orthodontic instruments - headdental · head dental instruments are basically made from the marten-...
TRANSCRIPT
ORTHODONTICINSTRUMENTS
Japanese-made Supreme Quality Instruments
Washing : Flush visible stains and tissue. Concise processing – washing by hand / ultrasonic cleaner
Chemical processing – cleaning agent / ultrasonic cleaner with cleaning agent
Disinfection : Making power of harmful microorganism lower to the human body
Concise processing – Boiling disinfection / Filtration
Chemical processing – Disinfectant (chemical solution)
Sterilization : Removal of microorganism for asepsis
Concise processing – AutoclaveChemical processing – EOG (ethylene oxide gas)
HEAD DENTAL instruments are basically made from the marten-
sitic stainless steel. It is the most suitable material known form
the dental instruments because the proper hardness, strength,
and toughness can be realized by hear treatment. The stainless
steel is a kind of metal alloy that forms on surface stable film
effective is damaged. Please care the instruments as following
procedures to use for a long term.
●
●
Lubricate periodically on all instruments with hinges, locks and
the other moving parts such as forceps, pliers, scissors and
needle-holders.
Sharpness of blades decreases by wear-out or damage.
When the sharpness becomes dull, ask us resharpening or
reconditioning without delay.
CHARACTERISTIC OF STAINLESS STEEL
USUAL CARE
CARE AFTER USE
①
※
①
②
③
④
⑤
Check if the instrument is in good condition to use it again.
Flush blood, fat or protein from the surface before it dries.
Cleaning agent is which rust prevention is effective is
recommended. Use it according to directions of the
manufacturer.
Water temperature from 40°C to 60°C (104°F to 140°F) is the
most effective in the ultrasonic cleaner. Place instruments in
open position in a way that they do not touch each other on a
tray in order to avoid insufficient cleaning.
Pliers with blades such as cutters should avoid ultrasonic-
cleaning. The blades can be damaged due to vibration.
①
②
③
④
Dry the instruments completely after sterilization. Oiling at the
joint is recommended for the instruments with moving parts
such as forceps, pliers, and needle-holders.
Recommended the sterilization by autoclave or by EOG.
Use the autoclave below temperature of 132°C (269.6°F) in
dry room.
Do not use the high pressure steam sterilization with the
medicine made of alcoholic content.
Keep the instruments dry.
Glutaral is recommended to use. Do not use the following
solution. Sodium hypochlorite, Benzalkonium chloride,
Benzathonium chloride, Povidone-Iodine, Phenol,
Formaldehyde, Chlorhexidine Guluconate, Functional Water
(super-acid water, oxidation water), Household detergent
Cutting Pliers
Utility Pliers
Bending Pliers
Arch Forming Instrument
Banding Pliers
Banding Instrument
Pin & Ligature Cutters 1Hard Wire Cutters 2Ligature Cutters 2Distal End Cutters 3Flat Cutters 4Wire Cutters 4
Bonding Instrument
Ligating Instrument
Debonding Pliers
Crimping Pliers
Replacements
How Pliers 5Weingart Utility Plier 5Weingart Utility Pliers 6
Loop Forming Pliers 7Torquing Pliers 8Bird Beak Pliers 9Light Wire Pliers 9Facebow Adjusting Pliers 10Wire Bending Pliers 11Cinch Back Pliers 12Quad Helix Bending Pliers 12
Arch Forming Pliers 13Arch Turret 14
Band Removing Pliers 15Band Contouring Pliers 16
Elastic Separating Pliers 17Band Pusher 17
Bracket Placers 18Bracket Positioning Gauge 18
Ligating Instrument 19
Bracket Removing Pliers 23Bond Removing Pliers 24
Hook Crimping Pliers 25
Replacement Parts 26
15 10 25 0
orthodontic instruments
1 ORTHODONTIC INSTRUMENTS
Pin & Ligature CutterMaximum Cutting CapacityLigature wires up to .016”Elastic LigaturesLength: 119mmMSRP: $166.90
6043WPin & Ligature Cutter MiniatureMaximum Cutting CapacityLigature wires up to .016”Elastic LigaturesLength: 116mmMSRP: $166.90
6053WPin & Ligature Cutter SlimMaximum Cutting CapacityLigature wires up to .015”Length: 126mmMSRP: $139.10
6056S
Pin & Ligature CutterMaximum Cutting CapacitySoft wires up to .015”Length: 120mmMSRP: $139.10
6046Pin & Ligature Cutter MiniatureMaximum Cutting CapacitySoft wires up to .015”Length: 120mmMSRP: $139.10
6056Pin & Ligature CutterMaximum Cutting CapacityLigature wires up to .016”Elastic LigaturesLength: 120mmMSRP: $139.10
HS-15
1/1
CUTTING PLIERS
PIN & LIGATURE CUTTERS
15 10 25 0
2ORTHODONTIC INSTRUMENTS
Pin & Ligature Cutter SlimMaximum Cutting CapacitySoft wires up to .015”Length: 120mmMSRP: $139.10
6066SAngular Ligature Cutter 45° AngledMaximum Cutting CapacitySoft wires up to .015”Length: 122mmMSRP: $139.10
6206Hard Wire CutterMaximum Cutting CapacityHard wires up to .020” roundLength: 119mmMSRP: $139.10
6046H
Ligature Cutter 40° AngledMaximum Cutting CapacityLigature wires up to .008”Length: 134mmMSRP: $166.90
P-400
Reversed Ligature Cutter 40° AngledMaximum Cutting CapacityLigature wires up to .008”Length: 134mmMSRP: $166.90
P-410
The smallest possible edges with the angle of 40 degrees allow easy access to the lingual area and offer wide view into the mouth.Two models are available in the same cutters. The operation can choose one of two; regular or reversed edges according to operative area. It assumes proper operation in a wide view.The curve of the handle was conventionally located below with the sharper curving line. It allows stable feeling of grip in operation at the hard to reach area.
