oxygen

2
Home Profile Quality Clients Contact Enquiry OXYGEN GAS PLANT NITROGEN GA S PLA NT A CETYLENE GA S PLA NT NITROUS OXIDE GAS PLANT HYDROSTATIC CYLINDER TEST STA TION EXPANSION ENGINE CYLINDER SAFETY POSTERS NITROGEN GAS PLANT Product Data Technical Specification << back 1 | 2 Product Data in reference to 100 M3/Hr capacity plant.Nitrogen gas plant can produce basically Oxygen and nitrogen gas generator . However, the nirogent producing plant can be controlled to nitrogen produce these products in different standard modes as given below, based on standard operating conditions:- Production Cycle -I Oxygen-gaseous-dry-99.5 % and above purity -100 M3/Hr. Nitrogen-gaseous-96-98 % purity -waste product. Production Cycle -II Oxygen-gaseous-dry-99.5 % and above purity-93 M3/Hr. Nitrogen-gaseous-99.6 to 99.8 % purity-125 M3/Hr. (Nitrogen Compressor required for filling this Nitrogen into Cylinders- at extra cost.) Production Cycle -III Oxygen-gaseous-dry-99.5 % and above purity-93 M3/Hr. Nitrogen liquid 15 to 18 Ltrs. Per hour purity 99.9 % Production Cycle -IV Oxygen-gaseous-dry-99.5 % and above purity-70 M3/Hr. Nitrogen gaseous dry-Less than 10 PPM purity = M3/Hr. Nitrogen gaseous dry-Less than 10 PPM purity = M3/Hr. Technical Specification Technical Data Specifications 130 M3/Hr. 170 M3/Hr. 200 M3 / Hr. Air Compressor Capacity 740 M3/Hr. 950 M3/Hr. 1150 M3/Hr. Starting Pressure 40 Kg/cm2 40 Kg/cm2 40 Kg/cm2 Operating Pressure 30-35 kg/cm2 30-35 kg/cm2 30-35 kg/cm2 Starting time till production 7 Hrs. 7 Hrs. 7 Hrs. Defrosting time 4/6 Hrs. 4/6 Hrs. 4/6 Hrs. Defrosting cycle at normal condition 12 months 12 months 12 months Power supply required 420V 220V 3Phase 50 Hz 420V 220V 3Phase 50 Hz 420V 220V 3Phase 50 Hz Rate through put of liquid Oxygen Pump 130 M3/Hr. 170 M3/Hr. 200 M3/Hr. Delivery Pressure of pump 165 kg/cm2 165 kg/cm2 165 kg/cm2 Cylinder filling manifold 2 X 12 2 X 20 2 X 20 Cooling water requirement 40 M3/Hr. (Re- circulated) 50 M3/Hr. (Re- circulated) 70 M3/Hr. (Re- circulated) Make-up water requirement Approx . 0.5 M3/Hr. Approx. 0.5 M3/Hr. Approx. 1 M3/Hr. Max. Individual item weight 8.5 Tons 10 Tons 11 Tons Gross Weight 20 Tons (approx.) 32 Tons (approx.) 40 Tons (approx.) Insulation Perlite . Perlite. Perlite. Assembly Height 8.0 meters 9.2 meters 9.2 meters Area required 200 sq.mtrs. 250 sq.mtrs. 350 sq.mtrs. Material of construction Copper , Brass, Steel etc Copper, Brass, Steel etc Copper, Brass, Steel etc Power consumption 1.2 units/M3 of Oxygen 1.0 units/M3 of Oxygen 1.0 units/M3 of Oxygen << back 1 | 2 Oxygen Gas Plant Nitrogen Gas Plant Acetylene Gas Plant Nitrous Oxide Gas Plant Hydrostatic Cylinder Test Station Expansion Engine Cylinder Safety Posters

Upload: bhuneshwar-chelak

Post on 20-Jul-2016

212 views

Category:

