parameter reference dictionary - lesman.com€¦ · honeywell process solutions onewireless...

Honeywell Process Solutions

OneWireless

Parameter Reference Dictionary

OWDOC-X260-en-240A

R240

November 2015

Release 240

Honeywell

ii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

Notices and Trademarks

Copyright 2014 by Honeywell International Sárl. Release 240 November 2015

While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customers.

In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change without notice.

Honeywell, PlantScape, Experion PKS, and TotalPlant are registered trademarks of Honeywell International Inc.

Other brand or product names are trademarks of their respective owners.

Honeywell Process Solutions

1860 W. Rose Garden Lane

Phoenix, AZ 85027 USA

1-800 822-7673

R240 OneWireless Parameter Reference Dictionary iii November 2015 Honeywell

About This Document

This document provides information about the parameters associated with OneWireless

devices.

Release Information

Document Name Document ID Release Number

Publication Date

Parameter Reference Dictionary Guide

OWDOC-X260-en-240A

240 November 2015

Document Category

Reference

Support and Other Contacts

iv OneWireless Parameter Reference Dictionary R240 Honeywell November 2015


United States and Canada

Contact: Phone: Fascimile: Mail:

Honeywell Solution Support Center 1-800-822-7673 Calls are answered by dispatcher between 6:00 am and 4:00 pm Mountain Standard Time. Emergency calls outside normal working hours are received by an answering service and returned within one hour. 1-973-455-5000 Honeywell TAC, MS L17 1860 W. Rose Garden Lane Phoenix, AZ, 85027 USA

Europe, Middle East, and Africa (EMEA)

Contact: Phone: Fascimile: Mail: Email:

Honeywell TAC – EMEA +32-2-728-2345 +32-2-728-2696 TAC-BE02 Hermes Plaza Hermeslaan, 1H B-1831 Diegem, Belgium [email protected]

Pacific


Honeywell Global TAC – Pacific 1300-364-822 (toll free within Australia) +61-8-9362-9559 (outside Australia) +61-8-9362-9564 Honeywell Limited Australia 5 Kitchener Way Burswood, WA, 6100, Australia [email protected]

India

Contact: Phone: Fascimile: Mail:

Honeywell Global TAC – India +91-20- 6603-2718/19 1800-233-5051 +91-20- 6603-9800 Honeywell Automation India Ltd 56 and 57, Hadapsar Industrial Estate Hadapsar, Pune –411 013, India


R240 OneWireless Parameter Reference Dictionary v November 2015 Honeywell

Email: [email protected]

Korea


Honeywell Global TAC – Korea +82-80-782-2255 (toll free within Korea) +82-2-792-9015 Honeywell Co., Ltd 4F, Sangam IT Tower B4-4 Block 1590, DMC Sangam-dong, Mapo-gu Seoul, 121-835, Korea [email protected]

People’s Republic of China

Contact: Phone: Mail: Email:

Honeywell Global TAC – China +86- 21-2219-6888 800-820-0237 400-820-0386 Honeywell (China) Co., Ltd 33/F, Tower A, City Center, 100 Zunyi Rd. Shanghai 200051, People’s Republic of China [email protected]

Singapore


Honeywell Global TAC – South East Asia +65-6823-2215 +65-6445-3033 Honeywell Private Limited Honeywell Building 17, Changi Business Park Central 1 Singapore 486073 [email protected]

Japan

Contact: Fascimile: Mail: Email:

Honeywell Global TAC – Japan +81-3-6730-7228 Honeywell K.K New Pier Takeshiba, South Tower Building 20th Floor, 1-16-1 Kaigan, Minato-ku Tokyo 105-0022, Japan [email protected]


vi OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

Elsewhere

Call your nearest Honeywell office.

World Wide Web

Honeywell Process Solutions website:

https://www.honeywellprocess.com/

Training Classes

Honeywell Automation College:

http://www.automationcollege.com

https://www.honeywellprocess.com/

http://www.automationcollege.com/

Symbol Definitions

R240 OneWireless Parameter Reference Dictionary vii November 2015 Honeywell

Symbol Definitions

The following table lists those symbols used in this document to denote certain conditions.

Symbol Definition

ATTENTION: Identifies information that requires special

consideration.

TIP: Identifies advice or hints for the user, often in terms of

performing a task.

REFERENCE -EXTERNAL: Identifies an additional source of

information outside of the bookset.

REFERENCE - INTERNAL: Identifies an additional source of

information within the bookset.

CAUTION

Indicates a situation which, if not avoided, may result in equipment or work (data) on the system being damaged or lost, or may result in the inability to properly operate the process.

CAUTION: Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

CAUTION symbol on the equipment refers the user to the product

manual for additional information. The symbol appears next to required information in the manual.

WARNING: Indicates a potentially hazardous situation, which, if not

avoided, could result in serious injury or death.

WARNING symbol on the equipment refers the user to the product

manual for additional information. The symbol appears next to required information in the manual.

Symbol Definitions

viii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

Symbol Definition

WARNING, Risk of electrical shock: Potential shock hazard where

HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or 60 VDC may be accessible.

ESD HAZARD: Danger of an electro-static discharge to which

equipment may be sensitive. Observe precautions for handling electrostatic sensitive devices.

Protective Earth (PE) terminal: Provided for connection of the

protective earth (green or green/yellow) supply system conductor.

Functional earth terminal: Used for non-safety purposes such as

noise immunity improvement. NOTE: This connection shall be bonded to Protective Earth at the source of supply in accordance with national local electrical code requirements.

Earth Ground: Functional earth connection. NOTE: This

connection shall be bonded to Protective Earth at the source of supply in accordance with national and local electrical code requirements.

Chassis Ground: Identifies a connection to the chassis or frame of

the equipment shall be bonded to Protective Earth at the source of supply in accordance with national and local electrical code requirements.

R240 OneWireless Parameter Reference Dictionary ix November 2015 Honeywell

Contents

1. INTRODUCTION .......................................................................... 35

1.1 Overview ........................................................................................................ 35 Abstract ................................................................................................................................ 35 Parameter definition format .................................................................................................. 35 Parameter attributes defined ................................................................................................ 36 Supported data types ........................................................................................................... 37

2. AXXXX PARAMETERS ................................................................ 39

2.1 AIO_INTERFACE_OBJECT_BLK_7_0.CIU_ADD ........................................ 39

2.2 AIO_INTERFACE_OBJECT_BLK_7_0.CIU_ADD_EMULATION ................ 39

2.3 AIO_INTERFACE_OBJECT_BLK_7_0.FLEXCONN_INSTRUMENT_ADD. 40

2.4 AIO_INTERFACE_OBJECT_BLK_7_0.GPU_INSTRUMENT_ADD ............. 40

2.5 AIO_PRODUCT_LEVEL_BLK_99_1.MODE ................................................. 40

2.6 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.ACTUAL ................................. 41

2.7 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.NORMAL ................................ 41

2.8 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.PERMITTED ........................... 42

2.9 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.TARGET ................................. 42

2.10 AIO_PRODUCT_LEVEL_BLK_99_1.PV ................................................... 43

2.11 AIO_PRODUCT_LEVEL_BLK_99_1.PV.STATUS .................................... 43

2.12 AIO_PRODUCT_LEVEL_BLK_99_1.PV.VALUE ...................................... 44

2.13 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL .............................. 44

2.14 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.DECIMAL ............. 45

2.15 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.EU_0 .................... 45

2.16 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.EU_100 ................ 46

2.17 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.UNITS_INDEX_LEVEL ..................................................................................................................... 46

Contents

x OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

2.18 AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL ............................ 47

2.19 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.DECIMAL47

2.20 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.EU_0 .... 48

2.21 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.EU_100 48

2.22 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.UNITS_INDEX ..................................................................................................................... 49

2.23 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL .............. 49

2.24 AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL.STATUS ............. 50

2.25 AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL.VALUE ............... 50

2.26 AIO_PRODUCT_TEMP_BLK_99_2.MODE................................................ 51

2.27 AIO_PRODUCT_TEMP_BLK_99_2.MODE.ACTUAL ................................ 51

2.28 AIO_PRODUCT_TEMP_BLK_99_2.MODE.NORMAL ............................... 52

2.29 AIO_PRODUCT_TEMP_BLK_99_2.MODE.PERMITTED .......................... 52

2.30 AIO_PRODUCT_TEMP_BLK_99_2.MODE.TARGET ................................ 53

2.31 AIO_PRODUCT_TEMP_BLK_99_2.PV ...................................................... 53

2.32 AIO_PRODUCT_TEMP_BLK_99_2.PV.STATUS ...................................... 54

2.33 AIO_PRODUCT_TEMP_BLK_99_2.PV.VALUE ........................................ 54

2.34 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP .................................. 55

2.35 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.DECIMAL................. 55

2.36 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.EU_0 ........................ 56

2.37 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.EU_100 .................... 56

2.38 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.UNITS_INDEX_TEMP56

2.39 ALERTS ....................................................................................................... 57

2.40 ATOMIC_MASS (Atomic Mass) ................................................................. 58

3. BXXXX PARAMETERS ............................................................... 61

3.1 B ...................................................................................................................... 61

3.2 B.STATUS (Status) ........................................................................................ 61

3.3 B.VALUE (Value) ............................................................................................ 62

Contents

R240 OneWireless Parameter Reference Dictionary xi November 2015 Honeywell

3.4 BATTERY_PERCENT (Percent Remaining) ................................................ 62

3.5 BATTERY_YEARS_LEFT (Years Remaining) ............................................. 63

3.6 BREAK_DETECT (Break Detect) .................................................................. 63

4. CXXXX PARAMETERS ................................................................ 65

4.1 CAL_CMD (Cal Cmd) ..................................................................................... 65

4.2 CAL_POINT_HI (Cal Point High) .................................................................. 66

4.3 CAL_POINT_LO (Cal Point Low) .................................................................. 67

4.4 CAL_SOURCE (Cal Source) ......................................................................... 67

4.5 CAL_STATUS (Cal Status) ........................................................................... 68

4.6 CAL_UNIT (Cal Units) ................................................................................... 69

4.7 CDA.CDALICENSED ..................................................................................... 73

4.8 CDACOMMAND (WDM Command) .............................................................. 74

4.9 CDADISPCONN (Display Connections) ...................................................... 74

4.10 CDADISPCOUNT ........................................................................................ 75

4.11 CDADISPIMRCOUNT ................................................................................. 75

4.12 CDADISPIMRRATE .................................................................................... 76

4.13 CDADISPIMRRATEMAX ............................................................................ 76

4.14 CDADISPRATE (Request Rate) ................................................................ 77

4.15 CDADISPRATEMAX (Request Rate Max) ................................................ 77

4.16 CDAEEC ...................................................................................................... 78

4.17 CDALICENSED ........................................................................................... 78

4.18 CDALOADED .............................................................................................. 78

4.19 CDANOTIFCOUNT ..................................................................................... 79

4.20 CDANOTIFRATE (Notification Rate) ........................................................ 79

4.21 CDANOTIFRATEMAX (Notification Rate Max) ........................................ 80

4.22 CDANUMACEINCON (ACE) ...................................................................... 80

4.23 CDANUMACEOUTCON (ACE) .................................................................. 81

4.24 CDANUMC3INCON (C300) ........................................................................ 81

Contents

xii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

4.25 CDANUMC3OUTCON (C300) ..................................................................... 81

4.26 CDANUMCPMINCON (C200/C200E) ......................................................... 82

4.27 CDANUMCPMOUTCON (C200/C200E) ..................................................... 82

4.28 CDANUMPMDINCON .................................................................................. 83

4.29 CDANUMPMDOUTCON.............................................................................. 83

4.30 CDANUMSIMCPMINCON (SIM-C200/SIM-C200E) .................................... 84

4.31 CDANUMSIMCPMOUTCON ....................................................................... 84

4.32 CDAPEERCONN (Peer Connections) ....................................................... 84

4.33 CDAPEERCOUNT ....................................................................................... 85

4.34 CDAPEERIMRCOUNT ................................................................................ 85

4.35 CDAPEERIMRRATE ................................................................................... 86

4.36 CDAPEERIMRRATEMAX ........................................................................... 86

4.37 CDAPEERRATE (Request Rate) ............................................................... 87

4.38 CDAPEERRATEMAX (Request Rate Max) ............................................... 87

4.39 CDARESETSTATS ...................................................................................... 87

4.40 CDASTATE (WDM State) ........................................................................... 88

4.41 CDATOTALCOUNT ..................................................................................... 88

4.42 CDATOTALIMRCOUNT .............................................................................. 89

4.43 CDATOTALIMRRATE ................................................................................. 89

4.44 CDATOTALIMRRATEMAX ......................................................................... 90

4.45 CDATOTALRATE (Request Rate) ............................................................. 90

4.46 CDATOTALRATEMAX (Request Rate Max) ............................................. 91

4.47 CHANNEL_BIO_97_1.MODE ..................................................................... 91

4.48 CHANNEL_BIO_97_1.MODE.ACTUAL ..................................................... 92

4.49 CHANNEL_BIO_97_1.MODE.NORMAL .................................................... 92

4.50 CHANNEL_BIO_97_1.MODE.PERMITTED ............................................... 93

4.51 CHANNEL_BIO_97_1.MODE.TARGET ..................................................... 93

4.52 CHANNEL_BIO_97_1.PV_B ....................................................................... 94

4.53 CHANNEL_BIO_97_1.PV_B.STATUS ....................................................... 94

Contents

R240 OneWireless Parameter Reference Dictionary xiii November 2015 Honeywell

4.54 CHANNEL_BIO_97_1.PV_B.VALUE ......................................................... 94

4.55 CHANNEL_BO_96_1.FSTATE_TIME ........................................................ 95

4.56 CHANNEL_BO_96_1.FSTATE_VAL_B ..................................................... 95

4.57 CHANNEL_BO_96_1.IO_OPTS ................................................................. 96

4.58 CHANNEL_BO_96_1.MODE ...................................................................... 96

4.59 CHANNEL_BO_96_1.MODE.ACTUAL ...................................................... 97

4.60 CHANNEL_BO_96_1.MODE.NORMAL ..................................................... 97

4.61 CHANNEL_BO_96_1.MODE.PERMITTED ................................................ 98

4.62 CHANNEL_BO_96_1.MODE.TARGET ...................................................... 98

4.63 CHANNEL_BO_96_1.OP_B ....................................................................... 99

4.64 CHANNEL_BO_96_1.OP_B.STATUS ....................................................... 99

4.65 CHANNEL_BO_96_1.OP_B.VALUE ....................................................... 100

4.66 CHANNEL_BO_96_1.READBACK_B ..................................................... 100

4.67 CHANNEL_BO_96_1.READBACK_B.STATUS ...................................... 101

4.68 CHANNEL_BO_96_1.READBACK_B.VALUE ........................................ 101

4.69 CHANNEL_SELECTION (ISA100 Configurable Channels) .................. 102

4.70 CJ_TEMPERATURE ................................................................................. 103

4.71 CJ_TEMPERATURE.STATUS (Status) ................................................... 103

4.72 CJ_TEMPERATURE.VALUE (Value) ...................................................... 104

4.73 CMI ............................................................................................................ 104

