parametric modelling
DESCRIPTION
Presentation on parametric modelling with few examplesTRANSCRIPT
![Page 1: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/1.jpg)
PARAMETR
IC M
ODELLIN
G
AND AUGMENTE
D REALIT
Y
Ishan kossambe
![Page 2: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/2.jpg)
INTRODUCTION
The first CAD-systems used by aerospace and automotive enterprises from the mid-1960s, were 2D systems – an electronic version of a drawing board.
Soon it became clear that design should be based on 3D product models, whose 2D projections can be generated automatically
However, simply adding a third coordinate to traditional 2D graphics results in modeling only a wireframe, which is not sufficient for calculating mass/volume characteristics of a future product
This led to the evolution of solid modeling
![Page 3: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/3.jpg)
INTRODUCTION
A simple solid model had its own limitations
It could not be easily manipulated or changed for implementing design changes
Hence there was need to device a new method to allow the designer to easily manipulate the model as desired by him without loosing the design intent
Hence came the parametric modeling
![Page 4: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/4.jpg)
WHAT IS PARAMETRIC MODELING?
The term parametric modeling denotes the use of parameters to control the dimensions and shape of CAD models.
Parametric Design - a system that constructs relations among the geometry of different elements. When one element is changed, the geometry of the rest of the elements are changed as well.
![Page 5: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/5.jpg)
PRIMITIVE ELEMENTS:
1. Dimensions can be linear and angular
2.Datums. Different CAD systems provide various types of datums, but typically datum planes and datum coordinate systems are provided. Datum lines and points are also possible. Generally, datums are coordinate systems, or parts of coordinate systems, that are used to control other coordinate systems or geometric entities.
3. Constraints can be geometric or algebraic relationships that the designer wants to impose on the geometry of CAD models.
a) Geometric constraints are parallel, perpendicular, offset, tangent, and alignments.
b) Algebraic constraints are equations that the designer adds to ensure that features sizes meet design requirements. For example, a part cross section may have to be a certain area.
![Page 6: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/6.jpg)
![Page 7: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/7.jpg)
![Page 8: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/8.jpg)
![Page 9: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/9.jpg)
![Page 10: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/10.jpg)
NEED OF PARAMETRIC MODELLING
1.CONCEPT DESIGN- • Convey a visual representation of the idea or concept.
• Create as many design concepts as possible.
• Evaluate the concept that best captures specified criteria and aesthetic requirements.
2. BID AND PROPOSAL PROCESS-• Minimize the time and costs required to create the bid
geometry
• Submit models and geometry to support a proposed customer price
• Accurately convey and communicate proposal requirements and costs
• Improve accuracy of the prop osal to meet budget and schedule commitmentsParametric
![Page 11: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/11.jpg)
3. DIGITAL PROTOTYPING-
• Design, iterate, optimize, validate and visualize products before they are built
• Rapidly create and explore design geometry
• Enable fast changes to legacy and heterogeneous data
4. 2D DESIGN AND CONVERSION TO 3D-
• Support quick 2D concept design and the creation of 2D engineering deliverables
• Accelerate the 2D-to-3D conversion process to evolve 2D drawings into 3D models
![Page 12: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/12.jpg)
5. REUSE LEGACY DATA-
Reuse and maintain legacy 2D & 3D data to support current and future programsParametric
![Page 13: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/13.jpg)
![Page 14: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/14.jpg)
BENIFITS OF PARAMETRIC MODELING
3D modelling software can automatically update related parts of the model when design changes are made and there is full bi-directional associativity between parts, assemblies and drawings.
It captures and stores the design intent of the designer so that any changes in the geometry will not affect the design intent for which the part was designed
3D systems provide easier design revisions
Parametric modellers have a rollback feature that shows the sequence in which the model was created
Adding design intent in the form of constraints between the model elements and saving them in the file together with the model simplifies future editing.
![Page 15: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/15.jpg)
DESIGN INTENT
In parametric modeling, dimensions control the model.
Design intent is how your model will react when dimension values are changed.
![Page 16: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/16.jpg)
DESIGN INTENT
2.50
4.00
1.25
2.50
The drawing shows the intent of the designer that the inclined plane (chamfer) should have a flat area measuring 2.5 inches and that it should start at a point 1.25 inches from the base of the drawing. These parameters are what the designer deemed significant for this model.Remember that the placement of dimensions is very
important because they are being used to drive the shape of the geometry. If the 2.5 in. vertical dimension increases, the 2.5 in. flat across the chamfer will be maintained, but its angle will change.
![Page 17: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/17.jpg)
DESIGN INTENT
In this drawing, what is important to the designer is the vertical location and horizontal dimension of the chamfer, rather than the flat of the chamfer.
2.50
4.00
1.25
2.125
2.50
4.00
1.75
30.0OIn the last drawing, the designer calls for a specific angle for the chamfer. In this case the angle of the chamfer should be dimensioned.
![Page 18: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/18.jpg)
DESIGN INTENT
![Page 19: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/19.jpg)
PARAMETRIC MODELINGThe true power of parametric modeling shines through when design changes need to be made. The design modification is made by simply changing a dimension.
