our technical sales representatives provide expert advice ... · • trouble shooting •...

www.bobcatoftherockies.comwww.bobcatoftherockies.com

Cheyenne, WY • 1608 E. Allison Rd. • 307.635.1978Colorado Springs • 910 E. Cheyenne Rd. • 719.219.2940

Commerce City • 7000 E. 56th Ave. • 303.288.6603Golden • 15680 W. 6th Ave. • 303.216.1402

Grand Junction • 3184 Hall Ave. • 970.434.0647Parker • 18562 Pony Express Dr. • 720.851.9484

Pueblo West • 579 E. Enterprise Dr. • 719.647.2317Windsor • 1015 Champion Dr. • 970.356.8800

A Division of Berry Companies Inc. Limited to In-Stock Quantities 2019

Technical Support & Training

Our Technical Sales Representatives provide expert advice and consultation to Professional

Contractors which includes the following:

We’re always happy to help Give us a Call!

www.bobcatoftherockies.com2

• Product Selection • Trouble Shooting • Professional Training • Equipment Expertise • Outside Sales/Field Experience

Cary Katalin910 E Cheyenne RdColorado Springs

719-219-2940719-493-8062 - cell

[email protected]

Mark Ernst7000 E 56th AveCommerce City303-288-6603

303-356-7362 - [email protected]

Tim Smith15680 W 6th Ave

Golden303-216-1402


Wayne Suhr18562 Pony Express Dr

Parker720-851-9484


Jake Waters1015 Champion Dr

Windsor970-356-8800

970-534-0100- [email protected]

COMPACTION

GRINDERS & SCARIFIERS

www.bobcatoftherockies.com 3

Rental Equipment Subject to Availability—Open Accounts are required for Rentals

Day Week 4 WksRammer $75 $225 $675Plate Tamper $75 $225 $675

Day Week 4 Wks $125 $375 $1125

Day Week 4 Wks8’ Ride on $305 $915 $2745

Day Week 4 Wks36”/46” Walk behind $110 $330 $990

Day Week 4 WksSC150 Gas $65 $195 $585X4000 14” Saw $140 $420 $1260

Day Week 4 WksFS400 $75 $225 $675

Day Week 4 Wks14” Cut-off Saw $65 $195 $585

Day Week 4 WksScarifierCPM8 with drum $245 $735 $2205CPM10 with drum $275 $825 $2475

GrinderPG280 (110V) $75 $225 $675PG450 (220V or 110V) $125 $375 $1125

Vacuum $100 $300 $900

Day Week 4 Wks185 cfm Air Compressor $120 60/90 lb. Breaker $40 $120 $360Points, Chisels, Bits (ea.) $5 $15 $453/4” x 50 ft Hose (ea.) $10 $30 $90Makita Electric Breaker $75 $225 $675

FLAT SAW - CONCRETE & ASPHALT

Day Week 4 WksFS3500 35HP $160 $480 $1440FS5000D 55HP $250 $750 $2250

EARLY ENTRY - CONCRETE SAW

ST2037Submersible Pump1 HP Honda Engine115 Volt73 GPM37’ Head, 31 lbs.$ 295

QP2TH Trash Pump2” x 2”5 HP Honda Engine211 GPM $ 1,095

QP3TH Trash Pump 3” x 3”8 HP Honda Engine396 GPM$ 1,395

www.bobcatoftherockies.com prices subject to change4

MTX60Honda GX100141 lbs. 13” x 10”55.8 FT/MIN.

$ 2,495

MVC82VH Weight- 181 lbs.Plate 17.7x22 in.$ 1,595

Without water tank$ 1,495

MC94SH8Concrete Mixer9 CU/FT Steel Drum8 HP Honda Engine$ 3,250

WM90SH8 Mortar Mixer9 CU/FT8 HP Honda Engine2” Ball Hitch$ 2,895

GA36HR3600 Watt 8 HP Honda Engine$ 2,095

GA6HRS 6000 Watt11 HP Honda EngineElectric Start (battery not included)$ 2,495

GA6HR 6000 Watt11 HP Honda Engine$ 2,295

EquipmentGeneral Jobsite Equipment

MTX70Honda GX100165 lbs. 13” x 11”55.8 FT/MIN.$ 3,195

MVC88VTH Weight- 229 lbs.Plate 19.7x 20.7 in.$ 1,995

Without water tank$ 1,895

Water Trailer

This Multiquip WT5C is an item that brings versatil-ity to many jobs from dust control, emergency fire fighting response, construction, and equipment wash down. This unit features a DOT approved double axle trailer, a high-flow MQ QP2H centrifugal pump, flexi-ble suction/discharge manifold system, and a rugged 500 gal polypropylene water tank.

Unit Specifications•Water Tank 525 Gal. Polyethylene•Trailer DOT certified, dual axle, 3500 LB.•Power Source HONDA GX120 recoil start•Pump Multiquip QP2H 2 in. Centrifugal•Flow / Head 158 GPM / 115 Ft.

$6,750

Plate CompactorsRammers

Mixers Generators

Pumps

Discharge and Suction Hoses Available.

J36H55 36” 5 1/2 HP Honda Quick Pitch Handle150 lbs.$ 2,450

B46H90 46”, 9 HP HondaQuick Pitch Handle263 lbs.$ 2,895

35 HPVanguard EngineTwin Pitch Control1083 lbs$19,650

37 HP Kohler Gas Engine5-Blade Rotors Torque converter

Clutch Super HD Gearboxes4 Lights Retardant Spray

System 165 RPM1,052 lbs.