4.74 CMI.STATUS (Status) .............................................................................. 105

4.75 CMI.VALUE (Value) .................................................................................. 105

4.76 COMMREDUNALARMEN (Comm Redun Alarm) .................................. 106

4.77 COMMREDUNRATIO (Comm Redun Ratio) .......................................... 106

4.78 COMMREDUNSTATE (Comm Redun State) .......................................... 107

4.79 COUNTRY_CODE (Country Code) ......................................................... 108

4.80 CPUFREE (CPU Free) .............................................................................. 108

4.81 CPUFREEMIN (CPU Free Min) ................................................................ 109

4.82 CTS_VERSION (CTS Version) ................................................................ 109

Contents

xiv OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

4.83 Current_AIO_99_2.CAL_CMD ................................................................. 109

4.84 Current_AIO_99_2.CAL_POINT_HI ......................................................... 110

4.85 Current_AIO_99_2.CAL_POINT_LO ....................................................... 110

4.86 Current_AIO_99_2.CAL_SOURCE .......................................................... 111

4.87 Current_AIO_99_2.CAL_STATUS ........................................................... 111

4.88 Current_AIO_99_2.CAL_UNIT ................................................................. 112

4.89 Current_AIO_99_2.FILTER_COEFFICIENT ............................................ 114

4.90 Current_AIO_99_2.MODE ........................................................................ 114

4.91 Current_AIO_99_2.MODE.ACTUAL ........................................................ 114

4.92 Current_AIO_99_2.MODE.NORMAL ....................................................... 115

4.93 Current_AIO_99_2.MODE.PERMITTED .................................................. 115

4.94 Current_AIO_99_2.MODE.TARGET ........................................................ 116

4.95 Current_AIO_99_2.PV .............................................................................. 116

4.96 Current_AIO_99_2.PV.STATUS .............................................................. 117

4.97 Current_AIO_99_2.PV.VALUE ................................................................. 117

4.98 Current_AIO_99_2.SCALE ...................................................................... 118

4.99 Current_AIO_99_2.SCALE.DECIMAL ..................................................... 118

4.100 Current_AIO_99_2.SCALE.EU_0 ............................................................ 119

4.101 Current_AIO_99_2.SCALE.EU_100 ........................................................ 119

4.102 Current_AIO_99_2.SCALE.UNITS_INDEX.............................................. 120

4.103 Current_AIO_99_2.SENSOR_TYPE ........................................................ 121

4.104 CURTIME (Current Time) ......................................................................... 121

5. DXXXX PARAMETERS ............................................................. 123

5.1 DATE_CODE ................................................................................................. 123

5.2 DENSITY (Density) ....................................................................................... 123

5.3 DESC (Description) ...................................................................................... 123

5.4 DESCR .......................................................................................................... 124

5.5 DETAIL_STATUS ......................................................................................... 124

Contents

R240 OneWireless Parameter Reference Dictionary xv November 2015 Honeywell

5.6 DEV_REV ...................................................................................................... 125

5.7 DEV_STATUS ............................................................................................... 125

5.8 DEVICE_ROLE_ASSIGNED (Assigned Role) ........................................... 126

5.9 DEVICE_ROLE_CAPABILITY (Role Capability) ........................................ 127

5.10 Device Profile Parameters ...................................................................... 128

5.11 Device Vendor Parameters ..................................................................... 130

5.12 DISTR_CODE............................................................................................ 140

5.13 DIV_CORRECT_PKT_COUNT ................................................................. 140

5.14 DIV_CORRECTION_GAIN (Correction Gain) ......................................... 140

5.15 DIV_DIVERSITY_OPERATION (Diversity Operation) ........................... 141

5.16 DIV_ERR_PKT_COUNT ........................................................................... 142

5.17 DIV_ERROR_DIST_COUNT ..................................................................... 142

5.18 DIV_RADIO1_RX_DPDU .......................................................................... 142

5.19 DIV_RADIO2_RX_DPDU .......................................................................... 143

5.20 DIV_REDUNDANCY_GAIN (Redundancy Gain) .................................... 143

5.21 DIV_RESETSTATS ................................................................................... 144

5.22 DIV_TOTAL_RX_DPDU ........................................................................... 144

5.23 DL_ALIAS_16_BIT ................................................................................... 145

5.24 DLMO_CHANNEL_DIAG ......................................................................... 145

5.25 DLMO_CHANNEL_DIAG.BACKOFF ....................................................... 145

5.26 DLMO_CHANNEL_DIAG.CHANNEL ....................................................... 146

5.27 DLMO_CHANNEL_DIAG.NO_ACK ......................................................... 146

5.28 DLMO_NEIGHBOR_DIAG ........................................................................ 147

5.29 DLMO_NEIGHBOR_DIAG.CLOCK_SIGMA ............................................ 147

5.30 DLMO_NEIGHBOR_DIAG.CONN_TYPE ................................................ 148

5.31 DLMO_NEIGHBOR_DIAG.NEIGHBOR ................................................... 148

5.32 DLMO_NEIGHBOR_DIAG.RSQI .............................................................. 149

5.33 DLMO_NEIGHBOR_DIAG.RSSI .............................................................. 149

5.34 DLMO_NEIGHBOR_DIAG.RX_DPDU ..................................................... 150

Contents

xvi OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

5.35 DLMO_NEIGHBOR_DIAG.TX_BACKOFF ............................................... 150

5.36 DLMO_NEIGHBOR_DIAG.TX_FAILED ................................................... 151

5.37 DLMO_NEIGHBOR_DIAG.TX_NACK ...................................................... 151

5.38 DLMO_NEIGHBOR_DIAG.TX_SUCCESS ............................................... 152

5.39 DLMO_RADIO_TRANSMIT_POWER (Transmit Power Level) .............. 153

5.40 DROP_OFF_COUNT (Device Drop Off Count)....................................... 153

6. EXXXX PARAMETERS ............................................................. 155

6.1 ELECTRODE_AREA (Electrode Area) ....................................................... 155

6.2 ENRAF.ENRAFLICENSED ........................................................................... 155

6.3 ENRAFFLEXCONNINSTADDR .................................................................... 156

6.4 ENRAFGPUCIUADDR .................................................................................. 156

6.5 ENRAFGPUCIUADDREMU .......................................................................... 156

6.6 ENRAFGPUINSTADDR ................................................................................ 157

6.7 ENRAFGPURECORDPUB ........................................................................... 157

6.8 ENRAFINTERFACEENABLE (Interface) .................................................... 158

6.9 ENRAFLICENSED ........................................................................................ 158

6.10 ENRAFRESETSTATS ............................................................................... 159

6.11 ENRAFSERIALBAUDRATE (Baud Rate) ................................................ 159

6.12 ENRAFSERIALMSGCOUNT .................................................................... 160

6.13 ENRAFSERIALMSGRATE (Message Rate) ............................................ 160

6.14 ENRAFSERIALMSGRATEMAX (Message Rate Max) ............................ 161

6.15 ENRAFSERIALPARITY (Parity) ............................................................... 161

6.16 ENRAFSERIALPORT (Serial Port) .......................................................... 162

6.17 ENRAFTAGNAME ..................................................................................... 162

6.18 ENRAFUDPMSGCOUNT .......................................................................... 163

6.19 ENRAFUDPMSGRATE (Message Rate) .................................................. 163

6.20 ENRAFUDPMSGRATEMAX (Message Rate Max) ................................. 164

6.21 ENRAFUDPPORT (UDP Port) .................................................................. 164

Contents

R240 OneWireless Parameter Reference Dictionary xvii November 2015 Honeywell

6.22 EUI_64 (EUI64) ......................................................................................... 165

6.23 EXECREQCNT (Request) ........................................................................ 165

6.24 EXECRESCNT (Response) ..................................................................... 165

6.25 EXECTMOCNT (Timeout) ........................................................................ 166

7. FXXXX PARAMETERS .............................................................. 167

7.1 FAILURE_STATUS_ALERT ........................................................................ 167

7.2 FAILURE_STATUS_ALERT.ALERT_DISABLE (Alert Disable) ................ 167

7.3 FAILURE_STATUS_ALERT.ALERT_PRIORITY (Alert Priority) ............... 168

7.4 FDAP_DIAGNOSTICS (Diagnostics).......................................................... 168

7.5 FILTER_COEFFICIENT (Filter Coefficient) ................................................ 169

7.6 FIXED_B_VALUE (Fixed B Value) .............................................................. 169

7.7 FIXED_CHANNELS (ISA100 Fixed Channels) .......................................... 169

7.8 FSTATE_TIME (Fault State Time) .............................................................. 170

7.9 FSTATE_VAL_B (Fault state Value) .......................................................... 170

7.10 FUNCTION_CHECK_ALERT ................................................................... 171

7.11 FUNCTION_CHECK_ALERT.ALERT_DISABLE (Alert Disable) ........... 171

7.12 FUNCTION_CHECK_ALERT.ALERT_PRIORITY (Alert Priority) .......... 172

8. GXXXX PARAMETERS ............................................................. 173

8.1 GCI.GILICENSED ......................................................................................... 173

8.2 GCIALERTCOUNT ....................................................................................... 173

8.3 GCIALERTRATE (Alert Rate) ...................................................................... 174

8.4 GCIALERTRATEMAX (Alert Rate Max) ..................................................... 174

8.5 GCICLIENTCOUNT (Connected Clients) ................................................... 174

8.6 GCICONNCLIENT ........................................................................................ 175

8.7 GCICONNSESSION ..................................................................................... 175

8.8 GCIINTERFACEENABLE (Interface) .......................................................... 176

8.9 GCILEASECOUNT (Number of Leases) .................................................... 176

Contents

xviii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

8.10 GCILICENSED ........................................................................................... 177

8.11 GCIPUBLISHCOUNT ................................................................................ 177

8.12 GCIPUBLISHRATE (Publication Rate) ................................................... 178

8.13 GCIPUBLISHRATEMAX (Publication Rate Max) ................................... 178

8.14 GCIREQCOUNT ........................................................................................ 178

8.15 GCIREQRATE (Request Rate) ................................................................. 179

8.16 GCIREQRATEMAX (Request Rate Max) ................................................. 179

8.17 GCIRESETSTATS ..................................................................................... 180

8.18 GCISESSIONCOUNT (Number of Sessions).......................................... 180

8.19 GCITCPPORT (TCP Port) ......................................................................... 181

9. HXXXX PARAMETERS ............................................................. 183

9.1 HART_REV.................................................................................................... 183

9.2 HART.HARTLICENSED ................................................................................ 183

9.3 HARTDEVTYPE ............................................................................................ 184

9.4 HARTINTERFACEENABLE (Interface) ....................................................... 184

9.5 HARTLICENSED ........................................................................................... 185

9.6 HARTLOOPIDX ............................................................................................. 185

9.7 HARTLOOPIDXADDR .................................................................................. 185

9.8 HARTLOOPIDXNAME .................................................................................. 186

9.9 HARTLOOPIDXSTATUS .............................................................................. 186

9.10 HARTMANID ............................................................................................. 187

9.11 HARTMODEL ............................................................................................ 188

9.12 HARTPOLLINGADDR (Serial Polling Address) ..................................... 188

9.13 HARTRESETSTATS ................................................................................. 188

9.14 HARTSERIALBAUDRATE (Baud Rate) .................................................. 189

9.15 HARTSERIALMSGCOUNT ....................................................................... 190

9.16 HARTSERIALMSGRATE (Message Rate) .............................................. 190

9.17 HARTSERIALMSGRATEMAX (Message Rate Max) .............................. 190

Contents

R240 OneWireless Parameter Reference Dictionary xix November 2015 Honeywell

9.18 HARTSERIALPARITY (Parity) ................................................................. 191

9.19 HARTSERIALPORT (Serial Port) ............................................................ 191

9.20 HARTTCPMSGCOUNT ............................................................................ 192

9.21 HARTTCPMSGRATE (Message Rate) .................................................... 192

9.22 HARTTCPMSGRATEMAX (Message Rate Max) .................................... 193

9.23 HARTTCPPOLLINGADDR (HART/IP Polling Address)......................... 193

9.24 HARTTCPPORT (TCP Port) ..................................................................... 194

9.25 HARTUDPMSGCOUNT ............................................................................ 194

9.26 HARTUDPMSGRATE (Message Rate) ................................................... 195

9.27 HARTUDPMSGRATEMAX (Message Rate Max) ................................... 195

9.28 HARTUDPPORT (UDP Port) .................................................................... 195

9.29 HARTVENDOR ......................................................................................... 196

9.30 HLAI_AIO_BLK_99_0.CAL_CMD ............................................................ 196

9.31 HLAI_AIO_BLK_99_0.CAL_POINT_HI ................................................... 197

9.32 HLAI_AIO_BLK_99_0.CAL_POINT_LO .................................................. 197

9.33 HLAI_AIO_BLK_99_0.CAL_SOURCE .................................................... 198

9.34 HLAI_AIO_BLK_99_0.CAL_STATUS ..................................................... 198

9.35 HLAI_AIO_BLK_99_0.CAL_UNIT ........................................................... 199

9.36 HLAI_AIO_BLK_99_0.FILTER_COEFFICIENT ....................................... 200

9.37 HLAI_AIO_BLK_99_0.MODE................................................................... 201

9.38 HLAI_AIO_BLK_99_0.MODE.ACTUAL ................................................... 201

9.39 HLAI_AIO_BLK_99_0.MODE.NORMAL .................................................. 202

9.40 HLAI_AIO_BLK_99_0.MODE.PERMITTED ............................................. 202

9.41 HLAI_AIO_BLK_99_0.MODE.TARGET ................................................... 203

9.42 HLAI_AIO_BLK_99_0.PV ......................................................................... 203

9.43 HLAI_AIO_BLK_99_0.PV.STATUS ......................................................... 204

9.44 HLAI_AIO_BLK_99_0.PV.VALUE ........................................................... 204

9.45 HLAI_AIO_BLK_99_0.SCALE ................................................................. 205

9.46 HLAI_AIO_BLK_99_0.SCALE.DECIMAL ................................................ 205

Contents

xx OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

9.47 HLAI_AIO_BLK_99_0.SCALE.EU_0 ........................................................ 206

9.48 HLAI_AIO_BLK_99_0.SCALE.EU_100 .................................................... 206

9.49 HLAI_AIO_BLK_99_0.SCALE.UNITS_INDEX ......................................... 206

9.50 HLAI_AIO_BLK_99_0.SENSOR_TYPE ................................................... 208

9.51 HW_REV .................................................................................................... 208

10. IXXXX PARAMETERS............................................................... 211

10.1 IDENT_NUMBER (Device Identity) .......................................................... 211

10.2 IO_OPTS (Invert Output).......................................................................... 211

10.3 ISARXCOUNT (Receive Count) ............................................................... 212

10.4 ISARXRATE (Receive Rate) .................................................................... 212

10.5 ISARXRATEMAX (Receive Rate Max) .................................................... 213

10.6 ISATOCOUNT (Timeout Count) .............................................................. 213

10.7 ISATORATE (Timeout Rate) .................................................................... 214

10.8 ISATORATEMAX (Timeout Rate Max) .................................................... 214

10.9 ISATXCOUNT (Transmit Count) .............................................................. 215

10.10 ISATXRATE (Transmit Rate) ................................................................... 215

10.11 ISATXRATEMAX (Transmit Rate Max) ................................................... 216

10.12 ITS_VERSION (ITS Version) .................................................................... 216

11. JXXXX PARAMETERS ............................................................. 217

11.1 JOIN_ASSIGNMENT (Join Assignment) ................................................ 217

11.2 JOIN_ATTEMPT_COUNT ......................................................................... 217

11.3 JOIN_COMMAND (Join Command) ........................................................ 218

11.4 JOIN_POLICY (Default Join Policy) ........................................................ 218

11.5 JOIN_STATUS (Join Status) ................................................................... 219

12. KXXXX PARAMETERS ............................................................. 221

12.1 KEY_ROT_PERIOD (Key Rotation Period) ............................................ 221

Contents

R240 OneWireless Parameter Reference Dictionary xxi November 2015 Honeywell

13. LXXXX PARAMETERS .............................................................. 223

13.1 LAST_RESET_REASON .......................................................................... 223

13.2 LIC_ACTIVATE ......................................................................................... 225

13.3 LIC_AUTHO_NO_NEW ............................................................................ 226

13.4 LIC_DISP_ORDER ................................................................................... 226

13.5 LIC_EXISTS .............................................................................................. 226

13.6 LIC_EXISTS_NEW .................................................................................... 227

13.7 LIC_RELEASE .......................................................................................... 227

13.8 LIC_RELEASE_NEW ............................................................................... 228

13.9 LIC_ SYSTEM_NO_NEW ......................................................................... 228

13.10 LIC_ VALID_RELEASE ............................................................................ 228

13.11 LIC_ VALID_RELEASE_NEW .................................................................. 229

13.12 LIC_VALUE ............................................................................................... 229

13.13 LIC_VALUE_NEW .................................................................................... 230

13.14 LIC_VALUE_TYPE ................................................................................... 230

13.15 LICENSED_AP_COUNT ........................................................................... 231

13.16 LICENSE_STATE ..................................................................................... 231

13.17 LINE_FILTER (Line Filter) ....................................................................... 232

13.18 LINK_STRENGTH_THRES ...................................................................... 232

13.19 LINK_QUAL_THRES (Link Quality Threshold) ..................................... 232

13.20 LONG_TAG ............................................................................................... 233

13.21 LOOP_CURRENT ..................................................................................... 233

14. MXXXX PARAMETERS ............................................................. 237

14.1 MAINTENANCE_ALERT .......................................................................... 237

14.2 MAINTENANCE_ALERT.ALERT_DISABLE (Alert Disable) ................. 237

14.3 MAINTENANCE_ALERT.ALERT_PRIORITY (Alert Priority) ................ 238

14.4 MAX_OVP (Maximum Over Pressure) ................................................... 238

14.5 MAX_ROUTE_DEPTH (Maximum Route Depth) ................................... 238

Contents

xxii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

14.6 MAX_SP (Maximum Static Pressure) ..................................................... 239

14.7 MDBYTEORDER (Byte Order) ................................................................. 239

14.8 MDCOILADDR ........................................................................................... 240

14.9 MDCOILHANDLE ...................................................................................... 240

14.10 MDCOILNAME .......................................................................................... 241

14.11 MDDISCADDR ........................................................................................... 241

14.12 MDDISCHANDLE ...................................................................................... 242

14.13 MDDISCNAME .......................................................................................... 242

14.14 MDEXCEPTIONCOUNT (Exception) ....................................................... 243

14.15 MDFLOATERR (Float Error Response) .................................................. 243

14.16 MDFLOATERRVAL (Float Error Value) .................................................. 244

14.17 MDHOLDADDR ......................................................................................... 244

14.18 MDHOLDHANDLE .................................................................................... 245

14.19 MDHOLDNAME ......................................................................................... 245

14.20 MDINPUTADDR ........................................................................................ 245

14.21 MDINPUTHANDLE .................................................................................... 246

14.22 MDINPUTNAME ........................................................................................ 246

14.23 MDINTERFACEENABLE (Interface) ........................................................ 247

14.24 MDINTERR (Integer Error Response) ..................................................... 247

14.25 MDINTERRVAL (Integer Error Response Value) ................................... 248

14.26 MDLICENSED ........................................................................................... 248

14.27 MDREADCOILCOUNT (Read (FC 1)) ...................................................... 249

14.28 MDREADDISCCOUNT (Read (FC 4)) ...................................................... 249

14.29 MDREADHOLDCOUNT (Read (FC 3)) ..................................................... 250

14.30 MDREADINPUTCOUNT (Read (FC 4)) .................................................... 250

14.31 MDRESETSTATS ...................................................................................... 250

14.32 MDSERIALBAUDRATE (Baud Rate) ....................................................... 252

14.33 MDSERIALCRCERRCOUNT (CRC Error Count) ................................... 252

14.34 MDSERIALCRCERRRATE (CRC Error Rate) ......................................... 253

Contents

R240 OneWireless Parameter Reference Dictionary xxiii November 2015 Honeywell

14.35 MDSERIALCRCERRRATEMAX (CRC Error Rate Max) ........................ 253

14.36 MDSERIALMSGCOUNT ........................................................................... 254

14.37 MDSERIALMSGRATE (Message Rate) .................................................. 254

14.38 MDSERIALMSGRATEMAX (Message Rate Max) .................................. 255

14.39 MDSERIALPARITY (Parity) ..................................................................... 255

14.40 MDSERIALPORT (Serial Port) ................................................................ 256

14.41 MDSERIALUNITID (Serial Address) ....................................................... 256

14.42 MDTCPCONNCLIENT .............................................................................. 256

14.43 MDTCPMSGCOUNT ................................................................................. 257

14.44 MDTCPMSGRATE (Message Rate) ........................................................ 258

14.45 MDTCPMSGRATEMAX (Message Rate Max) ........................................ 258

14.46 MDTCPPORT (TCP Port) ......................................................................... 259

14.47 MDTIMEOUTCOUNT (Timeout)............................................................... 259

14.48 MDUNCONFIGREADERR (Read Response) ......................................... 259

14.49 MDUNCONFIGWRITEERR (Write Response) ........................................ 260

14.50 MDWRITECOILCOUNT (Write (FC 5)) .................................................... 261

14.51 MDWRITEHOLDCOUNT (Write (FC 16)) ................................................. 261

14.52 MDWRITEMULTICOILCOUNT ................................................................. 261

14.53 MEMFREE (Free) ...................................................................................... 262

14.54 MEMTOTAL (Total) .................................................................................. 262

14.55 MODBUS.MDLICENSED .......................................................................... 263

14.56 MODE ........................................................................................................ 263

14.57 MODE.ACTUAL (Actual/Target).............................................................. 264

14.58 MODE.NORMAL (Normal) ....................................................................... 265

14.59 MODE.PERMITTED (Permitted) .............................................................. 266

14.60 MODE.TARGET ........................................................................................ 267

14.61 MODEL (Model) ........................................................................................ 268

14.62 MODEL_ID ................................................................................................ 268

Contents

xxiv OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

15. NXXXX PARAMETERS ............................................................. 271

15.1 NETWORK_ADDRESS_128_BIT ............................................................. 271

15.2 NTP_CLOCK_DRIFT (Time Sync Drift) ................................................... 271

15.3 NTP_DISPERSION (Dispersion) .............................................................. 272

15.4 NTP_FLASH (Flash error status) ............................................................ 272

15.5 NTP_FREQ (Mean frequency offset) ...................................................... 273

15.6 NTP_LEAP_STS (Leap indicator) ........................................................... 273

15.7 NTP_OFFSET (Mean offset) .................................................................... 274

15.8 NTP_PEER_EVENT .................................................................................. 274

15.9 NTP_PEER_SRC (Peer address) ............................................................ 276

15.10 NTP_PEER_STS (Peer association status) ........................................... 276

15.11 NTP_ROOT_DISPERSION (Root Dispersion) ........................................ 277

15.12 NTP_ROUND_TRIP (Round Trip Time) .................................................. 277

15.13 NTP_SELECT_STS (Last event) ............................................................. 278

15.14 NTP_SOURCE (Sync source) .................................................................. 278

15.15 NTP_SYNC_CAPABLE (Time Master Preferred) ................................... 279

15.16 NTP_SYS_EVENT (Last system event) .................................................. 280

15.17 NUM_ELECTRONS (Number of Electrons) ............................................ 281

15.18 NUMACTDEV ............................................................................................ 281

16. OXXXX PARAMETERS ............................................................. 283

16.1 OP_B.......................................................................................................... 283

16.2 OPC.OPCLICENSED ................................................................................ 283

16.3 OPCINTERFACEENABLE (Interface) ..................................................... 284

16.4 OPCLICENSED ......................................................................................... 284

16.5 OPCMSGCOUNT ...................................................................................... 284

16.6 OPCMSGRATE (Message Rate) .............................................................. 285

16.7 OPCMSGRATEMAX (Message Rate Max) .............................................. 285

16.8 OPCRESETSTATS .................................................................................... 286

Contents

R240 OneWireless Parameter Reference Dictionary xxv November 2015 Honeywell

16.9 OPCSUBCOUNT ...................................................................................... 286

16.10 OPCSUBRATE (Subscription Rate) ....................................................... 287

16.11 OPCSUBRATEMAX (Subscription Rate Max) ....................................... 287

16.12 OTA_PROVISION (Over the Air Provisioning) ...................................... 288

16.13 OUT_OF_SPEC_ALERT .......................................................................... 288

16.14 OUT_OF_SPEC_ALERT.ALERT_DISABLE (Alert Disable) .................. 288

16.15 OUT_OF_SPEC_ALERT.ALERT_PRIORITY (Alert Priority) ................. 289

17. PXXXX PARAMETERS .............................................................. 291

17.1 PF .............................................................................................................. 291

17.2 PF.STATUS (Status) ................................................................................ 291

17.3 PF.VALUE (Value) .................................................................................... 292

17.4 PLAT_ALERTS ......................................................................................... 292

17.5 POWER_SOURCE (Power Source) ........................................................ 293

17.6 POWER_SUPPLY_STATUS (Power Supply Status) ............................. 294

17.7 Pressure_AIO_BLK_99_0.CAL_CMD ..................................................... 294

17.8 Pressure_AIO_BLK_99_0.CAL_POINT_HI ............................................ 295

17.9 Pressure_AIO_BLK_99_0.CAL_POINT_LO ........................................... 296

17.10 Pressure_AIO_BLK_99_0.CAL_SOURCE ............................................. 296

17.11 Pressure_AIO_BLK_99_0.CAL_STATUS .............................................. 296

17.12 Pressure_AIO_BLK_99_0.CAL_UNIT .................................................... 297

17.13 Pressure_AIO_BLK_99_0.MAX_OVP ..................................................... 299

17.14 Pressure_AIO_BLK_99_0.MAX_SP ....................................................... 299

17.15 Pressure_AIO_BLK_99_0.MODE ........................................................... 300

17.16 Pressure_AIO_BLK_99_0.MODE.ACTUAL ............................................ 300

17.17 Pressure_AIO_BLK_99_0.MODE.NORMAL ........................................... 301

17.18 Pressure_AIO_BLK_99_0.MODE.PERMITTED...................................... 301

17.19 Pressure_AIO_BLK_99_0.MODE.TARGET ............................................ 302

17.20 Pressure_AIO_BLK_99_0.PV.................................................................. 302

Contents

xxvi OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

17.21 Pressure_AIO_BLK_99_0.PV.STATUS................................................... 303

17.22 Pressure_AIO_BLK_99_0.PV.VALUE ..................................................... 303

17.23 Pressure_AIO_BLK_99_0.SCALE ........................................................... 304

17.24 Pressure_AIO_BLK_99_0.SCALE.DECIMAL ......................................... 304

17.25 Pressure_AIO_BLK_99_0.SCALE.EU_0................................................. 304

17.26 Pressure_AIO_BLK_99_0.SCALE.EU_100 ............................................ 305

17.27 Pressure_AIO_BLK_99_0.SCALE.UNITS_INDEX .................................. 305

17.28 Pressure_AIO_BLK_99_0.SENSOR_RANGE ........................................ 308

17.29 Pressure_AIO_BLK_99_0.SENSOR_RANGE.DECIMAL ....................... 308

17.30 Pressure_AIO_BLK_99_0.SENSOR_RANGE.EU0 ................................ 309

17.31 Pressure_AIO_BLK_99_0.SENSOR_RANGE.EU100 ............................ 309

17.32 Pressure_AIO_BLK_99_0.SENSOR_RANGE.UNITS_INDEX ............... 310

17.33 Pressure_AIO_BLK_99_0.SENSOR_TEMP ........................................... 311

17.34 Pressure_AIO_BLK_99_0.SENSOR_TEMP.TEMP_VAL ....................... 312

17.35 Pressure_AIO_BLK_99_0.SENSOR_TEMP.TEMP_VAL_STAT ............ 312

17.36 Pressure_AIO_BLK_99_0.TEMP_UNIT .................................................. 313

17.37 PROV_DEV_DISABLE .............................................................................. 313

17.38 PROV_DEV_ENABLE ............................................................................... 314

17.39 PROV_DEV_TIME (Time Remaining) ...................................................... 314

17.40 PV ............................................................................................................... 315

17.41 PV_ALARM_SELECT ............................................................................... 315

17.42 PV_B .......................................................................................................... 316

17.43 PV_DAMPING ........................................................................................... 316

17.44 PV_FLAGS ................................................................................................ 316

17.45 PV_LOWER_RANGE ................................................................................ 317

17.46 PV_RANGE_UNITS ................................................................................... 317

17.47 PV_TRANSFER_FUNCTION .................................................................... 318

17.48 PV_UNIT .................................................................................................... 318

17.49 PV_UPPER_RANGE ................................................................................. 319

Contents

R240 OneWireless Parameter Reference Dictionary xxvii November 2015 Honeywell

17.50 PV_VAL ..................................................................................................... 319

18. QXXXX PARAMETERS ............................................................. 321

18.1 QV_UNIT ................................................................................................... 321

18.2 QV_VAL .................................................................................................... 321

19. RXXXX PARAMETERS .............................................................. 323

19.1 RADIO_DIAGNOSTICS (Radio Diagnostics) ......................................... 323

19.2 RDN_ALERTS........................................................................................... 323

19.3 RDNISTIMEMAX (Initial Sync Time Max) ............................................... 325

19.4 RDNRXCOUNT (Rx Count) ...................................................................... 325

19.5 RDNRXRATE (Rx Rate) ........................................................................... 326

19.6 RDNRXRATEMAX (Rx Rate Max) ........................................................... 326

19.7 RDNSOTIMEMAX (Switchover Time Max) ............................................. 327

19.8 RDNTXCOUNT (Tx Count) ...................................................................... 327

19.9 RDNTXRATE (Tx Rate) ............................................................................ 328

19.10 RDNTXRATEMAX (Tx Rate Max) ............................................................ 328

19.11 READBACK_B.......................................................................................... 329

19.12 READREQCNT (Request) ........................................................................ 329

19.13 READRESCNT (Response) ..................................................................... 329

19.14 READTMOCNT (Timeout) ........................................................................ 330

19.15 RESET_ALL_COUNTERS ....................................................................... 330

19.16 RESET_BATTERY_ESTIMATES ............................................................. 331

19.17 RESET_COUNTERS ................................................................................ 332

19.18 RESET_WDM ............................................................................................ 333

19.19 RESETSTATS (Reset Statistics) ............................................................ 333

19.20 RESTART_COUNT (Restart Count) ....................................................... 333

19.21 RESTART_WDM ....................................................................................... 334

19.22 REVISION (Revision) ............................................................................... 334

Contents

xxviii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

19.23 ROUTING_ASSIGNMENT (Routing Assignment) .................................. 335

19.24 ROUTING_POLICY (Default Routing Policy) ......................................... 336

20. SXXXX PARAMETERS ............................................................. 339

20.1 SAMPLE_TIME (Sample Time) ................................................................ 339

20.2 SCALE ....................................................................................................... 339

20.3 SCALE.DECIMAL (Decimal) .................................................................... 340

20.4 SCALE.EU_0 (EU at 0%) .......................................................................... 340

20.5 SCALE.EU_100 (EU at 100%) .................................................................. 341

20.6 SCALE.UNITS_INDEX (Units Index) ....................................................... 341

20.7 SENSOR_BUILD (Software Version) ...................................................... 346

20.8 SENSOR_DEVREV (Device Revision) .................................................... 346

20.9 SENSOR_RANGE ..................................................................................... 347

20.10 SENSOR_RANGE.DECIMAL (Decimal) .................................................. 347

20.11 SENSOR_RANGE.EU0 (EU at 0%) .......................................................... 348

20.12 SENSOR_RANGE.EU100 (EU at 100%) .................................................. 348

20.13 SENSOR_RANGE.UNITS_INDEX (Units Index) ..................................... 349

20.14 SENSOR_RESTART_COUNT .................................................................. 350

20.15 SENSOR_RESTART_REASON ............................................................... 350

20.16 SENSOR_TEMP ........................................................................................ 351

20.17 SENSOR_TEMP.TEMP_VAL (Value) ....................................................... 351

20.18 SENSOR_TEMP.TEMP_VAL_STAT (Status) .......................................... 352

20.19 SENSOR_TYPE (Sensor Type) ............................................................... 352

20.20 SERIAL_NUMBER (Serial Number) ........................................................ 355

20.21 SESSION_LIFETIME ................................................................................. 355

20.22 SOFTWARE_REVISION ........................................................................... 356

20.23 STAT_ALERTACKRECV .......................................................................... 356

20.24 STAT_ALERTACKSEND .......................................................................... 357

20.25 STAT_ALERTACKTIMEOUT .................................................................... 357

Contents

R240 OneWireless Parameter Reference Dictionary xxix November 2015 Honeywell

20.26 STAT_ALERTREPRECV .......................................................................... 357

20.27 STAT_ALERTREPSEND .......................................................................... 358

20.28 STAT_ALERTREPTIMEOUT .................................................................... 358

20.29 STAT_EUI64STR ...................................................................................... 359

20.30 STAT_EXECREQRECV ............................................................................ 359

20.31 STAT_EXECREQSEND (Request) .......................................................... 360

20.32 STAT_EXECREQTIMEOUT (Timeout) .................................................... 360

20.33 STAT_EXECRSPRECV (Response) ....................................................... 361

20.34 STAT_EXECRSPSEND ............................................................................ 361

20.35 STAT_EXECRSPTIMEOUT ...................................................................... 362

20.36 STAT_IP6ADDRSTR ................................................................................ 362

20.37 STAT_MODEL .......................................................................................... 363

20.38 STAT_PUBMISSED (Input Missed) ........................................................ 363

20.39 STAT_PUBRECV (Input) ......................................................................... 364

20.40 STAT_PUBSEND (Output) ...................................................................... 364

20.41 STAT_PUBSTALE (Input Stale) .............................................................. 364

20.42 STAT_PUBTIMEOUT (Output Timeout) ................................................. 365

20.43 STAT_RADIOMODEL ............................................................................... 365

20.44 STAT_RADIOREVISION .......................................................................... 366

20.45 STAT_RADIOVENDOR ............................................................................ 366

20.46 STAT_READREQRECV (Response) ...................................................... 367

20.47 STAT_READREQSEND (Request).......................................................... 367

20.48 STAT_READREQTIMEOUT (Timeout) ................................................... 368

20.49 STAT_READRSPRECV ............................................................................ 368

20.50 STAT_READRSPSEND ............................................................................ 369

20.51 STAT_READRSPTIMEOUT ..................................................................... 369

20.52 STAT_RESETSTATS ............................................................................... 370

20.53 STAT_REVISION ...................................................................................... 370

20.54 STAT_SERIALNUMBER .......................................................................... 371

Contents

xxx OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

20.55 STAT_SHORTADDR ................................................................................. 371

20.56 STAT_VENDOR ........................................................................................ 372

20.57 STAT_WRITEREQRECV .......................................................................... 372

20.58 STAT_WRITEREQSEND (Request) ......................................................... 372

20.59 STAT_WRITEREQTIMEOUT .................................................................... 373

20.60 STAT_WRITERSPRECV (Response) ...................................................... 373

20.61 STAT_WRITERSPSEND ........................................................................... 374

20.62 STAT_WRITERSPTIMEOUT (Timeout) ................................................... 374

20.63 STATUS_ALERT ....................................................................................... 375

20.64 STATUS_ALERT.ALERT_DISABLE ........................................................ 375

20.65 STATUS_ALERT.ALERT_PRIORITY ....................................................... 376

20.66 SUBNET_ID (ISA100 Subnet ID) ............................................................. 376

20.67 SV_UNIT .................................................................................................... 377

20.68 SV_VAL ..................................................................................................... 377

20.69 SW_REV .................................................................................................... 378

20.70 SYSTEM_LOCK ........................................................................................ 378

21. TXXXX PARAMETERS ............................................................. 379

21.1 TAG ............................................................................................................ 379

