pd-out/sp11...pd-out/mbk/g kit system network management capabilities web interface – used to view...
TRANSCRIPT
Data & Power
Power
Data
PD-OUT/SP11Outdoor PoE Lightning Surge Protector
Power Matters.™
PD-OUT/SP11 SpecificationsNo. of Ports 1
Pass Through Data Rates 10/100/1000 Mbps
Surge Handling Capability 10kv, 5kA to ground in 8/20 µs, 800v, 100A PoE
DC Input Input Power: 95W maximum Input Current: 2A max
Dimensions 30 mm (W) x 30 mm (H) x 190 mm (L) 1.18 in. x 1.18 in. x 7.48 in
Weight .6 lbs (270g)
Connectors Shielded RJ-45
Environmental Operating Ambient Temperature:Conditions -40º to 185ºF (-40 to 85ºC)
Operating Humidity: Maximum 95%, Non-condensing
Storage Temperature: -40º to 185ºF (-40 to 85ºC)
Storage Humidity: Maximum 95%, Non-condensing
Reliability MTBF: 400,000 hrs. @25ºC
Warranty 1-year
Regulatory REACH, RoHS, WEEE, IEC60529 levelCompliance IP66, NEMA 250, level 4x
Immunity to Surges IEC61643-21, GR1089, ITU-T K.45
Safety Approvals UL 497B
Overview
The PD-OUT-SP11 is a high quality surge protection device designed to
protect indoor Ethernet networks from lighting that may come from outdoor
environment through the Ethernet cable. The product is enclosed in a metal
weatherproof enclosure, meeting IP66. It can be easily mounted on a wall or
a pole. The SP device can be installed before the cable enters the building
to protect the indoor network or immediately adjacent to the wall- or pole-
mounted outdoor device (i.e. WLAN AP, IP Camera, etc).
PD-OUT/SP11 Features
• Supports data rates of up to 1Gbps
• Protects up to 10KV surge
• All eight lines protected including PoE
• Waterproof—IP66 rated
• UL Certified
• Can be wall or pole mounted
Indoor Ceiling-mountedPTZ Dome Camera
Switch
Indoor Main Building Outdoor
UPS
OutdoorWall-mountedSecurity Camera
SurgeProtector
SurgeProtector
PoE Midspan
OptionalSurgeProtector
OutdoorMidspan
OutdoorPole-mountedWLAN AccessPoint
ManagementStation
PD-OUT/SP11
©2014 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners.
MSC-PD-OUT/SP11 7.14
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions
for communications, defense & security, aerospace and industrial markets. Products include high-performance and
radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products;
timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing
devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-
Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso
Viejo, Calif., and has approximately 3,400 employees globally. Learn more at www.microsemi.com.Microsemi Corporate HeadquartersOne Enterprise, Aliso Viejo, CA 92656 USAWithin the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996email: [email protected] www.microsemi.com
Actual Size (when document viewed or printed at 100%)
The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi
and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this
document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply . This document and the information contained herein may not
be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or
conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights
must be approved by Microsemi in writing signed by an officer of Microsemi.
Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing
and should not be used in conjunction with life-support or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any
express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement
of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete
all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or
parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The
information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically
disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be
located on the web at http://www.microsemi.com/legal/tnc.asp
Ordering Information
Part Number Name Description
PD-OUT/SP11 PoE Surge ProtectorSurge protector for Ethernet networks with outdoor PoE midspans and powered devices.
PDS-102GO PoE Switch 2+1 outdoor switch, 30W per port , managed PoE, AC input
Power Matters.™
Overview
The PDS-102GO is an outdoor PoE switch. It enables the connection
of 2 powered devices to the network such as an outdoor WLAN,
outdoor IP Camera and outdoor P2P radio.
The switch is IP66 rated and can be installed in outdoor environments.
There is no need to open the unit during installation. Deployment is
simple and straight forward.
The PDS-102GO will deliver PoE power up to 30W per device. In
addition, it enables remote monitoring and control of the devices’
status, including remote reset.
The 102GO extends the reach between the switch and powered
devices by an additional 100m, to a maximum of 200 meters, a major
benefit in many applications.
The PDS-102GO offers lightning protection to the switch itself and to
the indoor network.