$19,225

Allen Gas Powered Magic Screed Power HeadHD7070 Honda 35CC Gas EngineFull Adjustable HandlesAnti-Vibration system

$1,850

Magic Screed Razorback Truss Screed WS500H ScreeDemon

www.bobcatoftherockies.com prices subject to change

Concrete Finishing

J3036H55The first edging trowel to feature an adjustable diameter guard ring30”- 36”, 4.8 HP HondaQuick Pitch Handle171 lbs.$2,595

HHNG5 mechanical ride-on power trowel is powered by a 35 HP Briggs and Stratton Vanguard Air Cooled V-Twin engine that includes several new features that raise the performance bar.

HHNG535 HP Briggs & Stratton V-Twin Big Block Non-over-lapping,48”,twin five-blade rotors

•Minimizes variability in vibration•Clamp system makes assembly & disas-sembly of the ScreeDemon fast and easy - no holes or hardware•Allows for offsetting of screed for working under protrusions•Can be attached or removed from screed in seconds for cleaning/transport

Honda GX35 gas motor1.5 HPDual Level Anti-vibration$1,650


The Allen® Razorback® Truss Screed is the contractor’s preferred brand when high tolerance FL Numbers are specified on concrete floors and pavements. For more than 40 years, Allen Truss Screeds have set the industry’s standard for precision levelness, rigidity and durability.

Call for pricing

Walk Behind Trowels Ride-on Trowels

MSP445 Super Pro - featuring your choice of joystick power or manual lever steering and the power of gas-oline engines, the Mechanical-Drive Super Pro (MSP) Series is our most popular series of riders with larger contractors. These riding trowels are powerful and responsive due their weight-to-horsepower ratio.

Website: www.curbroller.comPhone: 785-467-3132

Curb RollerManufacturing

At Curb Roller Mfg. we are proud to be the world leader in shaped concrete roller screeds,producing quality products for everyday concrete work. Our portable, ergonomic machines not

only make it easy to shape standard curb, gutter and sidewalks, but also flume, swale, v-gutter and other unique shapes. The award-winning Curb Roller and Hydra-Screed both have the

ability to easily switch out profiles, allowing you to complete a wider variety of jobs while increasing your bottom line.

Both the Curb Roller and Hydra-Screed give contractors the ability to do a broader scope of work without having to invest in large, expensive equipment. They easily fit in the bed of a pickup, meaning you can take them anywhere the job calls for. Just hook them up to your

hydraulic power source (i.e. skid loader, mini excavator, tractor, etc.) and you’ll be ready to roll. Don't want to rely on hydraulics? Say goodbye to hoses, cords and fumes with the world's first battery powered roller screed! The Batt Screed utilizes a rechargeable 60-volt lithium-ion

battery for impressive power and run time.

Give our products a try today and let us show you why we stand out from the competition!

CURB ROLLERMANUFACTURING

www.bobcatoftherockies.com10 www.bobcatoftherockies.com6

Website: www.curbroller.comPhone: 785-467-3132

Curb RollerManufacturing

At Curb Roller Mfg. we are proud to be the world leader in shaped concrete roller screeds,producing quality products for everyday concrete work. Our portable, ergonomic machines not

only make it easy to shape standard curb, gutter and sidewalks, but also flume, swale, v-gutter and other unique shapes. The award-winning Curb Roller and Hydra-Screed both have the

ability to easily switch out profiles, allowing you to complete a wider variety of jobs while increasing your bottom line.

Both the Curb Roller and Hydra-Screed give contractors the ability to do a broader scope of work without having to invest in large, expensive equipment. They easily fit in the bed of a pickup, meaning you can take them anywhere the job calls for. Just hook them up to your

hydraulic power source (i.e. skid loader, mini excavator, tractor, etc.) and you’ll be ready to roll. Don't want to rely on hydraulics? Say goodbye to hoses, cords and fumes with the world's first battery powered roller screed! The Batt Screed utilizes a rechargeable 60-volt lithium-ion

battery for impressive power and run time.

Give our products a try today and let us show you why we stand out from the competition!