1/1
1/1
HARD WIRE CUTTER
LIGATURE CUTTERS
15 10 25 0
orthodontic instruments
10°
3 ORTHODONTIC INSTRUMENTS
CUTTING PLIERS
DISTAL END CUTTERS 1/1
Distal End Safety CutterMaximum Cutting CapacityRectangular wires up to .022”×.028”Round wires up to .020”Braided wires up to .016”Length: 115mmMSRP: $155.00
5503Distal End Safety CutterMaximum Cutting CapacityRectangular wires up to .022”×.028”Round wires up to .020”Braided wires up to .016”Length: 120mmMSRP: $155.00
5503S
Distal End Safety CutterMaximum Cutting CapacityRectangular wires up to .022”×.028”Round wires up to .020”Braided wires up to .016”Length: 147mmMSRP: $155.00
5503SL
Distal End Safety Cutter Slim Flush CutMaximum Cutting CapacityRectangular wires up to .022”×.028”Round wires up to .020”Braided wires up to .021”×.025”Length: 121mmMSRP: $174.80
5503SF
Flush Cut permits to cut wires flush to buccal tubes.Holds any size of wires made of stainless steel or Nit-Ti alloy at the hold ring in heat-proof rubber.
Replacement Hold Ring (10/pk.)MSRP: $17.00
Refer Tip List on P.26 for details
9503
15 10 25 0
4ORTHODONTIC INSTRUMENTS
FLAT CUTTER
WIRE CUTTERS
Distal End Safety Cutter Flush Cut Long HandleMaximum Cutting CapacityRectangular wires up to .022”×.028”Round wires up to .020”Braided wires up to .021”×.025”Length: 147mmMSRP: $174.80
30-550FL
Power CutterMaximum Cutting CapacityHard & Soft wires up to 1.5mm (0.059”)Length: 168mmMSRP: $59.90
0046
Maximum Cutting CapacityCut at top: φ1.0mmCut at side: φ1.2mmLength: 132mmMSRP: $95.40
Wire NipperMaximum Cutting CapacityHard & Soft wires up to 1.2mm (0.047”)Length: 153mmMSRP: $81.00
WIRE NIPPER #3
Replacement Hold Ring (10/pk.)MSRP: $17.00
Refer Tip List on P.26 for details
9503
1/1
1/1
1/1
▼10°
15 10 25 0
orthodontic instruments
5 ORTHODONTIC INSTRUMENTS
UTILITY PLIERS
HOW PLIERS
WEINGART UTILITY PLIER
1/1
How PliersTips: 3.2mm (1/8”) diameterLength: 138mmMSRP: $127.20
3066THow PliersTips: 3.2mm (1/8”) diameterLength: 138mmMSRP: $95.40
3066How Pliers SmallTips: 2.4mm (3/32”) diameterLength: 138mmMSRP: $95.40
3076
How Pliers OffsetTips: 3.1mm (1/8”) diameterLength: 136mmMSRP: $95.40
3086Weingart Utility PliersLength: 147mmMSRP: $95.40
5046
15 10 25 0
6ORTHODONTIC INSTRUMENTS
1/1
WEINGART UTILITY PLIERS
Pin & Ligature CutterWeingart Utility PliersLength: 127mmMSRP: $131.10
5023TWeingart Utility PliersLength: 136mmMSRP: $127.20
5016T
Weingart Utility PliersLength: 136mmMSRP: $95.40
5016Weingart Utility PliersLength: 128mmMSRP: $95.40
HS-20
15 10 25 0
orthodontic instruments
7 ORTHODONTIC INSTRUMENTS
BENDING PLIERS
LOOP FORMING PLIERS1/1
Young PliersMaximum Bending CapacityWires up to .040”Length: 120mmMSRP: $95.40
0746Jarabak PliersMaximum Bending CapacityWires up to .020”Length: 127mmMSRP: $95.40
2136Loop Forming PliersMaximum Bending CapacityWires up to .022”Length: 125mmMSRP: $103.30