21.2 TAG_NAME (Tag Name) .......................................................................... 379

21.3 TAI_OFFSET ............................................................................................. 380

21.4 TC_RESISTANCE ..................................................................................... 380

21.5 TC_RESISTANCE.STATUS (Status) ....................................................... 380

21.6 TC_RESISTANCE.VALUE (Value) ........................................................... 381

21.7 TC_WARN_DETECT (Thermocouple Warn Detect) .............................. 381

21.8 TEMP_UNIT (Temperature Units) ........................................................... 382

21.9 Temperature_AIO_99_1.BREAK_DETECT............................................. 382

21.10 Temperature_AIO_99_1.CAL_CMD ........................................................ 383

21.11 Temperature_AIO_99_1.CAL_POINT_HI ................................................ 383

Contents

R240 OneWireless Parameter Reference Dictionary xxxi November 2015 Honeywell

21.12 Temperature_AIO_99_1.CAL_POINT_LO .............................................. 384

21.13 Temperature_AIO_99_1.CAL_SOURCE ................................................ 384

21.14 Temperature_AIO_99_1.CAL_STATUS ................................................. 385

21.15 Temperature_AIO_99_1.CAL_UNIT ....................................................... 386

21.16 Temperature_AIO_99_1.FILTER_COEFFICIENT................................... 386

21.17 Temperature_AIO_99_1.MODE............................................................... 387

21.18 Temperature_AIO_99_1.MODE.ACTUAL ............................................... 387

21.19 Temperature_AIO_99_1.MODE.NORMAL .............................................. 387

21.20 Temperature_AIO_99_1.MODE.PERMITTED ......................................... 388

21.21 Temperature_AIO_99_1.MODE.TARGET ............................................... 388

21.22 Temperature_AIO_99_1.PV..................................................................... 389

21.23 Temperature_AIO_99_1.PV.STATUS ..................................................... 389

21.24 Temperature_AIO_99_1.PV.VALUE ....................................................... 390

21.25 Temperature_AIO_99_1.SCALE ............................................................. 390

21.26 Temperature_AIO_99_1.SCALE.DECIMAL ............................................ 391

21.27 Temperature_AIO_99_1.SCALE.EU_0 ................................................... 391

21.28 Temperature_AIO_99_1.SCALE.EU_100 ............................................... 392

21.29 Temperature_AIO_99_1.SCALE.UNITS_INDEX .................................... 392

21.30 Temperature_AIO_99_1.SENSOR_TYPE ............................................... 393

21.31 Temperature_AIO_99_1.TC_RESISTANCE ........................................... 393

21.32 Temperature_AIO_99_1.TC_RESISTANCE.STATUS ............................ 394

21.33 Temperature_AIO_99_1.TC_RESISTANCE.VALUE .............................. 394

21.34 Temperature_AIO_99_1.TC_WARN_DETECT ....................................... 395

21.35 TemperatureDI_AIO_BLK_99_1.BREAK_DETECT ............................... 395

21.36 TemperatureDI_AIO_BLK_99_1.CAL_CMD ........................................... 396

21.37 TemperatureDI_AIO_BLK_99_1.CAL_POINT_HI .................................. 396

21.38 TemperatureDI_AIO_BLK_99_1.CAL_POINT_LO ................................. 397

21.39 TemperatureDI_AIO_BLK_99_1.CAL_SOURCE ................................... 397

21.40 TemperatureDI_AIO_BLK_99_1.CAL_STATUS .................................... 398

Contents

xxxii OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

21.41 TemperatureDI_AIO_BLK_99_1.CAL_UNIT ........................................... 399

21.42 TemperatureDI_AIO_BLK_99_1.FILTER_COEFFICIENT ...................... 399

21.43 TemperatureDI_AIO_BLK_99_1.MODE .................................................. 400

21.44 TemperatureDI_AIO_BLK_99_1.MODE.ACTUAL .................................. 400

21.45 TemperatureDI_AIO_BLK_99_1.MODE.NORMAL ................................. 400

21.46 TemperatureDI_AIO_BLK_99_1.MODE.PERMITTED ............................ 401

21.47 TemperatureDI_AIO_BLK_99_1.MODE.TARGET .................................. 401

21.48 TemperatureDI_AIO_BLK_99_1.PV ........................................................ 402

21.49 TemperatureDI_AIO_BLK_99_1.PV.STATUS ........................................ 402

21.50 TemperatureDI_AIO_BLK_99_1.PV.VALUE ........................................... 403

21.51 TemperatureDI_AIO_BLK_99_1.SCALE ................................................. 403

21.52 TemperatureDI_AIO_BLK_99_1.SCALE.DECIMAL ............................... 404

21.53 TemperatureDI_AIO_BLK_99_1.SCALE.EU_0 ...................................... 404

21.54 TemperatureDI_AIO_BLK_99_1.SCALE.EU_100 .................................. 405

21.55 TemperatureDI_AIO_BLK_99_1.SCALE.UNITS_INDEX ........................ 405

21.56 TemperatureDI_AIO_BLK_99_1.SENSOR_TYPE .................................. 406

21.57 TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE ............................... 407

21.58 TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE.STATUS ............... 407

21.59 TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE.VALUE ................. 408

21.60 TemperatureDI_AIO_BLK_99_1.TC_WARN_DETECT .......................... 408

21.61 TemperatureDI_BIO_BLK_97_1.MODE .................................................. 409

21.62 TemperatureDI_BIO_BLK_97_1.MODE.ACTUAL .................................. 409

21.63 TemperatureDI_BIO_BLK_97_1.MODE.NORMAL ................................. 410

21.64 TemperatureDI_BIO_BLK_97_1.MODE.PERMITTED ............................ 410

21.65 TemperatureDI_BIO_BLK_97_1.MODE.TARGET .................................. 411

21.66 TemperatureDI_BIO_BLK_97_1.PV_B ................................................... 411

21.67 TemperatureDI_BIO_BLK_97_1.PV_B.STATUS .................................... 412

21.68 TemperatureDI_BIO_BLK_97_1.PV_B.VALUE ...................................... 412

21.69 TOTAL_AP_LICENSES ............................................................................ 412

Contents

R240 OneWireless Parameter Reference Dictionary xxxiii November 2015 Honeywell

21.70 TV_UNIT .................................................................................................... 413

21.71 TV_VAL ..................................................................................................... 413

22. UXXXX PARAMETERS .............................................................. 417

22.1 UAP_OPTION (Enable Software Write Protect) .................................... 417

22.2 UAP_STREV (Static Revision) ................................................................ 417

22.3 UAP_VERREV .......................................................................................... 418

22.4 UAPMO_ALERT ....................................................................................... 418

22.5 UCDNUM ................................................................................................... 419

22.6 UNIQUE_ID ............................................................................................... 419

22.7 UNLICENSED_AP_COUNT ..................................................................... 420

22.8 UPTIME (Uptime) ..................................................................................... 420

22.9 UPTIMEIDLE ............................................................................................. 421

22.10 USE_DYNAMIC_B (Use Dynamic B Value) ........................................... 421

23. VXXXX PARAMETERS .............................................................. 425

23.1 V_POWER (Power Voltage) .................................................................... 425

23.2 VENDOR (Vendor) ................................................................................... 425

23.3 VENDOR_ID .............................................................................................. 426

24. WXXXX PARAMETERS ............................................................. 427

24.1 WRITE_PROTECT .................................................................................... 427

24.2 WRITEREQCNT (Request) ...................................................................... 427

24.3 WRITERESCNT (Response) .................................................................... 428

24.4 WRITETMOCNT (Timeout) ...................................................................... 428

R240 OneWireless Parameter Reference Dictionary 35 November 2015 Honeywell

1. Introduction

1.1 Overview

Abstract

This document defines the user-visible parameters that exist in the OneWireless

Network. Use this document as you deploy the OneWireless Network and during

operation, when detailed information about function block parameters is required.

Parameter definition format

In this dictionary, the parameter definitions are listed in alphabetical order. Refer to the

following figure for an example of the parameter definition format.

Figure 1 Parameter Definition Format

1. Introduction

1.1. Overview

36 OneWireless Parameter Reference Dictionary R240 Honeywell November 2015

Parameter attributes defined

The following table defines the information categories of the parameter definition.

Table 1 Parameter attribute definitions

Attribute Definition

Specific to Block(s) Defines which device the parameter applies to. If a parameter has different properties for different devices, there will be multiple tables for the parameter.

Description Includes a description of the parameter. Additional information describing its basic purpose or function may also be available.

Data Type Defines how the parameter data is viewed in the system. (Refer to Table 2 for additional details.)

Data Size Defines the size of the parameter for the data type.

Range Defines the range of values for the data type (also defines ranges for ViewOnly parameters).

Class Defines a change in the frequency of a parameter.

Access Defines the access permission for the parameter.

Related Parameters

Lists parameters that are related by their use at configurations and operations times.

Remarks Includes additional information that is important to the understanding, use, and operation of the parameter.

1. Introduction

1.1. Overview


Supported data types

Multiple data types are supported in wireless network. Refer to following table for a

listing and description of these data types.

Table 2 Supported Parameter Data Types

BOOLEAN

INT8

INT16

INT32

UINT8

UINT16

UINT32

UINT64

UINT128

FLOAT

DOUBLE

STRING (variable length)

BLOB (variable length)

BITSTRING (variable length)

VALSTS_FLOAT (floating point value, status struct)

VALSTS_DISCRETE (discrete value, status struct)

SCALE (EU0, EU100, units, decimal struct)

MODE

1. Introduction

1.1. Overview



2. Axxxx Parameters

2.1 AIO_INTERFACE_OBJECT_BLK_7_0.CIU_ADD

Specific to Block(s) EnrafFlexLine

Description CIU address.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

2.2 AIO_INTERFACE_OBJECT_BLK_7_0.CIU_ADD_EMULATION


Description CIU emulation setting.

Data Type Uint8

Data Size 1

Range Enabled No Help Available

Disabled No Help Available

Class Static

Access Read Only

Related Parameters

2. Axxxx Parameters

2.3. AIO_INTERFACE_OBJECT_BLK_7_0.FLEXCONN_INSTRUMENT_ADD


2.3 AIO_INTERFACE_OBJECT_BLK_7_0.FLEXCONN_INSTRUMENT_ADD


Description Flexconn address of HCI-1WL.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

2.4 AIO_INTERFACE_OBJECT_BLK_7_0.GPU_INSTRUMENT_ADD


Description GPU address of HCI-1WL.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

2.5 AIO_PRODUCT_LEVEL_BLK_99_1.MODE


2. Axxxx Parameters

2.6. AIO_PRODUCT_LEVEL_BLK_99_1.MODE.ACTUAL


Description Channel mode.

Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.6 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.ACTUAL


Description Channel actual mode.

Data Type Uint8

Data Size 1

Range OOS Out-of-service mode

Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

2.7 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.NORMAL


Description Channel normal mode.

2. Axxxx Parameters

2.8. AIO_PRODUCT_LEVEL_BLK_99_1.MODE.PERMITTED


Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

2.8 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.PERMITTED


Description Channel permitted mode.

Data Type BitString

Data Size 1

Range OOS Out-of-service mode as the permitted mode

Auto Automatic mode as the permitted mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

2.9 AIO_PRODUCT_LEVEL_BLK_99_1.MODE.TARGET


2. Axxxx Parameters

2.10. AIO_PRODUCT_LEVEL_BLK_99_1.PV


Description Channel target mode.

Data Type Uint8

Data Size 1

Range Normal Normal

OOS Out-of-service mode

Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

2.10 AIO_PRODUCT_LEVEL_BLK_99_1.PV


Description Channel process value.

Data Type AnalogValueStatus

Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.11 AIO_PRODUCT_LEVEL_BLK_99_1.PV.STATUS


2. Axxxx Parameters

2.12. AIO_PRODUCT_LEVEL_BLK_99_1.PV.VALUE


Description Channel process value status.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.12 AIO_PRODUCT_LEVEL_BLK_99_1.PV.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.13 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL


Description Channel transducer scale.

Data Type Scaling

Data Size 11

Range

2. Axxxx Parameters

2.14. AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.DECIMAL


Class Static

Access Read/Write

Related Parameters

Remarks

2.14 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.DECIMAL


Description Channel decimal points.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.15 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.EU_0


Description Channel engineering units at 0%.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

2. Axxxx Parameters

2.16. AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.EU_100


Related Parameters

Remarks

2.16 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.17 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_LEVEL.UNITS_INDEX_LEVEL


Description Channel units index.

Data Type Uint16

Data Size 2

Range m meter

mm millimeter

ft feet

in inch

Class Static

2. Axxxx Parameters

2.18. AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL


Access Read/Write

Related Parameters

Remarks

2.18 AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL


Description Either the primary analog value for use is executing the function or a process value is associated with it. It may also be calculated from the READBACK value of an AO block.


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.19 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.DECIMAL


Description The number of digits to the right of the decimal point which should be used by an interface device in displaying the specified parameter.

Data Type Uint8

Data Size 1

Range

Class Static

2. Axxxx Parameters

2.20. AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.EU_0


Access Read/Write

Related Parameters

Remarks

2.20 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.EU_0


Description The engineering unit value which represents the lower end of the range of the associated block parameter.

Data Type Uint16

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.21 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.EU_100


Description The engineering unit value which represents the upper end of the range of the associated block parameter.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

2. Axxxx Parameters

2.22. AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.UNITS_INDEX


Related Parameters

Remarks

2.22 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL.UNITS_INDEX


Description Device description units code index for the engineering unit descriptor for the associated block value.

Data Type Uint16

Data Size 2

Range m meter

mm millimeter

ft feet

in inch

Class Static

Access Read/Write

Related Parameters

Remarks

2.23 AIO_PRODUCT_LEVEL_BLK_99_1.SCALE_ULLAGE_LEVEL


Description The high and low scale values engineering units code and number of digits to the right of the decimal point used with the value obtained from the transducer for a specified channel.

Data Type Scaling

Data Size 11

2. Axxxx Parameters

2.24. AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL.STATUS


Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.24 AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL.STATUS


Description Digital transducers unlike their analog versions can detect faults that make the measurement bad or prevent the actuator from responding. This additional valuable information is passed along with each transmission of a data value in the form of a status attribute.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.25 AIO_PRODUCT_LEVEL_BLK_99_1.ULLAGE_LEVEL.VALUE


Description A numerical quantity entered by a user or calculated by the algorithm.

Data Type Float

2. Axxxx Parameters

2.26. AIO_PRODUCT_TEMP_BLK_99_2.MODE


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.26 AIO_PRODUCT_TEMP_BLK_99_2.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.27 AIO_PRODUCT_TEMP_BLK_99_2.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

2. Axxxx Parameters

2.28. AIO_PRODUCT_TEMP_BLK_99_2.MODE.NORMAL


Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

2.28 AIO_PRODUCT_TEMP_BLK_99_2.MODE.NORMAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

2.29 AIO_PRODUCT_TEMP_BLK_99_2.MODE.PERMITTED



Data Type BitString

Data Size 1



2. Axxxx Parameters

2.30. AIO_PRODUCT_TEMP_BLK_99_2.MODE.TARGET


Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

2.30 AIO_PRODUCT_TEMP_BLK_99_2.MODE.TARGET



Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

2.31 AIO_PRODUCT_TEMP_BLK_99_2.PV




Data Size 5

2. Axxxx Parameters

2.32. AIO_PRODUCT_TEMP_BLK_99_2.PV.STATUS


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.32 AIO_PRODUCT_TEMP_BLK_99_2.PV.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

2.33 AIO_PRODUCT_TEMP_BLK_99_2.PV.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

2. Axxxx Parameters

2.34. AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP


Remarks

2.34 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP



Data Type Scaling

Data Size 11

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.35 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.DECIMAL



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2. Axxxx Parameters

2.36. AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.EU_0


2.36 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.EU_0



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.37 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2.38 AIO_PRODUCT_TEMP_BLK_99_2.SCALE_TEMP.UNITS_INDEX_TEMP

2. Axxxx Parameters

2.39. ALERTS




Data Type Uint16

Data Size 2

Range °C degree Celsius

°F degree Fahrenheit

Class Static

Access Read/Write

Related Parameters

Remarks

2.39 ALERTS

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (TempAI and CurrAI channel), Multi AI DI (CurrAI and TempAI channel), Pressure (AI channel), Temperature DI (TempAI channel)

Description Alerts generated by the field devices and the field device channels.

Data Type Uint8

Data Size 1

Range High

HighHigh

Low

LowLow

OutOfService

Sensor Over Temperature

Default

2. Axxxx Parameters

2.40. ATOMIC_MASS (Atomic Mass)


Class Static

Access Read/Write

Related Parameters

Remarks

2.40 ATOMIC_MASS (Atomic Mass)

Specific to Block(s) Corrosion (AI channel)

Description Electrode material atomic mass constant.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

2. Axxxx Parameters

2.40. ATOMIC_MASS (Atomic Mass)



3. Bxxxx Parameters

3.1 B


Description The Stearn-Geary constant.


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters Fixed B Value & Dynamic B Value

Remarks

3.2 B.STATUS (Status)



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

3. Bxxxx Parameters

3.3. B.VALUE (Value)


3.3 B.VALUE (Value)


Description Indicates a numerical quantity entered by a user or calculated by the algorithm.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters Fixed B Value & Dynamic B Value

Remarks

3.4 BATTERY_PERCENT (Percent Remaining)

Specific to Block(s) HLAI, Temperature DI, EnrafFlexLine, Multi AI DI, Pressure, Multi AI DI DO

Note: This also applies to Corrosion and OWA devices (that is, all devices with Honeywell Radio boards)

Description The estimated battery remaining in percent.

Data Type Uint8

Data Size 1

Range 0-100

Class Dynamic

Access Read Only

Related Parameters BATTERY_YEARS_LEFT and RESET_BATTERY_ESTIMATES

Remarks Only applies to Honeywell Field Devices.

Clamped to zero if the attribute is as follows:

3. Bxxxx Parameters

3.5. BATTERY_YEARS_LEFT (Years Remaining)


1. FD radio firmware is earlier than R220.1.

2. Battery has not yet been replaced since the Field Device is loaded with R220.1 radio firmware.

3.5 BATTERY_YEARS_LEFT (Years Remaining)


Note: This also applies to Corrosion and OWA devices (that is, all devices with Honeywell Radio boards)

Description The estimated battery remaining in years.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters BATTERY_PERCENT and RESET_BATTERY_ESTIMATES

Remarks Only applies to Honeywell Field Devices.

Clamped to zero if the attribute is as follows:

1. FD radio firmware is earlier than R220.1.

2. Battery has not yet been replaced since the Field Device is loaded with R220.1 radio firmware.

3.6 BREAK_DETECT (Break Detect)

Specific to Block(s) Multi AI DI DO (TempAI channel), Multi AI DI (TempAI channel), Temperature DI (TempAI channel)

Description Enables/disables sensor break detection for a particular channel.

Data Type Boolean

3. Bxxxx Parameters

3.6. BREAK_DETECT (Break Detect)


Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks


4. Cxxxx Parameters

4.1 CAL_CMD (Cal Cmd)

Specific to Block(s) HLAI (AI channel), Multi AI DI DO (CurrAI channel), Multi AI DI DO (TempAI channel), Multi AI DI (CurrAI channel), Multi AI DI (TempAI channel), Temperature DI (TempAI channel)

Description Calibration command.

Data Type Uint8

Data Size 1

Range None No value

Cal Lower Calibrate for lower value

Cal Upper Calibrate for upper value

Cal Restore Restore calibration command

Cal Clear Clear calibration command

Class Dynamic

Access Read/Write

Related Parameters

Remarks


Description Calibration command

Data Type Uint8

Data Size 1

Range None None

Cal Lower Lower point calibration

Cal Higher Upper point calibration

4. Cxxxx Parameters

4.2. CAL_POINT_HI (Cal Point High)


Field Calibrate Field calibrate command


Class Dynamic

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Pressure (AI channel)

Description Calibration command

Data Type Uint8

Data Size 1

Range None None

Cal Lower Lower point calibration

Cal Higher Upper point calibration

Cal Zero Zero calibration


Class Dynamic

Access Read/Write

Related Parameters

Remarks

4.2 CAL_POINT_HI (Cal Point High)

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (device, TempAI and CurrAI channels), Multi AI DI (CurrAI and TempAI, Pressure (AI channel), Temperature DI (TempAI channel)

Description Calibration high point.

4. Cxxxx Parameters

4.3. CAL_POINT_LO (Cal Point Low)


Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.3 CAL_POINT_LO (Cal Point Low)

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (device, TempAI and CurrAI channels), Multi AI DI (CurrAI and TempAI channels), Pressure (AI channel), Temperature DI (TempAI channel)

Description Calibration low point.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.4 CAL_SOURCE (Cal Source)

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (device, TempAI and CurrAI channels), Multi AI DI (CurrAI and TempAI channels), Pressure (AI channel), Temperature DI (TempAI channel)

Description Calibration source

4. Cxxxx Parameters

4.5. CAL_STATUS (Cal Status)


Data Type Uint8

Data Size 1

Range None No Calibration source

User User Calibration

Factory Factory Calibration

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.5 CAL_STATUS (Cal Status)

Specific to Block(s) HLAI (AI channel), Multi AI DI DO (CurrAI and TempAI channels), Multi AI DI (CurrAI and TempAI channels), Pressure (AI channel), Temperature DI (TempAI channel)

Description Calibration status

Data Type Uint8

Data Size 1

Range None No value

Success Calibration successful

Failed Calibrate failed

Bad Factory Cal Bad factory calibration

Bad User Cal Bad user calibration

Internal Error Internal error

Bad Units Bad units

Bad Sensor Bad sensor

Bad Trim Point Bad trim point

Success with Excess Success with excess

4. Cxxxx Parameters

4.6. CAL_UNIT (Cal Units)


Class Dynamic

Access Read Only

Related Parameters

Remarks



Data Type Uint8

Data Size 1

Range None No value


Failed Calibration failed





Class Dynamic

Access Read Only

Related Parameters

Remarks

4.6 CAL_UNIT (Cal Units)

Specific to Block(s) HLAI (AI channel), Multi AI DI DO (CurrAI channel), Multi AI DI (CurrAI channel)

Description Units of the calibration point.

Data Type Uint16

4. Cxxxx Parameters



Data Size 2



° degree

rev revolution

L liter

gallon US gallon

RPM revolutions per minute

Pa Pascal

kPa kilopascal

psi pounds per square inch

psia pounds per square inch absolute

psig pounds per square inch gauge

inH2O inches of water

inH2O (4°C) inches of water at 4°C

mmHg millimeters of mercury

mmHg (0°C) millimeters of mercury at 0°C

mA milliampere

V volt

% percent

L/min liter per minute

GPM US gallon per minute

pH pH

ppm parts per million

ppb parts per billion

ppt parts per thousand

4. Cxxxx Parameters



Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Temperature DI (TempAI channel)


Data Type Uint16

Data Size 2



Ohm Ohm

mV millivolt

Class Static

Access Read/Write

Related Parameters

Remarks



Data Type Uint16

Data Size 2

Range °F degree Fahrenheit

MPa megapascal

kPa kilopascal

bar bar

4. Cxxxx Parameters



mbar millibar




g/cm² gram per square centimeter

kg/cm² kilogram per square centimeter


inH2O (68°F) inches of water at 68°F

mmH2O (4°C) millimeters of water at 4°C

mmH2O (68°F) millimeters of water at 68°F

inHg (0°C) inches of mercury at 0°C


% percent

Default

Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Multi AI DI DO (TempAI channel)


Data Type Uint16

Data Size 2



mV millivolt

4. Cxxxx Parameters

4.7. CDA.CDALICENSED


% percent

Default

Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Multi AI DI (TempAI channel)


Data Type Uint16

Data Size 2



mV millivolt

Ohm Ohm

% percent

Class Static

Access Read/Write

Related Parameters

Remarks

4.7 CDA.CDALICENSED

Specific to Block(s)

Description Licensing

Data Type Uint8

Data Size 1

4. Cxxxx Parameters

4.8. CDACOMMAND (WDM Command)


Range Enumeration Values:

0 - Not Licensed (Interface is not licensed and is disabled.)

1 - Licensed (Interface is licensed and may be enabled.)

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.8 CDACOMMAND (WDM Command)

Specific to Block(s) WDM CDA

Description Module command.

Data Type Uint16

Data Size 2

Range 0 – None No command issued.

1 - Clear CDA Database WDM clears the CDA database.

Class Dynamic

Access Read/Write

Related Parameters

Remarks The Clear CDA Database command is used to clear the CDA interface database from a running WDM. You must clear the CDA interface database when moving the WDM from one Experion PKS system to another. If you do not clear the CDA interface database, you may get an "invalid EEC" error when attempting to load the WDM on a different Experion PKS system.

4.9 CDADISPCONN (Display Connections)


4. Cxxxx Parameters

4.10. CDADISPCOUNT


Description Number of CDA display connections.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.10 CDADISPCOUNT


Description Number of CDA display responder requests.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.11 CDADISPIMRCOUNT


Description Number of CDA display responder IMRs.

Data Type Uint32

Data Size 4

4. Cxxxx Parameters

4.12. CDADISPIMRRATE


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.12 CDADISPIMRRATE


Description Number of CDA display responder IMRs per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.13 CDADISPIMRRATEMAX


Description High water mark of CDA displays responder IMRs per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

4. Cxxxx Parameters

4.14. CDADISPRATE (Request Rate)


Related Parameters

Remarks

4.14 CDADISPRATE (Request Rate)


Description Number of CDA display responder requests per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.15 CDADISPRATEMAX (Request Rate Max)


Description Higher water mark of CDA display responder requests per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4. Cxxxx Parameters

4.16. CDAEEC


4.16 CDAEEC


Description EEC assigned by Experion PKS.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.17 CDALICENSED

Specific to Block(s) WDM Block


Data Type Uint8

Data Size 1

Range 0 - Not Licensed (Interface is not licensed and is disabled.)


Class Dynamic

Access Read Only

Related Parameters

Remarks

4.18 CDALOADED


Description Returns true if WDM is loaded to an Experion PKS system.

4. Cxxxx Parameters

4.19. CDANOTIFCOUNT


Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.19 CDANOTIFCOUNT


Description Number of CDA notifications.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.20 CDANOTIFRATE (Notification Rate)


Description Number of CDA notifications per second.