Since the counterbore is associated with the top surface of the ring, any changes in the thickness of the ring would automatically be reflected on the counterbore depth.
60
10
15
Æ 30Pattern: 8 Holes
![Page 20: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/20.jpg)
SKETCH GEOMETRY
Line Sketch Tool
![Page 21: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/21.jpg)
GEOMETRIC CONSTRAINTS APPLIED FIRST
Geometric Constraint Tools
What do you think we do next?
![Page 22: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/22.jpg)
DIMENSION CONSTRAINTS APPLIED SECOND
Dimension Constraint Tool
![Page 23: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/23.jpg)
PROFILE CHANGED TO ISOMETRIC
Right mouse click, select Home View or use shortcut key F6 or Click on Home icon by View Cube
![Page 24: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/24.jpg)
EXTRUSION PARAMETERS SET
Extrusion Dialogue Box
Select Extrude from Create panel
![Page 25: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/25.jpg)
CREATE NEW SKETCH PLANE
Sketch plane selected with left mouse click
Sketch Button
![Page 26: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/26.jpg)
View Face
SKETCH GEOMETRY
Normal View selected with View Face tool or by clicking on front of View
Cube
![Page 27: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/27.jpg)
CONSTRAIN GEOMETRY
![Page 28: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/28.jpg)
FEATURE PARAMETERS SET
Isometric (Home) view selected, Extrusion dialog box set
Choose cut operation here
![Page 29: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/29.jpg)
FEATURE CREATED
![Page 30: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/30.jpg)
WHY PARAMETRIC MODELING?
Determine the shape and size of the geometry at any time during the design process. This part should
be 5 in. long, not3 in. How can wefix this withoutredrawing it?
![Page 31: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/31.jpg)
AUGMENTED REALITY
![Page 32: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/32.jpg)
VIRTUAL REALITY
To understand what is AUGMENTED REALITY first we need to see what is Virtual reality?
Virtual reality is using computer technology to create a simulated, three-dimensional world that a user can manipulate and explore while feeling as if he were in that world.
It includes:
Three-dimensional images that appear to be life-sized as seen by the user.
The ability to track a user's motions, particularly his head and eye movements, and correspondingly adjust the images on the user's display to reflect the change in perspective
An effective VR experience causes you to become unaware of your real surroundings and focus on your existence inside the virtual environment.DEFINITION : Augmented reality (AR) is a field of computer research which deals with the combination of real-world and computer-generated data.
![Page 33: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/33.jpg)
AUGMENTED REALITY
VR technologies completely immerse a user inside a synthetic environment. While immersed, the user cannot see the real world around him.
In contrast, AR allows the user to see the real world, with virtual objects superimposed upon or composited with the real world.
AR supplements reality, rather than completely replacing it. It creates the illusion that the virtual and real objects coexisted in the same space.
Augmented reality adds graphics, sounds, haptic feedback and even smell to the natural world as if it exists.
![Page 34: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/34.jpg)
WHAT IS REAL AND WHAT IS NOT Real desk with virtual lamp and two virtual
chairs(ECRC)
Is this VR or AR?
![Page 35: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/35.jpg)
WHY AR?
AR enhances a user’s perception of interaction with the real world.
The virtual objects display information that the user cannot directly detect with his own senses.
The information conveyed by the virtual objects helps a user perform real-world tasks.
AR is a specific example of what is known as Intelligence Amplification (IA): using the computer as a tool to make a task easier for a human to perform.
![Page 36: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/36.jpg)
Characteristics: Optical vs. Video
Optical see-through HMD conceptual diagram
Video see-through HMD conceptual diagram
AR can be accomplished using either optical HMD or video HMDHMD:-HEAD MOUNT DISPLAY
![Page 37: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/37.jpg)
Main classes of applications:1. Medical
2. Manufacturing and repair
3. Annotation and visualization
4. Robot path planning
5. Entertainment
6. Military aircraft
APPLICATIONS
![Page 38: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/38.jpg)
TYPICAL APPLICATIONS:-
1.Medical.
The system can be used in pre-operative planning of a laparoscopic surgical procedure in order to find both the right points to introduce the surgical instruments and the best path to reach the organ concerned in the surgical operation.
2.Educational purpose
A very handy tool for instructors and faculty members for subjects involving complex understandings.
APPLICATIONS
![Page 39: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/39.jpg)
Head Up Guidance System (HGS)
(Flight Dynamics Inc.)
Boeing 737 cockpit with Head-up Display (HUD)
(Flight Dynamics Inc.)
APPLICATIONS:AIRCRAFT
![Page 40: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/40.jpg)
Nightvision system in the 2000 Cadillac DeVille(Cadillac.com.)
APPLICATIONS: NIGHT VISION
![Page 41: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/41.jpg)
GOOGLE GLASSES
![Page 42: Parametric modelling](https://reader033.vdocuments.site/reader033/viewer/2022061214/549a2ab3b4795952338b473b/html5/thumbnails/42.jpg)
THANK YOU