing Set (set of 4) (For 2.249" standard rod journal)

USA made NOTE: Complete set for engine. Fits CKS063. A50975, A51915

The following fit (310D, E, F, G), 320, 350, 350B, 420, 420B, 420C, 430, 450, 450B, 455B, 470, 480, (480,B,C,D), 530, 570, (580,B,C,D), (584,C,D), (585C,D), (586,C,D), 630, 1700, 1740, (1835,B), (1845,B), 660 Combine, 752 Roller, W3, W3A, W5, W5A (All w/ G188D, G207D diesel)CKS1958 $108.75 Main Bearing Set, 2.874" standard (Set of 5) (For 2.874" standard main journal)

USA made NOTE: Fits CKS059, CKS063 crankshafts.A36480, A36485, A36490, A36495

CKS2786 $108.75 Main Bearing Set (Set of 5) (For 2.864" (0.010") undersize main journal) USA made A36482, A36487, A36492, A36497

CKS2788 $108.75 Main Bearing Set (Set of 5) (For 0.020" (2.854") undersize main journal size) USA made A36483, A36488, A36493, A36498

Engine assy. & break-in lubeContains a special additive to cover the wear surfaces that help prevent scoring & galling during initial engine start up. Also contains corrosion inhibitors to help prevent rust & pitting of surfaces & zinc for older engine valve train protection. Use on bearings, camshafts, lifters, oil pumps, etc. (4 oz. bottle) USA made


Melling Engine Assembly & Break-In Lube .ABC3346 ..........$6.50NOTE: Not for use on cylinder wall or piston rings.

Oil capsOrder # Price Description / Application

IHS406 $38.95 Oil Fill Breather Cap w/ Clip & Copper Filter Element fits: VA series, 200, 300 series, 420B, 420 Crawler, 430, 500B, 530, 600B Loader: W3, W5, W5AReplaces: VT3545, A36608 (3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "OIL" stamped into top. Fits over 1-1/2" pipe.

Oil caps cont...Order # Price Description / Application

ACS178 $38.50 Oil Fill Breather Cap & Copper Filter Element fits: VA series, 200, 300 series, 420B, 420 Crawler, 430, 500B, 530, 600B; Loader: W3, W5, W5A Replaces: VT3545, A36608 (3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "OIL" stamped into top..

JDS500 $32.50Oil Fill Breather Cap w/ Clip & Copper Filter Element fits: Same as IHS406, ACS178, Replaces: VT3545, A36608(1-1/2" tall) USA made NOTE: Exact of original. E-coated black. "OIL" stamped into top. Fits over 1-1/2" pipe.

ABC042 $12.99

Oil Fill / Breather Cap w/ Clip & Filter Element fits: Same as IHS406, ACS178Replaces: VT3545, A36608 (1-1/2" tall)NOTE: Economy style.










https://www.steinertractor.com/IHS406

https://www.steinertractor.com/ACS178

https://www.steinertractor.com/JDS500



Cas

eOil pan drain plug, gaskets


ABC539 $7.95 Oil Pan Drain Plug fits: VA, VAH, VAI, VAO, 200B, 300B, 310, 320B, 420B, 430, 500B, (530 up to SN: 8262800 gas only), 600B, 630 gas, diesel, Replaces: VT4521(7/8" - 18 UNF) USA madeNOTE: White zinc finish.

ABC540 $2.99Washer / Gasket (For ABC539)Replaces: VT4520 (.875" I.D.) USA madeNOTE: Copper.

ABC1955 $1.75 Engine Oil Pan Drain Plug Gasket / Washer fits: 430 - 570 (All SN: 8262800 & up), some 480 - 1570, Replaces: A51759(0.750" I.D., 0.058" thick, 0.973" O.D.)NOTE: Made of nylon.

CKS1667 $14.00

Oil Pan Gasket fits: S, SC, SI, SOReplaces: A20630, O5743AB, O5744AB

ABC2429 $19.50Oil Pan Gasket Set fits: V, VC, Terra Trac Crawler (All using flathead engine)Replaces: F400B-401 USA made

CKS1847 $14.95Oil Pan Gasket fits: VA, VAC, VAH, VAI, VAO, VAE, VAS (All w/ 124 C.I. engine)Replaces: VT3245, A30440 USA made

CKS1853 $15.49 Oil Pan Gasket fits the following models w/ 126 & early 148 C.I. gas engines up to 1960 (All w/ standard clutch only): 200, 210, 211, 300, 310, 311, 312, 320, 350, 420, 420C, 500B, 510B, 511B , Replaces: G11010, G10020 USA made

CKS1850 $24.95 Oil Pan Gasket fits the following models w/ late G148B or 159 C.I. gas engine 1958 & up (All w/ standard clutch): 400B, 430, 440, 470, 480, 530, 540, 570, 580, 600BReplaces: A40710, G11826 USA made

CKS1845 $15.40 Oil Pan Gasket fits the following models w/ G188, G207 C.I. diesel engines: 430, 431, 440, 441, 470, 530, 531, 540, 541, 570, 630, 640, Replaces: A35299, A40712, A44758, A51891, A40713, G11951

Oil pump parts - USA madeOrder # Price Description / Application

ABC3339 $158.00

Oil Pump Repair Kit fits: V, VC (All w/ F124 Continental flathead engines)

Oil pump parts - USA made cont...


CKS3430 $12.50 NEW! Oil Pressure Regulating Valve Spring fits: VA, VAC, 200B, 300B, 350B, 400B, 420B, 500B, 600B, 630 series gas, LPReplaces: A29285 (1.937" o/a length, 0.445" O.D., 0.047" wire dia.) NOTE: Fits oil pump castings VT125, VT158, VTA3408.

CKS3435 $6.50 NEW! Oil Pump Cover Plate Gasket Fits: VA, VAC, 200B, 300B, 400B series gas, LP, Replaces: A30441 NOTE: Fits oil pump castings VT125, VT158, VT3408.

ABC3465 $3.75 NEW! Oil Pump Relief Valve Spring Fits: V, VC, 430, 470, 480, 480B, 530, 570, 580, 580B, 580C; Crawlers: 310D - 310F, 420B, 420C, 800, 1000 gas, LPReplaces: 30325, F400L-219, G48513(2.030" o/a length, 0.445" O.D., 0.058" wire dia.) USA made NOTE: The spring is on the right side of the block in flathead engines. The spring is in the oil pump in overhead valve engines.

CKS3475 $12.50 NEW! Oil Pump Relief Valve Spring Fits: 430, 470, 530, 570, 630; Industrials: 310D, 310E, 310F, 310G, 320, 350, 350B, 420C, 440, 450, 450B, 455, 480, 480B, 480C, 480D, 580, 580B, 580C, 580D, 1740, 1835, 1835B, 1845, 1845B, W3, W5, W5A, W11 (All w/ D188, D207 diesel engines)Replaces: G48500 (2.125" o/a length, 0.455" O.D., 0.075" wire dia.)

Oil filters - USA madeOrder # Price Application

ABC521 $16.35

Fits: D, DC, S, SC, LA, V, VCReplaces: O8926AB, 8152AB, VT2427(4-1/4" L x 3-1/2" W)

ABC006 $19.99 Fits: VA series, 200, 300, 301, 310, 311, 350D; 400B, 500B, 600B series w/ Case engine (All w/ spin on-style filters)Replaces: VT3589, A36136(4-5/8" tall) NOTE: Threaded neck type.

ABC007 $9.85 Fits: Late 310 (11/1959 & up), 310 diesel, 420C, 430, 470, 480, 530, 570, 580, 630 gas, diesel; 680, 770, 870, 970 (All w/ spin on-style filters), Replaces: A37189, G45210(5-1/4" tall, 3.675" O.D.) NOTE: Spin on top.

ABC047 $15.65Fits: 680, 730, 750 Dozer, 830, 850 (All w/ cartridge filters) Replaces: A21475 (4-3/4" tall, 3-15/16" wide) USA made

En

gin

e p

arts




















Case

Flywheel ring gears


ABC478 $78.50 Fits: VC, Terra Trac Crawler (All w/ F124, F140, F162 flathead Continental engines) Replaces: 155C309, Continental C400C305(12-1/8" I.D., 13-1/8" O.D.) NOTE: 103 teeth.

CKS1935 $89.95 Fits: D, DC series, S, SC seriesReplaces: O5565AB(12.972" I.D., 14.164" O.D.)NOTE: 112 teeth.

Original style muffler clamps


ABC327 $9.95 Fits: V, VA, VAC, VC gas, 200B, 300B, 310, 350, 400B, 500B, 600BReplaces: VT3864 (2") NOTE: Chrome. Fits pipe O.D. of 1.850" - 2.000" range. Will fit CKS106 muffler.

ABC2519 $14.95 Fits: Same as ABC327Replaces: VT3864 (2")NOTE: Stainless steel.

ABC2625 $8.70 Fits: Same as ABC327Replaces: VT3864 (2")NOTE: Painted steel.

ABC351 $10.50 Fits: 530, 540, 570, 630, 640, 730, 830 (2-1/2") NOTE: Chrome. Fits pipe O.D. of 2.350" - 2.550" range. Will fit CKS1773, CKS1777 mufflers.

ABC2521 $16.95 Fits: Same as ABC351 (2-1/2")NOTE: Stainless steel.

ABC2627 $8.50 Fits: Same as ABC351 (2-1/2)NOTE: Painted steel.

Economy muffler clamps USA made

Order # Price Dimension

ABC568 $2.99 (1-1/2" clamp)ABC570 $2.95 (1-5/8" clamp)ABC572 $2.95 (1-3/4" clamp)ABC574 $3.25 (1-7/8" clamp)ABC576 $3.25 (2" clamp) NOTE: Use w/ CKS106

muffler.

Economy muffler clamps - USA made cont...

Order # Price Dimension

ABC578 $3.25 (2-1/4" clamp) NOTE: Use w/ CKS109, CKS128 mufflers.

ABC580 $3.25 (2-1/2" clamp) NOTE: Use w/ CKS109, CKS1773 mufflers.

ABC583 $4.95 (2-3/4" clamp)ABC585 $4.95 (3" clamp)ABC2234 $4.95 (3-1/2" clamp)ABC1771 $8.75 (4" clamp)

Mufflers - USA madeOrder # Price Application

CKS109 $40.50Fits: C, CC, D, DC, DI, DC-4, 400 gas, diesel, 700, 800 gas, dieselReplaces: A9215, A11871, A20494NOTE: Dark silver finish.

CKS109 dimensions: Inlet length: 3", Inlet I.D.: 2-1/4", Shell length: 17", Shell diameter: 4-1/4", Outlet length: 6", Outlet O.D.: 2-1/4", Overall length: 26"; If raincap is needed order RCS006. If clamp is needed order ABC578.

CKS106 $35.95 Fits: V, VA, VAC, VC gas, 200B, 300B, 310, 350, 400B, 500B, 600BReplaces: G45727, VTA1135, VTA2811NOTE: Dark silver finish.CKS106 dimensions: Inlet length: 2-3/4", Inlet I.D.: 1-15/16", Shell length: 16-3/4", Shell diameter: 3-1/4", Outlet length: 9-1/2", Outlet O.D.: 2", Overall length: 29"; If raincap is needed order RCS005. If clamp is needed order ABC576 or ABC327.

CKS128 $34.95Fits: S, SC, SI, Replaces: O6417ABNOTE: Silver finish.

CKS128 dimensions: Inlet length: 2-1/2", Inlet I.D.: 2-3/16", Shell length: 16-1/2", Outlet Length: 7", Outlet O.D.: 2-1/4", Overall Length: 26", If raincap is needed order RCS006. If clamp is needed order ABC578.

CKS1773 $38.40 Fits: 530, 531, 540, 541, 570, 580, 630, 640, 641, W3 Industrial gas, dieselReplaces: G45239, A39022NOTE: Dark silver finish.CKS1773 dimensions: Inlet length: 7-1/2", Inlet I.D.: 2-1/2", Shell length: 17", Outlet length: 4-1/2", Outlet O.D.: 2-1/2", Overall length: 29"; If raincap is needed order RCS007. If clamp is needed order ABC351 or ABC580.

Mufflers continue on next page

En

gin

e parts


























Cas

eE

ng

ine

par

tsEconomy raincaps

Order # Price Fits the following pipe O.D.:

RCS002 $9.65 (1-1/4" - 1-7/16" O.D.) NOTE: Painted.RCS003 $9.80 (1-1/2" - 1-11/16" O.D.) NOTE: Painted.RCS004 $9.95 (1-3/4" - 1-15/16" O.D.) NOTE: Painted.RCS005 $10.35 (2" - 2-3/16" O.D.) NOTE: Painted.RCS006 $10.75 (2-1/4" - 2-7/16" O.D.) NOTE: Painted.RCS007 $11.29 (2-1/2" - 2-11/16" O.D.) NOTE: Painted.RCS008 $9.29 (2-3/4" - 2-15/16" O.D.) NOTE: Painted.RCS009 $13.75 (3" - 3-3/16" O.D.) NOTE: Painted.

Choke partsOrder # Price Application

ABC423 $9.95 Universal Choke Cable fits: Tractors, Forklifts & other applications using 72" or less cable (72" long) NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines.

ABC3210 $16.50 Universal Engine Stop Cable (Diesel Fuel Shut Off) fits: Tractors, Forklifts & other applications using 96" or less cableNOTE: Nylon sheathed. Cut to length.

JDS718 $20.85 Universal Choke Cable fits: Tractors, Forklifts & other applications using 47" or less cable (47" long) NOTE: Metal sheathed w/ "CHOKE" on plastic knob. Cut to length.

ABC2426 $4.95 Choke or Fuel Shut Off Cable Clip (For Marvel Schebler carburetors)Fits: VC, VAC - 830; Also works for diesel fuel cable shut off for 770 - 4890Replaces: B51765 NOTE: See website for a complete listing of applications & carburetor numbers.

Carburetors, partsCan't find your carburetor number? Look on page 352A.

Carburetors are limited to replacement only - NO refunds.

No replacement will be given if dirt, rust, etc. is found in the

carburetor or if it has been taken apart.


ABC223 $416.00 Carburetor New, Zenith Replacement Fits: SC, SI, SO, V series, VA series, 200, 300, Replaces: TSX 42, 43, 74, 114, 212, 253, 474, 513, 635, 668, 9667 (2-5/16" c.c. stud holes) USA made NOTE: Has 1-1/8" throttle bore. May have to trim throttle shaft on some applications. Will fit 2-5/16" - 2-3/8" c.c. stud holes because of the smaller dia. studs that are included.

Mufflers - USA made cont...Order # Price Application

CKS2243 $62.50 Fits: 480B - 480D, 580B - 580D, 584C - 586D gas, diesel, Replaces: A39561NOTE: Black finish.

CKS2243 dimensions: Inlet length: 5-1/2", Inlet I.D.: 2-1/2", Shell length: 19", Outlet length: 8-1/2", Outlet O.D.: 2", Overall length: 33"

CKS1777 $38.50 Fits: 730, 731, 741, 830, 831, 840, 841 gas, diesel, Replaces: A24314, A23476, A21464NOTE: Dark silver finish.CKS1777 dimensions: Inlet length: 7-1/2", Inlet I.D.: 2-1/2", Shell length: 17", Outlet length: 4-1/2", Outlet O.D.: 2-1/2", Overall length: 29"; If raincap is needed order RCS007. If clamp is needed order ABC351 or ABC580.

CKS1783 $46.25 Fits: 930, 931, 940, 941, 1030, 1031; Industrials: W8B, W8E, W9B, W9C, W9E, W10B, W10C, W10E gas, dieselReplaces: T42286, A24103, A27105NOTE: Dark silver finish.CKS1783 dimensions: Inlet length: 3", Inlet I.D.: 2-3/4", Shell length: 17", Outlet length: 12", Outlet O.D.: 2-3/4", Overall length: 32"; If clamp is needed order ABC583.

Restoration quality raincapsNOTE: Measure outlet dia. before ordering.

Order # Price Fits the following pipe O.D.:

ABC3158 $12.50NEW! Fits: Mufflers & exhaust pipes w/ 1.500" - 1.600" O.D. rangeNOTE: Steel w/ high temperature paint.

ABC3240 $31.80 NEW! Fits: Mufflers & exhaust pipes w/ 1.500" - 1.600" O.D. rangeNOTE: Stainless steel.

RCS014 $34.80 (2-1/2" O.D.) USA made NOTE: Chrome plated.

RCS015 $41.95 (3" O.D.) USA madeNOTE: Chrome plated.

RCS016 $45.95 (3-1/2" O.D.) USA madeNOTE: Chrome plated.

For additional restoration quality raincaps see page 247

https://www.steinertractor.com/RCS002






















Case

Carburetors, parts cont...Order # Price Description / Application

ABC3453 $432.25 NEW! Carburetor (New, not Rebuilt) Fits: 500B, 511B, 530, 570, 580, 580B, 580C, 600B, 611B, 630, Replaces: A37173, Marvel Schebler TSX 798, 854 Zenith; 11622, 12255, 12509, 12534, 12913, 13048, 13106, 13107, 13108, 13109, 13328, 13348, 13612, 13783 (2-11/16" c.c. mounting studs, 1.299" throttle bore, 2.040" housing O.D. for air cleaner hose) USA madeNOTE: May look different from the original.

IHS377 $498.50 Carburetor (Down Draft) fits: David Brown 885, Replaces: 341VN USA madeNOTE: Looks different, works great! If carburetor gasket is needed order ABC416.

ABC297 $7.75 Carburetor Fuel Inlet Elbow & Strainer Assy. fits: Case models (Male end (screen end) - 1/8" pipe thread; female end - 1/4" flare) NOTE: Must have internal threads. Used w/ flair fitting NOT compression fitting.

ABC564 $26.40 Main Jet Adjustment Needle Assembly (For Zenith carburetors) fits: C, D series (All w/ carb 08964, A, B); R series w/ carb 10136; S series w/ carb 09667AReplaces: Zenith 71-21 (3/8"-24 thread)USA made NOTE: Also fits 570, 580, 580B, 1845 to eliminate electric solenoid.

ABC557 $29.95Main Carburetor Nozzle (For Zenith carburetors) fits: R, RC, RI (All w/ carb 10136, 10146), Replaces: Zenith C66-47-50 USA made

ABC230 $6.45 VITON Needle Float Valve (For Marvel Schebler carburetors) fits: V, VA, VAC, 200, 300, 400B, 600B (All w/ TSX 43, 114, 253, 474, 597, 635, 663, 680, 696, 749, 804, 936), Replaces: Marvel Schebler 233-536(.080 orifice) USA made NOTE: Viton needle & seat helps stop carb flooding.