Data Type Float

Data Size 4

Range

4. Cxxxx Parameters

4.21. CDANOTIFRATEMAX (Notification Rate Max)


Class Dynamic

Access Read Only

Related Parameters

Remarks

4.21 CDANOTIFRATEMAX (Notification Rate Max)


Description Higher water mark of CDA notifications per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.22 CDANUMACEINCON (ACE)


Description Incoming connections from ACE nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4. Cxxxx Parameters

4.23. CDANUMACEOUTCON (ACE)


4.23 CDANUMACEOUTCON (ACE)

Specific to Block(s) WDM

Description Outgoing connections to ACE nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.24 CDANUMC3INCON (C300)


Description Incoming connections from C300 nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.25 CDANUMC3OUTCON (C300)


4. Cxxxx Parameters

4.26. CDANUMCPMINCON (C200/C200E)


Description Outgoing connections to C300 nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.26 CDANUMCPMINCON (C200/C200E)


Description Incoming connections from CPM nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.27 CDANUMCPMOUTCON (C200/C200E)


Description Outgoing connections to CPM nodes.

Data Type Int32

Data Size 4

Range

4. Cxxxx Parameters

4.28. CDANUMPMDINCON


Class Dynamic

Access Read Only

Related Parameters

Remarks

4.28 CDANUMPMDINCON


Description Incoming connections from PMD nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.29 CDANUMPMDOUTCON


Description Outgoing connections to PMD nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4. Cxxxx Parameters

4.30. CDANUMSIMCPMINCON (SIM-C200/SIM-C200E)


4.30 CDANUMSIMCPMINCON (SIM-C200/SIM-C200E)


Description Incoming connections from SIM-CPM nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.31 CDANUMSIMCPMOUTCON


Description Outgoing connections to SIM-CPM nodes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.32 CDAPEERCONN (Peer Connections)


Description Number of CDA peer connections.

4. Cxxxx Parameters

4.33. CDAPEERCOUNT


Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.33 CDAPEERCOUNT


Description Number of CDA peer responder requests.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.34 CDAPEERIMRCOUNT


Description Number of CDA peer responder IMRs.

Data Type Uint32

Data Size 4

Range

4. Cxxxx Parameters

4.35. CDAPEERIMRRATE


Class Dynamic

Access Read Only

Related Parameters

Remarks

4.35 CDAPEERIMRRATE


Description Number of CDA peer responder IMRs per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.36 CDAPEERIMRRATEMAX


Description High water mark of CDA peer responder IMRs per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4. Cxxxx Parameters

4.37. CDAPEERRATE (Request Rate)


4.37 CDAPEERRATE (Request Rate)


Description Number of CDA peer responder requests per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.38 CDAPEERRATEMAX (Request Rate Max)


Description Higher water mark of CDA peer responder requests per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.39 CDARESETSTATS


Description Reset CDA interface statistics.

4. Cxxxx Parameters

4.40. CDASTATE (WDM State)


Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

4.40 CDASTATE (WDM State)


Description Module state within Experion PKS system.

Data Type Uint16

Data Size 2

Range 0 - Down WDM is offline.

1 - Not Loaded WDM is not loaded in Experion system.

2 - Idle WDM is loaded in Experion system.

3 - Online WDM is loaded in Experion system.

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.41 CDATOTALCOUNT


Description Number of CDA peer and display responder requests.

4. Cxxxx Parameters

4.42. CDATOTALIMRCOUNT


Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.42 CDATOTALIMRCOUNT


Description Number of CDA peer and display responder IMRs.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.43 CDATOTALIMRRATE


Description Number of CDA peer and display responder IMRs per second.

Data Type Float

Data Size 4

Range

4. Cxxxx Parameters

4.44. CDATOTALIMRRATEMAX


Class Dynamic

Access Read Only

Related Parameters

Remarks

4.44 CDATOTALIMRRATEMAX


Description High water mark of CDA peers and display responder IMRs per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.45 CDATOTALRATE (Request Rate)


Description Number of CDA peer and display responder requests per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

4. Cxxxx Parameters

4.46. CDATOTALRATEMAX (Request Rate Max)


Related Parameters

Remarks

4.46 CDATOTALRATEMAX (Request Rate Max)


Description Higher water mark of CDA peer and display responder requests per second.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.47 CHANNEL_BIO_97_1.MODE

Specific to Block(s) Multi AI DI, Multi AI DI DO


Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4. Cxxxx Parameters

4.48. CHANNEL_BIO_97_1.MODE.ACTUAL


4.48 CHANNEL_BIO_97_1.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

4.49 CHANNEL_BIO_97_1.MODE.NORMAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4. Cxxxx Parameters

4.50. CHANNEL_BIO_97_1.MODE.PERMITTED


4.50 CHANNEL_BIO_97_1.MODE.PERMITTED



Data Type BitString

Data Size 1



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.51 CHANNEL_BIO_97_1.MODE.TARGET



Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

4. Cxxxx Parameters

4.52. CHANNEL_BIO_97_1.PV_B


Remarks

4.52 CHANNEL_BIO_97_1.PV_B



Data Type BinaryValueStatus

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.53 CHANNEL_BIO_97_1.PV_B.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.54 CHANNEL_BIO_97_1.PV_B.VALUE

4. Cxxxx Parameters

4.55. CHANNEL_BO_96_1.FSTATE_TIME




Data Type Uint8

Data Size 1

Range 0 - OFF PV value OFF

255 - ON PV value ON

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.55 CHANNEL_BO_96_1.FSTATE_TIME

Specific to Block(s) Multi AI DI DO

Description The time from the output stale until output fault state.

Data Type Float

Data Size 4

Default

Class Static

Access Read/Write

Related Parameters

Remarks

4.56 CHANNEL_BO_96_1.FSTATE_VAL_B


Description The value of the output when in fault state.

4. Cxxxx Parameters

4.57. CHANNEL_BO_96_1.IO_OPTS


Data Type Uint8

Data Size 1

Range 0 - OFF OFF

255 - ON ON

Class Static

Access Read/Write

Related Parameters

Remarks

4.57 CHANNEL_BO_96_1.IO_OPTS


Description Options

Data Type BitString

Data Size 2

Range 1 - Invert Output Invert the output value

64 - Fault State to Value

Use fault state value

128 - Use Fault State on Restart

Use fault state on restart

Class Static

Access Read/Write

Related Parameters

Remarks

4.58 CHANNEL_BO_96_1.MODE


4. Cxxxx Parameters

4.59. CHANNEL_BO_96_1.MODE.ACTUAL



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.59 CHANNEL_BO_96_1.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

4.60 CHANNEL_BO_96_1.MODE.NORMAL



4. Cxxxx Parameters

4.61. CHANNEL_BO_96_1.MODE.PERMITTED


Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.61 CHANNEL_BO_96_1.MODE.PERMITTED



Data Type BitString

Data Size 1



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.62 CHANNEL_BO_96_1.MODE.TARGET



4. Cxxxx Parameters

4.63. CHANNEL_BO_96_1.OP_B


Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.63 CHANNEL_BO_96_1.OP_B


Description Channel output value.


Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.64 CHANNEL_BO_96_1.OP_B.STATUS



4. Cxxxx Parameters

4.65. CHANNEL_BO_96_1.OP_B.VALUE


Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.65 CHANNEL_BO_96_1.OP_B.VALUE



Data Type Uint8

Data Size 1



Class Dynamic

Access Read Only

Related Parameters

Remarks

4.66 CHANNEL_BO_96_1.READBACK_B


Description Channel readback value.


Data Size 2

4. Cxxxx Parameters

4.67. CHANNEL_BO_96_1.READBACK_B.STATUS


Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.67 CHANNEL_BO_96_1.READBACK_B.STATUS


Description Channel readback value status.

Data Type Uint8

Data Size 1

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.68 CHANNEL_BO_96_1.READBACK_B.VALUE



Data Type Uint8

Data Size 1



Class Static

4. Cxxxx Parameters

4.69. CHANNEL_SELECTION (ISA100 Configurable Channels)


Access Read Only

Related Parameters

Remarks

4.69 CHANNEL_SELECTION (ISA100 Configurable Channels)


Description ISA100 configurable channels

Data Type UINT16

Data Size 2

Range 1 - Channel 11 (2405 MHz) Channel 11 (2405 MHz)

2 - Channel 12 (2410 MHz) Channel 12 (2410 MHz)



32 - Channel 16 (2430 MHz)

Channel 16 (2430 MHz)

64 - Channel 17 (2435 MHz)


128 - Channel 18 (2440 MHz)


256 - Channel 19 (2445 MHz)


1024 - Channel 21 (2455 MHz)


2048 - Channel 22 (2460 MHz)


4096 - Channel 23 (2465 MHz)


4. Cxxxx Parameters

4.70. CJ_TEMPERATURE


8192 - Channel 24 (2470 MHz)


Class Constant

Access Read/Write

Related Parameters

Remarks

4.70 CJ_TEMPERATURE

Specific to Block(s) Multi AI DI DO, Multi AI DI, Temperature DI

Description Cold junction temperature.


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.71 CJ_TEMPERATURE.STATUS (Status)



Data Type Uint8

Data Size 1

4. Cxxxx Parameters

4.72. CJ_TEMPERATURE.VALUE (Value)


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.72 CJ_TEMPERATURE.VALUE (Value)



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.73 CMI


Description Corrosion mechanism indicator.


Data Size 5

Range

Class Dynamic

Access Read Only

4. Cxxxx Parameters

4.74. CMI.STATUS (Status)


Related Parameters

Remarks

4.74 CMI.STATUS (Status)



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.75 CMI.VALUE (Value)



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

4. Cxxxx Parameters

4.76. COMMREDUNALARMEN (Comm Redun Alarm)


Remarks

4.76 COMMREDUNALARMEN (Comm Redun Alarm)

Specific to Block(s) Applies to all FDAP and Field Devices.

Description Enable non-redundant communication alarm.

Data Type Boolean

Data Size 1

Range True/False

Class Dynamic

Access Read/Write

Related Parameters COMMREDUNSTATE

Remarks By default, this attribute is set true. To disable this alarm, manually set the attribute to false.

4.77 COMMREDUNRATIO (Comm Redun Ratio)


Description Communication Redundancy Ratio that identifies the percentage of time that a device has had redundant connectivity.

Data Type Uint8

Data Size 1

Range 0-100

Class Dynamic

Access Read Only

Related Parameters COMMREDUNSTATE and RESET_COUNTERS

Remarks This attribute is initialized to zero when the node is offline or

4. Cxxxx Parameters

4.78. COMMREDUNSTATE (Comm Redun State)


for access points (for which this does not apply). The Reset Counters command resets this attribute to 0 or 100% based on its current communication redundancy state.

4.78 COMMREDUNSTATE (Comm Redun State)


Description Current node communication redundancy state.

Data Type Uint8

Data Size 1

Range For a secondary connection to be redundant it needs to have bi-directional communication paths and a secondary clock source.

0 - Not Applicable Not Applicable

1 - Non-Redundant No secondary neighbor.

2 - Non-Redun, NoSecDown

Secondary neighbor with uplink communication path only.

3 - Non-Redun, NoSecUp Secondary neighbor with downlink communication path only.

4 - Non-Redun, NoSecClk Secondary neighbor with uplink and downlink communication paths but no secondary clock source.

5 - Redundant, SingleAP Redundant with single access point

6 - Redundant Redundant

Class Dynamic

Access Read Only

Related Parameters COMMREDUNRATIO and COMMREDUNALARMEN

4. Cxxxx Parameters

4.79. COUNTRY_CODE (Country Code)


Remarks This is initialized to zero when the node is offline or for access points.

4.79 COUNTRY_CODE (Country Code)


Description Indicates the country code.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

4.80 CPUFREE (CPU Free)


Description Average free Central Processing Unit (CPU).

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4. Cxxxx Parameters

4.81. CPUFREEMIN (CPU Free Min)


4.81 CPUFREEMIN (CPU Free Min)


Description Low water mark of the Central Processing Unit (CPU).

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.82 CTS_VERSION (CTS Version)

Specific to Block(s) Corrosion, HLAI, Multi AI DI DO, Multi AI DI, Pressure, Temperature DI, OWA, EnrafFlexLine

Description Field device application CTS version.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

4.83 Current_AIO_99_2.CAL_CMD



4. Cxxxx Parameters

4.84. Current_AIO_99_2.CAL_POINT_HI


Data Type Uint8

Data Size 1

Range None No value





Class Dynamic

Access Read/Write

Related Parameters

Remarks

4.84 Current_AIO_99_2.CAL_POINT_HI



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.85 Current_AIO_99_2.CAL_POINT_LO



4. Cxxxx Parameters

4.86. Current_AIO_99_2.CAL_SOURCE


Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.86 Current_AIO_99_2.CAL_SOURCE



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks

4.87 Current_AIO_99_2.CAL_STATUS



Data Type Uint8

4. Cxxxx Parameters

4.88. Current_AIO_99_2.CAL_UNIT


Data Size 1

Range None No value






Bad Units Bad units




Class Dynamic

Access Read Only

Related Parameters

Remarks

4.88 Current_AIO_99_2.CAL_UNIT



Data Type Uint16

Data Size 2



° degree

rev revolution

L liter

4. Cxxxx Parameters

4.88. Current_AIO_99_2.CAL_UNIT


gallon US gallon


Pa pascal

kPa kilopascal







mmHg (0 °C) millimeters of mercury at 0 °C

mA milliampere

V Volt

% percent



pH pH




Class Static

Access Read/Write

Related Parameters

Remarks

4. Cxxxx Parameters

4.89. Current_AIO_99_2.FILTER_COEFFICIENT


4.89 Current_AIO_99_2.FILTER_COEFFICIENT


Description Filter constant for Analog Input filter.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.90 Current_AIO_99_2.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.91 Current_AIO_99_2.MODE.ACTUAL



4. Cxxxx Parameters

4.92. Current_AIO_99_2.MODE.NORMAL


Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

4.92 Current_AIO_99_2.MODE.NORMAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.93 Current_AIO_99_2.MODE.PERMITTED


4. Cxxxx Parameters

4.94. Current_AIO_99_2.MODE.TARGET



Data Type BitString

Data Size 1



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.94 Current_AIO_99_2.MODE.TARGET



Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

4.95 Current_AIO_99_2.PV

4. Cxxxx Parameters

4.96. Current_AIO_99_2.PV.STATUS





Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.96 Current_AIO_99_2.PV.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.97 Current_AIO_99_2.PV.VALUE



Data Type Float

4. Cxxxx Parameters

4.98. Current_AIO_99_2.SCALE


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

4.98 Current_AIO_99_2.SCALE



Data Type Scaling

Data Size 11

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.99 Current_AIO_99_2.SCALE.DECIMAL



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

4. Cxxxx Parameters

4.100. Current_AIO_99_2.SCALE.EU_0


Related Parameters

Remarks

4.100 Current_AIO_99_2.SCALE.EU_0



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4.101 Current_AIO_99_2.SCALE.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

4. Cxxxx Parameters

4.102. Current_AIO_99_2.SCALE.UNITS_INDEX


4.102 Current_AIO_99_2.SCALE.UNITS_INDEX



Data Type Uint16

Data Size 2



° degree

rev revolution

L liter

gallon US gallon


Pa pascal

kPa kilopascal





inH2O (4 °C) inches of water at 4 °C



mA milliampere

V volt

% percent


4. Cxxxx Parameters

4.103. Current_AIO_99_2.SENSOR_TYPE



pH pH




Class Static

Access Read/Write

Related Parameters

Remarks

4.103 Current_AIO_99_2.SENSOR_TYPE


Description Describes the type of sensors

Data Type Uint8

Data Size 1

Range 4-20 mA

0-20 mA

Class Static

Access Read/Write

Related Parameters

Remarks

4.104 CURTIME (Current Time)


Description Current time

4. Cxxxx Parameters

4.104. CURTIME (Current Time)


Data Type Timeval

Data Size 0

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


5. Dxxxx Parameters

5.1 DATE_CODE

Specific to Block(s) OWA (HART interface channel)

Description HART transmitter date code.

Data Type OctetString

Data Size 3

Range

Class Static

Access Read Only

Related Parameters

Remarks

5.2 DENSITY (Density)


Description Electrode material density constant.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

5.3 DESC (Description)

5. Dxxxx Parameters

5.4. DESCR



Description User-defined WDM description string.

Data Type VisibleString

Data Size 256

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

5.4 DESCR


Description HART transmitter device description.


Data Size 16

Range

Class Static

Access Read only

Related Parameters

Remarks

5.5 DETAIL_STATUS


Description Detail status.

Data Type Uint8

Data Size 1

5. Dxxxx Parameters

5.6. DEV_REV


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.6 DEV_REV


Description Device revision

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

5.7 DEV_STATUS


Description HART transmitter status.

Data Type BitString

Data Size 1

Range 128 - Device Malfunction

64 - Configuration Change

32 - Cold Start

5. Dxxxx Parameters

5.8. DEVICE_ROLE_ASSIGNED (Assigned Role)


16 - More Status Available

8 - Loop Current Fixed

4 - Loop Current Saturated

2 - Non-PV Out of Limits

1 - PV Out of Limits

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.8 DEVICE_ROLE_ASSIGNED (Assigned Role)

Specific to Block(s) Corrosion, FDAP, HLAI, Multi AI DI DO, Multi AI DI, Pressure, Temperature DI, OWA, EnrafFlexLine

Description Field device radio current role.

Data Type Uint16

Data Size 2

Range 128 - Provisioning Device

64 - System Time Source

32 - Security Manager

16 - System Manager

8 – Gateway

4 - Access Point

2 - Routing Device

1 - I/O Device

Class Constant

Access Read Only

5. Dxxxx Parameters

5.9. DEVICE_ROLE_CAPABILITY (Role Capability)


Related Parameters

Remarks

5.9 DEVICE_ROLE_CAPABILITY (Role Capability)


Description Field device radio role capability.

Data Type Uint16

Data Size 2

Range 128 - Provisioning Device

64 - System Time Source

32 - Security Manager

16 - System Manager

8 - Gateway

4 - Access Point

2 - Routing Device

1 - I/O Device

Class Constant

Access Read Only

Related Parameters

Remarks

5. Dxxxx Parameters

5.10. Device Profile Parameters


5.10 Device Profile Parameters

Specific to Block(s) Corrosion, HLAI, Multi AI DI, Temperature DI, OWA

Description Field device application diagnostic status bitstring.

Data Type BitString

Data Size 4

Range Failure Status

Function Check Status

Out of Specification Status

Maintenance Required Status

Fault in Electronics

Faults in Sensor or Actuator Element

Installation or Calibration Problem

Power is Critically Low: Maintenance Need Short-term.

Configuration Error

Detail information available

Class Dynamic

Access Read Only

Related Parameters

Remarks



5. Dxxxx Parameters

5.10. Device Profile Parameters


Data Type BitString

Data Size 4









Configuration Error

Output at Failsafe


Class Dynamic

Access Read Only

Related Parameters

Remarks

Specific to Block(s) Pressure


Data Type BitString

Data Size 4





5. Dxxxx Parameters

5.11. Device Vendor Parameters





Outside Sensor Limits


Configuration Error


Class Dynamic

Access Read Only

Related Parameters

Remarks



Data Type BitString

Data Size 4

Range Faults in Sensor or Actuator Element


Class Dynamic

Access Read Only

Related Parameters

Remarks

5.11 Device Vendor Parameters

Specific to Block(s) Temperature DI

Description Device self-diagnosis information.

5. Dxxxx Parameters



Data Type BitString

Data Size 4

Range Electronics Failure An electronic component has failed

Input Failure Input or sensor failure

Low Battery Battery needs replacement

Calibration Error Persistent calibration error

No Radio Error Radio is not present or not functioning

Low External Power

External power is low

Program Memory Fault

Program memory is corrupted

RAM Fault Random access memory is corrupted

NVM Fault Non-volatile memory is corrupted

ADC Failure Analog to digital converter failed

Input 1 Failure Channel 1 input failure



Input 1 Warning Channel 1 input warning



Input 1 Calibration Failure

Channel 1 calibration failed





Cold Junction Cold junction failure

5. Dxxxx Parameters



Failure

Class Dynamic

Access Read Only

Related Parameters

Remarks

Specific to Block(s) Corrosion


Data Type BitString

Data Size 4






Low External Power External power is low

Program Memory Fault Program memory is corrupted




Electrode Short Circuit Electrode Short Circuit

Electrode Open Circuit or Electrode Open Circuit or

5. Dxxxx Parameters



LPR Mode Error LPR Mode error

Excess Calibration Correction Extra calibration performed

Harmonic Distortion Mode Not Possible

Harmonic distortion mode cannot be set

Asymmetric Response From Probe

Asymmetric response

DAC Voltage Deviation Voltage deviation

Calibration Cleared Calibration reset performed

Class Dynamic

Access Read Only

Related Parameters

Remarks

Specific to Block(s) HLAI


Data Type BitString

Data Size 4








RAM Fault Random access memory is

5. Dxxxx Parameters



corrupted



Input Calibration Failure Input calibration failed

Class Dynamic

Access Read Only

Related Parameters

Remarks


Description Diag status detail

Data Type BitString

Data Size 4










5. Dxxxx Parameters




Characterization Memory Fault

Characterization memory fault

Meter Body Over Temperature

Meter body over temperature

Meter Body Overload Pressure input exceeds twice the upper range limit

Excess Zero Calibration Zero calibration exceeds 5 percent

Excess Span Calibration Span calibration exceeds 5 percent

Excess Calibrated Range Calibrated span exceeds the sensor span

Calibration Cleared Calibration was reset

Class Dynamic

Access Read Only

Related Parameters

Remarks



Data Type BitString

Data Size 4




5. Dxxxx Parameters






Output Stale Failure Output is stale







Input 1 Warning Channel 1 thermocouple warning


Input 1 Calibration Failure Channel 1 calibration failed


Cold Junction Failure Cold junction failure

Class Dynamic

Access Read Only

Related Parameters

Remarks

Specific to Block(s) Multi AI DI

5. Dxxxx Parameters




Data Type BitString

Data Size 4

















5. Dxxxx Parameters





Cold Junction Failure Cold junction failure

Class Dynamic

Access Read Only

Related Parameters

Remarks

Specific to Block(s) OWA


Data Type BitString

Data Size 4




Radio Not Detected Radio is not present or not functioning





No HART Loop Power HART loop power is not present

5. Dxxxx Parameters



No HART Device HART device is not detected

HART Device Maintenance Required

HART device maintenance required extended device status

HART Device Variable Alert

HART device variable alert extended device status

HART Device Burst Mode HART device is in Burst Mode

Class Dynamic

Access Read Only

Related Parameters

Remarks



Data Type BitString

Data Size 4

Range No level board input No level board input

No Temperature input No Temperature input

Program Memory Fault Program memory corrupted

RAM Fault Random access memory corrupted

NVM Fault Non-volatile memory corrupted

Class Dynamic

Access Read Only

Related Parameters

Remarks

5. Dxxxx Parameters

5.12. DISTR_CODE


5.12 DISTR_CODE


Description Distributor code.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

5.13 DIV_CORRECT_PKT_COUNT

Specific to Block(s) FDAP

Description Number of packets received with CRC errors and corrected using antenna diversity.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.14 DIV_CORRECTION_GAIN (Correction Gain)


Description Antenna diversity correction gain.

5. Dxxxx Parameters

5.15. DIV_DIVERSITY_OPERATION (Diversity Operation)


Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.15 DIV_DIVERSITY_OPERATION (Diversity Operation)


Description Antenna diversity operation.

Data Type Uint8

Data Size 1

Range Both Radios

Radio 1

Radio 2

Class Dynamic

Access Read Only

Related Parameters

Remarks

5. Dxxxx Parameters

5.16. DIV_ERR_PKT_COUNT


5.16 DIV_ERR_PKT_COUNT


Description Number of packets received with CRC errors.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.17 DIV_ERROR_DIST_COUNT


Description Number of packets received with 2, 3, 4, 5, or 6 byte errors.

Data Type Uint32[5]

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.18 DIV_RADIO1_RX_DPDU


Description Total number of DPDU received by radio 1 of this FDAP.

5. Dxxxx Parameters

5.19. DIV_RADIO2_RX_DPDU


Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.19 DIV_RADIO2_RX_DPDU


Description Total number of DPDU received by radio 2 of this FDAP.

Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.20 DIV_REDUNDANCY_GAIN (Redundancy Gain)


Description Antenna diversity redundancy gain.

Data Type Uint8

Data Size 1

Range

5. Dxxxx Parameters

5.21. DIV_RESETSTATS


Class Dynamic

Access Read Only

Related Parameters

Remarks

5.21 DIV_RESETSTATS


Description Reset antenna diversity statistics.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

5.22 DIV_TOTAL_RX_DPDU


Description Total number of DPDU received by this FDAP.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5. Dxxxx Parameters

5.23. DL_ALIAS_16_BIT


5.23 DL_ALIAS_16_BIT


Description Field device radio short address.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

5.24 DLMO_CHANNEL_DIAG


Description Channel diagnostics.

Data Type ChannelDiag[16]

Data Size 3

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.25 DLMO_CHANNEL_DIAG.BACKOFF

5. Dxxxx Parameters

5.26. DLMO_CHANNEL_DIAG.CHANNEL



Description Percentage of transmissions for this channel aborted due to CCA back off.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.26 DLMO_CHANNEL_DIAG.CHANNEL


Description Channel number.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.27 DLMO_CHANNEL_DIAG.NO_ACK


5. Dxxxx Parameters

5.28. DLMO_NEIGHBOR_DIAG


Description Percentage of transmissions for this channel that did not receive an ACK or NACK.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.28 DLMO_NEIGHBOR_DIAG


Description Neighbor diagnostics.

Data Type NeighborDiag[8]

Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.29 DLMO_NEIGHBOR_DIAG.CLOCK_SIGMA


Description Standard deviation of clock corrections with respect to this neighbor.

Data Type Int16

5. Dxxxx Parameters

5.30. DLMO_NEIGHBOR_DIAG.CONN_TYPE


Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.30 DLMO_NEIGHBOR_DIAG.CONN_TYPE


Description Reason this node has an active connection with this neighbor.

Data Type Uint8

Data Size 1

Range 0 - Inactive Inactive connection with the neighbor.

1 - Parent This node serves as a route or time sync parent to its neighbor.

