parts book - storage.googleapis.com · 7 conveyor shield mount 2 010-00-16. model 2425 centre-side...

“Putting the ‘Total’ into TMR”

JAY-LOR Fabricating Inc.RR # 2 Orton, Ontario, Canada, L0N 1N0 Tel: (519) 787-9353 Fax: (519) 787-7053

165-05-01

PARTS BOOK

MODEL 2425



165-05-01

PARTS BOOKEffective: December 1, 2000

MODEL 2425

FOREWORD

This Dealer Copy of the Parts Book contains common and general information applicableto the JAY•LOR® Model 2425 Cutter-Mixer-Feeder. It has been carefully designed to ensure thatcorrect and accurate information is portrayed in every area of a typical unit, enabling efficient andeffective service to the end user of JAY•LOR Fabricating Inc.’s products.

The format of this book consists of a fundamental breakdown of components andassemblies according to the area in which they are located or function on the machine. Eacharea or section contains illustrative information regarding a part or an assembly, along withinformation such as part numbers and quantities included. At the end of each section a Price Listis found containing Dealer and Suggested List prices for the most common service itemspertaining to that section. For details and pricing information regarding parts and assembliesdepicted in the illustrations but not included in the price lists, please contact JAY•LOR

Fabricating Inc. Our service personnel will be more than willing to assist you in obtaininginformation as it pertains to JAY•LOR Fabricating Inc.’s line of products. Information and pricingfor non-stock and/or custom items will be quoted on request.

Note:

Parts and assemblies in this book may not be exactly as shown. JAY•LOR FabricatingInc. reserves the right to make any changes/revisions/amendments at any time as deemednecessary to ensure that correct information is provided.

Price Lists are prepared for the most common parts and assemblies only, and are subjectto change at any time, without notice. JAY•LOR Fabricating Inc. will do its utmost to provide thelatest information regarding our products. To ensure that the most recent information is available,please contact JAY•LOR Fabricating Inc. All prices in effect as of the date specified on thecover page of this book.

Contact us at:

R.R.#2Orton, ON

CanadaL0N 1N0

Phone: (519) 787-9353Toll-Free: (800) 809-8224Fax: (519) 787-7053e-mail: [email protected] the web: www.jaylor.com

www.jaylor.com

GENERAL INFORMATION

The JAY•LOR® Model 2425 is a new model series that replaces the JAY•LOR® Model1500. While several new features are found in the new JAY•LOR® Model 2425, many areas ofthis book may apply to the JAY•LOR® Model 1500. For information and assistance regardingdifferences between the old and new model series, please contact JAY•LOR Fabricating Inc.

It is important to use extreme caution when performing any type of service to thisequipment. General information regarding service procedures and intervals is covered in theOperator’s Manual provided with the new product. For more specific product service, pleasecontact JAY•LOR Fabricating Inc. to obtain Technical Service Bulletins that outline theprocedures and requirements for such. Please note that additional copies or replacements forany of this documentation can be ordered through JAY•LOR Fabricating Inc.

It is also important to ensure that only JAY•LOR genuine or approved parts are to beused where applicable. Mismatched or incorrect components can result in machine damage ormalfunction, or possibly personal injury.

PART NUMBERING SYSTEM

JAY•LOR Fabricating Inc. uses a 7-digit Part Numbering System for identification ofparts and assemblies used in the products we manufacture. Please refer to the machine diagramat the end of this section for details on how numbers are applied according to the area of themachine in which they are found.

ORDERING INFORMATION

Ordering components for JAY•LOR® products is simple. We ask that you complete aParts Order Form, a copy of which is attached with this book. If unclear about any of the parts orassemblies found throughout this book, please contact JAY•LOR Fabricating Inc.

It is important to include the machine model and serial numbers when ordering parts ifapplicable. The serial number plate is located on the frame of the machine as indicated in thediagram below:

In order to ship your order correctly and promptly be sure to state clearly the partnumbers and descriptions. Shipping instructions, including any special routing should be given.If you make reference to a previous shipment, please refer to the invoice number and date.

JAY••LOR Fabricating Inc. will only process Parts Orders that have been received viafacsimile or e-mail.

INVOICING TERMS AND CONDITIONS

Pricing:

For parts or assemblies sold and not associated with the sale of a JAY•LOR® mixer,prices as per Parts Book will be used (Dealer or Suggested List).

For parts or assemblies sold as extra parts or options (i.e. not listed in the JAY•LOR

Fabricating Inc. Sales Book), prices as per Parts Book will be used (Dealer or Suggested List).

Terms:

Net 30 Days, FOB JAY•LOR Fabricating Inc. applies to accounts in good standing.Overdue accounts will be charged 2% per month. All goods remain property of JAY•LOR

Fabricating Inc. until paid in full.

WARRANTY

On Goods Ordered:

Our guarantee of products made or sold by us is limited to an agreement to repair orreplacement without charge any item found defective in workmanship or material upon receipt.No claims will be allowed for labour or consequent damages.

Any part, assembly, component, etc. that has been installed and/or replaced according tospecifications established by JAY•LOR Fabricating Inc. will be warranted under the JAY•LOR

Fabricating Inc. Limited Warranty (Machine). Please refer to the procedures set out with thisdocumentation for details on warranty coverage.

JAY••LOR Fabricating Inc. Limited Warranty (Machine):

If parts and/or assemblies are ordered under the terms of JAY•LOR Fabricating Inc.’sLimited Warranty (as applied to the machine with date of purchase), please follow the proceduresset out with this documentation to process a claim.

EXCHANGED/RETURNED GOODS

Do not return any goods without first obtaining our permission. Whenever possible,JAY•LOR Fabricating Inc. will accommodate customers by accepting returns provided thatproducts have not been used or damaged. Please contact JAY•LOR Fabricating Inc. to obtain aReturn Goods Acquisition Number (RGA #).

Please note that any extra shipping, brokerage, and handling charges incurred are theresponsibility of the customer.

Returned Goods - Unused:

The price paid for goods upon return to JAY•LOR Fabricating Inc. will be credited theprice paid less 20%.

Returned Goods – Used:

The return of used goods is normally not accepted by JAY•LOR Fabricating Inc.Individual cases may be approved upon decision by the JAY•LOR Warranty Administrator.

PART NUMBERING SYSTEM AND CORRESPONDING LOCATION DIAGRAM FOR TYPICAL UNITS

D. RODGERS

160-00-01

JUN 7/00

ALL APPLICABLE 1 of 1PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

XXX - XX - XX

0 - ALL APPLICABLE2 - 12753 - 2300/23505 - 24257 - 2575/27009 - 2725/2875 21000

01 - DRUM02 - FRAME03 - STAND04 - WHEELS05 - AUGER06 - CONVEYOR07 - DRIVELINE08 - LUBE SYSTEM09 - HYDRAULICS10 - SCALES11 - SHIELDS12 - DECALS13 - MISCELLANEOUS14 - BOLTS AND FASTENERS15 - CAPS AND SPECIAL FASTENERS16 - MANUALS, BULLETINS, & BROCHURES

MAJOR ASSEMBLY: APPLIES TO:MODEL MIXER PART

PART #:

00 - INCLUDES ALL PARTS IN SUBASSEMBLYXX - PART #

SUBASSEMBLY:

00 - NO SUBASSEMBLYXX - SUBASSEMBLY #

01 - DRUM

02 - FRAME

03 - STAND

04 - WHEELS

05 - AUGER

06 - CONVEYOR

09 - HYDRAULICS

10 - SCALES

11 - SHIELDS

12 - DECALS

TABLE OF CONTENTS

SECTION DESCRIPTION SECTION

Front Door Discharge, Center-Side Door Discharge DrumAssemblies, Restrictor Blades, etc.,

01 – DRUM

Frame Assembly, Hitch, Jack, etc., 02 – FRAME

Stand Frame Assembly, Scale Indicator Mount, etc., 03 – STAND

Tires, Rims, Tubes, Axle Spindles, Hubs, Bearings, etc., 04 – WHEELS

Auger Assembly, Knives, Angling Blades, etc., 05 – AUGER

Conveyor Assemblies, Apron Chain, Drive and Idler Shafts,Bearings, Chain Couplers, Hydraulic Motors, Magnet Chutes,etc.,

06 – CONVEYOR

Planetary Gearboxes, Transmissions, Driveshafts, P.T.O.Shafts, Bearings, etc.,

07 – DRIVELINE

Oil Reservoirs, Grease Lines, etc., 08 – LUBE SYSTEM

Cylinders, Motors, Hose Kits, Valves, Fittings, etc., 09 – HYDRAULICS

Scale Indicators, Weighbars, Power Cords, etc., 10 – SCALES

Conveyor Shield Assemblies, Driveline Shielding, SpecialGuards, etc.,

11 – SHIELDS

O.E.M. Decals, Safety Decals, etc., 12 – DECALS

Parts Order Forms, Warranty Request Forms, etc., SERVICE DEPARTMENTDOCUMENTS/FORMS



01 - DRUM

MODEL 2425 FRONT DISCHARGE DRUM ASSEMBLY COMPONENTS

D. RODGERS

015-06-01

MAY 5/00

2425 1 of 1

1

PARTS LISTQTY

FRONT DOOR ASSEMBLYPART DESC.