CURB ROLLERMANUFACTURING

www.bobcatoftherockies.com 11www.bobcatoftherockies.com 7

COLORADO'S #1 SOFF-CUT® DEALERSoff-Cut® XL Blades

Soff-Cut® Vari-Cut™ & FLX Blades

High Speed Diamond Blades

BULK KITS AVAILABLE

BULK KITS AVAILABLE

PRICE RANGE: $30-$350

HUSQVARNA DIAMOND BLADES


8 www.bobcatoftherockies.com Prices subject to change

COLORADO'S #1 SOFF-CUT® DEALERSoff-Cut® XL Blades

Soff-Cut® Vari-Cut™ & FLX Blades

High Speed Diamond Blades

BULK KITS AVAILABLE

BULK KITS AVAILABLE

PRICE RANGE: $30-$350

HUSQVARNA DIAMOND BLADES

PG 280 PG 400 PG 450$3,199.00

Soff-Cut® 150 Soff-Cut® 2000 Soff-Cut® 4000 Soff-Cut® 2500 Soff-Cut® 4200

S 26 S 36 S 36 P$5,399.00 $5,499.00 $2,295.00 $4,899.00 $8,499.00

$2,599.00 CALL FOR PRICING CALL FOR PRICING CALL FOR PRICING CALL FOR PRICING

K 770 K 970 DMS 240FS 309 FS 400$1,895.00$1,699.00 $1,995.00$950.00 $1,325.00

COLORADO'S #1 SOFF-CUT® DEALER

SOFF-CUT® Specs Net Price

Soff-Cut® 150 4.3 HP | 6" Max Blade Dia. | 102 lbs. $2,599.00

Soff-Cut® 2000 9 HP | 10" Max Blade Dia. | 317 lbs. Call for Pricing

Soff-Cut® 4000 20 HP | 13.5" Max Blade Dia. | 420 lbs. Call for Pricing

Soff-Cut® 2500 11 HP | 10" Max Blade Dia. | 347 lbs. Call for Pricing

Soff-Cut® 4200 22 HP | 13.5" Max Blade Dia. | 488 lbs. Call for Pricing

Power Cutters, Flat Saws, Core Drills Specs Net Price

K 770 5 HP | 14" Max Blade Dia. | 21.2 lbs. $950.00

K 970 6.5 HP | 16" Max Blade Dia. | 24.3 lbs. $1,325.00

FS 309 8.5 HP | 14" Max Blade Dia. | 117 lbs. $1,699.00

FS 400 11 HP | 20" Max Blade Dia. | 306 lbs. $1,995.00

DMS 240 2.9 HP | 10" Max Bit Dia. | 51 lbs. $1,895.00

Surface Prep and Dust & Slurry Specs Net Price

PG 280 Grinder/Edger | 11" Grinding Width | 1-phase $3,199.00

PG 400 230V Grinder | 16" Grinding Width | 1 or 3 phase $5,399.00

PG 450 230V Grinder | 18" Grinding Width | 1 or 3 phase $5,499.00

S 26 Vac | 258 CFM | 100" Water Lift $2,295.00

S 36 50A Vac | 285 or 353 CFM | 80" or 100" Water Lift $4,899.00

S 36 Propane Vac | 285 CFM | 100" Water Lift Call for Pricing

HUSQVARNA SOFF-CUT®

POWER CUTTERS FLAT SAWS CORE DRILLS

SURFACE PREP DUST & SLURRY


9www.bobcatoftherockies.com

Call for pricing


AT14S Power Buggy WBH-16

• Quickly dump material, a 80° dump angle assures the tub is emptied on your first approach• Reduce concrete splatter during transport with an integrated tub splash guard• Smooth operation under all conditions with a fully hydrostatic drive system• Actuate dumping mechanism using either a hand lever or a foot pedal

• Equipped with 90-degree dump angle• 180o pivoting dump means you can place your material exactly where you need it• 14 cubic foot steel bucket ensures long lifespan• Four large rings for use with lifting bridles• Rubber tracks for extra load capacity and traction• Engine cover fully encloses the engine components

Call for pricing

Zero emissions - easy charging!• TuffTruk Model TB11E features a rechargeable, zero emissions, high torque battery drive and provides solid eight hour run time under full load.

• Long-lasting charge lasts two to three days under typical conditions•Rechargeable battery model has regenerative braking system to help slow down when stopping; this generates power back to the battery to increase efficiency and range.•Quiet operation produces very low noise - 69dBa using rechargeable battery.

A compact workhorse• True 4-wheel drive and wide flotation tires proved traction on muddy or rough terrain, with excellent climbing ability.• Excellent manoeuvrability with 400 articulation angle and 58-inh turning radius.

•Rugged steel tub carries up to 10.6 ft3 of material or debris and passes through 36-inch wide openings. Optional 7 ft3 tub allows access through 32-inch openings

What is your reputation riding on?If your equipment doesn’t hold up, neither will your reputation. That’s why professional contractors trust industry-leading Multiquip Whiteman® Trowels more than any other brand. Find out why you should too.

© Multiquip Inc.Like us on Facebook

www.multiquip.com



Accessories

Construction LasersZone40H

HD Electronic Self-LevelingRange 3000’ diaAccuracy 1/16” at 100’Includes ZRP105 rod sensor & carrying case$1,195

Zone20HElectronic Self-LevelingRange 3000’ diaAccuracy 1/16” at 100’Includes ZRP105 rod sensor & carrying case$895

HD Electronic Self-Leveling15% Dual GradeRange 3000’ diaAccuracy 1/16” at 100’Includes ZRP105 rod sensor & carrying case$1,895

Zone60DG

We have all of your accessories for your construction lasers• Recievers• Batteries• Grade Rods• Tripods

CUTQUICK®

Pressure Washers

4000 PSI4.0 GPM13 HP Honda Engine50’ Hose7 year limited pump warranty149 lbs.$1,295

HD4.0/40G - MakoG3200

3200 PSI2.5 GPMHonda Engine25’ Hose76 lbs.$495

POWER : 15 AMP motor generates 135 CFM of suction power to take on the most challenging applications

INNOVATION : Automatic Filter Cleaning Sys-tem with blow-back feature for longer filter

PERFORMANCE : Motor chamber constructed of sound-absorbing materials for quiet opera-tion; only 59 dBA

CONVENIENCE : Onboard tool-activated outlet starts and stops vacuum with power tool usage

INCLUDES : Main flat Nano filters (pair), fleece Nano filter bag, disposal bag, 1-3/8” x 16’ anti-static hose, crevice nozzle, cuff adapter, 7” Angle Grinder, 7” dust shroud

Price $830 - for everything shown!

VC4710X1 12 Gallon Xtract Vac® Wet/Dry Dust Extractor/Vacuum and 7” Angle Grinder

Featured Product

BLOWOUT PRICES!