2 - Primary Primary communication connection.

3 - Secondary Secondary communication connection.

4 - Time Sync Time Sync.

5 - High Speed

Extra route for 1 sec publications or firmware download.

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.31 DLMO_NEIGHBOR_DIAG.NEIGHBOR

5. Dxxxx Parameters

5.32. DLMO_NEIGHBOR_DIAG.RSQI



Description Neighbor name.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.32 DLMO_NEIGHBOR_DIAG.RSQI


Description Received Signal Quality Indicator (RSQI) with respect to this neighbor.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.33 DLMO_NEIGHBOR_DIAG.RSSI


Description Received Signal Strength Indicator (RSSI) with respect to this neighbor.

5. Dxxxx Parameters

5.34. DLMO_NEIGHBOR_DIAG.RX_DPDU


Data Type Int16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

5.34 DLMO_NEIGHBOR_DIAG.RX_DPDU


Description Number of successful receives from this neighbor.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters RESET_COUNTERS

Remarks This count excludes ACKs, NACKs, and DPDUs without payloads. Reset to zero by the Reset Counters attribute.

5.35 DLMO_NEIGHBOR_DIAG.TX_BACKOFF


Description Number of transmissions to this neighbor that were aborted due to carrier sense multiple accesses with collision avoidance (CSMA/CA) back off.

Data Type Uint16

Data Size 2

5. Dxxxx Parameters

5.36. DLMO_NEIGHBOR_DIAG.TX_FAILED


Range

Class Dynamic

Access Read Only


Remarks These terminated transmissions are not included in TX Failed. Reset to zero by the Reset Counters attribute.

5.36 DLMO_NEIGHBOR_DIAG.TX_FAILED


Description Number of failed unicast transmissions to this neighbor.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only


Remarks A transmission fails when no ACK or NACK was received in response. Reset to zero by the Reset Counters attribute.

5.37 DLMO_NEIGHBOR_DIAG.TX_NACK


Description Number of NACKs received from this neighbor.

Data Type Uint16

Data Size 2

Range

Class Dynamic

5. Dxxxx Parameters

5.38. DLMO_NEIGHBOR_DIAG.TX_SUCCESS


Access Read Only


Remarks This count is not included in the TX Failed count. Reset to zero by the Reset Counters attribute.

5.38 DLMO_NEIGHBOR_DIAG.TX_SUCCESS


Description Number of successful transmissions to this neighbor.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only


Remarks A transmission succeeds when an ACK was received in response. Reset to zero by the Reset Counters attribute.

5. Dxxxx Parameters

5.39. DLMO_RADIO_TRANSMIT_POWER (Transmit Power Level)


5.39 DLMO_RADIO_TRANSMIT_POWER (Transmit Power Level)


Description Radio maximum transmit level.

Data Type Int8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

5.40 DROP_OFF_COUNT (Device Drop Off Count)


Description Field device radio network drop-off counter.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

5. Dxxxx Parameters

5.40. DROP_OFF_COUNT (Device Drop Off Count)



6. Exxxx Parameters

6.1 ELECTRODE_AREA (Electrode Area)


Description Surface area of the electrode.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

6.2 ENRAF.ENRAFLICENSED



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks

6. Exxxx Parameters

6.3. ENRAFFLEXCONNINSTADDR


6.3 ENRAFFLEXCONNINSTADDR

Specific to Block(s) WDM ENRAF

Description The ENRAF address table.

Data Type UINT16

Data Size 0

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.4 ENRAFGPUCIUADDR



Data Type Uint8[256]

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.5 ENRAFGPUCIUADDREMU




6. Exxxx Parameters

6.6. ENRAFGPUINSTADDR


Data Size 1

Range 1 - Enabled Enable CIU address emulation.

2 - Disabled Disable CIU address emulation.

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.6 ENRAFGPUINSTADDR




Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.7 ENRAFGPURECORDPUB




Data Size 1

Range 0 - Disabled Do not publish any GPU record.

6. Exxxx Parameters

6.8. ENRAFINTERFACEENABLE (Interface)


1 - B Record Publish GPU B record.

2 - C Record Publish GPU C record.

3 - D Record Publish GPU D record.

4 - L Record Publish GPU L record.

5 - M Record Publish GPU M record.

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.8 ENRAFINTERFACEENABLE (Interface)


Description Enable ENRAF Serial or ENRAF Ethernet/UDP interface.

Data Type Uint16

Data Size 2

Range Disabled ENRAF interface is disabled.

Serial Interface Enable ENRAF serial interface.

Ethernet/UDP Interface Enable ENRAF Ethernet/UDP interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

6.9 ENRAFLICENSED


6. Exxxx Parameters

6.10. ENRAFRESETSTATS



Data Type Uint8

Data Size 1



Class Dynamic

Access Read Only

Related Parameters

Remarks

6.10 ENRAFRESETSTATS


Description Reset ENRAF interface statistics.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

6.11 ENRAFSERIALBAUDRATE (Baud Rate)


Description ENRAF serial port baud rate.

Data Type Uint32

Data Size 4

6. Exxxx Parameters

6.12. ENRAFSERIALMSGCOUNT


Range 300 Use 300 baud for ENRAF serial interface.

1200 Use 1200 baud for ENRAF serial interface.






Class Dynamic

Access Read/Write

Related Parameters

Remarks

6.12 ENRAFSERIALMSGCOUNT


Description Number of messages received from ENRAF serial clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.13 ENRAFSERIALMSGRATE (Message Rate)


Description Number of messages received per second from ENRAF

6. Exxxx Parameters

6.14. ENRAFSERIALMSGRATEMAX (Message Rate Max)


serial clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.14 ENRAFSERIALMSGRATEMAX (Message Rate Max)


Description High water mark of messages received per second from ENRAF serial clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.15 ENRAFSERIALPARITY (Parity)


Description The ENRAF serial port parity.

Data Type Uint32

Data Size 4

6. Exxxx Parameters

6.16. ENRAFSERIALPORT (Serial Port)


Range 0 - None Use no parity for ENRAF Serial interface.

768 - Odd Use odd parity for ENRAF Serial interface.

256 - Even Use even parity for ENRAF Serial interface.

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.16 ENRAFSERIALPORT (Serial Port)


Description ENRAF serial port.

Data Type Uint16

Data Size 2

Range COM1 Use COM1 for ENRAF serial interface.

COM2 Use COM2 for ENRAF serial interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

6.17 ENRAFTAGNAME


Description ENRAF Address Table.

Data Type VisibleString[256]

6. Exxxx Parameters

6.18. ENRAFUDPMSGCOUNT


Data Size 0

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

6.18 ENRAFUDPMSGCOUNT


Description Number of messages received from ENRAF Ethernet/UDP clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.19 ENRAFUDPMSGRATE (Message Rate)


Description Number of messages received per second from ENRAF Ethernet/UDP clients.

Data Type Float

Data Size 4

Range

6. Exxxx Parameters

6.20. ENRAFUDPMSGRATEMAX (Message Rate Max)


Class Dynamic

Access Read Only

Related Parameters

Remarks

6.20 ENRAFUDPMSGRATEMAX (Message Rate Max)


Description Number of messages received per second from ENRAF Ethernet/UDP clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

6.21 ENRAFUDPPORT (UDP Port)


Description The ENRAF Ethernet/UDP port.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

6. Exxxx Parameters

6.22. EUI_64 (EUI64)


Remarks

6.22 EUI_64 (EUI64)


Description Field device radio EUI64 unique identifier.


Data Size 0

Range

Class Constant

Access Read Only

Related Parameters

Remarks

6.23 EXECREQCNT (Request)


Description Field device radio DMAP executes requests.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters EXECRESCNT, EXECTMOCNT, and RESET_COUNTERS

Remarks Reset to zero by the Reset Counters attribute.

6.24 EXECRESCNT (Response)

6. Exxxx Parameters

6.25. EXECTMOCNT (Timeout)



Description Field device radio DMAP executes responses.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters EXECREQCNT, EXECTMOCNT, and RESET_COUNTERS


6.25 EXECTMOCNT (Timeout)


Description Field device radio DMAP executes timeouts.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters EXECREQCNT, EXECRESCNT, and RESET_COUNTERS



7. Fxxxx Parameters

7.1 FAILURE_STATUS_ALERT

Specific to Block(s) Corrosion, HLAI, Multi AI DI DO, Multi AI DI, Pressure, Temperature DI, OWA

Description Failure status alert.

Data Type BinaryAlarmDesc

Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7.2 FAILURE_STATUS_ALERT.ALERT_DISABLE (Alert Disable)


Description Enable or disable the alert.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7. Fxxxx Parameters

7.3. FAILURE_STATUS_ALERT.ALERT_PRIORITY (Alert Priority)


7.3 FAILURE_STATUS_ALERT.ALERT_PRIORITY (Alert Priority)


Description Priority set for the alert.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7.4 FDAP_DIAGNOSTICS (Diagnostics)


Description FDAP Diagnostics.

Data Type Uint8

Data Size 1

Range 32 - Radio2 Comm Fail Radio2 Comm Fail

16 - Radio1 Comm Fail Radio1 Comm Fail

8 - Time Sync Redundancy Fail

Time Sync Redundancy Fail

Class Constant

Access Read Only

Related Parameters

Remarks

7. Fxxxx Parameters

7.5. FILTER_COEFFICIENT (Filter Coefficient)


7.5 FILTER_COEFFICIENT (Filter Coefficient)

Specific to Block(s) HLAI (AI channel), Multi AI DI DO (CurrAI and TempAI channels), Multi AI DI (CurrAI and TempAI channels), Temperature DI (TempAI channel)


Data Type Uint16

Data Size 2

Range

Class Dynamic

Static - Multi AI DI (CurrAI channel), Multi AI DI (TempAI channel)

Access Read/Write

Related Parameters

Remarks

7.6 FIXED_B_VALUE (Fixed B Value)


Description User-configurable B value.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7.7 FIXED_CHANNELS (ISA100 Fixed Channels)

7. Fxxxx Parameters

7.8. FSTATE_TIME (Fault State Time)



Description ISA100 network channel selection.

Data Type Uint16

Data Size 2

Range 16 - Channel 15 (2425 MHz)


512 - Channel 20 (2450 MHz)


16384 - Channel 25 (2475 MHz)


Class Constant

Access Read Only

Related Parameters

Remarks

7.8 FSTATE_TIME (Fault State Time)

Specific to Block(s) Multi AI DI DO (DO channel)

Description Time limit for no publishes before output stale failure.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7.9 FSTATE_VAL_B (Fault state Value)

7. Fxxxx Parameters

7.10. FUNCTION_CHECK_ALERT



Description Fault state discrete value.

Data Type Uint8

Data Size 1

Range OFF PV value OFF

ON PV value ON

Class Static

Access Read/Write

Related Parameters

Remarks

7.10 FUNCTION_CHECK_ALERT


Description Function check alert.


Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7.11 FUNCTION_CHECK_ALERT.ALERT_DISABLE (Alert Disable)


7. Fxxxx Parameters

7.12. FUNCTION_CHECK_ALERT.ALERT_PRIORITY (Alert Priority)



Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

7.12 FUNCTION_CHECK_ALERT.ALERT_PRIORITY (Alert Priority)



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks


8. Gxxxx Parameters

8.1 GCI.GILICENSED



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks

8.2 GCIALERTCOUNT

Specific to Block(s) WDM CGI

Description Number of alerts sent to the GCI clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8. Gxxxx Parameters

8.3. GCIALERTRATE (Alert Rate)


8.3 GCIALERTRATE (Alert Rate)


Description Number of alerts sent per second to the GCI clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.4 GCIALERTRATEMAX (Alert Rate Max)


Description High water mark of alerts sent per second to the GCI clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.5 GCICLIENTCOUNT (Connected Clients)


Description Number of clients connected to the GCI Server.

8. Gxxxx Parameters

8.6. GCICONNCLIENT


Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.6 GCICONNCLIENT


Description Number of clients connected to the GCI Server.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.7 GCICONNSESSION


Description Number of sessions between clients and GCI Server.

Data Type Uint16

Data Size 2

Range

8. Gxxxx Parameters

8.8. GCIINTERFACEENABLE (Interface)


Class Dynamic

Access Read Only

Related Parameters

Remarks

8.8 GCIINTERFACEENABLE (Interface)


Description Enable GCI Ethernet/TCP interface.

Data Type Uint16

Data Size 2

Range 0 – Disabled GCI interface is disabled.

1 – TCP Interface Enable GCI Ethernet/TCP interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

8.9 GCILEASECOUNT (Number of Leases)


Description Number of leases in use across all the clients.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

8. Gxxxx Parameters

8.10. GCILICENSED


Related Parameters

Remarks

8.10 GCILICENSED



Data Type Uint8

Data Size 1



Class Dynamic

Access Read Only

Related Parameters

Remarks

8.11 GCIPUBLISHCOUNT


Description Number of publications sent to the GCI clients.

Data Type Unit32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8. Gxxxx Parameters

8.12. GCIPUBLISHRATE (Publication Rate)


8.12 GCIPUBLISHRATE (Publication Rate)


Description Number of publications sent per second to the GCI clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.13 GCIPUBLISHRATEMAX (Publication Rate Max)


Description High water mark of publications sent per second to the GCI clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.14 GCIREQCOUNT


Description Number of requests received from the GCI clients.

8. Gxxxx Parameters

8.15. GCIREQRATE (Request Rate)


Data Type Unit32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.15 GCIREQRATE (Request Rate)


Description Number of requests received per second from the GCI clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.16 GCIREQRATEMAX (Request Rate Max)


Description High water mark of requests received per second from the GCI clients.

Data Type Float

8. Gxxxx Parameters

8.17. GCIRESETSTATS


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

8.17 GCIRESETSTATS


Description Reset GCI statistics.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

8.18 GCISESSIONCOUNT (Number of Sessions)


Description Number of sessions between the clients and the GCI server.

Data Type Uint16

Data Size 2

Range

Class Dynamic

8. Gxxxx Parameters

8.19. GCITCPPORT (TCP Port)


Access Read Only

Related Parameters

Remarks

8.19 GCITCPPORT (TCP Port)


Description GCI Ethernet/TCP port.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks


9. Hxxxx Parameters

9.1 HART_REV


Description HART revision

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

9.2 HART.HARTLICENSED



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks

9. Hxxxx Parameters

9.3. HARTDEVTYPE


9.3 HARTDEVTYPE

Specific to Block(s) WDM HART

Description HART ISA100.11A.11a vendor/model string to HART manufacturer ID/service type mapping table.


Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.4 HARTINTERFACEENABLE (Interface)


Description Enable HART Serial or HART Ethernet/UDP interface.

Data Type Uint16

Data Size 2

Range 0 - Disabled HART interface is disabled.

1 - Serial Interface Enable HART serial interface.

2 - Ethernet/UDP Interface

Enable HART Ethernet/UDP interface.

3 - HART/IP Interface Enable HART IP interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9. Hxxxx Parameters

9.5. HARTLICENSED


9.5 HARTLICENSED



Data Type Uint8

Data Size 1



Class Dynamic

Access Read Only

Related Parameters

Remarks

9.6 HARTLOOPIDX


Description Emulated HART MUX loop index table.


Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.7 HARTLOOPIDXADDR


Description Address of the emulated HART MUX loop index table.

9. Hxxxx Parameters

9.8. HARTLOOPIDXNAME


Data Type OctetString[256]

Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.8 HARTLOOPIDXNAME


Description Name of the emulated HART MUX loop index table.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.9 HARTLOOPIDXSTATUS


Description Status of the emulated HART MUX loop index table.


Data Size 2

Range ---- (Blank) No device is connected.

1 - Dead Previously connected device is

9. Hxxxx Parameters

9.10. HARTMANID


offline.

2 - Mismatched Device is connected and online, also device identity has changed.

3 - Alive Device is connected and online.

4 - OWA Init, Mismatched

OneWireless adapter is connected and online. The device identity has changed, and the WDM attempting to identify the HART device is connected to OWA.

5 - OWA Init, Alive

OneWireless adapter is connected and online. The WDM attempting to identify HART device is connected to OWA.

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.10 HARTMANID


Description HART ISA100.11A vendor/model string to HART manufacturer ID/service type mapping table.


Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9. Hxxxx Parameters

9.11. HARTMODEL


9.11 HARTMODEL




Data Size 16

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.12 HARTPOLLINGADDR (Serial Polling Address)


Description Emulated HART MUX polling address.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.13 HARTRESETSTATS


Description Reset HART interface statistics.

9. Hxxxx Parameters

9.14. HARTSERIALBAUDRATE (Baud Rate)


Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.14 HARTSERIALBAUDRATE (Baud Rate)


Description HART serial port baud rate.

Data Type Uint32

Data Size 4

Range 300 Use 300 baud for HART serial interface.

1200 Use 1200 baud for HART serial interface.








Class Dynamic

Access Read/Write

Related Parameters

Remarks

9. Hxxxx Parameters

9.15. HARTSERIALMSGCOUNT


9.15 HARTSERIALMSGCOUNT


Description Number of messages received from the HART serial clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.16 HARTSERIALMSGRATE (Message Rate)


Description Number of messages received per second from the HART serial clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.17 HARTSERIALMSGRATEMAX (Message Rate Max)

9. Hxxxx Parameters

9.18. HARTSERIALPARITY (Parity)



Description High water mark of messages received per second from the HART serial clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.18 HARTSERIALPARITY (Parity)


Description HART serial port parity.

Data Type Uint32

Data Size 4

Range 0 - None Use no parity for HART serial interface.

768 - Odd Use odd parity for HART serial interface.

256 - Even Use even parity for HART serial interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.19 HARTSERIALPORT (Serial Port)


9. Hxxxx Parameters

9.20. HARTTCPMSGCOUNT


Description HART serial port.

Data Type Uint16

Data Size 2

Range COM1 Use COM1 for HART serial interface.

COM2 Use COM2 for HART serial interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.20 HARTTCPMSGCOUNT


Description Number of messages received from HART/IP clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.21 HARTTCPMSGRATE (Message Rate)


Description Number of messages received per second from HART/IP clients.

Data Type Float

9. Hxxxx Parameters

9.22. HARTTCPMSGRATEMAX (Message Rate Max)


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.22 HARTTCPMSGRATEMAX (Message Rate Max)


Description Number of messages received per second from HART/IP clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.23 HARTTCPPOLLINGADDR (HART/IP Polling Address)


Description The HART/IP polling address.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

9. Hxxxx Parameters

9.24. HARTTCPPORT (TCP Port)


Related Parameters

Remarks

9.24 HARTTCPPORT (TCP Port)


Description The HART/IP TCP port.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.25 HARTUDPMSGCOUNT


Description Number of messages received from the HART Ethernet/UDP clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9. Hxxxx Parameters

9.26. HARTUDPMSGRATE (Message Rate)


9.26 HARTUDPMSGRATE (Message Rate)


Description Number of messages received per second from the HART Ethernet/UDP clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.27 HARTUDPMSGRATEMAX (Message Rate Max)


Description Number of messages received per second from the HART Ethernet/UDP clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.28 HARTUDPPORT (UDP Port)


9. Hxxxx Parameters

9.29. HARTVENDOR


Description HART Ethernet/UDP port.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.29 HARTVENDOR




Data Size 16

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.30 HLAI_AIO_BLK_99_0.CAL_CMD



Data Type Uint8

Data Size 1

9. Hxxxx Parameters

9.31. HLAI_AIO_BLK_99_0.CAL_POINT_HI


Range None No value





Class Dynamic

Access Read/Write

Related Parameters

Remarks

9.31 HLAI_AIO_BLK_99_0.CAL_POINT_HI



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.32 HLAI_AIO_BLK_99_0.CAL_POINT_LO



Data Type Float

9. Hxxxx Parameters

9.33. HLAI_AIO_BLK_99_0.CAL_SOURCE


Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.33 HLAI_AIO_BLK_99_0.CAL_SOURCE



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks

9.34 HLAI_AIO_BLK_99_0.CAL_STATUS



Data Type Uint8

Data Size 1

Range None No value

9. Hxxxx Parameters

9.35. HLAI_AIO_BLK_99_0.CAL_UNIT







Bad Units Bad units




Class Dynamic

Access Read Only

Related Parameters

Remarks

9.35 HLAI_AIO_BLK_99_0.CAL_UNIT



Data Type Uint16

Data Size 2



° degree

rev revolution

L liter

gallon US gallon


9. Hxxxx Parameters

9.36. HLAI_AIO_BLK_99_0.FILTER_COEFFICIENT


Pa Pascal

kPa kilopascal








mA milliampere

V volt

% percent



pH pH




Class Static

Access Read/Write

Related Parameters

Remarks

9.36 HLAI_AIO_BLK_99_0.FILTER_COEFFICIENT



9. Hxxxx Parameters

9.37. HLAI_AIO_BLK_99_0.MODE


Data Type Uint16

Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.37 HLAI_AIO_BLK_99_0.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.38 HLAI_AIO_BLK_99_0.MODE.ACTUAL



Data Type Uint8

Data Size 1


9. Hxxxx Parameters

9.39. HLAI_AIO_BLK_99_0.MODE.NORMAL


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

9.39 HLAI_AIO_BLK_99_0.MODE.NORMAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

9.40 HLAI_AIO_BLK_99_0.MODE.PERMITTED



Data Type BitString

Data Size 1


9. Hxxxx Parameters

9.41. HLAI_AIO_BLK_99_0.MODE.TARGET



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

9.41 HLAI_AIO_BLK_99_0.MODE.TARGET



Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

9.42 HLAI_AIO_BLK_99_0.PV




9. Hxxxx Parameters

9.43. HLAI_AIO_BLK_99_0.PV.STATUS


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.43 HLAI_AIO_BLK_99_0.PV.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

9.44 HLAI_AIO_BLK_99_0.PV.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

9. Hxxxx Parameters

9.45. HLAI_AIO_BLK_99_0.SCALE


Related Parameters

Remarks

9.45 HLAI_AIO_BLK_99_0.SCALE



Data Type Scaling

Data Size 11

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.46 HLAI_AIO_BLK_99_0.SCALE.DECIMAL



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9. Hxxxx Parameters

9.47. HLAI_AIO_BLK_99_0.SCALE.EU_0


9.47 HLAI_AIO_BLK_99_0.SCALE.EU_0



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.48 HLAI_AIO_BLK_99_0.SCALE.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

9.49 HLAI_AIO_BLK_99_0.SCALE.UNITS_INDEX



Data Type Uint16

9. Hxxxx Parameters

9.49. HLAI_AIO_BLK_99_0.SCALE.UNITS_INDEX


Data Size 2



° degree

rev revolution

L liter

gallon US gallon


Pa pascal

kPa kilopascal





inH2O (°C) inches of water at 4°C



mA milliampere

V volt

% percent



pH pH




9. Hxxxx Parameters

9.50. HLAI_AIO_BLK_99_0.SENSOR_TYPE


Class Static

Access Read/Write

Related Parameters

Remarks

9.50 HLAI_AIO_BLK_99_0.SENSOR_TYPE


Description Input type

Data Type Uint8

Data Size 1

Range 4-20 mA

0-20 mA

0-5 V

1-5 V

Class Static

Access Read/Write

Related Parameters

Remarks

9.51 HW_REV


Description Hardware revision

Data Type Uint8

Data Size 1

Range

Class Static

9. Hxxxx Parameters

9.51. HW_REV


Access Read Only

Related Parameters

Remarks


10. Ixxxx Parameters

10.1 IDENT_NUMBER (Device Identity)


Description Field device application identity.


Data Size 8

Range

Class Static

Access Read Only

Related Parameters

Remarks

10.2 IO_OPTS (Invert Output)


Description Input/output options.

Data Type BitString

Data Size 2

Range Invert Output Invert the output state

Fault State to Value Use the fault state value

Use Fault State on Restart Use the fault state on restart

Class Static

Access Read/Write

Related Parameters


10.3. ISARXCOUNT (Receive Count)


Remarks

10.3 ISARXCOUNT (Receive Count)


Description Number of messages received from the field device sensor by the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

10.4 ISARXRATE (Receive Rate)


Description Number of messages received per second from the field device sensor by the WDM.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


10.5. ISARXRATEMAX (Receive Rate Max)


10.5 ISARXRATEMAX (Receive Rate Max)


Description High water mark of messages received per second from the field device sensor by the WDM.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

10.6 ISATOCOUNT (Timeout Count)


Description Number of timeouts between the WDM and the field device sensor.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


10.7. ISATORATE (Timeout Rate)


10.7 ISATORATE (Timeout Rate)


Description Number of timeouts per second between the WDM and the field device sensor.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

10.8 ISATORATEMAX (Timeout Rate Max)


Description High water mark of timeouts per second between the WDM and the field device sensor.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


10.9. ISATXCOUNT (Transmit Count)


10.9 ISATXCOUNT (Transmit Count)


Description Number of messages transmitted from the WDM to the field device sensor.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

10.10 ISATXRATE (Transmit Rate)


Description Number of messages per second transmitted from the WDM to the field device sensor.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


10.11. ISATXRATEMAX (Transmit Rate Max)


10.11 ISATXRATEMAX (Transmit Rate Max)


Description High water mark of messages per second transmitted from the WDM to the field device sensor.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

10.12 ITS_VERSION (ITS Version)


Description Field device application ITS version.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks


11. Jxxxx Parameters

11.1 JOIN_ASSIGNMENT (Join Assignment)


Description Field device radio joins assignment.

Data Type Uint8

Data Size 1

Range 1 - Join Disabled

2 - Join Enabled

3 - Follow System Manager Policy

Class Static

Access Read/Write

Related Parameters JOIN_POLICY and JOIN_STATUS

Remarks Battery powered routing device overrides the setting for the system join policy. Line powered routing devices always have their join links enabled, and therefore their join assignment is permanently set to Enabled.

Non-routing devices never have their join links enabled and therefore their join assignment is permanently set to Disabled.

