patchamp
DESCRIPTION
As soluções tenologicas da PATCHAMP economizam no tempo de realização dos Projetos e Instalações, além de máo de obra e materiais, que ao final se traduz em dinheiro. Facilmente aplicada em projetos de Audio Analogico, AES com DolbyE, Video SD-SDI, HD-SD, 3G, Analogico, sinais DVB-ASI, alem de DAs e Patching. Navegue no book e verifique como realmente você pode economizar.TRANSCRIPT
PATCHING & DISTRIBUTION TECHNOLOGY
PA3200Lite Patchable Distribution Amps•Up to 32 1-in by 5-out PatchAmps•Compact Design•Eliminates DA trays, Cabling and Connectors•3Gb HD, HD, SD, Analog Video, AES and Analog Audio Formats•Signal Monitoring is Standard•Lightweight•Low Power Consumption
Mechanical
PA3200LiteHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 38lbs.FULLYLOADED
Electrical
PA3200LiteInput DifferentialandIsolatedConnectors BNC,75ohmNumberofinputs upto32Numberofoutputs upto160
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
ThePatchAmpPA3200LiteVideoframehouses(4)2x32patchpanelsintegralto32DAcardsin4RUweighingjustunder40lbs.ThePatchAmpPA-901HD1x4videodistribution amplifier is multi-rate upto 3Gig, guaranteeing thateverysignalisequalizedandreclockedatthepatchbay. The SDI and analog video distribution amplifiers are available in 1x5 configurations.
rear panel PA901 distribution amplifier with patches
4 (2x32) patchbays with integrated distribution amplifiers
Model: PA-901LitePatchable Distribution Amplifier
Technical Specifications:
- Single 1x4- True 75 ohm coaxial in and out- Auto equalizing- Multi-rate reclocking up to 3GB- Supports all HD/SD formats- Removes high frequency jitter- Compatible with PA3200Lite- Lock and EQ warning indicators - Signal meter and fault outputs
Input
Number of Inputs 1Input Connection 75 Ohm BNCInput Impedance 75 OhmInput Return Loss >18dB up to 1.5GHzSignal Level 800mV +/-10% Output
Channels SingleOutputs per Channel 4Output Connection 75 Ohm BNCOutput Impedance 75 OhmOutput Return Loss >18dB up to 1.5GHz
PerformanceStandards SMPTE 424M, 292M, 259M, 344MData Rates 143, 177, 270, 360, 540, 1483.5, 1485, 2970 Mb/sMax Cable Length 230 ft. @ 2.97 Gb/s Belden 1684A 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694AEqualization Mode Automatic Multi-RateReclocking Multi-RateSignal Level 800mV NominalDC Offset 0V +/-0.5VRise & Fall Time 200ps nominalOvershoot < 10% of amplitudeWideband Jitter < 0.2 UI
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
Model: PA-902LitePatchable Distribution Amplifier
Technical Specifications:
- 1 x 5 Expansion Module- True 75 ohm coaxial in and out- Auto equalizing- Multi-rate reclocking up to 3GB- Supports all HD/SD formats- Removes high frequency jitter- Compatible with PA3200Lite- Lock and EQ warning indicators - Signal meter and fault outputs
Input
Number of Inputs 1Input Connection 75 Ohm BNCInput Impedance 75 OhmInput Return Loss >18dB up to 1.5GHzSignal Level 800mV +/-10% Output
Channels SingleOutputs per Channel 4 Patched 1 DirectOutput Connection 75 Ohm BNCOutput Impedance 75 OhmOutput Return Loss >18dB up to 1.5GHz
PerformanceStandards SMPTE 424M, 292M, 259M, 344MData Rates 143, 177, 270, 360, 540, 1483.5, 1485, 2970 Mb/sMax Cable Length 230 ft. @ 2.97 Gb/s Belden 1684A 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694AEqualization Mode Automatic Multi-RateReclocking Multi-RateSignal Level 800mV NominalDC Offset 0V +/-0.5VRise & Fall Time 200ps nominalOvershoot < 10% of amplitudeWideband Jitter < 0.2 UI
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
Model: PA-903LitePatchable Distribution Amplifier
Technical Specifications:
- Single 1x5- True 75 ohm coaxial in and out- Auto equalizing- Polarity matched input/ouput- Multi-rate reclocking up to 3GB- Supports all HD/SD/ASI formats- Removes high frequency jitter- Compatible with PA3200Lite- Lock and EQ warning indicators - Signal meter and fault outputs
Input
Number of Inputs 1Input Connection 75 Ohm BNCInput Impedance 75 OhmInput Return Loss >18dB up to 1.5GHzSignal Level 800mV +/-10% Output
Channels SingleOutputs per Channel 5Output Connection 75 Ohm BNCOutput Impedance 75 OhmOutput Return Loss >18dB up to 1.5GHz
PerformanceStandards SMPTE 424M, 292M, 259M, 344MData Rates 143, 177, 270, 360, 540, 1483.5, 1485, 2970 Mb/s, ASIMax Cable Length 230 ft. @ 2.97 Gb/s Belden 1684A 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694AEqualization Mode Automatic Multi-RateReclocking Multi-RateSignal Level 800mV NominalDC Offset 0V +/-0.5VRise & Fall Time 200ps nominalOvershoot < 10% of amplitudeWideband Jitter < 0.2 UI
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
Model: PA-101LitePatchable Distribution Amplifier
Technical Specifications:
- Used for analog video or AES audio- True 75 ohm coaxial in and out- Auto equalizing and reshaping for AES audio- passive or active loopthrough- Compatible with PA3200Lite- Signa present indicators - Signal meter and fault outputs
Input
Number of Inputs 1 PatchedInput Connection 75 Ohm BNCInput Impedance 75 OhmInput Return Loss >40dB to 5MHz
Output
Channels SingleOutputs per Channel 3 Patched 2 DirectOutput Connection 75 Ohm BNCOutput Impedance 75 OhmOutput Return Loss >40dB to 5MHz
Performance
Standards Analog video or AES audioEqualization Range 250 ft. belden 1694a for video 1000 ft. for AES audioMax.Signal Level 2.5 Vp-p centered at 0VDC Differential Phase < 0,15%Differential Gain < 0.15%S/N > 70 dBPropagation Delay 15nSPower < 5 Watts
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
PATCHING & DISTRIBUTION TECHNOLOGY
PA10032 VIDEO PATCHAMP FRAMEUp to 64 1-in by 4-out distribution amps per frameAlso can be configured as 1-in by 9-outAll connections betweeen DAs and jacks are internal Frame houses HD/SD sdi, AES audio and Analog VideoSee thru front cover allows quick status indicationLight weight only 100 lbs per systemLow power consumption and integrated coolingAlarm relay and meter voltage outputs75 ohm wired midplane for optimum performance
Mechanical
PA10032Height 24.5inches(14RU)Width 19inchesDepth 16inchesNominalWeight 100lbs.FULLYLOADED
Electrical
connectors bncor16channelmultNumberofinputs upto64Numberofoutputs upto256Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
The PA10032 is a 14RU frame specifically de-signedtoeliminatethehasslesofinstallingandwiringlargescalecoaxialdistributionsystems.Bythevirtueofit’spatenteddesign;thispre-wiredsystemsignifcantlyreducestherackspacerequiredwhencomparedtotheolderstylesystems.Italsoeliminatesallwiringbetweenthepatchbaysanddistribution amplifiers.
The Rack Saver
PATCHING & DISTRIBUTION TECHNOLOGY
PA1600HD VIDEO DISTRIBUTION FRAMEUp to 32 1-in by 4-out distribution amps per frame
Compact design offers high module density
Accepts all patchamp high density modules
Wideband frame houses aes, sd-sdi, and hd-sdi
Signal metering and monitoring is standard
See thru front cover allows quick status indication
Mechanical
PA1600HDHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 26lbs.FULLYLOADED
Electrical
PA1600HDInput UnbalancedConnectors BNC,75ohmNumberofinputs upto32Numberofoutputs upto128
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
ThePA1600HDisa4RUframewhichhousesthesamehighdensitydual1x4videodistributionamplifiers as the PA-10032 pre-wired systems. Thisuniversalframeemploysatrue75ohmmidplaneforoptimumperformanceforallcoaxialsignals.
