pallet jacks - lift depot ltd.liftdepot.com/.../2015/10/clark_palletjackfullline.pdf · the cj22s...
TRANSCRIPT
PALLETJACKS
www.clarkmhc.com/parts/handpallet 877-662-5275
WE’VE GOTCHA COVERED
FREEZER & COLD STORAGE
BEVERAGE BOTTLING & DISTRIBUTION
FOOD PROCESSING & DISTRIBUTION
AGRICULTURAL
GROCERY
GENERAL WAREHOUSING
MANUFACTURING
LUMBER
RETAIL
PAPER/PRINTING
PHARMACEUTICAL
CHEMICAL
TRUCKING
www.clarkmhc.com/parts/handpallet 877-662-5275
STANDARD ON EVERY JACK1- YEAR REPLACEMENT WARRANTY
2-YEAR LIMITED PUMP WARRANTY
FULLY SERVICEABLE PUMPS
HEAVY DUTY STEEL FRAMES
3-POSITION ERGONOMIC HANDLES
FULLY ADJUSTABLE PUSH RODS
SERVICEABLE ZERK FITTINGS
STEER TIRES
AVAILABLE OPTIONSAUTOMOTIVE BRAKE ATTACHMENT
3 SIZES OF LOAD BACKRESTS
NYLON & STEEL WHEELS
TANDEM LOAD WHEELS
STANDARDJACKS
STANDARD PALLET JACK
Standard FeaturesFrame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Paint• The CJ55 series boasts a quality Powder Coat finish.Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.Control Handle• The control handle has three positions (raise/neutral
lower) fingertip control. Ergonomically designed and free of pinch points.
Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 10 strokes to raise the forks to the maximum lift.
Load Rollers• Features 2.9” polyurethane rollers with sealed bearings.Steering• Featuring 200 degree pivot action for greater
maneuverability with 7” polyurethane wheels, sealed bearings and “Ball-Thrust” steering.
Push Rods• The adjustable push rods allow for individual adjustment
capability of either fork height.Hangers• The one piece hangers are constructed of Iron Cast for
greater strength and longevity.Helper Rollers• Features 4 helper rollers for easy exit and entry of pallets.Pivot Points• The CJ55 features grease fittings and bushings at all pivot
points for easy maintenance.Options• Automotive Brake Attachment - CJ55A• Tandem Wheels - CJ55T• Nylon Wheels• Steel Wheels
DescriptionDurable, versatile and easy to use the CJ55 features an ergonomic design that reduces operator fatigue and downtime. A 200 degree handle pivot provides exceptional maneuverability in compact areas and comes with standard polyurethane wheels and rollers for rolling ease. The CJ55T has tandem load rollers and the CJ55A comes with the Automotive Brake Attachment.
Specifications CJ55/T/A
Load Capacity 5500 lbs.
Fork Length 48”
Overall Fork Widths 20.5”/ 27”
Lowered Fork Height 2.9”
Raised Fork Height 7.8”
Fork Width 6.5”
Weight 170 lbs.
Steer Wheels 7”
Load Rollers 2.9” x 3.6”
Wheels/Rollers Polyurethane
CJ55CJ55TCJ55A
www.clarkmhc.com/parts/handpallet 877-662-5275
QUICKLIFTJACKS
QUICK LIFT PALLET JACK CJ55Q
Standard FeaturesFrame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Paint• The CJ55Q boasts a quality Powder Coat finish.Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Pivot Points• The CJ55Q features grease fittings and bushings at all
pivot points for easy maintenance.
Load Rollers• Features 2.9” polyurethane rollers with sealed bearings.Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 5 strokes to raise the forks to the maximum lift for loads under 650 lbs. and 10 strokes for loads over 650 lbs.
Steering• Featuring 200 degree pivot action for greater
maneuverability with 7” polyurethane wheels, sealed bearings and “Ball-Thrust” steering.
Push Rods• The adjustable push rods allow for individual adjustment
capability of either fork height.Hangers• The one piece hangers are constructed of Iron Cast for
greater strength and longevity.Helper Rollers• Features 4 helper rollers for easy exit and entry of pallets.Options• Automotive Brake Attachment• Tandem Wheels
DescriptionThe CJ55Q Quick Lift Pallet Jack is the ideal truck for light load lifting and fast paced applications. When lifting loads under 650 lbs. it requires only 5 strokes to reach maximum height. And for loads over 650 lbs. the special hydraulic system automatically switches to a normal operating mode of 10 strokes to reach maximum height.
Specifications
Load Capacity 5500 lbs.