ABC133 $6.15 VITON Needle Float Valve (For Marvel Schebler carburetors) fits: D w/ TSX11, 400, 540, 630, 700, 730, 800, 830 (All w/ TSX 616, 780, 782, 785, 794, 798, 799) Replaces: Marvel Schebler 233-543, 233-595 (0.100" orifice) USA made NOTE: Viton needle & seat helps stop carburetor flooding.

ABC513 $2.55 Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetors)Fits: V - 480 series (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size.

Carburetors, parts cont...Order # Price Description / Application

ABC424 $1.39 Manifold to Carburetor Gasket fits: C, CC, D, DC, 400, 530, 570, 580, 611B, 630, 700, 800 series, Replaces: O889AB1, G46826, 1349074C1 (2-11/16" c.c. bolt holes, 1 1/2" center hole)NOTE: Perforated steel core.

ABC408 $1.39 Manifold to Carburetor Gasket fits: S series, VC, VAC, 200, 300, 310, 320, 430Replaces: O562AB (2-3/8" - 2-7/16" slotted bolt holes, 1-1/8" center hole)USA made

ABC3233 $3.50 Carburetor Gasket Kit (For small bowl Marvel Schebler carburetors) fits: V series w/ TSX 42, 43, 74; VA series w/ TSX 114, 212, 225, 253, 597, 663; 200B, 311B both w/ TSX 635; 310, 320 both w/ TSX 710; 310B w/ TSX 635, 804, 937, 937SL, 957SL; 312B w/ TSX 635, 680; 440 w/ TSX 936, 936SL; Power Units w/ TSX225, 409, 474, 762Replaces: A43594 (4-5/16" o/a length bowl gasket) USA made

ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl Marvel Scheblers) fits: Some 530 - 630 series (All w/ TSX 798, 799)Replaces: B51729 (5" bowl gasket length)USA made NOTE: Fits same carb numbers as FDS212 economy kit.

Carburetor floatsOrder # Price Application

IHS575 $78.50

(For K6A Zenith carburetors) fits: L, LA, LI (All w/ carb 6799, 8714)

ABC036 $12.60 (For small bowl Marvel Schebler carburetors) fits: V, VA series both w/ TSX 225; VAC w/ TSX 513; 200, 300 series; 310 w/ TSX 957; 430, 440, 440B, 480 (All w/ TSX 42, 43, 74, 114, 212, 225, 253, 597, 633, 635, 680, 936); 500B, 600B, Power Units (All w/ TSX 338, 409, 474, 597, 663, 696, 710, 762, 804, 936SL, 937, 937SL, 939SL)Replaces: B51772, Marvel Schebler 30-600

ABC361 $29.50 (For Marvel Schebler carburetors)Fits: 400, 410B, 500B, 511B, 540B, 600B, 700, 730, 740, 840 (All w/ TSX 616, 749, 780, 782, 785, 794, 840, 863); Industrials: W5, W7, W7C, W9A, 680CK; Power Units w/ TSX 11, 717, Replaces: B51773, Marvel Schebler 30-621

Carburetor floats continue on next page

En

gin

e parts


















Cas

eCarburetor floats cont...


ABC037 $19.95

(For Marvel Schebler carburetors)Fits: 540, 541, 600, 640, 641 (All w/ TSX 798, 799, 854), Replaces: B51776, Marvel Schebler 30-631, 30-739, C85-156

ABC454 $35.75(For Zenith carburetors) fits: C, CC, D, DC series, 400, 500B, 510B, 511B, 600, 600B (All w/ carb 8964, A, B, 12255, A, 12329A, 13902), Replaces: C85-26

ABC190 $15.95(For Zenith carburetors) fits: RC, S, SC, SI, Power Unit (All w/ carb 9667); VAC w/ carb S1162, 10136, 10146, 11106, 11506, 11699, 12522, Replaces: Zenith C85-28

ABC452 $23.60 (For Zenith carburetors) fits: SC, 300B, 400B, 430, 470, 480, 480B, 500, 500B, 530, 570, 580, 580B, 600, 600B, 630, 770, 870; Industrials: W5, W5A, W7E; Skid Steer: 1845 (All w/ carb 12509, 12534, 12675, 12913, 13106, 13109, 13328, 13338, 13374, 13390, 13612); Power Units w/ carb 11535, A, 13048, 13107, 13108, 13348, 13783Replaces: B51359, Zenith C85-115

ABC1355 $22.80(For Zenith 63-11, 63-12, 69 series carburetors) fits: 870 w/ carb 13598, 930 w/ carb 12978, 970 w/ carb 13478Replaces: Zenith C85-40

Carburetor repair kitsCan't find your carburetor number? Look on page 352A.

Economy carburetor repair kits include needle & seat, float

lever pin, seal, gaskets & instructions.

Basic carburetor repair kits include throttle shaft, needle &

seat, float lever pin, seal, gaskets & instructions.

Premium carburetor repair kits include throttle shaft, throttle

plate, choke shaft, choke plate, throttle shaft bushings and

packing, metering nozzle, brass plugs, float pin, needle & seat,

drain petcock, gaskets, fuel strainer & more.


Economy carburetor repair kits - USA made

ABC222 $24.95

Economy Carburetor Repair Kit (For Zenith carburetors) fits: C, CC both w/ carb 7124, 8672

Carburetor repair kits cont...Order # Price Description / Application

Economy carburetor repair kits - USA made cont...

ABC1348 $24.95 Economy Carburetor Repair Kit (For Zenith carburetors) fits: C, CC, D, DC (All w/ carb 8964, 8964A, 8964B); 400B w/ carb 12329, 12329A; 500B, 600B both w/ carb 12255, 12255A, 12255CReplaces: G45162, G45719

ABC1346 $25.70 Economy Carburetor Repair Kit (For Zenith carburetors) fits: R, S, VA, 300 series (All w/ carb 9667, 9667A, 10136, 11106, 11106A, 11506, 13902) NOTE: Fits 61, 68, 161 series Zenith carbs.

ABC1349 $24.95 Economy Carburetor Repair Kit (For Zenith carburetors) fits: SC, 300, 400B, 500B, 530, 770, 870 (All w/ carb 11535, 12509, 12534, 13106, 13107, 13109, 13328, 13374, 13608), Replaces: Zenith K2048, K2049, K2050, K2136

ABC220 $22.50 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: V series w/ TSX 42, 43, 74; VA series w/ TSX 114, 212, 225, 253, 597, 663; 200B, 311B both w/ TSX 635; 310, 320 both w/ TSX 710; 310B w/ TSX 635, 804, 937, 937SL, 957SL; 312B w/ TSX 635, 680; 440 w/ TSX 936, 936SL; Power Units w/ TSX 225, 409, 474, 762

ABC552 $21.95 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 400, 700 both w/ TSX 616; 410B, 511B both w/ TSX 749, 780; 420C w/ TSX 804; 730, 830 both w/ TSX 782, 785, 794, 863; D series w/ TSX 616; DC w/ TSX11; Power Units w/ TSX591, 717

FDS212 $22.25

Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 530, 540 both w/ TSX 799; 600B, 640 both w/ TSX 798

ABC340 $38.75Economy Carburetor Repair Kit (For Zenith carburetors) fits: 500B, 510B, 511B, 530, 600B (All w/ carb 12255)NOTE: Includes throttle shaft, but shaft will not fit these applications.

Basic carburetor repair kits

ABC477 $42.95

Basic Carburetor Repair Kit (For Zenith carburetors) fits: C, CC, D, DC, DI, DO (All w/ carb 8964)

En

gin

e p

arts












https://www.steinertractor.com/FDS212




Case

Carburetor repair kits cont...Order # Price Description / Application

Basic carburetor repair kits cont...

CKS1390 $36.95 Basic Carburetor Repair Kit (For Zenith K6A carburetors) fits: L series SN: 301843 & up, LA series (All w/ carb 6799, 8714), Replaces: O.E.M carb 01709AB2, 04669AB

ABC479 $49.99

Basic Carburetor Repair Kit (For Zenith carburetors) fits: S, SC, SI, SO (All w/ carb 9667)

ABC473 $38.75Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: V, VA, VAC, VAI, VAO (All w/ TSX 114)

CKS1383 $38.95Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: V, VC, VI, VO (All w/ TSX 42, 43, 74)

Premium carburetor repair kits

CKS3577 $58.95

NEW! Premium Carburetor Repair Kit (For Marvel Schebler carburetors)Fits: VA, VAC series w/ TSX 114, TSX253

CKS3575 $58.95

NEW! Premium Carburetor Repair Kit (For Marvel Schebler carburetor)Fits: VA, VAC series w/ TSX 597

CKS3580 $57.20NEW! Premium Carburetor Repair Kit (For Marvel Schebler carburetor)Fits: 200B, 300B series w/ TSX 635NOTE: Must reuse old choke shaft.

Radiator, partsOrder # Price Description / Application

CKS086 $368.75

Radiator fits: VA, VAC, VAH, VAI, VAO, VAS Replaces: VTA2688

Radiator, parts cont...Order # Price Description / Application

CKS3142 $263.50 Radiator Core fits: C, CC, D, DC seriesReplaces: O7093AB, O10870A(20-1/2" tall x 15" wide x 2-3/8" thick)USA made NOTE: Does not include gaskets.

CKS3134 $22.50

Radiator Core Gasket Pair fits: C, CC, D, DC, RC, Replaces: O687AB USA made

ABC455 $2.95Radiator Mounting Pad fits: Case models(2" x 2", 1/4" thick) NOTE: 2 used per tractor; Sold individually.

FDS258 $3.60

Clamp (For 1-3/4" to 2" O.D. hose) Fits: Case models

ABC209 $3.50 Radiator Drain Plug fits: 310G - 4690Replaces: 217-103 (1/4"-18 NPT)USA made NOTE: See website for full applications.

Radiator capsOrder # Price Description / Application

CKS079 $37.45

Radiator Cap (Cast) w/ Gasket Fits: S, SC, SO, SI, Replaces: 2621AA(2.667" tang to tang)

ABC3308 $6.95 Radiator Cap Gasket fits: S, SC, SOReplaces: O5807AB, A26931(3" O.D., 2-1/4" I.D., 1/8" thickness)USA made

MHS043 $9.95Radiator Cap (Vented) w/ MHS043GK Gasket fits: V, VAC, VAH, VAI, VAO, VC, VI, VO (2-7/8" O.D.) NOTE: Zinc finish.

MHS043GK $1.50Gasket only (For MHS043)(2.622" O.D., 1.500" I.D., 0.100" thick)USA made NOTE: Rubberized cork gasket.

MHS045 $13.50 Radiator Cap w/ Gasket (For Non-Pressurized system) Fits: V, VA, VAC, VAH, VAI, VAO, VC, Replaces: G13271(1.761" tang length)

Radiator caps continue on next page

Underside view

En

gin

e/Coolin

g p

arts

Underside view





















Cas

eC

ooli

ng

par

tsWater pumps, partsNOTE: New, no core charge.


CKS091 $196.95

Water Pump fits: D, DC, DI, DO, DVReplaces: B160AA, 2883AA, 5577A (water pump body); A28456 (pump assy)

ABC2008 $12.50

NEW! Water Pump Seal fits: D, DCReplaces: A26777(1.375" I.D., 2.110" O.D., 0.315" wide)

CKS097 $168.95

Water Pump fits: S, SC, SI, SOReplaces: A48361

CKS108 $69.50 Water Pump fits: Some VA; VAC, VAH, VAI, VAO, VAS w/ engine SN: 4700000 & up; 200; Some 200B; 210, 210B, 300, 300B, 310, 310B, 310D, 310F, 311, 311B, 312, 312B, 320, 350, 351, 400, 400B, 430, 430CK, 440, 441, (Early 480 w/ engine SN: 2684784), 500, 500B, 530, 540, 540C, 541, (Early 580 w/ engine SN: 2684784), 600, 600B, 610, 611B, 630 (All gas w/ 2-3/4" impeller dia. & casting VT327, VT341, A28860), Replaces: A148401, A48362, G11956, VTA908 NOTE: Will not fit Early VAC series w/ threaded impeller shaft. 2-3/4" impeller diameter. Measure impeller before ordering.

CKS118 $67.95 Water Pump fits: 430, 470, (Late 480 w/ engine SN: 2684784), 530, 570, (580 w/ engine SN: 2684784), 630; Industrials: 310E, 310F, 310G, 350, 350B, 420C, 450, 450B, 480, 480B, 480C, 480D, 480LL, 580, 580B, 580C, 580D, 584, 584C, 584D, 585, 585C, 585D, 586C, 586D, 600, 660, 1835 Skid Steer, 1845, 1845S, W3, W5A (All w/ Late 148B & 159 gas engines & 188, 207 C.I. diesel engines), Replaces: A37758, A39074, A48363, A146584, G2015, G11939(3.125" O.D. impeller) NOTE: For gas engines measure impeller before ordering.

MFS2123 $2.25

Water Pump to Support Casting GasketFits: Same as CKS108, CKS118Replaces: G46875 USA made

Radiator caps cont...Order # Price Description / Application

ABC008(4 PSI)

$8.75

Radiator Cap w/ Gasket (For Pressurized systems) (For radiators w/ 1" tall filler neck) Fits: 200B, 300 gas, diesel, 300B, 320B, 380CK, 400B, 420B, 430, 470, 480, 500B, 530, 570, 580, 600B, 630; David Brown: 770, 780, 880, 885, 990, 995, 996, 1200, 1210, 1212Replaces: G45179, K906196, K945363(1.500" radiator neck I.D., 2.330" O.D., 2.000" tang to tang)

ABC1396(7 PSI)

$8.95

ACS209 $16.50 Radiator Cap w/ Gasket (For (4 PSI) Pressurized systems) Serviceable for 200B, 300B, 400B, 500B, 600B (All w/ SN: 6120001 & up), 430, 470, 480, 480B, 530, 570, 580, 580B, 630, Replaces: A39359, A45176, G45179 (2.895" outer shell O.D.)

ABC1398 $5.95 Radiator Cap w/ Gasket(For (7 PSI) Pressurized systems)Fits: 885 - 1694, Replaces: K945362, E81942 (2.330" O.D., 2.000" tang to tang, 1.096" tall) NOTE: Fits radiators w/ 3/4" tall filler neck.

ThermostatsOrder # Price Application

IHS913 $37.50Fits the following when a 160 degree thermostat is desired: C, CC, CI, CO, D, DC, DI, DH, DO, Replaces: O3785AB, O8989AB (160 degree Temp) NOTE: Pointed end goes down.

ABC1086 $12.50

Fits: C, D, L series, Replaces: O8989AB(180 degree Temp, 2-1/2" O.D.)USA made

ABC1898 $19.95Fits: 400 - 425 series, 700, 730, 800, 830, 900 series, Replaces: A28114, Serviceable for A11493 (160 degree Temp)USA made NOTE: Gasket not available from STP.

ABC052 $11.50 Fits: Some 430 diesel - 4690 & David Brown 1190 - 1694, Replaces: A57641, K208039 (160 degree Lo-Temp) USA made NOTE: Gasket included fits Ford models only.

Underside view

Underside view

Underside view






https://www.steinertractor.com/MFS2123










Case

Fan beltsNOTE: Verify belt size before ordering.


ABC1648 $15.50 Fits: Case/IH STX275, STX325, JX80U, JX90U, JX100U, MX240, 9170, 9180, 9270, 9280, 9370, 9380, other various applications, Replaces: A189040, AV10X1175, 3030103(17/32" x 45-1/4")

ABC402 $17.75 Fits: R, RC both w/ Waukesha FC9G engine; V, VC, VAC, VAI, VAO(All w/out generator)Replaces: O3782AB(13/16" wide x 40-1/2" long)

Amp gauges w/ stainless steel bezelNOTE: CKS Gauge has a metal base, glass lens & stainless steel

bezel. Includes "CASE" name.

ABC Gauges have a chrome bezel & vary from original

appearance. Does not include "CASE" name. For 2" diameter

hole.


CKS076 $18.95(20-0-20) fits: C, D, L, R, S, V, VA series; Also fits newer Case models w/out gauge cluster, Replaces: O3601ABNOTE: Like original w/ Case logo.

ABC016 $12.75

(20-0-20) fits: C, D, L, R, S, V, VA series(Terminal type) USA madeNOTE: No logo.

ABC109 $12.75 (30-0-30) fits: C, D, L, R, S, V, VA series, 420, 425, 500, 600, 1000, W9 Industrials; Also fits newer Case models w/out gauge cluster (Terminal type) USA madeNOTE: No logo.

ABC466 $14.95(60-0-60) fits: CC - VAC, 200B - 400 w/ Alternator system (Terminal type) USA madeNOTE: No logo.

Electric oil pressure switchesOrder # Price Description / Application

ABC1486 $6.30Electric Oil Pressure Sensor Switch Fits: Case/IH MXM120 - MXM190, MXU110 - MXU135 (All w/ analog gauges), Replaces: 83934153

Electric oil pressure switches cont...Order # Price Description / Application

ABC1605 $18.25 Electric Oil / Fuel Pressure Sensor SwitchFits: Late 430, 530, 730, 830, 930, 1030; Industrials: 470 - 780Replaces: A13794

Oil pressure gauges w/ stainless steel bezel, partsNOTE: CKS Gauges have a metal base, glass lens & stainless

steel bezel. Includes "CASE" name.

ABC Gauges have a stainless steel bezel & vary from original


hole.

When ordering a dash mounted oil pressure gauge you will

also need to order (1) of the following fittings depending on

the line size to adapt your existing line to the gauge: ABC538,

IHS626, ABC2353, ABC2360.


CKS1642 $29.95 (0-30 PSI) fits: VA, VAC, VAH, VAI, VAO, V, VC, VI, VO, 200B, 430 gas up to SN: 8262799, Replaces: VT-2249(1/8" NPT male thread)NOTE: Dash mount; Has Case logo. Line adapter sold separately.

ABC082 $20.90(50 PSI) fits: 200B, C, D, L, R, S, V, VA series (1/8" NPT male thread)NOTE: Dash mounted. No logo.Line adapter sold separately.

CKS075 $24.50 (0-60 PSI) fits: C, D, L, R, S, 400, 500, 600; Also fits newer Case models w/out gauge cluster, Replaces: O4370AB, A31169 (1/8" NPT male thread)NOTE: Dash mount; Has Case logo. Line adapter sold separately.