Documents


0 download

DESCRIPTION

oxy

TRANSCRIPT

Home Profile Quality Clients Contact Enquiry

OXYGEN GAS PLANT

NITROGEN GAS PLANT

ACETYLENE GAS PLANT

NITROUS OXIDE GAS PLANT

HYDROSTATIC CYLINDER TEST

STATION

EXPANSION ENGINE

CYLINDER SAFETY POSTERS

NITROGEN GASPLANT

Product Data Technical Specification << back 1 | 2

Product Data in reference to 100 M3/Hr capacity plant.Nitrogen gas plant can produce basically

Oxygen and nitrogen gas generator. However, the nirogent producing plant can be controlled to

nitrogen produce these products in different standard modes as given below, based on standard

operating conditions:-

Production Cycle -I

Oxygen-gaseous-dry-99.5 % and above purity -100 M3/Hr. Nitrogen-gaseous-96-98 % purity -waste

product.

Production Cycle -II

Oxygen-gaseous-dry-99.5 % and above purity-93 M3/Hr. Nitrogen-gaseous-99.6 to 99.8 % purity-125 M3/Hr. (Nitrogen

Compressor required for filling this Nitrogen into Cylinders- at extra cost.)

Production Cycle -III

Oxygen-gaseous-dry-99.5 % and above purity-93 M3/Hr. Nitrogen liquid 15 to 18 Ltrs. Per hour purity 99.9 %

Production Cycle -IV

Oxygen-gaseous-dry-99.5 % and above purity-70 M3/Hr. Nitrogen gaseous dry-Less than 10 PPM purity =

M3/Hr. Nitrogen gaseous dry-Less than 10 PPM purity = M3/Hr.

Technical Specification

Technical Data

Specifications 130 M3/Hr. 170 M3/Hr. 200 M3 / Hr.

Air Compressor Capacity 740 M3/Hr. 950 M3/Hr. 1150 M3/Hr.

Starting Pressure 40 Kg/cm2 40 Kg/cm2 40 Kg/cm2

Operating Pressure 30-35 kg/cm2 30-35 kg/cm2 30-35 kg/cm2

Starting time till production 7 Hrs. 7 Hrs. 7 Hrs.

Defrosting time 4/6 Hrs. 4/6 Hrs. 4/6 Hrs.

Defrosting cycle at normal condition 12 months 12 months 12 months

Power supply required420V 220V 3Phase

50 Hz

420V 220V

3Phase 50 Hz

420V 220V

3Phase 50 Hz

Rate through put of liquid Oxygen Pump 130 M3/Hr. 170 M3/Hr. 200 M3/Hr.

Delivery Pressure of pump 165 kg/cm2 165 kg/cm2 165 kg/cm2

Cylinder filling manifold 2 X 12 2 X 20 2 X 20

Cooling water requirement 40 M3/Hr. (Re-

circulated)

50 M3/Hr. (Re-

circulated)

70 M3/Hr. (Re-

circulated)

Make-up water requirement Approx. 0.5 M3/Hr.Approx. 0.5

M3/Hr.Approx. 1 M3/Hr.

Max. Individual item weight 8.5 Tons 10 Tons 11 Tons

Gross Weight 20 Tons (approx.) 32 Tons (approx.) 40 Tons (approx.)

Insulation Perlite. Perlite. Perlite.

Assembly Height 8.0 meters 9.2 meters 9.2 meters

Area required 200 sq.mtrs. 250 sq.mtrs. 350 sq.mtrs.

Material of constructionCopper, Brass,

Steel etc

Copper, Brass,

Steel etc

Copper, Brass,

Steel etc

Power consumption1.2 units/M3 of

Oxygen

1.0 units/M3 of

Oxygen

1.0 units/M3 of

Oxygen

<< back 1 | 2

Oxygen Gas Plant Nitrogen Gas Plant Acetylene Gas Plant

Nitrous Oxide Gas Plant Hydrostatic Cylinder Test Station Expansion Engine

Cylinder Safety Posters