oval vacuum cups | contents - bms españa · www.fi pa.com 403 vacuum cups by size | oval vacuum...
TRANSCRIPT
401www.fi pa.com
Oval vacuum cups | Contents
Oval vacuum cups at a glance ....................................................................... 402
Oval vacuum cups ................................................................................................ 403
402 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups at a glance
Application / Benefi ts
Designs
> FIPA oval vacuum cups are available as fl at or bellows vacuum cups and with or without cleats > Cleats enhance stability and suction power > They also prevent the workpiece from being pulled into the cup > Slippage of the product in the aspirated state is prevented
Connection methods
> FIPA vacuum cups are attached to the machine via various connection methods:
Vacuum cups for mounting on the fi tting (plug-in) > More secure holding > Rapid exchange times > Cost-effective, since only the rubber part must be replaced
Vulcanized fi ttings / carrier plates > Very tight fi t > Handling can be secured against rotation > High form stability
> Oval vacuum cups are suitable for elongated workpieces where only minimal space is available (e.g. rails, profi les, products with lugs and protrusions, etc.)
> Also suitable for curved or cylindrical product surfaces (e.g. tubes, bolts)
> Signifi cantly increased suction force compared to round vacuum cups of the same width
403www.fi pa.com
Vacuum cups by size | Oval vacuum cups4x2 mm – 10x3 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
2,6
R1
Ø1,5
6
10
Connectionsee page
270.300 M5-male 449
Item no.:201.10X3.005._*
Material:NBR (sw), SI (tr) 0 mm
Additional sizes available are found on p. 66.Note: Suitable for cylindrical products Ø of 2-4 mm
NEW
Ø 1,5
Ø 3,5
4,51,
90,
8
7,5
3,8
Connectionsee page
270.025 M3-male 446
Item no.:132.7x4.002._*
Material:NBR (sw), SI (tr), SI-AS (sw), PU (bl) 0,8 mm
Additional sizes available are found on p. 59.
Ø 1
Ø 24,5
3
0,5
2,7
5
1,3
Connectionsee page
270.011 M3-male 446
Item no.:132.4x2.001._*
Material:NBR (sw), SI (tr), SI-AS (sw), PU (bl) 0,5 mm
Additional sizes available are found on p. 59.
Ø 2,4
Ø 3
Ø 6
Ø 1,4
0,7
6
2,3
3
4
7,5Connection
see page
270.014 M3-male 446
270.111 M4-male 446
270.300 M5-male 449
Item no.:132.7x4.034._*
Material:NBR (sw), HNBR (ge), SI (tr) 0,8 mm
Additional sizes available are found on p. 59.
BESTSELLER
Ø 2,6
Ø 4
Ø 6
Ø 1,2
0,5
6
2,5
3,5
2,5
4,3Connection
see page
270.014 M3-male 446
270.111 M4-male 446
270.300 M5-male 449
Item no.:132.4x2.031._*
Material:NBR (sw), HNBR (ge), NBR-AS (sw), SI (tr), SI-AS (sw), PU (bl)
0,5 mm
Additional sizes available are found on p. 59.
404 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups10x4 mm – 10x5 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
M 5
Ø 2,5
3,6
3,5
1
15,5
10
5 7
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.10x5.116._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
Ø 5
Ø 2,5
7
1
10
4,6 7
Connectionsee page
270.463 M5-male 450
270.339 M6-male 451
Item no.:132.10x4.003._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Ø 2,5
M 5
3,5
3,6
1
15,5
10
4,6 7
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.10x4.115._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
Ø 2
M 6
4
3,5
1
15,5
5 7
10See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.10x5.071._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Ø 4,7
Ø 2,5
7
1
10
75
Connectionsee page
270.463 M5-male 450
270.339 M6-male 451
Item no.:132.10x5.007._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
M 6
Ø 2
3,5
1
15,5
4
10
4,6 7
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.10x4.068._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Spare cu
p
Spar
e cu
p
Spar
e cu
p
Spar
e cu
p
405www.fi pa.com
Vacuum cups by size | Oval vacuum cups10x6 mm – 12x9 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 4
Ø 8
Ø 1,5
1
15
9,5
12
4
Connectionsee page
270.134 M5-male 447
270.347 M5-female 450
270.104 M6-male 451
270.033 G1/8-male 454
270.478 G1/8-female 459
Item no.:132.12x4.004._*
Material:NBR (gr), SI (tr) 0,5 mm
Additional sizes available are found on p. 59.
