pci/isa dual pentium®iii sbc w/ video & dual ethernet
TRANSCRIPT
www.ibus.com
MicroprocessorDual Socket 370 Microprocessor socket for use with:• Intel® Pentium® III FC-PGA processors up to 850MHz• Intel® Celeron™ processors of 700MHz and beyond
Cache• Pentium® III: 256Kbytes Integrated L2 cache• Celeron™: 128Kbytes Integrated L2 cache
Chipset• Intel 440BX
Dynamic RAM• Three 168-pin DIMM sockets, 3.3V support PC100• Up to 768MB of Synchronous DRAM
BIOS Flash• single 512Kbyte Flash loaded into a 32-pin
PLCC socket
Watchdog Timer• Dallas Semiconductor DS1819A• Software controlled with reset capability
Ethernet Interface (Dual)• Dual 10/100BaseTx Ethernet channels (I/O panel)• Intel 82559ER controller
Video Interface• 69030 AGP Video with 4MB Memory• 1600 x 1200 x 64K Color in single display mode• Flat Panel support for TFT/STN panels
IDE and ATA Flash Disk• Dual IDE Interface up to 4 drives• Up to 64Mbytes of ATA Flash Disk
Hardware Monitor• National Semiconductor LM87 to monitor CPU
temperature, supply voltage and fan speed
Super I/O • SMC FDC37B788 super I/O• Real time clock• KB/mouse controller• Floppy disk interface• Printer port• USB port (I/O panel)• Two serial RS-232 ports
PMC Expansion• Support for optional PMC carrier board• IEEE1386 compliant
PCI/ISA Interface• PICMG 1.0 R2.0 compliant
Thermal Specification • Operating temperature
Celeron™ 366MHz: 0° - +59° CPentium® III 750MHz: 0° - +50° C
• Storage temperature : -40° - +85° C• Non-condensing Relative Humidity : <95% at 40°C
Power Requirements• Single Celeron™ 366 MHz 32MB RAM
(+5V@ 2.7A) (+12V@ 60mA) (+3.3V@ 2.0A)• Dual Pentium® III 750MHz 256MB RAM
(+5V@ 6.5A) (+12V@ 120mA) (+3.3V@ 3.1A)
09-13-05 Rev. C
ElecticRAY-CEL366SBC with Celeron™ 366MHz w/dual Ethernet and SVGA
ElecticRAY-CEL700SBC with Celeron™ 700MHz w/dual Ethernet and SVGA
ElecticRAY-P700SBC with Dual Pentium® lll 700Mhzw/dual Ethernet and SVGA
ElecticRAY-P850SBC with Dual Pentium® lll 850Mhzw/dual Ethernet and SVGA
Memory OptionsSDM-64MB 64MB RAM SDM-128MB 128MB RAMSDM-256MB 256MB RAMSDM-512MB 512MB RAMSDM-768MB 768MB RAM
SpecificationsOrdering Information
ElecticRayPCI/ISA Dual Pentium®III SBC w/ Video & Dual Ethernet
ElectricRayPCI/ISA Dual Pentium®III SBC w/ Video & Dual Ethernet
www.ibus.com
The ElectricRay is a high performance PCI/ISA Single Board Computer designed to support single Intel CeleronTM or dual Pentium® III processors operating up to 850MHz. The ElectricRay supports up to 768Mbytes ofSDRAM and up to 64MB ATA-Disk Chip for program and data storage. Additional features include AGP Video,dual 10/100 Base-TX Ethernet, and PMC expansion. The ElectricRay supports a full set of standard peripheralssuch as IDE, floppy, RS-232 serial ports, parallel port, USB, keyboard and mouse. Other industrial features are;serial port console redirection, battery backed real-time clock, CPU temperature monitors, and watchdog timer.
The ElectricRay front plate connectors include AGP Video, Dual Ethernet, PS/2 Keyboard/Mouse, and USB.PMC expansion is accomplished with an adapter board that elevates the PMC front plate to the next slot. Thehigh performance of the ElectricRay makes it the ideal solution for applications which require Dual Pentium® IIIprocessors in a rugged PCI/ISA form factor.
© I-Bus Corporation 2005. Technical information is subject to change. Actual system and component specifications may differ. Contact your local I-Bus representative for more details.
European Headquarters
I-Bus UK LtdUnit 6, Chichester Business Park City Fields Way, Tangmere West Sussex, PO20 2LB, UKTel: +44 (0) 1243 756300Fax: +44 (0) 1243 756301Email: [email protected]
France, Italy
I-Bus FranceB.P 45 Valbonne06901 Sophia Antipolis CEDEXFranceTel: +33 (0) 493 004 360Fax: +33 (0) 493 004 369Email: [email protected]
Worldwide Headquarters
I-Bus Corporation3350 Scott Blvd, Building 54Santa Clara, CA 95054United StatesPhone : +1 (408) 450-7880Fax : +1 (408) 450-7881Toll Free: 877-777-IBUSEmail: [email protected]
For Further Information
ElectricRay Functional Block Diagram