p1d series - parkercnc.com.mx p1d series is available with all the usual optional designs, such as:...

1 Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA

P1D SeriesISO 6431 / VDMA 24562 zc19

Pneumatic Cylinders

ContentsIndex ................................................................................... 2Features/Accessories ......................................................... 3P1D Standard Version ........................................................ 4P1D Removable Gland ...................................................... 6P1D Clean Version ............................................................. 8P1D Tie Rod ..................................................................... 10

Dimensions ....................................................................... 13Main Data/Piston Forces .................................................. 17Material Specification/Cushioning Diagram .................... 18Ordering Information ........................................................ 20Mountings ......................................................................... 22Accessories ...................................................................... 27

GR941312

Producción CNC, SA de CV Av. Pie de la Cuesta No. 1440 Local 2 Col. Amalia Solorzano Querétaro, Qro. CP 76130 Tel. (442) 253 7834 Fax. (442) 253 7997 www.parkercnc.com.mx

Pneumatic CylindersP1D Series

Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA

2

C086

Catalog AU03-0900P-2/NA

Index

Content Page

The P1D Cylinder Family ......................................................................................................................... 3

P1D Standard Version.............................................................................................................................. 4

P1D Removable Gland Version ............................................................................................................... 6

P1D Clean Version ................................................................................................................................... 8

P1D Tie-Rod Version ............................................................................................................................. 10

Optional Cylinder Versions ..................................................................................................................... 11

P1D Series with Rod-Lock .................................................................................................................... 12

Dimensions P1D Series with Rod-Lock ................................................................................................ 13

Dimensions P1D Standard .................................................................................................................... 14

Dimensions P1D Removable Gland Version ......................................................................................... 15

Dimensions P1D Clean, P1D Tie-Rod ................................................................................................... 16

General Specifications ........................................................................................................................... 17

Material Specification ............................................................................................................................. 18

Cushioning Diagram .............................................................................................................................. 18

Guide for Tubing and Valve Selection ..................................................................................................... 19

How to Order.......................................................................................................................................... 20

Cylinder Mountings ................................................................................................................................ 22

Piston Rod Mountings ............................................................................................................................ 27

3 and 4 Position Cylinders ..................................................................................................................... 30

ImportantBefore attempting any external or internal work on the cylinder orany connected components, make sure the cylinder is vented anddisconnect the air supply in order to ensure isolation of the air supply.

!

NoteAir quality is essential for maximum cylinder servicelife (see ISO 8573).

!

NoteAll technical data in this catalog are typical data only.



C086


The P1D Cylinder Family

Completely new ISO cylinder family, P1D

A completely new cylinder range from the ground up,with major investment in research, material andtechnology, demands long experience and majorresources. When we developed our new cylinder range,we started from scratch, but not really. Decades ofresearch and learning about what our customers reallyneed world-wide has given us a very stable foundationto start from.

The new P1D is a cylinder design of the highestpossible quality, every detail has been thought through,without making any compromises. It has a largenumber of innovations which could only be achieved byusing the best possible materials and methods. Theresult is a complete family of ISO/VDMA cylinders, ofwhich we are very proud.

The new Parker P1D is a high technology cylinderdesign for just about every conceivable application,both simple and highly complex.

The same high technology platform is used for severalmain versions:

• P1D Standard Version – the universal, generalpurpose cylinder with high performance and long life.

• P1D Removable Gland Version – the innovativedesign which saves space and reduces dimensionsby allowing connections to be made in the front or rearend of the cylinder.

• P1D Clean Version – the new product for ISO/VDMAcylinders featuring a clean design with a system ofintegrated, adjustable sensors (patent applied for), forstringent hygiene demands.

• P1D w/Rod Lock – a powerful device thatmechanically locks the piston-rod in both directionswhen air pressure is lost.



4

C086

P1D Standard VersionEntirely new, the innovative P1D Series is the newgeneration of ISO/VDMA cylinders from ParkerHannifin. The cylinders are double-acting, with a newdesign of air cushioning. The light, stiff body extrusionhas sensor grooves for simple and protected sensorinstallation.

Installation dimensions according tointernational standardsThe new P1D Series complies with the currentISO 6431, ISO/DIS 15552, VDMA 24562 andAFNOR installation dimensional standards for customerreassurance world-wide.

High technology designThe best materials, manufacturing methods and designof every detail have been carefully tested to give thebest possible product. The internal components aremade of high strength plastics, for quiet operation andlong service life. The aluminium end caps and the

torsionally stiff aluminium body extrusion make thecylinder robust and suitable for a wide range ofapplications.

High qualityThe P1D Series, as with other Parker cylinders,has been developed with quality in all phases –requirements, specification, design, planning,purchasing, production, distribution and service.

Even more functions and variantsThe P1D Series is available with all the usual optionaldesigns, such as: Through piston rod, high temperature,hydraulic operation, extended piston rod, etc.

Surface treatedsteel end covernuts for toughenvironments.Sealing plugs areavailable for all P1Dcylinders.

All seals are madefrom polyurethane,which gives P1Dcylinders extra longservice life.

P1D Standard has afurther developmentof our famous bodyextrusion withgrooves for the new“drop-in” sensors.

The cylinder endcovers do not have anycavities or pocketswhich could collectwater or dirt. Thisfacilitates effectivecleaning.

The body extrusion isanodized inside andoutside, for long lifeand low friction.

The cylindershave magneticpistons asstandard.Polyurethane end-

of-stroke bumpersgive smooth andquiet operation.

One piston rodnut accordingto ISO 439B isincluded asstandard.

P1D has a hard chrome-plated steel piston rod asstandard. Chrome-platedstainless steel is alsoavailable.

P1D Standard isdesigned entirely withoutcopper, PTFE andsilicone – decisive forcertain industries.

All P1D cylinders fornormal temperaturehave initial greasing of atransparent, non-toxicgrease, approved bythe food industry, whichis entirely free fromPTFE and siliconeinclusions.

The cushioning hasindividual flow geometryfor each cylinder size.This gives effectivecushioning which iseasier to set and adjust.


P1D Standard Version

High strengthbolt connectsthe piston tothe piston rodand securedin place withanaerobicadhesive.



C086



Complete accessory programThe P1D Series offers a complete ISO, VDMA andAFNOR compatible accessory program, with a widerange of piston rod and cylinder mountings for bothpivoted and fixed operation. Several of these types ofmountings are available in stainless steel. The new “drop-in” sensors are available with both reed and solid-stateoperation, with a wide range of connector types andcable lengths.

New, mechanically protected sensor technologyThe body extrusion has recessed sensor grooves onthree sides of the cylinder. The new sensors drop into thesensor groove quickly and easily. Both the cable and thesensor are protected. Choose a sensor with 3 or 10 mcable, 8 mm connector or the new M12 connector.

Optimized cushioningThanks to the plastic inserts in the end covers, eachcylinder bore has been given individual flow geometry.This provides optimized cushioning, which is quicker andeasier to set and adjust.

Smooth, quiet operation and long service lifeAll seals and end-of-stroke bumpers are made frompolyurethane (PUR), the bearings and piston are madefrom proven engineering plastics with excellent bearingproperties and all cylinders are greased at the factorywith a transparent, food-grade grease. Altogether thisgives the P1D Series very long service life and smooth,quiet operation.



6

C086

P1D Removable Gland VersionThe Removable Gland Version of the P1D hasprecision, lightweight aluminum end caps for thoseapplications that require a more robust design. Thisversion also offers a removable rod gland allowing forcomplete replacement of rod seals and/or rod bearingwithout disassembly.

High technology designStill based on the standard P1D design, you can cus-tomize your cylinder to the application with options ofa high strength plastic piston or a robust aluminumpiston that contains a wear-band, which eliminates anymetal-to-metal contact. Both pistons come standardwith a magnet for optional use of cylinder sensors.

Common design platformThe Removable Gland Version of the P1D has thesame technical platform as the standard P1D. The bestmaterials (e.g. – PTFE filled Bronze Rod Gland),manufacturing methods and the careful attention todetail give the P1D Removable Gland Version smooth,quiet operation and long service.

Installation dimensions according to internationalstandardsThe Removable Gland Version of the P1D complieswith the current ISO 6431, ISO/DIS 15552, VDMA24562 and AFNOR installation dimensional standardsfor customer reassurance world-wide.