PATCHING & DISTRIBUTION TECHNOLOGY
PA3200HD VIDEO DISTRIBUTION FRAMEUp to 64 1-in by 4-out distribution amps per frameAlso can be configured as 1-in by 9-outCompact design offers high module densityAccepts all patchamp high density modulesWideband frame houses analog, sd-sdi, and hd-sdiSignal metering and monitoring is standardSee thru front cover allows quick status indicationLightest weight per distribution amplifierLowest power consumptiom per distribution amplifier
Mechanical
PA3200HDHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 38lbs.FULLYLOADED
Electrical
PA3200HDInput DifferentialandIsolatedConnectors BNC,75ohmNumberofinputs upto64Numberofoutputs upto288
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
The PA3200HD is a 4RU frame specifically designedtoreducetheamountofrackspacehousing video distribution amplifiers. One 4RU PA3200HDreplacesfour2RUoldstyletrays.Thisuniversalframeemploysatrue75ohmmidplaneforoptimumperformanceforallcoaxialsignals.
Model: PA-6000-402DUAL HD/SD Distribution Amplifier
Technical Specifications:
- Dual 1x4 or single 1x7- True 75 ohm coaxial in and out- Auto equalizing- Multi-rate reclocking- Supports all hd/sd formats- Removes high frequency jitter- Compatible with PA3200HD, and PA10032A- Lock and eq. warning indicators - Signal meter and fault outputs
Input
Number of Inputs 2Input Connection 75 Ohm BNCInput Impedance 75 OhmInput Return Loss >18dB up to 1.5GHzSignal Level 800mV +/-10% Output
Channels Single or DualOutputs per Channel Single-7, Dual-4Output Connection 75 Ohm BNCOutput Impedance 75 OhmOutput Return Loss >18dB up to 1.5GHz
Performance
Standards SMPTE 292M, 259M, 344M CompliantData Rates 143, 177, 270, 360, 540, 1483.5, 1485Mb/sMax Cable Length 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694AEqualization Mode Automatic Multi-RateReclocking Multi-RateSignal Level 800mV NominalDC Offset 0V +/-0.5VRise & Fall Time 200ps nominalOvershoot < 10% of amplitudeWideband Jitter < 0.2 UI
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
Model:PA-6000-310Video Distribution Amplifier
Technical Specifications:
- Dual 1x4 or single 1x9- True 75 ohm coaxial in and out- equalizing- hum canceling differential inputs- Supports video, bilevel ref, tri-level ref, aes word clock and 6Hz ref- Compatible with PA3200HD, and PA10032A- Video loss indicators - Signal meter and fault outputs
InputNumber of Inputs 2, DifferentialInput Connection 75 Ohm BNCInput Impedance 75 OhmInput Level 1 Vp-p nominalMax. Input Level 2.5 Vp-p centered at 0VInput Return Loss >40dB up to 5MHzCommon Mode 10 Vp-pCMRR >40dB to 10kHz OutputChannels Single or DualOutputs per Channel Single-9, Dual-4Output Connection 75 Ohm BNCOutput Impedance 75 OhmOutput Return Loss >40dB up to 5MHzPhase Match < +/- 0.2 @ 3.58MHzOutput Isolation > 35 dB @ 5 MHz
PerformanceGain Range +/- 3dBFrequency Response < +/- 0.05dB to 5 MHz +/- 0.2dB @ 20MHz > -3dB @ 120MHz typicallyDifferential Gain (10-90% APL) < 0.15%Differential Phase (10-90% APL) < 0.15%Line Rate Window Tilt < 0.20%Field Rate Window Tilt < 0.20%S/N > 70dBHum <1mVp-pPropagation Delay 15 +/- 1.0nSOvershoot < 10% of amplitudeEqualization Range 250ft. Belden 1694A CableResponse < +/- 0.05dB to 5 MHz
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
PATCHING & DISTRIBUTION TECHNOLOGY
PA3200 VIDEO DISTRIBUTION FRAMEUp to 32 1-in by 5-out distribution amps per frame
Compact design offers high module density
Accepts all patchamp standard density modules
Wideband frame houses analog, sd-sdi, and hd-sdi
Signal metering and monitoring is standard
See thru front cover allows quick status indication
Mechanical
PA3200HDHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 34lbs.FULLYLOADED
Electrical
PA3200HDInput DifferentialandIsolatedConnectors BNC,75ohmNumberofinputs upto32Numberofoutputs upto160
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
ThePA3200isa4RUframewhichhousesthesamestandarddensity1x5videodistributionamplifiers as the PA-5024 and PA-5032 pre-wiredsystems.Thisuniversalframeemploysatrue75ohmmidplaneforoptimumperformanceforallcoaxialsignals.