CHAIN SAWSMS362C-M Flush

59.0 cc4.6 bhp13.0 lbs.18” bar (3/8 chain)List: $759.95Sale: $729.95

MS261C-M

50.2 cc3.9 bhp11.6 lbs.16” bar (.325 chain)List: $569.95Sale: $529.95

MS201T -CMPro Tree Service

35.2 cc2.41 bhp8.16 lbs.14” bar (3/8P chain)List: $689.95Sale: $639.95

MS441C-M

70.7 cc5.6 bhp14.6 lbs.20” bar (3/8 chain)List: $1,009.95Sale: $939.95

TRIMMERSFS94K

28.1 cc1.2 bhp10.1 lbs.List: $349.95Sale: $324.95

FS131


FS240


FS111R


CUTQUICK®

BLOWERS Edger /Hedge Trimmer BR700BG86C-E

27.2 cc154 mph459 cfmList: $269.95Sale: $249.95

HL94KH (0°- 145 °)

24.1 cc1.2 bhp12.8 lbs.List: $499.95 Sale: $459.95

FC111


TS500i-14”

72.2 cc5.2 bhp22.5 lbs.List: $1,279.95Sale: $1,231.95

TS700-14”

98.5 cc6.7 bhp25.6 lbs.List: $1,379.95Sale: $1,329.95

TS800-16”

98.5 cc6.7 bhp28.0 lbs.List: $1,479.95Sale: 1,429.95

Outdoor Power Equipment


64.8 cc197 mph912 cfmList: $549.95Sale: $508.95

TS420-14”

67.7 cc4.4bhp21.2 lbs.List: $1,019.95Sale: $979.95


Compressors

•Sleek design•2 Year Warranty•Variable speed throttle control•Two moving parts•No in-line oiler required for under 50’ of hose

MPB90A - 90 lb breaker $1,050MPB60A - 60 lb breaker $995MBT-6 - Pole Tamper (round butt) $1,095MDT22 - Demolition Tool 7/8” $650MCH4 - Chipping Hammer (spring retainer) $525MCH4 - Chipping Hammer (quick change) $525

Portable Compressor 185 cfm

Rebar ToolsPortable Rebar Cutter DC20WH

The DC-20WH portable heavy-duty rebar cutter will safely, efficiently, and cleanly cut rebar up to #6 (3/4”) diameter grade 60.

• Cold cutting shear• No sparks or flame• Fastest & safest• Very economical

$1,395

Cutting Edge Saw BNCE-20

This compact and lightweight tool has a 3-position removable side handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased manoeuvrability in tight areas

$297

• Cleanly cuts material• Designed to minimize sparks• Cuts a variety of materials

Automatic Rebar Tier BNT-40

This portable electric rebar tying tool is lightweight and has a compact, easy to hold grip. The tool is well balanced and is designed to tie rebars as fast as you can pull the trigger.

$1,695

• Kit comes with 2 lithium ion batteries• Can tie over 2000 ties on single charge

Power Tools

7” Angle GrinderThe Makita 7 in. grinder has a soft start feature for smooth start-ups. Its rotatable rear handle can be positioned for multiple applications. It includes a low vibration rear handle with soft grip for more com-fort and control

• 15 AMP motor• 8000 RPM• ”Tool-less” wheel guard$219

4.5” Angle Grinder w/caseMakita’s 4-1/2” Cut-Off/Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance

• 7.5 AMP Motor• 11,000 RPM• Rotatable gear housing$109

70 lb Breaker w/cartTough on concrete, not on you. Makita’s hard-hitting 70 lb. Breaker Hammer is equipped with Anti-Vibration Technology (AVT), an exclusive counterbalance system that reduces vibration.

• 15 AMP motor• 46.5 ft.lbs of impact energy• Accepts 1-1/8” Hex bits$1,850

Model # MDIS185SS14F

• 49HP Tier IV Isuzu diesel engine• State-of -the-art LED digital control panel • Compressor temperature • Engine temperature • Engine speed •Complete engine diagnostic tool• DOT approved tail lamps, stop lamps and turn signals• Sound attenuated, weather resistant, lockable steel housing

Call for pricing

www.bobcatoftherockies.com prices subject to change www.bobcatoftherockies.com 15

LESS LABOR, MORE PROFIT

COMPOSITE REBAR

| LIGHTWEIGHT| HIGH STRENGTH| RUST FREE

(906) 934-2661 | GATORBAR.COM


Cure & Seal

Solvent Based Cure & Seals

• J23UV - 30% solids • J20UV - 25% solids

• Cureseal 1315

Water Based Cure & Seals

* J18 - water based acrylic

* Repel Cure™

Cure & Seal is available in both solvent based and water based formulas. It can be used the same day of your pour. We have both penetrating and topical ver-

sions in stock now, our knowledgeable sales staff will be able to help you pick the best product for your job.

Protective SealersProtective Sealers are available in both solvent based and water based formulas and

should not be applied until the concrete is fully cured (typically 28 days) It is also applied for maintaining your concrete every year or as needed depending on

weather and traffic to the concrete.

Solvent Based Protective Sealers

•SuperSeal 2000 (Gloss or Matte)

•DecoGuard (Gloss or Matte)

•Tuf Seal J35•AggreGloss J25

Water Based Protective Sealers

•SuperSeal 20WB (Matte)

•DecoGuard WB (Low Sheen)

•MiraGard HDWB (Gloss or Matte)

•Smart Seal AU (Gloss or Matte) Newlook

Penetrating SealersPenetrating Sealers provide great protection to your concrete by penetrating the surface of the slab and creating a chemical barrier to salt and water damage. Unlike other sealers there is no

topical film that can be worn off.

• MiraGard Drylook Sealer • Enhancer Shield • Surf Guard SB 40

• Pavix


Epoxies & PolyasparticsState of the art resinous coatings for chip floors, quartz broadcasts and other high end

application including metallic floors like shown in the picture below, all from the industries top brands.