P1D Removable Gland Version



C086



Removable GlandAn extra-long inboard bearing surface ensures lubricationfrom within the cylinder. Outboard of the bearing are twoleak-proof seals. The rod wiper seal wipes away any dirton the rod. This means less wear on bearing surfaces andinternal parts. The result is positive, no-leak sealing,regardless of conditions. And with the famous Parkerremovable style gland, you can replace the rod sealsand/or bearings when necessary without disassemblingthe rest of the cylinder and without the need of anyspecial wrenches.

Aluminum Piston OptionFor high temperature applications, an aluminum piston isavailable with fluorocarbon seals. The piston is threadedonto the piston rod and secured in place with anaerobicadhesive which is temperature sensitive. For applicationsabove +121°C (+250°F) specify a pinned piston to rodconnection. The polyurethane seals that are standard onthe nylon piston are also an available option with thealuminum piston. The magnet that is cleverly hiddenunderneath the wear-band is also a standard feature onthe aluminum piston. The durable wear-band preventsany metal-to-metal contact between the piston and thecylinder body wall increasing the overall life of thecylinder.

Machined End Caps with Captive Cushion ScrewAdjustmentThe end caps on the Removable Gland Version of theP1D are made of precision lightweight aluminum. Thisallows for maximum flexibility and quick response for anycustomization that is required. The end caps also featurea captive cushion needle valve adjustment screw foroptimized cushioning that is inherent throughout the P1Dfamily of ISO cylinders.



8

C086

P1D Clean VersionThe P1D Clean version is a new addition to our ISOcylinder system, completely designed for the foodindustry. Many years’ experience of the stringentrequirements for hygiene regarding choice of materialand corrosion resistance have guided the developmentof this cylinder version. Great emphasis has been puton careful design of the external parts of the cylinder,including choice of materials and corrosion protection.

Main dimensions according to internationalstandardsAll the main dimensions of the P1D Clean comply withISO 6431, ISO/DIS 1555, VDMA 24562 and AFNORstandards. The exception is the somewhat largerfootprint of the end covers and envelope of the bodyextrusion, due to the hygienic, convex, easy-to-cleangeometry of the cushioning adjustment screw and thecomponents of the integrated sensor system.

Common, high technology design platformThe P1D Clean version has the same technicalplatform as the standard P1D. The best materials,manufacturing methods and the careful attention todesign detail give the P1D Clean Version smooth,quiet operation and long service life.

Convex shape for optimum hygieneWhat makes the P1D Clean version unique is itsconvex body extrusion, which allows the cylinder to bekept clean. Regardless of orientation, fluids will run offthe cylinder body surfaces.


P1D Clean Version



C086

Cushioning screw with positive geometryTo offer the best hygiene properties, the projectingcushioning screw is sealed against the end cover. Thiseliminates dirt-collecting cavities and gives the besthygiene, since it is so easy to clean.

Sealing plugsPlastic sealing plugs are supplied with every CleanVersion of the P1D cylinder. These are installed in theend cover screws which are not used for the cylinderinstallation. To ensure the sealing function, the plugscan be used only once, i.e. they cannot be re-used.When installed in the end cover screws, they aretapped lightly with a hammer for high axial force.

Patent applied for system of integrated standardsensorsThe Clean Version of the P1D cylinder has a system ofsensors, which are fully integrated into the bodyextrusion to give the cylinders a clean external design.Up to four sensors chosen from the range of P1Dstandard sensors, can be mounted in two dedicatedgrooves beneath a transparent, sealed molding.Tightening the stop screw onto the cam shaft will lockeach sensor in the desired position. The sensor LEDsare always fully visible, which facilitates initial set-up,adjustment and trouble-shooting. The entire sensorsystem has a hose-proof design equivalent to IP65.

Up to four integral sensorsCylinders for two integral sensors have two undividedcamshafts along the entire stroke. Free choice of cableexit, front or rear. There is also a version with dividedcamshafts for up to four sensors, which are installedtwo from each end cover, with cable exiting both frontand rear.

The sensor position is easily adjusted byundoing a set screw and using the cableto move the sensor to the desiredposition.

Simple sensor adjustmentThe sensors are mounted into theirgrooves through the opening in atransparent, sealed cover. The sensorcables have strain relief and are sealed.

Once the sensor has been locked in itsnew position, the protective cover isinstalled again.


P1D Clean Version



10

C086

P1D Tie-Rod VersionThe P1D Series is also available in a tie-rod version,based on the same high level technology. This cylinderis the perfect choice wherever a true tie-rod cylinder isneeded.

Installation dimensions to international standardThe P1D Tie-Rod version complies with ISO 6431,ISO/DIS 15552, VDMA 24562 and AFNOR installationdimension standards, for customer reassuranceworld-wide.

Smooth, quiet operation and long service lifeAll seals and end-of-stroke bumpers are made frompolyurethane (PUR), the bearings and piston are madefrom proven engineering plastics with excellent bearingproperties and the initial greasing at the factory with atransparent, food-grade grease. Altogether this givesthe P1D very long service life and gentle, quietoperation.

Optimized cushioningThanks to the plastic inserts in the end covers, eachcylinder bore has been given an individual flowgeometry. This gives an optimized cushioning, which isquicker and easier to set and adjust.

Complete accessory programThe P1D offers a complete ISO, VDMA and AFNORcompatible accessory program, with a wide range ofpiston rod and cylinder mountings for both pivoted andfixed operation.

“Drop-in” sensorThe P1D Tie-Rod utilizes the same global drop-insensors as the Standard and Clean versions. Aningenious multi-jointed adapter joins the sensors to thetie rod in any chosen position along the stroke.


P1D Tie Rod Version



C086


Cylinder Options

Alternative Piston Rod Materials

Double Rod

High Ambient Temperature

3 and 4 Position Cylinders

Tandem Cylinders

Design variantsUsing P1D cylinders as a platform, a number of differentdesigns can be produced to suit differing requirements.Please refer to the “How to Order” section for thedesignation of each variant.

Alternative piston rod materialsAll P1D cylinders in all bores, Ø32-125 mm, can beordered with the following piston rod materials:– Steel, hard chrome plated (standard)– Stainless steel, hard chrome plated– Acid proof steel

Double Rod CylindersAll P1D cylinders in all bores, Ø32-125 mm, are availablewith a double rod, or through rod.

Cylinders with a double rod can take higher side forcesthanks to the double support for the piston rod. In addition,this design makes it easier to install external mechanicalposition sensors as well as giving equal force and flow onboth sides of the piston.

High ambient temperatureFor all bores, Ø32-125 mm, the P1D can be supplied inspecial high ambient temperature version. The cylindershave seal systems, materials and grease for elevatedtemperature ranges. The high temperature version does nothave a magnetic piston (no function at high temperatures).The aluminum piston option is required for service above+80°C (+176°F) and a pinned piston to rod connection isrequired for service above +121°C (+250°F).Ambient temperature range:– -10°C to +121°C, peaks up to +150°C

(+14°F to +250°F, peaks up to +300°F).

Low pressure hydraulicsThe P1D in bores Ø32 - 125 mm can be supplied withspecial seals for operation with low pressure hydraulics upto 10 bar. Temperature range -20 °C to +80 °C (-4°F to+176°F).

3 and 4 position cylindersBy installing two cylinders with the same or differentstroke, it is possible to build a working unit with three orfour positions. This type of unit is available as factory-fitted P1D Tie-Rod Version cylinders in all bores, Ø32-125mm. Other P1D cylinders can be flange mounted back-to-back with a special mounting.

Tandem versionThe P1D is also available as a tandem cylinder, i.e. twocylinders connected in series. This cylinder unit hasalmost twice the force, which is a great advantage inrestricted spaces. Tandem cylinders are available astie-rod style cylinders in all bores Ø32-125 mm.



12

C086

ConnectionThe signal air for the locking device can be obtaineddirectly from a main air supply, or from the air supplyserving the valve that controls the cylinder itself. Forcontrolled ON/OFF operation of the locking device, aseparate quick–venting valve is used.

The piston rod should not be moving when the lockingdevice is activated. The locking device is not intended tobrake a movement in repeated sequences.