1NO.

015-10-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 RESTRICTOR BLADE ASSEMBLY 015-11-0123 DRUM LINER (NOT SHOWN)* VARIES1

* - SPECIAL USE ONLY

MODEL 2425 CENTRE-SIDE DISCHARGE DRUM ASSEMBLY COMPONENTS

D. RODGERS

015-06-02

MAY 15/00

2425 1 of 1

1

PARTS LISTQTY

CENTRE-SIDE DOOR ASSEMBLYPART DESC.

1NO.

015-10-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 RESTRICTOR BLADE ASSEMBLY 015-11-0123 DRUM LINER (NOT SHOWN)* VARIES1


MODEL 2425 FRONT DISCHARGE DOOR ASSEMBLY

D. RODGERS

015-10-01

MAY 5/00

2425 1 of 1

1

PARTS LISTQTY

FRONT DOOR (ONE-PIECE)PART DESC.

1NO.

015-00-04PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 ROLLED FLATBAR REINFORCEMENT 010-00-0613 LOWER CYLINDER BRACKET 010-00-2324 TOP CYLINDER BRACKET 010-00-2225 FRONT DOOR RAILS (ONE-PIECE) 010-07-0226 DOOR RAIL SUPPORT CLIPS 010-00-62107 CONVEYOR SHIELD MOUNT 010-00-162

MODEL 2425 CENTRE-SIDE DISCHARGE DOOR ASSEMBLY

D. RODGERS

015-10-02

MAY 17/00

2425 1 of 1

1

PARTS LISTQTY

CENTRE SIDE DOOR (ONE-PIECE)PART DESC.

1NO.

010-00-84PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 CYLINDER BRACKETS 010-00-2343 DOOR GUIDES 010-00-834

DOOR RAIL CLIPSSHIELD HINGE (Ø3/8" X 1-1/2" BOLT)

45

010-00-82140-00-17

82

STANDARD RESTRICTOR BLADE ASSEMBLY

D. RODGERS

015-11-01

MAY 1/00

2425 1 of 1

2

PARTS LISTQTY

SIDE BRACKETS*

PART DESC.1

NO.

010-02-02

PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2END PLATES* 010-02-012

3 RESTRICTOR BLADE 010-01-0214 BOTTOM PIVOT PIN 010-01-0415 COTTER PIN 010-01-0616 HAIRPIN 010-01-0717 ADJUSTMENT PIN 010-01-0818 ADJUSTMENT PIN CAP 150-00-0219 RESTRICTOR BLADE GRIP 150-00-031

* - NOT INCLUDED W/ ASSEMBLY



02 - FRAME

MODEL 2425 COMPLETE FRAME ASSEMBLY (FRONT DISCHARGE)

D. RODGERS

025-05-01

MAY 5/00

2425 1 of 1

1

PARTS LISTQTY

BASE MODEL 2425 FRAME ASSEMBLYPART DESC.

1NO.

025-06-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 SCALE TUBE ASSEMBLY 025-14-0143 IMPLEMENT JACK ASSEMBLY 020-02-0114 TONGUE AND HITCH ASSEMBLY 025-12-0115 FRONT CROSSMEMBER ASSEMBLY 025-15-0116 CONVEYOR ATTACHMENT ASSEMBLY 025-08-0117 BRAKE PACKAGE ASSEMBLY* 025-13-0118 LIGHT PACKAGE ASSEMBLY* 025-20-011


MODEL 2425 COMPLETE FRAME ASSEMBLY (CENTRE-SIDE DISCHARGE)

D. RODGERS

025-05-02

MAY 18/00

2425 1 of 1

1

PARTS LISTQTY

BASE MODEL 2425 FRAME ASSEMBLYPART DESC.

1NO.

025-06-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 SCALE TUBE ASSEMBLY 025-14-0143 IMPLEMENT JACK ASSEMBLY 020-02-0114 TONGUE AND HITCH ASSEMBLY 025-12-0115 FRONT CROSSMEMBER ASSEMBLY 025-15-0116 BRAKE PACKAGE ASSEMBLY* 025-13-0117 LIGHT PACKAGE ASSEMBLY* 025-20-011


CONVEYOR ATTACHMENT ASSEMBLY FOR MODEL 2425 W/ FRONT DOOR DISCHARGE

D. RODGERS

025-08-01

MAY 8/00

ALL APPLICABLE 1 of 1

1*

PARTS LISTQTY

UNDERCARRIAGE BAR ASSEMBLYPART DESC.

1NO.

020-03-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 CONVEYOR MOUNT (PIECE 'A') 025-00-2623 CONVEYOR MOUNT (PIECE 'B') 025-00-2724 HYDRAULIC HOSE MOUNT 020-00-1325 HYDRAULIC HOSE CLIP 020-00-0916 Ø3/8" NUT 140-00-8517 Ø3/8" FLAT WASHER 140-00-661

* - 2 REQUIRED FOR DUAL CYLINDER LIFT KIT (WING EXTENSION CONVEYORS OVER 41" OVERALL LENGTH). - DELETE ASSEMBLY #020-03-01 IF DUAL DIRECTION DISCHARGE CONVEYOR OPTION SPECIFIED.

TONGUE AND HITCH ASSEMBLY FOR MODEL 2425

D. RODGERS

025-12-01

MAY 5/00

2425 1 of 1

1

PARTS LISTQTY

LEFT TONGUE SIDEPART DESC.

1NO.

025-00-31PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 RIGHT TONGUE SIDE 025-00-3213 ADJUSTABLE HITCH CRADLE 020-00-3114 SAFETY CHAIN HOOKUP BRACKET 020-00-3525 1ADJUSTABLE HITCH ASSEMBLY 020-10-00

MODEL 2425 - SCALE TUBE ASSEMBLY FOR TRAILER MODELS

D. RODGERS

025-14-01

MAY 5/00

2425 1 of 1

4

PARTS LISTQTY

WEIGHBAR SUPPORT TUBEPART DESC.

1NO.

025-00-17PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 WEIGHBAR SUPPORT TUBE MOUNT 025-00-1643 WEIGHBAR SUPPORT TUBE GUSSET 025-00-354

IMPLEMENT JACK ASSEMBLY

D. RODGERS

020-02-01

MAY 5/00


1

PARTS LISTQTY

IMPLEMENT JACK W/ HANDLEPART DESC.

1NO.

020-02-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 (2) INNER & (1) OUTER SLEEVE KIT 020-02-0313 (1) INNER SLEEVE* 020-02-041

PIN AND CHAIN KIT4 020-02-051IMPLEMENT JACK HANDLE ASSEMBLY5 020-02-061

* - INNER SLEEVE W/ PART NUMBER 030-00-19 SAME AS 020-02-04

UNDERCARRIAGE BAR ASSEMBLY FOR MODELS EQUIPPED W/ WING EXTENSION CONVEYORS

D. RODGERS

020-03-01

MAY 8/00


1

PARTS LISTQTY

WING LIFT SUPPORT TUBEPART DESC.

1NO.

020-00-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 SUPPORT PLATE 020-00-0513 TRIANGULAR SUPPORT PLATE 020-00-0614 UNDERCARRIAGE BAR MOUNT 020-00-0425 Ø1/2" X 1-1/2" BOLT 140-00-2466 Ø1/2" FLAT WASHER 140-00-6767 Ø1/2" LOCKWASHER 140-00-7268 Ø1/2" NUT 140-00-766

NOTE:

- 2 UNDERCARRIAGE BAR ASSEMBLIES REQUIRED FOR DUAL CYLINDER LIFT KIT.- DUAL CYLINDER LIFT KIT USED ON MODELS EQUIPPED W/ WING EXTENSION CONVEYORS OVER 41" OVERALL LENGTH.

FRONT FRAMERAILS (TYPICAL)

ADJUSTABLE HITCH ASSEMBLY - INCLUDES BASE HITCH AND CLEVIS OPTION

D. RODGERS

020-10-00

MAY 9/00


1

PARTS LISTQTY

BASE HITCHPART DESC.

1NO.

020-10-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 CLEVIS OPTION 020-10-0213 BOLT 0.75-10UNC X 5.00 LG HEX HEAD 020-10-0314 LOCKNUT 0.75-10UNC HEX (GRD 8) 020-10-0445 BOLT 0.75-10UNC X 6.00 LG HEX HEAD 020-10-053

ADJUSTABLEHITCH CRADLE



03 - STAND

BASE STAND FRAME ASSEMBLY FOR MODEL 2425

D. RODGERS

035-05-01

APR 26/00

2425 1 of 1

4

PARTS LISTQTY

STAND LEGSPART DESC.