This attribute defaults to Follow System Manager Policy for battery powered routing devices.

11.2 JOIN_ATTEMPT_COUNT


Description Field device radio network join attempt counter.

Data Type Uint16


11.3. JOIN_COMMAND (Join Command)


Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

11.3 JOIN_COMMAND (Join Command)


Description Field device radio join command.

Data Type Uint8

Data Size 1

Range None

Warm Restart

Restart as Provisioned

Class Static

Access Read/Write

Related Parameters

Remarks

11.4 JOIN_POLICY (Default Join Policy)


Description ISA100.11A network join policy.

Data Type Uint8

Data Size 1


11.5. JOIN_STATUS (Join Status)


Range 0 – Join Enabled Line and battery powered routing devices allow devices to join through them.

1 – Join Enabled, Line Powered Only

Only line powered routing devices allow devices to join through them.

Class Dynamic

Access Read/Write

Related Parameters JOIN_ASSIGNMENT and JOIN_STATUS

Remarks The system policy for enabling/disabling join links on battery powered routing devices.

11.5 JOIN_STATUS (Join Status)


Description Field device radio joins status.

Data Type Uint8

Data Size 1

Range 1 - Join Disabled

2 - Join Enabled

Class Static

Access Read Only

Related Parameters JOIN_ASSIGNMENT and JOIN_POLICY

Remarks


11.5. JOIN_STATUS (Join Status)



12. Kxxxx Parameters

12.1 KEY_ROT_PERIOD (Key Rotation Period)


Description ISA100.11A network security key rotation period.

Data Type Uint8

Data Size 1

Range 1 - 8 Hours 8 Hours

2 - 1 Day 1 Day

3 - 1 Week 1 Week

4 - 1 Month 1 Month

5 - Infinite Infinite

Class Dynamic

Access Read/Write

Related Parameters

Remarks

12. Kxxxx Parameters

12.1. KEY_ROT_PERIOD (Key Rotation Period)



13. Lxxxx Parameters

13.1 LAST_RESET_REASON


Description Device last reset reasons.

Data Type Uint8[4]

Data Size 1

Range 0 - Power On Release from Reset

1 - Join Response Timeout

Join Response Timeout

2 - Join Security Conf Timeout

Join Security Confirmation Timeout

3 - Join Contract Error

Join Contract Error

4 - Join Security Conf Error

Join Security Confirmation Error

5 - Time Sync Clock Timeout

Time Sync Clock Timeout

6 - SysMngr Comm Timeout

System Manager Link Communication Timeout

7 - Join Command Reset

Join Command Reset issued from IR or User Interface

8 - AP/Router Role Change

Ethernet link status changed resulting in AP to/from Router Role Change Restart.

9 - Watch Dog Timer Interrupt

Watch Dog Timer Interrupt

10 - NTP Time Sync Unsuccessful

NTP round trip delay exceeds threshold for NTP time synchronization.

11 - Adv Time Unable to establish advertisement


13.1. LAST_RESET_REASON


Sync Unsuccessful time synchronization.

12 - Join Discovery Timeout

Join Discovery Timeout

13 - Unused 13 Unused Reason 13



Class Dynamic

Access Read Only

Related Parameters

Remarks


Description Device last reset reasons.

Data Type Uint8[4]

Data Size 1

Range 0 - Power On Release from Reset

1 - Join Response Timeout

Join Response Timeout

2 - Join Security Conf Timeout

Join Security Confirmation Timeout

3 - Join Contract Error

Join Contract Error

4 - Join Security Conf Error

Join Security Confirmation Error

5 - Time Sync Clock Timeout

Time Sync Clock Timeout


7 - Join Command Reset

Join Command Reset issued from IR or User Interface


13.2. LIC_ACTIVATE



9 - Watch Dog Timer Interrupt

Watch Dog Timer Interrupt

10 - Non-Maskable Interrupt

Non-Maskable Interrupt reset due to flash access violation or oscillator fault

11 - Unexpected Interrupt

Unexpected Interrupt





Class Dynamic

Access Read Only

Related Parameters

Remarks

13.2 LIC_ACTIVATE


Description Activate new license.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read / Write

Related Parameters

Remarks


13.3. LIC_AUTHO_NO_NEW


13.3 LIC_AUTHO_NO_NEW


Description New license authorization number.


Data Size 110

Range

Class Dynamic

Access Read / Write

Related Parameters

Remarks

13.4 LIC_DISP_ORDER


Description License symbol display order (order to display in UI)

Data Type Uint8[10]

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.5 LIC_EXISTS


Description License Exists returns true if license system and authorization number have been configured on WDM.

Data Type Boolean


13.6. LIC_EXISTS_NEW


Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.6 LIC_EXISTS_NEW


Description New License Exists returns true if new license system and authorization number are valid.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.7 LIC_RELEASE


Description Maximum licensed OneWireless release.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only


13.8. LIC_RELEASE_NEW


Related Parameters

Remarks

13.8 LIC_RELEASE_NEW


Description Maximum licensed OneWireless release

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.9 LIC_ SYSTEM_NO_NEW


Description New license system number.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read / Write

Related Parameters

Remarks

13.10 LIC_ VALID_RELEASE



13.11. LIC_ VALID_RELEASE_NEW


Description License Release Valid returns true if license system and authorization number are valid for the currently installed OneWireless release.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.11 LIC_ VALID_RELEASE_NEW


Description License Release Valid returns true if license system and authorization number are valid for the currently installed OneWireless release.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.12 LIC_VALUE


Description License value.

Data Type Int32[10]

Data Size 4


13.13. LIC_VALUE_NEW


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.13 LIC_VALUE_NEW


Description New license value.

Data Type Int32[10]

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

13.14 LIC_VALUE_TYPE


Description License value data type

Data Type Uint8[10]

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


13.15. LICENSED_AP_COUNT


13.15 LICENSED_AP_COUNT


Description Current count of licensed access points.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters LICENSE_STATE, TOTAL_AP_LICENSES, and UNLICENSED_AP_COUNT

Remarks

13.16 LICENSE_STATE


Description Device license state.

Data Type Uint8

Data Size 1

Range Not Applicable

Disabled – Not Licensed

Enabled – Licensed

Class Static

Access Read/Write

Related Parameters LICENSED_AP_COUNT, TOTAL_AP_LICENSES, and UNLICENSED_AP_COUNT.

Remarks The LICENSE_STATE parameter indicates whether or not a FDAP is licensed. In addition, the LICENSE_STATE attribute commands an access point to the licensed or unlicensed state to allow the user to manage which access points should be in active use when there are more access


13.17. LINE_FILTER (Line Filter)


points than the total number purchased in the license.

13.17 LINE_FILTER (Line Filter)


Description Line filter value.

Data Type Uint8

Data Size 1

Range 60 Hz 60 Hz line filter

50 Hz 50 Hz line filter

Class Static

Access Read/Write

Related Parameters

Remarks

13.18 LINK_STRENGTH_THRES


Description Minimum link strength (RSSI) to be considered as a neighbor.

Data Type Int16

Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters LINK_QUAL_THRES

Remarks

13.19 LINK_QUAL_THRES (Link Quality Threshold)


13.20. LONG_TAG



Description Minimum link quality (RSQI) to be considered as a neighbor.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

13.20 LONG_TAG


Description Long tag name of the HART transmitter.


Data Size 32

Range

Class Static

Access Read/Write

Related Parameters

Remarks

13.21 LOOP_CURRENT


Description HART transmitter loop current.

Data Type Float


13.21. LOOP_CURRENT


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


13.21. LOOP_CURRENT



14. Mxxxx Parameters

14.1 MAINTENANCE_ALERT


Description Maintenance alert.


Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

14.2 MAINTENANCE_ALERT.ALERT_DISABLE (Alert Disable)


Description Enable or disable the maintenance alert.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks


14.3. MAINTENANCE_ALERT.ALERT_PRIORITY (Alert Priority)


14.3 MAINTENANCE_ALERT.ALERT_PRIORITY (Alert Priority)


Description Parameter to set the alert priority for the maintenance alert.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

14.4 MAX_OVP (Maximum Over Pressure)


Description Maximum over pressure rating in the selected scale units.

Data Type Float

Data Size 4

Range

Class Constant

Access Read Only

Related Parameters

Remarks

14.5 MAX_ROUTE_DEPTH (Maximum Route Depth)



14.6. MAX_SP (Maximum Static Pressure)


Description Maximum number of hops between the WDM and a field device over the ISA100.11A network.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.6 MAX_SP (Maximum Static Pressure)


Description Maximum static pressure rating in the selected scale units.

Data Type Float

Data Size 4

Range

Class Constant

Access Read Only

Related Parameters

Remarks

14.7 MDBYTEORDER (Byte Order)

Specific to Block(s) WDM MODBUS

Description Modbus byte order for integer and float values.

Data Type Uint16

Data Size 2


14.8. MDCOILADDR


Range Big Endian Return integer and float values in big endian format.

Big Endian Byte Swapped

Little Endian Return integer and float values in little endian format.

Little Endian Byte Swapped

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.8 MDCOILADDR


Description Coil table address.


Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.9 MDCOILHANDLE


Description Coil table attribute handle.



14.10. MDCOILNAME


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.10 MDCOILNAME


Description Coil table attribute name.


Data Size 84

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.11 MDDISCADDR


Description Discrete input table address.


Data Size 2

Range

Class Dynamic


14.12. MDDISCHANDLE


Access Read Only

Related Parameters

Remarks

14.12 MDDISCHANDLE


Description Handle the discrete input table attribute.


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.13 MDDISCNAME


Description Discrete input table attribute name.


Data Size 84

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks


14.14. MDEXCEPTIONCOUNT (Exception)


14.14 MDEXCEPTIONCOUNT (Exception)


Description Number of exceptions.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.15 MDFLOATERR (Float Error Response)


Description Error response value for holding registers and input registers mapped to the floating point attributes.

Data Type Uint16

Data Size 2

Range NaN Return NaN as error response value when reading holding registers and input registers mapped to floating point attributes.

Float Error Value Return configured value as error response value when reading holding registers and input registers mapped to floating point attributes.

Class Dynamic

Access Read/Write

Related Parameters


14.16. MDFLOATERRVAL (Float Error Value)


Remarks

14.16 MDFLOATERRVAL (Float Error Value)


Description Error response value for holding registers and input registers mapped to the floating point attributes.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.17 MDHOLDADDR


Description Holding register table address.


Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


14.18. MDHOLDHANDLE


14.18 MDHOLDHANDLE


Description Holding register table attribute handle.


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.19 MDHOLDNAME


Description Holding register table attribute name.


Data Size 84

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.20 MDINPUTADDR


Description Input register table address.


14.21. MDINPUTHANDLE



Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.21 MDINPUTHANDLE


Description Handle the input register table attribute.


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.22 MDINPUTNAME


Description Input register table attribute name.


Data Size 84

Range

Class Dynamic


14.23. MDINTERFACEENABLE (Interface)


Access Read/Write

Related Parameters

Remarks

14.23 MDINTERFACEENABLE (Interface)


Description Enable Modbus RTU or Modbus TCP interface.

Data Type Uint16

Data Size 2

Range 0 - Disabled Modbus interface disabled.

1 - Modbus RTU Interface

Enable Modbus RTU interface.

2 - Modbus TCP Interface

Enable Modbus TCP interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.24 MDINTERR (Integer Error Response)


Description Error response value for holding registers and input registers mapped to integer attributes.

Data Type Uint16

Data Size 2

Range Zero Return zero as error response value when reading unmapped coils and registers.


14.25. MDINTERRVAL (Integer Error Response Value)


Illegal Data Address Exception

Return illegal data address exception as error response value when reading unmapped coils and registers.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.25 MDINTERRVAL (Integer Error Response Value)


Description Error response value for holding registers and input registers mapped to integer attributes.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.26 MDLICENSED



Data Type Uint8

Data Size 1




14.27. MDREADCOILCOUNT (Read (FC 1))


Class Dynamic

Access Read Only

Related Parameters

Remarks

14.27 MDREADCOILCOUNT (Read (FC 1))


Description Number of Read Coil (FC 1) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.28 MDREADDISCCOUNT (Read (FC 4))


Description Number of Read Discrete Input (FC 2) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


14.29. MDREADHOLDCOUNT (Read (FC 3))


14.29 MDREADHOLDCOUNT (Read (FC 3))


Description Number of Read Holding Register (FC 3) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.30 MDREADINPUTCOUNT (Read (FC 4))


Description Number of Read Input Register (FC 4) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.31 MDRESETSTATS



14.31. MDRESETSTATS


Description Reset Modbus statistics.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks


14.32. MDSERIALBAUDRATE (Baud Rate)


14.32 MDSERIALBAUDRATE (Baud Rate)


Description Modbus RTU serial port baud rate.

Data Type Uint32

Data Size 4

Range 300 Use 300 baud for Modbus RTU interface.

1200 Use 1200 baud for Modbus RTU interface.








Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.33 MDSERIALCRCERRCOUNT (CRC Error Count)


Description Number of CRC errors on the Modbus RTU interface.

Data Type Uint32

Data Size 4


14.34. MDSERIALCRCERRRATE (CRC Error Rate)


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.34 MDSERIALCRCERRRATE (CRC Error Rate)


Description Number of CRC errors per second on the Modbus RTU interface.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.35 MDSERIALCRCERRRATEMAX (CRC Error Rate Max)


Description High water mark of CRC errors per second on the Modbus RTU interface.

Data Type Float

Data Size 4

Range

Class Dynamic


14.36. MDSERIALMSGCOUNT


Access Read Only

Related Parameters

Remarks

14.36 MDSERIALMSGCOUNT


Description Number of messages received from the Modbus RTU clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.37 MDSERIALMSGRATE (Message Rate)


Description Number of messages received per second from the Modbus RTU clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters


14.38. MDSERIALMSGRATEMAX (Message Rate Max)


Remarks

14.38 MDSERIALMSGRATEMAX (Message Rate Max)


Description High water mark of messages received per second from the Modbus RTU clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.39 MDSERIALPARITY (Parity)


Description Modbus RTU serial port parity.

Data Type Uint32

Data Size 4

Range 0 - None Use no parity for Modbus RTU interface.

768 -Odd Use odd parity for Modbus RTU interface.

256-Even Use even parity for Modbus RTU interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks


14.40. MDSERIALPORT (Serial Port)


14.40 MDSERIALPORT (Serial Port)


Description Serial port of the Modbus RTU.

Data Type Uint16

Data Size 2

Range 0 - COM1 Use COM1 for Modbus RTU interface.

1 - COM2 Use COM2 for Modbus RTU interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.41 MDSERIALUNITID (Serial Address)


Description Modbus RTU serial address.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.42 MDTCPCONNCLIENT



14.43. MDTCPMSGCOUNT


Description Number of clients connected to the Modbus TCP interface.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.43 MDTCPMSGCOUNT


Description Number of messages received from the Modbus TCP clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


14.44. MDTCPMSGRATE (Message Rate)


14.44 MDTCPMSGRATE (Message Rate)


Description Number of messages received per second from the Modbus TCP clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.45 MDTCPMSGRATEMAX (Message Rate Max)


Description High water mark of messages received per second from the Modbus TCP clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


14.46. MDTCPPORT (TCP Port)


14.46 MDTCPPORT (TCP Port)


Description Modbus TCP port.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.47 MDTIMEOUTCOUNT (Timeout)


Description Number of timeouts.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.48 MDUNCONFIGREADERR (Read Response)


Description Error response value for read requests of unmapped coils and registers.


14.49. MDUNCONFIGWRITEERR (Write Response)


Data Type Uint16

Data Size 2

Range Zero Return zero as error response value when reading unmapped coils and registers.


Return illegal data address exception as error response value when reading unmapped coils and registers.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

14.49 MDUNCONFIGWRITEERR (Write Response)


Description Error response value for write requests of unmapped coils and registers.

Data Type Uint16

Data Size 2

Range Ignore Ignore when writing unmapped coils and registers.


Return illegal data address exception as error response value when writing unmapped coils and registers.

Class Dynamic

Access Read/Write

Related Parameters

Remarks


14.50. MDWRITECOILCOUNT (Write (FC 5))


14.50 MDWRITECOILCOUNT (Write (FC 5))


Description Number of Write Coil (FC 5) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.51 MDWRITEHOLDCOUNT (Write (FC 16))


Description Number of Write Holding Register (FC 16) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.52 MDWRITEMULTICOILCOUNT


Description Write Multiple (FC 15)


14.53. MEMFREE (Free)


Number of Write Multiple Coil (FC 15) requests received.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.53 MEMFREE (Free)


Description Unused RAM in the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.54 MEMTOTAL (Total)


Description Total RAM installed on the WDM.

Data Type Uint32

Data Size 4

Range


14.55. MODBUS.MDLICENSED


Class Dynamic

Access Read Only

Related Parameters

Remarks

14.55 MODBUS.MDLICENSED



Data Type Uint8

Data Size 4




Class Dynamic

Access Read Only

Related Parameters

Remarks

14.56 MODE

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (DO, DI, CurrAI, and TempAI channels), Multi AI DI (DI, CurrAI, and TempAI channels), Pressure (AI channel), Temperature DI (DI and TempAI channels), OWA (HART AIO)


Data Type Mode

Data Size 4

Range


14.57. MODE.ACTUAL (Actual/Target)


Class Static

Access Read/Write

Related Parameters

Remarks

14.57 MODE.ACTUAL (Actual/Target)

Specific to Block(s) Corrosion (AI channel), Multi AI DI DO (DI, CurrAI, and TempAI channels), Multi AI DI (DI, CurrAI, and TempAI channels), Temperature DI (DI and TempAI channels), Pressure (AI channel), HLAI (AI channel)


Data Type Uint8

Data Size 1


Auto Automatic mode

Class Static

Access Read Only

Related Parameters

Remarks

Specific to Block(s) Multi AI DI DO (DO channel), OWA (HART AIO)


Data Type Uint8

Data Size 1


Man Manual mode

Auto Automatic mode


14.58. MODE.NORMAL (Normal)


Class Static

Access Read Only

Related Parameters

Remarks

14.58 MODE.NORMAL (Normal)

Specific to Block(s) Corrosion (AI channels), Multi AI DI DO (DI, CurrAI, and TempAI channels), Multi AI DI (DI, CurrAI, and TempAI channels), Temperature DI (DI and TempAI channels), Pressure (AI channel), HLAI (AI channel)


Data Type Uint8

Data Size 1


Auto Automatic mode

Class Static

Access Read/Write

Related Parameters

Remarks



Data Type Uint8

Data Size 1


Man Manual mode

Auto Automatic mode


14.59. MODE.PERMITTED (Permitted)


Class Static

Access Read/Write

Related Parameters

Remarks

14.59 MODE.PERMITTED (Permitted)

Specific to Block(s) Corrosion (AI channel), Multi AI DI DO (DI, CurrAI, and TempAI channels), Multi AI DI (DI, CurrAI, and TempAI channels), Temperature DI (DI and TempAI channels), Pressure (AI channel), HLAI (AI channel)


Data Type BitString

Data Size 1



Class Static

Access Read/Write

Related Parameters

Remarks



Data Type BitString

Data Size 1


Man Manual mode as the permitted mode



14.60. MODE.TARGET


Class Static

Access Read/Write

Related Parameters

Remarks

14.60 MODE.TARGET

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (DI, CurrAI, and TempAI channels), Multi AI DI (DI, CurrAI, and TempAI channels), Pressure (AI channel), Temperature DI (DI and TempAI channels)


Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Class Static

Access Read/Write

Related Parameters

Remarks



Data Type Uint8

Data Size 1

Range Normal Normal mode



14.61. MODEL (Model)


Man Manual mode

Auto Automatic mode

Class Static

Access Read/Write

Related Parameters

Remarks

14.61 MODEL (Model)


Description WDM model identification string.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

14.62 MODEL_ID


Description Field device radio model ID.


Data Size 16

Range

Class Constant


14.62. MODEL_ID


Access Read Only

Related Parameters

Remarks


14.62. MODEL_ID



15. Nxxxx Parameters

15.1 NETWORK_ADDRESS_128_BIT


Description Field device radio IP6 address.


Data Size 0

Range

Class Static

Access Read Only

Related Parameters

Remarks

15.2 NTP_CLOCK_DRIFT (Time Sync Drift)


Description Access point NTP time sync drift.

Data Type Int32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks This attribute applies only to Access Point devices. It indicates the difference in time between the access point and the NTP clock source. This attribute is only read for provisioned FDAPs, and it is read periodically after FDAP


15.3. NTP_DISPERSION (Dispersion)


join.

15.3 NTP_DISPERSION (Dispersion)


Description Dispersion in msec.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.4 NTP_FLASH (Flash error status)


Description Flash status word.

Data Type Uint16

Data Size 2

Range 1 - Duplicate Packet Duplication packet.

2 - Bogus Packet Bogus packet.

4 - Unsynchronized Server not synchronized.

8 - Access Denied Access denied.

16 - Authentication Failure

Authentication failure.

32 - Invalid Stratum Invalid leap or stratum.

64 - Header Distance Exceeded

Header distance exceeded.


15.5. NTP_FREQ (Mean frequency offset)


128 - Autokey Error Autokey sequence error.

256 - Crypto Error Autokey protocol error.

512 - Invalid Peer Stratum

Invalid header or stratum.

1024 - Peer Distance Exceeded

Peer distance threshold exceeded.

2048 - Synchronization Loop

Synchronization loop.

4096 - Peer Unreachable

Unreachable or nonselect.

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.5 NTP_FREQ (Mean frequency offset)


Description Mean frequency offset in ppm.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.6 NTP_LEAP_STS (Leap indicator)


15.7. NTP_OFFSET (Mean offset)



Description NTP leap second indicator.

Data Type Uint16

Data Size 2

Range 0 - None No warning.

16384 - Leap add sec

Insert second after 23:59:59 of the current day.

32768 - Leap del sec

Delete second 23:59:59 of the current day.

49152 - Unknown Unknown (Clock unsynchronized).

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.7 NTP_OFFSET (Mean offset)


Description Mean time offset in msec.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.8 NTP_PEER_EVENT


15.8. NTP_PEER_EVENT



Description Last peer event.

Data Type Uint16

Data Size 2

Range 0 - Unspecified Unspecified.

1 - Mobilize Association mobilized.

2 - Demobilize Association demobilized.

3 - Unreachable Discarded by cluster algorithm.

4 - Reachable Server reachable.

5 - Restart Association restart.

6 - NoReply No server found.

7 - RateExceeded Rate exceeded.

8 - AccessDenied Access denied.

9 - LeapArmed Leap armed from server LI code.

10 - SysPeer Become system peer.

11 - ClockEvent See clock status word.

12 - BadAuth Authentication failure.

13 - Popcorn Popcorn spike suppressor.

14 - InterleaveMode Entering interleave mode.

15 - InterleaveError Interleave error.

16 - Tai leapsecond values update from server.

Class Dynamic

Access Read Only

Related Parameters

Remarks


15.9. NTP_PEER_SRC (Peer address)


15.9 NTP_PEER_SRC (Peer address)


Description Source address of NTP peer association.


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.10 NTP_PEER_STS (Peer association status)


Description NTP peer status.

Data Type Uint16

Data Size 2

Range 2048 - Broadcast association

Broadcast association.

4096 - Host Reachable

Host reachable.

8192 - Authentication Enabled

Authentication enabled.

16384 - Authentication OK

Authentication OK.

32768 - Persistent Association

Persistent association.

Class Dynamic


15.11. NTP_ROOT_DISPERSION (Root Dispersion)


Access Read Only

Related Parameters

Remarks

15.11 NTP_ROOT_DISPERSION (Root Dispersion)


Description Root dispersion in msec.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.12 NTP_ROUND_TRIP (Round Trip Time)


Description Access point NTP round trip time.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks This attribute applies only to Access Point devices. It indicates the round trip time it takes to get an update from the NTP server. It is read periodically after access point


15.13. NTP_SELECT_STS (Last event)


join.

15.13 NTP_SELECT_STS (Last event)


Description NTP peer selection status.

Data Type Uint16

Data Size 2

Range 0 - Reject Discarded as not valid.

256 - FalseTick Discarded by intersection algorithm.

512 - Excess Discarded by table overflow.

768 - Outlyer Discarded by cluster algorithm.

1024 - Candidate Included by combine algorithm.

1280 - Backup Backup.

1536 - SysPeer System peer.

1792 - PpsPeer PPS peer.

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.14 NTP_SOURCE (Sync source)


Description Current clock synchronization source.

Data Type Uint16

Data Size 2


15.15. NTP_SYNC_CAPABLE (Time Master Preferred)


Range 0 - Unsynchronized Not yet synchronized.

256 - PPS signal PPS signal.

512 - LF radio LF radio.

768 - HF radio HF radio.

1024 - UHF radio UHF radio.

1280 - Local Local timecode.

1536 - NTP NTP.

1792 - Other Other source.

2048 - Eyeball wristwatch

Eyeball and wristwatch.

2304 - Telephone Telephone modem.

Class Dynamic

Access Read Only

Related Parameters

Remarks

15.15 NTP_SYNC_CAPABLE (Time Master Preferred)


Description When true the access point is preferred to be the time master.

Data Type Uint32

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters


15.16. NTP_SYS_EVENT (Last system event)


Remarks This attribute applies only to Access Point devices.

15.16 NTP_SYS_EVENT (Last system event)


Description Last system event.

Data Type Uint16

Data Size 2

Range 0 - Unspecified Unspecified.

1 - FreqNotSet Frequency file not available.

2 - FreqSet Frequency set from frequency file.

3 - SpikeDetect Spike detected.

4 - FreqMode Initial frequency training mode.

5 - ClockSync Clock synchronized.

6 - Restart Program restart.

7 - PanicStop Clock error more than 600 s.

8 - NoSysPeer No system peer.

9 - LeapArmed Leap second armed from file or Autokey.

10 - LeapDisarmed Leap second disarmed.