PDS-102GO Features
• 3ports–1datainput,2PoEoutputs
• Remotelymanaged–SNMPandweb
•Extendsnetworkreachbyadditional100m
• Outdoorrated:IP66
•Extendedtemperaturerange-40C,+65Cfor802.3af
•IEEE802.3atcompliant,30Wperport
•Supports10/100/1000Mbpsdatarates
• Includesintegralsurgeprotection
•Plug‘nPlayinstallation(installerdoesnothavetoopenunit)
PDS-102GO SpecificationsNo. of Ports 3
Pass Through Data Rates 10/100/1000 Mbps (half/full duplex)
Power over Ethernet Pin Assignment and Polarity:Output 1/2 (-) and 3/6 (+)
Output Power Voltage: 54VDC User Port Power: 30W per port, 60W total
Input Power Input Voltage: 100 to 240 VACRequirements Input Current: 2.0A
Dimensions 214 mm x 150 mm x 70 mm 8.42 in. x 5.90 in. x 2.75 in
Weight 2.09 lbs (950g)
Indicators No LED indicators
Connectors Shielded rugged RJ-45 (with gasket)
Environmental Operating Ambient Temperature:Conditions -40º to 122ºF (-40 to 50ºC) for 60W
-40º to 149ºF (-40 to 65ºC) for 30W
Operating Humidity: Maximum 95%, Non-condensing
Storage Temperature: –40º to 185ºF (–40º to 85ºC)
Storage Humidity: 10% to 95%, Non-condensing
Operating Altitude: Up to 6,560 ft. (2000 m)
Weather Rating: IP66, NEMA 4X
Reliability MTBF: 200,000 hrs. @25ºC
Thermal Rating 41 BTU/Hr (@240VAC)
Warranty 1-year
Regulatory Compliance IEEE 802.3at (PoE), RoHS Compliant, WEEE Compliant, CE
Electromagnetic FCC Part 15, Class BEmission & Immunity EN 55022 Class B
EN 55024, EN61000-4-5 Class 5 (6kV CM) VCCI
Surge Protection Meets Surge Protection as specified in GR-1089-CORE Issue 4 ITU-T K.20 6 kV on AC lines
Safety Approvals UL60950-1 & UL60950-22 GS Mark
Other Standards and Dust and water intrusion: IEC60529,Approvals Level IP66; NEMA 250
Outdoor WLAN AP
Data
AC Power
Data & Power
Outdoor Camera
Indoor
Outdoor
Ordering InformationPart Number Name Description
PDS-102GO/AC/M Microsemi 2+1 Outdoor Switch
3-port PoE Outdoor Switch
PD-OUT/MBK/G Microsemi OUT/MBK/G Mounting brackets for outdoor unit
Indoor
Outdoor
PDS-102GO
Switch AC Power
PDS-102GO PoE Outdoor Switch
©2014MicrosemiCorporation.Allrightsreserved.MicrosemiandtheMicrosemilogoaretrademarksofMicrosemiCorporation.Allothertrademarksand service marks are the property of their respective owners.
MSC-PDS-102GO5.14
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions
for communications, defense & security, aerospace and industrial markets. Products include high-performance and
radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products;
timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing
devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-over-
Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso
Viejo, Calif., and has approximately 3,400 employees globally. Learn more at www.microsemi.com.Microsemi Corporate HeadquartersOne Enterprise, Aliso Viejo, CA 92656 USAWithin the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996email: [email protected] www.microsemi.com
PD-OUT/MBK/G Kit
System Network Management Capabilities
WebInterface–usedtoviewunitPoE&Networkstatus,unitconfigurationandviewunitproductioninformation.
SNMPv2/v3–Monitorunitoverthenetwork(MIB-IIRFC1213),monitor/configureunitPoEcapabilities(RFC3621).
Telnet–usedtoviewunitPoE&Networkstatus,unitconfigurationandproductioninformation.Softwareupdate,Enable/DisablePoEfunctionality,pingremoteNetworkdeviceforconnectivitytest.
SNMPTraps–usedtoreportvariousPoEeventsasPoEPDinsertion/removal.
SysLog–usedtoreportPoEevents,Invalidremoteuseraccess,initialDHCPv4/v6address,etc.
Ethernet Switch Network Capabilities
10M/100M/1000MbitHalfDuplex/FullDuplexEthernetspeed.
8KinternalMACaddresslookupengine.
AutoMDIX
Jumbo frames
PoE Capabilities
IEEE802.3at–deliversupto30Wattsperport–Viewandstatues.
PoEEnable/Disable–Enable/DisablePoEportsPoweroutput(Ethernetdataisalwaysenabled).
WeeklySchedule–Automaticactivation/deactivationofPoEportsbasedontimeofday.
Remotedevicereset–TurningtemporarydevicepoweroffandbackonresetsattachedPDdevice.
Configuration Options
Webbased:ViaaWEBbrowser
SNMPv1/2c/3:ViaanSNMPmanagementapplicationonaremotecomputer
Telnet:ViaaTelnetapplicationonaremotecomputer
Security and User Authentication
Web,Telnet,SNMPv2,SNMPv3
PDS-102GO outdoor switch with outdoor mounting bracket
Management Capabilities