ABC005 $19.95(80 PSI) fits: CC - 600 series(1/8" NPT male thread)NOTE: Dash mounted. No logo. Line adapter sold separately.

ABC523 $23.99 Oil Gauge Copper Line Kit (For tractors using 1/8" x 6' copper oil line)(6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor)NOTE: Use w/ ABC538 fitting.

ABC2360 $3.95 Oil Gauge Adapter Fitting fits: Some CC, DC, L, LA, R, RC, SC, VA, VAC series(1/8" pipe female to 3/16" tubing female) NOTE: Brass.

Oil pressure gauges, parts continue on next page

Coolin

g p

arts / Gau

ges

















Cas

eG

auge

sOil pressure gauges w/ stainless steel bezel, parts cont...


ABC2353 $3.95 Oil Gauge Adapter Fitting fits: Some V, VC, VI, VO, 400, 500, 600(1/8" pipe female to 1/4" tubing female)NOTE: Brass.

ABC538 $13.95 Oil Gauge Fitting (For gauges w/out removable fitting) (1/8" pipe thread to 1/8" compression) USA madeNOTE: Brass. Use w/ ABC523 line kit.

IHS626 $12.85 Oil Gauge Fitting (For gauges w/out removable fitting) (1/8" pipe thread to 1/4" compression) USA madeNOTE: Brass.

Water temperature gauges w/ stainless steel bezelNOTE: CKS Gauges have a metal base, glass lens & stainless

steel bezel. Includes "CASE" name.

ABC Gauges have a stainless steel bezel & vary from original


hole.


CKS077 $29.50Fits: Some C, D, S, V, VA series; Also fits newer Case models w/out gauge clusterReplaces: VT-2265 (60" lead w/ 5/8" - 18 UNF w/ 1/2" NPT pipe bushing)NOTE: Check length before ordering. Has Case logo.

CKS122 $29.50

Fits: LA, 400, 420, 425, 500, 600Replaces: O6161AB, O9991AB, O10416AB(84" lead) NOTE: Check length before ordering. Has Case logo.

ABC239 $27.25

Fits: CC - VAC, 200B - 400(110 degree - 230 degree temperature range, 90 degree pointer sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe bushing)NOTE: Dash mounted; No logo.

ABC1593 $29.95

Fits: CC - VAC, 200B - 400(60" lead, 5/8-18 UNF w/ 1/2" pipe bushing) NOTE: Dash mounted;No logo.

Tachometer partsOrder # Price Description / Application

ACS2803 $46.50Tachometer Drive Assembly fits: Some 430, 470, 480, 530, 570, 580, 630, W3, W5A series, Replaces: A36818, G45274NOTE: For generator driven tach cable. 12 & 45 tooth gears. Count teeth before ordering.

ACS2805 $24.95

Tachometer Driven Gear & Shaft Fits: Same as ACS2803, Replaces: A36522 NOTE: For generator driven tach drive. 45 teeth. Count teeth before ordering.

ACS2809 $14.95

Tachometer Drive Gear fits: Same as ACS2803, Replaces: G46306 NOTE: For generator driven tach cable. 12 teeth. Count teeth before ordering.

ABC476 $46.50Tachometer Drive Assembly fits: Some 430, 480, 530, 580, 630, W3, W5A gas, diesel NOTE: Driven off the generator. count teeth before ordering, 14 & 43 tooth gears.

ABC1822 $8.95

2-pc. Tachometer Drive Gasket Kit Fits: Same as ACS2803Replaces: G46882, G46878 USA made NOTE: Close out.

MFS133 $19.30Tachometer Cable w/ Metal Sheath Serviceable for 200B, 300B, 350, 400B, 500B, 600B, Replaces: G13022, G13023, G45393 (38-7/8" long, square ends)NOTE: Limited supply, replacing w/ nylon sheath.

FDS423 $16.75 Tachometer / Speedometer Cable w/ Metal Sheath fits: 430, 470, (530 SN: 8297801 & up), 570 gas; Also fits the following as a speedometer cable: 530 up to SN: 8262800, 630 gas, dieselReplaces: G45230 (48" long, square ends)NOTE: Limited supply, replacing w/ nylon sheath.

IHS697 $28.95

Tachometer Cable w/ Metal Sheath Fits: 4690, Replaces: A135494(61-1/4" long w/ square ends)

















Case

Electrical outlet socket, partsOrder # Price Description / Application

ABC395 $25.75Electrical Outlet Socket (For implements w/ lights) fits: Case modelsNOTE: 2 plated brass pins.

ABC1868 $21.10 Connector Plug (For ABC395)Replaces: B50259 (3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins. Wires must be soldered or crimped.

ABC2285 $4.95Electrical Outlet Socket Boot Fits: Tractors using single wire outletNOTE: 1 wire style. Does not fit ABC395.

Battery cables - USA madeHeavy Duty; Straight terminals

unless otherwised noted

EO = Eyelet Opening

L = Length

Ground Cables (Non-Insulated)

ABC401 $13.99 (2 Gauge, EO = 7/16", L = 6")ABC411 $17.30 (2 Gauge, EO = 7/16", L = 9")ABC405 $19.55 (2 Gauge, EO = 1/2", L = 13")ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14")ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19")ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24")

Insulated Battery Cables

ABC407 $16.99 (2 Gauge, EO = 3/8", L = 10-1/2")ABC415 $18.40 (2 Gauge, EO = 3/8", L = 12")ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2",

90 degree terminal ends)ABC1582 $12.15 (2 Gauge, EO = 3/8",

EYELET BOTH ENDS, L = 16-1/4")ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21")

NOTE: May have to drill eyelet hole bigger on some applications.

ABC419 $20.35 (2 Gauge, EO = 3/8", L = 27")

Battery partsOrder # Price Description / Application

IHS721 $9.25 Universal Battery Retainer J-Bolt (Pair) Fits: Case models, Replaces: 198185A1, 393161R1 (5/16"-18 UNC x 10-3/4")

CKS2051 $2.80 Clip, Quick Release Receptacle(For Battery Door) fits: 430, 470Replaces: A36042, L40219 USA madeNOTE: 2 to 6 used per tractor;Sold individually.

Fuse holderFits: 200B - 1470, Replaces: A22874 (holder), A10958 (cap) USA made


Fuse Holder ......................................................ABC389 ................$10.95 NOTE: Rated at 20 AMP. Fits in 1/2" hole. See website for full applications.

Restoration qualityWiring harnessesNOTE: Wiring harness kits have original

style braiding and include headlight,

wires and wiring instructions. All

terminals are silver soldered and sealed.

Wires are individually labeled for ease

of installation. Alternator conversion

harnesses also available by special order.

Call or email for a quote.


CKS2256 $176.60 Wiring Harness (For 6-volt generator systems only) fits: D, DC series up to SN: 5600000 (All w/ cut out relay) USA made

CKS2268 $176.60 Wiring Harness (For 6-volt generator systems only) fits: S, SC series up to SN: 5600000 (All w/ cut out relay) USA made

CKS112 $148.50 Wiring Harness (For 6-volt generator systems only) fits: VA, VAC up to SN: 557000 (All w/ cut out relay) USA made

CKS2875 $362.20 Wiring Harness fits: 530, 530CK, 540, 541, 545 (All up to SN: 8262800) gas, LP; Will also fit 630 gas except light wires, Replaces: A35304, G44066 USA made NOTE: All using Autolite gauge panel & original generator; not for Stewart Warner gauge panel.

ABC1897 $1.55 Rear Hood Support Plate Grommet Fits: 930, 1030, 1090, 1170, 1175Replaces: 49563, A27519, H53785, O8920AB NOTE: 3 used per tractor; Sold individually.

Cigarette lightersNOTE: Anodized aluminum knob engraved w/ the word

"LIGHTER".


ABC1862 $29.956-volt Cigarette Lighter w/ Socket Fits: 200B w/ 6-volt systemReplaces: G46107

IHS949 $29.95 12-volt Cigarette Lighter w/ Socket Serviceable for 300B - 1200 (All w/ 12-volt system), Replaces: G13344, G13345, A24082, A24134

Electrical p

arts




























Cas

eE

lect

rica

l par

ts

Ignition partsOrder # Price Description / Application

ABC498 $14.95 Terminal Insulator Assembly (Round style) (For Delco distributor) Fits: Some D, S series (All w/ Delco 1111411 vertical distributor) NOTE: Fits distributor housings w/ .345" dia. round hole.

ABC500 $14.99 Terminal Insulator Assembly (Square style) (For Delco distributor) Fits: D, S series (All w/ Delco 1111411 vertical distributor); 200B, 300B, 400B, 500B, 600B w/ Delco 1111908, 1111909Replaces: 120622, 817363, 1914142, 1914144 NOTE: Fits distributor housings w/ .300" dia. hole w/ keyway.

Coils / Resistors

ABC011(6-volt)

$19.95 Distributor Coil (Metal Housing) & Mounting Bracket fits: Case modelsABC011 Replaces: A40778, Delco 1115379, D502ABC509 Replaces: A41820, Delco 1115380, U505 NOTE: ABC509 is internally resisted. See website for full applications.

ABC509(12-volt)

$19.99

ABC348 $49.95 HOT" Coil (55000-volts) fits: 12-volt systems NOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor.

ABC3161 $4.95

Coil Bracket fits: Same as ABC011, ABC509, ABC348 USA made

ABC366 $7.75 Universal 12-volt Voltage Resistor Fits: Case models NOTE: Used to step down 12-volt battery. 2 terminal style. Reduces voltage to distributor points. 2.0 Ohms of resistance. Resistor gets very hot.

Dust Cover

ABC186 $9.80 Dust Cover w/ Felt, Gasket & Washer (For Delco-Remy w/ clip held cap)Fits: DC, SC both w/ Delco vertical conversion distributor 1111411; 200B, 300B, 400B, 500B, 600B (All w/ Delco-Remy Distributor w/ clip held cap)Replaces: 1900119

Ignition parts cont...Order # Price Description / Application

Distributor Caps, parts

ABC276 $9.85 Distributor Cap (4-cyl.) (For EARLY Delco distributor w/ clip held cap up to 1963) fits: DC, SC both w/ Delco 1111411 conversion distributor; 200B, 300B, 400B, 500B, 600B w/ Delco-Remy 4-cyl. distributors w/ clip held capReplaces: Delco 811735

ABC137 $15.79 Distributor Cap (For Autolite distributor w/ spring clips) fits: VA series, 200B, 300B, 320, 350, 400, 400B, 430, 440, 500B, 530, 600B, 630, 700, 800 (All w/ Autolite distributor), Replaces: A8368, IG1324D, IG1324H, IG1324J (3-3/8" O.D.) NOTE: Only fits Autolite distributors w/ 3-3/8" O.D. cap. Will not fit model IGZ or IGW distributors.

ABC556 $2.50

Distributor Mounting Gasket fits: SC, DC w/ Delco conversion USA made

ABC488L(31/32" Bracket)

$12.95

Distributor Cap Spring Clip w/ Bracket (For Delco distributor w/ clip held cap) Fits: DC, SC both w/ Delco vertical conversion distributor 1111411, 200B, 300B, 400B, 500B, 600BReplaces: 1889967, 1889999 (bracket)(2-1/4" o/a length)

ABC488S(11/16" Bracket)

$12.95

ABC3007 $22.95 Delco Distributor Shaft Bushing & Shim Kit fits: DC, SC both w/ Delco vertical conversion distributor 1111411, 200B, 300B, 400B, 500B, 600B (All w/ Delco-Remy distributor w/ clip held cap)Replaces: 810074, 810078, 811912, 1909003(0.486" I.D., 0.656" O.D., 2.867" length)USA made NOTE: Bushing must be sized to shaft after installation.

ABC2523 $6.95 Distributor Hold Down Clamp (For 3/8" hold down bolt) fits: DC, SC series both w/ Delco 1111411 vertical conversion distributor NOTE: 2 used per engine; Sold individually.

Distributors vs. MagnetosA distributor requires a battery and coil to operate. A magneto is self sustaining,

meaning it does not require a battery to operate and will have a built-in coil.












https://www.steinertractor.com/ABC488L

https://www.steinertractor.com/ABC488S




Case


Distributor Caps, parts cont...

ABC511(6-volt)

$14.45Distributor Tag w/ (2) Rivets Fits: Tractors & Industrial w/ Delco Remy distributor (2.5" o/a length, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers.

ABC514(12-volt)

$14.45

Spark Plug Wiring Sets - USA made

FDS149 $12.50 Spark Plug Wiring Set w/ 90 degree Boots fits: 4-cyl. models NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ABC516 $32.30 Spark Plug Wiring Set (Pre-assembled) w/ Straight Boots fits: V, VC, VI, VO, Terra Trac Crawler (All w/ Continental 4-cyl. flathead engine & distributors)NOTE: Copper core; Cotton braided cover. Tailored original style.

MFS105 $19.75 Spark Plug Wiring Set fits: VAC series, 200B - 630 NOTE: Copper core w/ aluminum coating to prevent corrosion. Premium quality - no cutting or fitting required.

ACS228 $16.75 Spark Plug Wiring Set w/ Straight Boots Fits: 4-cyl. models NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ABC326 $20.35Spark Plug Wiring Set w/ 90 degree Boots fits: 6-cyl. models (35" long wires)NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ABC2863 $20.40 Spark Plug Wiring Set w/ Straight BootsFits: 6-cyl. models NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

Spark Plugs (Autolite) NOTE: Check spark plug specifications before ordering as some

models may use more than one type.

ABC324 $4.85 Fits: D, L, V, VA series (All w/ 18 mm thread), 200, 300, 320, 350, 400, 500, 600, 700, 800, 900, 430, 440, 470, 480, 530, 540, 570, 580, 630, 730, 770, 830, 870, 930, 970

ABC324 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite 3116, Plug Gap .025"


Spark Plugs (Autolite) cont...

ABC169 $7.95 Fits the following w/ 7/8" x 18 thread: C, CC, D, DC

ABC169 specifications: 7/8" thread, 5/8" reach, 15/16" hex, Autolite 3076, Plug Gap .030"

ABC168 $4.25 Fits: S, SC, SI, SOABC168 specifications: 14 mm thread, 3/8" reach, 13/16" hex, Autolite 295, Plug Gap .025"

CKS2301 $34.85Spark Plug Cover fits: VA, VAC, VAH, VAI, VAO, VAS, Replaces: VT3217, VT4348 USA made

Ignition Tune-Up Kits NOTE: Kit contains: Points, Condensor, with OR without Rotor

ABC310(w/ Rotor)

$15.95

Ignition Tune-Up Kit (For Autolite distributor) fits: VA series, 200B, 300B, 320, 350, 400, 400B, 430, 440, 470, 500B, 530, 570, 600B, 700, 800 (All w/ Autolite distributors), Replaces: IGW30280S (point set), IBB2042SS (condenser), IG1657R (rotor) NOTE: Only fits distributors w/ 3-3/8" O.D. cap. Will not fit model IGZ or IGW distributors. Kit contain: points, condenser; Point gap .020.

ABC328(w/out Rotor)

$11.30

ABC018 $10.75 Ignition Tune-Up Kit w/ Rotor (For Delco distributors w/ clip held cap through 1963) fits: DC, SC both w/ Delco vertical conversion distributor 1111411, 200B, 300B, 400B, 500B, 600BReplaces: 1944374 (point set), 1869704 (condenser), 1905590 (rotor) NOTE: Kit includes points, condenser, rotor; Point gap .020.

Rotor Buttons

ABC518 $5.50Rotor Button (For Autolite distributor w/ clip held cap) fits: VA series, 200B, 300B, 320, 350, 400, 400B, 430, 440, 470, 500B, 530, 570, 600B, 700, 800 Replaces: IG1657R NOTE: Will not fit model IGZ, IGW distributors.

ABC520 $3.99Rotor Button (For Delco-Remy distributor w/ clip held cap) fits: DC, SC both w/ Delco vertical conversion distributor 1111411, 200B, 300B, 400B, 500B, 600BReplaces: Delco 1905590, 1921285

Electrical p

arts



















Cas

eE

lect

rica

l par

tsWICO magneto, parts


XH894 $414.50WICO Magneto (Model XH894) Fits: D, S series USA madeNOTE: Using 2 bolt vertical flange mount magneto.

MAG6 $14.50

WICO XH & XHD Magneto Service (Instructions and Parts List) (1959)Printed in USA

The following parts (Sold separately) will fit XH894, XH3001,

XB2065 WICO Magneto. Will not fit factory Case magnetos:

Order # Price Description

FXH2100B $14.20 Points NOTE: Point Gap 0.015.FXH2024 $15.25 Condenser USA madeFXH2403 $58.95 Coil USA madeFXG2002A-2 $60.15 Cap USA madeFXG1008 $33.95 Rotor USA madeXHGK $4.05 Gasket (For end cap) USA madeABC556 $2.50 Mounting Gasket USA madeABC3265 $9.50 Stop Button Kit, Replaces: 90-5042

USA made

Generator partsOrder # Price Description / Application

ABC015 $24.95 6-volt Generator Cut-Out Assembly Fits: DC, LA, RC, SC series, V, VAC series (1939-43), Replaces: CB4014, Autolite 9-4, 9-5 NOTE: 15 amp. Mounting tabs are parallel w/ cut-out.

ABC1207 $17.95 Generator Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Generator Housing) fits: Some 200B, 300B, etc. w/ Delco generator mounted on LH sideReplaces: 1872638 (1-5/8" wide)USA made NOTE: Stainless steel.

ABC519 $14.45 Generator Tag w/ 2 Rivets fits: Tractors & Industrial using Autolite generator (2.300" o/a length, .732" wide, .145" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers.

Generator parts cont...Order # Price Description / Application

ABC511(6-volt)

$14.45

Generator Tag w/ (2) Rivets fits: Tractors & Industrial using Delco Remy generator (2.5" o/a length, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers.

ABC514(12-volt)

$14.45

Voltage regulatorsOrder # Price Description / Application

ABC152 $32.95

6-volt (4-Terminal) Voltage Regulator (Base Mount) fits: 200B series w/ Delco 1100531 generator, Replaces: G44861

ABC155 $34.95 12-volt (3-Terminal) Voltage Regulator (Saddle Mount) fits: 700, 730, 800, 830, 900, 930, 940, 1030 Combines: 800, 1000, 1010, 1060; Wheel Loaders: W7, W8B, W9, W9A, W9B, W10B (All w/out cabs); Will also fit generator 1100444, 1100450 Replaces: Delco 1118991, A20792

Alternators, partsNOTE: Alternators are NEW not rebuilt • To convert

6-volt to 12-volt system. For negative ground systems.