8 0 0 . 2 8 2 . 3 3 8 8 | w w w . b u t t e r f i e l d c o l o r . c o m

STEP FORM LINERS

T1000® STAMPABLE OVERLAY

SELECT GRADE® INTEGRAL COLOR

FLAT OUT® COUNTERTOP MIX

TABLE MOLD SYSTEM

CONCRETE BENCH MOLD SYSTEM

STAMPING TOOLSOXFORD SLATE TEXTURE


After

LIVING EARTH™ WATER BASED STAIN

Antique-It is a water soluble antiquing agent de-signed to impart a secondary color or highlight over stamped concrete or textured overlays. • Easy to apply • Dries Fast • Durable color with look of release

Antique-It

Miracote Mirastain is a water-based carrier concentrate solution designed to be field mixed with Miracote high-grade Colorpax-LIP • Can be used over existing concrete • Works over micro-toppings • Designed for use with water based sealers

Mirastain

Vivid Acid Stains

Concrete Coatings VIVID™ acid stain leaves little resi-due, making it easier to clean up than other acid stains on the market. Colors produced by this stain are deep and rich, as reflected in the VIVID™ name. • Antiqued marble effect • Easy to apply and maintain • Elegant, durable & versatile • Cost efficient

Exterior Kolour Dye TM is a translucent, UV stable dye, formulated using color designed to penetrate exterior and interior cementitious surfaces. Exterior Kolour Dye™ creates a unique, multi-colored translucent color scheme that unlike paints, will not crack, chip, or peel.

Exterior Kolour Dye™

Endura Solid Concrete Stain

Before

Reactive Stains & Water Based Stain

NewLook Endura Solid Stain is a single component concrete stain that is highly durable and easy to use. Developed to stain concrete, restore faded concrete or maintain concrete, Endura Solid Stain is affordable while being premium in quality & performance. The product is contractor grade and compatible with NewLooks extensive line of products

• Low build material• High performance single component stain• Appears natural upon application• Contractor grade


Living Earth™ Water-Based Stain is a safe, zero VOC, UV stable, water-based penetrat-ing concrete stain. Boring, lifeless concrete can be transformed into a multi-colored, antiqued, variegated surface. Typical appli-cations for Living Earth™ are cement-based floors, walls, ceilings, countertops, wall pan-els, and other architectural elements such as bare concrete or our G-100™, Stamp-Tek™, and Micro-Tek™ products, in both residential and commercial settings.

VIVID™ ACID STAIN• 11 Vibrant Colors

• Low Residue

• Easy to Use

Living Earth™ - Water Based Stain • 15 – UV Stable Colors

• Versatile Applications

• Seal Same Day

QuickDye™ – Acetone Dye• 28 Colors Available

• Interior Use Only

• Works w/ Polishing

SuperSeal™ 2000• Wetlook & Matte Options

• Salt & Alkali Resistant

• SlipGrip™ can be added

Cure & Seal 1315 * DuraPlex• Meets ASTM 1315 & 309

• 25% Solids

• Acrylic/Methyl Methacry-late Formula

CONNECTING PEOPLE, CREATIVITY, AND CONCRETE

Micro-Tek™ - ConcreteOverlayment

• Single Component (Just Add Water)

• Rough & Smooth Finishes

• Compatible with all CCI Colorants

CREATE THIS FLOOR WITH:

– Micro-Tek™

– VIVID™ ACID STAIN

– Durathane XT™


CONNECTING PEOPLE, CREATIVITY, AND CONCRETE

Durathane XT™ - Polyurethane• Gal. Coverage – 500-600 sq. ft.

• Eggshell Sheen

• Excellent Abrasion + Chemical Resistance

WE CAN NOW HELP YOU WITH

®®

Product Lines

Surface Prep

Overlayments

Cure & Seals

Water & Salt Repellents

Concrete Casting

Metallic Epoxy

Epoxy Flake

Air & Vapor Barriers

Clear & Pigmented

Acrylics

Polyaspartic’s

Polyurethane’s

Epoxys

CONTACT US!

Website - ConcreteCoatingsInc.com

Telephone # - 1.800.443.2871

ProTek™ - Polyaspartic• Excellent Abrasion & Chemical

Resistance

• Low Solid Primers

• High Build TopCoat

UV Shield™ - 100% Solid Epoxy• 100% Cross Linking Formula

• Excellent Hardness & Clarity

• Zero VOC & Faster Cure Rate

EZ-Wax™ - Sacrifical Coat• Gal. Coverage: 1,000-3,000 sq. ft.

• UV-Stable & Antimicrobial

• Mimics the sheen of the surface

www.bobcatoftherockies.com prices subject to change www.bobcatoftherockies.com 23


Stampable Overlays Microtoppings

Stampable Overlays & Microtoppings

COUNTERTOP MIX

Countertop Design Options: Many homeowners are taking advantage of concretes flexibility and its ability to incorporate other functional features such as integral sinks, drainboards, and butcher blocks.

Countertops are either pre-cast in a shop or built on site:

• Contractors who pre-cast like to pour in the shop where conditions are controlled, they use special casting tables, and they have the countertop in their possession while it is curing and until it can be adequately sealed.

• Contractors who like to build countertops on site like to do so because they can form the countertop to any client’s particular needs- radius edges, curved corners, etc.