Holding Forces


Features/Holding Forces

P1D Series with Piston-Rod Locking DeviceThe P1D Series incorporates a powerful piston – rodlocking device, which clamps the piston rod and locks itin position. The locking device is of the air/springactivated type and is integrated into the front (head)cover of the cylinder.

In the absence of air signal pressure, full holding force isapplied to the piston rod. When air is present, 4 bar(60psi), the locking device is released.

The locking device is available on all cylinder bore sizes.The design of the P1D cylinders with rod lock givesseveral valuable characteristics, such as:

• A holding force corresponding to a pressure of7 bar (102 psi)

• A clean design, with the front (head) end coverand locking device built into a common block forcompact installation.

• Easy to clean, well sealed construction.• Exhaust air from the locking device can be piped

away when there are high demands forcontaminant free environment.

Application• In material handling systems• Position control• In the event of air pressure or electrical control

failure. See holding force chart.• Not to be used in water service or high humidity

environment or in the presence of splashing fluids.

Technical DataWorking medium dry, filtered compressed airWorking pressure max. 1000 kPa (10 bar)Working temperature -10°C to +75°CLocking pressure1 min. 400 kPa (4 bars) ±10%

A clean design, with thefront end-cover andlocking device built intoa common block forcompact installation.

The exhaust air from the lockingdevice can be ducted away whenthere are high demands on theexternal environment.

1) Signal pressure to connection port on locking device.

Bore SizesHolding Forces

Newton (N) Pounds (LBS)

32mm 550 123

40mm 860 193

50mm 1345 303

63mm 2140 481

80mm 3450 755

100mm 5390 1211

125mm 8425 1894

Easy to clean, well-sealedconstruction. The cylinderbarrel has integral tie rods.



C086

Note: Cushion adjustment (head only)located at position #3 for bore size32mm only.


Dimensions/Technical Information

Dimensions

Cylinder bore A AM B BA BG D D4 E EE G H KK L L8 L12 mm mm mm mm mm mm mm mm mm mm mm mm mm mm

32 16 22 30 30 16 12 45,0 46,5 G1/8 28,5 71,5 M10X1,25 56,0 137 6,0 40 16 24 35 35 16 16 52,0 52,0 G1/4 33,0 77,0 M12X1,25 56,0 149 6,5 50 18 32 40 40 16 20 60,7 63,5 G1/4 33,5 80,5 M16X1,5 62,5 153 6,5 63 26 32 45 45 16 20 71,5 76,0 G3/8 39,5 96,5 M16X1,5 74,5 178 6,5 80 35 40 45 45 17 25 86,7 95,5 G3/8 39,5 110,5 M20X1,5 87,0 199 10,0

100 50 40 55 55 17 25 106,7 114,5 G1/2 44,5 132,5 M20X1,5 106,0 226 10,0 125 60 54 60 60 20 32 134,0 140,0 G1/2 51,0 145,0 M27X2 117,0 254 13,0

Cylinder bore OA P PL PP R RT S SS SW T TT VA VD WH mm mm mm mm mm mm mm mm mm mm mm mm mm mm

32 6 63,5 13 21,8 32,5 M6 6 6,5 10 2,5 4,5 3,5 4,5 15 40 6 68,0 14 21,9 38,0 M6 9 8,0 13 2,0 5,5 3,5 4,5 16 50 8 73,5 14 25,9 46,5 M8 8 4,0 17 4,0 7,5 3,5 5,0 17 63 8 89,5 16 27,4 56,5 M8 8 6,5 17 2,0 11,0 3,5 5,0 17 80 – 101,5 16 30,5 72,0 M10 9 0 22 5,0 15,0 3,5 4,0 20

100 – 123,5 18 35,8 89,0 M10 12 0 22 6,0 20,0 3,5 4,0 20 125 – 136,0 23 40,5 110,0 M12 12 0 27 6,0 17,5 5,5 6,0 27

S=Stroke length

Tolerances

Cylinder bore B R I8 BA Stroke-length tolerance mm mm mm mm mm

32 d11 ±0,5 ±0,4 d11 +1/-0 40 d11 ±0,5 ±0,7 d11 +1/-0 50 d11 ±0,6 ±0,7 d11 +1/-0 63 d11 ±0,7 ±0,8 d11 +1/-0 80 d11 ±0,7 ±0,8 d11 +1/-0

100 d11 ±0,7 ±1,0 d11 +1/-0 125 d11 ±1,1 ±1,0 d11 +1/-0

1. Lock valve must be maintained energized during cylinder motion,otherwise rod lock is engaged and cylinder valve shifts to mid position.

2. Cylinder valve must be maintained energized during extend or retract.Also keep energized at end of stroke until change of direction is desired.

3. Mid position of 5/3 Cylinder valve may be pressurized outlets if thecombination of pressure load on the cylinder and inertia effects of the attachedload do not exceed the holding force rating of the rod lock device, includingallowance for wear.

4. Do not use cylinder lines for any logic functions — pressure levels varytoo much.

3/2 LOCK VALVE(internal pilot)

AuxiliarySupply

Main Supply

5/3 CYLINDERVALVE

(external pilot)

P1D with Rod Lock

12

8

4VD

A

L

P

WH

L + S

H

ØD

T

STT

SS

ØBA

KK

ØD

ØB

AM L

BG

EE

VAG

PLPP

OA

RT

R

E

6G1/8

DIN 439BSW

(M5 Ø32 - Ø40)G 1/8 Ø50 - Ø125)



14

C086

AMØ

B

ØD

KK

BG

VD

G

WH

WH WH + S

L2

L12

ØD

4

PP

PL

SS

TT Ø

BA

VA

GL8 + S

RT

OA

R

E

L9 + 2 x S

DIN 439B

SW

EE



Dimensions P1D Standard Version

Dimensions

Cylinder bore AM B BA BG D D4 E EE G KK L2 L8 L9 L12mm mm mm mm mm mm mm mm mm mm mm mm mm

32 22 30 30 16 12 45,0 50,0 G1/8 28,5 M10x1,25 16,0 94 146 6,040 24 35 35 16 16 52,0 57,4 G1/4 33,0 M12x1,25 19,0 105 165 6,550 32 40 40 16 20 60,7 69,4 G1/4 33,5 M16x1,5 24,0 106 180 8,063 32 45 45 16 20 71,5 82,4 G3/8 39,5 M16x1,5 24,0 121 195 8,080 40 45 45 17 25 86,7 99,4 G3/8 39,5 M20x1,5 30,0 128 220 10,0

100 40 55 55 17 25 106,7 116,0 G1/2 44,5 M20x1,5 32,4 138 240 10,0125 54 60 60 20 32 134,0 139,0 G1/2 51,0 M27x2 45,0 160 290 13,0

Cylinder bore OA PL PP R RT SS SW TT VA VD WHmm mm mm mm mm mm mm mm mm mm mm

32 6 13 21,8 32,5 M6 4,0 10 4,5 3,5 4,5 2640 6 14 21,9 38,0 M6 8,0 13 5,5 3,5 4,5 3050 8 14 25,9 46,5 M8 4,0 17 7,5 3,5 4,5 3763 8 16 27,4 56,5 M8 6,5 17 11,0 3,5 4,5 3780 6 16 30,5 72,0 M10 0 22 15,0 3,5 4,5 46

100 6 18 35,8 89,0 M10 0 22 20,0 3,5 4,5 51125 8 23 40,5 110,0 M12 0 27 17,5 5,5 6,5 65S=Stroke

Tolerances

Cylinder bore B BA L8 L9 R Stroke tolerancemm mm mm mm mm

32 d11 d11 ±0,4 ±2 ±0,5 +1/-040 d11 d11 ±0,7 ±2 ±0,5 +1/-050 d11 d11 ±0,7 ±2 ±0,6 +1/-063 d11 d11 ±0,8 ±2 ±0,7 +1/-080 d11 d11 ±0,8 ±3 ±0,7 +1/-0

100 d11 d11 ±1,0 ±3 ±0,7 +1/-0125 d11 d11 ±1,0 ±3 ±1,1 +1/-0



C086

Dimensions

Cylinder bore AM B BA BG D D4 E EE G KK L2 L8 L9 L12mm mm mm mm mm mm mm mm mm mm mm mm mm