PATCHING & DISTRIBUTION TECHNOLOGY
PA2400Lite Patchable Distribution Amps•Up to 24 1-in by 5-out Stereo PatchAmps•Compact Design•Eliminates DA trays, Cabling and Connectors•Stereo Analog Audio•Signal Monitoring is Standard•Lightweight•Low Power Consumption
Mechanical
PA2400LiteHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 28lbs.FULLYLOADED
Electrical
PA3200LiteInput >30KOhms,balancedor600OhmsConnectors E3Numberofinputs upto24stereoNumberofoutputs upto120stereo
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
ThePatchAmpPA2400LiteAudioframehouses(4)2x24patchpanelsintegralto24DAcardsin4RUweighingjustunder30lbs.Theframeis4RUhighwithE3rearconnec-tions.ThePatchAmpPA-501HDisa1x5stereo analog audio distribution amplifier with anAGCandcompressor/limiter.
rear panel PA501 distribution amplifier with patches
4 (2x24 stereo) patchbays with integrated distribution amplifiers
Model: PA-501LitePatchable Distribution Amplifier
Technical Specifications:
- Stereo 1x5- AGC/Compressor-Limiter- Standard Bantam Patches- Programmable normals- On board ground lifters- Compatible with PA2400ALite- Audio level indicators - Signal meter and fault outputs
Input
Impedance >30KOhms,balancedor600OhmsBalancedMax.Level +26dBu(66Ohms),+22dBm(600Ohms)CommonModeRange +/-20VCMR >90dB@60Hz,>60dB@20KHz
Output
Channels Stereo(1x5)OutputsperChannel 5Impedance 66Ohms,150Ohms,or600OhmsMax.Level +26dBu(66Ohms),+22dBm(600Ohms)OutputtoOutputIsolation >70dB,20Hzto20kHz
Performance
GainRange -6 to +33dBS/N Ratio >100dB @ unity gain 20Hz -20 kHzFrequency Response <±0.05dB, 20Hz - 20 kHz, rel. to 1kHz, any level
up to +26dBu (66 ohms), +22dBm (600 ohms)Total Harmonic Distortion <0.01%, 20Hz - 20 kHz @ +26dBu (66 ohms),
+22dBm (600 ohms) Isolation between Modules >100dB, 20Hz - 20 kHz
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
PATCHING & DISTRIBUTION TECHNOLOGY
PA10048A AUDIO PATCHAMP FRAMEUp to 96 1-in by 4-out distribution amps per frameAlso can be configured as 1-in by 9-outAll connections betweeen DAs and jacks are internal Jumper configurable normals and groundsFrame houses AES and AnalogSee thru front cover allows quick status indicationLight weight only 100 lbs per systemLow power consumption and integrated coolingAlarm relay and meter voltage outputs110 ohm wired midplane for optimum performance
Mechanical
PA10048AHeight 24.5inches(14RU)Width 19inchesDepth 16inchesNominalWeight 100lbs.FULLYLOADED
Electrical
Connectors USERSPECIFIED,110ohmNumberofinputs upto96Numberofoutputs upto384
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
The PA10048A is a 14RU frame specifically designedtoeliminatethehasslesofinstallingandwiringlargescaleaudiodistributionsystems.Bythevirtueofit’spatenteddesign;mis-wiring,loosewires,shorts,phasereversals,badgrounds,etc.,simplydonotexist.
The Labor Saver
PATCHING & DISTRIBUTION TECHNOLOGY
PA1600AHD AUDIO DISTRIBUTION FRAMEUp to 64 1-in by 4-out distribution amps per frame using only 16 cards Also can be configured as 1-in by 9-outCompact design offers high module densityAccepts all patchamp high density modulesFrame houses AES and AnalogSee thru front cover allows quick status indicationLightest weight per distribution amplifierLowest power consumptiom per distribution amplifier
Mechanical
PA1600AHDHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 21lbs.FULLYLOADED
Electrical
PA1600AHDConnectors Elco3-pin,110ohmNumberofinputs upto64Numberofoutputs upto288
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
The PA1600AHD is a 4RU frame specifically designedtoreducetheamountofrackspacehousing audio distribution amplifiers. One 4RU PA1600AHDreplacesatleastfour2RUoldstyletrays.Thisuniversalframehouses16cardsandemploysa110-ohmwiredmidplaneforoptimunperformanceforalltwistedpairaudiosignals.
