parts list for cv-1800-0mbh · cv-1800-0mbh-082906-gjh frame assembly for cv-1800-0mbh (after...

�©Copyright 2006, Mi-T-M Corporation® EX-9242-082906

PARTS LIST FOR

CV-1800-0MBH (AFTER SERIAL #10241138)

CV-2100-0MBC (AFTER SERIAL #10217673)

CV-2100-0MHC (AFTER SERIAL #10026779)

Engine Oil Grade: Honda: SAE10W-30 Vanguard: Above 40°F=SAE 30 Below 40°F=SAE10W-30 Engine Oil Capacity: 20 oz. Nozzle Size: 1.20 mm

®

®

by Mi-T-M

The

Pump Oil Grade: CV-1800-0MBH/CV-2100-0MBC: 75W90 Synthetic CV-2100-0MHC: Mi-T-M Pump Oil #AW-4085-0016Pump Oil Capacity: CV-1800-0MBH/CV-2100-0MHC: 4.5 oz. CV-2100-0MBC: 2.3 oz.

2©Copyright 2006, Mi-T-M Corporation® EX-9242-082906

This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Cold Water Pressure Washer was constructed and designed with quality and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level of acceptance.

The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice.

WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER!

SAFETY WARNINGS1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty.

2. NEVER make adjustments on machinery while the unit is connected to the power source. Turning over the machinery by hand during adjustment or cleaning might start the machinery, causing serious injury to the operator.

3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls.

4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area.

5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving.

Table of Contents

SPECIFICATIONS ...........................................................................................................................................................................................................3FRAME ASSEMBLY FOR CV-1800-0MBH (AFTER SERIAL #10241138) ...................................................................................................................4FRAME ASSEMBLY FOR CV-2100-0MBC (AFTER SERIAL #10217673) ....................................................................................................................6FRAME ASSEMBLY FOR CV-2100-0MHC (AFTER SERIAL #10026779) ...................................................................................................................8PuMP ASSEMBLY (3-0152) ...........................................................................................................................................................................................10PuMP ASSEMBLY (3-0271) ...........................................................................................................................................................................................12GuN/ WAND ASSEMBLY (16-0365) ..............................................................................................................................................................................14LANCE ASSEMBLY (16-0388) .......................................................................................................................................................................................16NOTES ............................................................................................................................................................................................................................18-19


SPECIFICATIONS

MODEL NuMBER CV-1800-0MBH CV-2100-0MBC CV-2100-0MHC Operating Pressure (PSI/Bar): 1800/124.1 2100/144.5 High Pressure Nozzle: 1.20 mm Water Volume (GPM/lpm): 2.0/�.6 Engine: Briggs & Stratton Honda Horsepower 4.0 6.0 5.5 Engine Type 4 Stroke, Overhead Valve, Single Cylinder

Oil Type SAE10W-30 Above 40°F=SAE�0/Below 40°F=SAE10W-30

Oil Capacity (oz./liters) 20/.6 Fuel Type Unleaded Gasoline 86 Octane Minimum Fuel Capacity (gallon/ liters) 1/.95 .38/1.42 .29/1.1 Starting Recoil Maximum No Load RPM 3600 (+/- 100) RPM Pump: Direct Driven, Oil Bath, Triplex Axial Piston Oil Type �5W90 Synthetic Mi-T-M Pump Oil #AW-4085-0016 Oil Capacity (oz./liters) 2.3/0.� 4.5/.13 Plungers Stainless Steel Manifold Brass Aluminum Valves Plastic Stainless Steel Unloader Preset Detergent Injector Low pressure down stream from pump unit Net Weight (lbs/Kg) 46 / 2� 62 / 28 60 / 2� unit Shipping Weight (lbs/Kg) 61 / 2�.5 �1 / 33.5 �5 / 34

unit Net Dimension (in/cm) 13.5L x 13.5W x 21.5H /34L x 34W x 54.5H

21L x 1�W x 20H /53L x 43W x 50.5H

21.5L x 16.5W x 21.5H /54.5L x 42W x 54.5H

unit Shipping Dimension (in/cm) 20L x 15Wx 24H /51 L x 38Wx 61H

25L x 1�.5W x 24H /63.5L x 44.5W x 61H

24.�5L x 1�.5W x 23H /63L x 44.5W x 58H


FRAME ASSEMBLY FOR CV-1800-0MBH (AFTER SERIAL #10241138) C

V-18

00-0

MB

H-0

8290

6-G

JH


CV-1800-0MBH-082906-GJH

FRAME ASSEMBLY FOR CV-1800-0MBH (AFTER SERIAL #01241138)

REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY.