Fork Length 48”
Overall Fork Widths 20.5”/ 27”
Lowered Fork Height 2.9”
Raised Fork Height 7.8”
Fork Width 6.5”
Weight 170 lbs.
Steer Wheels 7”
Load Rollers 2.9” x 3.6”
Wheels/Rollers Polyurethane
www.clarkmhc.com/parts/handpallet 877-662-5275
LOWPROFILEJACKS
Specifications CJ22SL CJ33L CJ33M4*
Load Capacity 2200 lbs. 3300 lbs. 3300 lbs.
Fork Length 48” 48” 48”
Overall Fork Widths 20.5”/ 27” 20.5”/ 27” 32”
Lowered Fork Height 1.375” 2” 2”
Raised Fork Height 4” 5.5” 5.5”
Fork Width 6.5” 6.5” 6.5”
Weight 170 lbs. 170 lbs. 180 lbs.
Steer Wheels 6” 6” 6”
Load Rollers 1.375” 2” 2”
Wheels/Rollers Poly/Steel Poly/Steel Poly/Steel
LOW PROFILE PALLET JACK CJ22SLCJ33L
CJ33M4
Standard FeaturesFrame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Paint• All of the Low Profile Pallet Jacks boast a quality Powder
Coat finish.Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 10 strokes to raise the forks to the maximum lift.
Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Load Rollers• Features 2” steel rollers with sealed bearings.Steering• Featuring 200 degree pivot action for greater
maneuverability with 6” polyurethane wheels, sealed bearings and “Ball-Thrust” steering.
Push Rods• The adjustable push rods allow for individual adjustment
capability of either fork height.Hangers• The one piece hangers are constructed of Iron Cast for
greater strength and longevity.Pivot Points• The CJ22SL, CJ33L & CJ33M4 features grease fittings
and bushings at all pivot points for easy maintenance.
DescriptionThe CJ22S (super low) & CJ33L (low) Profile Pallets Jacks feature lowered heights for handling conventional pallets, skids and containers that are too low for the standard 2.9" lowered height of a standard pallet jack. The CJ33M4 (4-way) is designed to handle 4-way pallets at the same lowered heights and wider widths. All offer the same durability and versatility and ease of use as the standard CJ55.
*CJ33M4 NOT SHOWN
www.clarkmhc.com/parts/handpallet 877-662-5275
WEIGHSCALEJACKS
WEIGH SCALE PALLET JACK CJ44WCJ44WA
Standard FeaturesFrame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Paint• The CJ44W boasts a quality Powder Coat finish.Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Load Rollers• Features 2.75” polyurethane rollers with sealed bearings.
Rechargeable Battery Pack• Rechargeable battery pack built into the LCD readout
panel. Readout panel has a standard 110 V plug in capability (the plug in cord comes standard with the unit as well) so they can use either battery or AC power. Also standard is a built in charger that charges the battery pack whenever the unit is plugged in.
Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 10 strokes to raise the forks to the maximum lift. Steering• Featuring 200 degree pivot action for greater
maneuverability with 6.3” polyurethane wheels, sealed bearings and “Ball-Thrust” steering.
Push Rods• The adjustable push rods allow for individual adjustment
capability of either fork height.Hangers• The one piece hangers are constructed of Iron Cast for
greater strength and longevity.Helper Rollers• Features 4 helper rollers for easy exit and entry of pallets.Pivot Points• The CJ44W features grease fittings and bushings at all
pivot points for easy maintenance.Options• CJ44WA adds an Automotive Brake Attachment to the
CJ44W.
DescriptionThe CJ44W & CJ44WA Manual Weigh Scale Pallet Jacks enable the operator to easily lift, weigh (to 99.9% accuracy) and transport loads. The easy to read meter features a large LCD display for better visibility, keypad and automatic tare functions. The readout is available in pounds or kilograms. Can be used with internal rechargeable battery source or external AC input.
Specifications
Load Capacity 4500 lbs.
Fork Length 45”
Overall Fork Widths 21.5”/ 27.75”
Lowered Fork Height 3”
Raised Fork Height 7.75”
Fork Width 6.5”
Weight 170 lbs.
Steer Wheels 6.25” x 2”
Load Rollers 2.75” x 3.6”
Wheels/Rollers Polyurethane
www.clarkmhc.com/parts/handpallet 877-662-5275
GALVANIZEDJACKS
Specifications
Load Capacity 5500 lbs.
Fork Length 48”
Overall Fork Widths 20.5”/ 27”
Lowered Fork Height 2.9”
Raised Fork Height 7.8”
Fork Width 6.5”
Weight 170 lbs.
