PASSION FOR WATERJET CUTTING

WWW.STM.AT

02 | WWW.STM.AT

Our values.Our motivation.

Personally. Direct. Solution-oriented.

As an owner-managed family business, we are thinking long-term and sustainable. We therefore help our customers in all phases: From test cut to production consulting all the way to plant expansion, we are at your side with help and advice. Because together we can achieve more.

Partnership. Service. Trust.

Whatever you need, we make it possible. You can get operating supplies and spare parts directly and well-priced at the online shop. We will be happy to support you in production issues via remote maintenance and an STM technician can be on site quickly, if necessary.

Economical. Flexible. Innovative.

Thanks to the modular system, we can put together your personal dream system. The special feature is that you can also upgrade the plant without problem. The waterjet cutting technology opened undreamt-of possibilities and is a safe investment in the future.

Sustainability. Responsibility. Efficiency.

Innovation and resource-sparing production are more than just two catchwords. We specifically research and develop solutions in order to work more economical with active recycling while sparing the environment. That is not only good for the conscience, but also for the balance sheets.

WWW.STM.AT | 03

“Our goal is

to offer the best service

in the entire industry.”

Jürgen Moser, Managing Director

04 | WWW.STM.AT

HISTORY

Our passion: Waterjet cutting.

Simple solutions for complex tasks. That is the basic principle behind every STM waterjet cutting system. A success story since 1992.

STM Facts

Locations: STM Stein-Moser GmbH, Eben im Pongau, Austria STM Waterjet GmbH Germany, Schweinfurt, Germany

Employees: 45

Sales organisation: France, Belgium, Spain, Portugal, Netherlands, Denmark, Croatia, Russia, Switzerland

Export rate: 85%

It all started with a simple wish. There should really be an easier way. The family-owned stone masonry needed a waterjet cutting system for the elaborate cutting tasks. The system should be able to be operated by anyone without special skills, easy to service and be especially robust.

But what can you do if there is no system that meets the individual requirements? What we at STM always do when faced with a challenge: We develop our own concept, always want more and roll up our sleeves. The rest is history.

Since 1992, we have developed innovative waterjet cutting systems. As an owner-managed family business, we are thinking long-term and sustainable. We focus exclusively on the subject of waterjet cutting and offer our customers Austrian quality, in depth detailed knowledge and a partnership at eye level.

WWW.STM.AT | 05

1992Development of the first waterjet cutting

system

1999Establishment of

Maximator JET GmbH

2002100th waterjet cutting

system delivered

1974Establishment of STM

Stein-Moser GmbH

1997Start of the research

collaboration with the Fraunhofer

Institute

2000Start of the

cooperation with Maximator JET

GmbH

20115-axes waterjet

cutting with up to 68° STM 3D/68

2015Development of the

OneClean system

2017Maximator JET becomes STM

Waterjet GmbH Germany

2006The first

PremiumCut system was developed

2012Move to the new

company location in Eben im Pongau

2016STM angle error

compensation cutting head

TAC/12

“Water, pressure and sand.

That is how we make it possible.”

06 | WWW.STM.AT

STM research cooperations:

EUREKA Network for market-orientated research & development

Leibniz University Hanover Arbeitskreis Wasserstrahltechnologie - work group waterjet technology

Fraunhofer-Gesellschaft e.V. Promotion of the applied research

Hochschule Karlsruhe - Karlsruhe College Technology and economy

RESEARCH & DEVELOPMENT

Water is for cutting.

We are convinced of that: Waterjet cutting is the ultimate cutting technology. Cold cut, no material hardening, nearly all materials are cuttable and extremely energy- and cost-saving at that.

We therefore do everything to advance the technology and further explore the limits of what is feasible. Our own development department designs and researches for innovative solutions every day.

Together with our partners and renowned research institutions, we develop the waterjet cutting systems of the future today. Industry 4.0 is not just a catchword for us. STM waterjet cutting systems enable linked working, resource-sparing manufacturing and lean just-in-time production as well as small series production.

Using the waterjet cutting technology is a matter close to our hearts. We work with a number of educational institutions to give machine operators and the responsible parties of tomorrow an understanding of the advantages of waterjet cutting.

WWW.STM.AT | 07

“Versatile,

efficient and precise.

We live

waterjet cutting.”

08 | WWW.STM.AT

We build exactly the waterjet cutting system you need.

From a small 1x1 2D cutting system all the way to a 15x4 m system with multiple Z-axes and several 3D cutting heads. The intelligent, modular system combines the advantages of standard components with the high level of individualisation of our versatile configuration range. STM waterjet cutting systems can also be retrofit through a variety of tuning options. Your system thus grows with you.

Our systems cover the complete area of waterjet cutting. We offer you the entire range, from cutting system to software, trainings and operating supplies all the way to cleaning and recycling systems.

STM MODULAR SYSTEM

Just the way you want it.

AUS TRIA N QUALITY

European top quality and brand components

MODULAR SYSTEM

Customizable and economical

LIGHTWEIGHT DESIGN SYSTEM

Stainless steel and aluminium structure

SIMPLE TO USE PRINCIPLE

Easy to service, concealed linear guides, no bellows

WWW.STM.AT | 09

We build exactly

the waterjet cutting system

you need.