Ø 58
Ø 3
1
76 7
10
Connectionsee page
270.463 M5-male 450
270.339 M6-male 451
Item no.:132.10x6.011._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Ø 2,5
M 53,
5
15,5
1
3,6
10
6 7
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.10x6.117._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
9
Ø 1,57,6
12R 3,5
Connectionsee page
270.300 M5-male 449
Item no.:201.12x9.007._*
Material:NBR (sw), SI (tr) 0 mm
Additional sizes available are found on p. 66.Note: Suitable for cylindrical products Ø 6–13 mm
NEW
R2
Ø 1,5
5,7
10 5,4
Connectionsee page
270.300 M5-male 449
Item no.:201.10x6.006._*
Material:NBR (sw), SI (tr) 0 mm
Additional sizes available are found on p. 66.Note: Suitable for cylindrical products Ø of 3-7.5 mm
NEW
M 6
Ø 2
4
3,5
1
15,5
10
6 7
Item no.:130.10x6.073._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Spare cu
p
Spar
e cu
p
406 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups14x10 mm – 19x5 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 4,5
Ø 9
Ø 2
1,3
126
18 Connectionsee page
270.094 M5-male 449
270.005 M5-female 450
270.095 G1/8-male 456
270.096 G1/8-female 460
Item no.:132.18x6.012._*
Material:NBR (gr), SI (tr), PU (bl) 1 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 5
Ø 9
12
0,8
Ø 2
5
15 Connectionsee page
270.431 G1/8-male 456
Item no.:132.15X5.067.14
Material:HNBR (ge) 1 mm
Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 6
Ø 10
10
A
A 10
19
14
Item no.:132.14x10.048.3
Material:NR (sw) 0 mm
1,5
18,517
8
14,
5
Ø 2,5
Ø 4,6
Ø 12,5
3,2
4,7
Ø 9
1,5
Connectionsee page
270.013 M5-male 448
270.103 M6-male 451
270.003 G1/8-male 455
270.015 G1/8-female 459
Item no.:132.19x5.044.V
Material:Vinyl (bl) 0 mm
Ø 3,5Ø 5
8,56,5
15
8,5
Connectionsee page
270.536 M5-male 447
Item no.:132.15x8.5.33.3
Material:NR (sw) 2 mm
Ø 5
Ø 9
Ø 2
12
0,8
5
15 Connectionsee page
270.094 M5-male 449
270.005 M5-female 450
270.095 G1/8-male 456
270.096 G1/8-female 460
Item no.:132.15x5.008._*
Material:NBR (gr), SI (tr), PU (bl) 1 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
407www.fi pa.com
Vacuum cups by size | Oval vacuum cups20x4 mm – 20x5 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
M 5
Ø 2,5
3,6
3,5
1
15,5
20
5 7
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.20x5.119._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
Ø 2,5
7
1
20
4,3 7
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.20x4.005._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Ø 2,5
M 53,
51
15,5
3,6
20
74,3
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.20x4.118._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
M 6
4
3,5
1
15,
5
Ø 2
20
75
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.20x5.081._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Ø 2,5
7
1
20
5 7
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.20x5.009._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
M 6
Ø 9
Ø 2
4
3,5
1
15,5
20
4,3 7
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.20x4.069._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Spare cu
p
Spar
e cu
p
Spar
e cu
p
Spar
e cu
p
408 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups20x6 mm – 20x8 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
M 5
Ø 2,5
3,6
3,5
1
15,5
8
20 See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.20x8.121._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
Ø 2,7
7
1
20
6 7
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.20x6.013._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
M 5
Ø 2,5
3,6
3,5
1
15,5
6 7
20 See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.20x6.120._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
20
8
M 6
Ø 2
4
3,5
1
15,5
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.20x8.076._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
2,77
120
8
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.20x8.015._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
M 6
Ø 2
4
3,5
1
15,5
20
6 7
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.20x6.074._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Spare cu
p
Spar
e cu
p
Spar
e cu
p
Spar
e cu
p
409www.fi pa.com
Vacuum cups by size | Oval vacuum cups20x11 mm – 25x5 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 5
Ø 12,5
Ø 3
1,5
138,
5
24 Connectionsee page
270.431 G1/8-male 456
Item no.:132.24X8.066.14
Material:HNBR (ge) 1 mm
Ordering notes: Use of a gripper clamp (available separately) recommended.
23
R 6
11
Ø 8
9,5
10
Ø 4,5
Connectionsee page
270.310 M5-male 449
270.493 G1/8-male 458
270.494 G1/8-female 461
Item no.:9.23x11.036.2/21
Material:SI (tr) 0 mm
Additional sizes available are found on p. 66.Note: Suitable for cylindrical products with Ø 10-18 mm
Ø 2
2011
,5
1,4
19,5
10,5
11
Connectionsee page
270.022 M5-male 447
Item no.:132.20X11.077.2
Material:SI (tr) 1,5 mm
16
2
5
25
23
3
Ø 12,5
Ø 4,5
Ø 3
2 7,5
Ø 9
Connectionsee page
270.013 M5-male 448
270.005 M5-female 450
270.103 M6-male 451
270.003 G1/8-male 455
270.015 G1/8-female 459
270.194 G1/4-male 463
Item no.:132.25x5.045.V
Material:Vinyl (bl) 0 mm
Ø 4,5
Ø 11,5
Ø 3
1,3
128
24 Connectionsee page
270.094 M5-male 449
270.005 M5-female 450
270.095 G1/8-male 456
270.096 G1/8-female 460
Item no.:132.24x8.016._*
Material:NBR (gr), SI (tr), NR (bg), PU (bl) 1 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 6
Ø 10
23
11,
8
Ø 3
A
A
17
21
0,5
Connectionsee page
270.443 M5-male 448
270.238 G1/8-male 455
270.110 G1/8-female 460
270.534 G1/4-male 463
Item no.:132.21x17.047.3
Material:NR (sw) 0 mm
410 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups25x8 mm – 30x5 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
7
1
Ø 2,5
30
5 7
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.30x5.010._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
M 5
Ø 2,5
3,6
3,5
1
15,5
30
5 7
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.30x5.123._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
Ø 4,5
Ø 10
Ø 2,2
18,5
8
25
a
Connectionsee page
270.094 M5-male 449
270.005 M5-female 450
270.095 G1/8-male 456
270.096 G1/8-female 460
a = Wire strap stiffening
Item no.:138.25x8.002._*
Material:NBR (gr), SI (tr) 6 mm
Additional sizes available are found on p. 62.Ordering notes: Use of a gripper clamp (available separately) recommended.