Steer Wheels 7”
Load Rollers 2.9” x 3.6”
Wheels/Rollers Nylon
Standard FeaturesGalvanized Frame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Galvanized Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Galvanized Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
Galvanized Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 10 strokes to raise the forks to the maximum lift.
Steering• Featuring 200 degree pivot action for greater
maneuverability with 7” nylon wheels, sealed bearings and “Ball-Thrust” steering.
Load Rollers• Features 2.9” nylon rollers with sealed bearings.Galvanized Push Rods• The adjustable push rods allow for individual adjustment
capability of either fork height.Galvanized Hangers• The one piece hangers are constructed of Iron Cast for
greater strength and longevity.Helper Rollers• Features 4 helper rollers for easy exit and entry of pallets.Pivot Points• The CJ55G features grease fittings and bushings at all
pivot points for easy maintenance.Options• Automotive Brake Attachment• Tandem Wheels
GALVANIZED PALLET JACK CJ55G
DescriptionWhether i t is a C lean-Room or Cold-Room environment, or a highly corrosive chemical application, the CJ55G Galvanized Pallet Jack will do the job. Ideal for use in freezers or coolers with temperatures down to -10 degrees F, as well as chemical exposure applications, the CJ55G is hygienic, durable, easy to clean and built for the ultimate in Corrosion Resistance.
www.clarkmhc.com/parts/handpallet 877-662-5275
STAINLESSSTEELJACKS
STAINLESS STEEL PALLET JACK CJ55S
Standard FeaturesStainless Steel Frame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Stainless Steel Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Stainless Steel Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
Stainless Steel Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 10 strokes to raise the forks to the maximum lift.
Steering• Featuring 200 degree pivot action for greater
maneuverability with 7” nylon wheels, sealed bearings and “Ball-Thrust” steering.
Load Rollers• Features 2.9” nylon rollers with sealed bearings.Stainless Steel Push Rods• The adjustable push rods allow for individual adjustment
capability of either fork height.Stainless Steel Hangers• The one piece hangers are constructed of Iron Cast for
greater strength and longevity.Helper Rollers• Features 4 helper rollers for easy exit and entry of pallets.Pivot Points• The CJ55G features grease fittings and bushings at all
pivot points for easy maintenance.Options• Automotive Brake Attachment• Tandem Wheels
DescriptionWhether it is a Clean-Room or Cold-Room environment, or a highly corrosive chemical application, the CJ55S Stainless Steel Pallet Jack will do the job. Ideal for Chemical manufacturers, Pharmaceutical companies, Food Processing companies and Fisheries, the CJ55S is hygienic, durable, easy to clean and built for the ultimate in Corrosion Resistance.
Specifications
Load Capacity 5500 lbs.
Fork Length 48”
Overall Fork Widths 20.5”/ 27”
Lowered Fork Height 2.9”
Raised Fork Height 7.8”
Fork Width 6.5”
Weight 170 lbs.
Steer Wheels 7”
Load Rollers 2.9” x 3.6”
Wheels/Rollers Nylon
www.clarkmhc.com/parts/handpallet 877-662-5275
SCISSORLIFTJACKS
Specifications
Load Capacity 2200 lbs.
Fork Length 45”
Overall Fork Widths 20.5”/ 27”
Lowered Fork Height 3.3”
Raised Fork Height 31.5”
Fork Width 6.3”
Weight 375 lbs.
Casters 7” x 2”
Load Rollers 3” x 2”
Load Center 22.5”
Overall Length 60”
Turning Radius 53.5”
Standard FeaturesFrame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Paint• The CJ22XM boasts a quality Powder Coat finish.Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
• The triple stage piston rod design provides rigidity and light pumping force.
• The pump is designed with a Quick-Lift function that doubles the lifting speed when lifting loads less than 500 lbs.
Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 18 strokes to raise the forks to the maximum lift.Handle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.
Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Steering• Featuring 150 degree pivot action for greater
maneuverability with 7” polyurethane swivel casters providing maximum rolling ease and maneuverability in tight areas.
Load Rollers• The durable 3” polyurethane rollers are situated in the
scissor legs for easy mobility.Brakes• The self adjusting stabalizers are automatically applied
when lifting loads higher than 15.75" which ensures that the load will remain stable particularly when using the truck as a work positioner.
Scissor Legs• The extra long steel scissor legs provide extra stability
particularly when handling unevenly loaded skids.