Concrete Countertops

• Mirastamp

• OL60

• T1000 Fine Overlay

• Micro-Tek™ Micro-Toppings

•FLAT OUT® COUNTERTOP MIX

• PRO PACK® COUNTERTOP ADMIXTURE

EZ-Clean™ Extreme Coatings Stripper


EZ-Prep™

EZ-Clean™ is used as a neutralizer and light cleaner. Use after staining to neutralize and remove residue. EZ-Clean™ can also be used any other time a light cleaner is needed. Available in concentrate and ready-to-use formulas. Strong enough to neutralize, easy enough to clean.

• Removal as soon as 15 minutes• Semi-paste formula, In 1 & 5 gallon containers• For vertical & horizontal applications• Contains less than 50% by weight VOC content

EZ-Prep™ is used to etch, clean, degrease and remove rust from concrete. Use 10:1 prior to acid staining. Use 5:1 prior to resealing and use undiluted to etch concrete prior to placing an overlay or to remove heavy stains. Light, clean odor; non-reactive to skin and steel.

Nock -Off

• Multi-coatings stripper• Biodegradable formulation• No harsh fumes• Removes acrylic & urethanes

Prep Chemicals & Strippers

10027C - 48 oz.Acetone Sprayer$20.99

19049 - 3.5 GalExtreme IndustrialConcrete Sprayer$143.99

1949 - 3.5 Gal Industrial Viton Concrete Open Head Sprayer $99.99

22240XP - 2 Gal Industrial Acid Staining Sprayer $70.99

22149DL - 3.5 GalXtreme IndustrialConcrete Sprayer/Dripless Shutoff-Poly Can $122.99

1352 - 3 GalIndustrial MetalViton Concrete Open Head Sprayer $79.99

19249DL-3.5 Gal Xtreme Industrial ConcreteSprayer/DriplessShutoff- Steel Can$155.99

1046 - 48 oz.Industrial VitonCleaner/DegreaserSprayer $16.99

22

Sprayers

Rust Remover Concrete Cleaner

• Safe for use with scrubbing/cleaning machines• Excellent cleaner for daily mopping of sealed/ coating surfaces• VOC compliant for all areas of the US

• Concrete Rust Remover• Economic concentrated formula• Removes iron & metallic stains• Skin contact safer than muriatic acid

Color Hardener • Non-fading• Denser, more durable surface• Improves abrasion resistance• Can be antiqued and stained• 42 standard colors

COLORSPREADER™ gives the contractor

the ability to apply dry shake materials to the surface of concrete in it’s plastic state, faster, easier, and with more uniform coverage, producing a higher quality installation.• Increases reach

(remotely broadcast from up to 30’)• Reduces health risks• Reduces pigment loss• One year warranty

A Division of Solomon Colors, Inc.

Texturing Tools, Color, Finishing and Resurfacing

Antique Release• Prevents concrete buildup• Prolongs tool life• Unlimited effects and color

combinations

Antique-It is a water soluble antiquing agent designed to impart a secondary color or highlight over stamped concrete or textured overlays. Antique-It is easy to apply, dries fast and provides a durable color that closely resembles the look of release powder.

ARTesian StainThe color effect produced is unique to each stained surface and cannot be duplicated with other materials. ARTesian Stain contains no acids or harmful chemicals and works as an alternative to typical reactive acid stains. There are no acids or harmful chemicals integrated in its design.

Strip-It is an environmentally sound and user-safe stripper for water and solvent-based sealers and paints. Strip-It may be used on all masonry surfaces including concrete, quarry tile, ceramic tile, terrazzo, cementitious overlays and other surfaces.

Neutra Clean™BRICKFORM pH neutral cleaner is a cleaning and neutralizing agent engineered for use on acid and reactive stained floors prior to sealing and to remove light oil, grease or other types of soils from colored, imprinted and natural concrete surfaces.

E-ETCH is an environmentally friendly industrial strength floor cleaner, degreaser and light etching product. It is ideal for cleaning and preparing cementitious surfaces for acid staining, decorative overlays, water-based stains, and coatings applications.

cementitious surfaces for acid

• Creates a new 1/4” to 1/2” surface• Can be textured & colored• Durable• Use with Triple Seven Bond Coat

Stampable Overlay OL-60 is a premixed blend of special materials that, when mixed with water, forms a thin, concrete coating. This overlay is intended for use with Color Hardener and Antique Release.

Vertical Mix is a lightweight vertical overlay mix designed for texturing vertical surfaces up to 2” and creating simulated stone, rock, tile, slate and other natural surfaces. It is composed of cement, polymers, lightweight aggregates and admixtures. It may be applied to vertical surfaces such as wood, drywall, concrete, blocks etc.

Concrete Color and Texture

Integral Color Color Hardener

Color Hardener

• Non-fading• Denser, more durable surface• Improves abrasion resistance• Can be antiqued and stained

Antique Release

• Prevents concrete buildup• Prolongs tool life• Unlimited effects and color combinations


Concrete Texture & Mold Rentals

All sets are $100 per day per setSets vary depending on type

Stamps - 8 stamps 1 floppy & 1 tamper Texture Mats - 5 mats & 1 tamperBench Molds - 1 plank & 1 leg set

Table Molds - 1 table mold & 1 leg mold

Requires an open charge account or valid CO Drivers License & credit card. Available in Colorado Springs, Commerce City,

Golden, Parker and Windsor

SELECT GRADE® INTEGRALCONCRETE COLORANT• Packaged in pre-measured repulpable bags for accurate and convenient coloring of concrete.• 11 standard base colors provide 44 color options by varying the number of bags per cubic yard.

