paradigma solar heating systems - solazyn corporation- … · all this is done by your solar...

Excellent climate protection

Paradigmasolar heating systems

INNOVATIONAWARD

2006

All good things come from above

Its diameter is 109-times that of the earth, and its outside temperature is 6,000 °C.

It generates an output of 370 quadrillion watts and continuously sends this energy,

equivalent to 100 million nuclear power plants, to the earth. And theres no danger

of this stopping for the next 5 billion years.

Is there any other source of energy apart from the sun which, in contrast with

fossil fuels, is safe and available in an unlimited supply? Is there any other form

of heat energy which is available at no charge and friendly to the environment i.e.

CO2-free?

And from Paradigma

Paradigma solar heating systems provide the best way of effectively using solar

energy for water heating and heating support inside your own 4 walls.

As one of the leading suppliers of ecological heating systems in Europe, Paradigma

has been developing heating systems with integrated solar collectors since the

late 80.

Paradigma solar heating systems such as the AquaSystem awarded with the

Bundespreis 2006 (German Federal Award) are now

amongst the most innovative. These systems also

feature some of the highest output yields.

Welcome to the sunny side.

2

Ideal:

the sun supplies free

energy to your home.

Join in,

harvest the sun,

save energy!

Optimal:

solar energy for people

and nature.

Ideal for the climate

The installed base of solar heating systems has already saved roughly 70 million litres

of heating oil* – this corresponds to more than 2,300 full road tankers. Even better for

the environment and climate: 190,000 tons of harmful CO2 are avoided in the first

place.

And for the heating boiler

The installation of a Paradigma solar heating system also significantly extends the life

of your boiler. This means the heating boiler hardly has to be switched on to heat water

during the transitional periods and in summer. All this is done by your solar system.

Paradigma solar heating

systems have an appea-

ling look. The attractive

evacuated tube collec-

tors can be adapted to

any architecture.

3

* applies to over 66,000 CPC collector modules which Paradigma sold and installed by the end of 2006.

The choice of collector is decisive.

4

Enhances your roof

Users of Paradigma solar heating systems Made in Germany can be seen from far

away. In an age when everyone is talking about climate change, these collector

modules with up to 21 evacuated tubes are visible proof of property owners acting in

an environmentally conscious manner to make sparing use of the available resources.

Converting light to heat

Paradigma evacuated tube collectors convert solar rays to heat energy using a

principle which is both simple and sophisticated.

Each collector module is equipped with a row of evacuated tubes that use a special

absorber layer to convert sunlight to heat. Each tube functions like a thermos flask

by storing heat for longer periods and not emitting it. This becomes noticeable when

touching the tubes on a connected collector. The outer tube shell is cold. The inside is

hot.

In order to ensure that light also reaches the rear of the evacuated tubes, a highly

reflective CPC-reflector (Compound Parabolic Concentrator) directs the solar rays

shining between the tubes to those sides not directly exposed to light. The reflector

also ensures that the light strikes the absorber at an optimum angle (for further

details, see page 18).

Their clever design means

that CPC evacuated tube

collectors produce some

of the highest output

yields particularly during

transitional periods.

This guarantees high yields...

... even when there is little sunshine. CPC evacuated tube collectors output high

energy yields over the whole year, even during unfavourable weather conditions such

as transitional periods, during the winter or when the skies are cloudy.

Little space required ...

... particularly during poor weather conditions. At a solar irradiation level of 400 W

per m2, an outside temperature of 10 °C and a flow temperature of 60 °C , the CPC

evacuated tube collector produces 40 % higher energy yields than the best flat plate

collectors available today. At 0 °C, the energy yield of the CPC evacuated tube

collector is up to 5.4 times higher than an average flat plate collector. This means that

when using average flat plate collectors, 5.4 times the collector surface area would

be needed to produce the same amount of energy.

5

CPC Allstar

Single collector for solar-heated hot water

Specially designed for single-family homes with up to 4 persons

Installation on flat and pitched roofs as well as facades

10 year glass breakage guarantee for evacuated tubes*

CPC Star azzurro

For solar-heated hot water and heating support

Can be connected in series up to 15 m2

Installation on flat and pitched roofs as well as facades

10 year glass breakage guarantee for evacuated tubes*

* as the result of hail or frost damage. Guarantee valid for whole of Europe.