1NO.

030-00-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 TOP FRONT STAND TUBE 030-00-0413 TOP SIDE STAND TUBE 030-00-0514 FRONT AND REAR STAND TUBES 030-00-0625 SIDE STAND TUBES 030-00-0726 PLATFORM SUPPORT ANGLE - FRONT 030-00-0817 PLATFORM SUPPORT ANGLE - SIDE 030-00-0918 PLATFORM SUPPORT ANGLE - REAR 030-00-1019 PLATFORM GRATING - GALVANIZED 030-00-11110 STAND LADDER HANDLES 030-00-122

030-00-14HOSE HOLDER (4-SLOT)11 1030-00-19IMPLEMENT JACK INNER SLEEVE12 1030-00-20DRIVESHAFT SHIELD MOUNT ANGLE13 1030-00-23SCALE INDICATOR MOUNTING TUBE14 2030-00-24SCALE INDICATOR MOUNT BRACKET15 1030-00-25URETHANE WASHER16 1030-00-34WIRE/ROPE TIE17 1140-00-67Ø1/2" FLAT WASHER18 1140-00-89Ø1/2" LOCKNUT19 1150-00-04PLASTIC END CAPS20 4

RESERVOIR MOUNT21 1 030-00-30



04 - WHEELS

8,000lb, 8 BOLT HUB COMPLETE ASSEMBLY AND COMPONENTS (W/O SPINDLE)

D. RODGERS

040-01-00

MAY 4/00


1

PARTS LISTQTY

8,000lb 8BH CASTINGPART DESC.

1NO.

040-01-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 INNER BEARING RACE 040-01-0213 INNER BEARING 040-01-0314 OUTER BEARING RACE 040-01-0415 OUTER BEARING 040-01-0516 GREASE SEAL 040-01-0617 WASHER 040-01-0818 AXLE NUT 040-01-0919 COTTER PIN 040-01-10110 DUST CAP 040-01-111

040-01-12GREASE NIPPLE11 1040-01-13WHEEL STUD (PRESSED IN)12 8040-01-14WHEEL NUT13 8VARIES8,000lb SPINDLE14 1

8,000lb, 8 BOLT HUB - DUST CAP ASSEMBLY

D. RODGERS

040-01-50

MAY 4/00


PARTS LISTQTYPART DESC.NO. PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

DUST CAP 040-01-111040-01-12GREASE NIPPLE2 1

1

8,000lb, 8 BOLT HUB - BEARING AND SEAL KIT

D. RODGERS

040-01-51

MAY 4/00


PARTS LISTQTYPART DESC.NO. PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

1 INNER BEARING RACE 040-01-0212 INNER BEARING 040-01-0313 OUTER BEARING RACE 040-01-0414 OUTER BEARING 040-01-0515 GREASE SEAL 040-01-061

8,000lb, 8 BOLT HUB - ALL ASSEMBLY COMPONENTS EXCEPT AXLE NUT, WASHER, & COTTER PIN

D. RODGERS

040-01-52

MAY 4/00


1

PARTS LISTQTY

8,000lb 8BH CASTINGPART DESC.

1NO.

040-01-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 INNER BEARING RACE 040-01-0213 INNER BEARING 040-01-0314 OUTER BEARING RACE 040-01-0415 OUTER BEARING 040-01-0516 GREASE SEAL 040-01-061

DUST CAP 040-01-111040-01-12GREASE NIPPLE 1040-01-13WHEEL STUD (PRESSED IN) 8040-01-14WHEEL NUT10 8VARIES8,000lb SPINDLE11 1

789

WHEEL ASSEMBLY - 12.5X16, 12 PLY FIRESTONE TIRE W/ TUBE ON 16X10, 8 BOLT, 6,000lb RIM

D. RODGERS

040-07-01

MAY 4/00


1

PARTS LISTQTY

RIM - 16X10, 8 BOLT, 6,000lbPART DESC.

1NO.

040-07-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 TUBE - 12.5X16 040-07-0313 FIRESTONE TIRE - 12.5X16, 12 PLY 040-07-041



05 - AUGER

COMPLETE AUGER ASSEMBLY FOR MODEL 2425 - 2000 SERIES 'A' (SLOPED TOP)

D. RODGERS

055-05-01

MAY 4/00

2425 1 of 1

1

PARTS LISTQTY

BASE MODEL 2425 AUGERPART DESC.

1NO.

055-00-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 KNIFE KIT - 9-PIECE W/ HARDWARE 055-06-0113 ANGLING BLADE ASSEMBLY 055-07-0114 FASTENING RING 050-00-2115 SUPPORT RING FOR AUGER CAP 057-00-0416 AUGER CAP 057-00-0317 Ø3/8" X 1" BOLTS 140-00-1268 Ø3/8" LOCKWASHERS 140-00-716

KNIFE KIT ASSEMBLY FOR MODEL 2425 AUGER - 2000 SERIES 'A' (SLOPED TOP), 9 PIECES

D. RODGERS

055-06-01

MAY 4/00

2425 1 of 1

9

PARTS LISTQTY

OSM-22X JAY-LOR CUTTER BLADE 1/4"PART DESC.

1NO.

050-00-13PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 Ø1/2" X 1-1/2 CARRIAGE BOLTS 050-00-11363 Ø1/2" NUTS 050-00-1236

* - SINGLE KNIFE ASSEMBLY USE P/N- 050-06-02-

ANGLING BLADE ASSEMBLY FOR MODEL 2425 - 2000 SERIES 'A' (SLOPED TOP)

D. RODGERS

055-07-01

MAY 5/00

2425 1 of 1

PARTS LISTQTYPART DESC.

1NO. PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2ANGLING BLADE 050-00-071ANGLING BLADE EXTENSION* 050-00-221




06 - CONVEYOR

CONVEYOR CHAIN COUPLER DRIVE ASSEMBLY

D. RODGERS

060-03-00

MAY 23/00


1

PARTS LISTQTY

CONNECTING CHAIN (#40)PART DESC.

1NO.

060-03-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 Ø1", 16-TOOTH SPROCKET 060-03-0313 Ø1-1/8", 16-TOOTH SPROCKET 060-03-0514 KEY 060-03-061

DRIVESHAFTASSEMBLY

HYDRAULICMOTOR

8' (96") DUAL DISCHARGE CONVEYOR ASSEMBLY - COMPLETE W/O SHIELDS AND HOSES

D. RODGERS

060-04-01

APR 28/00


1

PARTS LISTQTY

8' (96") DUAL CONVEYOR W/O CHAINPART DESC.

1NO.

060-04-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 COMPLETE APRON CHAIN ASSEMBLY 060-04-051APRON CHAIN PER FOOT (C-55 W)3 060-01-001CHAIN LINK (C-55 W)4 060-01-011LINK CONNECTOR PIN (C-55 W)5 060-01-031TWO LINKS W/ SLAT (C-55 W)6 060-01-041

8' (96") DUAL DISCHARGE CONVEYOR ASSEMBLY: COMPLETE W/O APRON CHAIN, SHIELDS, AND HOSES

D. RODGERS

060-04-02

MAY 23/00


1

PARTS LISTQTY

ADJUSTABLE FLOORPART DESC.

1NO.

060-00-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 8' (96") LEFT CONVEYOR SIDE 060-00-1213 8' (96") RIGHT CONVEYOR SIDE 060-00-1314 CONVEYOR FLOOR 060-00-1415 CONVEYOR FLOOR SUPPORTS 060-00-1856 FLANGE BEARING 060-00-2047 BEARING HOLDER (CHAIN TIGHTNER) 060-00-2128 TIGHTNER ROD 060-00-2229 TIGHTNER ROD SUPPORT BRACKET 060-00-23210 CAST SPROCKET (IDLER SHAFT SIDE) 060-00-272

060-00-30CAST SPROCKET (KEYED)11 2060-00-31HYDRAULIC MOTOR MOUNT12 1060-00-32REMOVABLE MOTOR MOUNT COVER13 1060-00-33MOTOR MOUNT BACK PLATE14 1060-00-40REMOVABLE COVER MOUNT15 1060-03-00CHAIN COUPLER DRIVE ASSEMBLY16 1060-04-08DRIVESHAFT ASSEMBLY17 1060-04-09IDLER SHAFT ASSEMBLY18 1090-00-26HYDRAULIC MOTOR19 1


D. RODGERS

060-04-02

MAY 23/00


1

PARTS LISTQTY


1NO.

060-00-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:



9'-2" (110") DUAL DISCHARGE CONVEYOR ASSEMBLY - COMPLETE W/O SHIELDS AND HOSES

D. RODGERS

060-05-01

MAY 25/00


1

PARTS LISTQTY

9'-2" DUAL CONVEYOR W/O CHAINPART DESC.