Bluestone Texture Mats

Oxford Slate Texture Mats

Italian Slate Texture Mats

Heavy Stone Texture Mats

Haldey Creek ShaleTexture Mats

Texture Skins

Texture Mats

FM3120Ashlar Cut Slate

w/o insert

FM312Ashlar Cut Slate

FM3150Ashlar

FM675Grand Ashlar

TM700Flagstone

TM100Ashlar

TM1300Castle Stone

FM8700Wood Plank

*More patterns available, check each store for availability and list of all patterns


• REBAR

• EXPANSION

• CUTTERS & BENDERS

• METAL FORMS

• DEE FORMS

• NAILS & STAKES

• WIRE TIES

• LITTLE GIANTS

• XFLATS

• CHAIRS

• MUSHROOM CAPS

• HAND TOOLS

• SPRAYERS

• SHOVELS & RAKES

• WIRE MESH

• TURNBUCKLES

• BOOTS

• HARDHATS

• SAFETY PRODUCTS

SHOPPING LIST

Globally Proven Construction Solutions

Globally Proven Construction Solutions

FEATURES BENEFITS

Extended working time High solids formulation that's easier to work with. Excellent flowability

High temperature and humidity tolerant Designed to excel in challenging environments

Improved settling time Decreases roller marks and improves finish

Non-hazing for thick build coating systems Peace-of-mind with an easy top coat finish

Works with existing polyaspartic pigments Easy mixing and simplified ordering for color applications

SPARTACOTE™

FLEX XPL™

Data Sheet 32830.0

Clear SPARTACOTE™ FLEX XPL™ Top Coat

Prepared SubstratePigmented SPARTACOTE FLEX XPL Prime Coat

Pigmented SPARTACOTE FLEX XPL Mid Coat

Usesn Residentialn Commercialn Institutional

PackagingSPARTACOTE™ FLEX XPL™ is a 2 Part A to 1 Part B Mix Ratio.n Part A Clear: 2 gallons (7.6 L) packaged in a 1 gallon (3.8 L) units. 5 gallon (18.9 L) units also available.

n Part A Pigment Base: 1.75 gallons (6.6 L) packaged in 3.5 gallon (13.2 L) unit. 3.75 gallons (14.2 L) packaged in a 5 gallon (18.9 L) unit also available.

n Part B: 1 gallon (3.8 L) packaged in a 1 gallon unit. 5 gallon (18.9 L) units also available. Suitable Substratesn Concrete

NEW

A high solids, low VOC resinous floor coating with extended working time

SPARTACOTE™ FLEX XPL™ is a high solids, low VOC resinous floor coating for both decorative and protective applications. This high performance coating has been engineered to retain a lower viscosity for longer periods of time, extending its working time and offering improved flow. SPARTACOTE FLEX XPL works with the following SPARTACOTE coating systems: Chip, Quartz, Metallic and Guard.


www.brickform.comwww.brickformtraining.com

Sign up today for your FREE CONTRACTOR PROFILE!

Your online tool for bringing homeowners, architects and decorative concrete contractors together

.commyconcretecontractor

DEFINING

DECORATIVECONCRETE

• Concrete Coloring Products• Color Hardener & Antique Release• Stains & Dyes• Stamps & Texture Skins• Concrete Dimensions Stencils• Surface Deactivator• Resurfacing Products• Premium Sealers• DAY1 Concrete Surface Technology• Decorative Concrete Training

PROUDLY MANUFACTURED BY SOLOMON COLORS right here in the United States, our products give contractors

the most detailed textures, brilliant colors, and reliable performance on the market.

SOLOMON COLORS, INC. | (800) 624-0261 • An Employee Owned Company4050 Color Plant Rd., Springfield, IL 62702 | Western Facility: 1371 Laurel Ave., Rialto, CA 92376

Download StampApp, the FREE decorative concrete augmented reality app that is revolutionizng how homeowners and contractors design hardscapes!


www.bobcatoftherockies.com Prices subject to change30

www.brickform.comwww.brickformtraining.com

Sign up today for your FREE CONTRACTOR PROFILE!

Your online tool for bringing homeowners, architects and decorative concrete contractors together

.commyconcretecontractor

DEFINING

DECORATIVECONCRETE

• Concrete Coloring Products• Color Hardener & Antique Release• Stains & Dyes• Stamps & Texture Skins• Concrete Dimensions Stencils• Surface Deactivator• Resurfacing Products• Premium Sealers• DAY1 Concrete Surface Technology• Decorative Concrete Training

PROUDLY MANUFACTURED BY SOLOMON COLORS right here in the United States, our products give contractors

the most detailed textures, brilliant colors, and reliable performance on the market.


Download StampApp, the FREE decorative concrete augmented reality app that is revolutionizng how homeowners and contractors design hardscapes!


www.bobcatoftherockies.com 31www.bobcatoftherockies.com Prices subject to change

Concrete Repair

HP Spartacote Fast Fix™ is a fast setting, two-component hybrid urethane concrete repair material. Ultra-low viscosity properties allow for deep penetration into concrete.

Quick-Repair 15 is a rapid setting, 2 part hybrid polyurea material used to repair cracks & spalls in concrete slabs. It is a low viscosity, low odor material with high tensile strength.

Miracote MiraPatch RM 2 is a two-compo-nent unit consisting of a synthetic rubber latex liquid which is blended and stabilized together with a dry component containing a dehydrating powder and curing chemicals.