0°C Air temperature 0°C20

7 W

345

W

484

W

84 W

241

W

454

W

Col

lect

or o

utpu

t (w

atts

)

CPC 14 Star azzurro

best flat plate collector

average flat plate collector

Comparison between evacuatedtube collectors and flat plate collec-tors at an irradiation level of 400 Wper m2, 2.33 m2 aperture surfaceand 60 °C flow temperature.

Quality label for solar- thermal products based on European standards.

The Aqua solar heating system

Assuming that a specialized installer could easily connect a solar heating system to

your existing heating installation and components such as the hot water tank could

be re-used‚ wouldn´t you be interested in immediately upgrading your heating system

to environmentally-friendly solar energy?

The patented Aqua solar heating system from Paradigma is one of the most innova-

tive systems around. What makes it special: Pure water, instead of the usual antifre-

eze mixture, transports heat from the solar collector to the hot water storage tank.

This means that in most cases you do not need to replace your storage tank in order

to enjoy solar-heated water or support your heating with solar energy. In a nutshell:

the sun can come, the tank can stay.

Award-winning

Not only has the Aqua solar heating system from Paradigma been installed almost

20,000-times in Europe, it was also awarded the Bundespreis 2006 (German Federal

Award) for outstanding innovative craftsmanship.

One of the most innovativesystems ever.

6

INNOVATIONAWARD

2006

Simple to connect

The AquaSystem is particularly suited to allow simple connection to existing heating

installations. Its versatility also comes to the fore in new installations. The collector

functions as a second independent heating boiler to reduce oil, gas or wood pellet

usage. The minimum flow temperature of 60 °C means that solar-heated water is

directly available once it has filled the top layer of the tank.

Long-life design

The AquaSystem is easier to maintain than conventional solar heating systems in

which the antifreeze-water mixture has to be regularly replaced. Furthermore the

AquaSystem is equipped with an automated functional check. Errors are signalled by

an acoustic alarm. This will also make you feel good – a life-long guarantee against

frost damage.*

7

Aqua solar heating system

Patented solar heating system using pure water

Ideal for upgrading an existing heating installation to use solar energy

No need to replace the hot water storage tank

The boiler life is extended

Heating emissions are reduced

For 2 – 8 person households

Convenient drinking water heating and heating support

Can be combined with condensing gas boiler and wood pellet systems

Life-long guarantee against frost damage*

* refers to the life of the installed AquaSystem. Subject to compliance with the safety provisions and all requirements stated in the Paradigmainstruction documents as well as the general terms and conditions issued by Paradigma Energie- und Umwelttechnik GmbH & Co. KG (availablefrom your Paradigma system partner).

The solar controller ensures

optimum interaction between

individual components.The solar station keeps

the circuit moving.

Aqua solar heating systems include everything you need

When compared to conventional solar heating systems, an AquaSystem consists of

a manageable amount of individual components. All of these are synchronised to

provide optimum compatibility. Ultimately the goal is to have extremely satisfied and

contented customers.

Collector including station and controller

It all starts with the solar collector on your AquaSystem. Every solar ray is collected,

even the weak ones. This light is converted to heat which is transferred to the water

flowing through the collector tubes.

The solar station then pumps this solar-heated water to the hot water storage tank,

where the heat can be extracted immediately and directly. The solar station also

pumps cold water back to the collector to close the circuit. The solar controller is res-

ponsible for energy management in the solar circuit. It indicates the energy yields

whilst ensuring trouble-free and safe operation.

Few components, many advantages.

8

The solar collector

converts light to heat.

The tank stores the

solar-heated water.

Storage tanks also available

Regardless of whether you use your AquaSystem to produce solar-heated hot water

or provide additional solar heating support – a wide range of high-performance

storage tanks is available to meet specific requirements.

From solar storage tanks to the rapid heating of drinking water, combined storage

tanks with integrated hot water stainless steel tanks and fresh water storage tanks for

water heating and partial solar heating – all Paradigma tanks provide a high degree

of comfort and instant hot water as soon as it is supplied.

Existing tanks can also be reused. This is what makes Aqua solar heating systems

special: they can simply be connected to existing heating systems.

