Par cipant Handbook

Shu ering Carpenter - System

SectorConstruc on

Sub-SectorReal Estate and Infrastructure Construc on

Occupa onSHUTTERING CARPENTRYReference ID: CON/Q0304, Version 1.0NSQF Level 4

Published by

All Rights Reserved,First Edi on, March 2016

Copyright © 2016Construc on Skill Development Council of IndiaSector Skill Council Contact Details:Address: 204, Aashirwad Complex, D-1, Green Park, New Delhi – 110016Email: standards@csdcindia.orgPhone: +91-11-46584466

DisclaimerThe informa on contained herein has been obtained from sources reliable to Construc on Skill Development Council. Construc on Skill Development Council disclaims all warrantees to the accuracy, completeness or adequacy of such informa on. Construc on Skill Development Council shall have no liability for errors, omissions, or inadequacies, in the informa on contained herein, or for interpreta ons thereof. Every effort has been made to trace the owners of the copyright material included in the book. The publishers would be grateful for any omissions brought to their no ce for acknowledgements in future edi ons of the book. No en ty in Construc on Skill Development Council shall be responsible for any loss whatsoever, sustained by any person who relies on this material. The material in this publica on is copyrighted. No parts of this publica on may be reproduced, stored or distributed in any form or by any means either on paper or electronic media, unless authorized by the Construc on Skill Development Council.

iii

iv

Acknowledgements

The Par cipant Handbook for Shu ering carpenter-System is an outcome of dedicated hard work done by Standards & Research team, construc on Skill Development Council of India.

We are thankful to NSDC for entrus ng us with this task of development of Shu ering carpenter - system Handbook.

The team owes a special gra tude to L&T, HCC, Shapoorji Pallonji Engineering & Construc on and other stakeholders for their dedicated and con nued technical support.

We also acknowledge Stellar Ventures (P) Ltd. for providing photographic support for this book.

CEO

CSDCI

v

About this book

Symbols Used

!

Time Tips NotesStepsKey Learning Outcomes

Unit Objec ves

Construc on industry is the second largest employer in India. As one of the leading avenues for employment in the country, the role played by this industry in the economic development of India is pivotal. However, despite its vast poten al, the construc on Industry faces a key challenge of shortage of skilled manpower. This hampers the progress of the industry, as the quality of constructed structure is poor and most projects failed to get completed within melines. There is a vast diff erence between the required skill and available skills of workers in the industry today. To reduce the skill gap, appropriate skilling of workforce needs to be carried out. This will not only empower the worker but also benefi t the construc on industry in terms of quality and produc vity. This Par cipant book is developed to impart training for the skill and knowledge required to work as a Shu ering Carpenter-system in construc on industry. It is designed based on Shu ering Carpenter-System Qualifi ca on Pack under the Na onal skill qualifi ca on framework. It comprises of the following NOS/ topics.

• Make wooden shu ers used in shu ering carpentry• Assemble and dismantle system formwork for RCC structures• Carry out quality checks for shu ering works• Work eff ec vely in a team to deliver desired results at the workplace• Plan and organize work to meet expected outcomes• Work according to personal health, safety and environment protocol at construc on site

This book is designed considering the lower educa onal background of the construc on worker. Therefore, special eff orts have been made to explain the concept required for the job mostly through photos and illustra ons.

About this book

Par cipant Handbook

vi

Table of Contents

S.No. Modules and Units Page No.

1. Introduc on 1

Unit 1.1 – Overview of Construc on Industry In India 3

Unit 1.2 – Major Occupa on In Construc on Sector 8

Unit 1.3 – Shu ering Carpenter - System As a Job Role 12

Unit 1.4 – Training For Shu ering Carpenter - System 16

2. Generic Mathema cal Skills 19

Unit 2.1 – Unit Conversion And Measurement 21

Unit 2.2 – Basic Geometrical Shapes And Its Proper es 25

Unit 2.3 – Pythagoras Theorem And Its Applica on 32

3. Work According To Personal Health, Safety And Environment Protocol At Construc on Site (CON/N9001) 35

Unit 3.1 – Importance of Safety At Construc on Site 37

Unit 3.2 – General Safety At Site 40

Unit 3.3 – Safety Relevant To Shu ering Carpenter-System Job 55

Unit 3.4 – Repor ng Procedure To Concerned Authority About 63

Unit 3.5 – Housekeeping And Waste Disposal At Site 65

4. Tools And Materials Required By Shu ering Carpenter-System (CON/N0302) 71

Unit 4.1 – Hand Tools And Power Tools Used In Shu ering Carpentry works 73

Unit 4.2 – Measuring Instruments Used By Shu ering Carpenter-System 87

Unit 4.3 – Handling And Maintenance of Tools 93

Unit 4.4 – Shu er Panel Materials 95

5. Making of Shu er Panels (CON/N0302) 105

Unit 5.1 – Wood Joints In Shu ering Carpentry 107

Unit 5.2 – Make Shu er Panels For Column 109

6. Assemble And Dismantle System Formwork (CON/N0303) 113

Unit 6.1 – Introduc on To System Formwork 115

vii

Shu ering Carpenter-System

Unit 6.2 – Assemble And Dismantle System Formwork 149

Unit 6.3 – Assemble And Dismantle Aluminium Formwork 164

Unit 6.4 – Stripping Time of Formwork 172

Unit 6.5 – Repair of Shu er Panel 174

Unit 6.6 – Stacking And Storing of Formwork Component 178

7. Quality Checks on Shu ering Works (CON/N0304) 181

Unit 7.1 – Carry Out Quality Check For Shu ering Works 183

Unit 7.2 – Checks on Foo ngs, Column, Wall Beams And Slab Formwork 187

8. Working Effec vely In a Team (CON/N8001) 195

Unit 8.1 – Effec ve Communica on With Others 197

Unit 8.2 – Working In a Team 205

9. Plan And Organize Work To Meet Expected Outcomes (CON/N8002) 209

Unit 9.1 – Priori es Work Ac vi es To Achieve Desired Results 211

Unit 9.2 – Organizing Resources 215

10. Employability & Entrepreneurship Skills 219

Unit 10.1 – Personal Strengths & Value Systems 223

Unit 10.2 – Digital Literacy: A Recap 242

Unit 10.3 – Money Ma ers 248

Unit 10.4 – Preparing For Employment & Self Employment 259

Unit 10.5 – Understanding Entrepreneurship 268

Unit 10.6 – Preparing To Be An Entrepreneur 290

Par cipant Handbook

viii

Par cipant Handbook

308308

Notes