ABC535 $149.95 Mini 41 Amp Maximum Alternator w/ Pulley & Diode fits: Case models requiring a smaller dia. alternator for clearance (4-1/2" housing dia., 2-1/2" pulley dia., 3/8" belt width) NOTE: For 12-volt negative ground systems only. This alternator has a built in 3-wire internal regulator that requires an excitation circuit. Includes instructions.

ABC3551 $149.95 NEW! Mini 35 Amp Alternator w/ Pulley Fits: Case models requiring a smaller dia. alternator for clearance (4-1/2" housing dia., 2-3/4" pulley O.D., 1/2" belt width)NOTE: For 12-volt negative ground systems only. Simple 1 wire alternator hook up: Run a wire from the alternator through the ammeter to positive side of battery. Must rev the engine to 800 - 850 RPM in order to self-excite. Includes instructions.

FXH2100B FXH2024 FXH2403 FXG2002A-2 FXG1008

XHGK ABC556 ABC3265

https://www.steinertractor.com/XH894

https://www.steinertractor.com/MAG6

https://www.steinertractor.com/FXH2100B

https://www.steinertractor.com/FXH2024

https://www.steinertractor.com/FXH2403

https://www.steinertractor.com/FXG2002A-2

https://www.steinertractor.com/FXG1008

https://www.steinertractor.com/XHGK













Case

Alternators, parts cont...Order # Price Description / Application

ABC2315 $34.95Alternator Pulley (For ABC535 & ABC3551) (0.587" I.D., 1.437" o/a length, 3" pulley O.D., 5/8" belt width)USA made

ABC418 $99.95 63 Amp Alternator w/ Pulley fits: Case models (6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width) NOTE: For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through amp gauge to positive side of battery! Must rev engine to 800 - 850 RPM in order for unit to self excite.

ABC1426 $19.95Pulley only (For ABC418)(.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width)

ABC495 $20.55

Pulley only (For ABC418)(.670" shaft dia., 2-1/2" pulley O.D., 5/8" belt width)

ABC404 $34.95 Universal Mounting Kit fits: Case modelsNOTE: Used when switching from a generator to an alternator. Does not include top adjusting bracket. May have to be drilled or modified for your application.

ABC529 $23.50 Universal Top Adjusting Bracket Fits: Case models (7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models.

Starter partsOrder # Price Description / Application

Starter Solenoid Relay Assemblies

ABC138 $29.95 12-volt Solenoid Switch (3 Post Saddle Mount) fits: 300B diesel, 310, 430 gas, 400B, 440, 450, 470, 480, 500B, 530, 540, 570 gas, 580, 600B, 611B gas, diesel (All w/ Delco, Prestolite starters); Fits 630 diesel as a manifold heater solenoid (All w/ 12-volt systems), Replaces: G44835, A40795, G45017

ABC1179 $20.75 12-volt Starter Solenoid (3 Terminal) (For Delco starters) fits: 430, 470, 480, 530, 570, 580, 580B, 630 (All diesel); 730, 770, 830, 870, 930, 970 (All gas)Replaces: G44891, 594185C1

Starter parts cont...Order # Price Description / Application

ABC1366 $36.95 12-volt Starter Solenoid (4 Terminal) (For 30, 35 MT series Delco starters) Fits: 730 - 970; 1070 w/ starter 1113399, 1113478; 1090, 1170, 1175, 1270; 1370, 1470, 1570, 2470 w/ starter 1113399 (All diesel)Replaces: A40461, A42326, A43846, A44894

ABC508 $5.35 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC thread starter terminals) fits: Case modelsNOTE: Brass.

ABC506 $5.30 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals) fits: Case modelsNOTE: Brass.

Starter Drives, parts

ABC547 $41.95 Starter Drive (Bendix) fits: C, D series w/ starter MAB4105, MAB4040; L, LA w/ starter ML4216, ML4329; S series w/ starter MZ4095; 400 w/ starter MAX4095 gas, LP, Replaces: 1858522NOTE: Original spring style. 10 teeth.

ABC458 $39.50 Starter Drive (Bendix) fits: V, VA, VACw/ starter MZ4072, MZ4114NOTE: Original spring style. 10 teeth.

ABC507 $23.95Starter Drive Spring only (For ABC458)USA made

IHS132 $44.95 Starter Drive (Bendix) fits: Same as ABC458 NOTE: Improved positive style. 10 teeth.

ABC1203 $17.95 Starter Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco starter housing)Fits: Some 300B w/ Delco Starter SN: 6095009 & up, etc., Replaces: 1886923(1-3/16" wide) USA madeNOTE: Stainless steel.

ABC517 $14.45 Starter Tag w/ (2) Rivets fits: Tractors & Industrial using Autolite starters(2.955" o/a length, .915" wide, .140" dia. rivet holes, 2.650" c.c. rivet holes)USA made NOTE: Anodized aluminum. Customer must stamp numbers.

ABC511(6-volt)

$14.45

Starter Tag w/ (2) Rivets fits: Tractors & Industrial using Delco Remy starter(2.5" o/a length, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA madeNOTE: Stamped w/ raised letters. Customer must stamp numbers.

ABC514(12-volt)

$14.45

Starter parts continue on next page

Electrical p

arts






















Cas

eE

lect

rica

l par

tsStarter parts cont...


Push Button Switches

IHS798 $12.95

Starter Push Switch fits: 430 - 4890Replaces: A36948 NOTE: Wires attach to switch w/ eyelets & screws. See website for all applications.

ABC233 $12.50 Starter Push Switch, Extra heavy duty momentary push button switchFits: 400 - 600 series, IndustrialsReplaces: 09995AB, A30858(Mounting stem 5/8" - 32 thread, 21/32" long) NOTE: Depress button: ON; Spring return: OFF. two screw type terminal. Up to 35-v (DC), rubber cap for dust & moisture protection.

ABC066 $16.40 Manual Starter Switch (Base Mount) (For 7/8" hole) fits: D, DC, L, R, S, VA, VC series, Replaces: O4981AB, VT3588, Delco 405C (Dash mount for 1-3/4" mounting hole) NOTE: Will work on 6-volt or 12-volt systems.

Push / Pull Switches

ABC398 $8.20 Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment w/ battery ignition(10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. This can be used on battery ignition systems only.

ABC489 $16.50Magneto Push / Pull Ignition Switch (O.E.M.) fits: Case models w/ Magneto Ignition NOTE: One screw type terminal; Out: ON; In: OFF.

Ignition / Key Switches, parts

ABC065 $12.99 Ignition / Key Switch w/ (2) Keys & Mounting Nut fits: VA, VAC, VAI, VC, other Case models w/ 2-wire switchNOTE: 2 wire switch. May have to drill hole to 0.800" on some applications.

IHS760 $19.95 Ignition / Key Switch w/ (2) Keys & Mounting Nut fits: VA, VAC, VAI, VC, other Case models w/ 2 wire switchUSA made NOTE: 2 spade terminal switch. May have to drill hole to 0.800" on some applications.

CKS111 $32.50 Ignition / Key Switch w/ 2 Keys (O.E.M.) Fits: 430, 470, 480, 480B, 530, 570, 580, 580B, 584, 585, 586CKB, 630, 730, 830, 930 gas ; Skid Steers: 1830, 1835 gas; 1030 diesel, Replaces: A24511 USA madeNOTE: Three post w/ four screw type terminals.

Starter parts cont...Order # Price Description / Application

Ignition / Key Switches, parts cont...

CKS113 $32.15Ignition / Key Switch w/ 2 Keys (O.E.M.) Fits: 430, 470, 480, 480B, 530, 570, 580, 580B, 630, 730, 830, 930, 1200, 1470, W5A, 500LK, 1150, 1155 (All diesel)Replaces: A24510 USA made NOTE: Four post w/ five screw type terminals.

KEY1094 $2.25

Ignition Key (For CKS111, CKS113)Replaces: A24509 USA made

ACS288 $36.95

Ignition / Key Switch w/ (2) Keys Fits: 700, 800, 900; Industrials: 680B, 680C, 680CK, W5 - W26, 310E, 310F, 310G Replaces: A11373, L17820, D75657(.995" dia. threaded end)NOTE: Five spade terminals.

KEY01 $4.50

Ignition Key (For ACS288)Replaces: A20346NOTE: Brass.

ABC3272 $14.95 Ignition / Key Switch w/ 2 Keys Fits Case / David Brown: 380CK, (770A SN: 588498 & up), (770B SN: 588498 & up), 780, (880A SN: 544392 & up), 880F, 880UF, 885, (Selectamatic 990, 995), (990A SN: 456233 & up), 996, 1190, 1194, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1594, 1690, 1694Replaces: Case / David Brown: K203992, K912384, K920293, K920923, K929365, K945294, 3107556R93 NOTE: 6 spade terminals: (2) 0.375" wide, (4) 0.250" wide, 0.625" threaded end, 4-position on heat start.

FDS400 $2.95

Ignition Key (For ABC3272) Replaces: K962338

ABC400 $15.49

Ignition / Key Switch w/ (2) Keys & Mounting Nut fits: Ag & Light Industrial equipment (3/4" dia. thread)NOTE: Four stud type terminals.










https://www.steinertractor.com/KEY1094


https://www.steinertractor.com/KEY01





Case

Light switches, partsOrder # Price Description / Application

IHS950 $14.50Field Resistor on Light Switch Fits: VA series up to SN: 5060679 (All w/ cut-out on generator)NOTE: Fits switch VTA463.

ACS139 $39.95 3-Position Light Switch (Hi-Lo-Charge) (Hi charge w/ lights) fits: VAC, VAH, VAI, VAO (All up to SN: 5060679 & w/ cut-out on generator), Replaces: VTA463(.800" dia. threaded stem, 10-32 thread)NOTE: Three screw type terminals.

ABC425 $4.95

Knob only (Says "LIGHTS") (For ACS139) (10-32 thread)

ABC367 $4.95

Knob only (Plain Face) (For ACS139) (10-32 thread)

JDS631 $12.95 Universal 3-Position Fused Push / Pull Starter & Light Switch fits: VA series SN: 5060679 & up, V series, Replaces: VT2108, VTA2683, VTA3163 (10-24 NC knob thread) NOTE: 15 AMP, five terminals, fused, 7/16-20 stem, black plastic knob.

IHS599 $46.50 12-volt Rotary Light Switch (4-position)Serviceable for 700 - 1030 seriesReplaces: A20620 USA made NOTE: Knob will look different, but switch is O.E.M. and the original knob can be used with this switch.

ABC398 $8.20 Universal 2-Position Push / Pull Light Switch fits: Ag & Light Industrial equipment (10-24 knob thread)NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused.

Headlights, partsNeed light components? See pages 95 & 96


OLS053(6-volt)

$74.95

Complete Headlight Assembly Serviceable for DC, LA, SC, 400, 500, 600, Replaces: 9668AB, O6330AB(5-3/4" curved lens) NOTE: Zinc plated. See light chart D for subcomponents.

OLS055 (12-volt)

$74.95

Headlights, parts cont...Order # Price Description / Application

ABC336 $84.506-volt Complete Headlight Assembly Fits: C, LA, RC, V series, etc.Replaces: O4576AB, O6752AB, VT2615(7" flat lens) NOTE: Zinc plated. See light chart E for subcomponents.

ACS150 $49.50

6-volt Complete Headlight Assembly Fits: VA, VAC, VAH (All up to SN: 5400000), Replaces: VT3660(4-3/4" curved lens) NOTE: See light chart A for subcomponents.

IHS351B(6-volt)

$44.95

Complete Headlight Assembly Fits: VA, VAC series SN: 541000 & up Replaces: VTA3026, VTA3027(4-3/4" curved lens, 2-1/2" stud length) NOTE: See light chart A for subcomponents.

IHS351B12V(12-volt)

$46.95

IHS647 $34.95

12-volt Sealed Beam Headlight Assembly (For Flat Top Fenders) Serviceable for 770 & upReplaces: A59701 (4-1/2") NOTE: Post is out of back w/ wires through post.

ABC3441 $64.65NEW! 12-volt LED Trapezoid Headlight Assembly w/ Cree LED chips fits: Same as IHS647 (6 LED bulbs, 1/2" rear stud mount, 4-1/2" dia. bulb) NOTE: Will update your tractor to LED technology.

ABC3500 $64.65NEW! 12-volt LED Flood Light Assembly w/ Cree LED chips Fits: Same as IHS647(6 LED bulbs, 1/2" rear stud mount, 4-1/2" dia. bulb) NOTE: Will update your tractor to LED technology.

ABC3514 $39.50 NEW! 12-volt LED Flood Light Assembly w/ Bridgelux LED chips Fits: 12-volt applications(1 bolt bottom mount for 0.335" mounting hole) NOTE: 60 degree flood beam pattern. See website for all specifications.

Headlights, parts continue on next page

Electrical p

arts









https://www.steinertractor.com/OLS053




https://www.steinertractor.com/IHS351B

https://www.steinertractor.com/IHS351B12V






Cas

eHeadlights, parts cont...Need light components? See pages 95 & 96


ABC353(Lo Beam)

$9.50

12-volt Sealed Beam Lamp Fits: Same as IHS647ABC353 Replaces: 4411, A40855ABC460 Replaces: 4410(4.365" O.D. NOTE: Check bulb number before ordering.

ABC460(Hi Beam)

$16.50

ABC3474(Trapezoid pattern)

$44.95

NEW! 12-volt LED LampFits: Same as IHS647, ABC3441, ABC3500, ABC3514ABC3474 Replaces: 4411ABC3490 Replaces: 4410(4.50" O.D.)

ABC3490(Flood pattern)

$44.95

JDS676 $18.69Clamp Ring w/ Screw (For Sealed Beam Lights) fits Wheel Tractors: 330, 430, 470, 480, 480B, 530, 570, 580, 580B, 630, 730, 830, 930, 1030; Lawn & Garden: 220, 222, 224, 444, 446, 644, 646; Skid Steers: 1500, 1530B, 1700Replaces: B50255, B50258 (4-1/2")

ABC3028 $12.50Light Bezel (For 'Hobbs' style light w/out glare guard) fits: Same as IHS647Replaces: A25213, D31441(5.250" O.D., 3.675" I.D., 1.125" wide, 3 outer tabs to attach rubber ring to light housing & 4 inner tabs to secure to sealed beam) NOTE: Rubber. See website for additional applications.

ABC3035 $21.80Light Bezel (For 'Hobbs' Late style w/ glare guard) fits: Tractors w/ 'Hobbs' round lights & 5.250" O.D. bezel when extended glare guard bezel is desired (5.250" O.D., 3.675" I.D., 2.430" wide, 3 outer tabs & 4 inner tabs)NOTE: Rubber. Will fit IHS647.

ABC527 $4.95

Concaved Mounting WasherFits: Same as IHS647(2-1/4" O.D., 9/16" center hole)

Dash lights, partsFits: Case models(1/8" long from flange to first lip, 11/16"-32 UN threaded stem, 5/8" dia. stem) NOTE: Dash lights not exact of original, but works great.


6-volt Dash Light w/ Bulb .................................JDS495 ............. $24.50

12-volt Dash Light w/ Bulb ...............................JDS499 ............. $24.50

Chrome Cover (1" dia.) .......................................JDS588CH ....... $12.95

Black Cover (1" dia.) ...........................................JDS588 ............. $12.50

Tail lights, partsNeed light components? See pages 95 & 96


IHS473(6-volt)

$69.95

Combo Tail Light Assembly w/ Red Jewel Lens & Rotary Switch Fits: VA series, Early 300BReplaces: VTA3396(4-3/4") NOTE: See light chart A for subcomponents.

IHS455 (12-volt)

$69.95

OLS073(6-volt)

$108.00Combo Red / Dot Tail Light Assembly Fits: DC, LA, SC, 400, 500, 600, 900 OLS073 Replaces: O8810ABOLS074 Replaces: O9897AB(5-3/4") NOTE: Switches from red to white. See light chart D for subcomponents.

OLS074 (12-volt)

$108.00

ACS355 $99.30

12-volt Sealed Beam Combo Tail Light Assembly fits: 300B - 1030Replaces: A20965 (4-3/4") NOTE: See light chart B for subcomponents.

IHS899 $19.95 12-volt Sealed Beam Tail Lamp w/ transparent red background using separate bulb fits: 300B - 2870Replaces: 4409, A40855(4-1/2" dia.)

ABC544 $17.1512-volt Fender & Cab Warning Light w/ 2 amber lenses, double contact bulb & black die cast base Serviceable for 430 - 1370 (All using round warning light)Replaces: A34853, A143600, D49734(4" dia.)

Rear view

JDS588CH JDS588

JDS495JDS499

Rear view

Ele

ctri

cal p

arts

Rear view









https://www.steinertractor.com/6-volt%20Dash%20Light%20w/%20Bulb

https://www.steinertractor.com/12-volt%20Dash%20Light%20w/%20Bulb

https://www.steinertractor.com/Chrome%20Cover%20(1%22%20dia.)

https://www.steinertractor.com/Black%20Cover%20(1%22%20dia.)









Case

Tail lights, parts cont...Order # Price Description / Application

ABC3538 $49.75NEW! 12-volt LED Fender & Cab Warning Light w/ amber & red lenses Fits: Tractors & equipment w/ 12-volt systems (4" dia. lense & 1/2-20" mounting stud) NOTE: See website for dimensions & detailed information.

ABC548 $9.95 12-volt Round Tail Light Assembly w/ licensed lamp window, red lenses & black ABS base Serviceable for 430, 470, 530, 570, Replaces: A36831(4" dia.; 2 stud mount, 1-7/8" c.c. studs)

Tail lights, parts cont...Order # Price Description / Application

ABC1439 $3.45

6-volt Bulb, Double contact (For ABC544, ABC548)

ABC546 $27.50

12-volt Fender & Cab Warning Light w/ 1 amber lens, 1 red lens, amber side marker, single contact bulb & black ABS base fits: Late 770 - 4890 (All using rectangular warning lights)Replaces: A44201 (4-1/2" dia.)