1NO.

060-05-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 COMPLETE APRON CHAIN ASSEMBLY 060-05-051APRON CHAIN PER FOOT (C-55 W)3 060-01-001CHAIN LINK (C-55 W)4 060-01-011LINK CONNECTOR PIN (C-55 W)5 060-01-031TWO LINKS W/ SLAT (C-55 W)6 060-01-041

9'-2" (110") DUAL DISCHARGE CONVEYOR ASSEMBLY: COMPLETE W/O APRON CHAIN, SHIELDS, AND HOSES

D. RODGERS

060-05-02

MAY 25/00


1

PARTS LISTQTY


1NO.

060-00-56PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 9'-2" (110") LEFT CONVEYOR SIDE 060-00-1513 9'-2" (110") RIGHT CONVEYOR SIDE 060-00-1614 CONVEYOR FLOOR 060-00-1715 CONVEYOR FLOOR SUPPORTS 060-00-1866 FLANGE BEARING 060-00-2047 BEARING HOLDER (CHAIN TIGHTNER) 060-00-2128 TIGHTNER ROD 060-00-2229 TIGHTNER ROD SUPPORT BRACKET 060-00-23210 CAST SPROCKET (IDLER SHAFT SIDE) 060-00-272



D. RODGERS

060-05-02

MAY 25/00


1

PARTS LISTQTY


1NO.

060-00-56PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 9'-2" (110") LEFT CONVEYOR SIDE 060-00-1513 9'-2" (110") RIGHT CONVEYOR SIDE 060-00-1614 CONVEYOR FLOOR 060-00-1715 CONVEYOR FLOOR SUPPORTS 060-00-1866 FLANGE BEARING 060-00-2047 BEARING HOLDER (CHAIN TIGHTNER) 060-00-2128 TIGHTNER ROD 060-00-2229 TIGHTNER ROD SUPPORT BRACKET 060-00-23210 CAST SPROCKET (IDLER SHAFT SIDE) 060-00-272



D. RODGERS

060-05-02

MAY 25/00


1

PARTS LISTQTY


1NO.

060-00-56PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:



6' CONVEYOR W/ 60" WING EXTENSION: COMPLETE W/O SHIELDS, AND HOSES

D. RODGERS

060-07-01

MAY 24/00


1

PARTS LISTQTY

CONVEYOR W/O APRON CHAINPART DESC.

1NO.

060-07-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 COMPLETE APRON CHAIN ASSEMBLY 060-07-0513 APRON CHAIN PER FOOT (C-55 W) 060-01-0014 CHAIN LINK (C-55 W) 060-01-0115 LINK CONNECTOR PIN (C-55 W) 060-01-0316 TWO LINKS W/ SLAT (C-55 W) 060-01-041

6' CONVEYOR W/ 60" WING EXTENSION: COMPLETE ASSEMBLY W/O APRON CHAIN, SHIELDS, AND HOSES

D. RODGERS

060-07-02

MAY 24/00


1

PARTS LISTQTY

6' (72") FLAT CONVEYOR ASSEMBLY*PART DESC.

1NO.

060-07-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 60" WING EXTENSION ASSEMBLY 060-07-041

* - ASSEMBLY # 060-07-03 IDENTICAL TO ASSEMBLY # 060-08-03.

60" WING EXTENSION CONVEYOR ASSEMBLY

D. RODGERS

060-07-04

MAY 24/00


1

PARTS LISTQTY

60" LEFT CONVEYOR SIDEPART DESC.

1NO.

060-00-09PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 60" RIGHT CONVEYOR SIDE 060-00-1013 WING CONVEYOR FLOOR 060-00-1114 CONVEYOR FLOOR SUPPORTS 060-00-1935 FLANGE BEARING 060-00-2026 CAST SPROCKET (KEYED) 060-00-3027 HYDRAULIC MOTOR MOUNT 060-00-3118 REMOVABLE MOTOR MOUNT COVER 060-00-3219 MOTOR MOUNT BACK PLATE 060-00-33110 REMOVABLE COVER MOUNT 060-00-401

060-00-34CYLINDER SIDE SUPPORTS11 2060-00-35CYLINDER MOUNT CROSSPIECE12 1060-00-41CYLINDER MOUNT13 2060-00-38LOWER TEFLON BLOCK14 2060-00-39LOWER TEFLON BLOCK SPACERS15 4060-03-00CHAIN COUPLER DRIVE ASSEMBLY16 1060-07-08DRIVESHAFT ASSEMBLY17 1060-07-11CENTRE IDLER SHAFT ASSEMBLY18 1090-00-26HYDRAULIC MOTOR19 1

6' CONVEYOR W/ 41" WING EXTENSION: COMPLETE W/O SHIELDS, AND HOSES

D. RODGERS

060-08-01

MAY 23/00


1

PARTS LISTQTY

CONVEYOR W/O APRON CHAINPART DESC.

1NO.

060-08-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 COMPLETE APRON CHAIN ASSEMBLY 060-08-0513 APRON CHAIN PER FOOT (C-55 W) 060-01-0014 CHAIN LINK (C-55 W) 060-01-0115 LINK CONNECTOR PIN (C-55 W) 060-01-0316 TWO LINKS W/ SLAT (C-55W) 060-01-041

6' CONVEYOR W/ 41" WING EXTENSION: COMPLETE ASSEMBLY W/O APRON CHAIN, SHIELDS, AND HOSES

D. RODGERS

060-08-02

MAY 23/00


1

PARTS LISTQTY

6' (72") FLAT CONVEYOR ASSEMBLYPART DESC.

1NO.

060-08-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 41" WING EXTENSION ASSEMBLY 060-08-041

6' (72") FLAT CONVEYOR ASSEMBLY (W/O WING EXTENSION OPTION, ALSO HAS PART # 060-07-03)

D. RODGERS

060-08-03

MAY 24/00


1

PARTS LISTQTY


1NO.

060-00-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:


060-00-36UPPER TEFLON BLOCK MOUNT11 2060-00-37UPPER TEFLON BLOCK12 2060-08-09IDLER SHAFT ASSEMBLY*13 1

* - ASSEMBLY # 060-08-09 ALSO HAS ASSEMBLY # 060-07-09.

NOTE:

- 6' FLAT CONVEYOR ASSEMBLY W/ # 060-08-03 SAME AS ASSEMBLY #060-07-03.

41" WING EXTENSION CONVEYOR ASSEMBLY

D. RODGERS

060-08-04

MAY 23/00


1

PARTS LISTQTY

41" LEFT CONVEYOR SIDEPART DESC.

1NO.

060-00-06PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 41" RIGHT CONVEYOR SIDE 060-00-0713 WING CONVEYOR FLOOR 060-00-0814 CONVEYOR FLOOR SUPPORTS 060-00-1925 FLANGE BEARING 060-00-2026 CAST SPROCKET (KEYED) 060-00-3027 HYDRAULIC MOTOR MOUNT 060-00-3118 REMOVABLE MOTOR MOUNT COVER 060-00-3219 MOTOR MOUNT BACK PLATE 060-00-33110 REMOVABLE COVER MOUNT 060-00-401

060-00-34CYLINDER SIDE SUPPORTS11 2060-00-35CYLINDER MOUNT CROSSPIECE12 1060-00-41CYLINDER MOUNT13 1060-00-38LOWER TEFLON BLOCK14 2060-00-39LOWER TEFLON BLOCK SPACERS15 4060-03-00CHAIN COUPLER DRIVE ASSEMBLY16 1060-08-08DRIVESHAFT ASSEMBLY17 1060-08-11CENTRE IDLER SHAFT ASSEMBLY18 1090-00-26HYDRAULIC MOTOR19 1

ADJUSTABLE MAGNET CHUTE ASSEMBLY FOR STANDARD CONVEYORS

D. RODGERS

060-12-00

MAY 25/00


1

PARTS LISTQTY

BASE CHUTE ASSEMBLYPART DESC.

1NO.

060-12-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 MAGNET 060-12-0313 L. MAGNET MOUNT 060-12-0414 R. MAGNET MOUNT 060-12-0515 MAGNET PIN 140-00-9426 HAIRPIN 010-01-0727 Ø5/16" X 1" BOLTS 140-00-01108 Ø5/16" LOCKWASHERS 140-00-70109 Ø 5/16" NUTS 140-00-911010 Ø3/8" X 1" BOLTS 140-00-124

140-00-71Ø3/8" LOCKWASHERS11 4140-00-66Ø3/8" FLATWASHERS12 8140-00-85Ø3/8" NUTS13 4

STANDARD CONVEYOROPTION (TYPICAL)

MANUAL WING CONVEYOR LIFT ASSEMBLY - FOR 6' W/ 41" EXTENSION CONVEYORS W/ DELETION OF HYDRAULIC OPTION.