PATCHING & DISTRIBUTION TECHNOLOGY
PA2400AHD AUDIO DISTRIBUTION FRAMEUp to 96 1-in by 4-out distribution amps per frame using only 24 cards Also can be configured as 1-in by 9-outCompact design offers high module densityAccepts all patchamp high density modulesFrame houses AES and AnalogSee thru front cover allows quick status indicationLightest weight per distribution amplifierLowest power consumptiom per distribution amplifier
Mechanical
PA2400AHDHeight 7inches(4RU)Width 19inchesDepth 16inchesNominalWeight 25lbs.FULLYLOADED
Electrical
PA2400AHDConnectors Elco90-pin,110ohm,SACWiringNumberofinputs upto96Numberofoutputs upto384
Power
Type External,48Vdc InputVoltage 90-264Vac,47-63Hz,SinglePhaseRedundancy N+1,hotswappablemodulesPowerFactor >.99EMI complieswithEN55022&FCCClassA
SPECIFICATIONS
PatchAmp20EastKennedyStreet
Hackensack,NewJersey07601phone(201)457-1504fax(201)457-1507
www.patchamp.com
The PA2400AHD is a 4RU frame specifically designedtoreducetheamountofrackspacehousing audio distribution amplifiers. One 4RU PA2400AHDreplacesatleastfour2RUoldstyletrays.Thisuniversalframehouses24cardsandemploysa110-ohmwiredmidplaneforoptimunperformanceforalltwistedpairaudiosignals.
Model: PA-6000-302AES Distribution Amplifier
Technical Specifications:
- Quad 1x4 or dual 1x9- 110 ohm xfmr in and out- Auto equalizing- Data re-shaping- Supports all AES formats- Eighteen outputs per module- Compatible with PA3200AHD, PA5048A and PA10048A- Signal presence indication for each channel
Input
Impedance 110OhmsTransformerCoupled,BalancedMax.Level 2–7Vp-p
Output
Channels Quad(1x4)orStereo(1x9)OutputsperChannel 4(1x4)or9(1x9)Impedance 110OhmsTransformerCoupledMax.Level 4–5Vp-pAuto-equalizing
Performance
MaxCableLength 2,000ft.TwistedPair(Belden1800B)EqualizationMode AutomaticReshaping YesJitter <5nsPropagationDelay <100ns
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM
Model: PA-6000-502Audio Distribution Amplifier
Technical Specifications:
- Quad 1x4 or dual 1x9- Flexible in/out impedance- Virtually transparent- +26 dBm output level- Very low noise (100dB S/N)- Eighteen outputs per module- Compatible with PA3200AHD, PA5048A and PA10048A- VU meter indication for each channel
Input
Impedance >30KOhms,balancedor600Ohms BalancedMax.Level +26dBu(66Ohms),+22dBm (600Ohms)CommonModeRange +/-20VCMR >90dB@60Hz,>60dB@20KHz
Output
Channels Quad(1x4)orStereo(1x9)OutputsperChannel 4(1x4)or9(1x9)Impedance 66Ohms,150Ohms,or600OhmsMax.Level +26dBu(66Ohms),+22dBm (600Ohms)OutputtoOutputIsolation >70dB,20Hzto20kHz
Performance
GainRange -6 to +33dB, (±6dB, 0, +9, +18, +27 dB on jumper)S/N Ratio >100dB @ unity gain 20Hz -20 kHzFrequency Response <±0.05dB, 20Hz - 20 kHz, rel. to
1kHz, any level up to +26dBu (66 ohms), +22dBm (600 ohms)
Total Harmonic Distortion <0.01%, 20Hz - 20 kHz @ +26dBu (66 ohms), +22dBm (600 ohms)
Isolation between Modules >100dB, 20Hz - 20 kHzIntermodulation Distortion <0.02%, SMPTE @ +18dBu (66 ohms), +18dBm (600 ohms)Interchannel Crosstalk >95dB, 20Hz -20kHz
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601201-457-1504 Fax: 201-457-1507www.patchamp.com
BLOCK DIAGRAM