� Hose ��-02�9 � �4 Handle Grip �-0059 �

2 Inlet Filter Washer �9-000� � �� Thermal Relief Valve 22-0208 �

� Pump 3-02�1 � �6 Decal- Warning: Risk of Burns N/A Sep. �

4 Bolt 2�-00�6 � 1� Locknut 30-015� �

� Decal- CV-1800-0MBH 34-152� � �8 Engine- 4.0 HP �-0�44 �

6 Screw 2�-0015 4 �9 Key 4�-0082 �

� Isolator �4-0069 4 20 Bolt 2�-00�2 2

8 Washer 28-0002 4 2� Detergent Hose *(Four Feet Required) ��-002� �

9 Locknut �0-0�� 4 22 Detergent Strainer �9-00�0 �

�0 Decal- Warning/Caution/Operation (See 34-9023) N/A Sep. 2 2� Gun/Wand Assembly �6-0�6� �

�� Decal- Data Plate N/A � 24 Lance w/ Variable Nozzle �6-0�88 �

�2 Frame Assembly �-0�96A0� � 2� Decal- Warning: Risk of Injection (See 34-9023) N/A Sep. �

�� Decal- Caution: Risk of Fire (See 34-9023) N/A Sep. � Decal Kit (Inc. 10, 13, 16, 25) �4-902�

*Must Order in One Foot Lengths


FRAME ASSEMBLY FOR CV-2100-0MBC (AFTER SERIAL #10217673)C

V-21

00-0

MB

C-0

9190

5-G

JH


CV-2100-0MBC-091905-GJH

FRAME ASSEMBLY FOR CV-2100-0MBC (AFTER SERIAL #10217673)


� Handle �-0165A01 � �6 Thermal Relief Valve 22-0208 �

2 Bolt ��-00�� 2 1� Bolt 2�-00�6 �

� Knob �-010� 2 �8 Pump 3-02�1 �

4 Frame Assembly �-0�68A0� � �9 Locknut 30-015� �

� Decal- Data Plate N/A � 20 Decal- Warning: Muffler Hot (See 34-9023) N/A Sep. �

6 Wheel 14-00�� 2 2� Engine- 6.0 HP Briggs & Stratton 1-00�8 �

� Hub Cap ��-00�� 2 22 Decal- Caution: Allow to Cool (See 34-9023) N/A Sep. �

8 Decal- Warn/Caution/Oper. (See 34-9023) N/A Sep. � 2� Decal- Warning: Risk of Injection (See 34-9023) N/A Sep. �

9 Bolt 2�-0015 2 24 Lance �6-0�8� �

�0 Isolator �4-0069 2 2� Gun �6-0�88 �

�� Washer 28-0002 2 26 Key 4�-0082 �

�2 Locknut �0-0�� 2 2� Bolt 2�-00�2 2

�� Decal- Choremaster Logo �4-��86 � 28 Detergent Hose w/ Strainer �9-02��

�4 Decal- Warning/Caution/Operation (See 34-9023) N/A Sep. � 29 Pressure Hose ��-02�9 �

�� Filter �9-000� � Safety Decal Kit (Inc. 8, 14, 20, 22-23) �4-902�


FRAME ASSEMBLY FOR CV-2100-0MHC (AFTER SERIAL #10026779) C

V-21

00-0

MH

C-0

5130

2-R

D


CV-2100-0MHC-051302-RD

FRAME ASSEMBLY FOR CV-2100-0MHC (AFTER SERIAL #10026779)


� Handle �-0165A01 � 1� Pump �-0��2 �

2 Bolt ��-00�� 2 �8 Bolt 2�-00�1 4

� Knob �-010� 2 �9 Heat Dump Valve 22-0��4 �

4 Frame Assembly �-0�68A0� � 20 Engine Bracket ��-0��4 2

� Decal- Data Plate N/A � 2� Key 43-00�3 �

6 Washer 28-0006 2 22 Locknut 30-015� 4

� Wheel 14-00�� 2 2� Engine- 5.5 HP Honda �-0��

8 Hub Cap ��-00�� 24 Decal- Caution: Allow to Cool (See 34-9023) N/A Sep. �

9 Decal- Warning/Caution/Operation (See 34-9023) N/A Sep. � 2� Decal- Warning: Muffler Hot (See 34-9023) N/A Sep. �

�0 Bolt 2�-0015 2 26 Detergent Hose *(Four Feet Required) ��-002� �

�� Isolator �4-0069 2 2� Detergent Strainer �9-00�0 �

�2 Washer 28-0002 2 28 Pressure Hose 15-016� �

�� Locknut �0-0�� 2 29 Gun �6-0�6� �

�4 Decal- Choremaster Logo �4-�� 0 Lance �6-0�88 �

�� Decal- Warning/Caution/Operation (See 34-9023) N/A Sep. � �� Decal- Warning: Risk of Injection (See 34-9023) N/A Sep. �

�6 Filter �9-000� � Safety Decal Kit (Inc. 9, 15, 24-25, 31) �4-902�

*Must Order in One Foot Lengths

�0©Copyright 2006, Mi-T-M Corporation® EX-9242-082906

PuMP ASSEMBLY (3-0152)3-

0152

-0�2

401-

ED

W

��©Copyright 2006, Mi-T-M Corporation® EX-9242-082906

3-0152-0�2401-EDW

PuMP ASSEMBLY (3-0152)

REF # DESCRIPTION PART # QTY REF # DESCRIPTION PART # QTY REF # DESCRIPTION PART # QTY

� Oil Seal 26-0244 � �2 Packing Retainer 46-0�3� � 6� Injector Nozzle 46-0��6 �

2 Snap Ring 46-0940 � �� O-ring 2�-0�99 � 64 O-ring 2�-0�62 �

� Bearing 48-00�4 � �4 Back-up Ring 2�-0422 � 6� O-ring 2�-0248 2

4 Flange �8-006� � �� Pressure Seal 46-0�44 � 66 Injector Body 46-0�60 �

� Oil Vent Assembly (Inc. 6-10) 22-022� � �6 O-ring 2�-0�4� 2 6� Plug (For Shipping Only) N/A �

6 Oil Vent (See 22-0223) N/A Sep. � 3� O-ring 2�-0��9 � 68 Bolt 2�-8893 4

� O-ring 2�-02�� 8 Valve Complete (Inc. 39-42) (See �0-0191) N/A Sep. 6 69 U-Clip 46-0�41 �

8 Oil Vent (See 22-0223) N/A Sep. � �9 Valve Seat (See �0-0191) N/A Sep. 6 �0 Valve Seat Plate (See �0-0192) N/A Sep. �

9 O-ring (See 22-0223) N/A Sep. � 40 Valve Plate (See �0-0191) N/A Sep. 6 �1 Ball 46-068� �

�0 Oil Vent-Spring (See 22-0223) N/A Sep. � 4� Valve Spring (See �0-0191) N/A Sep. 6 �2 Unloader Seat 46-0��2 �

�� Oil Sight Glass 39-011� � 42 Valve Cage-Plastic (See �0-0191) N/A Sep. 6 �3 Backup Ring 25-024� �

�2 O-ring 25-04�� 4� Shim 46-0�45 � �4 Piston Bypass Valve (See �0-0193) N/A Sep. �

�� Thrust Washer 48-00�6 � 44 Pump Head 46-06�8 � �5 Roll Pin 46-0�64 �

�4 Thrust Needle Roller Bearing 48-005� 2 4� Bolt 2�-8892 � �6 O-ring 2�-0242 �

�� Wobble Plate 46-094� � 46 O-ring 2�-0�60 � �� Backup Ring 2�-0246 �

�6 Plug �9-0082 � 4� O-ring 2�-02�8 4 �8 O-ring 2�-02��

1� Thrust Washer 48-0064 � 48 Plug 2�-819� � �9 O-ring 2�-026� �

�8 O-ring 2�-0��8 � 49 Pump Manifold 46-0�40 � 80 Body Bypass Valve 8-04�2 �

�9 Pump Housing w/Heat Dump Port 46-0�46 � �0 O-ring 25-035� � 8� Washer 28-029� �

20 Garden Hose Connection 2�-0�04 � �� Bolt 2�-8894 � 82 Pressure Regulating Spring - 2000 PSI 49-0��

2� Garden Hose Adapter 2�-0�0� � �2 Detergent Injector Spring (See �0-0102) N/A Sep. � 8� Pressure Regulating Nut 8-04�1 �

22 Plug (For Shipping Only) N/A � �� Detergent Injector Ball (See �0-0102) N/A Sep. � 84 Set Screw 2�-8895 �

2� Washer �9-000� � �4 O-ring (See �0-0102) N/A Sep. � Piston Assembly (Includes 24-25) �0-0190

24 Retainer 46-066� � �� Detergent Injector Adapter 46-06�6 � Valve Kit (Includes 3�, 38, 46) �0-0191

2� Piston 46-0664 � �6 O-ring (See �0-0102) N/A Sep. � Injector Repair Kit (Inc. 52-54, 56) �0-0102

26 Spring 49-0�29 � 5� Banjo Fitting 46-063� � Unloader Check Valve Kit (Inc. 60-66) �0-0108

2� Gasket 26-0�68 � �8 O-ring 2�-0�4� � Unloader Seat Kit (Includes 65, �0-�2) �0-0192

28 Plug �9-0098 � �9 Detergent Injector Hose Barb 46-06�8 � Unloader Stem Kit (Inc. 36, �3-84) �0-0193

29 Bolt 2�-8404 � 60 O-ring 2�-0��4 � Manifold Assy. (Inc. 36, 48-5�, 60-84) �0-0194

�0 Oil Seal 26-0�9� � 6� Check Valve 22-0��8 � Packing Kit (Inc. 3 each item 33 and *34, 35) �0-0195

�� O-ring 2�-02�� 62 Check Valve Spring 49-0��0 � *NOTE: When replacing Packing Kit, items 34 and 35 will be replaced by Part # 46-0738.