Membrane C

Fast FixTM Quick-Repair 15 Rapid Set 100


Cementitious Repair Products

MiraPatch RM2

• Easy installation• Solved difficult bonding problems• Sound absorbing• Crack resistant• Excellent adhesion

MiraPatch RM3000Miracote MiraPatch RM3000 is a thin-section, rapid-hardening composition that is flexible, resilient and easy to clean. MiraPa-tch DP produces an extremely durable, low cost, yet attractive appearance

• Rapid setting• Rapid hardening• Faster cure speed in cold Weather• Can be applied to vertical and Overhead surfaces

Self Levelers

• Feather edge repairs• Minimal prep & downtime• Rapid application & set times• High impact resistance • Non-flamable

• Can be used down to -40o

• Edges can be feathered

Rapid Set 100 is a very fast setting, high strength ultra low viscosity concrete repair material. This two-part, hybrid urethane system is designed for rapidly rebuilding deeply spalled or damaged concrete.

• Minimal downtime• Works well in cool temperatures• Easy application• VOC compliant


MiraFlex Membrane C is a two-component, highly flexible, cementitious membrane for waterproofing concrete or masonry surfaces. Provides positive side waterproofing

• Permanent high flexibility• Vapor Permeable• Protects against de-icing salts• Resistant to abrasion• Wide range of colors

Crack Fillers

Econolevel™ Levelex®Econolevel™ is a cement based, non-shrink, self-leveling interior floor underlayment that only requires the addition of water to produce a flowable mixture that can be poured or pumped onto the floor.

• Walkable in 4 hrs• Up to 5” thick• Pumpable

DRYTEK LEVELEX is a cement-based easy-to-use, self-leveling underlayment designed for use over various substrates including concrete and ceramic tile.

• Pourable and pumpable• Inorganic; will not contribute to mold/ mildew growth• Suitable surface for most finished floor goods

Fritzpak Control FinishSurf-filmLythic Day 1Day1 is a finishing aid that lubricates the surface for faster, easier finishing. Day1 can also extend workable time by 15 to 30 minutes, even under adverse conditions.

Surf-Film Concentrate is a water based evaporation retardant and finishing aid for flat concrete work. Surf-Film Concentrate reduces the evaporation of surface mois-ture in warm, windy or dry conditions.

• Surface Evaporation Retarder• Excellent Finishing aid• Reduces Drag• Economical Concentrate formula

Fritz-Pak Control Finish is a dry powdered finishing aid, packaged in an easy-to-use water soluble pack that allows for easy preparation of solutions at the jobsite.

• Keeps surface moist• Excellent in hot or dry weather• Improves application of color hardener & stamping

Finishing Aids

• Lubricates for more efficient surface closing• Increases compressive surface strength• Hardens and densifies

www.bobcatoftherockies.com

Made In The USASince 1981

PROFESSIONALCONCRETETOOLS

www.KraftTool.com

15


AND WE STILL HAVEN’T REACHED OUR PEAK.

PROUDLY SERVING THE ROCKIES SINCE 1965

Use For:• Pedestrian walkways• Atriums & courtyards• Driveways• Balconies• Pool decks and promenades• Plaza decks & topping slabs• Parapets and columns• Walls & vertical surfaces• Parking Garages and Ramps

Headquarters: 800.692.3502West Coast: 310.631.6594 East Coast: 908.245.2808

MPC Multipurpose Protective Coating

Crossfield Products Corp. | miracote.com | 800.692.3502 | [email protected]

Renovate, Waterproof and Protect with the Versatility of MPC

Form#583

Features:• Water vapor permeable – reduces

corrosion of rebar• Excellent adhesion and flexibility on

concrete and other substrates• Prevents intrusion of water, chlorides

and carbon dioxide• Excellent resistance to freeze thaw

cycles, impact and abrasion• Ideal for interior and exterior

applications• Suitable for both pedestrian and

vehicular traffic• Extensive choice of colors and

textures – enhanced curb appeal

Product Applications:• Resurface and restore concrete• Deferred concrete floor toppings• Commercial, retail & residential flooring• Educational & institutional flooring• Food & beverage areas• Hotels and resorts• Mechanical equipment rooms• Raised access floor waterproofing



Headquarters: 800.692.3502West Coast: 310.631.6594 East Coast: 908.245.2808

Miraflex Membrane C

Crossfield Products Corp. | miracote.com | 800.692.3502 | [email protected]

Flexible Vapor Permeable Cementitious Waterproofing Membrane

Form#583

Advantages:• Superior UV resistance and permanent flexibility.• Tenacious adhesion to damp or moist substrates• Water vapor permeable – breathable membrane• Outstanding elongation and crack-bridging properties• Ideal for interior and exterior applications• Extensive range of colors using Miracote Colorpax LIP

Applications:• Fountains, pools, spillways, dams and aquatic tanks• Plaza decks and pedestrian bridges• Balconies and breezeways• Pool decks and promenades• Mechanical equipment rooms• Water and wastewater facilities• Elevator pits and containment structures • Waterproofing of planter boxes and foundations

MiraFlex Membrane C is a flexible, vapor permeable cementi-tious membrane for waterproofing and protection of concrete, masonry and other types of materials and components. It provides superior waterproofing protection that will withstand exposure to chlorides, sulfates, UV, abrasion, impact, hydro-static pressure and freeze thaw cycling.



5th Annual Colorado Concrete Expo

Wednesday, December 11th, 2019Adams County Fairgrounds

9755 Henderson RdBrighton, CO 80601

• Decorative concrete demonstrations •New product launches •Latest concrete equipment •Industry experts •Great opportunity to network •$15,000+ in Door prizes •Samples

www.coloradoconcreteexpo.com, you can register there, see a list of vendors and a

schedule of demonstrations.

our technical sales representatives provide expert advice ... · • trouble shooting •...

Documents