32 22 30 30 16 12 45,0 46,5 G1/8 28,5 M10x1,25 18 94 146 6,040 24 35 35 16 16 52,0 52,0 G1/4 33,0 M12x1,25 20 105 165 6,550 32 40 40 16 20 60,7 63,5 G1/4 33,5 M16x1,5 26 106 180 6,563 32 45 45 16 20 71,5 76,0 G3/8 39,5 M16x1,5 26 121 195 6,580 40 45 45 17 25 86,7 95,5 G3/8 39,5 M20x1,5 33 128 220 10,0

100 40 55 55 17 25 106,7 114,5 G1/2 44,5 M20x1,5 33 138 240 10,0125 54 60 60 20 32 134,0 140,0 G1/2 51,0 M27x2 41 160 290 13,0

Cylinder bore OA PL PP R RT SS SW TT VA VD WHmm mm mm mm mm mm mm mm mm mm mm

32 6 13 21,8 32,5 M6 6,5 10 4,5 3,5 4,5 2640 6 14 21,9 38,0 M6 8,0 13 5,5 3,5 4,5 3050 8 14 25,9 46,5 M8 4,0 17 7,5 3,5 4,5 3763 8 16 27,4 56,5 M8 6,5 17 11,0 3,5 4,5 3780 6 16 30,5 72,0 M10 0 22 15,0 3,5 4,5 46

100 6 18 35,8 89,0 M10 0 22 20,0 3,5 4,5 51125 8 23 40,5 110,0 M12 0 27 17,5 5,5 6,5 65S=Stroke

Tolerances

Cylinder bore B BA L8 L9 R Stroke tolerancemm mm mm mm mm

32 d11 d11 ±0,4 ±2 ±0,5 +1/-040 d11 d11 ±0,7 ±2 ±0,5 +1/-050 d11 d11 ±0,7 ±2 ±0,6 +1/-063 d11 d11 ±0,8 ±2 ±0,7 +1/-080 d11 d11 ±0,8 ±3 ±0,7 +1/-0

100 d11 d11 ±1,0 ±3 ±0,7 +1/-0125 d11 d11 ±1,0 ±3 ±1,1 +1/-0


Dimensions P1D Removable Gland Version


AM L12

ØB

ØD KK

DIN 439B

SW

VD

L2 G

WH L + S8

G

VAØD4

ØBA

PL

PP

EE OA

RT

E

R

BG

WH

L + 2 x S

WH + S

9

SS

TT



16

C086


Dimensions P1D Clean and Tie Rod Versions

AM

ØB

ØD

KK

VD

G

WH

L2

L12

PPE2 maxPL

SS

TT Ø

BA

VA

GL8 + S

RT

OA

R

E

E 1

DIN 439B

SW

EE

ØD

7

AM

ØB

ØD

KK

VD

G

WH

L2

L12

ØD

5

ØD

6

PP

PL

SS

TT Ø

BA

VAG

L8 + S

RT

OA

R

E

DIN 439B

SW

EE

Dimensions

Cylinder boreD5 D6 D7 E1 E2max

mm mm mm mm mm mm

32 36 5,3 49,6 32 540 45 5,3 57,3 36 650 55 7,1 69,3 42 663 68 7,1 82,3 49 580 85 8,9 99,3 57 5

100 105 8,9 117,6 68 6125 132 10,7 142,8 81 6

Other dimensions, see page 14.

P1D Tie-Rod Version

P1D Clean Version



C086


General Specifications

Specifications

Cylinder Cylinder Piston rod Cushioning Air con- Connectiondesignation bore area dia. area thread length sump- thread

tion2)

mm cm2 mm cm2 mm litre

P1D-•032••-XXXX1) 32 8,0 12 1,1 M10x1,25 17 0,105 G1/8P1D-•040••-XXXX1) 40 12,6 16 2,0 M12x1,25 19 0,162 G1/4P1D-•050••-XXXX1) 50 19,6 20 3,1 M16x1,5 20 0,253 G1/4P1D-•063••-XXXX1) 63 31,2 20 3,1 M16x1,5 23 0,414 G3/8P1D-•080••-XXXX1) 80 50,3 25 4,9 M20x1,5 23 0,669 G3/8P1D-•100••-XXXX1) 100 78,5 25 4,9 M20x1,5 27 1,043 G1/2P1D-•125••-XXXX1) 125 122,7 32 8,0 M27x2 30 1,662 G1/2

Cylinder Total mass (kg) Total mass (kg) Mass moving components (kg)designation at 0 mm stroke Supplement per at 0 mm Supplement per

10 mm stroke stroke 10 mm strokeStandard Tie-Rod Clean Standard Tie-Rod Clean All variants All variants

P1D-•032••-XXXX1) 0,55 0,54 0,60 0,023 0,022 0,047 0,13 0,009P1D-•040••-XXXX1) 0,80 0,79 0,88 0,033 0,030 0,063 0,24 0,016P1D-•050••-XXXX1) 1,20 1,20 1,32 0,048 0,048 0,094 0,42 0,025P1D-•063••-XXXX1) 1,73 1,73 1,86 0,051 0,051 0,101 0,50 0,025P1D-•080••-XXXX1) 2,45 2,47 2,63 0,075 0,079 0,142 0,90 0,039P1D-•100••-XXXX1) 4,00 4,00 4,22 0,084 0,084 0,168 1,10 0,039P1D-•125••-XXXX1) 6,87 6,73 7,01 0,138 0,129 0,248 2,34 0,063

1) Stroke2) Free air consumption per 10 mm stroke for a double stroke at 6 bar

Operation dataWorking pressure Max 10 barWorking temperature min maxStandard -20°C (-4°F) +80°C (+176°F)High temp version -10°C (+14°F) +121°C (+250°F)

Aluminum piston is required for service above +80°C (+176°F)Greased for life, does not normally need additional lubrication. Iflubrication is given, this must always be continued.

Bores and strokesP1D 32 - 125 mmMax stroke 2800 mmMin stroke, P1D Clean 25 mm

Cylinder forcesThe values for cylinder forces are theoretical, and should bereduced to suit working conditions.

Cylinder Cylinder Theoretical cylinder forcedesignation bores at 6 bar

extend stroke retract strokemm N N

P1D-•032••-XXXX3) 32 482 414P1D-•040••-XXXX3) 40 754 633P1D-•050••-XXXX3) 50 1178 989P1D-•063••-XXXX3) 63 1870 1681P1D-•080••-XXXX3) 80 3016 2721P1D-•100••-XXXX3) 100 4712 4417P1D-•125••-XXXX3) 125 7363 6880

3) XXXX = stroke• = optional design in accordance with order key

P1D Clean VersionProtection class Tube-proof in accordance with IP65Chemical resistance Tested for normally used industrial

detergents, both acid and alkaline

Working medium, air qualityWorking medium Dry, filtered compressed air

to ISO 8573-1 class 3. 4. 3. or better

Recommended air quality for cylinders

For best possible service life and trouble-free operation, ISO 8573-1quality class 3.4.3 should be used. This means 5 µm filter (standardfilter) dew point +3°C (+37°F) for indoor operation (a lower dew pointshould be selected for outdoor operation) and oil concentration 1.0mg oil/m3, which is what a standard compressor with a standardfilter gives.