BESTSELLER
30
5 7
M 6
Ø 2
4
3,5
1
15,5
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.30x5.072._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Ø 6
Ø 8
Ø 12
13
3
6
25
9
2 x Ø 2
Connectionsee page
270.037 M5-male 449
270.373 M6-male 452
270.085 G1/8-male 456
270.086 G1/8-female 460
Item no.:132.25x9.035.4
Material:NR (or) 0 mm
Spare cu
p
Spar
e cu
p
411www.fi pa.com
Vacuum cups by size | Oval vacuum cups30x6 mm – 30x8 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
M 5
Ø 2,5
3,5
1
15,5
3,6
30
8
Item no.:130.30x8.125._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
Ø 2,5
7
1
30
6 7
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.30x6.014._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
M 5
Ø 2,5
3,6
3,5
1
15,5
30
6 7
See page
50.152 10 mm 486
50.153 20 mm 486
Item no.:130.30x6.124._*
Material:NBR (sw), SI (tr), BR-AS (sw) 0,9 mm
Additional sizes available are found on p. 64.
30
8
M 6
4
3,5
1
15,5
Ø 2
Item no.:130.30x8.077._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Ø 2,77
1
8
30
Connectionsee page
270.464 M5-male 450
270.340 M6-male 451
Item no.:132.30x8.017._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
30
6 7
M 6
4
3,5
1
15,5
Ø 2
See page
50.095 20 mm 496
50.096 30 mm 496
50.097 40 mm 496
50.098 50 mm 496
Item no.:130.30x6.075._*
Material:NBR (sw), BR-AS (sw), SI (tr) 0,9 mm
Additional sizes available are found on p. 64.
Spare cu
p
Spar
e cu
p
Spar
e cu
p
Spar
e cu
p
412 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups30x10 mm – 36x12 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 10
Ø 19,5
8,5
24
Ø 14
35
28
Connectionsee page
270.177 M10-male 454
270.451 G1/4-male 464
270.452 G1/4-female 470
Item no.:138.35x28.001.V
Material:Vinyl (bl) 9 mm
Additional sizes available are found on p. 129.
BESTSELLER
27
4,5
4 12
30
1,522
Connectionsee page
270.439 G1/8-female 463
Item no.:132.30x12.025._*
Material:SI (tr), NR (sw) 1 mm
Ø 4,5
Ø 11,5
Ø 3,4
1,4
1210
30 Connectionsee page
270.094 M5-male 449
270.005 M5-female 450
270.095 G1/8-male 456
270.096 G1/8-female 460
Item no.:132.30x10.018._*
Material:NBR (gr), SI (tr), PU (bl) 2 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 5Ø 12
Ø 4
1,2
1212
36
Connectionsee page
270.094 M5-male 449
270.005 M5-female 450
270.095 G1/8-male 456
270.096 G1/8-female 460
Item no.:132.36x12.019._*
Material:NBR (gr), SI (tr), PU (bl) 2 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 5,5
10 14
Ø 10,5Ø 16
29
64
2,2
4,4
36
Connectionsee page
270.443 M5-male 448
270.238 G1/8-male 455
270.110 G1/8-female 460
270.534 G1/4-male 463
Item no.:132.32x29.041._*
Material:NR (bg), CR (sw) 0 mm
Ø 12
Ø 3,5
1,3
16,5
10
12
30
G 1/8
a
a = Aluminum
Item no.:130.30x12.057._*
Material:SI (tr), NR (sw) 1 mm
Additional sizes available are found on p. 63.