PuMP ASSEMBLY (3-0271)3-

02�1

-052

606-

JJT


3-02�1-052606-JJT

PuMP ASSEMBLY (3-0271)

REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY.

� Pump Housing N/A � 2� O-ring 2�-0�26 � 4� Inlet Extension 46-11�9 �

2 O-ring 2�-0�2� � 22 Unloader Piston 8-0�6� � 42 Garden Hose Fitting 46-11�8 �

� Plug �9-020� � 2� Nut �0-6024 � 4� Spring 49-0�60 �

4 Piston Oil Seal (See �0-0411) N/A Sep. � 24 Set Screw 2�-958� � 44 Piston (See �0-0410) N/A Sep. �

� Packing Retainer 46-11�� 2� Adjustment Barrel 8-0�64 � 4� Spring Retainer 46-��8� �

6 High Pressure Seal (See �0-0412) N/A Sep. � 26 Spring Button 8-0�0� 2 46 Washer 46-08�6 �

� Valve Complete (See �0-0409) N/A Sep. 6 2� Unloader Spring 49-015� � 4� Bearing 48-005� �

8 Pump Head N/A � 28 Set Screw 2�-9588 � 48 Washer 48-00�6 �

9 Valve Cap �9-02�8 � 29 Hose Barb 46-0869 � 49 Wobble Plate Shaft 46-��84 �

�0 Easy Start Seat 8-0�68 � �0 O-ring 25-03�1 � �0 Ball Bearing 48-00�4 �

�� Spring 49-0��8 � �� Stainless Steel Ball 8-0�2� � �� Snap Ring 46-��8� �

�2 Easy Start Ball 8-056� � �2 Compression Spring 8-0�20 � �2 Oil Seal 26-0290 �

�� Set Screw 2�-9589 � �� O-ring 2�-0406 � Injector Repair Kit (Inc. 30-32) �0-0293

�4 O-ring 2�-0�00 � �4 Non-Return Valve 46-��80 � Valve Kit (Inc. 6 each �) �0-0409

�� Unloader Seat 8-05�0 � �� Spring 49-0��9 � Piston Kit (Inc. 3 each 44) �0-0410

�6 Unloader Poppet 8-0�69 � �6 O-ring 2�-040� 2 Piston Oil Seals Kit (Inc. 3 each 4) �0-0411

1� O-ring 25-038� � 3� Detergent Injector 46-��8� � High Pressure Seals Kit (Inc. 3 each 6) �0-0412

�8 Piston Guide 8-0�66 � �8 Outlet Extension 46-��82 � O-ring Kit (Inc. 2, 14, 1�, 20, 21, 30, 33, 36) �0-0413

�9 Back-up Ring 2�-0�89 � �9 Bolt 2�-9590 � Unloader Complete Kit (Inc. 2, 14-2�) �0-0446

20 O-ring (See �0-0413 or �0-0446) N/A Sep. � 40 Inlet Filter �9-000� �


GuN/ WAND ASSEMBLY (16-0365)�6

-0�6

4-08

�20�

-RD


�6-0�64-�6-0�6�-08�20�-RD

GuN/WAND ASSEMBLY (16-0365)


� Gun Body (Right Side) 16-036� � �� Trigger Lock 16-03�2 �

2 Gun Body (Left Side) �6-0�68 � �2 Trigger 16-03�3 �

� Screw 2�-8862 6 �� Seat 26-02�8 �

4 Adapter 2�-0�8� � �4 Brass Body Outlet 16-03�4 �

� Pipe (See �0-03��) N/A Sep. � �� Gripping Area (Plastic) 16-03�5 �

6 Brass Body Inlet 16-03�0 � �6 Pipe 16-03�6 �

� Spring 49-0�4� � 1� Screw Conncect Coupling 16-03��

8 O-ring 2�-0�6� 2 Inlet Kit (Includes 4-6) �0-03��

9 Back-up Ring 2�-04�6 2 Shutter Valve Kit (Includes �-10) �0-0289

�0 Valve 16-03�1 � Complete Gun/Wand Assembly (Inc. 1-1�) �6-0�6�

parts list for cv-1800-0mbh · cv-1800-0mbh-082906-gjh frame assembly for cv-1800-0mbh (after...

Documents