page 68 • april 11, 2015 • ...archive.constructionequipmentguide.com/web_edit/midwest/-...
TRANSCRIPT
Page 68 • April 11, 2015 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide
HIGHEST QUALITY... LOWEST PRICES!
Go to www.hhfab.com to see our complete line.
Dirt BucketVarious Sizes, All Buckets
Made From 1/4” Plate Steel.
Low Profile 3/4” x 6” Cutting
Edge
Tiger Claw
• Available in 84”, 96” and 108”
• Constructed of 1/4” Plate Steel
• 3/4” x 6” Bolt on Cutting Edge
• Various Tractor and Loader
Mounts Available
• Four to Five Wear Plates
Depending on Size
• 80” Grapple Opening
Rock Bucket58”, 70” Or 80” Standard
Size. 2 3/4’ Spacing
Between Rods, 1” Thick
Cutting Edge
Big RipperGreat For Rocks,
Stumps or Trenches,
36” Available.
Root Grapple62” or 84” Standard Size or
Custom Built.Complete With
Double Hydraulics. 62” Available In
Single Grapple.
Bucket Curved-Tine
Grapple60”, 66”, 72” and 80” Standard Sizes.
Complete with single hydraulic
cylinder & hoses. Tines are 24”
forged curved tines w/ sleeves.
Bucket Grapple60”, 72” Or 80” Standard or
Custom Built. Complete With
Double Hydraulics, 60”
Available In A Single
Grapple.
Material Fork Curved
Tine Grapple60”, 66”, 72” or 80” Standard or Custom
Built. Complete with single hydraulic
cylinder & hoses. Ideal for manure,
bedding & grabbing round bales.
Snow Bucket6’, 7’, 8’, 9’ and 10’
widths with mesh.
Height 32” Depth
36”. Bucket con-
structed of 1/4” steel
shell. Cutting edge 3/4”‘x 6”.
Bolt-on cutting edge also available.
Hydraulic Tree
& Root PullerComes Complete
With Hydraulic
Cylinder. Pulls Up To 8”
Trees
Back HoeComplete With
Hydraulics, 20” Bucket
Standard, Different
Sizes Available. Digs 7
1/2’ Deep.
Wood Splitter4” x 36” hydraulic cylinder.
Splitting force of 20 ton at
3000 PSI. Split wood from
your skid steer cab!
Brush DevilAvailable In 60” Or 72” Heavy Duty
Gear Box. Front And Rear
Chain Guards. Requires
15 To 20 Gal. Per Minute.
Double Industrial Tine GrappleComplete With
Hydraulics,
1 7/8”
Round
Stress
Shaft
Tines.
Rock Bucket Grapple
58”, 70” or 80” Standard
Size. Complete With
Double Hydraulics. 58”
Available in A Single
Grapple
Made in the USA!
320-485-2341 • 877-823-3392Winsted, MN
Call For The Dealer Nearest You!
Leveling Bar
Auger(Orbit Drive)
Available In 6”, 9”,
12”, 15”, 18”, 24”
PTO AdapterIdeal for three point power take offequipment – snow blowers, mowers,tillers, post hole augers, etc.
Operates off ofthe skid steer hydraulics. Noneed to modifypower take offshafts.
Snow Blower66”,72” & 84”
All hydraulic
components
are Eaton
Complete
Hydraulic
System. Housing constructed of
3/16th “ High Strength Steel
WE HAVE BUCKETS & CONVERSION KITS FOR TRACTORS!
Quick
Hitch
NEW
Dealers Wanted
Pallet Fork1-3/8”x48” 1-
1/4” Rail 4,000
Lb Capacity