Spar
e cu
p
413www.fi pa.com
Vacuum cups by size | Oval vacuum cups36x12 mm – 40x20 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 5
Ø 12
Ø 4
12
1,6
36
12
Connectionsee page
270.431 G1/8-male 456
Item no.:132.36X12.068.14
Material:HNBR (ge) 2 mm
Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 6
Ø 11
Ø 16
2,2
4,4
10 15 1939
37Connection
see page
270.443 M5-male 448
270.238 G1/8-male 455
270.110 G1/8-female 460
270.534 G1/4-male 463
Item no.:132.39x37.042._*
Material:NR (sw), NR (bg) 0 mm
3237
4,5
4 12
40
Connectionsee page
270.440 G1/8-female 463
Item no.:132.40x12.027._*
Material:SI (tr), NR (sw) 1 mm
19
5 2
7,5
1/8 NPT Ø 5
9
28
38
8
Item no.:130.38x19.085.V
Material:Vinyl (bl) 0 mm
G 1/8Ø 12
Ø 3,540
1,410
,5 16,5
12
40
a
a = Aluminum
Item no.:130.40x12.058._*
Material:SI (tr), NR (sw) 1 mm
Additional sizes available are found on p. 63.
39
2,9 9
,519
,5
32 a
a = Steel
Item no.:9.40x20.041._*
Material:NBR (gr), SI (tr), PU (bg) 2 mm
Ordering notes: Customized drilling patterns available on request
Spar
e cu
p
414 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups40x20 mm – 45x15 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
32
2010
40
2,4
Ø 3
22
2 x M 4
a
a = Steel
Item no.:9.40x20.057.2
Material:SI (tr) 2 mm
34 30
3 3
10
42
24
18
10
Ø 3,3
Item no.:130.42x18.037.2
Material:SI (tr) 2,5 mm
Ø 12
Ø 16,5
Ø 4
2,4
2215
44Connection
see page
270.097 G1/4-male 464
270.098 G1/4-female 471
Item no.:132.45x15.020._*
Material:NBR (gr), SI (tr), PU (bl) 3 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
2,4
40,7
13,3
Ø 8,5
40
35
Ø 10 M4
6
a
a = Steel
Item no.:155.40x35.004.1
Material:NBR (gr) 2,5 mm
22
Ø 5 39
19 43
12
15
Connectionsee page
270.013 M5-male 448
Item no.:138.43x15.001.V
Material:Vinyl (bl) 8 mm
Ø 12
Ø 16,5
Ø 4
22
2,4
44
15
Connectionsee page
270.097 G1/4-male 464
270.098 G1/4-female 471
Item no.:132.45X15.064.14
Material:HNBR (ge) 3 mm
Ordering notes: Use of a gripper clamp (available separately) recommended.
415www.fi pa.com
Vacuum cups by size | Oval vacuum cups45x15 mm – 50x20 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
15
45
Ø 10,5
Ø 17,5
Ø 4,229a
Connectionsee page
270.097 G1/4-male 464
270.098 G1/4-female 471
a = Wire strap stiffening
Item no.:138.45x15.003._*
Material:NBR (gr), SI (tr) 8 mm
Additional sizes available are found on p. 62.Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 10
Ø 14
Ø 19,5
9,5
26
45
28
Connectionsee page
270.177 M10-male 454
270.451 G1/4-male 464
270.452 G1/4-female 470
Item no.:138.45x28.013.V
Material:Vinyl (bl) 9 mm
Additional sizes available are found on p. 129.
BESTSELLER
41
10
2,3
51
21
a
a = Steel
Item no.:9.50x20.001._*
Material:NBR (gr), SI (tr) 2 mm
Ordering notes: Customized drilling patterns available on request
Ø 5
40
46
8
Ø 8
22
2,9
16
2,5
Connectionsee page
270.310 M5-male 449
270.493 G1/8-male 458
270.494 G1/8-female 461
Item no.:9.45x15.038._*
Material:NBR (sw), SI (tr) 3 mm
G 1/8
Ø 8
50
2,1 12
,5
206
52
Item no.:130.50x20.102.1
Material:NBR (gr) 3 mm
1,5
51
M4 M5
9,5
20
41
22
a
a = Aluminum
Item no.:9.50x20.034._*
Material:NBR (gr), SI (tr) 2 mm
416 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups50x25 mm – 55x12 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 4
50
36
8
M 10
25
7
SW 5
Item no.:130.50x25.094._*
Material:NBR (sw), SI (tr) 8 mm
3,1
Ø 50
Ø 11
3012
Ø 634
6
Connectionsee page
270.312/19 M6-male 452
Item no.:9.50x30.039._*
Material:NBR (sw), SI (tr) 2 mm
G 1/8
Ø 12
Ø 3,51,5
16,5
10
12
55
a
a = Aluminum
Item no.:130.55x12.082._*
Material:NBR (sw), SI (tr), NR (sw) 1 mm
Additional sizes available are found on p. 63.