9

Components of the Aqua solar heating system

CPC Allstar collectors for water heating

CPC Star azzurro collectors for water heating and partial solar heating

Solar station STAqua

SystaSolar Aqua solar controller

Aqua solar storage tank for water heating

TITAN Aqua combined storage tank for water heating and partial solar heating

OPTIMA Aqua fresh water storage tank for water heating and partial solar heating

AquaPackage Deals CPC Allstar

For pure solar-heated water

AquaPackage CPC 32 Allstar for 2 – 3 persons

AquaPackage CPC 40 Allstar for 3 – 4 persons

Solar energy, simpler than it´s ever been

Paradigma has bundled the AquaPackage Deals to make it even easier to change to

solar energy. These bundles contain all the required components for utilising solar

energy in an effective, economical and environmentally friendly way. Suitable for

upgrading existing systems or new installations. May be utilised for water heating,

partial solar heating or both.

AquaPackage Deals CPC Allstar

Your household includes a maximum of four persons. Your maximum daily hot water

consumption is 150 – 200 litres. You would like to use your Aqua solar heating pack-

age for solar water heating. You would like to continue using your existing tank with

only one heat exchanger.

The AquaPackage Deals CPC Allstar are the ideal solution. They provide increased

hot water comfort and better usage of existing storage capacity.

And if you still want to install a new storage tank – the compact Aqua 190 solar

storage tank requires less space, whilst having a capacity of 190 litres as well as

lower heat losses.

AquaPackage Deals CPC Allstar and CPC Star azzurro.

10

Opt

iona

l sto

rage

tank

AquaPackage Deals CPC Star azzurro

For solar-heated hot water and (optional) heating support

Subsequent extension of the collector area possible

AquaPackage CPC 21 Star azzurro for 2 – 3 persons

AquaPackage CPC 45 Star azzurro for 3 – 4 persons

AquaPackage 2 x CPC 14 Star azzurro for 3 – 4 persons



AquaPackage Deals CPC Star azzurro

The AquaPackage Deals CPC Star azzurro are suitable for solar water heating in

households of up to eight persons. They are ideal for upgrading existing heating

installations and hot water storage tanks with only one heat exchanger.

It is also possible to feed any excess solar energy into the heating system – using

so-called tuning kits from Paradigma to provide heating support.

If there is no suitable existing tank – the Paradigma system partner will immediately

identify this –, Paradigma also supplies tanks suitable for use with the AquaPackage

Deals CPC Star azzurro: Aqua solar storage tank in sizes up to 470 litres.

11

Opt

iona

l sto

rage

tank

Hungry for the sun

If your existing tank is too small or badly insulated, or if it cannot be integrated

into the AquaSystem for other reasons, then the Aqua solar storage tank is the right

choice in pure water heating applications.

Hot water, fast

The Aqua solar storage tank from Paradigma is a vertical floorstanding tank for

drinking water and water heater. By connecting the solar energy system to the top of

the Aqua solar tank, hot water is available much quicker than in conventional solar

storage tanks, which use a water-antifreeze mixture as the heat transfer medium and

feed the solar heat through a heat exchanger below.

The Aqua solar storage tank from Paradigma is easy to integrate in the heating

installation. It uses a bare-tube heat exchanger to which the solar energy system and

Paradigma condensing gas boiler or wood pellet boiler – or an existing boiler – are

connected.

Storage tank for solar-heated water.

12

It usually only takes a few hours after

delivery until assembly is completed

and you can enjoy your first bath in

solar-heated water.

Quick and effective:

upgrading to the sun.

Aqua solar storage tank

For the rapid heating of drinking water

Suitable for water with a high limescale content

Solar circuit does not contain any antifreeze agent

Available in four sizes up to 470 litres

Easy installation

Produced to a high quality

The Aqua solar storage tanks from Paradigma are made from ST 37-2 steel with

enamelled and anodic protection against corrosion. The storage tanks are suitable

for systems with maximum permitted water temperatures up to 95 °C and operating

overpressures up to 10 bar. CFC-free polystyrene foam insulation retains the heat

where it belongs – in the storage tank.

Easy to install

As opposed to conventional storage tanks, no separation is required between the

solar and heating circuits. This significantly reduces the installation effort.

13

CPC/TITAN AquaPackage Deals

Do you want to use solar energy to heat the water in your home and provide partial

solar heating – then the CPC/TITAN AquaPackage Deals are the right ones for you.

In summer, the CPC/TITAN AquaPackage Deals almost completely relieve the load on

the existing boiler. During the transitionary months, solar energy is used to support

the heating. And even in the depths of winter, a large proportion of the drinking

water is solar-heated. The package includes a CPC Star azzurro evacuated tube

collector that feeds hot water above 60 °C into the combined storage tank. It there-

fore acts as a second boiler of equal importance.

