panel mount version a15-76 turbidity monitor...ati-0241 model a15/76 turbidity monitor - optional...

of 14

ATI

PANEL MOUNT VERSION

1) Panel Mount Enclosure Material:Aluminum, Black Anodized

2) Nema-4X Encloure Material:Base: Molded ABS, (tan in color)Cover: Clear Polycarbonate with

dual hinge.

3) Nema-4X Rating:

NEMA rated types 4,4XIEC 529 rated IP66Flammibility Rating UL94 HB

NOTESNEMA-4X VERSION

3.54"89.9mm

6.10"154.9mm

5.46"138.7mm.34"

8.6mm

3.78"96mm

3.78"96mm

Enclosure Dimensions

ATI-0124

ATI-010

Model A15/76 Turbidity Monitor -

SS-A1576, Rev-E (8/11)

of 14

ATI

NOTESJUNCTION BOX

1) Nema-4X Encloure Material:Molded FRP (Fiberglas reinforcedpolyester),gray in color.

2) Nema-4X Rating:

UL listed per std. 508CSA certified per std. C22.2 No. 94NEMA rated types 4,4X,6,6P,12,13CEMA rated types 2,3,4 and 5IEC 529 rated IP 67-11

3) Mounting Dimensions:

3.11" [79mm] x 3.11" [79mm]

4) Part No. 00-0726.

ATI-0241

Optional Equipment DimensionsModel A15/76 Turbidity Monitor -

RE (8/11)

of 14

ATI

NOTES

1) Front of panel is NEMA 1, general purposeonly.

2) Panel mounting clips supplied with monitor.

3.60"91.4mm

3.60"91.4mm

MOUNTING CLIPS(2 PER UNIT)PANEL CUT-OUT

WALL MOUNT - NEMA-4X

HANDRAIL MOUNT - NEMA-4X

1) Wall mounting requires customer suppliedscrews or bolts.

1) All listed hardware is supplied as part ofhandrail mounting kit # 00-0139.

PANEL MOUNT

Installation Diagrams

ATI-0125

ATI-0126

ATI-043


RE (8/11)

of 14

ATI

A15/76 TURBIDITY MONITOR (VAC) ELECTRICAL CONNECTIONS

A15/76 TURBIDITY MONITOR(BACK VIEW)

ATI-0443

Terminal Block DesignationsModel A15/76 Turbidity Monitor -

RE (8/11)

of 14

ATI

A15/76 TURBIDITY MONITOR (VDC) ELECTRICAL CONNECTIONS

A15/76 TURBIDITY MONITOR(BACK VIEW)

RE (8/11)

of 14

ATI

SYSTEM WIRING DIAGRAM w/OPTIONAL JUNCTION BOX

ATI-0445


RE (8/11)

Wiring Diagrams

of 14

ATI

FLOW SENSOR DIMENSIONS

Sensor Dimensions and Installation

ATI-0434

FLOWCELL DIMENSIONS

ATI-0435


RE (8/11)

of 14

ATI

FLOWSENSOR/FLOWCELL INSTALLATION DRAWING

Sensor Dimensions and Installation

ATI-0444

Installation of flowcell must be done Horizontally as shown above.


RE (8/11)

of 14

ATI Sensor Installation

TURBIDITY SENSOR 1½ FLOW TEE ASSEMBLY

VERTICAL CONFIGURATION IS RECOMMENDEDBUT HORIZONTAL CONFIGURATION IS ACCEPTABLE,PROVIDED SENSOR IS MOUNTED IN THE 3:00 OR 9:00POSITION.

ATI-0542


RE (8/11)

of 14

ATI Sensor Installation

FLOW "T" RECOMMENDED PIPING

ATI-0513


RE (8/11)

of 14

ATI

RE (8/11)

D15/76 AUTO-CLEAN TURBIDITY MONITOR

1) Nema-4X Encloure Material:Base: Molded ABS, Tan in ColorCover: Clear Lexan w/Dual Hinge

2) Nema-4X Rating:Nema rated types 4, 4XIEC 529 rated IP66

3) Sensor Material:Noryl EN265 & Stainless Steel

NOTES

AUTO-CLEAN TURBIDITY SENSOR

Dimensions

ATI-0553

ATI-0473

Model D15-76 Auto-Clean Turbidity Monitor -

of 14

ATI

NOTESMONITOR HANDRAIL INSTALLATION

1) Always mount sensor cleaner within 25 ft. ofsensor if possible. Maximum air line distanceis 50 ft.

2) Sun shade over monitor is recommended inhot climates.

3) Monitor Handrail Mounting Kit # 00-0930supplies all hardware listed for mountingmonitor.

4) Wall mounting requires customer suppliedscrews or bolts.

5) Sensor Pipe Mounting Kit # 00-0624 suppliesmounting plate with hardware and PVC pipemounting adaptor.

6) Sensor Pipe Mounting Kit with Rag Shedder# 00-0629 supplies mounting plate withhardware and PVC rag shedder.

SENSOR HANDRAIL INSTALLATION

RE (8/11)

Installation Diagrams

ATI-0490


of 14

ATI

STANDARD SYSTEM WIRING DIAGRAM

RE (8/11)

System Interconnections

ATI-0534


of 14

ATI

REMOTE MONITOR WIRING DIAGRAM

RE (8/11)

System Interconnection

ATI-0536


panel mount version a15-76 turbidity monitor...ati-0241 model a15/76 turbidity monitor - optional...

Documents