Ø 10
Ø 20
Ø 4
3,4
13
24
50
30
Connectionsee page
270.443 M5-male 448
270.238 G1/8-male 455
270.110 G1/8-female 460
270.534 G1/4-male 463
Item no.:132.50x30.030._*
Material:NBR (gr), SBR (br) 5 mm
40
28
13
1,2
53 26
Connectionsee page
270.508 G1/8-female 479
Item no.:209.52x25.006.2
Material:SI (tr) 13 mm
Additional sizes available are found on p. 146.Ordering notes: On request, available with wire reinforcement
47
52
4,5
4 12
55
Connectionsee page
270.441 G1/8-female 463
Item no.:132.55x12.029._*
Material:NBR (sw), SI (tr), NR (sw) 1 mm
Spare cup
417www.fi pa.com
Vacuum cups by size | Oval vacuum cups60x20 mm – 62x42 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 11,5
Ø 16,5
Ø 4
2,2
22
60
20
Connectionsee page
270.097 G1/4-male 464
270.098 G1/4-female 471
Item no.:132.60x20.022._*
Material:NBR (gr), SI (tr), PU (bg) 3 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
60
48 17,5
1,2
29
27
Connectionsee page
270.509 G1/4-female 479
Item no.:209.60x29.001._*
Material:NBR (sw), SI (tr) 13 mm
Additional sizes available are found on p. 146.Ordering notes: On request, available with wire reinforcement
42
60
13
M440
2,5
Ø 18
6
a
a = Steel
Item no.:155.60x42.005.1
Material:NBR (gr) 2,5 mm
60
20
13
34
51 a
a = Steel
Item no.:9.60x20.003._*
Material:SBR (sw), NR (bg) 4 mm
Ordering notes: Customized drilling patterns available on request
G 3/8
52
Ø 17
Ø 5,5
1,8 14
3732
60
6,5
5a
18
a = Aluminum
Item no.:130.60x38.091.1
Material:NBR (gr) 2 mm
Ø 9Ø 18
Ø 12
22
62
42
10
Item no.:130.62x42.111.11
Material:Vulkollan® (br) 7 mm
Note: Especially well-suited for handling soaps
418 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups63x41 mm – 75x25 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 5
Ø 19
23
63
41
14
Connectionsee page
270.443 M5-male 448
270.238 G1/8-male 455
270.110 G1/8-female 460
270.534 G1/4-male 463
Item no.:132.60x42.052.2
Material:SI (g) 8 mm
Note: Especially well-suited for handling soaps
Ø 7,5
60
2
13
69
32
37
Connectionsee page
270.312/19 M6-male 452
270.030 G1/8-male 457
270.019 G1/8-female 461
Item no.:132.69x32.060.4
Material:NR (bg) 2 mm
70
23,
5
35
58,5
21
41
G 3/8
Ø 4
SW 6
Item no.:130.70x35.089.3
Material:NR (sw) 6 mm
Ø 6
G 1/8
13
40
7,5
28
67
SW 17 a
a = Aluminum
Item no.:130.67x28.104.11
Material:Vulkollan® (br) 7 mm
70
36
30
M 10 Ø 4
SW 5
8
6
Item no.:130.70x30.095._*
Material:NBR (sw), SI (tr) 8 mm
M 6 G 1/8
68
14
2,8
18 25
75
a
a = Aluminum
Item no.:130.75x25.080._*
Material:NBR (sw), SI (r) 3 mm
419www.fi pa.com
Vacuum cups by size | Oval vacuum cups75x25 mm – 80x40 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 11
Ø 17,5
22
Ø 3,5
3
75
25
Connectionsee page
270.097 G1/4-male 464
270.098 G1/4-female 471
Item no.:132.75x25.023._*
Material:NBR (gr), SI (tr) 3 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
67
37
17
1,2
30
R18
80
Connectionsee page
270.392 G1/4-female 479
Item no.:201.79x29.002.2
Material:SI (tr) 16 mm
Item group description: Use: For cylindrical productsAdditional sizes available are found on p. 146.Ordering notes: On request, available with wire reinforcement
6
30
80
5
14
a
a = Aluminum
Item no.:9.80x30.004.4
Material:NR (br) 5 mm
Ordering notes: Customized drilling patterns available on request
Ø 10,5
Ø 17,5
35
Ø 6
75
25
a
Connectionsee page
270.097 G1/4-male 464
270.098 G1/4-female 471
a = Wire strap stiffening
Item no.:138.75x25.004._*
Material:NBR (gr), SI (tr) 11 mm
Additional sizes available are found on p. 62.Ordering notes: Use of a gripper clamp (available separately) recommended.
69
6075
18
925
34
1,6
81 31
Connectionsee page
270.392 G1/4-female 479
Item no.:209.80x30.003.2
Material:SI (tr) 20 mm
Additional sizes available are found on p. 146.Ordering notes: On request, available with wire reinforcement
68
5974
33
28
1934
1
80 40
Connectionsee page
270.510 G1/4-female 479
Item no.:209.80x40.004.2
Material:SI (tr) 20 mm
Additional sizes available are found on p. 146.Ordering notes: On request, available with wire reinforcement
420 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups80x50 mm – 97x55 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
67
33
57
37
27
74 44
1,6
80 50
Connectionsee page
270.511 G1/4-female 479
Item no.:209.80x50.005.2
Material:SI (tr) 20 mm
Additional sizes available are found on p. 146.Ordering notes: On request, available with wire reinforcement
G 1/4
Ø 75
21,5
5
Ø 21
50
90
a
a = Aluminum
Item no.:130.90x50.113.4
Material:NR (bg) 5 mm
Additional sizes available are found on p. 185.