ISO 8573-1 quality classes

Quality Pollution Water Oilclass particle max con- max. press. max con-

size centration dew point centration (µm) (mg/m³) (°C) (°F) (mg/m³)

1 0,1 0,1 -70 -94 0,012 1 1 -40 -40 0,13 5 5 -20 -4 1,04 15 8 +3 +37 5,05 40 10 +7 +44 256 - - +10 +50 -



18

C086


Material Specification and Cushioning Diagram

4,0

3,0

2,0

1,5

1,0

0,50,4

0,3

0,2

0,11 2 3 4 5 10 20 30 40 50 100 200 300 500 1000 2000

Ø32Ø40 Ø50

Ø63Ø80

Ø100Ø125

Speed [m/s]

Mass [kg]

Material specificationStandard designBody extrusion Clear anodized aluminiumEnd cover Powder coated or black anodized alum.End cover inserts POMEnd cover nuts/screws Zinc plated steel 8.8Piston rod nut Zinc plated steelPiston rod Chrome-plated steelScraper ring PURPiston rod bearing POMPiston POMPiston bearing POMMagnetic ring Plastic bound magnetic materialPiston bolt Zinc plated steelPiston seal PURO-rings Nitrile rubber, NBREnd-of-stroke washers PURCushioning seals PURCushioning screws PA

P1D CleanTransparent molding SiliconeTransparent cover ABSScrews, sensor system Stainless steelUpper seal, cover EPDMLower seal, cover Foam rubberSealing plugs PAPiston rod nut Stainless steel

P1D Tie-RodTie-rods Blackened steel

Design variantsHigh temperature design

Seals/scraper ring Fluorocarbon rubberPiston Anodized aluminiumPiston/piston rod bearing PTFE filled bronze

Low pressure hydraulicsSeals/scraper ring Nitrile rubber, NBRPiston Anodized aluminiumPiston/piston rod bearing UHMWPE plastic

OptionPiston rod material Acid-proof steel

Hard-chromium plated stainless steel

Cushioning characteristicsThe diagram below is used for sizing of cylinders related tothe cushioning capacity. The maximum cushioning capacityshown in the diagram assumes the following:

• Low load, i.e. low pressure drop across the piston• Equilibrium speed• Correctly adjusted cushioning screw• 6 bar at cylinder port

The load is the sum of internal and external friction, plus anygravitational forces. At high relative load (pressure dropexceeding 1 bar), we recommend that for any given speed,the mass should be reduced by a factor of 2.5, or for a givenmass, the speed should be reduced by a factor of 1.5. This isin relation to the maximum performance given in thediagram.



C086

1) The “equivalent throttling bore“ is a long throttle (for example a tube) or a series of throttles (for example, through a valve)converted to a short throttle which gives a corresponding flow rate. This should not be confused with the “orifice“ which issometimes specified for valves. The value for the orifice does not normally take account of the fact that the valve containsa number of throttles.

2) Qn is a measure of the valve flow capacity, with flow measured in litre per minute (l/min) at 6 bar(e) supply pressure and1 bar pressure drop across the valve.

Guide for selecting suitable tubingThe selection of the correct size of tubing is often basedon experience, with no great thought to optimizingenergy efficiency and cylinder velocity. This is usuallyacceptable, but making a rough calculation can result inworthwhile economic gains.

The following is the basic principle:1. The primary line to the working valve could be over

sized (this does not cause any extra air consumptionand consequently does not create any extra costs inoperation).

2. The tubes between the valve and the cylinder should,however, be optimized according to the principle thatan insufficient bore throttles the flow and thus limitsthe cylinder speed, while an oversized pipe creates adead volume which increases the air consumptionand fillingtime.

The chart below is intended to help when selecting thecorrect size of tube to use between the valve and thecylinder.

The following prerequisites apply:The cylinder load should be about 50% of thetheoretical force (= normal load). A lower load givesa higher velocity and vice versa. The tube size isselected as a function of the cylinder bore, the desiredcylinder velocity and the tube length between the valveand the cylinder.

If you want to use the capacity of the valve to itsmaximum, and obtain maximum speed, the tubingshould be chosen so that they at least correspond withthe equivalent restriction diameter (see descriptionbelow), so that the tubing does not restrict the totalflow. This means that a short tubing must have at leastthe equivalent restriction diameter. If the tubing islonger, choose it from the table below. Straight fittingsshould be chosen for highest flow rates. (Elbow andbanjo fittings cause restriction.)


Guide for Tubing and Valve Selection

0,2 0,5 0,8 1,1 1,4 0 1 2 3 4 5 6 7 8 9 10

1

2

3

4

5

6

7

8

9

10

11

Ø10Ø16Ø20Ø25Ø32Ø40Ø50

Ø63

Ø80

Ø100

Ø125

14/11

–/12

–/13

–/14

–/15

–/16

12/10

10/8

8/6

6/45/34/2,7

CylinderØ [mm]

Equivalent throttling bore 1) TubeØOut./ØInt. [mm]

Length of tubing [m]Cylinder speed [m/s]

Sui

tabl

e va

lve

Qn2)

app

800

l/m

in

Sui

tabl

e va

lve

Qn2)

app

100

0 l/m

in

Sui

tabl

e ar

ea f

or v

alve

with

Qn2)

app

300

0 l/m

in



20

C086


How to Develop a Model Number

Piston Style

Cushions Piston Material

Plastic AluminumNone M XCush B/E –* 4Cush head J 5

Cush cap K 6

P1 D – S S

Bore Size32mm-125mm 032

Cylinder PortsFront

Port Type & rearBSPP Ports –*(G threads)NPTF ports EBSPT Ports Q(RC threads)

* The dash must beplaced in model code.

M –032

Piston Rod & Seal Material

Piston Rod Seal Material

Material Standard Fluoro- Hydraulic**carbon*

Chromium platedcarbon steel C G J

Chromium platedstainless steel R D Z

Acid resistantstainless steel M N N/A

*If used for temperature above +80°C (+176°F),aluminum piston required.**Hydraulic seal option valid for Removable GlandVersion only. Adjustable cushions and rod lock optionsnot available.

Version Rod Lock

Cylinder BodyProfile None Fitted

Die CastStandard S L

End Caps Tie Rod T MClean C D

Removable Standard G RGland Tie Rod E 7Special Any Special /

* The dash must be placed in model code.

FunctionFastener Rod Wiper Double Double

Type Style Acting Rod Tandem

Standard end Std scraper M F Ccover screws Metal scraper* Q R J

Stainless steel Std scraper A G N/Aend cover screws Metal scraper* S T N/A

*Available on the Removable Gland Version only.



C086


How to Develop a Model Number

Rod Mountings & Plugs††Rod Mounting No plugs With plugsSwivel rod eye S A

Swivel rod eye SS T 1Swivel rod eye with clevisbracket GA V E

Swivel rod eye SS with` clevis bracket GA W 2Clevis C B

Clevis SS D 3Flexco coupling F GOne additional piston rod nut X P

Stainless steel piston rod nut Y 4Acid resistant nut Z 5None (piston rod nut only) N R

Stroke†in mm 0500

0500 S 1 N N

*Note: For sensor part numbers and specifications,please refer to electronic sensors section.

Rod EndRod End StyleMetric male NMetric female 6Special* 3

* Please give desireddimensions for KK, AMand WH. If otherwisespecial, furnish dimen-sioned sketch.

Sensors*Cable Location

Front Rear FrontFactory-fitted sensors or left or right & rearP1D Clean 6 7 8prepared for sensors

P1D (except PID Clean) Nprepared for sensors

†When specifying a stop tube,place a “/” in the version field.Then specify the version,amount of stop tube, andamount of net stroke. Thestroke used in the model codeshould be gross stroke (netstroke plus stop tube).

††Please review Piston RodSelection Chart in the Engi-neering Section to check for arod buckling condition.

Mounting StyleStandard Rotated 90°

Flange MF1/MF2 in front end 1 3Flange MF1/MF2 in rear end B 4Flange MF1/MF2 in both ends 2 K

Foot brackets MS1 F RClevis bracket GA aluminum C URear eye MP4 aluminum E V

Rear swivel eye aluminum S WClevis bracket MP2 aluminum T YRear eye + clevis (MP4 + MP2) aluminum L Z

Clevis bracket MP2 + pivot hinge aluminum X 5Clevis bracket GA aluminum + steelswivel hinge Q 0

Rear swivel eye + clevis bracketGA aluminum M ACylinder trunnion (XV dimension)* G 7

Trunnion flange in front end H PTrunnion flange in rear end J 8None N 9

*Requires XV dimension and tie rod version.