11 - LeapEvent Leap event.

12 - ClockStep Clock stepped.

13 - KernelMsg Kernel information message.

14 - Tai Leapsecond values update from file.

15 - StaleLeapVal New NIST leapseconds file needed.

Class Dynamic


15.17. NUM_ELECTRONS (Number of Electrons)


Access Read Only

Related Parameters

Remarks

15.17 NUM_ELECTRONS (Number of Electrons)


Description Number of electrons in the electrode material.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

15.18 NUMACTDEV


Description Number of devices exposed on the CDA interface.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


15.18. NUMACTDEV



16. Oxxxx Parameters

16.1 OP_B




Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

16.2 OPC.OPCLICENSED



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks


16.3. OPCINTERFACEENABLE (Interface)


16.3 OPCINTERFACEENABLE (Interface)

Specific to Block(s) WDM OPC

Description Enable OPC interface.

Data Type Uint16

Data Size 2

Range 0 - Disabled OPC interface is disabled.

1 – Enabled Enable OPC interface.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

16.4 OPCLICENSED



Data Type Uint8

Data Size 1



Class Dynamic

Access Read Only

Related Parameters

Remarks

16.5 OPCMSGCOUNT



16.6. OPCMSGRATE (Message Rate)


Description Number of messages received from the OPC clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

16.6 OPCMSGRATE (Message Rate)


Description Number of messages received per second from the OPC clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

16.7 OPCMSGRATEMAX (Message Rate Max)


Description High water mark of messages received per second from the OPC clients.

Data Type Float


16.8. OPCRESETSTATS


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

16.8 OPCRESETSTATS


Description Reset OPC interface statistics.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

16.9 OPCSUBCOUNT


Description Number of subscriptions from the OPC clients.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only


16.10. OPCSUBRATE (Subscription Rate)


Related Parameters

Remarks

16.10 OPCSUBRATE (Subscription Rate)


Description Number of subscriptions per second from the OPC clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

16.11 OPCSUBRATEMAX (Subscription Rate Max)


Description High water mark of subscriptions per second from the OPC clients.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


16.12. OTA_PROVISION (Over the Air Provisioning)


16.12 OTA_PROVISION (Over the Air Provisioning)


Description Enable over-the-air provisioning for ISA100.11a network.

Data Type Uint8

Data Size 1

Range 0 - Disabled Disable over-the-air provisioning

1 – Enabled Enable over-the-air provisioning

Class Dynamic

Access Read/Write

Related Parameters

Remarks

16.13 OUT_OF_SPEC_ALERT


Description Out of specification alert


Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

16.14 OUT_OF_SPEC_ALERT.ALERT_DISABLE (Alert Disable)


16.15. OUT_OF_SPEC_ALERT.ALERT_PRIORITY (Alert Priority)



Description Enable or disable the out of specification alert.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

16.15 OUT_OF_SPEC_ALERT.ALERT_PRIORITY (Alert Priority)


Description Set the priority for the out of specification alert.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks


17. Pxxxx Parameters

17.1 PF


Description Localized corrosion indicator.


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.2 PF.STATUS (Status)



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters


17.3. PF.VALUE (Value)


Remarks

17.3 PF.VALUE (Value)



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.4 PLAT_ALERTS


Description Platform Alerts

Data Type Uint8

Data Size 1

Range 0 - Platform Event 00

1 - NTP Frequency error (NTP frequency error.)

2 - NTP Server Unreachable or Rejected (NTP server not reachable or rejected.)

3 - WDM App Restart (WDM app restarted.)

4 - Demonstration License (WDM is using a demonstration-only license.)

5 - Platform Event 05


17.5. POWER_SOURCE (Power Source)
















266 - Attribute write (Attribute value changed by user)

Class Static

Access Read/Write

Related Parameters

Remarks

17.5 POWER_SOURCE (Power Source)

Specific to Block(s) Corrosion, Pressure, Multi AI DI DO, Multi AI DI, Temperature DI, HLAI, OWA, EnrafFlexLine

Description Power source for the device.

Data Type Uint8

Data Size 1


17.6. POWER_SUPPLY_STATUS (Power Supply Status)


Range Battery Module Device is powered by internal battery.

24 V External Power Module

Device is powered using 24 V external power.

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.6 POWER_SUPPLY_STATUS (Power Supply Status)


Description Field device power supply status.

Data Type Uint8

Data Size 1

Range Line Powered Line powered

Battery, High Battery powered - greater than 75% remaining

Battery, Medium Battery powered - between 25% to 75% remaining

Battery, Low Battery powered - less than 25% remaining

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.7 Pressure_AIO_BLK_99_0.CAL_CMD


17.8. Pressure_AIO_BLK_99_0.CAL_POINT_HI




Data Type Uint8

Data Size 1

Range None No value



Cal Zero Calibrate for zero



Class Dynamic

Access Read/Write

Related Parameters

Remarks

17.8 Pressure_AIO_BLK_99_0.CAL_POINT_HI


Description Calibration point high value.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks


17.9. Pressure_AIO_BLK_99_0.CAL_POINT_LO


17.9 Pressure_AIO_BLK_99_0.CAL_POINT_LO


Description Calibration point low value.

Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.10 Pressure_AIO_BLK_99_0.CAL_SOURCE



Data Type Uint8

Data Size 1




Class Dynamic

Access Read Only

Related Parameters

Remarks

17.11 Pressure_AIO_BLK_99_0.CAL_STATUS


17.12. Pressure_AIO_BLK_99_0.CAL_UNIT



Description Calibration status.

Data Type Uint8

Data Size 1

Range None No value






Bad Units Bad units




Class Dynamic

Access Read Only

Related Parameters

Remarks

17.12 Pressure_AIO_BLK_99_0.CAL_UNIT


Description Units of the calibration point values.

Data Type Uint16

Data Size 2

Range Pa pascal

GPa gigapascal


17.12. Pressure_AIO_BLK_99_0.CAL_UNIT


MPa megapascal

kPa kilopascal

mPa millipascal

µPa micropascal

hPa hectopascal

bar bar

mbar millibar

torr torr

atm atmospheres







inH2O (4 °C) inches of water at 4 °C

inH2O (68 °F) inches of water at 68 °F

mmH2O millimeters of water

mmH2O (4 °C) millimeters of water at 4 °C

mmH2O (68 °F)

millimeters of water at 68 °F

ftH2O feet of water

ftH2O (4 °C) feet of water at 4°C

ftH2O (68 °F) feet of water at 68 °F

inHg inches of mercury

inHg (0 °C) inches of mercury at 0 °C


17.13. Pressure_AIO_BLK_99_0.MAX_OVP




% percent

Class Static

Access Read/Write

Related Parameters

Remarks

17.13 Pressure_AIO_BLK_99_0.MAX_OVP


Description Maximum over pressure rating in the selected scale units.

Data Type Float

Data Size 4

Range

Class Constant

Access Read Only

Related Parameters

Remarks

17.14 Pressure_AIO_BLK_99_0.MAX_SP


Description Maximum static pressure rating in the selected scale units.

Data Type Float

Data Size 4

Range


17.15. Pressure_AIO_BLK_99_0.MODE


Class Constant

Access Read Only

Related Parameters

Remarks

17.15 Pressure_AIO_BLK_99_0.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.16 Pressure_AIO_BLK_99_0.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only


17.17. Pressure_AIO_BLK_99_0.MODE.NORMAL


Related Parameters

Remarks

17.17 Pressure_AIO_BLK_99_0.MODE.NORMAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

17.18 Pressure_AIO_BLK_99_0.MODE.PERMITTED



Data Type BitString

Data Size 1



Man Manual

Class Static


17.19. Pressure_AIO_BLK_99_0.MODE.TARGET


Access Read/Write

Related Parameters

Remarks

17.19 Pressure_AIO_BLK_99_0.MODE.TARGET



Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

17.20 Pressure_AIO_BLK_99_0.PV




Data Size 5

Range

Class Dynamic

Access Read Only


17.21. Pressure_AIO_BLK_99_0.PV.STATUS


Related Parameters

Remarks

17.21 Pressure_AIO_BLK_99_0.PV.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.22 Pressure_AIO_BLK_99_0.PV.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


17.23. Pressure_AIO_BLK_99_0.SCALE


17.23 Pressure_AIO_BLK_99_0.SCALE



Data Type Scaling

Data Size 11

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.24 Pressure_AIO_BLK_99_0.SCALE.DECIMAL



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.25 Pressure_AIO_BLK_99_0.SCALE.EU_0




17.26. Pressure_AIO_BLK_99_0.SCALE.EU_100


Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.26 Pressure_AIO_BLK_99_0.SCALE.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.27 Pressure_AIO_BLK_99_0.SCALE.UNITS_INDEX



Data Type Uint16

Data Size 2

Range Pa pascal


17.27. Pressure_AIO_BLK_99_0.SCALE.UNITS_INDEX


GPa gigapascal

MPa megapascal

kPa kilopascal

mPa millipascal

µPa micropascal

hPa hectopascal

bar bar

mbar millibar

torr torr

atm atmospheres












ftH2O feet of water

ftH2O (4°C) feet of water at 4°C

ftH2O (68°F) feet of water at 68 °F




17.27. Pressure_AIO_BLK_99_0.SCALE.UNITS_INDEX




% percent

m ³/s cubic meter per second

m ³/min cubic meter per minute

m ³/h cubic meter per hour

m ³/d cubic meter per day

L/s liter per second


L/h liter per hour

L/d liter per day

ML/d megaliter per day

CFS cubic feet per second

CFM cubic feet per minute

CFH cubic feet per hour

Ft ³/d cubic feet per day

SCFM standard cubic feet per minute

SCFH standard cubic feet per hour

gal/s US gallon per second


gal/h US gallon per hour

gal/d US gallon per day

Mgal/d mega US gallon per day

ImpGal/s Imperial gallon per second

ImpGal/min Imperial gallon per minute

ImpGal/h Imperial gallon per hour


17.28. Pressure_AIO_BLK_99_0.SENSOR_RANGE


ImpGal/d Imperial gallon per day

Barg bar gauge

mBarg millibar gauge

Class Static

Access Read/Write

Related Parameters

Remarks

17.28 Pressure_AIO_BLK_99_0.SENSOR_RANGE


Description Upper and lower range limits of sensor expressed in units chosen in Scale unit index.

Data Type Scaling

Data Size 11

Range

Class Constant

Access Read Only

Related Parameters

Remarks

17.29 Pressure_AIO_BLK_99_0.SENSOR_RANGE.DECIMAL


Description The number of digits to the right of the decimal point which must be used by an interface device in displaying the specified parameter.

Data Type Uint8

Data Size 1


17.30. Pressure_AIO_BLK_99_0.SENSOR_RANGE.EU0


Range

Class Constant

Access Read Only

Related Parameters

Remarks

17.30 Pressure_AIO_BLK_99_0.SENSOR_RANGE.EU0


Description The engineering unit value which represents the lower end of range of the associated block parameter.

Data Type Float

Data Size 4

Range

Class Constant

Access Read Only

Related Parameters

Remarks

17.31 Pressure_AIO_BLK_99_0.SENSOR_RANGE.EU100


Description The engineering unit value which represents the upper end of range of the associated block parameter.

Data Type Float

Data Size 4

Range

Class Constant


17.32. Pressure_AIO_BLK_99_0.SENSOR_RANGE.UNITS_INDEX


Access Read Only

Related Parameters

Remarks

17.32 Pressure_AIO_BLK_99_0.SENSOR_RANGE.UNITS_INDEX



Data Type Uint16

Data Size 2

Range Pa pascal

GPa gigapascal

MPa Megapascal

kPa Kilopascal

mPa millipascal

µPa micropascal

hPa hectopascal

bar Bar

mbar Millibar

torr torr

atm atmospheres

psi Pounds per square inch

psia Pounds per square inch absolute

psig Pounds per square inch gauge

g/cm² Gram per square centimeter


17.33. Pressure_AIO_BLK_99_0.SENSOR_TEMP


kg/cm² Kilogram per square centimeter


inH2O (4°C) Inches of water at 4°C

inH2O (68°F) Inches of water at 68°F


mmH2O (4°C) Millimeters of water at 4°C

mmH2O (68°F) Millimeters of water at 68°F

ftH2O feet of water

ftH2O (4 °C) feet of water at 4°C

ftH2O (68 °F) feet of water at 68 °F


inHg (0 °C) inches of mercury at 0 °C



% percent

Class Constant

Access Read Only

Related Parameters

Remarks

17.33 Pressure_AIO_BLK_99_0.SENSOR_TEMP


Description Describes the sensor temperature value.


Data Size 5

Range


17.34. Pressure_AIO_BLK_99_0.SENSOR_TEMP.TEMP_VAL


Class Dynamic

Access Read Only

Related Parameters

Remarks

17.34 Pressure_AIO_BLK_99_0.SENSOR_TEMP.TEMP_VAL



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.35 Pressure_AIO_BLK_99_0.SENSOR_TEMP.TEMP_VAL_STAT



Data Type Uint8

Data Size 1

Range


17.36. Pressure_AIO_BLK_99_0.TEMP_UNIT


Class Dynamic

Access Read Only

Related Parameters

Remarks

17.36 Pressure_AIO_BLK_99_0.TEMP_UNIT


Description Units of temperature.

Data Type Uint16

Data Size 2



Class Static

Access Read/Write

Related Parameters

Remarks

17.37 PROV_DEV_DISABLE

Specific to Block(s) Corrosion, FDAP, HLAI, Multi AI DI DO, Multi AI DI, Pressure, Temperature DI, OWA

Description Disable over-the-air provisioning through this field device radio.

Data Type Boolean

Data Size 1

Range

Class Static


17.38. PROV_DEV_ENABLE


Access Read/Write

Related Parameters

Remarks

17.38 PROV_DEV_ENABLE


Description Enable over-the-air provisioning through this field device radio for 60 minutes.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

17.39 PROV_DEV_TIME (Time Remaining)


Description Time remaining for over-the-air provisioning through this field device radio.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only


17.40. PV


Related Parameters

Remarks

17.40 PV

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (TempAI and CurrAI channels), Multi AI DI (CurrAI and TempAI channels), Pressure (AI channel), Temperature DI (TempAI channel), OWA (HART AIO)



Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.41 PV_ALARM_SELECT


Description PV alarm select.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks


17.42. PV_B


17.42 PV_B

Specific to Block(s) Multi AI DI DO (DI channel), Multi AI DI (DI channel), Temperature DI (DI channel)



Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

17.43 PV_DAMPING


Description PV damping.

Data Type Float

Data Size 4

Range

Class Static

Access Read Only

Related Parameters

Remarks

17.44 PV_FLAGS


Description PV flags.


17.45. PV_LOWER_RANGE


Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

17.45 PV_LOWER_RANGE


Description PV lower range.

Data Type Float

Data Size 4

Range

Class Static

Access Read Only

Related Parameters

Remarks

17.46 PV_RANGE_UNITS


Description PV range units

Data Type Uint8

Data Size 1

Range


17.47. PV_TRANSFER_FUNCTION


Class Static

Access Read Only

Related Parameters

Remarks

17.47 PV_TRANSFER_FUNCTION


Description PV transfer function.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

17.48 PV_UNIT


Description PV unit code.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks


17.49. PV_UPPER_RANGE


17.49 PV_UPPER_RANGE


Description PV upper range.

Data Type Float

Data Size 4

Range

Class Static

Access Read Only

Related Parameters

Remarks

17.50 PV_VAL


Description PV value.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


18. Qxxxx parameters

18.1 QV_UNIT


Description QV unit code.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

18.2 QV_VAL


Description QV value.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

18. Qxxxx parameters

18.2. QV_VAL



19. Rxxxx Parameters

19.1 RADIO_DIAGNOSTICS (Radio Diagnostics)

Specific to Block(s) HLAI, Temperature DI, Multi AI DI, Pressure, Multi AI DI DO, EnrafFlexLine

Description Field device radio diagnostics.

Data Type Uint8

Data Size 1

Range 16 - Radio Comm Fail

Radio Comm Fail

8 - Time Sync Redundancy Fail

Time Sync Redundancy Fail

4 - Sensor Comm Fail

Sensor Comm Fail

2 - EEPROM Fail EEPROM Fail

Class Constant

Access Read Only

Related Parameters

Remarks

19.2 RDN_ALERTS


Description Redundancy Alerts

Data Type Uint8

Data Size 1

Range 0 - Redundancy Event 00

1 - Not Synchronized (Not synchronized.)


19.2. RDN_ALERTS


2 - Switchover (Switchover.)

3 - Redun Partner Visible on Redun Link (Redundant partner is visible on redundancy private path.)

4 - Redun Sync In Progress (Synchronization in progress.)

5 - Redun Sync Maintenance (Synchronization complete.)

6 - Redun Non-Redundant (Non-Redundant.)

7 - Redun No Partner (Redudnant, no partner connected on redundancy private path.)

8 - Redun Incompatible Partner (Redundant, incompatible partner connected on redundancy private path.)

9 - Unexpected Partner on Redundancy Link (Redudnant, unexpected partner connected on redundancy private path.)

10 - Redundancy Link Inactive (Redundancy private path inactive.)

11 - Redundancy Link Active (Redundancy private path active.)

12 - Sync HW Failure (Synchronization hardware failure.)

13 - Redun Partner Visible on PCN (Redundant partner visible on process control network.)

14 - Redun Partner Visible on FDN (Redundant partner visible on field device network.)

15 - Redun Physical ID A (Redundancy unique physical ID A.)

16 - Redun Physical ID B (Redundancy unique physical ID B.)

17 - Redun No Partner on PCN (Redundant partner not visible on process control network.)

18 - Redun No Partner on FDN (Redundant partner not visible on field device network.)

19 - FDN Cable Disconnected (FDN Cable Disconnected.)

20 - PCN Cable Disconnected (FDN Cable Disconnected.)


19.3. RDNISTIMEMAX (Initial Sync Time Max)


21 - Redundancy Event 21




266 - Attribute write (Attribute value changed by user)

Class Static

Access Read Only

Related Parameters

Remarks

19.3 RDNISTIMEMAX (Initial Sync Time Max)


Description High water mark of time to complete the initial synchronization.

Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.4 RDNRXCOUNT (Rx Count)


Description Number of messages received from the redundant partner.

Data Type Uint32


19.5. RDNRXRATE (Rx Rate)


Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.5 RDNRXRATE (Rx Rate)


Description Number of messages per second received from the redundant partner.

Data Type Float

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.6 RDNRXRATEMAX (Rx Rate Max)


Description High water mark of messages per second received from the redundant partner.

Data Type Float

Data Size 4

Default


19.7. RDNSOTIMEMAX (Switchover Time Max)


Class Dynamic

Access Read Only

Related Parameters

Remarks

19.7 RDNSOTIMEMAX (Switchover Time Max)


Description High water mark of time to switchover.

Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.8 RDNTXCOUNT (Tx Count)


Description Number of messages transmitted to the redundant partner.

Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters


19.9. RDNTXRATE (Tx Rate)


Remarks

19.9 RDNTXRATE (Tx Rate)


Description Number of messages per second transmitted to the redundant partner.

Data Type Float

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.10 RDNTXRATEMAX (Tx Rate Max)


Description High water mark of messages per second transmitted to the redundant partner.

Data Type Float

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks


19.11. READBACK_B


19.11 READBACK_B




Data Size 2

Default

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.12 READREQCNT (Request)


Description Field device radio DMAP read requests.

Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters READRESCNT, READTMOCNT, and RESET_COUNTERS


19.13 READRESCNT (Response)


Description Field device radio DMAP read responses.


19.14. READTMOCNT (Timeout)


Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters READREQCNT, READTMOCNT, and RESET_COUNTERS


19.14 READTMOCNT (Timeout)


Description Field device radio DMAP read timeouts.

Data Type Uint32

Data Size 4

Default

Class Dynamic

Access Read Only

Related Parameters READREQCNT, READRESCNT, and RESET_COUNTERS


19.15 RESET_ALL_COUNTERS


Description Reset radio counters on all field devices command.

Data Type Boolean

Data Size 1

Range


19.16. RESET_BATTERY_ESTIMATES


Class Static

Access Read/Write

Related Parameters DROP_OFF_COUNT

JOIN_ATTEMPT_COUNT (not visible on property panel)

READREQCNT

READRESCNT

READTMOCNT

WRITEREQCNT

WRITERESCNT

WRITETMOCNT

EXECREQCNT

EXECRESCNT

EXECTMOCNT

COMMREDUNRATIO

DLMO_NEIGHBOR_DIAG.RX_DPDU

DLMO_NEIGHBOR_DIAG.TX_SUCCESS

DLMO_NEIGHBOR_DIAG.TX_FAILED

DLMO_NEIGHBOR_DIAG.TX_BACKOFF

DLMO_NEIGHBOR_DIAG.TX_NACK

DLMO_NEIGHBOR_DIAG.RX_DPDU

DLMO_NEIGHBOR_DIAG.TX_SUCCESS

Remarks The default value is false. The WDM iterates through all the devices in its database and reset all of the above related parameters for each device. Note that these are all WDM resident parameters which means no writes are generated to the physical devices.

19.16 RESET_BATTERY_ESTIMATES


19.17. RESET_COUNTERS



Note: This attribute also applies to Corrosion and OWA devices (that is, all devices with Honeywell Radio boards).

Description Reset Battery Estimates. This attribute needs to be executed only when new batteries are installed in the device.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters BATTERY_PERCENT and BATTERY_YEARS_LEFT

Remarks This attribute only applies to Honeywell Field Devices.

19.17 RESET_COUNTERS


Description Field device radio reset counters command.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters COMMREDUNRATIO, EXECREQCNT, EXECRESCNT, EXECTMOCNT,READREQCNT, READRESCNT, READTMOCNT, WRITEREQCNT, WRITERESCNT, and WRITETMOCNT

Remarks This attribute affects the DMAP read/write/execute counters, the communication redundancy ratio, and the


19.18. RESET_WDM


neighbor diagnostic TX/RX counts on all connections for the specified device.

19.18 RESET_WDM


Description Warm restart WDM command.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

19.19 RESETSTATS (Reset Statistics)


Description Reset statistics.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

19.20 RESTART_COUNT (Restart Count)


19.21. RESTART_WDM



Description Field device radio restart counter.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

19.21 RESTART_WDM


Description Restart WDM command.

Data Type Uint8

Data Size 1

Range 0 - None No command issued.

1 - Warm Restart WDM performs a retention restart.

2 - Cold Restart WDM restarts to factory default values.

Class Dynamic

Access Read/Write

Related Parameters

Remarks

19.22 REVISION (Revision)


19.23. ROUTING_ASSIGNMENT (Routing Assignment)



Description WDM revision identification string.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

19.23 ROUTING_ASSIGNMENT (Routing Assignment)


Description Field device radio network routing assignment.

Data Type Uint8

Data Size 1

Range Routing Disabled

Routing Enabled

Not Applicable

Routing Only

Class Static

Access Read/Write

Related Parameters

Remarks The Routing Only setting configures a line-powered field device that supports Router + I/O as a Router with no I/O.


19.24. ROUTING_POLICY (Default Routing Policy)


19.24 ROUTING_POLICY (Default Routing Policy)


Description Enable ISA100.11A network field routing.

Data Type Uint8

Data Size 1

Range Routing Enabled ISA100.11A network field routing is enabled for line powered and battery powered devices.

Routing Enabled, Line Powered Only

ISA100.11A network field routing is enabled for line powered devices.

Routing Disabled ISA100.11A network field routing is disabled.

Class Dynamic

Access Read/Write

Related Parameters

Remarks


19.24. ROUTING_POLICY (Default Routing Policy)



20. Sxxxx Parameters

20.1 SAMPLE_TIME (Sample Time)


Description Data sampling frequency.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

20.2 SCALE

Specific to Block(s) Corrosion (AI channel), HLAI (AI channel), Multi AI DI DO (CurrAI and TempAI channels), Multi AI DI (CurrAI and TempAI channels), Pressure (AI channel), Temperature DI (TempAI channel), OWA (HART AIO)


Data Type Scaling

Data Size 11

Range

Class Static

Access Read/Write

Related Parameters

Remarks


20.3. SCALE.DECIMAL (Decimal)


20.3 SCALE.DECIMAL (Decimal)



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

20.4 SCALE.EU_0 (EU at 0%)



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks


20.5. SCALE.EU_100 (EU at 100%)


20.5 SCALE.EU_100 (EU at 100%)



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

20.6 SCALE.UNITS_INDEX (Units Index)



Data Type Uint16

Data Size 2



Ohm Ohm

mV millivolt

Class Static

Access Read/Write

Related Parameters

Remarks


20.6. SCALE.UNITS_INDEX (Units Index)




Data Type Uint16

Data Size 2

Range 1682 - mils/year mils per year

1683 - mm/year millimeters per year

Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Multi AI DI DO (TempAI channel)


Data Type Uint16

Data Size 2



mV millivolt

µOhm microOhm

Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Multi AI DI (TempAI channel)





Data Type Uint16

Data Size 2



mV millivolt

Ohm Ohm

µOhm microOhm

Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) HLAI (AI channel), Multi AI DI DO (CurrAI channel), Multi AI DI (CurrAI channel)


Data Type Uint16

Data Size 2



° degree

rev revolution

L liter

gallon US gallon


Pa pascal

kPa kilopascal








inH2O (°C) inches of water at 4°C



mA milliampere

V volt

% percent



pH pH




Class Static

Access Read/Write

Related Parameters

Remarks



Data Type Uint16

Data Size 2

Range °F degree Fahrenheit




MPa megapascal

kPa kilopascal

bar bar

mbar millibar












% percent

Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) OWA (HART AIO)


Data Type Uint16

Data Size 2

Range Refer remarks.


20.7. SENSOR_BUILD (Software Version)


Class Static

Access Read/Write

Related Parameters

Remarks The OWA supports all the HART device types and hence the list of supported units of measurement comprises of the units supported by all the device types.