NEW
G 1/8 M 684
16,5
5
93
17 26
a
a = Aluminum
Item no.:130.96x27.036.2
Material:SI (r) 6 mm
55
85
19 8
5,5
62a
a = Aluminum
Item no.:9.85x55.006._*
Material:NBR (gr), NR (bg) 7 mm
Ordering notes: Customized drilling patterns available on request
Ø 18 # 90
# 9216
,56
3,5
a
a = Steel
Item no.:130.92x92.006.1
Material:NBR (gr) 3 mm
G 3/8
76
35 25
35
99
58
a
a = Aluminum
Item no.:130.97x55.126.V
Material:Vinyl (bl) 11 mm
Additional sizes available are found on p. 129.
421www.fi pa.com
Vacuum cups by size | Oval vacuum cups100x30 mm – 100x40 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
21
101
120
305
6
31
a
a = Steel
Item no.:9.100x30.007._*
Material:NBR (gr), SBR (br) 5 mm
Ordering notes: Customized drilling patterns available on request
2
Ø 5,5
30
32
112
14
100125
6
G1/4
a
a = Steel
Item no.:130.100x32.42.1
Material:NBR (gr) 2 mm
101
6,5
41
M10
37
Ø 4
SW5
8
a
a = Steel
Item no.:130.100x40.096._*
Material:NBR (sw), SI (tr) 8 mm
Ø 18
613
M 4
2,5
32
100
a
60
a = Aluminum
Item no.:130.100x32.067.1
Material:NBR (gr) 2,5 mm
Ø 11,5
Ø 17,5
Ø 8
22
3,1
100
35
a
Connectionsee page
270.097 G1/4-male 464
270.098 G1/4-female 471
a = Aluminum
Item no.:132.100x35.26.1
Material:NBR (sw) 3 mm
Additional sizes available are found on p. 59.Ordering notes: Use of a gripper clamp (available separately) recommended.
Ø 6
G 1/8
1339
7,5
SW 17
40
100
a
a = Aluminum
Item no.:130.100x40.105.11
Material:Vulkollan® (br) 7 mm
422 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups100x55 mm – 111x31 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
99
53
Ø 8 Ø 878
22,
5
33
9
ab
a = Aluminum b = Sealed with rubber
Item no.:9.100x55.020.4
Material:NR (or) 8 mm Additional sizes available are found on p. 68, 186.
113
43
87
19,5
17
8,5
a
a = Steel
Item no.:9.110x40.009._*
Material:NBR (gr), NR (br) 9 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Version with aluminum carrier: 9.110x40.011._
103
95
G 1/8 M 5 M 5
110
30
80
19
7,5
a
b
a = Aluminum b = Sponge rubber EPDM
Item no.:133.111x31.3.15
Material:EPDM (sw) 1 mm
Additional sizes available are found on p. 88.Note: Foam sealing lip equalizes product unevenness
423www.fi pa.com
Vacuum cups by size | Oval vacuum cups120x30 mm – 120x90 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
121
2,9
11
112
30,5
6
a
a = Steel
Item no.:9.120x30.062.1gr
Material:NBR (gr) 3 mm Ordering notes: Customized drilling patterns available on request
10
2,7
M12
17
87
108
119 9
9
a
a = Aluminum
Item no.:155.120x90.2._*
Material:NBR (sw), SI (tr) 1,5 mm
77
67
87
106
95
82
116
17 2,6
54
10
Item no.:216.120x90.2._*
Material:NBR (sw), SI (tr) 1,5 mm
Spare cu
p
424 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups125x55 mm – 135x75 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
126
56
103
19,5
32,51
6
a
a = Steel
Item no.:9.125x55.012._*
Material:NBR (gr), SBR (br), NR (br) 9 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
9760
G3/8 M8
M640135
33
Ø22
Ø65
8,5
a
a = Aluminum
Item no.:130.135x65.43.3
Material:NR (sw) 8 mm
91
28
14
135
75
a
a = Steel
Item no.:9.135x75.066.13sw
Material:SBR (sw) 12 mm Note: Especially well-suited for rough surfaces
425www.fi pa.com
Vacuum cups by size | Oval vacuum cups145x34 mm – 150x55 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
G 1/4 M 6
134
17
7
144
24 34
a
a = Aluminum
Item no.:130.145x34.55._*
Material:NBR (sw), SI (r) 7 mm
151
56
128
19,5
33
6
a
a = Steel
Item no.:9.150x55.013.1
Material:NBR (gr) 7 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
150
55
Ø 8 Ø 8
128
22,
5
33
9
ab
a = Aluminum b = Sealed with rubber
Item no.:9.150x55.083.4
Material:NR (or) 8 mm Additional sizes available are found on p. 68, 186.