22

C086

Flange MF1/MF2

According to ISO MF1/MF2, VDMA 24 562, AFNOR

Cyl.- d1 FB TG1 E R MF TF UF l1 W ZF ZBbore H11 H13 JS14 JS14 JS14 -0,5mm mm mm mm mm mm mm mm mm mm mm mm mm

32 30 7 32,5 45 32 10 64 80 5,0 16 130 123,540 35 9 38,0 52 36 10 72 90 5,0 20 145 138,550 40 9 46,5 65 45 12 90 110 6,5 25 155 146,563 45 9 56,5 75 50 12 100 120 6,5 25 170 161,580 45 12 72,0 95 63 16 126 150 8,0 30 190 177,5

100 55 14 89,0 115 75 16 150 170 8,0 35 205 192,5125 60 16 110,0 140 90 20 180 205 10,5 45 245 230,5

S = Stroke length

Foot bracket MS1

According to ISO MS1, VDMA 24 562, AFNOR

Cyl.- AB TG1 E TR AO AU AH l7 AT l9 SAbore H14 JS14 JS15 JS14mm mm mm mm mm mm mm mm mm mm mm mm

32 7 32,5 45 32 10 24 32 30 4,5 17,0 14240 9 38,0 52 36 8 28 36 30 4,5 18,5 16150 9 46,5 65 45 13 32 45 36 5,5 25,0 17063 9 56,5 75 50 13 32 50 35 5,5 27,5 18580 12 72,0 95 63 14 41 63 49 6,5 40,5 210

100 14 89,0 115 75 15 41 71 54 6,5 43,5 220125 16 110,0 140 90 22 45 90 71 8,0 60,0 250

S = Stroke length

Pivot bracket with rigid bearing

According to CETOP RP 107 P, VDMA 24 562, AFNOR

Cyl.- CK S5 K1 K2 G1 G2 EM G3 CA H6 R1bore H9 H13 JS14 JS14 JS14 JS15mm mm mm mm mm mm mm mm mm mm mm mm

32 10 6,6 38 51 21 18 25,5 31 32 8 10,040 12 6,6 41 54 24 22 27,0 35 36 10 11,050 12 9,0 50 65 33 30 31,0 45 45 12 13,063 16 9,0 52 67 37 35 39,0 50 50 12 15,080 16 11,0 66 86 47 40 49,0 60 63 14 15,0

100 20 11,0 76 96 55 50 59,0 70 71 15 19,0125 25 14,0 94 124 70 60 69,0 90 90 20 22,5

32 0,23 P1C-4KMBA40 0,28 P1C-4LMBA50 0,53 P1C-4MMBA63 0,71 P1C-4NMBA80 1,59 P1C-4PMBA

100 2,19 P1C-4QMBA125 3,78 P1C-4RMB

ØF

B

R

UF

Ød1 TF

E

TG1

ZB+S

MFMF

W

ZF+S

I1

5

G

¯CK

CA

G2

G3

1R1

H6

KK12

S¯

EM

SA+S

ØAB

AU AO

AT

E

TGI

IAH

TR

7

32 0,06* P1C-4KMF40 0,08* P1C-4LMF50 0,16* P1C-4MMF63 0,25* P1C-4NMF80 0,50* P1C-4PMF

100 0,85* P1C-4QMF125 1,48* P1C-4RMF

* Weight per item

Cylinder mountingsType Description Cyl. bore Weight Order code

Ø mm kg

Intended for fixed mounting of cylinder. Foot bracket can be fittedto front and rear end covers of cylinder.

MaterialsFoot bracket: Surface-treated steel, blackMounting screws acc. to DIN 912: Zinc-plated steel 8.8

Supplied in pairs with mounting screws for attachment to cylinder.

Intended for flexible mounting of cylinder. The pivot bracket can becombined with clevis bracket MP2.

MaterialsPivot bracket: Surface-treated aluminium, blackBearing: Sintered oil-bronze bushing

Intended for fixed mounting of cylinder. Flange can be fitted to frontor rear end cover of cylinder.MaterialsFlange: Surface-treated aluminum, black (125mm bore flangesteel, black)Mounting screws acc. to DIN 6912: Zinc-plated steel 8.8Supplied complete with mounting screws for attachment tocylinder.

32 0,06 P1C-4KMD40 0,08 P1C-4LMD50 0,15 P1C-4MMD63 0,20 P1C-4NMD80 0,33 P1C-4PMD

100 0,49 P1C-4QMD125 1,02 P1C-4RMD


Mountings



C086

Swivel eye bracket Intended for use together with clevis bracket GA

MaterialBracket: Surface-treated aluminium, blackSwivel bearing acc. to DIN 648K: Hardened steel

Supplied complete with mounting screws for attachment tocylinder.

According to VDMA 24 562, AFNOR

Cyl.- E B1 B2 EN R1 R2 FL l2 L CN XD Zbore H7mm mm mm mm mm mm mm mm mm mm mm mm

32 45 10,5 - 14 16 - 22 5,5 12 10 142 4°40 52 12,0 - 16 18 - 25 5,5 15 12 160 4°50 65 15,0 51 21 21 19 27 6,5 15 16 170 4°63 75 15,0 - 21 23 - 32 6,5 20 16 190 4°80 95 18,0 - 25 29 - 36 10,0 20 20 210 4°

100 115 18,0 - 25 31 - 41 10,0 25 20 230 4°125 140 25,0 - 37 40 - 50 10,0 30 30 275 4°

S = Stroke length

Clevis bracket MP2 Intended for flexible mounting of cylinder. Clevis bracketMP2 can be combined with clevis bracket MP4.

MaterialsClevis bracket: Surface-treated aluminium, blackPin: Surface hardened steelCirclips according to DIN 471: Spring steelMounting screws acc. to DIN 912: Zinc-plated steel 8.8


According to ISO MP2, VDMA 24 562, AFNOR

Cyl.- C E UB CB FL L l2 CD MR XDbore h14 H14 ±0,2 H9mm mm mm mm mm mm mm mm mm mm mm

32 53 45 45 26 22 13 5,5 10 10 14240 60 52 52 28 25 16 5,5 12 12 16050 68 65 60 32 27 16 6,5 12 12 17063 78 75 70 40 32 21 6,5 16 16 19080 98 95 90 50 36 22 10,0 16 16 210

100 118 115 110 60 41 27 10,0 20 20 230125 139 140 130 70 50 30 10,0 25 25 275

S = Stroke length

32 0,08 P1C-4KMSA40 0,11 P1C-4LMSA50 0,20 P1C-4MMSA63 0,27 P1C-4NMSA80 0,52 P1C-4PMSA

100 0,72 P1C-4QMSA125 1,53 P1C-4RMSA

32 0,08 P1C-4KMT40 0,11 P1C-4LMT50 0,14 P1C-4MMT63 0,29 P1C-4NMT80 0,36 P1C-4PMT

100 0,64 P1C-4QMT125 1,17 P1C-4RMT

UB

CB

E

XD+S

MR

I

FL

L

2

C

XD+S

ØCN

R1

L

R2

B

B1

2

EN

L2FL

ZZ


Ø mm kg


Mountings

Now in aluminum!



24

C086

Clevis bracket MP4 Intended for flexible mounting of cylinder. Clevis bracketMP4 can be combined with clevis bracket MP2.

MaterialsClevis bracket: Surface-treated aluminium, blackMounting screws acc. to DIN 912: Zinc-plated steel 8.8


According to ISO MP4, VDMA 24 562, AFNOR

Cyl.- E EW FL L l2 CD MR XDbore ±0,2 H9mm mm mm mm mm mm mm mm mm

32 45 26 22 13 5,5 10 10 14240 52 28 25 16 5,5 12 12 16050 65 32 27 16 6,5 12 12 17063 75 40 32 21 6,5 16 16 19080 95 50 36 22 10,0 16 16 210

100 115 60 41 27 10,0 20 20 230125 140 70 50 30 10,0 25 25 275

S = Stroke length

Clevis bracket GA Intended for flexible mounting of cylinder. Clevis bracketGA can be combined with pivot bracket with swivel bear-ing, swivel eye bracket and swivel rod eye.

