paradyne 6218-a1-200 - clearwave · paradyne 6218-a1-200 please note: please read through all of...
TRANSCRIPT
11/28/12 Parady ne 6218-A1-200
1/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
Paradyne 6218-A1-200
Please Note: Please read through all of this documentation before configuring the CPEThis Document explains how to configure a Paradyne 6218-A1-200 for DHCP if the modem has been defaulted.
Radio Button (option chosen)
� �Radio Button (option not chosen)
1. First we need to statically assign an IP address and DNS Servers to the customers PC/Laptop if the modem hasbeen defaulted.
IP Address : 192.168.1.2Subnet Mask : 255.255.255.0Gateway : 192.168.1.1Primary DNS : 12.223.17.4Secondary DNS : 12.223.18.4 Please Note: Once Modem is correctly configured please change the customer's computer back to obtain anIP address and DNS server automatically.
2. Pull up the Web browser and type �http://192.168.1.1� in the URL field.
Log into the CPE with the below information:User Name: AdminPassword: Admin
11/28/12 Parady ne 6218-A1-200
ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
3. The Paradyne Home page will be displayed.
4. On the top menu click on the �Setup�.
11/28/12 Parady ne 6218-A1-200
4/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
5. On the left menu click on �Firewall/Nat Services�.
11/28/12 Parady ne 6218-A1-200
5/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
6. Click on the �check box� next to Enable Firewall and NAT Service which will insert a tick. Then click on�Apply� at the bottom of the screen
11/28/12 Parady ne 6218-A1-200
6/30
7. A box will popup stating �You need to login again when you enable Firewall/Nat services� and click on the
�OK� button.
11/28/12 Parady ne 6218-A1-200
7/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
8. Log into the DSL Modem with the below information:
User Name: AdminPassword: Admin
Parady ne 6218-A1-200
8/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
9. The Paradyne Home page will be displayed.
11/28/12 Parady ne 6218-A1-200
9/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
10. On the top menu click on the �Setup�.
11/28/12 Parady ne 6218-A1-200
ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
11. On the left menu click on �WAN_Bridge�.
Parady ne 6218-A1-200
11/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
12. You will see the following screen with the default settings.
11/28/12 Parady ne 6218-A1-200
12/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
13. Enter the following information:
13.1. In the Name: field, type over �WAN_Bridge� with �Clearwave�.13.2. Choose �DHCP� from the drop down menu of �the Type: section13.3. Click on the �check box� next to Default Gateway which will insert a tick.13.4. Verify the Grey out �PVC Settings� are correct
13.4.1.1.1. VPI is 013.4.1.1.2. VCI is 3513.4.1.1.3. QOS is UBR13.4.1.1.4. PCR is 013.4.1.1.5. SCR is 013.4.1.1.6. MBS is 013.4.1.1.7. CDVT is 0
13.5. Then click on �Apply� at the bottom of the screen. Once completed the screen should have all relevant information (see below screen shot).
11/28/12 Parady ne 6218-A1-200
ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
14. On the left menu click on �LAN Configuration�.
11/28/12 Parady ne 6218-A1-200
14/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
15. In the Domain: field type over ar7 with clearwave.com
11/28/12 Parady ne 6218-A1-200
15/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
16. Click on the �radio button� next to Enable DHCP Server which will insert a dot and click on �Apply� at thebottom of the screen
11/28/12 Parady ne 6218-A1-200
ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
17. On the top menu click on �Advanced�.
11/28/12
17/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
18. On the left menu click on �LAN Clients�.
11/28/12 Parady ne 6218-A1-200
18/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
19. In the EnterIP Address: field type 192.168.1.2 in the box then click �Apply at the bottom of the screen.
11/28/12 Parady ne 6218-A1-200
19/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
20. On the left menu click on �Port Forwarding�.
11/28/12
20/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
21. Click on the �check box� next to Allow Incoming Ping which will insert a tick and click apply at the bottom ofthe screen.
11/28/12 Parady ne 6218-A1-200
21/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
22. Please ask the Customer if they require �Wireless Access� or �intend using the �Wireless Access Point�.
If the customer states they will be using Wireless then continue to �step 26�.23. To disable Wireless, from the top menu, Click on �Wireless�
� Please let the customer now that we will enable the wireless but do not support the wireless just basicinternet connectivity (wired).
� That the default wireless setup is unsecured and open for the world to see with no encryption.
� Please suggest to the customer to secure the wireless and the following are some of the suggestions:v To use encryption, refer the customer the modem and wireless device documentation.v To not broadcast the SIDv To use MAC filtering
11/28/12 Parady ne 6218-A1-200
22/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
24. On the left menu click on �Setup�.
25. Click on the �check box� next to Enable AP: which will remove a tick and click �Apply� at the bottom of thescreen.
11/28/12 Parady ne 6218-A1-200
24/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
26. On the top menu click on �Tools�.
11/28/12 Parady ne 6218-A1-200
25/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
27. On the left menu click on �System Commands�.
11/28/12 Parady ne 6218-A1-200
26/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
28. Click on the �Save All� button and the screen should refresh.
11/28/12 Parady ne 6218-A1-200
27/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
29. Click on the �Restart� Button.
11/28/12 Parady ne 6218-A1-200
28/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
30. Click on the �OK� button and you should see the progress count in the bottom left hand corner.
11/28/12 Parady ne 6218-A1-200
29/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
31. Once the Progress count has finished you should be right back and the log prompt.
11/28/12 Parady ne 6218-A1-200
30/30ccinf o.clearwav e.com/modems/6218A1200/6218-A1-200.htm
32. Set the customer back to obtain an IP address automatically configuration for the Ethernet adapter.33. The Customer should be able to get on line now.