overview of the ieee-sa process
DESCRIPTION
Overview of the IEEE-SA Process. Maintenance of IEEE standards. Soo H. Kim, Program Manager, Technical Program Development NPEC Subcommittee SC-3 Jan 24, 2011. Agenda. Overview of the Process Maintenance of IEEE Standards Reaffirmation Revision Withdraw - PowerPoint PPT PresentationTRANSCRIPT
Overview of the IEEE-SA ProcessMaintenance of IEEE standards
Soo H. Kim,Program Manager, Technical Program Development
NPEC Subcommittee SC-3Jan 24, 2011
Agenda
• Overview of the Process
• Maintenance of IEEE Standards• Reaffirmation• Revision• Withdraw
• Proposed Changes on Maintenance Process
• Resources
2
IEEE Standards Development: Process Flow
Idea!
Project Approval Process
Develop Draft
Standard
IEEE-SA Standards
Board Approval Process
Sponsor Ballot
Publish Standard
Maximum of 4 years
Reaffirm STD
Revise STD
Withdraw STDArchive
Maximum of 5 years
Maintenance of IEEE standards
Standards life cycle (5-year review) • Sponsor needs to take a maintenance action on a
standard within five years of its IEEE-SA Standards Board approval date.
• A maintenance action on an active standard are,• Revise a standard by submitting a PAR; • Reaffirm a standard by initiating reaffirmation ballot;• Withdraw a standard (administratively or withdrawal
ballot); or• Stabilize a standard by initiate stabilization ballot
• If no action are made at the end of a maintenance cycle, RevCom will make a default recommendation of withdrawal to IEEE-SA Standards Board
4
Maintenance of IEEE standards : Reaffirmation Process
Project Approval Process
Develop Draft
Standard
IEEE-SA Standards
Board Approval Process
Sponsor Ballot
Publish Standard
Maximum of 4 years
• Sponsor reviews the standard on the maintenance review to determine it contains no significant obsolete or erroneous information and is useful in its current form
Idea!
Reaffirm STD
Revise STD
Withdraw STDArchive
Maximum of 5 years
Project Approval Process
Develop Draft
Standard
IEEE-SA Standards
Board Approval Process
Sponsor Ballot
Publish Standard
Maximum of 4 years
Idea!
Reaffirm STD
Revise STD
Withdraw STDArchive
Maximum of 5 years
• Form a ballot group, and initiate reaffirmation ballot through myProject system.
Maintenance of IEEE standards : Reaffirmation Process
• Must be approved by at least 75% ballot group or reaffirmation ballot fails;
• The Sponsor shall review and respond to all ballot comments;
• Affirmative vote with comments• Provide comment response to show consideration. • Proceed with reaffirmation of standard
• Disapprove vote with comments• Determine if the technical comment is actual
significant technical error or omission. If so, may need to revise the standard.
• Provide response to show consideration and conduct recirculation.
• Submit to RevCom
Maintenance of IEEE standards : Reaffirmation Process
IEEE Standards Development: Reaffirmation of Standard
Project Approval Process
Develop Draft
Standard
IEEE-SA Standards
Board Approval Process
Sponsor Ballot
Publish Standard
Maximum of 4 years
Idea!
Reaffirm STD
Revise STD
Withdraw STDArchive
Maximum of 5 years
• Submit to Standard Review Committee (RevCom), a committee that makes a recommendation to IEEE-SA Standards Board for an approval of the reaffirmation.
• IEEE-SA Standards Board reviews the recommendation and
approve the draft standard.
Project Approval Process
Develop Draft
Standard
IEEE-SA Standards
Board Approval Process
Sponsor Ballot
Publish Standard
Maximum of 4 years
•The Sponsor shall initiate revision of a standard whenever any of the material in the standard (including all amendments, corrigenda, etc.) becomes obsolete or incorrect, or if three or more amendments to a base standard exist three years after its approval or most recent reaffirmation.
Idea!
Revise STD
Reaffirm STD
Withdraw STDArchive
Maximum of 5 years
Maintenance of IEEE standards : Revision Process
Project Approval Process
Develop Draft
Standard
IEEE-SA Standards
Board Approval Process
Sponsor Ballot
Publish Standard
Maximum of 4 years
• Standards that are no longer useful or contain significant obsolete or erroneous information should be recommended for withdrawal by the Sponsor.
• A recommendation for withdrawal shall be supported by a ballot with a 50% return and at least a 75% approval.
• If no action are made at the end of a maintenance cycle, RevCom will make a default recommendation of withdrawal to IEEE-SA Standards Board
Idea!
Reaffirm STD
Maximum of 5 years
Withdraw STDArchive
Revise STD
Maintenance of IEEE standards : Withdrawal Process
11
Maintenance of IEEE standards : Proposed Change
•Issues/concerns on Reaffirmation• Revisions PARs are not always initiated to resolve issues
raised during Reaffirmation• Reaffirmation ballots (and heavy workloads) have led to
cursory voting as many voters cast default 'yes' votes without really reviewing the standard(s);
•New proposal on Reaffirmation & Stabilization• Eliminate 'Reaffirmation' and 'Stabilization' process• Complete a Revision on a maintained standard every 10
years • Standard is administratively withdrawn at the 10 year
mark, if no action from the sponsor
Comments/Questions:
13
Resources:
IEEE-SA Website:http://standards.ieee.org/develop/
For more information…
Contact:
Ms. Soo Kim
Program Manager, Technical Program Development
732-465-6640