STM 2D HEAD

Standard cutting head

STM TAC/12

Taper angle control cutting head

STM 3D 48°/68°

5 axes 3D cutting head

TubeCut

Pipe cutting module

Cutting heads and modules

OneClean

The modular all-round system:

Hydro filter and cleaning Water cycle system Abrasive recycling

Recycling and cleaning

EcoCut

The entry-level model

MasterCut

The all-rounder

PremiumCut

The high-end system

MicroCut MJ

The specialist for precision

Series

10 | WWW.STM.AT

Easy to operate, easy to service and simply that crucial step ahead. STM waterjet cutting systems are developed with the focus on the user. It is therefore important that our systems are safe and provide the highest ease of use. STM waterjet cutting systems have a compact, user-friendly structure made up of three elements: Cutting table, control unit and high-pressure pump. These three units are perfectly connected in terms of looks and function.

Independently from the model, all constructive components and screws are made from stainless steel or aluminium. Characteristic features are a flat bottom as well as the smooth side walls with concealed linear guides without bellows and a high-pressure pipe fed through the axes.

The fully digital drive consists of brushless AC servo motors with multi-axes NUM CNC control. The corresponding software runs on MS Windows and requires only a standard computer.

Easy access and easy to clean

CONCEALED L INEAR GUIDING –

NO BELLOWS

Accessible all-aroundWORK SURFACE ACCESSIBLE

FROM 3 S IDES

To-the-gram and low-maintenance

ABRASIVE DOSING SYSTEM

SIMPLE TO USE PRINCIPLE

Cutting can be that easy.

WWW.STM.AT | 11

STM SmartCut, the all-round cutting software for waterjet cutting.

STM SmartCut is the central part of each STM waterjet cutting system. The software is a full program for creating or importing drawings for setting process-specific parameters for the waterjet. The special feature is that the application does not require special CNC or EDP knowledge. Use the full flexibility of the waterjet because STM SmartCut simplifies operation through suggested strategies and an intuitive user interface. STM SmartCut communicates directly between waterjet cutting system and a standard office computer as CNC control unit and enables fast processing of cutting orders.

The software determines all parameters from pump pressure to abrasive dosing all the way to cutting speed. The stored material database is continuously updated and the cutting strategies allow you to cut even the most complicated component. And all of this so that you can get perfect results as fast as possible. And if you do want to refine something, the software allows you to make all the settings yourself.

Overview of functions

• Intuitive user interface on a standard office computer

• No special CNC or EDP knowledge required

• Direct realisation of the diagram shown on the screen

• Pre-defined cutting strategies and material database

• Automatic setting of pump pressure and abrasive quantity

• Calculation module for estimated processing time and exact costs of an order including printable report

• Remote maintenance by the STM team via remote access

• Large selection of add-on modules

SOFTWARE

STM SmartCut – The central partof your cutting system.

“The focus

is on the user.”

12 | WWW.STM.AT

When or where does not matter. We are always there for you, give our all to tackle your issues and are on your side with help and advice.

STM services

Trainings and production consulting

Annual service and machine maintenance Remote maintenance and online trainings

SERVICE AND CONSULTING

You can rely on us.

The most important thing about a waterjet cutting system is that it cuts. Preferably all the time. We therefore do our utmost to offer our customers perfect service. Starting with training to comprehensive telephone support all the way to complex production consulting. Best possible service to us means that we are glad to give advice on technical problems fast, competent and friendly. Because no distance is too far and no problem too complicated for our service engineers.

You can get spare parts and operating supplies fast and without complications at the STM online shop. And when things do get complicated, our service engineers are ready to offer you solutions for your production issues. We will be happy to support you with preliminary calculations and profitability analyses.

SERVICE AND CONSULTING

You can rely on us.

Remote maintenance. Telephone support

24H SUPPORT AND HOTLINE

Online Shop

ACCESSIBLE 24/7 AND CLEARLY STRUCTURED

Guaranteed supply

SPARE PARTS GUARANTEE FOR 10 YEARS

WWW.STM.AT | WWW.STM-WATERJET.DE | 13

14 | WWW.STM.AT

We always have a sympathetic ear for our customers. And we love finding solutions together and making them reality.

More than 700 systems word-wide already speak volumes. It is our goal to communicate with our customers at eye level. That is why we are represented in a variety of industries and like to share our specialised knowledge with you.

PARTNERSHIP AND REFERENCES

Successful together.

WWW.STM.AT | 15

PARTNERSHIP AND REFERENCES

Satisfied customers world-wide.Metalworking / Mechanical engineering Metalworking / Mechanical engineering Metalworking / Mechanical engineering

Materials / Sealing industry Materials / Sealing industry

www.kraess.de

Glass

Stone Stone Research / Schools

Research / Schools Research / Schools Research / Schools

Plastic

einfach passgenau

Plastic Plastic

Custom cutting Custom cutting Custom cutting

Subject to technical modifications and error. STM 02/2018

Gewerbegebiet Gasthof Süd 1785531 Eben im Pongau, Austria

WATERJET SOLUTIONSSTM Stein-Moser GmbH

T: +43 (0) 64 58 200 14-0E: info@stm.at

W: www.stm.atUID: ATU 35291607