In order to further minimise the power consumption of your AquaPackage Deals, the

solar pump is only switched on if a worthwhile amount of solar heat is stored in the

collector. This interval operation can result in large temperature differences between

the flow and return and helps minimise pipe losses.

CPC/TITAN AquaPackage Deals including storage tank.

14

CPC/TITAN AquaPackage Deals

For solar water heating and partial solar heating using the return flow boost principle

AquaPackage 2 x CPC 21 Star azzurro/TITAN 400 for 2 – 4 persons




15

Combined storage tank TITAN Aqua

The TITAN Aqua is the integrated storage tank solution used in the CPC/TITAN

AquaPackage Deals. The stored solar energy can be used for solar water heating as

well as partial solar heating. The integrated heating buffer significantly reduces

the frequency of boiler switch-on operations. This extends the life of the boiler and

reduces harmful emissions.

Peak withdrawal output

The TITAN Aqua has an integrated hot water stainless steel tank, available in three

sizes up to 230 litres. It has an impressive hot water peak withdrawal output, despi-

te its relatively low drinking water capacity.

The TITAN Aqua is a vertical floorstanding steel tank with a quality certificate. Its

excellent thermal insulation is made from CFC-free polystyrene foam. It is suited to

heating water storage for heating systems with flow temperatures of up to 90 °C,

heating water-side operating overpressures of up to 3 bar and hot water-side ope-

rating pressures of up to 8 bar.

Combined storage tank TITAN Aqua

Impressive hot water peak withdrawal output

Solar heating connection by means of solar return connection/buffer principle

Low space requirement due to moderate tank size

Three sizes up to a capacity of 836 litres

Available in AquaPackage Deals up to 15 m2 collector area

CPC/OPTIMA AquaPackage Deals including storage tank.

16

CPC/OPTIMA AquaPackage Deals

Whether you wish to install a heating system in a new building or completely

replace an older heating installation, the AquaPackage CPC/OPTIMA offers many

advantages. Solar energy is an environmentally friendly, economical and effective

way to heat water and provide partial solar heating.

The CPC/OPTIMA AquaPackage includes: an appropriately dimensioned CPC Star

azzurro evacuated tube collector, matching OPTIMA Aqua fresh water storage tank,

STAqua single-string solar station, SystaSolar Aqua solar controller.

Solar energy specialists

Your Paradigma installation engineer will advise you on the right choice of

AquaPackage Deals. He will plan, install and maintain your system. Simply ask for

further details.

CPC/OPTIMA AquaPackage Deals

For solar water heating and partial solar heating using the buffer principle

AquaPackage 2 x CPC 21 Star azzurro/OPTIMA 500 for 2 – 4 persons




Combined storage tank OPTIMA Aqua

The OPTIMA Aqua heating buffer tank is an integral part of the AquaPackage Deals

CPC/OPTIMA . Its strength: Water is only heated on demand. The heated water is

therefore of a high hygienic quality. Instead of water which has been stored in a tank,

you will always have “fresh” hot water.

Hot water comfort

As water is being used, the stratification technology ensures the controlled stratified

discharging of the storage tank. More than double the storage tank heat is used to

heat the water than without this control technology. The heat flowing into the tank is

available for use after a brief charging period.

No heat escapes into the cellar room thanks to the use of CFC-free polystyrene foam,

reflective coatings and siphoned storage tank connections; consequently less

reheating is required and more hot water is available.

17

Fresh water storage tank OPTIMA Aqua

For hygienically heated fresh water based on the flow-through principle

High degree of hot water comfort

Storage tank with a capacity of several days for water heating and partial solar heating

Three sizes up to a capacity of 990 litres

Available in AquaPackage Deals up to 15 m2 collector area

Evacuated tube collectorsCPC Allstar and CPC Star azzurro

18

Evacuated tubes based on the thermos flaskprinciple and consisting of two concentric glasstubes with an evacuated gap. This serves toprevent heat loss.

Highly selective absorber layer, Al/AlN, on the inner glass tubes. For maximising energy yield.

Aluminium heat transfer plate.Provides optimum heat transfer the absorber to the heat transfer medium system.

U-shaped stainless steel pipe. For effectively transporting the extracted heat.

