pct 3-lan topology
TRANSCRIPT
-
7/27/2019 Pct 3-Lan Topology
1/7
PRACTICAL 3
Aim: To create node to node connection using LAN trainer (Cisco Packet Trainer) then use
various network commands.
Theory:
Local Area Network: A Local Area Network (LAN) is a computer network that connects
computers and devices in a limited geographical area such as home, school, computer laboratory
or office building.
ARCNET, Token Ring and other technology standards have been used in the past,
but Ethernet overtwisted paircabling and Wi-Fi are the two most common technologies currently
in use.
Cisco Packet Tracer:
Cisco Packet Tracer is a powerful network simulator that provides virtual networking
environment.
-
7/27/2019 Pct 3-Lan Topology
2/7
Components of a Network:
Router:
A router is a device that forwards data packetsbetween telecommunications networks, creating
an overlay internetwork. A router is connected to two or more data lines from different networks.When data comes in on one of the lines, the router reads the address information in the packet to
determine its ultimate destination.
Router
Switch:
The term commonly refers to a multi-port network bridge that processes and routes data at
the data link layer(layer 2) of the OSI model. Switches that additionally process data at
the network layer(Layer 3) and above are often referred to as Layer 3 switches ormultilayer
switches.
Switch
http://en.wikipedia.org/wiki/Data_packethttp://en.wikipedia.org/wiki/Telecommunications_networkhttp://en.wikipedia.org/wiki/Internetworkhttp://en.wikipedia.org/wiki/Network_bridgehttp://en.wikipedia.org/wiki/Data_link_layerhttp://en.wikipedia.org/wiki/OSI_modelhttp://en.wikipedia.org/wiki/Network_layerhttp://en.wikipedia.org/wiki/Multilayer_switchhttp://en.wikipedia.org/wiki/Multilayer_switchhttp://en.wikipedia.org/wiki/Multilayer_switchhttp://en.wikipedia.org/wiki/Multilayer_switchhttp://en.wikipedia.org/wiki/Network_layerhttp://en.wikipedia.org/wiki/OSI_modelhttp://en.wikipedia.org/wiki/Data_link_layerhttp://en.wikipedia.org/wiki/Network_bridgehttp://en.wikipedia.org/wiki/Internetworkhttp://en.wikipedia.org/wiki/Telecommunications_networkhttp://en.wikipedia.org/wiki/Data_packet -
7/27/2019 Pct 3-Lan Topology
3/7
Hub:
An Ethernet hub, active hub, network hub, repeater hub orhub is a device for connecting
multiple twisted pairorfiber optic Ethernet devices together and making them act as a
single network segment. Hubs work at the physical layer(layer 1) of the OSI model.[1]
The
device is a form ofmultiport repeater. Repeater hubs also participate in collision detection,
forwarding a jam signal to all ports if it detects a collision.
Hub
Switch vs. Router:
Switches create a network whereas Routers connect a network. A router links computers to the
internet, so users can share the connection. A router acts as dispatcher, choosing the best path for
information to travel so it is received quickly.
Steps: 1 Switch 4 Terminal System
1. Start Cisco Packet Tracer (Simulator). Packet Tracer is a simulator which providesvirtual environment for learning network behavior.
2. Select Switch (4 ports)from Device-type selection box.3. Name the switch to LAN1.4. Make a virtual LAN network using a switch and 4 end terminals (End Terminals can be
PCs , Laptops etc.)
5. Configure the network by manually providing eitherClass A , B orC type IP Address.6. Check the network by pinging terminal itself and ping other terminals from anyone
terminal.
Screen shot on next page shows the steps:
http://en.wikipedia.org/wiki/Ethernet_over_twisted_pairhttp://en.wikipedia.org/wiki/Optical_fiberhttp://en.wikipedia.org/wiki/Ethernethttp://en.wikipedia.org/wiki/Network_segmenthttp://en.wikipedia.org/wiki/Physical_layerhttp://en.wikipedia.org/wiki/OSI_modelhttp://en.wikipedia.org/wiki/Ethernet_hub#cite_note-networkingtext-0http://en.wikipedia.org/wiki/Ethernet_hub#cite_note-networkingtext-0http://en.wikipedia.org/wiki/Ethernet_hub#cite_note-networkingtext-0http://en.wikipedia.org/wiki/Multiport_repeaterhttp://en.wikipedia.org/wiki/Jam_signalhttp://en.wikipedia.org/wiki/Collision_(telecommunications)http://en.wikipedia.org/wiki/Collision_(telecommunications)http://en.wikipedia.org/wiki/Jam_signalhttp://en.wikipedia.org/wiki/Multiport_repeaterhttp://en.wikipedia.org/wiki/Ethernet_hub#cite_note-networkingtext-0http://en.wikipedia.org/wiki/OSI_modelhttp://en.wikipedia.org/wiki/Physical_layerhttp://en.wikipedia.org/wiki/Network_segmenthttp://en.wikipedia.org/wiki/Ethernethttp://en.wikipedia.org/wiki/Optical_fiberhttp://en.wikipedia.org/wiki/Ethernet_over_twisted_pair -
7/27/2019 Pct 3-Lan Topology
4/7
Switch Port
1 Switch 4 Terminal LAN network
Screen shot displaying IP Address configuration:
Select a terminal following dialog box opens, where IP can be assigned.
-
7/27/2019 Pct 3-Lan Topology
5/7
Next Dialog box that opens is shown below:
Give IP Address to remaining terminals.
Pinging a terminal itself:
-
7/27/2019 Pct 3-Lan Topology
6/7
Pinging other terminals:
Result:
We have created node to node connection successfully using LAN trainer.
-
7/27/2019 Pct 3-Lan Topology
7/7