outstanding practical use 3d-plant cad system
TRANSCRIPT
Outstanding practical use 3D-Plant CAD system
http://www.intergraph.com/global/jp/ppm/EYECADhome.aspx
ver.6.81
Wanted「Innovative」Standand is here !
EYESUPT®
Piping Support Design System
EYEPRDPipe Pressure Loss CalculationSystem
EYESTEEL®
Converter for steel-structureanalysis
EYEPFA®
Converter for pipe stressanalysis system
Option Software
General reference DBmanagement system
EYESPEC
EYEPID®P&ID Design System
EYEVIEW®3D design reviewing system
EYELIST®Excel®-based edit/sort &classification system
EYEVIEW shows plant image to review practical installation of equipment and operation space.
EYEPIPE®3D Plant・Piping design
system
Procurement
Line list/Equipment list
Valves,Accessories,InstrumentsBill of material
EYEPIDOutput Software
300 piping spec-classes installed
Improve accuracy of quotation in bidding1. Cost calculation for construction at the proposal stage Immediate calculation of construction cost at proposal phase2. Image document preparation for bidding Attractive/realistic presentation materials instantly-prepared
POINT
1
Improve design quality1. Accurate drawing dimension Indicate accurate or summarized dimensions when appropriate.2. Effective operation and Maintenance with EYEVIEW Comprehensive designing system for pre-study of functions, safety, operability, maintainability, feasibility of inspection and construction, and good appearance
POINT
2
Shorten schedule1. Introduction of ef�cient designing process On-site assembly of construction should be ef�cient, realizesto shorten the period by 20% - 31%.2. Shortening of construction period with prefabrication rate increased With prefabrication-rate over 90%, most of on-site works are the assembling, resulting in shortening of period by 31 % on ave., compared to the traditional designing process..
POINT
4
Reduce CostsPOINT
5
Improve construction quality1. Reduction of on-site manual corrections High design quality leads to safe construction as well.2. Improvement of welding-quality Prefabrication at proper place delivers ef�cient welding and cost-reduction.
POINT
3
SOLUTION
1
EYECAD® is outstanding solution for remarkable reductionof EPC period and costEYECAD is truly user-oriented/friendly solution with high reliability,developed by skilled-plant engineers with sufficient field experience.
EYECAD is a considerably practical CAD system for 3-D spatial plant design,which has been uniquelydeveloped based on our abundant experience as a leading engineering company.
1. Designing Cost Various data of change requirements can be transferred at customer-site to design engineer, leading to shortening the designing process..2. Construction cost No design change due to con�ict at site, and proper material control result in no surplus stock and waiting time of workers.3. Material cost Calculating correct/required quantity of material and immediate procurement on each phase save data collection time for for quotation, and avoid surplus stock.4. Inspection cost Outputting the data of implementation test spec, test loop �gure, and welding point spec reduce the costs on each phase.
●The plant model is interactively created on the display.
●High quality space design is achieved by checking the consistency and excellence at each phase of the design.
●The design input data are managed and utilized as
integrated engineering data.
●Semi-Automatic and high speed output of each drawing is available.
※1 Microsoft社製
●Manual Design, 2D-CAD
●EYECAD
ProcessPlan Design
Site,Framework & Plot Plan
EquipmentSpec.List
P&ID
EquipmentLayoutDrawing
FrameworkDrawing
Process PlanSite,
FrameworkPlot Plan
EquipmentSpec P&ID
Line List andB/Q of Valve
and Instrument
Frame,structureStairs,handrail
EquipmentShape/Nozzle
Input
Piping,Duct& SupportInput
OveralladjustmentCorrection
input
Material &construction
volume calculationTotal CostEstimation
Pipe-AssemblingDrawing
Check & Correction on drawing
Spool Drawing
Design Review Crash/
ConformityCheck
●P&ID is prepared as logical diagram from the basic design phase.
●Various integrated general data realize quick cost calculation, early material procurement/generationof final drawing.
●Visually scrutiny and study of plant design
for operability,safety, and maintainability can be feasible with owner in the middle phase of designing for better result.
●Offering the material by each construction phase or area saves the place to be stored and its control.
●Quick calculation of material cost data, required for procurement and construction, can be performed.