MANUAL HI-RISE SCISSOR LIFT CJ22XM
The CJ22XM Manual Hi-Rise Scissor Lift is designed to handle applications such as lifting and transporting skids and bottomless containers, loading and unloading conveyor systems, and is also perfectly suited as a mobile work station.
Built to work like a Stacker and a Pallet Truck combined, the ergonomic design of the CJ22XM enables the operator to place the load at the required work height thereby eliminating bending and back injuries which results in reduced costly workman compensation claims.
www.clarkmhc.com/parts/handpallet 877-662-5275
SCISSORLIFTJACKS
Specifications
Load Capacity 2200 lbs.
Fork Length 49”
Overall Fork Widths 21.5”/ 27”
Lowered Fork Height 3.3”
Raised Fork Height 31.5”
Fork Width 6.3”
Weight 400 lbs.
Casters 7” x 2”
Load Rollers 3” x 2”
Load Center 24.5”
Overall Length 65”
Turning Radius 48.25”
Battery 12V / 100Ah
Charger 12V / 10A
BATTERY HI-RISE SCISSOR LIFT CJ22XB
Standard FeaturesFrame• Rugged Heavy Duty Frame constructed of one-piece
formed channel steel offering light weight strength.Forks• Reinforced for added strength with tapered ends for easy
pallet entry.Paint• The CJ22XB boasts a quality Powder Coat finish.Hydraulic Pump• Quality design complete with a special lowering valve
allowing controlled rate of descent, and an overload by-pass valve.
• The two stage piston rode design ensures stability in the raised position.
Scissor Legs• The extra long steel scissor legs provide extra stability
particularly when handling unevenly loaded skids.Pump Stroke• Features a full 90 degree top to bottom stroke requires
only 18 strokes to raise the forks to the maximum liftHandle• Featuring a reinforced base, the spring-a-matic handle
returns to the upright position automatically.
Control Handle• The control handle has three positions (raise/neutral/
lower) fingertip control. Ergonomically designed and free of pinch points.
Steering• Featuring 150 degree pivot action for greater
maneuverability with 7” polyurethane swivel casters providing maximum rolling ease and maneuverability in tight areas.
Load Rollers• The durable 3” polyurethane rollers are situated in the
scissor legs for easy mobility.Brakes• The self adjusting stabalizers are automatically applied
when lifting loads higher than 15.75" which ensures that the load will remain stable particularly when using the truck as a work positioner.
Charger• Features an external 12 volt charger that plugs into any
standard 110 volt outlet.Battery Lift Operation• Raises the truck (empty) to the maximum height in
approx. 15 seconds.
The CJ22XB Battery Hi-Rise Scissor Lift features manual push – battery lift operation and is designed to handle applications such as lifting and transporting skids and bottomless containers, loading and unloading conveyor systems, and is also perfectly suited as a mobile work station.
Built to work like a Stacker and a Pallet Truck combined, the ergonomic design of the CJ22XB enables the operator to place the load at the required work height thereby eliminating bending and back injuries which results in reduced costly workman compensation claims.
www.clarkmhc.com/parts/handpallet 877-662-5275
• We don’t just build forklifts. As a company, we are also focused on providing our customers with the best possible technical service support and aftermarket parts available.
• Even though our business starts with a quality, cost-e f f e c t i v e p r o d u c t , o u r organization understands that it is the support and services we provide after the sale that help keep your business running at peak efficiency.
• THE CLARK PartsPRO® SYSTEM is our industry-leading electronic parts and service documentation tool that provides dealers with a quick and accurate method of identifying parts for every CLARK forklift built since 1961. PartsPRO® ensures the availability of the most current technical information and has the unique capability to create parts manuals specific to your mixed CLARK fleet, making it simple to positively identify and order the correct part(s) from your local CLARK dealer. The right CLARK part —
The First Time, Every Time.
• U N R I V A L E D P A R T S SUPPORT Our Aftermarket Distribution Center provides par ts to over 250 North American CLARK dealers and many international dealers. This CLARK operated 184,000 square foot facility is dedicated to supporting the CLARK models built over the last 90 years. This facility is focused on providing excellent off-the-shelf availability, quality parts, quick response time and competitive pricing.
DEPENDABLE PARTS = DEPENDABLE TRUCKS
PALLET JACK BROCHURE
© 2010 CLARK Material Handling Company
CLARK MATERIAL HANDLING COMPANYNorth American Headquarters700 Enterprise Drive • Lexington, KY 40510877-662-5275 • www.clarkmhc.com
®
To Find Your Nearest Authorized CLARK Dealer, Visit Our Website www.clarkmhc.com