Light subcomponentsNeed just a lens, bulb or gasket? For application information see the light assemblies

on the previous pages or go to www.SteinerTractor.com

Light chart AThe light subcomponents below fit ACS150, IHS351B, IHS351B12V, IHS455, IHS473:IHS475 $6.00 Light Terminal

IHS352 $14.95 Lens (Dimpled outer surface) w/ Guide name

ABC388 $14.95 Lens (Smooth outer surface) w/ Guide name

IHS353B $14.50 Black Ring (Bezel)

ABC560 $4.25 Seamless Gasket

IHS355 $3.95 Gasket

IHS354 $3.00 6-volt Bulb


ABC320 $11.50 Reflector (For Head & Work lights)

ABC378 $19.95 Reflector (For tail lights w/ red jewel lens & 12-volt bulb in jewel lens)

IHS474 $14.95 Jewel Lens w/ Base & 6-volt Bulb

ABC1115 $14.95 Jewel Lens w/ Base & 12-volt Bulb

ABC342 $1.80 6-volt Light Bulb (For 6-volt Jewel Lens)


ABC541 $18.70 Combo Tail light Switch w/ Lever Style Knob

ABC536 $6.50 Lever Style Plastic Knob

Light chart BThe light subcomponents below fit ACS355:JDS676 $18.69 Clamp Ring w/ Screw (For Sealed Beam Lights)

IHS899 $19.95 12-volt Sealed Beam Tail Lamp w/ transparent red background using separate bulb

ABC345 $1.95 12-volt Bulb, Single contact



Light subcomponents continue on next page

Electrical p

arts

IHS475

IHS352

ABC388

IHS353B

ABC560

IHS355

IHS354

IHS436

ABC320

ABC378

IHS474ABC1115

ABC342ABC343

ABC541

ABC536

JDS676

IHS899

ABC345

ABC541

ABC536









https://www.steinertractor.com/IHS353B



















Cas

e

Light chart DThe light subcomponents below fit OLS053, OLS055, OLS073, OLS074:IHS475 $6.00 Light Terminal

OLS062 $31.50 Lens w/ Guide name

OLS063 $24.95 Ring (Zinc-plated)

OLS064 $3.95 Gasket

OLS154 $27.95 Reflector (For OLS053, OLS055 w/ 12-volt Bulb)



OEM lights use the following (4) bulbs. Check bulb prior to ordering:

OLS068 $4.95 O.E.M. 6-volt Bulb w/ Ring, Single Contact


ABC358 $7.95 O.E.M. 6-volt Bulb w/ Ring, Double Contact

ABC359 $12.00 O.E.M. 12-volt Bulb w/ Ring, Double Contract

IHS474 $14.95 Jewel Lens w/ Base & 6-volt Bulb

ABC1115 $14.95 Jewel Lens w/ Base & 12-volt Bulb





Light chart EThe light subcomponents below fit ABC336:IHS475 $6.00 Light Terminal

ABC307 $19.95 Flat Lens

ABC312 $16.50 Ring

ABC347 $7.95 Gasket

ABC350 $14.95 Reflector (Uses IHS354, IHS436 Bulbs)



OEM lights use the following (4) bulbs. Check bulb prior to ordering:



ABC358 $7.95 O.E.M. 6-volt Bulb w/ Ring, Double Contact

ABC359 $12.00 O.E.M. 12-volt Bulb w/ Ring, Double Contract

Ele

ctri

cal p

arts

Light subcomponents cont...Need just a lens, bulb or gasket? For application information see the light assemblies

on the previous pages or go to www.SteinerTractor.com

OLS068OLS075

ABC358ABC359

Bottom views

IHS475

OLS062

OLS063

OLS064

OLS154

IHS354

IHS436

OLS068

OLS075

ABC358

ABC359

IHS474ABC1115

ABC342

ABC343

ABC541

ABC536

OLS068OLS075

ABC358ABC359

OLS068OLS075

ABC358ABC359

Bottom views

OLS068OLS075

IHS475

ABC307

ABC312

ABC347

ABC350

IHS354

IHS436

From a satisfied customer!

“Dear folks, Just wanted to thank you for the warm and knowledgable voice who helped Jim find his tractor filter. It arrived quickly and to add to your service you enclosed a hometown paper, parts catalog and CANDY…can't beat that! Thank you.” - Jim and Diane H., Brush Prairie Organic Farmers






























Case

EmblemsOrder # Price Description / Application

CKS081 $30.60

Front Emblem / Nameplate fits: S, SC, SI, SO, Replaces: O6331AB NOTE: Curved metal, dark blue background.

CKS082 $98.95Eagle / Sunburst Emblem fits: 300, 420, 425, 600, Replaces: A7600(4-3/8" O.D.) USA madeNOTE: Plastic, injection-molded.

CKS054 $34.95 Case Eagle Emblem w/ Retaining Clips Fits Ag Tractors: 200B, 300B, 400B, 430, 500B, 530, 600B, 630, 700, 730, 800, 830, 930, 1030, 1200; Crawlers: 310C, 310D, 310E, 310F, 450; Lawn & Garden: Older Case models, Replaces: A11492, A24526(4-1/2" tall x 1-3/4" wide, 2" c.c.)NOTE: Chrome. Fits on flat spot between headlights.

CKS098 $37.95Side Emblem w/ Retaining ClipsFits: 300B, 400B, 500B, 600B, 700, 800, 900Replaces: A11320 (2" tall x 7-1/16" long)NOTE: Chrome.

Serial number tags, partsNOTE: Anodized aluminum. Customer must stamp own serial

number.


CKS102 $24.95Serial Number Tag (2 Rivet Holes) w/ Rivets fits: D series, LA series, S series, V series, 500 (1-7/16" x 3-3/16") USA made

CKS104 $24.95Serial Number Tag (2 Rivet Holes) w/ Rivets fits: 200B, 300B, 310, 320, 350, 400 series, 400B, 430, 470, 480, 500B, 530, 570, 580, 600B, 630, 730, 800 series, 830, 930, 1030 USA made

ABC464 $0.29

Rivet only (For Serial Number Tags)(6 x 3/8", .135" shank O.D.)NOTE: Steel. Sold individually.

ABC1585 $0.50 Rivet only (For Serial Number Tags)(.347" o/a length, .225" head dia., .255" useable shank length, .126" shank dia.)USA made NOTE: Brass. Sold individually. Customer may need to drill the tag for the rivet.

Ch

assis parts

Grille partsOrder # Price Description / Application

CKS2049 $9.95 Quick Release Grille Stud Assembly Fits: 430 - 470, 530 - 570 (All SN: 8262800 & up), 730, 830 series (All SN: 8253501 & up), 930 SN: 8253501 & up, 1030Replaces: A32881 USA made NOTE: 4 used per tractor; Sold individually.

CKS2051 $2.80 Clip, Quick Release Receptacle (For Grille Stud) fits: 430, 530 both SN: 8262800 & up; 730, 830, 930 (All SN: 8253501 & up), 1030Replaces: A36042, L40219 USA madeNOTE: 2 to 6 used per tractor; Sold individually.

IHS946 $1.75 Cage Nut fits: 200B, 300, 300B, 350, 400B, 500B, 530, 600B, 630, Replaces: G48001, 131-105 (5/16"-18 NC) NOTE: 2 to 4 used on most models; Sold individually.

ABC2053 $1.50 Hood, Dash Cage Nut fits: 200B, 300B, 400, 400B, 430, 500B, 530, 600B, 630, 700, 800, 900, 930, 1030, Replaces: G48002, 131-115 (1/4" - 20 NC) NOTE: Zinc finish. 6 - 25 used depending on model; Sold individually. See website for full applications.

Air cleaner partsOrder # Price Description / Application

CKS135 $21.50

Air Cleaner Cap fits: C, CC, D, DC, DI, L, LA, RC, V, VC, Replaces: O7080A1(6" O.D. x 2-3/4" tall) USA madeNOTE: Weld to existing pipe. Bare steel.

CKS095 $42.95Air Cleaner Cap fits: VA series; Industrial Crawlers: 310, 310C, 310D, 310E, 310F, 320, 400B, 420, 420B, 420C, 500B gasReplaces: VT3812 (1-13/16" I.D.)

CKS132 $34.95Air Cleaner Inlet Extension Pipe Fits the following up to SN: 4700000: VA, VAC, VAH, VAI, Replaces: VT3656(20-1/4" o/a length) NOTE: For use w/ 1-piece manifold. Close out.

CKS134 $34.95

Air Cleaner Inlet Extension Pipe Fits the following w/ SN: 4700000 & up: VA, VAC, VAH, VAI, Replaces: VT4560(22-3/4" o/a length) NOTE: For use w/ 2-piece manifold.

Air cleaner parts continue on next page



















Cas

eC

has

sis

par

tsAir cleaner parts cont...


IHS282 $47.15 Air Cleaner Cap fits: 310, 320, 350, 450, 430, 480, 530, 580, W5A (All gas Industrials), Replaces: D22685(2" I.D., 2-1/8" O.D.) USA madeNOTE: Black finish.

IHS283 $49.05 Air Cleaner Cap fits: 730 gas, 830 Ag gas; Industrials: 450, 530CK, 580CK, W7, W9Replaces: A21430 (2-1/4" I.D., 2-3/8" O.D.) USA made

ABC1826 $54.50 Air Cleaner Cap fits: Some 350B - 680CK; Also fits the following diesels: (730, 830 up to SN: 8201146), 770, 870Replaces: A21433, A61276(2-1/2" I.D., 5-1/4" O.D., 4" tall) USA made NOTE: Black finish.

FDS034 $14.95 Air Cleaner Oil Cup (Clamp-Style) Fits: 200B, 300, (300B SN: 6095009 - 6122024), 320, 330, 430, 470 gasReplaces: G46012 (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high)

FDS033 $9.95Air Cleaner Inner Oil Cup fits: 200B, 300, (300B SN: 6095009 - 6122024), 320, 320B, 330, 430, 470 gas, Replaces: G46013

FDS081 $10.95

Air Cleaner Oil Clamp (For FDS034)Replaces: G45011

JDS540 $27.50 Air Cleaner Oil Cup fits: 430, 470, 480 diesel; 530, 570, 580, 630, W5A gasReplaces: G46325 (5-3/8" I.D., 5-3/4" O.D.)

ABC422 $13.25 Air Cleaner Oil Bath Filter Element(3" wide x 78" long) NOTE: Replaces the mesh in existing air cleaners. Sold by the bag. Normal utility air cleaners will use 2 bags.

ABC1765 $14.65 Dust Unloader Valve (Vacuator Valve) (For Dry Air Cleaners) fits: 1170, 1175, 2090 & Industrials using 3" unloader valve, Replaces: L30414, S113982

Pre-cleaner partsOrder # Price Description / Application

ABC1824 $59.95 Pre-Cleaner Cap Assembly fits: Some 310 - 420C; Fits the following diesels: 430, 470, 480; Fits the following gas: 530, 570, 580, 630 (All w/ 2" I.D. plastic base, 5-1/2" bowl), Replaces: D20604 (2" I.D. plastic base, 5-1/2" pre-cleaner O.D.) USA made

Pre-cleaner parts cont...Order # Price Description / Application

ABC383 $77.75 Pre-Cleaner Cap Assembly fits the following diesels: 450, 530, 570; Also fits the following gas, LP: 730, 830 (All w/ 2-1/4" I.D. base & 7" bowl)Replaces: A24439 USA made

ABC512 $74.95 Pre-Cleaner Cap Assembly fits: 450B, 600, (730, 830 diesel both up to SN: 8201146), 770, 870, 930, 1030, W7, W8, W10 (All w/ 2-1/2" I.D. base & 7" bowl)Replaces: A24391, A64589 USA made

JDS741 $99.95Pre-Cleaner Cap Assembly w/ Brass Nut Fits: 580D Turbo & others (All w/ 3" I.D. base & 7" bowl) (3" I.D. base)NOTE: Powder-coated green.

ABC470 $39.95Pre-Cleaner Cap Assembly fits: 580D turbo & others (All w/ 3" I.D. base & 7" bowl) (3" I.D. base)

ABC510 $64.60Pre-Cleaner Cap Assembly fits: Case models (All w/ 4" I.D. base & 10-1/2" bowl)

ABC554 $45.35 Pre-Cleaner Cover w/ Brass Knurled Nut Fits: Some 310 - 310G, 420C, 430, 450, 470, 480, 530, 570, 580, 630; Skid Steers: 1700, 1845 (All w/ 5-7/16" I.D. & 5-1/2" bowl)Replaces: D30676 USA madeNOTE: Aluminum.

ABC484 $24.95 Pre-Cleaner Bowl fits: Some 310 - 310G, 420C, 430, 450, 470, 530, 570, 630; Skid Steers: 1700, 1845 (All w/ 5-1/2" dia.)Replaces: D30675 NOTE: Check measurements before ordering. Clear plastic.

ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom = 5", Cone I.D. at top = 2-7/16", Bowl side height = 2-7/16", Overall height = 3-9/16"

JDS559 $24.95

Pre-Cleaner Cover w/ Brass Nut (All w/ 7" dia. bowl), Replaces: 73187, A24395 NOTE: Powder coat green. Go to website for full applications.

ABC338 $13.95 Pre-Cleaner Bowl (For 2" to 3" inlet) Fits: Some 430, 470, 530, 570 diesel, 580C, 730, 770, 830CK, 830 SN: 8201145 & up, 870, 930, 1030CK, Replaces: 73186, Can replace Donaldson bowl P020227NOTE: Clear plastic.

ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3", Cone I.D. at top = 3-1/2", Overall height = 4-1/8"





















Case

Pre-cleaner parts cont...Order # Price Description / Application

JDS557 $68.95Pre-Cleaner Base (For ABC338 Bowl & JDS559 Top) fits: All Donaldson Pre-Cleaners (All w/ 3" I.D. base & 7" bowl)NOTE: Metal. Check size before ordering.

JDS561 $75.00Pre-Screener w/out Screen fits: All Donaldson Pre-Cleaners (All w/ 3" O.D. pipe) NOTE: Metal. Powder coat green. Check size before ordering.

ABC3163 $39.95 Screen w/ Clip & 2 Springs (For pre-screener) fits: Case models (All w/ 7" dia. pre-cleaner bowl)(5-1/4" tall x 19-3/8")NOTE: Powder coat creme.

JDS938 $4.95 Pre-Screener Clip & Springs Kit (For ABC3163)NOTE: Powder coat green.

ABC339 $17.25 Pre-Cleaner Bowl (For 3" to 4" inlet) Fits: 970, 1070, 1090, 1170, 1175, 1270, (1370 up to SN: 8727601)Replaces: A42467, Can replace Donaldson bowl P016330 NOTE: Clear plastic.

ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height = 3", Cone I.D. at top = 5-9/16", Overall height = 4"

ABC515 $49.95NEW! Pre-Screener Screen w/ Clips Fits: 970, 1070, 1090, 1170, 1175Replaces: A42286(10" tall x 28") NOTE: Powder coat green.

Fuel tank partsOrder # Price Description / Application

MIS129 $67.20 Fuel Tank Liner Kit USA madeNOTE: Seals tanks up to 12 gallons. Includes all of the products necessary to successfully clean, prep and line your tank. Once lined, pinhole leaks will be sealed & future rust will be prevented. Fuel tank liner kit ships in own box. 1 kit per box. Can not be sold in the state of CA. For CA residents we can special order a low V.O.C. acetone formula.

ABC494 $3.95 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts(3' L x 1" wide x .042" thick) USA made NOTE: Economy black woven nylon. Sold in 3-foot length. Can be glued or riveted.

Fuel tank parts cont...Order # Price Description / Application

ABC1823 $4.95 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts (3' L x 1" wide x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Can be glued or riveted.

ABC1656 $5.25 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts (3' L x 1-1/2" wide x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Can be glued or riveted.

ABC1827 $5.60 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts (3' L x 2" wide x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Can be glued or riveted.

ABC3256 $3.85Fuel Sending Unit Gasket fits: 430 - 1030Replaces: A11822 (2.850" O.D., 1.715" I.D., 0.091" thick, (5) 1/4" screw holes)USA made NOTE: See website for full applications.

ABC3261 $3.85 Fuel Sending Unit Gasket fits: Case / IH 770 - 4894, 7110 - 8950, 9110 - 9390, MX100 - MX170; David Brown: 990 - 1690 w/ top mounted sender, Replaces: 104812C3, A11822, 528359R94, K946159(2.850" O.D., 1.715" I.D., 0.132" thick, (5) 1/4" screw holes) USA made

Fuel caps, partsOrder # Price Description / Application

CKS121 $19.95Fuel Cap (Vented) w/ Gasket fits: C, CC, D, DC, L, LA, R, RC, S, SC, 400 gas, Replaces: O10909A, A8995, A26400 (cap), O1036AB, A31101 (gasket)(3" I.D., 2-5/8" tang end to end length)

ABC1221 $4.95Gasket only (For CKS121, CKS119)Replaces: A31101 (2.242" I.D., 2.948" O.D.) USA made NOTE: Rubberized cork.

CKS117 $14.99 Fuel Cap w/ Gasket (Vented) fits: V, VA series (Will fit both main & auxiliary fuel tanks); 200B, 300B, 320B, 420B, 500B, 600B, Replaces: G13271(2.25" I.D., 2.37" O.D., 1.80 outer tang to tang) NOTE: Like original.

Fuel caps, parts continue on next page

Ch

assis parts

Underside view

Underside view








https://www.steinertractor.com/MIS129











Cas

eFuel caps, parts cont...


CKS119 $19.95 Fuel Cap w/ Gasket fits: 530 gas up to SN: 8248494, 530 diesel up to SN: 8247916, 630, (early 730, 830, 930 w/ fuel tank in front of driver), 1200, 1470; Industrials: 780, W5A, W7, W7C, W7E, W9A, W12, Replaces: A22451, A33558(3-1/2" O.D., 2-1/2" length tangs)NOTE: Vented through top of cap.

ABC003(Chrome)

$9.95 Fuel Cap (Vented) w/ MHS043GK Gasket fits: 430, 530 gas SN: 8248495 & up, 530 diesel SN: 8247917 & up, 470, 480, 480B, 570, 580, 580B, (Late 730, 830 both w/ 2-7/8" O.D. cap), 770, 870, 930, 970, 1030, 1070, 1090, 1170, 1175, 1270, 1370, 1570, 2470; Serviceable for V, VA series (Will fit Both main & auxiliary fuel tanks); 200B, 300B, 320B, 420B, 500B, 600B, Replaces: A32119, G13271(2-7/8" O.D.)

MHS043(Zinc)

$9.95

MHS043GK $1.50Gasket (For MHS043) (2.622" O.D., 1.500" I.D., 0.100" thick) USA made NOTE: Rubberized cork gasket.