4

3

2

1 Mineral wool insulation with aluminiumlamination. Serves to prevent heat loss inthe manifold.

Compression ring fittingØ 12 mm for flow and return. For safeand easy-to-install pipework connections.

A highly reflective, weather resistant CPC reflector (Compound Parabolic Concentrator)behind the evacuated tubes helps to increasetheir efficiency. This reflector directs the incidentlight rays to the absorber.

5

6

7

12

34

5

67

Technical data CPC Allstar

Evacuated tube collector CPC 32 Allstar CPC 40 Allstar

Number of evacuated tubes 16 20

η0 in relation to the aperture surface, EN 12975 % 64.4 64.4

a1 with wind in relation to aperture W/(m2·K2) 0.749 0.749

a2 with wind in relation to aperture W/(m2·K2) 0.005 0.005

Collector yield (location Würzburg,reference surface area 5 m2) kWh/(m2·K2) 602 602

Grid dimensions (length x width x height) m 1.90 x 1.85 x 0.10 1.90 x 2.31 x 0.10

Gross surface area m2 3.52 4.37

Collector aperture surface m2 3.20 4.00

Collector capacity I 2.4 2.9

Pressure loss at 2.0 l/min. and 40 °C, ca. mbar 311 389

Weight, approx. kg 53 66

Operating overpressure, max. permissible bar 10 10

Flow/return, compression ring fitting for mm Cu 12 Cu 12

Colour, Eloxal aluminium grey aluminium grey

Colour of all plastic parts black black

Number of bearing rails for angle frame 2 3

The design principle of CPC evacuated tubes

19

Certification and environmental aspects

- Certified as CE 0036 by German certification body TÜV Süddeutschland and tested according to the applicable European standards

for solar collectors

- Hail resistance according to EN 12975 confirmed by TÜV Rheinland

- 10 year free replacement of tubes in case of glass breakage as the result of hail or frost damage

- Awarded the Solar KEYMARK and the “DIN-Geprüft” (DIN tested) mark

Heat transfer unit CPC Star azzurro Evacuated tube design

Manifold pipe Evacuated tube Absorber layer Heat transfer plate Stainless steel pipe

Evacuated tube

U-pipe Heat transfer plateCPC reflector CPC reflector

Technical data CPC Star azzurro

Evacuated tube collector CPC 14 Star CPC 21 Star CPC 30 Star CPC 45 Starazzurro azzurro azzurro azzurro

Number of evacuated tubes 14 21 14 21

η0 in relation to the aperture surface, EN 12975 % 64.4 64.4 64.4 64.4

a1 with wind in relation to aperture W/(m2·K2) 0.749 0.749 0.749 0.749

a2 with wind in relation to aperture W/(m2·K2) 0.005 0.005 0.005 0.005

Collector yield (location Würzburg,

Reference surface area 5 m2) kWh/(m2·K2) 602 602 602 602

Grid dimensions (length x width x height) m 1.61 x 1.62 x 0.12 1.61 x 2.42 x 0.12 2.03 x 1.62 x 0.12 2.03 x 2.42 x 0.12

Gross surface area m2 2.61 3.91 3.29 4.91

Collector aperture surface m2 2.33 3.5 3.0 4.5

Collector capacity I 2.3 3.4 2.7 4.1

Pressure loss at 0.25 l/min and 40 °C, ca. mbar 4 10 7 16

Weight, approx. kg 42 62 52 76

Operating overpressure, max. permissible bar 10 10 10 10

Flow/return, compression ring fitting for mm Cu 15 Cu 15 Cu 15 Cu 15

Colour, Eloxal aluminium grey aluminium grey aluminium grey aluminium grey

Colour of all plastic parts cobalt blue cobalt blue cobalt blue cobalt blue

Number of bearing rails for angle frame 2 3 2 3

20

Aqua solar storage tankfor the rapid heating of drinking water

TITA

N A

qua

Aqu

a so

lar

stor

age

tank

OPT

IMA

Aqu

a

*) As specified in German standard DIN 4701-10, not including the losses of connected pipes. These specifications are subject to change in respect of tolerances and technical modifications whichthe manufacturer reserves the right to make without notice.

1) For boiler output of 20 kW at 50 °C withdrawal temperature and full tank. Performance data for other operating conditions and boiler output values can be found in the Paradigma design handbook.