●Early and systematic procurement work
●High accuracy/rate of pre-fabrication is assured by leveraging the fabrication spec,
pipe-cut plan,curve data,welding information,and test-loop figure,etc.
●Minimizing on-site reworks,repair and welding
●Reducing on-site work including construction.
and Enhancing the productivity and safety of construction.
Ediit &O/P of
Support &G/A DWGs
SystematicMaterialProcure
Material receiptof each
constructionsection
Pre-Fabrication
(90%)
On-Siteajustment
&Installation
On-Sitemodification
SupportDrawing
MaterialsProcurement
On-sitemanufacturing& Installation
On-siteModification
Prefabrication(60%)
Bill ofMaterials
Total CostEstimation
Professional Research and Development for the system incorporating the current needs and plant engineering
�●System centerPowerful Training/Support system: sufficient assistance after introduction
�●�Support center
Reduceconstruction
period
ReduceDesigningperiod
Reduce Time
QUICKLY ON STREAM UPON INSTALLATIONSYSTEM
EYECAD EngineeringEFFECT
3-D Plant・Piping Design System
EYEPIPE®
column No.,floor,frame,structure,hand-rail,stairs,equipment,piping duct,(piping support)overall plant & equipment layout,clash check3D piping assembly,spool drawing,MTO, pipe line list,piping construction B/Q,inspectionspec/list,etc.equipment skeleton drawing,framing plan,member MTOConversion to DXF(Model)
P&ID Design System
EYEPID®
PFD、UFD、P&IDline list,equipment listvalve,accessary & instrument B/Q,data transfer to 3DDrawing output in color by attributionpiping consistency check between P&ID and 3DP&ID Data Conversion to DXF
General reference DB managementsystem
EYESPECPlant basic information setting of;piping material,valve/symbol/fluid/insulation standardsJOB division,terms,material grade,shape,basicstandard code piping component dimension,weight,price,construction time equipment spec,branching table,pipe way space,etc.
3-D Design Reviewing System
EYEVIEW®
EYEVIEW-LTPlant design review & communication system measurement, scale box & tag-comment, plant model hard copy
EYEexport 3D Conversion of plant model to DXF & VRML,others for some viewers,
2
Readily available system, Upgrade of existing job data is just a click away!
EYECAD Flow of Engineering,Procure,Construction and Its Effect
Piping support & fastener modelingFAB drawing,update of shape position todrawing,MTOConversion of data to 2D-DXF
Pipe-run index,valve,accessory,instrumentpiping fittings,B&N,gasket,insulationB/Q (length,weight,inch-m,DIA-Inch,painting area,internal volume)cut-pipe,pipe cut-plan,Bill of PMS-defined components withcommoditycodeWelding-point information,managementsystem of piping material ordering
Piping support design system
EYESUPT®
Pipe-run index,valve,accessory,instrument
model creation for piping stress analysissoftwaremodel creation for piping stress analysis
Data conversion to pipeheat-stress analysis system
EYEPFA®
detailed MTO,data edit & sort& classificationsystem based on Excel
EYELIST®
Pipe Pressure Loss Excel※1
CALC System
EYEPRD
model creation for steel structureanalysis softwaremodel creation for steel structure
Convert to Structure StressAnalysis System
EYESTEEL®
Piece drawing for piping fabrication &inspectionPiece drawing for piping fabrication &
Other option system
EYEPIECE
Option Sub-System
Auto-conversion of length between inputpoints to equivalent piping length,velocity,Re,auto-calculation of pressureloss between different heights of pipes
統合3次元プラント設計CADシステム
EYECAD provides the out-of-the-box practical engineering tool with wide range of standard database already equipped,covering from FEED through field engineering,especially for onsite operation. Now over half of domestic designing divisions have taken advantage of EYECAD in their process. For the past 22 years, EYECAD has been utilized for designing, procurement and construction of around half of the 3D plant models within the country,which released Version 6.0 in May/2002, version 6.81 in May/2012.Version 6.81,and have provided more than 600 additional functions and improvements.