426 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups150x75 mm – 152x51 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
a
1811
1372,
7 M12
74
148
113
a = Aluminum
Item no.:155.150x75.3.1
Material:NBR (sw) 1,5 mm
128
137
113
17 2,7
54
63
42
148 74
Item no.:216.150x75.3.1
Material:NBR (sw) 1,5 mm
M 12
133
25 7,5
32
152
51
a
a = Aluminum
Item no.:130.152x51.092.V
Material:Vinyl (bl) 7 mm
Spare cu
p
427www.fi pa.com
Vacuum cups by size | Oval vacuum cups160x80 mm – 190x90 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
Ø 25
15
45
Ø 8
9,5 30
80
160
G 3/8
Item no.:9.160x80.075.13
Material:SBR (sw) 9 mm
G 1/4Ø 9170
19
190
905,
2
Z
z
104
a
a = Aluminum
Item no.:9.190x90.061.4-AL
Material:NR (bg) 5,5 mm Additional sizes available are found on p. 185.
BESTSELLER
190
90
161 61
22 8,5
a
a = Steel
Item no.:9.200x100.015._*
Material:NBR (gr), SBR (sw), NR (br) 8 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Version with aluminum carrier: 9.200x100.054._
428 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups200x20 mm – 200x35 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
20
6 1
9,5
20
4,2200
220
a
a = Steel
Item no.:9.200x20.063.1gr
Material:NBR (gr) 5 mm Ordering notes: Customized drilling patterns available on request
200
4,2
6
20
220
3029
a
a = Steel
Item no.:9.200x30.031._*
Material:SBR (br), NBR (gr) 4 mm Ordering notes: Customized drilling patterns available on request
25
30 33
200
198
10
6
a
a = Steel
Item no.:9.200x35.065._*
Material:NBR (gr), PU (bg) 10 mm Ordering notes: Customized drilling patterns available on request
429www.fi pa.com
Vacuum cups by size | Oval vacuum cups200x40 mm – 200x55 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
195
36
19
176
6
6
a
a = Steel
Item no.:9.200x40.010._*
Material:SBR (br), NBR (gr) 9 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Version with aluminum carrier: 9.200x40.030._*Customized drilling patterns available on request
178
1955
200
32,5
6,3
a
a = Steel
Item no.:9.200x55.014.1
Material:NBR (gr) 7 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
55
200
33
9
178
22,
5
Ø 8 Ø 8 a
b
a = Aluminum b = Sealed with rubber
Item no.:9.200x55.020.4
Material:NR (or) 8 mm Additional sizes available are found on p. 68, 186.
430 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups200x80 mm – 204x76 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
160
18
200
80
40
4,1
a
a = Steel
Item no.:9.200x80.067.13sw
Material:SBR (sw) 4 mm Ordering notes: Customized drilling patterns available on request
63
140,6
196
40,6
2260
96
220
110
a
a = Aluminum
Item no.:138.200x100.005._*
Material:SBR (br), NBR (gr) 41 mm
Ordering notes: With steel wire reinforcement in the fold: 138.200x100.006._* Customized drilling patterns available on request
28
13
180
9
G1/4
76
204
127
53
a
a = Aluminum
Item no.:130.204x76.86.V
Material:Vinyl (bl) 8 mm
431www.fi pa.com
Vacuum cups by size | Oval vacuum cups205x82 mm – 250x55 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
34
202 176
Ø 25175
528458
a
a = Aluminum
Item no.:137.205x82.1.V
Material:Vinyl (bl) 25 mm
G 1/2
M 6 G 1/821
200
7,5
210
50a
b
a = Aluminum b = Sponge rubber EPDM
Item no.:133.211x51.4.15
Material:EPDM (sw) 1 mm
Additional sizes available are found on p. 88.Note: Foam sealing lip equalizes product unevenness
228
19
250
55
33
6
a
a = Steel
Item no.:9.250x55.016._*
Material:NBR (gr), NR (br) 8 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
432 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups250x80 mm – 285x107 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
80
220
26
250
8
9
a
a = Steel
Item no.:9.250x80.033._*
Material:NBR (gr), SBR (br), NR (br) 10 mm Ordering notes: Customized drilling patterns available on request
250
2510
0278
729
a
a = Steel
Item no.:9.280x100.017._*
Material:NBR (gr), SBR (br) 10 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Version with aluminum carrier: 9.280x100.018._
249
2110
7
285
70,6
6
a
a = Steel
Item no.:9.280x107.070.13rb
Material:SBR (br) 6 mm Ordering notes: Customized drilling patterns available on request
433www.fi pa.com
Vacuum cups by size | Oval vacuum cups300x30 mm – 300x55 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
320
29 306
4,2
20
300
a
a = Steel
Item no.:9.300x30.069.1gr
Material:NBR (gr) 5 mm Ordering notes: Customized drilling patterns available on request
300
22
6
6
320
30 40
a
a = Steel
Item no.:9.300x40.064.1gr
Material:NBR (gr) 7 mm Ordering notes: Customized drilling patterns available on request
263
275
281
21
3,5
9,5
300
55
24
30
36
7,6
Connectionsee page
270.332 Without 478
Item no.:9.290x55.071.1gr
Material:NBR (gr) 7 mm
434 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups300x55 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
300
55
277 33
19,5
6
a
a = Steel
Item no.:9.300x55.019.1
Material:NBR (gr) 8 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
276
300
55
8
6,5
23
a
a = Aluminum
Item no.:9.300x55.020.1
Material:NBR (gr) 8 mm Ordering notes: Customized drilling patterns available on request
435www.fi pa.com
Vacuum cups by size | Oval vacuum cups300x55 mm – 300x100 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
300
55
Ø 8Ø 8
278
22,
5
33
9
b a
a = Aluminum b = Sealed with rubber
Item no.:9.300x55.046.4
Material:NR (or) 8 mm Additional sizes available are found on p. 68, 186.