D. RODGERS

060-17-00

MAY 26/00

2425 1 of 1

1

PARTS LISTQTY

MANUAL LIFT WING BRACE*PART DESC.

1NO.

060-00-80PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 CONVEYOR ATTACHMENT ASSEMBLY 025-08-0113 6' CONVEYOR W/ 41" EXTENSION** 060-08-011

* - INCLUDES MOUNTING HARDWARE** - MANUAL LIFT OPTION AVAILABLE ONLY W/ 6' CONVEYOR W/ 41" WING EXTENSION.

TRAILER MODELFRAME (TYPICAL)



07 - DRIVELINE

STANDARD DRIVELINE ASSEMBLY FOR MODEL 1500 EQUIPPED W/ PGA 1602 VM BTI GEARBOX W/ CD 500 INPUT

D. RODGERS

075-05-02

JUL 18/00

1500 1 of 1

1

PARTS LISTQTY

PGA 1602 VM BTI GEARBOX W/ CD 500PART DESC.

1NO.

070-05-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 #8 DRIVESHAFT ASSEMBLY 070-00-1013 BEARING, PILLOW BLOCK 070-00-0714 #6 STANDARD PTO SHAFT (540 RPM) 070-03-0115 #8 CV PTO SHAFT (540 RPM) *OPTION* 070-24-011

* - ASSEMBLY #070-24-01 OPTION EXTRA, DELETES ASSEMBLY #070-03-01.

FRT

TO TRACTOR

STANDARD DRIVELINE ASSEMBLY FOR MODEL 2425 EQUIPPED W/ PGA 1602 VM BTI GEARBOX W/ CD 450 INPUT

D. RODGERS

075-05-03

JUL 18/00

2425 1 of 1

1

PARTS LISTQTY

PGA 1602 VM BTI GEARBOX W/ CD 450PART DESC.

1NO.

070-20-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 #8 DRIVESHAFT ASSEMBLY 070-04-0013 BEARING, PILLOW BLOCK 070-00-0714 #6 STANDARD PTO SHAFT (540 RPM) 070-03-0115 #8 CV PTO SHAFT (540 RPM) *OPTION* 070-24-011

* - ASSEMBLY #070-24-01 OPTION EXTRA, DELETES ASSEMBLY #070-03-01.

FRT

TO TRACTOR

COMPLETE #8 STANDARD DRIVESHAFT ASSEMBLY - W/ PUSH PIN YOKE (PRE-2000 SERIES)

D. RODGERS

070-00-10

MAY 19/00


1

PARTS LISTQTY

#8 YOKE - 1-3/4", 20-SPLINE (PUSH PIN)PART DESC.

1NO.

070-00-35PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 #8 CROSS (35.0mm X 106.5mm) 070-04-0213 #8 YOKE, TUBE END 070-04-0314 ROLL PIN FOR OUTER TUBE 070-04-041

TRACTOR END

FRT

MIXER END

#8 DRIVESHAFT W/ SPLINED END5 1 070-00-17

#6 PTO SHAFT: 1-3/8", 6-SPLINE TRACTOR END, 1-3/4" 20-SPLINE MIXER END (540 RPM)

D. RODGERS

070-03-01

JUL 19/00


1

PARTS LISTQTY

TRACTOR END YOKE (1-3/8", 6-SPLINE)PART DESC.

1NO.

070-00-24PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 #6 CROSS (30.2mm X 92.0mm) 070-00-1923 #6 YOKE, OUTER TUBE, TRACTOR END 070-00-3714 ROLL PIN FOR OUTER TUBE 070-00-4515 #6 PTO OUTER TUBE (TRACTOR END) 070-00-4716 BUSHING FOR OUTER TUBE 070-00-3017 #6 PTO INNER TUBE (MIXER END) 070-00-4818 #6 YOKE, INNER TUBE, MIXER END 070-00-3819 ROLL PIN FOR INNER TUBE 070-00-46110 MIXER END YOKE (1-3/4", 20-SPLINE)* 070-00-341

070-00-73SHEAR BOLT, 10mm X 60mm, GRD 8.811 1070-09-00#6 PTO SHAFT SHIELD ASSEMBLY12 1

FRT

MIXER END TRACTOR END

* - SHEAR BOLT YOKE ASSEMBLY

COMPLETE #8 STANDARD DRIVESHAFT ASSEMBLY - W/ SLIDE COLLAR YOKE

D. RODGERS

070-04-00

MAY 19/00


1

PARTS LISTQTY

#8 YOKE - 1-3/4", 20-SPLINEPART DESC.

1NO.

070-04-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 #8 CROSS (35.0mm X 106.5mm) 070-04-0213 #8 YOKE, TUBE END 070-04-0314 ROLL PIN FOR OUTER TUBE 070-04-041

TRACTOR END

FRT

MIXER END

#8 DRIVESHAFT W/ SPLINED END5 1 070-04-06

COMPLETE GUARD KIT FOR #6 STANDARD PTO SHAFT

D. RODGERS

070-09-00

JUL 19/00


1

PARTS LISTQTY

RETAINING COLLAR (TRACTOR END)PART DESC.

1NO.

070-00-39PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 CONE GUARD (TRACTOR END) 070-00-4213 OUTER TUBE SHIELD (TRACTOR END) 070-00-4314 INNER TUBE SHIELD (MIXER END) 070-00-4415 CONE GUARD (MIXER END) 070-00-4116 RETAINING COLLAR (MIXER END) 070-00-4017 GUARD BOLT (PLASTIC) 070-00-596

FRT


#8 CV PTO SHAFT: 1-3/8", 6-SPLINE TRACTOR END, 1-3/4" 20-SPLINE MIXER END (540 RPM)

D. RODGERS

070-24-01

JUL 20/00


1

PARTS LISTQTY

TRACTOR END YOKE (1-3/8", 6-SPLINE)PART DESC.

1NO.

070-04-20PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 #8 CROSS (35.0mm X 113.8mm) 070-04-2123 #8 CV YOKE, TRACTOR END 070-04-221

5 ROLL PIN FOR OUTER TUBE 070-04-041

7#8 PTO OUTER TUBE (TRACTOR END)

070-04-2518

BUSHING FOR OUTER TUBE070-04-261

9#8 PTO INNER TUBE (MIXER END)

070-04-271#8 YOKE, INNER TUBE, MIXER END070-04-281ROLL PIN FOR INNER TUBE070-04-021

12 MIXER END YOKE (1-3/4", 20-SPLINE)* 070-04-291070-04-30SHEAR BOLT, 12mm X 65mm, GRD 8.813 1070-24-50#8 CV PTO SHAFT SHIELD ASSEMBLY14 1

FRT


6 070-04-241

#8 YOKE, OUTER TUBE, TRACTOR END4 070-04-231

1011

* - SHEAR BOLT YOKE ASSEMBLY

#8 CROSS (35.0mm X 106.5mm)

COMPLETE GUARD KIT FOR #8 CV PTO SHAFT

D. RODGERS

070-24-50

JUL 20/00


1

PARTS LISTQTY

RETAINING COLLAR (TRACTOR END)

PART DESC.1

NO.

070-04-52

PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2CONE GUARD (TRACTOR END) 070-04-5313OUTER TUBE SHIELD (TRACTOR END) 070-04-5414INNER TUBE SHIELD (MIXER END) 070-04-5515CONE GUARD (MIXER END) 070-04-5616RETAINING COLLAR (MIXER END) 070-04-5717GUARD BOLT (PLASTIC) 070-00-596

FRT


OUTER CONE GUARD (TRACTOR END) 070-04-511

8



08 – LUBE SYSTEM

GREASE LINE ASSEMBLY FOR PGA 1602 VM (W/ CD 450 & 500)

D. RODGERS

080-01-00

MAY 23/00


1

PARTS LISTQTY

CONNECTOR (3300 X 2)PART DESC.

1NO.

080-01-05PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 GREASE NIPPLE 080-01-0613 MOUNTING BRACKET* 080-01-0814 GREASE LINE 080-09-0115 Ø3/8" FLAT WASHER 140-00-661

REAR OFPLANETARY

GEARBOX

* - MOUNTING BRACKET NOT INCLUDED W/ ASSEMBLY.

1/2 GALLON ACRYLIC RESERVOIR ASSEMBLY

D. RODGERS

080-04-00

MAY 19/00


1

PARTS LISTQTY

BREATHER CAPPART DESC.

1NO.