3
®
Integrated 3D Plant CAD SYSTEM
No. File EXT Import Export(Required EYEexport3D) 1 VRML1.0 wrl ○ ○ 2 Point-clouds※ asc ○ - 3 STL stl ○(binary format is on V6.81 ) Planned on V6.90 4 OpenInventor iv ○ Planned on V6.90 5 DXF dxf Planned on V6.90 ○(O/P on 3D-FACE entity) 6 DWG dwg ○ Planned on V6.90 7 DGN dgn ○ Planned on V6.90
O S : 32bit Windows® XP,Vista,7 or
64bit Windows® 7
Required Office Soft : Excel 2000 Upper
CPU : Core i5,i7~
Graphic Board : NVIDIA Qurdro,Geoforce Series
Memory : more than 4GB
Monitor Size : larger than 24 inch, Resolution:more than 1024x768
system requirements
EYECAD 3D Model Import/Export File list ※1Line-1Point x,y,z,i devided by space ASCII File
First release : 1990.04
Actual achievement :
more than 2,400 (including export)
Installed customers : More than 190 Sites
Price : Refer to the Price List.
Total work flow & execution button screen EYECAD®
Each Valve Fitting spec dimensionsediting window
PMS Indexwindow
PMS Indexlist
Valve specification with dimensions
Valve specification list
プラント属性 標準参照D.B.作成管理システム
1) EYESPEC can make a plant attribute and (:STD) of piping materials and valves or so,which is basic EYECAD use.It is an exclusive use system of the (:D.B.) creation for EYECAD user companies and subcontractors.
2) Provides a wide range of out-of-the-box data including public standard such as JIS,JPI, ISO,ASME and API,and more than 50 manufacturers'specific standard allowing to be changed and added by a proj.
3) Pre-installed database for piping material standard (PMS),valve standard,various drawing symbol and dimension.It easily utilizes as a project standard through copy,modification and addition,and can be exported in text and Excel formats for project documentation.
4
EYESPEC
The details of standard database contents: a) Engineering terms, Japanese – English: 3,000 pairs b) Material symbol:3,000 types(JIS/AST w/ density) c) Array of thermal expansion, stress allowance for temperature and Young's modulus d) 560 types of gasket/packing from 7 manufacturers e) Standard code:400 codes of JIS,JPI,ISO,ASME,API f) PMS: 300 spec classes in total (5K - 210K, 125# - 2500#, ISO PN10 - PN50) g) Valve specification standard: 800 types (5K - 210K, 125# - 2500#, ISO PN10 - PN50 for each) h) Piping part shapes/dimensions: 1,000 types of shape i) Insulation class/each thickness value array: 524 types
Main setting functions ; 1)Plant attribution 2)Drawing management 3)The piping materials standard:PMS 4)Valve specification 5)Registration of shapes/ dimension of piping compoments 6)Insulation specification, 7)fluid attribution 8)JOB division 9)Participant attribution 10)Plant site attribution 11)Piping branching table 12)Equipment specification
Plant Attribute & Standard Reference D. B. Control System
PMS editwindow
Siteinformation
Plantattribution
All Plants infomation list
Participant attribute
P&ID設計システム
Well-improved system with proven experience in the plants of various industries over past 20 years.
1)Generates the drawing as well as engineering logic diagram,line-pipe run index,and automatic calculations of each part.
2)Includes the pre-installed various symbols and line-types for P&ID,supporting input in half
or less the time that is needed for general 3D system 3)Shares the plant attribution and piping standard database (EYESPEC) with EYEPIPE for
consistency check against EYEPIPE 3D models
5
EYEPID®
Long landscape P&ID window
P&ID drawing
Registering window of specific equipment
P&ID Design System
(Special)Equipment, Piping, Valves, Piping accessory,Instrument,
Instrument symbol, Signal Lines, Optional mark, Character
Ax standard size, 2 or 4 pages in landscape format, pages
divided from long landscape format
Examples of consistency error
between P&ID and 3D piping
Pre-installed
data
Drawing function
Intelligence function
Piping Start
Piping End
Start connectto equip
Start Connect
Piping STG size is disagree
Piping STG Spec-Class is disagree
Piping end size is disagree
Piping end Spec-Class is disagree
Start point of 3D piping connects to equipment
or other piping,but not in P&ID’s
Start point of 3D piping connects tosomething other than equipment,but P&ID'sconnects to equipment.
The number of Equipment connecting to start
point does not match to others.
CodePoint エラー内容
52
53
62
63
100
110
111
Piping Line type (general, full, semi-jacket, duct, etc.)