MaterialsClevis bracket: Surface-treated aluminiumPin: Surface hardened steelLocking pin: Spring steelCirclips according to DIN 471: Spring steelMounting screws acc. to DIN 912: Zinc-plated steel 8.8



Cyl.- C E B2 B1 T B3 R2 L1 FL l2 L CN R1 XDbore d12 H14 ±0,2 F7mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

32 41 45 34 14 3 3,3 17 11,5 22 5,5 12 10 11 14240 48 52 40 16 4 4,3 20 12,0 25 5,5 15 12 13 16050 54 65 45 21 4 4,3 22 14,0 27 6,5 17 16 18 17063 60 75 51 21 4 4,3 25 14,0 32 6,5 20 16 18 19080 75 95 65 25 4 4,3 30 16,0 36 10,0 20 20 22 210

100 85 115 75 25 4 4,3 32 16,0 41 10,0 25 20 22 230125 110 140 97 37 6 6,3 42 24,0 50 10,0 30 30 30 275

S = Stroke length

32 0,09 P1C-4KMCA40 0,13 P1C-4LMCA50 0,17 P1C-4MMCA63 0,36 P1C-4NMCA80 0,58 P1C-4PMCA

100 0,89 P1C-4QMCA125 1,75 P1C-4RMCA

EW

E

XD+S

CD

MR

I

FL

L

2

32 0,09 P1C-4KME40 0,13 P1C-4LME50 0,17 P1C-4MME63 0,36 P1C-4NME80 0,46 P1C-4PME

100 0,83 P1C-4QME125 1,53 P1C-4RME

Stainless steel Pin Set GAMaterialsPin: Stainless steelLocking pin: Stainless steelCirclips according to DIN 471: Stainless steel32 0,05 930105431140 0,06 930105431250 0,07 930105431363 0,07 930105431480 0,17 9301054315

100 0,31 9301054316125 0,54 9301054317

XD+S

CN

R1

L

L

R2

B

B

E

1

2

B3

T1

L2FL

C

Now in aluminium!


Ø mm kg


Mountings



C086


Mountings

Pivot bracket with Intended for use together with clevis bracket GA.swivel bearing

MaterialPivot bracket: Surface-treated steel, blackSwivel bearing acc. to DIN 648K: Hardened steel


Cyl.- CN S5 K1 K2 EU G1 G2 EN G3 CH H6 ER Zbore H7 H13 JS14 JS14 JS14 JS15mm mm mm mm mm mm mm mm mm mm mm mm mm

32 10 6,6 38 51 10,5 21 18 14 31 32 10 16 4°40 12 6,6 41 54 12,0 24 22 16 35 36 10 18 4°50 16 9,0 50 65 15,0 33 30 21 45 45 12 21 4°63 16 9,0 52 67 15,0 37 35 21 50 50 12 23 4°80 20 11,0 66 86 18,0 47 40 25 60 63 14 28 4°

100 20 11,0 76 96 18,0 55 50 25 70 71 15 30 4°125 30 14,0 94 124 25,0 70 60 37 90 90 20 40 4°

Mounting kit Mounting kit for back to back mounted cylinders,3 and 4 position cylinders.

Material:Mounting: AluminiumMounting screws: Zinc-plated steel 8.8

Cyl.- E TG ØFB MF A ØBAboremm mm mm mm mm mm mm

32 50 32,5 6,5 5 16 3040 60 38,0 6,5 5 16 3550 66 46,5 8,5 6 20 4063 80 56,5 8,5 6 20 4580 100 72,0 10,5 8 25 45

100 118 89,0 10,5 8 25 55

Pivot bracket for MT4 Intended for use together with central trunnion MT4.

MaterialPivot bracket: Surface-treated aluminiumBearing acc. to DIN 1850 C: Sintered oil-bronze bushing

Supplied in pairs.

According to ISO, VDMA 24 562, AFNOR

Cyl.- B1 B2 A C d1 d2 H1 H2 fx45°bore H13 minmm mm mm mm mm mm mm mm mm mm

32 46 18,0 32 10,5 12 6,6 30 15 1,040 55 21,0 36 12,0 16 9,0 36 18 1,650 55 21,0 36 12,0 16 9,0 36 18 1,663 65 23,0 42 13,0 20 11,0 40 20 1,680 65 23,0 42 13,0 20 11,0 40 20 1,6

100 75 28,5 50 16,0 25 14,0 50 25 2,0125 75 28,5 50 16,0 25 14,0 50 25 2,0

5

G

¯CN

CH

G2

G3

1ER

H6

KK12

S¯

EU

ZZ

EN

E

TG

ØFB

ETG

A

MF

ØBA

32 0,04* 930105426140 0,07* 930105426250 0,07* 930105426263 0,12* 930105426480 0,12* 9301054264

100 0,21* 9301054266125 0,21* 9301054266

* Weight per item.

32 0,18 P1C-4KMA40 0,25 P1C-4LMA50 0,47 P1C-4MMA63 0,57 P1C-4NMA80 1,05 P1C-4PMA

100 1,42 P1C-4QMA125 3,10 P1C-4RMA

32 0,060 P1E-6KB040 0,078 P1E-6LB050 0,162 P1E-6MB063 0,194 P1E-6NB080 0,450 P1E-6PB0

100 0,672 P1E-6QB0

C

B2

fx45°

H2

Ød1

H1

AB1

Ød2


Ø mm kg



26

C086


Mountings

Center trunnion MT4 Intended for articulated mounting of cylinder. Thisfor P1D-T mounting is only available for the tie-rod design of

P1D. The trunnion is factory-fitted in the centre of thecylinder or at an optional location specified by the XV-measure – see the order code key. Combined with pivotbracket for MT4.

Material:Trunnion: zinc plated steel

Trunnion with optional locationOrdered by letter G in position 17 and desiredXV-measure (3-digit measure in mm) must be supplied.See the order code key on pages 20-21.

According to ISO MT4, VDMA 24 562, AFNOR

Cyl.- TM TL TD R UW L1 X1 XVmin X2bore h14 h14 e9mm mm mm mm mm mm mm mm mm mm

32 50 12 12 1,0 46 15 73,0 62,0 84,040 63 16 16 1,6 59 20 82,5 73,0 92,050 75 16 16 1,6 69 20 90,0 80,5 99,563 90 20 20 1,6 84 25 97,5 89,5 106,080 110 20 20 1,6 102 25 110,0 98,0 122,0

100 132 25 25 2,0 125 30 120,0 110,5 129,5125 160 25 25 2,0 155 32 145,0 132,0 158,0

XVstd = X1 + Stroke length/2XVmax = X2 + Stroke length

Flange mounted trunnion Intended for articulated mounting of cylinder. Thistrunnion can be flange mounted on the front or rear endcover of all P1D cylinders. At your choice, you canorder a complete cylinder with factory-fitted flangemounted trunnion – see the order code key on pages20 and 21. Individual trunnions have order code asshown to the right.

Material:Trunnion: zinc plated steelScrews: zinc plated steel, 8.8

Delivered complete with mounting screws forattachment to the cylinder

According to ISO MT4, VDMA 24 562, AFNOR

Cyl.- TM TL TD R UW L1 XV1 Xbore h14 h14 e9mm mm mm mm mm mm mm mm mm

32 50 12 12 1,0 46 14 19,0 127,040 63 16 16 1,6 59 19 20,5 144,550 75 16 16 1,6 69 19 27,5 152,563 90 20 20 1,6 84 24 25,0 170,080 110 20 20 1,6 102 24 34,0 186,0

100 132 25 25 2,0 155 29 36,5 203,5

XV2 = X +Stroke length

32 0,13 See order40 0,31 key on50 0,37 pages63 0,69 20 and80 0,89 21

100 1,58125 2,60

TL

UW

TM

TD

TL

R

XVstd

L1LL

XVmin

XVmax

32 0,17 P1D-4KMYF40 0,43 P1D-4LMYF50 0,55 P1D-4MMYF63 1,10 P1D-4NMYF80 1,66 P1D-4PMYF

100 3,00 P1D-4QMYF

TL

UW

TM

TD

TL

R

XV1

L1LL

XV2

L1LL


Ø mm kg



C086


Piston Rod Mountings

Swivel rod eye Swivel rod eye for articulated mounting of cylinder.Swivel rod eye can be combined with clevis bracketGA.Maintenance-free.

MaterialsSwivel rod eye: Zinc-plated steelSwivel bearing according to DIN 648K: Hardened steel

Stainless steel swivel Stainless-steel swivel rod eye for articulated mountingrod eye of cylinder. Swivel rod eye can be combined with clevis

bracket GA.Maintenance-free.

MaterialsSwivel rod eye: Stainless steelSwivel bearing according to DIN 648K: Stainless steel

Use stainless steel nut (see page 45) with stainless steel swivel rod eye.According to ISO 8139

Cyl.- A B B CE CN EN ER KK LE N O Zbore min max H9 h12 minmm mm mm mm mm mm mm mm mm mm mm

32 20 48,0 55 43 10 14 14 M10x1,25 15 17 10,5 12°40 22 56,0 62 50 12 16 16 M12x1,25 17 19 12,0 12°50 28 72,0 80 64 16 21 21 M16x1,5 22 22 15,0 15°63 28 72,0 80 64 16 21 21 M16x1,5 22 22 15,0 15°80 33 87,0 97 77 20 25 25 M20x1,5 26 32 18,0 15°

100 33 87,0 97 77 20 25 25 M20x1,5 26 32 18,0 15°125 51 123,5 137 110 30 37 35 M27x2 36 41 25,0 15°

Clevis Clevis for articulated mounting of cylinder.