Sediment bowl assys., partsOrder # Price Description / Application

ABC002 $29.95 Sediment Bowl Assembly (All Fuel) Fits: DC, RC, SC series, Replaces: A31102, O8913AB (Includes shallow bowl w/ 3/8" pipe inlet, (2) 1/8" pipe outlets)NOTE: For tractors w/ (1) outlet use ABC092 sediment bowl assy.

ABC092 $27.95Sediment Bowl Assembly fits: D, S, V, VA, 200 - 580B, 850, 850B, 850C Replaces: O3990AB1, A30049(3/8" pipe inlet, 1/8" pipe outlet, 1.280" long bowl. Includes 5/16" compression adaptor fitting)

ABC002 / ABC092 components

NOTE: The following parts (Sold separately) will fit ABC002 &

ABC092 Sediment Bowl Assys:


ABC123 $2.90 Glass Bowl, Replaces: A11209 (2" O.D., 1.280" L)

ABC039 $1.60 Cork Gasket, Replaces: A11208 (2" O.D.) USA made

Underside view

ABC123 ABC039 ABC229 ABC534 ABC563

Ch

assi

s p

arts

ABC229 $3.50 Brass Screen, Replaces: A11211, T7040(2" O.D., 3/8" dia. center hole)

ABC534 $3.85 Plastic Screen (1-7/8" O.D., 3/8" dia. center hole)

ABC563 $4.95 Bail Assembly w/ Nut, Replaces: A11212USA made


ABC281 $34.95Sediment Bowl Assembly w/ 2.315" long Bowl & 1/4" x 5/16" Adapter Fits: LA, 400, 420, 425, 700, 800, (Late 730, 830) gas, Replaces: A26615(3/8" pipe inlet, (1) 1/8" pipe outlet)

IHS713 $70.75All-Fuel Sediment Bowl Assembly (For tractors w/ two tanks)Fits: CC, L, Early LA (All w/ All-fuel)Replaces: O1933AB(3/8" pipe inlet, Includes (2) 5/16" compression outlets) USA made

ABC281 / IHS713 components

The following parts (Sold separately) will fit ABC281 & IHS713

Sediment Bowl Assys:


ABC124 $4.99 Glass Bowl, Replaces: A11204, A10456(2.315" L, 2-1/8" O.D.)

JDS642 $1.15 Cork Gasket, Replaces: A11211(2" O.D., 3/8" dia. center hole)

ABC229 $3.50 Brass Screen, Replaces: A11211(2" O.D., 3/8" dia. center hole)

ABC534 $3.85 Plastic Screen (1-7/8" O.D., 3/8" dia. center hole)

ABC236 $7.49 Bail Assembly w/ Brass Nut fits: CC, L, LA, RC, S series, 400, 420, 425, 700, 730, 800, 830 gas, Replaces: A11206, A11207(2-1/8" O.D., 2.370" long)

Fuel filters, partsOrder # Price Description / Application

ABC490 $6.45

In Line Fuel Filter w/ Hose & Clamps Fits: Case models using a 3/8" fuel lineNOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor.

Underside view

Underside view

ABC124 JDS642 ABC229 ABC534 ABC236





















Case

Fuel filters, parts cont...Order # Price Description / Application

ABC1315 $8.65 Fuel Tank Screen fits: Most Case models w/ stem style sediment bowl. Will fit ABC092, ABC281, IHS713 sediment bowl assemblies (.375" screen O.D., .216" pipe O.D. 2.530" o/a length) USA madeNOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281, IHS713 customer must drill sediment bowl stem out.

ABC1421 $5.50EACH

Diesel Fuel Filter Element w/ Seals (For Cav/Simms diesel fuel filters) Fits: 380, 770, 780, 880, 885, 990, 995, 996, 1190, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1490, 1494, 1594, 1690 Replaces: K960911, 3044506R93, Cav 7111/296 (3-1/2" O.D. x 3/4" I.D. x 2.85" tall) NOTE: Sold individually.

Throttle leverFits: 200 - 400B gas, 430 up to SN: 8262800 gas, diesel, (430 SN: 8262801 & up gas, diesel w/ narrow front & w/out hydrostatic steering), 500B, 600B seriesReplaces: G1085 (lever), B138-82 (roll pin)USA made


Throttle Drive Lever w/ Roll Pin ................CKS2968 ...............$48.85NOTE: Bare aluminum.

Clutch partsOrder # Price Description / Application

ABC3000 $8.95Clutch Pilot Bearing fits: S, SC seriesReplaces: O5835AB (0.787" I.D., 1.850" O.D., 0.551" wide) NOTE: Sealed bearing.

IHS730 $7.50 NEW! Clutch Pilot Bushing Serviceable for VAC, 200B, 300B, 310, 400B, (430, 530 both up to SN: 8297800), 500B, 600B, 630Replaces: VT3370, A30024 (0.815" O.D., .625" I.D., 1.000" length) USA madeNOTE: May have to shorten to 0.895" on some applications. See website for all applications.

MHS016 $38.50Clutch Throw Out Bearing fits: VC, VAC, 200B, 300B, 400B, (430, 530 both w/ dry clutch up to SN: 8191147), 511B, 630Replaces: VTA92, G10610 (1.750" center hole) NOTE: Carrier not included.

Clutch parts cont...Order # Price Description / Application

ABC3502 $38.45NEW! Clutch Disc fits: V, VA, VAC, VAI, VC, Replaces: A30291, A44512(9" O.D., 10 splines, 1-1/8" spline I.D., solid center)

CKS3497 $172.30

NEW! Pressure Plate fits: V, VA, VAC, VAI, VC, Replaces: A30576 (9" O.D.)

ABC1937 $36.10 Clutch Throw Out Bearing fits: Some 400 series, Late 430, 470, 480, 480B, 480C, 530, 570, 580, 580B, 580C, 700, 730, 770, 830, 870, Replaces: A7538, A144152(2.260" I.D., 3.650" O.D., 0.800" wide)NOTE: Visit our website for additional application & serial number information.

ABC2501 $20.40 Clutch Throw Out Bearing fits: 930, 1030, 1070, 1090, 1170, 1175, Replaces: A58982(2.490" I.D., 4.060" O.D., 0.870" wide)NOTE: Sealed bearing, no need to grease.

ABC1955 $1.75 Clutch Housing Drain Plug Gasket / Washer fits: 430, 530 both SN: 8262800 & up, Some 470 - 4890, Replaces: A51759(0.750" I.D., 0.058" thick, 0.973" O.D.)NOTE: Made of nylon.

ABC412 $6.50 Clutch Alignment Tool fits: S, SC both up to SN: 5600000 (1-3/8" spline dia., 10 splines, .675" pilot dia.) USA madeNOTE: Check clutch spline dia. before ordering.

ABC1630 $7.95 NEW! Hand Clutch Throw Out Fork Shaft Seal fits: DC, (Early LA), (SC Hand & Foot Clutch), Replaces: O5686AB, A26849 (1.000" I.D., 1.503" O.D., 0.250" wide) NOTE: 1 to 2 used per tractor; Sold individually. See website for additional applications.

Transmission partsOrder # Price Description / Application

CKS2968 $48.85 Case-O-Matic Direct Drive Transmission Lever w/ Roll Pin fits: 300B - 614BReplaces: G1085 (lever), B138-82 (roll pin) USA made NOTE: Bare aluminum.

ABC1628 $14.95 NEW! Transmission Input Front Main Shaft Seal fits: VA, VAC, (310 through 420C crawler), Replaces: VT4970, D33872(1.187" I.D., 2.004" O.D., 0.250" width)

Ch

assis parts


















Cas

eC

has

sis

par

tsKnobs, boots


JDS586 $7.70 Knob (For Shift, Hydraulics, Seat Adjuster) fits: D, DC, LA, S, SC, VC, VAC, 400, 425, 500, 600, 700, 730, 800, 830, 900, 930, 1030, Replaces: A23885, O3501AB, VT2018(1.71" dia., 3/8"-24 NF) NOTE: Bakelite. See website for complete apps.

ABC085 $4.50 Knob (For Shift, Shuttle & Range Levers) Fits: 200B, 300B, 400B, 430, 530, 630, 730, 830, 470, 570; Industrials: W3, W5, W5A, 480, 480B, 580, 580B, 680C, 680E, 310B, 584, 585, 586, W9; Crawlers: 350B, 310G, 750, 1000, Replaces: A26727(1.985" dia., 3/8"-24 NF) NOTE: Bakelite.

ABC3326 $8.75Range / Shuttle Lever Seal fits: 200B - 630, Replaces: O4244AB, A26778, G105700 (0.625" I.D., 1.128" O.D., 0.250" wide) NOTE: See website for all applications.

ABC362 $5.50 Hydraulic Remote Lever Knob fits: 430, 530, 470, 570, 480, 480B, 580, 580B, 680B, 780, W5A, W7, W9A, W10, W12, W24, W24B, 730, 830, 930, 1030 (All Comfort Kings), Replaces: A14051; (For Range Transmission Shifter), A32845(3/8"-24 NF, 1.250" O.D.) NOTE: Bakelite.

ACS130B $9.95 Gear Shift Boot Fits: D, S, VC, VA series; 400, 420, 425, 700, 800, Replaces: VT2017, O4867AB, O5920AB (5/8" hole dia.,1-3/4" bottom I.D.) NOTE: Rubber.

CKS084 $8.95 Gear Shift Boot fits: 200B, 300B, 400B, 430, 470, 480, 480B, 500B, 530, 570, 580, 580B, 600B, 630, 730, 830, 930, 1030Replaces: A26956, A57876 (9/16" hole dia., 1-3/4" bottom I.D.) NOTE: Rubber.

CKS130 $24.95Steering Column Boot fits: 770, 870, 970, 1070, 1090, 1170, 1175, 1270, 1370, 1570, 2470, 2670, 2870, 4690, Replaces: A61910

Steering wheels, partsOrder # Price Description / Application

CKS115 $63.25Steering Wheel fits: Early D, S series, L SN: 4402720 & up, RC SN: 4300000 & up Replaces: O4935AB, 1995AA (17" dia., keyed & tapered hub, 7/8" - 1" shaft, 3 double spokes)

CKS074 $49.50 Steering Wheel fits: DC, SC, VA, VAC, VAH, VAI; Also fits RC SN: 430000 & up when using a 17-5/8" 3 spoke wheelReplaces: A7668, O7779AB (17-5/8" dia., keyed & tapered hub, 7/8" - 1" shaft,3 spokes)

Steering wheels, parts cont...Order # Price Description / Application

ABC2008 $12.50 NEW! Steering Drop Arm Shaft Side Sector Seal fits: D, DC, DH, DO, DV (All SN: 4402685 & up), Replaces: A26777(1.375" I.D., 2.110" O.D., 0.315" wide)

CKS110 $63.25 Steering Wheel fits: LA, 500, 520, 600, 610, 620; Serviceable for 900 up to SN: 8141036, Replaces: O7778AB, A11454(19-3/4" dia., 4 bare spokes, 7/8 - 1" shaft)

CKS066 $49.50 Steering Wheel fits: V, VC, VI, VO; Serviceable for VA, VAC, VAH, VAI when 16" dia. wheel is desiredReplaces: VT2230, VT4051(16" dia., keyed & tapered hub, 7/8"-1" shaft, 3 spokes)

JDS519 $14.95 Steering Wheel Acorn NutServiceable for C, D, L, RC, S, VA, VC series, Early: 200B - (900 up to SN: 8141036), Replaces: A8744(3/4"-16 NF x .859" tall)NOTE: Stainless steel.

CKS087 $49.50 Steering Wheel fits: (Early 200, 200B, 300, 300B, 400B, 500B, 600B series), 400 Row Crop series, 700 series, 800 seriesReplaces: A7668 (17-3/4" dia., keyed hub, 7/8" - 1" tapered shaft, 3 COVERED TO CENTER spokes) NOTE: See website for serial number breaks.

CKS080 $69.95 Steering Wheel fits the following tractors w/out exposed steering cylinders or all manual steering: 200B; 300B, (400B SN: 6120001 & up); 320, 420, 430, 470, 500B series (SN: 6120001 & up), 510B, 511B, 530, 570, 600B series (SN: 6120001 & up), 610B, 611B; 630, 730 EXCEPT early Grove; 830 EXCEPT early Grove, 930 series Comfort King; Western Special SN: 8258382 & up); 1030 Comfort King & Draft-O-Matic (All w/ Power steering motor directly under the radiator, Replaces: A20456 (18" dia., splined hub, 40 splines, 3 COVERED TO CENTER spokes) NOTE: Check spline count before ordering.

FDS424 $6.50NEW! Steering Column Grommet Fits: 200B, 300B, 400B, 430, 500B, 530, 600B series, Replaces: G10742(3" O.D., 1-1/4" hole I.D.)

JDS564 $13.45Power Steering Plate (For CKS087) Replaces: A8248NOTE: Stainless steel. Visit our website for additional serial number breaks.





https://www.steinertractor.com/ACS130B














Case


CKS058 $31.75 Steering Wheel Center Emblem (For CKS080, CKS090)Replaces: A20475, A38785NOTE: Plated, background painted.

CKS1125 $29.95 Steering Sector Pin Stud fits: 200B, 300B, 350, 351, 400B, (Series 430, 530 both up to SN: 8199596 & SN: 8201862 - 8209856 w/ manual steering), 500B, 600B, 630 series Replaces: A40907 (presses into G13287 or G13412 sector) (1.437" o/a length, taper .375" - .550" dia., .390" tall taper, .499" dia. where presses into sector, .721" flanged base dia.) USA made NOTE: 3 used per tractor; Sold individually.

JDS3366 $14.95 NEW! Steering Worm Shaft Race Fits: 200B, 300B, 351, 400B, (430 up to SN: 8199596) 500B, (530 up to SN: 8199596), 600B, 630, Replaces: G10726, G15216(1.717" O.D., 0.935" center hole dia., 1.499" I.D., 0.328" wide) USA made NOTE: 2 used per tractor; Sold individually.

ABC2962 $8.35 NEW! 11-pc. Steering Worm Shaft Ball Kit Fits: 200B, 300B, 351, 400B, (430 up to SN: 8199596), 500B, (530 up to SN: 8199596), 600B, 630, Replaces: 211-9, VT4905, 86642304 (5/16" chrome steel, Grade 25)USA made NOTE: 28 used per tractor. Must order 3 kits.

CKS090 $95.00 Steering Wheel fits: 430 SN: 8262800 & up, 470 SN: 8656925 & up, 530 SN: 8262800 & up, 570 SN: 8656925 & up, 1200, 1470 (All w/ hydrostatic steering) Replaces: A35602, A167345 (18" dia., splined hub, 36 splines, 0.875 dia. shaft) NOTE: Hydrostatic = Orbit motor directly under wheel. Check spline count before ordering.

CKS096 $49.95 Steering Wheel Center Emblem (For CKS080, CKS090)Replaces: A35603 NOTE: Black background w/ chrome "3 eagle".

CKS126 $73.50 Steering Wheel fits: 480, 480B, 480C, 480D, 480LL, 580, 580B, 580C, 580D, 580F, 580G, 580H, 584, 584C, 584D, 585, 585C, 585D, 586C, 586D, 680, 680B, 680C, 680E, 680G, 680H, 770, 780, 780B, 870, 970, 1070, 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2096, 2290, 2294, 2390, 2394, 2470, 2590, 2594, 2670, 2870, 3294, 3394, 3594, 4490, 4690, 4890; The following Magnums w/ covered spoke steering wheel: 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950Replaces: A61007, A65544, A164267(15-1/4" dia., 36 spline, 13/16" shaft)


IHS685 $2.95 Steering Wheel Nut fits: D, L, S, V series, some 430, 500, 530 w/ manual steering, 600, 730, 830; 900 SN: 8141036 & up, 930 Draft-O-Matic; Also fits same as CKS080 Replaces: 25-1512 (3/4" - 16 NF x .444" tall)

ABC504 $5.50 Steering Wheel Nut fits: Late 430, 530, 470 (All w/ hydrostatic steering orbit motor); 480 - 2870, 1090 - 4890, Replaces: A14567, F19646 (13/16"-20 NEF)

MFS114 $59.95 Steering Wheel fits: David Brown 770, 780, 880, 885, 990, 995, 996, 1200, 1210, 1212, 3800, 4600, Replaces: K83746, K914001 (17-5/8" dia., keyed tapered hub, 11/16" - 13/16" shaft, 3 COVERED TO CENTER spokes) NOTE: Black. Customer can paint white if desired.

MIS103 $12.50

Steering Wheel Spinner Fits: Case modelsNOTE: Aluminum.

CKS1597 $14.95 Steering Wheel Spinner Knob only Fits the following w/ double spoke steering wheel: Early D, DC, S, SC seriesReplaces: 04995AB, A26845NOTE: Rubber.

Power steering partsOrder # Price Description / Application

ABC1233 $385.00 Belt Driven Power Steering Pump (For tractors using Eaton style pump) Fits: Case models, Replaces: Eaton P761, 20928, 503-1003, 503-1005-005NOTE: For 5/8-18" male inverted flare pressure line. Can be adapted to tractors using Char-Lynn power steering w/ Eaton pump. Does not include brackets, reservoir or pulley.

ABC3275 $18.50 10-pc. Eaton Power Steering Pump Seal & O-Ring Kit fits: 300 - 1030 (All w/ Eaton belt driven power steering pump)NOTE: See website for all applications. Includes filter o-ring. Fits ABC1233.

ABC3277 $12.50 Power Steering Pump Filter fits: 300 - 1030; David Brown: 770 - 885, Early 990 - 1212 (All using separate reservoir)Replaces: Case: A42242; David Brown: K902187, K960750 (1.020" I.D., 2.990" O.D., 1.610" thick) USA madeNOTE: Check website for additional application information. Reservoir gasket / o-ring not included.

Power steering parts continue on next page

Ch

assis parts


















Cas

eC

has

sis

par

tsPower steering parts cont...


ABC1417 $37.95Power Steering Pump Pulley Fits: Case models (5" O.D., 0.675" bore, 1/8" keyway, 0.9715" total width for 1/2" belt) USA made

ABC1414 $48.75 Power Steering Pump Port BlockFits: Case models w/ Eaton style pump w/ separate reservoirReplaces: Eaton 20925, AG33547A USA made

ABC1419 $4.95Bolt (For ABC1414), Replaces: Eaton 14126 USA madeNOTE: Yellow zinc; Grade 8.