Instrument signal line type (JIS, ISA)
Equipments Symbol
Standard valves’symbol
Piping accessory symbol
Instrument Symbol
Graphic by object, free drawing
Copy, Mirror Reversed Copy
Move, deletion, grouping
Copy between drawings, or jobs
Longitudinal drawing graphic
2 hierarchy parametric symbol
a) Automatic linking with common EYECAD piping material,
valves standard and equipment spec
b) Piping line trans-graphic control by off-sheet connector
c) Flexible job control allowing each symbol/line to be
classified
d) View switching between English and Japanese, pipe nominal
A/B on the same drawing
e) Display of valve, flange, or welding mark based on PMS
f) Auto correction of line mark or spec of valve and accessory
synchronized with piping line attribution change
g) Auto numbering/saving of line numbers and data integration
between jobs
h) Various listings allowing for range/job control
i) 3D data consistency check for piping size, class, flow
symbols, flow symbol attribution
j) Data integration between projects
15種
20種
110種
20種
100種
120種
DWGsize
Symbol&
Lines
Structure
3次元プラント配管設計システム
1) Flexible operation with modern GUI and functions coloring objects individually EYEPIPE can
instantly switch a display mode between shading 3D and wire frame by selected object,even
in the same object type.Simple and outstanding operability realizes to display and modify
window,its attribution on one window,avoiding windows scattered over the screen.
2) Various object types and standard pre-installed EYECAD contains objects and standard ranging
from column No.,floors,handrails,stairs,frames,structures,equipment,piping,ducts,piping support
to database of lots of standard symbols,data,or dimensions,required for plant constitution.These
objects have their own attribution and show data-centric fundamental structure.
3) Easy implementation of contiguous/clash check EYECAD promptly performs contiguous check between
welding points of piping components, and clash check between provided objects in specific area,
and then displays those results regarding unconformity or clash part through just one click.
4) Instant display of 3D assembly drawing based on a quick hidden line process The attribution string
is automatically displayed on the drawing line of each object.Selecting and dragging-out the provided
area indicates the dimension.Plane view,solid view and perspective view can be easily drawn for it
represents piping in indicated size or less by single line,piping in more than indicated size by
double line.
5) Automatic-generation of piping spool drawing/interactive-output of the drawing with detailed
material data EYECAD allows it to be transferred to construction division.Entire isometric
drawing specific to any piping system is available for flashing test drawing.
6) Detailed BOM list in applicable output format to order Name,type,material,quantity and weight of
the following components are calculated;linelist,pipe,piping component,valve,accessory,instrument,
bolt/nut gasket,insulation,cladding and structure.Indicating the amount of construction work,
output format includes inch-meter,entire length,area,average size,and quantity by each material
group,and Dia-Inch by each connection type.
6
EYEPIPE®
Plant model edit window
Piping assembly drawing3-sided DWG of equipment
Loading of pointcloud data
Import of surface data
3D assembly DWG operation window
Piping Spool Drawing/interactive operation
3D Plant Piping Design CAD System
Piping Spool Drawing
Updates in V6.90 1) Convert the point cloud data to surface data 2) Convert to primitive shape such as cylinder solid or the cuboid (cube) 3) Convert to mode data such as piping or equipment (scheduled)
配管サポートシステム
1) The piping support drawing and bill of material are automatically produced along with pipe section and line-mark by configuring piping support into piping model based on EYEPIPE.The assembly and spool drawings include the support/fastener marks,and tag with data of position and dimension.
2) The following attribution of a piping support model can be configured; a) Tag No: unique symbol (area symbol) for support, serial letters indicating 3 elements b) Comments c) JOB group d) Support class: each material letter of section steel and fastener 3) The fundamental specification of support is classified into the following 4 items; a) Section steel: component required for a main support unit (angle, channel, H, etc.) b) Attachment: component required to fix main support unit (Base plate, etc.) c) Fixing part: component required to fix main support unit (foundation bolt, etc.) d) Fastener: parts required to fix pipes (U-bolt, shoe, etc.) 4) Shaping a support requires to indicate one pair or more out of 40 kinds of support styles
such as gate and T-shape, and set attributions of tag,piping to be connected, each dimension of component a) – d),position,specification,and the connection method.ASUP (BS:text file) and JSUPNO.csv can be also supported to add and modify at once the attributions of main support unit or contents of title block in the drawing.