MaterialClevis, clip: Galvanized steelPin: Hardened steel

Stainless steel clevis Stainless-steel clevis for articulated mounting ofcylinder.

MaterialClevis: Stainless steelPin: Stainless steelCirclips according to DIN 471: Stainless steel

According to ISO 8140

Cyl.- A B B CE CK CL CM ER KK LE Obore min max h11/E9mm mm mm mm mm mm mm mm mm mm mm

32 20 45,0 52 40 10 20 10 16 M10x1,25 20 28,040 24 54,0 60 48 12 24 12 19 M12x1,25 24 32,050 32 72,0 80 64 16 32 16 25 M16x1,5 32 41,563 32 72,0 80 64 16 32 16 25 M16x1,5 32 41,580 40 90,0 100 80 20 40 20 32 M20x1,5 40 50,0

100 40 90,0 100 80 20 40 20 32 M20x1,5 40 50,0125 56 123,5 137 110 30 55 30 45 M27x2 54 72,0

CK

B

ER

CELEA

CL

CM O

KK

32 0,08 P1C-4KRS40 0,12 P1C-4LRS50 0,25 P1C-4MRS63 0,25 P1C-4MRS80 0,46 P1C-4PRS

100 0,46 P1C-4PRS125 1,28 P1C-4RRS

32 0,08 P1S-4JRT40 0,12 P1S-4LRT50 0,25 P1S-4MRT63 0,25 P1S-4MRT80 0,46 P1S-4PRT

100 0,46 P1S-4PRT125 1,28 P1S-4RRT

32 0,09 P1C-4KRC40 0,15 P1C-4LRC50 0,35 P1C-4MRC63 0,35 P1C-4MRC80 0,75 P1C-4PRC

100 0,75 P1C-4PRC125 2,10 P1C-4RRC

32 0,09 P1S-4JRD40 0,15 P1S-4LRD50 0,35 P1S-4MRD63 0,35 P1S-4MRD80 0,75 P1S-4PRD

100 0,75 P1S-4PRD125 2,10 P1S-4RRD

CN

B

N

Z

ACE

LE

O

KK

EN

ER

Z

Piston rod mountingsType Description Cyl. bore Weight Order code

Ø mm kg



28

C086

Flexo coupling Flexo coupling for articulated mounting of piston rod.Flexo fitting is intended to take up axial angle errorswithin a range of ±4°.

MaterialFlexo coupling, nut: Zinc-plated steelSocket: Hardened steel

Supplied complete with galvanized adjustment nut.

Cyl.- B B DL EH EI EK EL EN EO EP EQ ER M Zbore min maxmm mm mm mm mm mm mm mm mm mm mm mm mm

32 36,0 43 M10x1,25 20 23 70 31 12 30 30 19 30 5,0 4°40 37,0 43 M12x1,25 23 23 67 31 12 30 30 19 30 6,0 4°50 53,0 61 M16x1,5 40 32 112 45 19 41 41 30 41 8,0 4°63 53,0 61 M16x1,5 40 32 112 45 19 41 41 30 41 8,0 4°80 57,0 67 M20x1,5 39 42 122 56 19 41 41 30 41 10,0 4°

100 57,0 67 M20x1,5 39 42 122 56 19 41 41 30 41 10,0 4°125 75,5 89 M27x2 48 48 145 60 24 55 55 32 55 13,5 4°

Nut Intended for fixed mounting of accessories to the pistonrod.Material: Zinc-plated steel

All P1D cylinders are delivred with a zinc-plated steelpistonrod nut, except P1D Clean, which is delivered with astainless steel piston rod nut instead.

Stainless steel nut Intended for fixed mounting of accessories to the pistonrod.

Material: Stainless steel A2

All P1D cylinders are delivred with a zinc-plated steelpistonrod nut, except P1D Clean, which is delivered with astainless steel piston rod nut instead.

Acid-proof nut Intended for fixed mounting of accessories to the pistonrod.

Material: Acid-proof steel A4

Cylinders with acid-proof piston rod are supplied withnut of acid-proof steel

According to DIN 439 B

Cyl.-bore A B Cmm mm mm

32 17 5,0 M10x1,2540 19 6,0 M12x1,2550 24 8,0 M16x1,563 24 8,0 M16x1,580 30 10,0 M20x1,5

100 30 10,0 M20x1,5125 41 13,5 M27x2

DL

ER

Z

M

Z

DL

EN EO EP EQ

EI

EL

B

EK

EH

M

32 0,21 P1C-4KRF40 0,22 P1C-4LRF50 0,67 P1C-4MRF63 0,67 P1C-4MRF80 0,72 P1C-4PRF

100 0,72 P1C-4PRF125 1,80 P1C-4RRF

A

C B

32 0,007 912898560140 0,010 026110991050 0,021 912898560363 0,021 912898560380 0,040 0261109911

100 0,040 0261109911125 0,100 0261109912

32 0,007 912672540440 0,010 912672540550 0,021 912672540663 0,021 912672540680 0,040 0261109921

100 0,040 0261109921125 0,100 0261109922

32 0,007 026110991940 0,010 026110992050 0,021 026110991763 0,021 026110991780 0,040 0261109916

100 0,040 0261109916125 0,100 0261109918

Piston rod mountingsType Description Cyl. bore Weight Order code

Ø mm kg


Piston Rod Mountings



C086


Accessories

32 0,02 930105432140 0,02 930105432150 0,05 930105432263 0,05 930105432280 0,09 9301054323

100 0,09 9301054323125 0,15 9301054324

32 0,02 930105433140 0,02 930105433150 0,04 930105433263 0,04 930105433280 0,07 9301054333

100 0,07 9301054333125 0,12 9301054334

32 0,01 912174220140 0,01 912174220150 0,02 912174220263 0,02 912174220280 0,02 9121742203

100 0,02 9121742203125 0,03 9121742204

AccessoriesType Description Cyl. bore Weight Order code

Ø mm kg

Screw set for MP2, MP4, Set of stainless steel screws for fitting clevis bracketsMS1 and GA MP2, MP4 and GA onto the cylinder. The screws have

an internal hexagonal head and are used in specialenvironments, e.g. the food industry, or where there areextra demands for protection against corrosion.

Material:According to DIN 912, Stainless steel, A2

4 pcs per pack.

Screw set for MF1/MF2 Set of stainless steel screws for fitting flanges MF1/MF2onto the cylinder. The screws have an internalhexagonal head and are used in special environments,e.g. the food industry, or where there are extrademands for protection against corrosion.

Material:According to DIN 6912, Stainless steel, A2

4 pcs per pack

Sealing plugs Set of sealing plugs to be fitted in unused end covers.The plugs can be used for all P1D cylinders to avoidcollecting dirt and fluids in the end cover screwrecesses.

Material:Polyamid PA

4 pcs per pack



30

C086

3 and 4 position cylindersThis type of cylinder function consists of two cylinders installed back to back. Twocylinders with the same stroke give a 3 position cylinder with a symmetrical centreposition, whereas different strokes give a 4 position cylinder where the two centralpositions can be calculated from the different stroke lengths.

3 and 4 position cylinders can be ordered in two ways.

Factory-fitted P1D-TTie-rod P1D cylinders are completed at the factory and are joined together as one unitby special tie-rods, see position 9 in the order key. See pages 20, 21.

Installation kit for all designsThere is an installation kit for cylinder bores 32 – 100 mm which makes it possible tojoin any two P1D cylinders together at any time, to make a 3 or 4 position cylinder.

Please refer to cylinder mountings, page 25.

Cylinder A, P1D-T A, P1D-Sbore. mm mm mm

32 247 25640 277 28650 293 30663 323 33680 355 373

100 385 403125 461 –

S=Stroke

3 position: A + 2 x S4 position: A + S1 + S2


3 and 4 Position Cylinders

p1d series - parkercnc.com.mx p1d series is available with all the usual optional designs, such as:...

Documents