IHS555 $885.00Char-Lynn Power Steering Torque Generator w/out port block Fits: Case models (7/8" shaft)

IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; Recommended Fluid Input - 3 to 4 GPM

IHS673 $69.95

Port Block only (For IHS555)USA made

ABC2507 $16.60 Steering Shaft Cross & Bearing (U-Joint) Fits: 200B - 530, Super 400 - 800, 730 - 1030, Replaces: VTA3227, A20435USA made NOTE: 1 to 4 used per tractor; Sold individually. See website for complete applications.

ABC380(Original)

$98.50

Char-Lynn Power Steering Slip Fit Coupler (For IHS555)ABC380: (3-3/8" to 3-1/2" adjustable length)

ABC497: (2-5/8" o/a length)USA made

ABC497(Economy)

$18.25

IHS740 $223.35 Power Steering Priority Flow Control Valve fits: Case models w/ LIVE hydraulics (1/2" NPT inlet, 3/8" NPT return, 1/2" NPT to remote cylinders)USA made NOTE: Eliminates belt driven pump, pulleys & brackets. Enables you to use your hydraulic pump to operate the power steering. Is preset at 1500 PSI & 8 gpm. Adjust to your application.

Tie rod bootsUniversal Tie Rod Boot Fits: Case models Specify size when ordering (Base x Height x Hole I.D.)

Order # Price Size

FDS336 $3.50 (1.200" base, .475" tall, .500" hole)JDS736 $4.30 (1.500" base, .735" tall, .550" hole)ABC371 $3.35 (1.300" base, .965" tall, .500" hole)FDS337 $3.99 (1.450" base, .600" tall, .550" hole)ABC368 $3.35 (1.675" base, .900" tall, .625" hole)ABC369 $2.95 (1.575" base, .600" tall, .650" hole)ABC370 $3.50 (1.800" base, .765" tall, .740" hole)

Seats, partsOrder # Price Description / Application

ABC445 $146.95 Universal Full Suspension Seat w/ Back Rest & 5-Angle Base (w/ Slide Track & Mounting Brackets) Fits: Case models NOTE: Can be adapted to fit many utility tractors & lawn mowers.

CKS125 $47.90Inner & Outer Seat Spring Set Fits: D, DC both up to SN: 8025739; DO, DV, S series up to SN: 8027114Replaces: O4256TF, B18211 (inner), O5948AB, A26962 (outer) USA made

IHS728 $39.95Seat Spring Coil fits: Some L, LA, V, VA, VAC, VAI, VAO, VC, VI, VO, 500, 600 Wheatland, Replaces: O8145AB(2-1/4" O.D., 4-3/4" tall)NOTE: Measure before ordering.

OLS038 $54.95 Rubber Seat Spring fits: VAC-14 (1953/54) when equipped w/ optional "Easy Ride" seat, Replaces: VTA3348NOTE: Does not include bushings. You must reuse old ones or purchase new ones. (2) pins stick up and are hidden underneath the seat's framework.

OLS149 $49.15 Seat Bushing Repair Kit fits: VAC-14 (1953-54) when equipped w/ optional "Easy Ride" seat, Replaces: V20455, V20456, V20459 (Largest bushing measures 1.010" O.D.) USA madeNOTE: Must ream/hone bushings when installed.

FDS336

JDS736 ABC371 FDS337 ABC368 ABC369 ABC370























Case

Seats, parts cont...Order # Price Description / Application

FDS299(LH)

$54.95 Rubber Seat Spring w/out Bushings Fits: 200B, 300B, 400B, (430 up to SN: 8312174), 500B, (Some 530 up to SN: 8312174), 600B, 630, (700, 800 Orchards only) (All w/ Easy Ride Seat & 1 exposed pin)FDS299 Replaces: G45003FDS300 Replaces: G45002NOTE: FDS299 & FDS300 do not come w/ bushings. You must reuse old ones or purchase our FDS477 kit

FDS300(RH)

$54.95

FDS477 $39.95Seat Bushing & Pin Kit (For FDS299, FDS300)NOTE: Bushings must be reamed/honed when installed.

CKS124 $99.99Rubber Seat Spring Assembly Fits: 400, 420, 425, 600, 700, 800, (730, 830 up to SN: 8253500), 900 (All except Grove / Orchard), Replaces: A7053NOTE: Must re-use old side plates.

CKS114 $99.95 Rubber Seat Spring Assembly Fits: 730CK, 830CK both SN: 8253501 & up; 930CK, 1030CK, 1200, 1470 (All except Grove / Orchard) (All w/ deluxe seat & flanged bushings)Replaces: A23947, A34676, A57714NOTE: Must re-use old side plates.

JDS533 $24.50 Seat Adjustment Handle fits: VAC-14, 200B, 300B, 320, 400, 400B, 420, 430, 470, 500B, 530, 570, 600B, 630 (All w/ "Easy Ride" seats), Replaces: VTA3341, G45001

ACS071 $32.95

Seat Back (Back Rest) Serviceable for VI, Replaces: 04946AB(10-5/8" x 5-5/8" curved) USA made

ABC3211 $44.50Shallow Seat Pan fits: CC, RC, VC, Serviceable for O1983AB(17-1/2" wide, 14" front to back, 3" tall, 1/2" single bolt hole) NOTE: Metal.

MIS2679 $34.75Orange Tractor Seat PadFits: 19" Pan (side to side)(Drawstring, 1-1/2" thick)USA made

MIS006AC $34.75Orange & White Tractor Seat PadFits: 19" Pan (side to side)(Drawstring, 1-1/2" thick)USA made

Seats, parts cont...Order # Price Description / Application

MIS3199 $40.50Orange Seat PadFits: 21" Pan (side to side) Replaces: VT3802, A27805(Drawstring, 1-1/2" thick) USA made

MIS3204 $40.50Orange & White Seat PadFits: 21" Pan (side to side)(Drawstring, 1-1/2" thick) USA made

MIS006BK $35.50Black Tractor Seat PadFits: 21" Pan (side to side)(Drawstring, 1-1/2" thick) USA made

Monroe® seat parts

The following seat parts fits: CC series, D series, S series when

equipped w/ Monroe® seat:


IHS030 $28.80 Seat Spring CoilIHS329 $34.50 Rear-Mounted Seat Shock Absorber

w/ BushingsIHS325 $2.05 Seat Bushing only (For horizontal bolt

hole)MHS046 $24.95 Seat Pivot Support Rod (4" wide)

USA made

Seat bearingFits: D, DC, S, SC (3/8" I.D., 1" O.D., 1-1/8" flange) USA made


Seat Bearing..........................................................ABC537 ............$14.30 (For Aftermarket Knoedler Seats)NOTE: 2 to 8 used per tractor; Sold individually.

ToolboxesOrder # Price Description / Application

CKS099 $43.60Toolbox w/ CASE Imprint fits: D, DC, DO, DV, (Late L), LA, RC, S, SC, SO, 400, 500, Replaces: 476AA, 2884AA

ABC472 $32.50Universal Toolbox Fits: Case models(4" wide x 16" long x 4-1/4" tall)

Ch

assis parts

FDS300FDS299

IHS030 IHS329 IHS325 MHS046











https://www.steinertractor.com/MIS006AC



https://www.steinertractor.com/MIS006BK









Cas

eC

has

sis

par

tsBelt pulley brake linings


CKS1876 $19.95Belt Pulley Brake Lining w/ 4 Rivets Fits: C, CC, R, RC seriesReplaces: O1742AB (lining); 151-178, 2561 (rivets) (2" x 2")

CKS1879 $19.95Belt Pulley Brake Lining w/ 4 Rivets Fits: D, DC series, LA series, 500, 900, 930 (All w/ hand clutch), Replaces: O6153AB(2-7/8" long x 1-7/16" wide)

CKS1882 $19.95Belt Pulley Brake Lining w/ 4 Rivets Fits: S, SC, SI, SO, L, LI (All w/ hand clutch), Replaces: O1412BB1 (lining),151-178 (rivets) (2-1/2" long x 2" wide)

Brake partsOrder # Price Description / Application

CKS129 $30.25

Brake Lining Kit w/ Rivets fits: VA, VO both w/ SN: 5554999 & up, VAC w/ band type brakes, Replaces: VTA3459(17-7/8" long x 1-11/16" wide x 0.200" thick)

CKS1592 $44.50Bonded Brake Disc fits: 200B, 300, 300B, 320, 320B, 350, 400B, 420B, 420BD, (430, 530 both up to SN: 6165269), 500B, 600B, 630, W3, W5, W5A, Replaces: A49127, G10738, G13019 (6" O.D., 2.245 spline I.D., 17 spline, .550" disc thickness) USA madeNOTE: 4 used per tractor; Sold individually.

ABC438 $21.95 Bonded Brake Disc fits: LA, 400 - 415 series, 500, 600, 610, 700 - 715B, 730, Early 770 up to SN: 8282416, 800 - 815B series, 830, 870 up to SN: 8675001, 900B, 910B, 930, 930CK, 970 up to SN: 8675001, 1030Replaces: A40794, A44712, 3973AA, 1975466C1 (7" dia., 24 splines, 3-1/8" spline I.D.) NOTE: 4 used per tractor; Sold individually. See website for more applications.

IHS823 $4.95 Actuating Spring (For Disc Brakes) Fits: Late D & LA series, 400, 500, 700, 730, 770, 800, 830, 900, 930, 940, 1030Replaces: O8780AB, A30897, A41816(1.209" o/a length, 0.105" wire dia., 0.761" O.D.) USA made NOTE: 6 used per tractor; Sold individually.

Brake parts cont...Order # Price Description / Application

ABC561 $7.50 Actuating Spring (For Disc Brakes) Fits: Late S, SC, SI, SO (All w/ disc brakes); 200B, 300, 300B, 350, 400B, (430, 530 both up to SN: 6165269), 500B, 600B, 630 Replaces: A30910, F19682, O9266AB(1.275" o/a length, .105" wire dia.)NOTE: 4 used per tractor; Sold individually.

IHS1136 $5.75NEW! Actuating Spring (For Disc Brakes) Fits: 1410, 1412, 1594, 1690, 1694Replaces: K963644 (1.095" o/a length, .825" O.D., .110" dia. wire) NOTE: Sold individually.

CKS1596 $46.45 Disc Brake Linings w/ Rivets fits: Some D, DC, DI, DO, DV SN: 4511449 - 5600000Replaces: 4048AA, O7205AB (8" O.D., 5" I.D.) USA made NOTE: Sold in pairs. 1 pair used per side - 2 pairs required per tractor. No returns if broken.

CKS1598 $39.95 Disc Brake Linings w/ Rivets fits: D, DC, DI, DO, DV SN: 5600000 & upReplaces: 4299AA, O7206AB(7" O.D., 4" I.D.) NOTE: Sold in pairs. 2 pairs used per side - 4 pairs required per tractor. No returns if broken.

CKS1601 $34.95 Disc Brake Linings w/ Rivets fits: Some VA, VAC, VAH, S, SC, SO (All w/ disc brakes), Replaces: 4298AA, A3010AA(6" O.D., 3.140" I.D.) NOTE: Sold in pairs. 1 pair used per side - 2 pairs required per tractor. If lining is bonded rather than riveted, customer must drill rivet holes. No returns if broken.

ABC3203 $15.50 NEW! Differential Brake Shaft Carrier Oil Seal fits: VA, VAC series, Replaces: VT3465(2.250 I.D. x 3.256" O.D. x 0.375" wide)NOTE: 2 used per tractor;Sold individually.

CKS2647 $2.00 Disc Brake Ball fits: D, DC, DO, DV SN: 5201270 & up, (LA SN: 5418607 & up), 400, 500, 600, 700, 730, 800, 830, 900, 930, 1030Replaces: 211-1020, 211-15, O8296AB(5/8" dia.) USA made NOTE: Steel. Sold individually.

ABC1225 $2.35 Disc Brake Ball fits: S, SC, SO (All w/ SN: 5600000 & up); 200B, 300B, 300 series, 310, 350, 351, 400B, (430, 530 up to SN: 6165269), 500B, 600B, 630 series & 1410 - 1694 David Brown, Replaces: BDB78, 211-19, 211-221, 211-1028, 211-1328 (7/8" dia.) NOTE: Steel. Sold individually.

















Case

Brake parts cont...Order # Price Description / Application

ABC2713 $2.50 Disc Brake Ball fits: 430 SN: 6165269 & up, 470, 480, 480B, 480C, (530 SN: 6165269 & up), 570, 580, 580B, 580C, (770 SN: 8682416 & up), 870, 970, 1070, 1175 Replaces: A42043 (1" dia.)NOTE: Steel. Sold individually.

CKS107 $11.95

Brake Boot fits: D series SN: 4511449 - 5600000, Replaces: O7211AB(2.245" O.D.

CKS105 $9.95 Brake Boot fits: D series SN: 5600001 & up, LA SN: 5418607 & up, S series SN: 5600001& up, 400 series except Orchards, 500 series, 600 series, 700, 730, 770, 800, 830, 870, 900, 930, 940, 970, 1030, 1070, (1175 SN: 8715247 & up) Replaces: O8762AB, A27465 (2.675" O.D.)

ABC2008 $12.50Brake Shaft Seal fits: D, DC (All up to SN: 4511449 & w/ independent drum brakes)Replaces: A26777 (1.375" I.D., 2.110" O.D., 0.315" wide) NOTE: 2 used per tractor; Sold individually.

ABC1565 $13.25 NEW! Brake Shaft Seal fits: D, DC, DO, DV (All w/ SN: 4511449 - 5600000 & independent disc brakes)Replaces: A27130(2.750" I.D., 3.756" O.D., .438" wide)

MIS1131 $33.95 Brake Riveting Tool Kit (1-1/4" deep throat, 1/8" dia. rivet punch) NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Not for use w/ deep recess shoes.

MIS2547 $89.95Riveting Tool (For brake shoe & disc relining for most tractors & clutch pulley brake lining) (3-3/8" deep throat x 2-1/8" high throat) USA madeNOTE: Includes (2) punches.

Hydraulic partFits: 300B - 1175, Replaces: A11507(0.875" I.D., 1.379" O.D., 0.250" wide)


Draft Control or Case-O Matic Spool Seal .........ABC1514 .......$8.95NOTE: See our website for more applications.

PTO partsOrder # Price Description / Application

CKS002 $76.50

PTO Driven Gear fits: VA, VAC, VAI, VAO, Replaces: A29384, VT4021NOTE: 38 teeth.

CKS003 $32.50PTO Drive Gear fits: VA, VAC, VAI, VAO Replaces: A29385, VT4022 (10 splines)NOTE: 14 teeth.

CKS1257 $136.90 PTO Drive Gear fits: 200B, 300B, (310G SN: 3039619 & up), 320B, 350, 350B, 420B, 420BD, 430, 470, 480, 530, 570, 580Replaces: G10675 (15 splines)NOTE: 14 teeth.

ABC1543 $14.35PTO Shaft Seal fits: VA - 630 (All w/ standard non live PTO) Replaces: VT3520, G13803(1.375" I.D., 2.378" O.D., 0.312" wide)

ABC3396 $16.50 NEW! Independent PTO Clutch Drum Housing Seal fits: 300B, 310B, 400B, 410B, (430, 530 series both up to SN: 8650134), 500B, 600B, 630, Replaces: G13814(1.375" I.D., 2.839" O.D., 0.313" wide)NOTE: 1 used per tractor.

ABC3326 $8.75 PTO Shifter Seal fits: VA, VAC; 200B - 630 (All w/ standard (not live) PTO)Replaces: O4244AB, A26778, G105700(0.625" I.D., 1.128" O.D., 0.250" wide)NOTE: See website for all applications.

ABC1630 $7.95 NEW! Independent PTO Lever Cross Shaft Seal fits: 430, 470, 480, 530, 570, 580, 630, Replaces: A26849, G13818(1.000" I.D., 1.503" O.D., 0.250" wide)NOTE: 1 used. See website for additional applications.

ABC387 $7.55

PTO Output Shaft Seal fits: 310 - 420 series Crawlers, Replaces: 23033(1.375" I.D., 2.000" O.D., 0.337" wide)

ABC1550 $15.40 PTO & Pump Drive Shaft Inner Seal Fits: 700, 800, (730, 830 both up to SN: 8173401), Replaces: A28238, O10876AB(1.375" I.D., 2.254" O.D., 0.312" wide)USA made

IHS1545 $17.85Belt Pulley Shaft Seal fits: Terra Trac, 310 - Early 310G Crawler, Replaces: 40634(1.375" I.D., 2.506" O.D., 0.372" wide)NOTE: Narrower than original.

PTO parts continue on next page

Ch

assis parts





















Cas

eC

has

sis

par

tsPTO parts cont...


CKS1963 $56.50 PTO Shield w/out Mounting Plate Fits: D series, Late L, LA, R series, S series, VA series, 200B, 300B, 400B, 430, 470, 480B, 500, 500B, 530, 570, 580B, 600, 600B, 630, 900 (All w/ & w/out live PTO)Replaces: O8303AB, A27335, B555AA, 2172AA

CKS1967 $28.50 Mounting Plate (For PTO Shield) Fits: D series, Late L, LA, R series, S series, 200B, 300B, 400B, 430, 470, 480B, 500, 500B, 530, 570, 580B, 600, 600B, 630, 900 (All w/ & w/out live PTO)Replaces: O5386AB, VT2297, G16775USA made

CKS2630 $24.50 Mounting Plate (For PTO Shield) Fits: VA, VAC, VAH, VAI, VAO, VASReplaces: VT-2297 USA made

ABC2553 $88.50 PTO Shield fits: 310, 310C, 310D, 310E, 310F, (310G up to SN: 3039618), 320, 420, 420B, 420C, Terra-Trac, Replaces: 23040USA made NOTE: Bare metal.

MIS118 $48.50 PTO Over-Running Clutch (1-1/8" Female) fits: Tractors up to 75 horsepower, Replaces: Hub City C670F(1-1/8" - 6 x 1-3/8", 6 spline)

MIS138 $62.35 PTO Over-Running Clutch (1-3/8" Female & Male) fits: Tractors up to 75 horsepower, Replaces: Hub City C660F (1-3/8" - 6 x 1-3/8", 6 spline)

Front wheel hardwareOrder # Price Description / Application

ABC399 $2.00 Front Wheel Lug Bolt fits: VAI, 200B, 300B, 320, 400B, 420, 430, 500B, 530, 600B, 630, W3, Replaces: O4557AB (1/2" - 20 NF, 1" thread length, 13/16" hex head) NOTE: 6 used per rim; Sold individually.

CKS1795 $22.95 Front Wheel Bearing Kit fits the following using G1086 or G13065 6 lug front hub (not for H.D. axle): 200B, 211, 300B, 301, 310, 311, 400B, 411B, 430, 470, 530, 570 NOTE: 2 used per tractor; Sold individually. Bearings only are USA.