20.7 SENSOR_BUILD (Software Version)


Description Software version.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

20.8 SENSOR_DEVREV (Device Revision)


Description Device revision

Data Type Uint16

Data Size 2

Range

Class Static


20.9. SENSOR_RANGE


Access Read Only

Related Parameters

Remarks

20.9 SENSOR_RANGE


Description Upper and lower range limits of sensor expressed in units chosen in SCALE unit index

Data Type Scaling

Data Size 11

Range

Class Constant

Access Read Only

Related Parameters

Remarks

20.10 SENSOR_RANGE.DECIMAL (Decimal)


Description The number of digits to the right of the decimal point which must be used by an interface device in displaying the specified parameter.

Data Type Uint8

Data Size 1

Range

Class Constant

Access Read Only

Related Parameters


20.11. SENSOR_RANGE.EU0 (EU at 0%)


Remarks

20.11 SENSOR_RANGE.EU0 (EU at 0%)


Description The engineering unit value which represents the lower end of range of the associated block parameter.

Data Type Float

Data Size 4

Range

Class Constant

Access Read Only

Related Parameters

Remarks

20.12 SENSOR_RANGE.EU100 (EU at 100%)


Description The engineering unit value which represents the upper end of range of the associated block parameter.

Data Type Float

Data Size 4

Range

Class Constant

Access Read Only

Related Parameters

Remarks


20.13. SENSOR_RANGE.UNITS_INDEX (Units Index)


20.13 SENSOR_RANGE.UNITS_INDEX (Units Index)



Data Type Uint16

Data Size 2

Range °F Degree Fahrenheit

MPa Megapascal

kPa Kilopascal

bar Bar

mbar Millibar

psi Pounds per square inch

psia Pounds per square inch absolute

psig Pounds per square inch gauge

g/cm² Gram per square centimeter

kg/cm² Kilogram per square centimeter

inH2O (4°C) Inches of water at 4°C

inH2O (68°F) Inches of water at 68°F

mmH2O (4°C) Millimeters of water at 4°C

mmH2O (68°F) Millimeters of water at 68°F

inHg (0°C) Inches of mercury at 0°C

mmHg (0°C) Millimeters of mercury at 0°C

% Percentage

Class Constant

Access Read Only

Related Parameters


20.14. SENSOR_RESTART_COUNT


Remarks

20.14 SENSOR_RESTART_COUNT


Description Sensor restart count.

Data Type Uint16

Data Size 2

Range

Class Static

Access Read Only

Related Parameters

Remarks

20.15 SENSOR_RESTART_REASON


Description Sensor restart reason.

Data Type Uint8[4]

Data Size 1

Range 0 - None None

1 - Warm Restart Cmd Warm Restart Cmd

2 - Cold Restart Cmd Cold Restart Cmd

3 - FlexConn Restart Cmd

FlexConn Restart Cmd

4 - WDT Reset WDT Reset

5 - SPI TX Communication Problem

SPI TX Communication Problem


20.16. SENSOR_TEMP


6 - SPI RX Communication Problem

SPI RX Communication Problem

7 - FlexConn_Interface_Task problem

FlexConn_Interface_Task problem

8 - can_1wl_task problem

can_1wl_task problem

Class Static

Access Read Only

Related Parameters

Remarks

20.16 SENSOR_TEMP


Description Sensor temperature value.


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.17 SENSOR_TEMP.TEMP_VAL (Value)




20.18. SENSOR_TEMP.TEMP_VAL_STAT (Status)


Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.18 SENSOR_TEMP.TEMP_VAL_STAT (Status)



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.19 SENSOR_TYPE (Sensor Type)

Specific to Block(s) HLAI (AI channel)

Description Input type

Data Type Uint8

Data Size 1


20.19. SENSOR_TYPE (Sensor Type)


Range 4-20 mA

0-20 mA

0-5 V

1-5 V

Class Static

Access Read/Write

Related Parameters

Remarks


Description Describes the type of sensor.

Data Type Uint8

Data Size 1

Range TC-B Thermocouple Type B

TC-E Thermocouple Type E

TC-J Thermocouple Type J

TC-K Thermocouple Type K

TC-NIC Thermocouple Type NIC

TC-R Thermocouple Type R

TC-S Thermocouple Type S

TC-T Thermocouple Type T

PT-100 RTD Type PT-100



Ohm-100 Resistance input - 0 to 100 Ohms



20.19. SENSOR_TYPE (Sensor Type)




mV-10 Millivolt input - 0 to 10 mV



Class Static

Access Read/Write

Related Parameters

Remarks

Specific to Block(s) Multi AI DI DO (TempAI and CurrAI channels), Multi AI DI (TempAI and CurrAI channels)


Data Type Uint8

Data Size 1

Range TC-B Thermocouple B type

TC-E Thermocouple E type

TC-J Thermocouple J type

TC-K Thermocouple K type

TC-NIC Thermocouple NIC type

TC-R Thermocouple R type

TC-S Thermocouple S type

TC-T Thermocouple T type

mV-10 Millivolt input 0 to 10 mV



Class Static


20.20. SERIAL_NUMBER (Serial Number)


Access Read/Write

Related Parameters

Remarks

20.20 SERIAL_NUMBER (Serial Number)


Description Field device radio serial number.


Data Size 16

Range

Class Static – Corrosion

Constant – HLAI, FDAP, Pressure, Multi AI DI DO, Multi AI DI, Temperature DI, EnrafFlexLine

Access Read Only

Related Parameters

Remarks

20.21 SESSION_LIFETIME


Description Session key rotation period.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read/Write


20.22. SOFTWARE_REVISION


Related Parameters

Remarks

20.22 SOFTWARE_REVISION


Description Field device radio revision.


Data Size 16

Range

Class Constant

Access Read Only

Related Parameters

Remarks

20.23 STAT_ALERTACKRECV

Specific to Block(s) Corrosion, HLAI, Pressure, Multi AI DI DO, Multi AI DI, Temperature DI, OWA, EnrafFlexLine

Description Alert acknowledge from field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


20.24. STAT_ALERTACKSEND


20.24 STAT_ALERTACKSEND


Description Alert acknowledge from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.25 STAT_ALERTACKTIMEOUT


Description Alert acknowledge timeouts between the WDM and the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.26 STAT_ALERTREPRECV


20.27. STAT_ALERTREPSEND



Description Alert report from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.27 STAT_ALERTREPSEND


Description Alert report from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.28 STAT_ALERTREPTIMEOUT


Description Alert report timeouts between the WDM and the field device


20.29. STAT_EUI64STR


application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.29 STAT_EUI64STR


Description Field device EUI64 string.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.30 STAT_EXECREQRECV


Description Execute requests from the field device application to the WDM.

Data Type Uint32


20.31. STAT_EXECREQSEND (Request)


Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.31 STAT_EXECREQSEND (Request)


Description Execute requests from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.32 STAT_EXECREQTIMEOUT (Timeout)


Description Execute request timeouts between the WDM and the field device application.

Data Type Uint32

Data Size 4


20.33. STAT_EXECRSPRECV (Response)


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.33 STAT_EXECRSPRECV (Response)


Description Execute response from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.34 STAT_EXECRSPSEND


Description Execute response from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range


20.35. STAT_EXECRSPTIMEOUT


Class Dynamic

Access Read Only

Related Parameters

Remarks

20.35 STAT_EXECRSPTIMEOUT


Description Execute response timeouts between the WDM and the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.36 STAT_IP6ADDRSTR


Description Field device IP6 address string.


Data Size 32

Range

Class Dynamic

Access Read Only


20.37. STAT_MODEL


Related Parameters

Remarks

20.37 STAT_MODEL


Description Field device application model string.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.38 STAT_PUBMISSED (Input Missed)


Description Publication input missed from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


20.39. STAT_PUBRECV (Input)


20.39 STAT_PUBRECV (Input)


Description Publication input received by the WDM from the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.40 STAT_PUBSEND (Output)


Description Publication input sent to the WDM from the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.41 STAT_PUBSTALE (Input Stale)


20.42. STAT_PUBTIMEOUT (Output Timeout)



Description Stale publications from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.42 STAT_PUBTIMEOUT (Output Timeout)


Description Publication timeouts from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.43 STAT_RADIOMODEL



20.44. STAT_RADIOREVISION


Description Field device radio model string.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.44 STAT_RADIOREVISION


Description Field device radio revision string.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.45 STAT_RADIOVENDOR


Description Field device radio vendor string.



20.46. STAT_READREQRECV (Response)


Data Size 24

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.46 STAT_READREQRECV (Response)


Description Read requests from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.47 STAT_READREQSEND (Request)


Description Read requests from the WDM to the field device application.

Data Type Uint32

Data Size 4


20.48. STAT_READREQTIMEOUT (Timeout)


Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.48 STAT_READREQTIMEOUT (Timeout)


Description Read request timeouts between the WDM and the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.49 STAT_READRSPRECV


Description Read response from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range


20.50. STAT_READRSPSEND


Class Dynamic

Access Read Only

Related Parameters

Remarks

20.50 STAT_READRSPSEND


Description Read response from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.51 STAT_READRSPTIMEOUT


Description Read response timeouts between the WDM and the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic


20.52. STAT_RESETSTATS


Access Read Only

Related Parameters

Remarks

20.52 STAT_RESETSTATS


Description Reset statistics.

Data Type Boolean

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

20.53 STAT_REVISION


Description Field device application revision string.


Data Size 64

Range

Class Dynamic

Access Read Only

Related Parameters


20.54. STAT_SERIALNUMBER


Remarks

20.54 STAT_SERIALNUMBER


Description Field device serial number.


Data Size 16

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.55 STAT_SHORTADDR


Description Field device short address.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


20.56. STAT_VENDOR


20.56 STAT_VENDOR


Description Field device application vendor string.


Data Size 24

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.57 STAT_WRITEREQRECV


Description Write requests from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.58 STAT_WRITEREQSEND (Request)

Specific to Block(s) Corrosion, HLAI, Temperature DI, Pressure, Multi AI DI DO,


20.59. STAT_WRITEREQTIMEOUT


Multi AI DI, OWA, EnrafFlexLine

Description Write requests from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.59 STAT_WRITEREQTIMEOUT


Description Write request timeouts between the WDM and the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.60 STAT_WRITERSPRECV (Response)



20.61. STAT_WRITERSPSEND


Description Write response from the field device application to the WDM.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.61 STAT_WRITERSPSEND


Description Write response from the WDM to the field device application.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.62 STAT_WRITERSPTIMEOUT (Timeout)


Description Write response timeouts between the WDM and the field device application.


20.63. STATUS_ALERT


Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

20.63 STATUS_ALERT


Description Device status alert.


Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks

20.64 STATUS_ALERT.ALERT_DISABLE



Data Type Boolean

Data Size 1

Range


20.65. STATUS_ALERT.ALERT_PRIORITY


Class Static

Access Read/Write

Related Parameters

Remarks

20.65 STATUS_ALERT.ALERT_PRIORITY



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

20.66 SUBNET_ID (ISA100 Subnet ID)


Description ISA100.11A network subnet ID.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks


20.67. SV_UNIT


20.67 SV_UNIT


Description SV unit code.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

20.68 SV_VAL


Description SV value.

Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


20.69. SW_REV


20.69 SW_REV


Description Software revision

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

20.70 SYSTEM_LOCK


Description Enable lock state to prevent new devices from joining ISA100.11A network.

Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks


21. Txxxx Parameters

21.1 TAG


Description HART transmitter tag name.


Data Size 8

Range

Class Static

Access Read only

Related Parameters

Remarks

21.2 TAG_NAME (Tag Name)


Description Field device tag name.


Data Size 16

Range

Class Static

Access Read/Write

Related Parameters

Remarks


21.3. TAI_OFFSET


21.3 TAI_OFFSET


Description International Atomic Time offset.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read/Write

Related Parameters

Remarks

21.4 TC_RESISTANCE


Description Sensor resistance.


Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.5 TC_RESISTANCE.STATUS (Status)



21.6. TC_RESISTANCE.VALUE (Value)



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.6 TC_RESISTANCE.VALUE (Value)



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.7 TC_WARN_DETECT (Thermocouple Warn Detect)



21.8. TEMP_UNIT (Temperature Units)


Description Thermocouple warn detection.

Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.8 TEMP_UNIT (Temperature Units)


Description Units of temperature.

Data Type Uint16

Data Size 2



Class Static

Access Read/Write

Related Parameters

Remarks

21.9 Temperature_AIO_99_1.BREAK_DETECT

Specific to Block(s) Multi AI DI DO, Multi AI DI


Data Type Boolean


21.10. Temperature_AIO_99_1.CAL_CMD


Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.10 Temperature_AIO_99_1.CAL_CMD



Data Type Uint8

Data Size 1

Range None No value





Class Dynamic

Access Read/Write

Related Parameters

Remarks

21.11 Temperature_AIO_99_1.CAL_POINT_HI




21.12. Temperature_AIO_99_1.CAL_POINT_LO


Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.12 Temperature_AIO_99_1.CAL_POINT_LO



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.13 Temperature_AIO_99_1.CAL_SOURCE



Data Type Uint8

Data Size 1




21.14. Temperature_AIO_99_1.CAL_STATUS



Class Dynamic

Access Read Only

Related Parameters

Remarks

21.14 Temperature_AIO_99_1.CAL_STATUS



Data Type Uint8

Data Size 1

Range None No value






Bad Units Bad units




Class Dynamic

Access Read Only

Related Parameters

Remarks


21.15. Temperature_AIO_99_1.CAL_UNIT


21.15 Temperature_AIO_99_1.CAL_UNIT



Data Type Uint16

Data Size 2



mV millivolt

Ohm Ohm

% percent

Class Static

Access Read/Write

Related Parameters

Remarks

21.16 Temperature_AIO_99_1.FILTER_COEFFICIENT

Specific to Block(s) Temperature DI, Multi AI DI DO, Multi AI DI


Data Type Uint16

Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks


21.17. Temperature_AIO_99_1.MODE


21.17 Temperature_AIO_99_1.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.18 Temperature_AIO_99_1.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

21.19 Temperature_AIO_99_1.MODE.NORMAL


21.20. Temperature_AIO_99_1.MODE.PERMITTED




Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.20 Temperature_AIO_99_1.MODE.PERMITTED



Data Type BitString

Data Size 1



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.21 Temperature_AIO_99_1.MODE.TARGET


21.22. Temperature_AIO_99_1.PV




Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.22 Temperature_AIO_99_1.PV




Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.23 Temperature_AIO_99_1.PV.STATUS


21.24. Temperature_AIO_99_1.PV.VALUE




Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.24 Temperature_AIO_99_1.PV.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.25 Temperature_AIO_99_1.SCALE



Data Type Scaling

Data Size 11


21.26. Temperature_AIO_99_1.SCALE.DECIMAL


Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.26 Temperature_AIO_99_1.SCALE.DECIMAL



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.27 Temperature_AIO_99_1.SCALE.EU_0



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write


21.28. Temperature_AIO_99_1.SCALE.EU_100


Related Parameters

Remarks

21.28 Temperature_AIO_99_1.SCALE.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.29 Temperature_AIO_99_1.SCALE.UNITS_INDEX



Data Type Uint16

Data Size 2



Ohm Ohm

mV millivolt

µOhm microOhm

Class Static

Access Read/Write


21.30. Temperature_AIO_99_1.SENSOR_TYPE


Related Parameters

Remarks

21.30 Temperature_AIO_99_1.SENSOR_TYPE



Data Type Uint8

Data Size 1












Class Static

Access Read/Write

Related Parameters

Remarks

21.31 Temperature_AIO_99_1.TC_RESISTANCE


21.32. Temperature_AIO_99_1.TC_RESISTANCE.STATUS





Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.32 Temperature_AIO_99_1.TC_RESISTANCE.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.33 Temperature_AIO_99_1.TC_RESISTANCE.VALUE



21.34. Temperature_AIO_99_1.TC_WARN_DETECT



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.34 Temperature_AIO_99_1.TC_WARN_DETECT



Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.35 TemperatureDI_AIO_BLK_99_1.BREAK_DETECT



Data Type Boolean


21.36. TemperatureDI_AIO_BLK_99_1.CAL_CMD


Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.36 TemperatureDI_AIO_BLK_99_1.CAL_CMD



Data Type Uint8

Data Size 1

Range None No value





Class Dynamic

Access Read/Write

Related Parameters

Remarks

21.37 TemperatureDI_AIO_BLK_99_1.CAL_POINT_HI



Data Type Float


21.38. TemperatureDI_AIO_BLK_99_1.CAL_POINT_LO


Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.38 TemperatureDI_AIO_BLK_99_1.CAL_POINT_LO



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.39 TemperatureDI_AIO_BLK_99_1.CAL_SOURCE



Data Type Uint8

Data Size 1




21.40. TemperatureDI_AIO_BLK_99_1.CAL_STATUS



Class Dynamic

Access Read Only

Related Parameters

Remarks

21.40 TemperatureDI_AIO_BLK_99_1.CAL_STATUS



Data Type Uint8

Data Size 1

Range None No value






Bad Units Bad units




Class Dynamic

Access Read Only

Related Parameters

Remarks


21.41. TemperatureDI_AIO_BLK_99_1.CAL_UNIT


21.41 TemperatureDI_AIO_BLK_99_1.CAL_UNIT



Data Type Uint16

Data Size 2



Ohm Ohm

mV millivolt

Class Static

Access Read/Write

Related Parameters

Remarks

21.42 TemperatureDI_AIO_BLK_99_1.FILTER_COEFFICIENT



Data Type Uint16

Data Size 2

Range

Class Static

Access Read/Write

Related Parameters

Remarks


21.43. TemperatureDI_AIO_BLK_99_1.MODE


21.43 TemperatureDI_AIO_BLK_99_1.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.44 TemperatureDI_AIO_BLK_99_1.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks

21.45 TemperatureDI_AIO_BLK_99_1.MODE.NORMAL



21.46. TemperatureDI_AIO_BLK_99_1.MODE.PERMITTED



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.46 TemperatureDI_AIO_BLK_99_1.MODE.PERMITTED



Data Type BitString

Data Size 1



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.47 TemperatureDI_AIO_BLK_99_1.MODE.TARGET


21.48. TemperatureDI_AIO_BLK_99_1.PV




Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.48 TemperatureDI_AIO_BLK_99_1.PV




Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.49 TemperatureDI_AIO_BLK_99_1.PV.STATUS



21.50. TemperatureDI_AIO_BLK_99_1.PV.VALUE



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.50 TemperatureDI_AIO_BLK_99_1.PV.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.51 TemperatureDI_AIO_BLK_99_1.SCALE



Data Type Scaling

Data Size 11


21.52. TemperatureDI_AIO_BLK_99_1.SCALE.DECIMAL


Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.52 TemperatureDI_AIO_BLK_99_1.SCALE.DECIMAL



Data Type Uint8

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.53 TemperatureDI_AIO_BLK_99_1.SCALE.EU_0



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters


21.54. TemperatureDI_AIO_BLK_99_1.SCALE.EU_100


Remarks

21.54 TemperatureDI_AIO_BLK_99_1.SCALE.EU_100



Data Type Float

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.55 TemperatureDI_AIO_BLK_99_1.SCALE.UNITS_INDEX



Data Type Uint16

Data Size 2



Ohm Ohm

mV millivolt

Class Static

Access Read/Write

Related Parameters


21.56. TemperatureDI_AIO_BLK_99_1.SENSOR_TYPE


Remarks

21.56 TemperatureDI_AIO_BLK_99_1.SENSOR_TYPE



Data Type Uint8

Data Size 1



















Class Static


21.57. TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE


Access Read/Write

Related Parameters

Remarks

21.57 TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE




Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.58 TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic


21.59. TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE.VALUE


Access Read Only

Related Parameters

Remarks

21.59 TemperatureDI_AIO_BLK_99_1.TC_RESISTANCE.VALUE



Data Type Float

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.60 TemperatureDI_AIO_BLK_99_1.TC_WARN_DETECT



Data Type Boolean

Data Size 1

Range

Class Static

Access Read/Write

Related Parameters


21.61. TemperatureDI_BIO_BLK_97_1.MODE


Remarks

21.61 TemperatureDI_BIO_BLK_97_1.MODE



Data Type Mode

Data Size 4

Range

Class Static

Access Read/Write

Related Parameters

Remarks

21.62 TemperatureDI_BIO_BLK_97_1.MODE.ACTUAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read Only

Related Parameters

Remarks


21.63. TemperatureDI_BIO_BLK_97_1.MODE.NORMAL


21.63 TemperatureDI_BIO_BLK_97_1.MODE.NORMAL



Data Type Uint8

Data Size 1


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.64 TemperatureDI_BIO_BLK_97_1.MODE.PERMITTED



Data Type BitString

Data Size 1



Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks


21.65. TemperatureDI_BIO_BLK_97_1.MODE.TARGET


21.65 TemperatureDI_BIO_BLK_97_1.MODE.TARGET



Data Type Uint8

Data Size 1

Range Normal Normal


Auto Automatic mode

Man Manual

Class Static

Access Read/Write

Related Parameters

Remarks

21.66 TemperatureDI_BIO_BLK_97_1.PV_B




Data Size 5

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


21.67. TemperatureDI_BIO_BLK_97_1.PV_B.STATUS


21.67 TemperatureDI_BIO_BLK_97_1.PV_B.STATUS



Data Type Uint8

Data Size 1

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

21.68 TemperatureDI_BIO_BLK_97_1.PV_B.VALUE



Data Type Uint8

Data Size 1



Class Dynamic

Access Read Only

Related Parameters

Remarks

21.69 TOTAL_AP_LICENSES


Description Total number of access points allowed to be licensed.


21.70. TV_UNIT


Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters LICENSED_AP_COUNT, LICENSE_STATE, and UNLICENSED_AP_COUNT

Remarks

21.70 TV_UNIT


Description TV unit code.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

21.71 TV_VAL


Description TV value.

Data Type Float

Data Size 4

Range


21.71. TV_VAL


Class Dynamic

Access Read Only

Related Parameters

Remarks


21.71. TV_VAL



22. Uxxxx Parameters

22.1 UAP_OPTION (Enable Software Write Protect)


Description Option

Data Type BitString

Data Size 2

Range Enable Software Write Protect (8192)

Class Static

Access Read/Write

Related Parameters

Remarks

22.2 UAP_STREV (Static Revision)


Description Field device application static data revision level.

Data Type Uint16

Data Size 2

Range

Class Static Revision

Access Read Only

Related Parameters

Remarks


22.3. UAP_VERREV


22.3 UAP_VERREV


Description Field device application revision.


Data Size 64

Range

Class Static

Access Read Only

Related Parameters

Remarks

22.4 UAPMO_ALERT

Specific to Block(s) Corrosion, HLAI, Multi AI DI DO, Multi AI DI, Pressure, Temperature DI

Description Device alerts.

Data Type Uint8

Data Size 1

Range Begin Alert Recovery

End Alert Recovery

Device Restart

Maintenance Alert

Out of Specification Alert

Function Check Alert

Failure Status Alert

Class Static


22.5. UCDNUM


Access Read/Write

Related Parameters

Remarks

22.5 UCDNUM


Description Number of uncommissioned devices available on the CDA interface.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

22.6 UNIQUE_ID


Description Unique id of the HART transmitter.


Data Size 5

Range

Class Static

Access Read Only

Related Parameters

Remarks


22.7. UNLICENSED_AP_COUNT


22.7 UNLICENSED_AP_COUNT


Description Current count of unlicensed access points.

Data Type Uint16

Data Size 2

Range

Class Dynamic

Access Read Only

Related Parameters LICENSED_AP_COUNT, LICENSE_STATE, and TOTAL_AP_LICENSES

Remarks

22.8 UPTIME (Uptime)


Description Field device radio uptime in seconds.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks


Description Total uptime since last WDM restart.



22.9. UPTIMEIDLE


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

22.9 UPTIMEIDLE


Description Idle uptime since last WDM restart.


Data Size 32

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

22.10 USE_DYNAMIC_B (Use Dynamic B Value)


Description Enable dynamic B value.

Data Type Boolean

Data Size 1

Range

Class Static


22.10. USE_DYNAMIC_B (Use Dynamic B Value)


Access Read/Write

Related Parameters

Remarks


22.10. USE_DYNAMIC_B (Use Dynamic B Value)



23. Vxxxx Parameters

23.1 V_POWER (Power Voltage)


Description Power voltage

Data Type Float

Data Size 4

Range

Class Dynamic

Static - EnrafFlexLine

Access Read Only

Related Parameters

Remarks

23.2 VENDOR (Vendor)


Description WDM vendor identification string.


Data Size 24

Range

Class Dynamic

Access Read Only

Related Parameters

Remarks

23. Vxxxx Parameters

23.3. VENDOR_ID


23.3 VENDOR_ID


Description Field device radio Vendor ID.


Data Size 16

Range

Class Constant

Access Read Only

Related Parameters

Remarks


24. Wxxxx Parameters

24.1 WRITE_PROTECT


Description Write protect.

Data Type Uint8

Data Size 1

Range

Class Static

Access Read Only

Related Parameters

Remarks

24.2 WRITEREQCNT (Request)


Description Field device radio DMAP write requests.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters WRITERESCNT, WRITETMOCNT, and RESET_COUNTERS



24.3. WRITERESCNT (Response)


24.3 WRITERESCNT (Response)


Description Field device radio DMAP write responses.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters WRITEREQCNT, WRITETMOCNT, and RESET_COUNTERS


24.4 WRITETMOCNT (Timeout)


Description Field device radio DMAP write timeouts.

Data Type Uint32

Data Size 4

Range

Class Dynamic

Access Read Only

Related Parameters WRITEREQCNT, WRITERESCNT, and RESET_COUNTERS



24.4. WRITETMOCNT (Timeout)


Honeywell Process Solutions 1860 W. Rose Garden Lane Phoenix, AZ 85027 USA

parameter reference dictionary - lesman.com€¦ · honeywell process solutions onewireless...

Documents