Technical data

Fresh water storage tank Aqua 190 Aqua 290 Aqua 390 Aqua 490

Height/diameter with insulation mm 1210/680 1413/790 1723/790 1915/790

Permissible operating pressure bar 10 10 10 10

Permissible operating temperature °C 95 95 95 95

EPS insulation with air gap mm 80 95 95 95

Nominal storage tank capacity l 190 316 410 470

Boiler backup heating volume l 190 120 150 165

Standby losses *) kWh/d 1.4 1.6 2 2.2

Technical data heat exchanger

Total surface area m2 1.5 2.2 2.4 2.6

Total capacity l 9 14 16 17

Excerpt from performance data 1)

10 minute peak withdrawal quantity l 256 364 461 519

60 minute continuous withdrawal quantity l 640 745 839 899

Combined and fresh water storage tankTITAN Aqua and OPTIMA Aqua

21

*) Maximum 2 bar for empty or depressurised inner tank, otherwise 3 bar. **) According to German standard DIN 4701-10, not including the losses of connected pipes. These specifications aresubject to change in respect of tolerances and technical modifications which the manufacturer reserves the right to make without notice.

1) At 65°C tank temperature, hot water tap temperature of 45 °C and boiler output of 20 kW. The solar energy system is not taken into account. Performance data for other operating conditionsand boiler output values can be found in the Paradigma design handbook.

Technical data – TITAN Aqua

Combined storage tank TITAN Aqua 400 TITAN Aqua 600 TITAN Aqua 850

Height/diameter with insulation mm 1520/850 1820/950 1980/1000

Permissible operating overpressure bar 2 (3) *) 2 (3) *) 2 (3) *)

EPS insulation with air gap (cladding/cover) mm 100/150 100/150 100/170

Buffer capacity (incl. heat exchangers and hot water storage tank) l 385 642 836

Permissible tank temperature °C 110 110 110

Standby losses **) kWh/d 1.8 2.4 2.8

Domestic water heat exchanger

Permissible operating overpressure bar 8 8 8

Surface area m2 approx. 1.8 approx. 2.5 approx. 2.7

Capacity of hot water heat ex. or hot water tank l 120 150 230

Permissible hot water temperature °C 95 95 95


10 minute peak withdrawal quantity l 162 196 288

60 minute continuous withdrawal quantity l 531 566 658

Technical data – OPTIMA Aqua

Fresh water storage tank OPTIMA Aqua 500 OPTIMA Aqua 800 OPTIMA Aqua 1000

Height/diameter with insulation mm 1790/950 1980/1050 2070/1100


EPS insulation side/cover/base mm 120/150/50 120/150/50 120/150/50

Total capacity (incl. heat exchanger) l 550 830 990

Permissible tank temperature °C 90 90 90

Standby losses *) kWh/d 2 2.3 2.6

Domestic water heat exchanger


Surface area m2 3.9 4.8 7.5

Capacity l 5 10 12


Withdrawal quantity (l) without reheating of boiler/withdrawal rate l/min 200/15 280/15 450/25

Withdrawal quantity (l) with reheating of boiler/withdrawal rate l/min 240/15 340/15 520/25

*) As specified in German standard DIN 4701-10, not including the losses of connected pipes. These specifications are subject to change in respect of tolerances and technical modifications whichthe manufacturer reserves the right to make without notice.

1) Performance data for other operating conditions and boiler output values can be found in the Paradigma design handbook.

22

AquaPackage DealsSummary of available package deals

AquaPackage Deals CPC Allstar CPC Star azzurro CPC/TITAN CPC/OPTIMA

Application hot water heating hot water heating hot water heating hot water heating (+ heating support) + partial solar heating + partial solar heating + partial solar heating

Package types (quantity) upgrade packages (6), upgrade packages (15), complete packages (12) complete packages (12) complete packages (6) complete packages (15)

Number of persons 2 – 4 persons 2 – 8 persons 2 – 8 persons 2 – 8 persons

Heat transfer medium water water water water

Heating connection - direct feeding return-flow boost, buffer principle with tuning kit buffer principle

CPC collector CPC 32/40 Allstar CPC 14/21/30/45 CPC 21/45 Star azzurro CPC 21/45 Star azzurro Star azzurro

No. of modules 1 1 – 2 (3) 2 – 3 2 – 3

Aperture surface area [m2] 3.2 / 4.0 3.5 / 4.5 / 4.7 / 6.0 / 7.0 7.0 / 9.0 / 10.5 / 13.5 7.0 / 9.0 / 10.5 / 13.5extendible