ABC255 $19.75 Front Wheel Clamp Lock Nut (For Axle Shaft & Front Wheel) fits: C, CC, D, DC, DI, DO, DV, RC, S, SC, SI, SO; 430, 530 when using G45291 hub (1"-14 UNF thread) NOTE: No re-threading necessary on worn shafts. Check thread size before ordering.

Front wheel hardware cont...Order # Price Description / Application

ABC254 $20.50 Front Wheel Clamp Lock Nut (For Axle Shaft & Front Wheel) fits: V, VA series - 600B; 430, 530 w/ hub G13065(3/4"-16 UNF thread) NOTE: No re-threading necessary on worn shafts. Check size before ordering.

Front wheels / rimsNOTE: To determine the width of Wheels / Rims: Measure

the inside (bead to bead) not outside to outside. See page

352B.


WHS033 $77.30Front Wheel (3 Welded Lugs) Fits: VAC series, Serviceable for VT3584(3" x 15") NOTE: Does not have original look.

WHS019 $72.95Front Wheel (6 Lug) fits: Some 200B, 211B, (430 up to SN: 8262800)Replaces: G10661 (3" x 15", 4-5/8" pilot hole, 3" bolt on c.c., 3-1/4" back spacing) USA made NOTE: Tricycle only.

WHS022 $73.50 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some Late VA - 830 series, Replaces: G10660, G57005, V13830, VTA1303 (4.5" x 16", 4.625" pilot hole, 6" bolt circle, 4" back spacing)USA made NOTE: For 5:50 x 6:00 x 16" tires.

WHS042 $70.75 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 430, 470, 480, 530, 570, 580, 580B & othersReplaces: A36743, G57007(6" x 15", 6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing) USA made

What is back spacing?To determine back spacing lay your wheel flat on the

ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8").











https://www.steinertractor.com/WHS033





Case

Order # Price Description / Size

WHS052 $83.75 Triple rib, 6 ply Tire only (For 3" x 15" Wheel) (5.00 x 15")

WHS053 $14.80 Tube only (For 4.00, 5.00, 5.50 x 15" Tires)WHS047 $94.95 Triple rib, 6 ply Tire only (5.50 x 16")WHS048 $105.75 Triple rib, 4 ply Tire only (6.00 x 16")WHS049 $110.95 Triple rib, 6 ply, Tire only (6.50 x 16")WHS050 $15.25 Tube only (For 5.50, 6.00, 6.50 x 16" Tires)WHS060 $37.95 Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires)WHS059 $53.75 Rear Tube only (For 11.2, 12.4 x 24" Tires)WHS058 $56.55 Rear Tube only (For 11.2, 12.4 x 28" Tires)WHS061 $80.25 Rear Tube only (For 13.6, 14.9 x 28" Tires)WHS062 $56.95 Rear Tube only (For 9.5 x 32" Tires)WHS063 $66.95 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires)WHS064 $65.25 Rear Tube only (For 11.2, 12.4 x 38" Tires)WHS2513 $89.95 Rear Tube only (For 12.00, 13.00, 13.6, 14.00, 14.9,

15.5 x 38" Tires)

Tires, tubes, valvesTubes are for BIAS ply tires only, not for radial tires. Also not for recreational use.

Need a tire or tube that is not listed? Call our technical service department.Tires, tubes, valves, nut are sold individually.


ABC531 $5.15 Rear Tire Inner Tube Valve (Air / Water Valve) (New Style) fits: Tractor tubes w/ Internal threadsNOTE: Sold individually.

ABC384 $5.15 Rear Tire Inner Tube Valve (Air / Water Valve) (Old Style) fits: Tractor tubes w/ External threadsNOTE: Sold individually.

ABC385 $1.50Brass Nut (For Rear Tire Inner Tube Valve)

Front wheels / rims cont...Order # Price Description / Application

WHS043 $82.75Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 430 - 1175 & others, Replaces: G45291, G57046(6" x 16", 4.625" pilot hole, 6" bolt circle, 4-3/4" back spacing) USA made

Ch

assis parts

Front wheels / rims cont...Order # Price Description / Application

WHS070 $86.45Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 730 - 1175 seriesReplaces: A57879(8" x 15", 4.625" pilot hole, 6" bolt circle, 4-3/4" back spacing) USA made

Rear rim hardwareOrder # Price Description / Application

MIS063 $3.75Rear Rim Bolt Assembly w/ Nut (For tractors w/ stamped steel center dishes) fits: 24 & 28" Rear Rims - WHS002, WHS004, WHS012, WHS013, WHS016 applications (5/8 x 18 x 2-1/2" NF Carriage bolt) USA made NOTE: 4 to 6 used per rim; Sold individually.

MIS121 $0.50

Flat Washer (For MIS063) (5/8" I.D.) NOTE: 4 to 6 needed per wheel; Sold individually.

ABC397 $2.85Rear Rim Lug Bolt fits: 200B, 300B, 320B, 400B, 420B, 430, 470, 480, 500B, 530, 570, 580, 600B, 630, W3(All w/ stamped steel dish), Replaces: 030739HT (9/16" x 18 NF, 1-1/8" thread length, 7/8" hex head)USA made NOTE: Sold individually. Can also be a front rim lug bolt on some applications.

























Cas

eC

has

sis

par

tsRear rims / wheels - USA madeNOTE: To determine the width of Wheels / Rims: Measure

the inside (bead to bead) not outside to outside. See page

352B.


WHS002 $142.50 Rear Rim (4 Loops)Fits: Some 200B, 210B, 300B, 301B, 310B, 311B, 320B, 400BReplaces: G12006(10" x 24", 14" c.c. loops)NOTE: Use 5/8" bolts. Valve stem hole is on side closest to loops.

WHS027(9" x 28")

$278.75

Rear RimFits: VAC WHS027 Replaces: VT4323 WHS028 Replaces: VT5570(14-1/2" c.c. dimples)NOTE: Like original.

WHS028(10" x 28")

$278.75

WHS016(9" x 28")

$148.05

Rear Rim (6 Loops) Fits: 200 & upWHS004 Replaces: G12002WHS012 Replaces: G12003WHS013 Replaces: G45710

WHS004(10" x 28")

$159.00

WHS012(11" x 28")

$175.20

WHS013(12" x 28")

$179.95

WHS029(10" x 38")

$214.25 Rear Rim (Deep Drop Center) WHS029, WHS021: Fits: Some DC4, SC, Replaces: O7960AB

WHS018: Fits: Some CC, DC3, DC4, SC, SC3, SC4 & othersReplaces: O8203ABNOTE: Rims have 34" dia. center hole for cast centers & includes stop block except for WHS029. WHS029 does not include stop block, must reuse old.

WHS018(11" x 38")

$309.95

WHS021(14" x 38")

$339.95

Rear rims / wheels - USA made cont...Order # Price Description / Application

WHS036(12" x 36")

$297.60 Rear Rim (Double Bevel) WHS036: Fits: Some 300, 300B, 302, 312B, 350, 351, 511B, 611B, 630, others, Replaces: G45716, G46172 NOTE: 8 drive lugs total.

WHS035: Fits: Some 400 seriesReplaces: O10920ABNOTE: Has 18 drive lugs.

WHS037: Fits: Some 400, 700, 730, 800, 830, Replaces: A28272, O10922AB NOTE: Has 18 drive lugs.

WHS024: Fits: Some 700, 730, 800, 830, others, Replaces: A11081, A33223 NOTE: Has 18 drive lugs.

WHS035(10" x 38")

$282.95

WHS037(12" x 38")

$294.95

WHS024(14" x 38")

$305.20

WHS1613 $235.95 Flat Base Rear Rim (Blank Center) (For stamped steel 9 bolt pattern rims) fits: Case models(10" x 38") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet.

WHS046 $61.75

Reinforcing Ring (For 9 bolt pattern rim)NOTE: Repairs existing 9 bolt rim.

Rear spinout rims, partsNOTE: Stop holes are angled.


ACS028 $447.50

Rear Spinout Rim (4 Rails) Fits: Some 200B & upReplaces: G13266(11" x 28")USA made

ACS026 $460.50

Rear Spinout Rim (4 Rails)Fits: Some 430 - 570 series(12" x 28")USA made

WHS008 $477.00 Rear Spinout Rim (4 Rails) Fits: Some 200B - 570 series(13" x 28") USA madeNOTE: Stop holes are angled. Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108).

From a satisfied customer!

“Thank you for such a fast delivery! The cow tails were a hit. We all enjoyed seeing them when the kids opened up the package at the kitchen table! Thanks again.” - Bill V.





















Case

Rear spinout rims, parts cont...Order # Price Description / Application

MIS108 $18.75Rear Spinout Rim Stop (For 90 degree Drilled Rim Rail) fits: Case models Replaces: K917337 USA madeNOTE: Will not fit the rims that we sell.

MIS109 $14.99 Rear Spinout Rim Stop (For Parallel Drilled Rim Rail) fits: Case modelsReplaces: A9406NOTE: Use MIS109 for the listed spinout rims.

MIS110 $8.95 Stop Bolt (For Rear Spinout Rim Stops) Fits: Case models, Replaces: A9440, K200142, G15442 (2-5/8" o/a length)USA made NOTE: Sold individually.

Eagle hitch latch set, partsNOTE: This latch set is used to keep the implement /

equipment secured to the eagle hitch arms on your tractor.

Hook and unhook with the quick release without leaving the

tractor's seat.


CKS008 $124.50 4-pc. Eagle Hitch Latch Set fits: D series, S series, VA series, 200B, 300, 300B, 310, 310C, 320, 320B, 350, 400B, 420, 420B, 420BD, 420 Dozers, 425, 430, 500B, 530, 540, 600B, 630, 700, Early 730, 800, 830 Category 1 NOTE: Includes (1) CKS009, (1) CKS010, (2) CKS011.

CKS008 4-pc. Eagle Hitch Latch Set components

The following parts (Sold separately) fit CKS008 4-Pc. Eagle

Hitch Latch Set:


CKS009 $26.50 RH Lock only, Replaces: 6168A, A26241USA made

CKS010 $26.50 LH Lock only, Replaces: 6169A, A26242USA made

CKS011 $39.50 Latch only, Replaces: 6167A, A26240CKS3248 $6.95 Retainer Pin & Clips, Replaces: A27719

(pin), A27720 (retainer) (1.697" o/a length, 0.373" O.D.) USA madeNOTE: 2 used per tractor;Sold individually.

CKS1597 $14.95 Eagle Hitch Leveling Knob fits the following w/ eagle hitch: VAC - 830Replaces: O4995AB, A26845 NOTE: Rubber.

3-point hitch partsOrder # Price Description / Application

FDS023 $23.50 Top-Link (Category 1) Adjustable w/ forged ends & 3/4" hole Fits: Case models(16" tube length)

FDS346 $39.45 Top-Link (Category 2) Adjustable w/ forged ends & 1" hole Fits: Case models(16-3/4" tube length)

ABC1431 $1.90 3-Point Top Link Pin (Category 1)(3/4" O.D., 2-3/4" usable length, 4-5/8" o/a length)

ABC1427 $3.35 3-Point Top Link Pin (Category 1)(3/4" O.D., 4-3/4" usable length, 6-1/2" o/a length)

ABC1429 $4.25 3-Point Top Link Pin (Category 2)(1" O.D., 4-1/4" usable length, 6" o/a length)

MIS119 $0.50 3-Point Lynch Pin fits: Case models equipped w/ a 3-point hitch using a .420" dia. pin, Replaces: A33509(1-5/8" usable length)

Drawbar, partsOrder # Price Description / Application

FDS022 $45.95Standard Drawbar (Category 1) Fits: Case models(1" x 2-1/2" x 26", 7/8" pin size)

FDS211 $30.89

Drawbar Lock (Category 1) (For FDS022)

ABC1433 $2.15 3-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing fits: Case models w/ a Category 2, 3-point hitch switching to a Category 1 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length)

ABC2010 $24.00 Adjustable Stabilizer Bar (For tractors w/ Category I 3-point) Adjustable from 27-1/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually.

FDS024 $64.50Stabilizer Kit fits: 200B, 300B, 320, 400B, 420B, 430, 530 (bars only) Category 1Replaces: G16757 NOTE: Primed red. Flat bars not turnbuckles. Kit includes (2) arms, (2) brackets, pins.

Ch

assis parts

CKS009 CKS010 CKS011 CKS3248 CKS1597























Cas

e


DEC462 $12.50 Case (4" x 15)DEC464 $10.50 Case Eagle (6" tall)DEC060 $45.00 CDEC061 $45.00 CCDEC063 $41.00 DCDEC059 $45.00 L DEC062 $49.00 LADEC256 $49.00 RC (Gray tractor)DEC257 $49.00 RC (Red tractor)DEC067 $41.00 SDEC064 $41.00 SCDEC066 $41.00 VADEC065 $41.00 VACDEC261 $41.00 VCDEC339 $37.00 200 Triple RangeDEC307 $37.00 300 Triple RangeDEC262 $33.00 300 ScriptDEC263 $33.00 400 ScriptDEC380 $49.00 400 Script Super dieselDEC308 $37.00 400 Case-O-MaticDEC306 $65.00 500 diesel (Yellow)DEC340 $37.00 500 Triple RangeDEC264 $49.00 600 ScriptDEC309 $37.00 600 Case-O-MaticDEC310 $37.00 700 Dual RangeDEC311 $45.00 800 Case-O-Matic diesel

DEC462DEC065

DEC464

Mis

cell

aneo

us

Tips on applying our decalsAll decals are mylar unless otherwise noted. Have the pitted area filled, sanded smooth and painted. Paint must be completely dry prior to installation (usually 3 - 4 weeks). Wash area with soap & water (new paint included) on which decal is to be placed.

For mylar decals (film between lettering): Trim to border of design where possible prior to removing white backing paper. Lightly spray the area with window cleaner (do not use window cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, puncture with pin & smooth down. Please note: These decals have been printed on a tough mylar film using mylar ink. A pressure sensitive adhesive has been employed on the back of the mylar to insure good adhesion to any clean, hard surface.

For vinyl cut deals (no film between lettering) Special order only: Peel backing paper from decal. The decal will be stuck to the application paper. Align the decal using the design, not the application paper, and firmly press decal into place. Slowly remove the application paper starting at one corner. Please note: The colors are fused into the vinyl eliminating stacking. CAUTION: Inspect all decal pieces before applying to tractor.

NO REFUNDS on mylar decals if applied to surface and / or if damaged.

NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water.

Mylar decals

DEC308

All decals are USA made.

How to paint a tractor videoUSA madeDemonstrates

the entire painting process including sanding, priming, body work, painting & decals.VID11D (DVD) • $24.95

Deluxe tractor umbrellasFour oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform.

ABC2372 • $192.80Orange Deluxe Umbrella w/ Brackets

ABC2362 • $192.80

White Deluxe Umbrella w/ Brackets

ABC2372 ABC2362

https://www.steinertractor.com/DEC462


























https://www.steinertractor.com/VID11D




Case

I & T Shop Service™ manuals - Printed in USAAn I & T Shop Service™ manual tells you how to take a tractor apart, how to

fix it and how to put it back together again. These are authentic manuals

that deal with repairs in the language of a mechanic with an easy to use

format. They include valuable information as to specifications, torques, etc.

illustrated by exploded views and photos. If you are in serious repairs or

restoration, you need an I & T Shop Service™ manual. It will offer many short

cuts and save you time!


C201 $34.95 J.I. Case Collection: C series, D, L, LA, R, S, V, VA series, 200B, 300, 300B, 350, 400 series, 400B, 500B, 600B, 700B, 800B

C202 $34.95 J.I. Case Collection: 430 series, 470, 500 series, 530, 570, 600, 630, 730 series, 830, 900B, 930, 1030 NOTE: Includes wiring diagrams for 730 - 1030 only.

C203 $34.95 J.I. Case Collection: 770, 870, 970, 1070, 1170, 1175, 1270, 1370, 1570 series gas, diesel; For the following David Brown diesels: 770, 780, (880 SN: 52100 & up), 885, (990 SN: 467870 & up), 995, 1090, 1200, 1210, 1212, 1410, 1412, 3800, 4600 NOTE: Includes wiring diagrams for Case 770 - 1570.

Operator manual reprints - Printed in USAAn operator’s manual (reprints only) sometimes referred to as the owner’s

manual is the manual that came with the tractor. It is the manual that was

given to the ultimate consumer by the manufacturer. It can be compared

to the manual you receive in the glove box of a new car. This manual gives

the owner-operator instructions, shift patterns, capacities (anti-freeze,

crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a very

useful and valuable tool in operating your tractor.

Service manual reprints - Printed in USAA service manual (reprints only) with wiring diagrams tells you how to take

the tractor apart, how to fix it and how to put it back together again. It is a

reprint of the manual that the factory furnished the dealer’s shop service

department, and was not sent or given to individual retail customers. It deals

with repairs in the language of a mechanic. Often times it includes valuable

information as to specifications, torques, etc. A service manual reprint will

offer many short cuts and save you time!


REP004 $44.99 D series (Service manual)REP2969 $18.95 L (Operator manual)REP005 $40.50 S series (Tractors & Engines) (Service manual)REP080 $40.50 VA series, VAC, VAE, VAH, VAO, VAS (Service manual)REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation,

operation, maintenance & trouble shooting information on the pump & torque generator.

Manuals, videosBuild your "how-to" library with us. Reprint manuals are a must for your classic

Case. View tutorials and most requested repair videos at SteinerTractor.TV

Parts manual reprintsPrinted in USA

A Parts Manual (reprint only) has exploded views of all parts on the tractor. With numbered pictures giving you great detail on assembly and disassembly. It also gives you a guide, with numbers, for ordering parts, and makes you seem much more informed when talking with a dealer. Many service manuals, after telling you how to disassemble & repair in detail, will simply say "reassemble". If you have your PTO in the wash tank, in pieces, without notes, you have a problem. The parts manual can help you out with an exploded view of the PTO unit, and you can see immediately how it all goes back together. You need a parts manual!

REP1736 • $47.95For the following w/out Eagle hitch SN: 4511449 - 5600000: D, DC, DV

REP1738 • $49.95VA, VAC, VAC14, VAE, VAO

Miscellan

eous


https://www.steinertractor.com/C201



https://www.steinertractor.com/REP004







case case a brief history about case j.i. case company produced their first tractor in 1892. they...

Documents