080-04-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 PLASTIC BUSHING 080-04-0313 ALUMINUM SHANK 080-04-0414 O-RING FOR ALUMINUM SHANK 080-04-0515 CONNECTING PIPE 080-04-0616 RESERVOIR BOTTOM PLATE 080-04-0717 RESERVOIR TOP PLATE 080-04-0818 WASHER 080-04-0919 RESERVOIR CLOSURE 080-04-10110 ACRYLIC RESERVOIR BODY 080-04-111

080-04-12RUBBER GASKET11 1080-04-13RESERVOIR NUT12 1

ACRYLIC RESERVOIR MOUNTING ASSEMBLY

D. RODGERS

080-07-00

MAY 23/00


1

PARTS LISTQTY

Ø1/2" COUPLINGPART DESC.

1NO.

080-07-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 Ø1/2" NIPPLE 080-07-0213 Ø1/2" NPT ELBOW 080-07-0314 PIPE CLAMP 080-07-0625 Ø3/8" LOCK WASHER 140-00-7146 Ø3/8" NUT 140-00-854

STANDFRAME

COMPLETE EXTERNAL OIL RESERVOIR ASSEMBLY: INCLUDES RESERVOIR, HOSE KIT, FITTINGS, AND HARDWARE

D. RODGERS

080-13-00

MAY 19/00


1

PARTS LISTQTY

ACRYLIC RESERVOIR ASSEMBLYPART DESC.

1NO.

080-04-00PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 RESERVOIR MOUNTING ASSEMBLY 080-07-0013 HOSE 080-07-0414 HYDRAULIC ELBOW 080-07-051

PLANETARYGEARBOX

STANDFRAME

COMPLETE INTERNAL OIL OVERFLOW RESERVOIR ASSEMBLY: INCLUDES RESERVOIR, HOSE KIT, AND FITTINGS.

D. RODGERS

080-21-01

JUL 11/00


1

PARTS LISTQTY

OIL OVERFLOW RESERVOIRPART DESC.

1NO.

080-21-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 OIL BREATHER LINE ASSEMBLY 080-00-5313 3/8" NPT TO 1/4" JIC NIPPLE 080-00-5214 1/4" NPT STREET ELBOW 90° 080-00-511

FRT

PLANETARY GEARBOX

INTERNAL GREASE LINE PROTECTOR ASSEMBLY

D. RODGERS

080-41-02

JUL 11/00


1

PARTS LISTQTY

GREASE LINE PROTECTOR ASSEMBLYPART DESC.

1NO.

080-41-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 GREASE LINE 080-09-011

FRT

PLANETARY GEARBOX



09 – HYDRAULICS

FRONT DISCHARGE DOOR HYDRAULIC ASSEMBLY W/ CYLINDER

D. RODGERS

090-20-00

JUL 14/00


1

PARTS LISTQTY

FRONT DOOR CYLINDER (66")PART DESC.

1NO.

090-03-00PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 PRESSURE RELIEF VALVE 090-00-2113 PIONEER ENDS 090-00-1924 HOSE AND FITTING ASSEMBLY 090-20-031

FRT

TO TRACTOR

TO TRACTOR

CENTER-SIDE DISCHARGE DOOR HYDRAULIC ASSEMBLY W/ CYLINDER

D. RODGERS

090-22-00

JUL 17/00


1

PARTS LISTQTY

C-SIDE DOOR CYLINDER (56")PART DESC.

1NO.

090-02-00PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 PRESSURE RELIEF VALVE 090-00-2113 PIONEER ENDS 090-00-1924 HOSE AND FITTING ASSEMBLY 090-22-031

FRTTO TRACTOR

6' CONVEYOR W/ 41" WING EXTENSION HYDRAULIC ASSEMBLY W/ CYLINDER AND LOCK COLLARS

D. RODGERS

090-30-00

JUL 17/00


1

PARTS LISTQTY

12" LIFT CYLINDERPART DESC.

1NO.

090-10-00PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 LOCK COLLAR KIT 090-00-6013 CHECK VALVE 090-00-011

5 HOSE AND FITTING ASSEMBLY 16 HYDRAULIC MOTOR*

090-30-031

* - HYDRAULIC MOTOR NOT INCLUDED IN ASSEMBLY.

TO TRACTOR

TO TRACTOR

090-00-26

PIONEER ENDS4 090-00-192

TO CONVEYOR

DRIVE ASSEMBLY

HYDRAULIC ASSEMBLY FOR 8'/9'2" DUAL CONVEYORS, AND 6' CONVEYOR W/ 41" WING EXTENSION (MANUAL LIFT)

D. RODGERS

090-32-00

JUL 17/00


2

PARTS LISTQTY

PIONEER ENDSPART DESC.

1NO.

090-00-19PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 HOSE AND FITTING ASSEMBLY 090-32-0313 HYDRAULIC MOTOR* 090-00-261

* - HYDRAULIC MOTOR NOT INCLUDED IN ASSEMBLY

TO TRACTOR

TO CONVEYOR

DRIVE ASSEMBLY

TO TRACTOR

6' CONVEYOR W/ 60" WING EXTENSION HYDRAULIC ASSEMBLY W/ CYLINDERS AND LOCK COLLARS

D. RODGERS

090-34-00

JUL 17/00


2

PARTS LISTQTY

12" LIFT CYLINDERPART DESC.

1NO.

090-10-00PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 LOCK COLLAR KIT 090-00-6023 CHECK VALVE 090-00-011

5 HOSE AND FITTING ASSEMBLY 16 HYDRAULIC MOTOR*

090-34-031

* - HYDRAULIC MOTOR NOT INCLUDED IN ASSEMBLY.

TO TRACTOR

TO TRACTOR

090-00-26

PIONEER ENDS4 090-00-193

TO CONVEYOR

DRIVE ASSEMBLY



10 – SCALES

TYPICAL SCALE SYSTEM PACKAGE FOR MODEL 2425 W/ FRONT OR CENTRE-SIDE DISCHARGE

D. RODGERS

105-00-00

MAY 29/00

2425 1 of 1

1

PARTS LISTQTY

SCALE POWER CORD (18' OVERALL)PART DESC.

1NO.

100-00-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 TRACTOR PLUG ASSEMBLY 100-00-0213 REMOTE ZERO RESET KIT 100-00-0714 WIRE SPLICE/REPAIR KIT 100-00-1015 SCALE HEAD MOUNTING PLATE 100-00-1116 EXTRA ZERO RESET TRANSMITTER 100-00-2617 ANTI-VIBRATION INDICATOR MOUNTS 100-00-4948 SCALE INDICATOR OPTION* VARIES*19 REMOTE DISPLAY SCALE INDICATOR* VARIES*110 Ø2-1/8" WEIGHBAR W/ CORD 105-00-054

* - SCALE INDICATOR MODELS VARY W/ OPTIONS SELECTED FOR YOUR JAY-LOR PRODUCT.

STAND FRAMEASSEMBLY



11 – SHIELDS

DOOR SHIELD ASSEMBLY FOR MODELS EQUIPPED W/ CENTRE-SIDE DISCHARGE

D. RODGERS

110-01-00

MAY 29/00


1

PARTS LISTQTY

CENTRE-SIDE DOOR SHIELDPART DESC.

1NO.

110-01-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

23

Ø3/8" LOCKNUT 140-00-782Ø3/8" FLATWASHER 140-00-662

CENTRE-SIDE DISCHARGEDRUM ASSEMBLY

STANDARD DISCHARGE CHUTE FOR MODELS EQUIPPED W/ CENTRE-SIDE DISCHARGE

D. RODGERS

110-02-00

MAY 29/00


1

PARTS LISTQTY

CENTRE-SIDE DISCHARGE CHUTEPART DESC.

1NO.

110-02-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 Ø3/8" X 2" BOLT 140-00-1323 Ø3/8" LOCKNUT 140-00-7824 Ø3/8" NUT 140-00-8515 Ø3/8" FLATWASHER 140-00-6656 Ø3/8" X 1" BOLT 140-00-1217 Ø3/8" LOCKWASHER 140-00-711

CENTRE-SIDE DISCHARGEDRUM ASSEMBLY

DOOR SHIELDASSEMBLY

CONVEYOR CLEANOUT BOOT ASSEMBLY - FOR USE ON LEFT/RIGHT DISCHARGE DIRECTION CONVEYORS

D. RODGERS

110-04-00

MAY 31/00


1

PARTS LISTQTY

CONVEYOR BOOT SHIELDPART DESC.

1NO.

110-04-01PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 CONVEYOR BOOT PIN 110-04-0313 PLASTIC SPACER BLOCK 110-00-3524 HAIR PIN 010-01-0715 CONVEYOR BOOT PIN CAP 150-00-0116 Ø3/8" X 1" HINGE BOLTS 140-00-1227 Ø3/8" HINGE LOCKNUTS 140-00-7828 Ø3/8" FLAT WASHERS 140-00-662

NON-DISCHARGE END OF TYPICALLEFT/RIGHT DISCHARGE CONVEYOR

LOWER SHIELD ASSEMBLY FOR 6' CONVEYOR W/ 41" WING EXTENSION (ASSEMBLY #060-08-01)

D. RODGERS

110-10-01

MAY 31/00


1

PARTS LISTQTY

6' CONVEYOR PLASTIC SHIELDPART DESC.