5) The resulting support drawing is automatically displayed in A4 document along with the
detailed drawing of hole of fixing bolts,position of street No,each dimension,and contents of title/material block.
6) The piping assembly drawing displays the actual position of support as a symbol or solid shape,
including the data of position/dimension,tag and various fastener symbols by its feature.The piping spool drawing also indicates the fastener symbols as well as installation dimension and tag.
7) Bill of material is based on 4 kinds of specification described above. This table can be
exported as a text format,l_3dsm,and then available to sort it out with Excel,etc.
7
EYESUPT®
Piping Support System
Piping support L/O Part(EYEPIPE)
DWG、B/M output setting windowPiping support: operation window
Piping support drawing (automatic)
Spool DWG part with Mark
Piping support B/M
プラント設計 レビューコミュニケーションシステム
All EYEVIEW-LT functions are involved in EYEPIPE modeling function.However this model data is
possible that retrieval by EYEVIEW-LT,The file saving of plant model added and reviced data is
impossible.
EYEVIEW-LT ensures simple communications such as design review,change commands,a check for the
plant model created by EYECAD.
Main features are as follows;
1) EYEVIEW-LT can perform an attribute check and viewing the inside of the plant model.
2) This system can add and correct tag papers (direction comments) in a plant model.
3) For the check of the matching after model change,users can change the model on the spot by
operation completely same as a model creation system.However,the form aftermodel change is
not saved.(Of course, tag papers and the scale box are saved.)
4) This system can save and retrieve the view screens.
5) This system can edit and save the color.
8
EYEVIEW-LT
By attaching marks and names with optionalparameters,EYEVIEW-LT can arrange the "scale box".Moreover,this is applicable to the layout plan of a model unit, position change directions and space measurement of area.
Scale Box function
Displayed the attribute by ajusting cursor on the object.
Tool-tip function
Displayed by DWG dimension form
Measurement function (Planned on V6.90)
This is a Tag comment putting function in plant model.This can also perform view movements up to the place where userschoose a tag paper from a list.
Tag function
Ductangle Scale Cylindrical Scale
ビュー移動
①メニューバー
セクション名
⑦セクションウィンドウ (モデリングビュー)
⑦セクションウィンドウ (パースビュー)
②ツールバー
③プロパティーウィンドウ
④ラベルウィンドウ
⑤一覧ウィンドウ⑥セクションリストウィンドウ
⑦セクションウィンドウ (モデリングビュー)
⑨付箋紙
⑧ツールチップ
Plant Design Review & Communication System
Space betw pipe sideSpace betw pipe center
The screen composition of EYEVIEW-LT issame as the model creation of EYECADcompletely.
Screen Composition
材料, 工事量明細出力、編集、併合、ソート、区分システム
1) EYELIST creates B/M, B/Q calculation and text files which can be used for procurement with
EYEPID and EYEPIPE.It outputs CSV styled B/M and B/Q by each parts and pipe run with
belonging line marks and plant XYZ position, we can verify various management.
2) By choosing required item on Excel® description,users can make unification,sorting and change
of the contents, and users can also set up a style freely and output it.
3) Furthermore,this system also has the sorting function according to plant division blocks,
manufacturers,etc.
4) EYELIST has EYELIST-1 and EYELIST-2 EYELIST-1 performs calculation of attribution data.It
is useful for a necessary procurement process;line-list,valves,accessories,instruments,piping
parts,insulation,
9
EYELIST®
BOM Calculation, Sort and Edit Screenpainting, B/Q and pipe cut plan.
Detail B/M,B/Q O/P,Edit,Merging,Sorting and Distribution System
Pipe-run index(l_3dll) : EYELIST-1
Piping piece B/Q(l_3dsppn) : EYELIST-1
つづき
10
5)EYELIST-2 is the information management system for the fabrication control and inspection.
Piping welding information w/ both side material SPEC list(l_3dwibm): EYELIST-2 Welding point front Rear info.
PMS defined component B/M List: : l_3dpmbq : EYELIST-1
Test Loop spool drawing : EYELIST-2
The paint & insulation classification B/Q is possible by this each insulation INFO.