G1/4
10
266
66 100
300
259
40
70
M6
92
255
a
a = Steel
Item no.:130.300x100.1.1
Material:NBR (gr) 9 mm
436 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups300x115 mm – 300x120 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
250
32
295
115
71
12,510
a
a = Steel beam divided (flexible)
Item no.:9.300x115.068.1gr
Material:NBR (gr) 14 mm Ordering notes: Customized drilling patterns available on request
SUITABLE FOR PIPES
251
34
302
123
71
16
a
a = Steel
Item no.:9.300x120.021._*
Material:NBR (gr), SBR (br) 17 mm Ordering notes: Customized drilling patterns available on request
437www.fi pa.com
Vacuum cups by size | Oval vacuum cups300x150 mm – 350x100 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
231
59
244
300
160
310
21
81
94
150
a
a = Steel
Item no.:138.300x150.007._*
Material:SBR (br), NBR (gr) 39 mm
Ordering notes: With vulcanized metal reinforcement in the fold: 138.300x150.008._*
298
350
57 1
20
301 50 23,1
48,4
99,8
359
a
a = Steel
Item no.:138.350x100.009._*
Material:SBR (br), NBR (gr) 39 mm
Ordering notes: With vulcanized metal reinforcement in the fold: 138.350x100.010._*
438 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups370x70 mm – 400x200 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
349
377
8126
53
9
a
a = Steel
Item no.:9.370x70.022._*
Material:NBR (gr), SBR (br) 10 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Version with aluminum carrier: 9.370x70.023._
340
400
58
332
140
130
18
200
410
210
a
a = Steel
Item no.:138.400x200.011._*
Material:SBR (br), NBR (gr) 39 mm
Ordering notes: With vulcanized metal reinforcement in the fold: 138.400x200.012._*
439www.fi pa.com
Vacuum cups by size | Oval vacuum cups430x180 mm – 450x130 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
180
430
20
6
6
402a
a = Steel
Item no.:9.430x180.024._*
Material:SBR (sw), NBR (gr), PU (bg) 6 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
420
449
102
131
19,5
6,5
a
a = Steel
Item no.:9.450x130.025._*
Material:NBR (gr), SBR (br) 6 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
440 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups450x150 mm – 470x60 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
423
23
7,5
450
123
150
a
a = Steel
Item no.:9.450x150.026._*
Material:NBR (gr), SBR (sw) 9 mm Ordering notes: Customized drilling patterns available on request
27
8
12
470
60
a
a = Steel
Item no.:9.470x60.072._*
Material:NBR (gr), SBR (sw), NR (br) 12 mm Ordering notes: Customized drilling patterns available on request
441www.fi pa.com
Vacuum cups by size | Oval vacuum cups470x470 mm – 500x180 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
470�
22
8
7
a
a = Steel
Item no.:9.470x470.027.13sw
Material:SBR (sw) 6 mm Ordering notes: Customized drilling patterns available on request
180
500
40
8
18
a
a = Steel
Item no.:9.500x180.028._*
Material:NBR (gr), SBR (sw) 21 mm Ordering notes: Customized drilling patterns available on request
442 Phone +49 (0)89 / 96 24 89 – 0
Vacuum cups by size | Oval vacuum cups580x180 mm – 750x200 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
552
570
2517
9
579
150
9
a
a = Steel
Item no.:9.580x180.029._*
Material:NBR (gr), SBR (br) 10 mm
Additional sizes available are found on p. 68, 186.Ordering notes: Customized drilling patterns available on request
200
750
54
26
15a
a = Steel
Item no.:9.750x200.049.13rb
Material:SBR (br) 29 mm Ordering notes: Customized drilling patterns available on request
443www.fi pa.com
Vacuum cups by size | Oval vacuum cups800x400 mm
* When ordering please add the appropriate material code to the item no. You will find it in the foldout.
700
39
792
392
300
17,5
a
a = Steel
Item no.:9.800x400.048._*
Material:SBR (br), NBR (gr) 20 mm Ordering notes: Customized drilling patterns available on request