1NO.

110-00-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 SUPPORT ANGLE 110-00-0333 RUBBER/PLASTIC SUPPORT ANGLE 110-00-0514 RUBBER FLAP RETAINER 110-00-0715 RUBBER FLAP 110-00-0816 41" EXTENSION PLASTIC SHIELD 110-00-3417 SUPPORT ANGLE 110-00-3628 CONVEYOR BOLTS (Ø1/2" X 2")* 140-00-2589 CONVEYOR MOUNTING NUTS ( Ø1/2")* 140-00-76810 Ø1/2" FLAT WASHERS* 140-00-678

140-00-72Ø1/2" LOCKWASHERS*11 8140-00-18Ø3/8" X 2-1/2" CARRIAGE BOLTS12 2140-00-21Ø3/8" X 1-1/2" CARRIAGE BOLTS13 3140-00-85Ø3/8" NUTS14 19140-00-66Ø3/8" FLAT WASHERS**15 24

140-00-17Ø3/8" X 1-1/2" BOLTS17 12140-00-12Ø3/8" X 1" BOLTS18 4

Ø3/8" LOCKWASHERS16 140-00-7119

6' CONVEYOR W/ 41" WING EXTENSION(ASSEMBLY #060-08-01)

* - USED FOR MOUNTING CONVEYOR ASSEMBLY TO TYPICAL JAY-LOR FRAME UNIT.** - STACK 5 FLAT WASHERS EACH SIDE AS SPACER FOR WING EXTENSION MOVEMENT.

TOP SHIELD ASSEMBLY FOR 6' CONVEYOR W/ 41" WING EXTENSION (ASSEMBLY #060-08-01)

D. RODGERS

110-11-01

JUN 2/00


1

PARTS LISTQTY

SHIELD MOUNT SUPPORT BRACKETPART DESC.

1NO.

110-00-13PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 DRUM SIDE SHIELD 110-00-1413 SHIELD CORNER ANGLES 110-00-1624 FRONT SHIELD (STAND SIDE) 110-00-1715 SHIELD SUPPORT CLIP 110-00-2126 WING SHIELD (STAND SIDE) 110-00-2217 WING SHIELD (DRUM SIDE) 110-00-2418 DRUM SIDE SHIELD (WING END) 110-00-2619 LEFT RUBBER SHIELD (WING END)* 110-00-27110 RIGHT RUBBER SHIELD (WING END)* 110-00-281

110-00-61CONVEYOR END SHIELD11 1110-00-62WING SHIELD SUPPORT TUBE**12 1113-00-01WING SHIELD SUPPORT TUBE**13 1140-00-18Ø3/8" X 2-1/2" CARRIAGE BOLTS14 2140-00-14Ø3/8" X 2-1/2" BOLTS15 2140-00-12Ø3/8" X 1" BOLTS16 31140-00-85Ø3/8" NUTS17 39140-00-66Ø3/8" FLAT WASHERS18 39140-00-71Ø3/8" LOCKWASHERS19 39

* - USE PART #110-00-27 FOR LEFT DISCHARGE DIRECTION UNITS. USE PART #110-00-28 FOR RIGHT DISCHARGE DIRECTION UNITS.** - PART #110-00-62 APPLIES TO ALL MODELS EXCEPT MODEL 2350. USE PART #113-00-01 FOR MODEL 2350.

FRT

TO STAND ASSEMBLY

TO

MA

CH

INE

FR

AM

E

NOTE: LEFT DISCHARGE ASSEMBLY SHOWN.


LOWER SHIELD ASSEMBLY FOR 6' CONVEYOR W/ 60" WING EXTENSION (ASSEMBLY #060-07-01)

D. RODGERS

110-10-02

MAY 31/00


1

PARTS LISTQTY

6' CONVEYOR PLASTIC SHIELDPART DESC.

1NO.

110-00-02PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 SUPPORT ANGLE 110-00-0333 RUBBER/PLASTIC SUPPORT ANGLE 110-00-0514 RUBBER FLAP RETAINER 110-00-0715 RUBBER FLAP 110-00-0816 60" EXTENSION PLASTIC SHIELD 110-00-6017 SUPPORT ANGLE 110-00-3648 CONVEYOR BOLTS (Ø1/2" X 2")* 140-00-2589 CONVEYOR MOUNTING NUTS ( Ø1/2")* 140-00-76810 Ø1/2" FLAT WASHERS* 140-00-678

140-00-72Ø1/2" LOCKWASHERS*11 8140-00-18Ø3/8" X 2-1/2" CARRIAGE BOLTS12 2140-00-21Ø3/8" X 1-1/2" CARRIAGE BOLTS13 3140-00-85Ø3/8" NUTS14 23140-00-66Ø3/8" FLAT WASHERS**15 28

140-00-17Ø3/8" X 1-1/2" BOLTS17 16140-00-12Ø3/8" X 1" BOLTS18 4

Ø3/8" LOCKWASHERS16 140-00-7123

* - USED FOR MOUNTING CONVEYOR ASSEMBLY TO TYPICAL JAY-LOR FRAME UNIT.** - STACK 5 FLAT WASHERS EACH SIDE AS SPACER FOR WING EXTENSION MOVEMENT.


TOP SHIELD ASSEMBLY FOR 6' CONVEYOR W/ 60" WING EXTENSION (ASSEMBLY #060-07-01)

D. RODGERS

110-11-02

JUN 2/00


1

PARTS LISTQTY

SHIELD MOUNT SUPPORT BRACKETPART DESC.

1NO.

110-00-13PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 DRUM SIDE SHIELD 110-00-1413 SHIELD CORNER ANGLES 110-00-1624 FRONT SHIELD (STAND SIDE) 110-00-1715 SHIELD SUPPORT CLIP 110-00-2126 WING SHIELD (STAND SIDE) 110-00-2317 WING SHIELD (DRUM SIDE) 110-00-2518 DRUM SIDE SHIELD (WING END) 110-00-2619 LEFT RUBBER SHIELD (WING END)* 110-00-27110 RIGHT RUBBER SHIELD (WING END)* 110-00-281

110-00-61CONVEYOR END SHIELD11 1110-00-62WING SHIELD SUPPORT TUBE**12 1113-00-01WING SHIELD SUPPORT TUBE**13 1140-00-18Ø3/8" X 2-1/2" CARRIAGE BOLTS14 2140-00-14Ø3/8" X 2-1/2" BOLTS15 2140-00-12Ø3/8" X 1" BOLTS16 33140-00-85Ø3/8" NUTS17 42140-00-66Ø3/8" FLAT WASHERS18 42140-00-71Ø3/8" LOCKWASHERS19 42

* - USE PART #110-00-27 FOR LEFT DISCHARGE DIRECTION UNITS. USE PART #110-00-28 FOR RIGHT DISCHARGE DIRECTION UNITS.** - PART #110-00-62 APPLIES TO ALL MODELS EXCEPT MODEL 2350. USE PART #113-00-01 FOR MODEL 2350.

FRT

TO STAND ASSEMBLY

TO

MA

CH

INE

FR

AM

E

NOTE: LEFT DISCHARGE ASSEMBLY SHOWN.


TOP SHIELD ASSEMBLY FOR 9'-2" DUAL DIRECTION DISCHARGE CONVEYOR (ASSEMBLY #060-05-01)

D. RODGERS

110-12-01

JUN 9/00


4

PARTS LISTQTY

SHIELD SUPPORT CLIPPART DESC.

1NO.

110-00-21PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 DRUM SIDE SHIELD 110-00-3023 RUBBER GUARD 110-00-3824 END SHIELDS (STAND SIDE) 110-00-4025 CENTRE SHIELD (STAND SIDE) 110-00-4116 Ø3/8" X 1" BOLTS 140-00-12307 Ø3/8" NUTS 140-00-85348 Ø3/8" FLAT WASHERS 140-00-66349 Ø3/8" LOCKWASHERS 140-00-7134

FRT

TO STAND ASSEMBLY

TO DRUM ASSEMBLY

9'-2" DUAL DISCHARGE CONVEYOR(ASSEMBLY #060-05-01)

TOP SHIELD ASSEMBLY FOR 8' DUAL DIRECTION DISCHARGE CONVEYOR (ASSEMBLY #060-04-01)

D. RODGERS

110-12-02

JUN 9/00


4

PARTS LISTQTY

SHIELD SUPPORT CLIPPART DESC.

1NO.