Automatically O/P of the commodity code is possible by setting commodity code toeach line cell in Job PMS packing mode list:l_jpms_ctlg_pack.xls
配管圧力損失計算システム
1) By specifying a fluid-serial No. of the header piping model created by EYEPIPE,many items
required for each point information on the piping route which leads to the piping and
calculation between the point areautomatically output according to each piping line on
Excel® Sheet.
2) All of calculation after this and a case studies are performed by the Excel® side.
3) Fluid density and viscosity are calculated by the value of water as a default,and users can
change andre-calculate them.
4) Flux is calculated by the value set up in the model of EYEPIPE. When not set up,it is calculated
with a default value.
5) Pipe Run-Length of each part is set by Pipe Run-Length of each piping part with reference
to the multiple of the diameter of relevance defined by another table which is AFLENR
(Excel® Sheet Name).Moreover,an additional change is possible for this table contents by
users.
6) Length of Point to Point is set for straight length of each center points.
7) Each sum total of Straight Length and Equivalent Length and these two totals are calculated
as friction pressure loss.Differential pressure in position of start & end of piping is
also calculated separately,and is calculated as sum total pressure.
8) The formula of Fanning is contained by Macro of Excel® for calculation of friction pressure
loss,and it is also possible to change this Macro by users.
11
EYEPRD
Piping Line Pressure Loss Caluculation Sheet e.g.
C
C
BEND
BEND
BEND
SCC
SCE
BT
CBT
CTB
B45Y
B4FY
90°Elbow
45°Elbow
Pipe bend
Pipe bend
Pipe bend
Con Reducer
Ecc Reducer
Tee branch
Tee branch curve
Branch Tee curve
45°Wye branch
45°Wye fowrad branch
3230
3190
3150
3150
3150
3096
3098
3320
3320
3320
3306
3306
1.5
1.5
0.1
0.1
0.1
12
6
60
15
30
12
19
20
60
80
40
30
90
45
90
45
60
0
0
0
90
90
90
90
Radius
/
InDIA
Angle
Deg
EQUIV
LENG
/InDIA
MATEL
item
Code
Func
tion
Mark
Material name
or
Function name
GATE
GLOB
CHEC
CHEC
NEED
BALL
BALL
DIAP
BELL
BUTT
Y.TY
PIST
VACU
Gate
Globe
Check
Check
Needle
Ball
Ball
Diaphragm
Bellow
Butterfly
Wye type
Piston
Vacuum
2101
2102
2103
2103
2104
2105
2105
2106
2107
2108
2109
2110
2111
SWING
PISTON
FULL
REDU
7
300
83
600
300
1
7
100
300
300
60
600
300
0
0
0
0
0
0
0
0
0
0
0
0
0
Throat
Type
Angle
Deg
EQUIV
LENG
/InDIA
MATEL
item
Code
Func
tion
Mark
Material name
or
Function name
Piping Pressure Loss Equivalent Length Table : AFLENR
Valves samplePiping fittings sample
Pipe Pressure Loss Calculation System
配管応力解析システムへの配管、サポートデータのコンバートシステム
EYEPFA convert the piping route,the attribute of EYEPIPE and EYESUPT fastener data to the piping stress analysis system widely used for stress analysis.This function puts into automatic text files to the input form of the target piping stress analysis system with the each place support information which input by EYESUPT.
1) As a standard reference data,material attributions which is required for the piping shape analysis.
2) The allowable stress of the pipe at a given temperature,Young's modulus, specific gravity, and the value of thermal expansion are formed into standard data, and values required for a setup of temperature and pressure are to be automatically chosen and save into text file.
3)Special and complicated piping like a jacket piping is also convertible.
12
EYEPFA®
Converted Piping Component Information
Title & HeaderControl DataPipe segmentPipe commentPessure DataTempereture DataStraight pipeTangential cross pointReducer factorExpansion factorFlange connection factorUnder ground pipeTee connection
1 2
345678910111213
Fixed pointV-Stop suppport (virtical DIR restraint) Line stop support(Axial DIR restraint) GuidConstant hunger
1 2
3
45
As EYEPIPE Model As EYESUPT data
Piping fastener samples by EYESUPT
Piping-Support model Convert Setting Dialog
Pipe,Support Data Convert System to the Stress Analysis System
Support-fastener mark,position & dimensionon piping spool DWG by EYEPIPE
DWG sample of piping network for stress
analisys by EYEPIPE
Support-fastener mark,position & dimensionon piping support L/O DWG by EYEPIPE
鋼構造計算システムへの構造データコンバートシステム
1) EYESTEEL is a convert system from EYEPIPE struucture model to a structual analysis system.
