osram uk | oem seminar 2007 backlight generation 2 a roll has two led chains 4.8m long 60 individual...
TRANSCRIPT
OSRAM UK | OEM Seminar 2007
BACKlight Generation 2
A roll has two LED chains 4.8m long 60 individual boards with two LEDs each
Colours available: Super red, red, orange, yellow, green, blue & white
One-time connection with the control gear reduces installation costs
A special coating is applied to protect against moisture and condensation
Chain separation gives enhanced flexibility
Optimised for use with OPTOTRONIC®
Ideal for installation in narrow lettering
More power for your signs
OSRAM UK | OEM Seminar 2007
BACKLIGHT Generation 4
A roll has two LED chains 2.4m long
30 individual boards with four LEDs each
One time connection with control gear reduces installation costs
A special coating is applied to protect against moisture and condensation
Chain separation gives enhanced flexibility
Available in red, green, blue and white
Optimised for use with OPTOTRONIC®
Ideal for installation in large, low profile letters
You want more?
OSRAM UK | OEM Seminar 2007
OPTOTRONIC®
An optimally designed control gear is necessary to operate LED-modules according to the required features
OPTOTRONIC® guarantees a reliable and optimal operation of different LED-modules
OSRAM UK | OEM Seminar 2007
COINlight® modules – CM01E
33mm diameter module
Screw terminals for easy connection
24V operation
CM01E – Vertical emitting with 9 LEDs
Luminous output 0.12 to 2.15lm
Power consumption 1.2 to 1.5 Watts
Ideal for effect lighting
MR11 ?
OSRAM UK | OEM Seminar 2007
EFFECTlight®
The effect light module incorporates a sophisticated lens design
High intensity narrow beam from an array of 10 LED’s
Modules can be stacked end to end as required
Height - 35 mm
Power consumption - 0.95 to 1.2W
Used as an extremely narrow-beam LED module for lighting effects on facades, walls, columns and arches.
An architectural solution
OSRAM UK | OEM Seminar 2007
LINEARlight® flex – LM10A & LM11A
Flexible version of LINEARlight®
Vertical (LM10A) or side emitting (LM11A) versions
Supplied on rolls 8.4m (vertical) and 4.2m (side) long
Self adhesive backing (3M VHB)
Minimum bend radius 20mm
May be bent at 90º (between components) once only to fit into corners
Can be cut with scissors!
Flexibility is the key
OSRAM UK | OEM Seminar 2007
LINEARlight Flex
POWER Flex
DRAGONtape®
Lumen / LED 2,5 12 25
Lumen / m179 500 1000
Length [mm] 8400 2800 150
Power [W]86,3 72 8,4
LINEARlight with Dragon performance
LINEARlight POWER Flex
Ideal for cove lighting and handrail illumination
OSRAM UK | OEM Seminar 2007
OPTOTRONIC®
An optimally designed control gear is necessary to operate LED-modules according to the required features
OPTOTRONIC® guarantees a reliable and optimal operation of different LED-modules