110-00-21PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 DRUM SIDE SHIELD 110-00-3123 RUBBER GUARD 110-00-3924 END SHIELDS (STAND SIDE) 110-00-4825 CENTRE SHIELD (STAND SIDE) 110-00-4116 Ø3/8" X 1" BOLTS 140-00-12287 Ø3/8" NUTS 140-00-85328 Ø3/8" FLAT WASHERS 140-00-66329 Ø3/8" LOCKWASHERS 140-00-7132

FRT

TO STAND ASSEMBLY

TO DRUM ASSEMBLY

8' DUAL DISCHARGE CONVEYOR(ASSEMBLY #060-04-01)

LOWER SHIELD ASSEMBLY FOR 8' AND 9'-2" DUAL DISCHARGE CONVEYORS (ASSEMBLIES #060-04-01 AND #060-05-01)

D. RODGERS

110-13-01

JUN 9/00


3

PARTS LISTQTY

SHIELD SUPPORT ANGLEPART DESC.

1NO.

110-00-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 PLASTIC SHIELD 110-00-1113 RUBBER/PLASTIC SUPPORT ANGLE 110-00-0624 RUBBER FLAP RETAINER 110-00-0725 RUBBER FLAP 110-00-082

Ø3/8" NUTS 140-00-8518Ø3/8" FLAT WASHERS 140-00-6618Ø3/8" LOCKWASHERS 140-00-7118

CONVEYOR BOLTS (Ø1/2" X 2")*6 140-00-258CONVEYOR MOUNTING NUTS ( Ø1/2")*7 140-00-768Ø1/2" FLAT WASHERS*8 140-00-678Ø1/2" LOCKWASHERS*9 140-00-728Ø3/8" X 1-1/2" BOLTS10 140-00-176Ø3/8" X 1" BOLTS11 140-00-1212

121314

8' OR 9'2" DUAL DIRECTION DISCHARGE CONVEYOR(ASSEMBLY #060-04-01 OR #060-05-01)

* - USED FOR MOUNTING CONVEYOR ASSEMBLY TO TYPICAL JAY-LOR FRAME UNIT.

STANDARD DRIVELINE SHIELD PACKAGE FOR MODEL 2425 W/ FRONT DOOR DISCHARGE

D. RODGERS

115-05-01

MAY 29/00

2425 1 of 1

1

PARTS LISTQTY

FRONT DRIVESHAFT SHIELDPART DESC.

1NO.

115-00-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

2 RUBBER PTO SHIELD (UNDERSIDE) 110-00-5413 Ø3/8" X 1-1/2" BOLTS 140-00-1794 Ø3/8" NUTS 140-00-8595 Ø3/8" FLATWASHERS 140-00-6696 Ø3/8" LOCKWASHERS 140-00-7197 SHEAR BOLTS (USE APPROVED ONLY)* 070-00-8248 10 MM LOCKNUT* 140-00-864

* - SHEAR BOLTS NOT INCLUDED W/ SHIELD ASSEMBLY. - USE ONLY SHEAR BOLTS THAT ARE APPROVED FOR USE W/ SELECTED PTO SHAFT OPTION.

STANDARD DRIVELINE SHIELD PACKAGE FOR MODEL 2425 W/ CENTRE-SIDE DOOR DISCHARGE

D. RODGERS

115-05-02

MAY 29/00

2425 1 of 1

1

PARTS LISTQTY

FRONT DRIVESHAFT SHIELDPART DESC.

1NO.

115-00-03PART NO.

PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

3 RUBBER PTO SHIELD (UNDERSIDE) 110-00-5414 Ø3/8" X 1-1/2" BOLTS 140-00-17135 Ø3/8" NUTS 140-00-85136 Ø3/8" FLATWASHERS 140-00-66137 Ø3/8" LOCKWASHERS 140-00-71138 SHEAR BOLTS (USE APPROVED ONLY)* 070-00-8249 10 MM LOCKNUT* 140-00-864

* - SHEAR BOLTS NOT INCLUDED W/ SHIELD ASSEMBLY. - USE ONLY SHEAR BOLTS THAT ARE APPROVED FOR USE W/ SELECTED PTO SHAFT OPTION.

REAR DRIVESHAFT SHIELD2 115-00-051



12 – DECALS

COMPLETE DECAL PACKAGE FOR MODEL 2425 W/ FRONT DOOR DISCHARGE (MODEL 1500 PRIOR TO 2000 SERIES)

D. RODGERS

125-05-01

JUN 27/00

2425 1 of 1PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

DECAL - MAXIMUM OIL LEVELDECAL - MINIMUM OIL LEVEL

DECAL - GREASE 1 PUMP EVERY 8...

DECAL - MODEL 1500 (PRIOR TO 2425)*DECAL - DOOR HEIGHT ARROW

DECAL - DANGER, ROTATING...DECAL - DANGER, KEEP CHILDREN...DECAL - WARNING, OPERATE AT 540...DECAL - DOOR OPENING MEASUREDECAL - "THINK" SAFETYDECAL - SLOW MOVING VEHICLEDECAL - USE ONLY ESSO OR MOBIL...DECAL - MADE IN CANADADECAL - NOT FOR HIGHWAY TRAVEL...

DECAL - PATENT PENDING

SERIAL NUMBER PLATEDECAL - WARNING, ROTATING KNIVES

DECAL - DANGER, TO PREVENT...

PARTS LIST

4

PART DESC.

DECAL - GREASE

1NO.

23

14

9

5678

12

1011

13

DECAL - MODEL 2425

20

17

1516

1819

120-00-083

PART NO.120-00-05120-00-06120-00-07

1QTY

32

1 120-00-28

3 120-00-14

120-00-09120-00-11120-00-12120-00-13

1312

120-00-15120-00-21120-00-22120-00-24

1

11

1

2 120-00-34

120-00-29120-00-31120-00-32120-00-43120-00-02

1

11

22

* - USE MODEL 1500 DECAL FOR MODELS PRIOR TO 2000 SERIES.

COMPLETE DECAL PACKAGE FOR MODEL 2425 W/ CENTER-SIDE DOOR DISCHARGE (MODEL 1500 PRIOR TO 2000 SERIES)

D. RODGERS

125-05-02

JUN 27/00

2425 1 of 1PART/ASSEMBLY NO:

SHEET

DRAWN BY: DATE:

MODEL

TITLE:

DECAL - MAXIMUM OIL LEVELDECAL - MINIMUM OIL LEVEL

DECAL - GREASE 1 PUMP EVERY 8...

DECAL - MODEL 1500 (PRIOR TO 2425)*DECAL - C-SIDE GENERIC

DECAL - DANGER, ROTATING...DECAL - DANGER, KEEP CHILDREN...DECAL - WARNING, OPERATE AT 540...DECAL - "THINK" SAFETYDECAL - SLOW MOVING VEHICLEDECAL - USE ONLY ESSO OR MOBIL...DECAL - MADE IN CANADADECAL - NOT FOR HIGHWAY TRAVEL...

DECAL - PATENT PENDING

SERIAL NUMBER PLATEDECAL - WARNING, ROTATING KNIVES

DECAL - DANGER, TO PREVENT...

PARTS LIST

4

PART DESC.

DECAL - GREASE

1NO.

23

14

9

5678

12

1011

13

DECAL - MODEL 2425

20

17

1516

1819

120-00-083

PART NO.120-00-05120-00-06120-00-07

1QTY

32

1 120-00-28

2 120-00-14

120-00-09120-00-11120-00-12

131

120-00-15120-00-21120-00-22120-00-24

1

11

1

1 120-00-50

120-00-29120-00-31120-00-32120-00-43120-00-02

1

11

11

* - USE MODEL 1500 DECAL FOR MODELS PRIOR TO 2000 SERIES.

DECAL - MODEL 2425 (SMALL) 120-00-531



SERVICE DEPARTMENTFORMS


Dealer:

IRS#:

Customer:

IRS#:For Mixer Model #: Mixer Serial #:

Quantity Part/AssemblyNumber

Description

Carrier Preferred: Carrier Account #: ¨ Prepaid

Level of Service Required: ¨ Next Day ¨ 2nd Day ¨ 3rd Day ¨ Ground

Notes:

Reference: Signed:

SHIP TO:: ¨ Dealer ¨ Customer

Parts Order #: ____________Date: __________________

JAY-LOR Fabricating Inc.RR # 2 Orton, Ontario L0N 1N0 Tel:(519) 787-9353 Fax:(519) 787-7053

WARRANTY REQUEST FORMWRF#:

Date:

Dealer/Customer Name: Tel:

Address: Fax:

City/State/Zip: IRS #:

Machine Model #:

Machine Serial #:

QTY Defective Part Part # (if applicable) Problem

Shipping Details:

Preferred Carrier: Carrier Acc’t #: Level of service Req’d: [ ] Next day [ ]2nd day [ ] 3rd day [ ] Ground ServiceOrdered by: IRS #:

Ship To Address:

Address: City/State/Tel:

Notes:

Signature: Printed Name:

parts book - storage.googleapis.com · 7 conveyor shield mount 2 010-00-16. model 2425 centre-side...

Documents