2) The structural analysis system supports "STAN®" series now.
3) Marks can be optionally set to each frame components.Structure information is converted
with the marks, component specification and connection information.
EYESTEEL contains the following
attribute databases.
This can be converted to a steel
structure calculation
system with these information.
4) The structure model editing,DWG ooutput and B/Q function
are included in EYEPIPE system.
5) Standard format such as CIMsteel etc.is due to be carried out for other structural analysis
or a structure-related system from now on.
13
EYESTEEL®
Structure Member BOM
Equal Angles Total Channels Total H-Shapes Total RC Total All Total
L-75x75x6x6 L-50x50x6x6 [-150x75x6.5 H-300x150x6.5 H-250x250x9 RC-500x500
SS400SS400
SS400
SS400SS400
RC
4.5420.2424.7811.7911.7949.3715.3
64.671.21.2
102.44
6.854.43
18.6
36.772.4
0
31.189.67
120.77219.3219.3
1811.881107.722919.6
00
3259.67
10161009
4004
50215018
0
Size
a58
Material
a10
T-length
m
f10.2
Weight
kg/m
f6.2
T-Weight
kg
f10.2
Sec.TP
Code
i5
Comment
a14
Name
a22
Column-Beam Package Input Dialog(EYEPIPE)
Structure Model Input Screen(EYEPIPE)
Structure Data Convert for the Stress Calculate System
Structure & equipment L/O(EYEPIPE)
STRUCT & EQUIP L/O Side-view w/ membermark(EYEPIPE)
Nodal Point
Boundary Condition
Material Property
Cross Section Performance
Member
Data
Mark
Edge Condition
Material Property
14
配管製作検査図システム
Piping FabricationInspection DWG System
その他のオプション
Other Option Softwere
1) This is automatically output
from the piping model created by
EYEPIPE.
2) This editing information is
refered of a piping spool.
3) The resolved piping piece unit
is outputed from assigned spool
drawing on A4 paper
automatically
1) This is automatically output
from the piping model created by
EYEPIPE.
2) Up to 10 pieces in the common
shape of piping model can be
automatically displayed on the
A4 drawing,along with the
dimension table of each piece
and section.
EYEPIECEPiping Piece DWG SystemEYEPIECE 配管ピース図システム
The No.3 & Order 2nd-5th cell is puted by manual
1 Auto billing from system B/Q Text File
2 Auto billing by spare ratio X NET of this system
3 Manual input this No. for spare
4 Total for purchase
No. Content
5 Auto billing by 1st purchase ratio X NET of this system
6 Manual input after 2nd
7 Previous No.of NET
8 Previous NET-Present NET :+:green、-:pink
9 No.of unorderd
No. Content
EYELIST-Option 配管材料発注管理システム
EYELIST−OptionPiping material PO management system
EYECADは、日本インターグラフ株式会社の登録商標です。EYECAD is a copyright of INTERGRAPH Japan K.K.
横浜駅
●Queen's Square
Queen's Tower C 13F
JR・市営地下鉄線JR Line・Municipal Subway
Sakuragi-cho Sta.至湘南台to Shonandai
至大船to Ofuna
国際大通り
横浜美術館●
みなとみらい大通り
●パシフィコ横浜
臨海パーク
●国際会議場
みなとみらい線Minatomirai line(東急東横線直通)
新高島駅Shin-Takasima Sta.
馬車道駅Bashamiti Sta.
●よこはま コスモワールド
Minatomirai Sta.みなとみらい駅
けやき通り●横浜ランドマークタワー
桜木町駅首都高速(横羽線)みなとみらいランプ
↑↓ ↑↓
http://www.intergraph.com/global/jp/ppm/EYECADhome.aspx
13F Queen's Tower, 2-3-5 Minato Mirai
Nishi-ku, Yokohama 220-6213
P +81.(0)45.640.1191 F +81.(0)45.683.6160
Intergraph Japan K.K.Process, Power & Marine