Dimensioning WW = No.of people + 1aperture surface area [m2] WW = No.of people + 1 HU = 1.5 x No.of people + 1 TSH = 2 x No.of people + 1 TSH = 2 x No.of people + 1

Installation on-roof/flat roof/wall on-roof/flat roof/wall on-roof/flat roof/wall on-roof/flat roof/wall

Storage tank Aqua 190 (optional) Aqua 290/390/490 TITAN Aqua 400/600/850 OPTIMA Aqua (optional) 500/800/1000

Capacity 190 l 316 l / 410 l / 470 l 385 l / 642 l / 836 l 550 l / 830 l / 990 l

Tank capacity [l/m2] ≥ 40 l/m2 ≥ 40 l/m2 approx. 60 l/m2 approx. 80 l/m2

Solar station STAqua STAqua STAqua STAqua

Solar controller SystaSolar Aqua SystaSolar Aqua SystaSolar Aqua SystaSolar Aqua

Extension - tuning kit heating heating controller heating controller extension kit CPC SystaComfort as SystaComfort as

wall solution / wall solution /boiler with controller boiler with controller

SystaComfort SystaComfort

Not supplied, solar pipework solar pipework solar pipework solar pipework however required SPEED Cu 12 SPEED Cu 12 / Cu 15 SPEED Cu 12 / Cu 15 SPEED Cu 12 / Cu 15

or or or or solar corrugated pipe solar corrugated pipe solar corrugated pipe solar corrugated pipe

SPEED DN 10 SPEED DN 12 /DN 16 SPEED DN 12 /DN 16 SPEED DN 12 /DN 16

Hydraulic example

WW= Aperture surface for hot water heating, HU = Aperture surface for hot water heating and heating support, TSH = Aperture surface for hot water heating and partial solar heating.

Technical data – SystaSolar Aqua

Outer dimensions (H x W x D) 130 x 153 x 49 mm

Ambient temperature 0 °C to 50 °C

Switching capacity of outputs 230 V 1 A

Power consumption 2.5 VA

Protection degree IP 40 according to EN 60529-1

Protection class II according to EN 60730-1

Test for CE conformity

Power reserve of clock 10 years

Sensor cable max. 130 m, 2 * 0.75 mm2

Connection heating controller and

solar controller total length of bus max. 30 m, 2 * 0.75 mm2

Fuse microfuse 3.15 AT

23

Solar controller and stationSolar controller SystaSolar, SystaSolar Aqua and single-string solar station STAqua

SystaSolar and SystaSolar Aqua solar controller

Whether you are using a conventional solar energy system or the innovative AquaPackage Deals:

The SystaSolar and SystaSolar Aqua solar controllers ensure the safe operation and high efficiency of

your solar energy system:

- Feed-in function for power-saving solar pump operation

- Extensive functional checks with optical and acoustic signalling of potential malfunctions

- Determining the solar power and yield

- Easy to operate with 6 large buttons and plain text menu

- Illuminated, easy-to-read display

- Solar yield and potential malfunctions of the solar energy system displayed on the operating unit of

the heating controller

Single-string solar station STAqua

The Paradigma STAqua solar station is fast and easy to assemble and provides a high degree of

functional reliability due to:

- Precision-engineered multifunctional components

- Low number of seals and joints

- High quality sealing materials

- Safety valve certified as “Solar”

- Extremely reliable connections using 15 mm or 12 mm metal compression ring fittings

- Low heat loss by using a compact, encapsulated insulation shell made from water vapour expanded

polypropylene (EPP)

- Powerful solar pump with high head height

Technical data – Solar station Aqua

Outer dimensions (H x W x D) 328 x 200 x 178 mm

Weight 4.4 kg

Total capacity 0.04 l

Max. constant operating temperature 110 °C

Safety valve 1/2”, 4 bar, “Solar”

Distance from wall to centre of pipe 58 mm

Flow/return connection Cu 15 mm compression fitting/

Cu 12 mm compression fitting

Pump Grundfos UPS 15-60 Solar 230 V, 50 Hz

Total length of pump 130 mm

Pump connections 1”

Flow meter 0.5 – 7 l/min.

Pressure gauge 0 – 10 bar

paradigma solar heating systems - solazyn corporation- … · all this is done by your solar...

Documents