3056
Tweed Loop Forming PliersMaximum Bending CapacityWires up to .022”Length: 131mmMSRP: $95.40
3046Omega Loop Forming PliersMaximum Bending CapacityWires up to .022”Length: 132mmMSRP: $95.40
3046STweed Loop Forming PliersMaximum Bending CapacityRectangular wires up to .022”×.028”Length: 124mmMSRP: $143.00
3046TR
Replacement Tip (1/pk.).043” and .063” diameterMSRP: $17.00
9806
Hex Wrench (1/pk.)MSRP: $2.00
Refer Tip List on P.26 for details
9716
15 10 25 0
8ORTHODONTIC INSTRUMENTS
TORQUING PLIERS
1/1
1/1
1.9
φ1.3
φ1.8
φ2.2
Kim Pliers with CutterMaximum Bending CapacityRectangular wires up to .016”×.022”Length: 121mmMSRP: $174.80
4306CKNance Closing Loop PliersMaximum Bending CapacityWires up to .022”Beaks are parallel at .020” openingLength: 117mmMSRP: $95.40
3026
Tweed Arch Bending PliersMaximum Bending CapacityRectangular wires up to .022”×.028”Beaks are .060” wide, parallel at .020” openingLength: 117mmMSRP: $127.20
3036TTweed Arch Bending PliersMaximum Bending CapacityRectangular wires up to .022”×.028”Beaks are .043” wide, parallel at .020” openingLength: 117mmMSRP: $127.20
3036
15 10 25 0
orthodontic instruments
9 ORTHODONTIC INSTRUMENTS
BENDING PLIERS
BIRD BEAK PLIERS
LIGHT WIRE PLIERS
1/1
1/1
Bird Beak PliersMaximum Bending CapacityWires up to .032Length: 117mm”MSRP: $131.10
3143TBird Beak PliersMaximum Bending CapacityWires up to .030”Length: 117mmMSRP: $95.40
3146
Light Wire Pliers with Cutter – Grooved Square TipMaximum Bending CapacityWires up to .020”Length: 120mmMSRP: $139.10
3153CLight Wire Pliers – Grooved Square TipMaximum Bending CapacityWires up to .020”Length: 120mmMSRP: $131.10
3153TLight Wire Pliers – Grooved Square TipMaximum Bending CapacityWires up to .018”Length: 124mmMSRP: $95.40
3156
.040".040"
.027".027" .027".027"
15 10 25 0
10ORTHODONTIC INSTRUMENTS
FACE BOW ADJUSTING PLIERS
1/1
1/1
Light Wire Pliers with CutterMaximum Bending CapacityWires up to .020”Length: 120mmMSRP: $139.10
3163CLight Wire PliersMaximum Bending CapacityWires up to .020”Length: 120mmMSRP: $131.10
3163TLight Wire PliersMaximum Bending CapacityWires up to .018”Length: 124mmMSRP: $95.40
3163
Head Gear PliersMaximum Bending CapacityWires up to .051” (1.3mm)Length: 140mmMSRP: $103.30
0096
.027".027" .027".027"
15 10 25 0
orthodontic instruments
11 ORTHODONTIC INSTRUMENTS
BENDING PLIERS
WIRE BENDING PLIERS 1/1
Three Jaw PliersMaximum Bending CapacityWires up to .028”Length: 120mmMSRP: $131.10
3136TThree Jaw PliersMaximum Bending CapacityWires up to .028”Length: 125mmMSRP: $95.40
3136Heavy Three Jaw PliersMaximum Bending CapacityWires up to .036”Length: 122mmMSRP: $95.40
3136L
Adams Pliers (Universal)Maximum Bending CapacityWires up to .040”Length: 132mmMSRP: $119.20
2146THeavy Wire Bending PliersMaximum Bending CapacityWires up to .047” (1.2mm)Length: 140mmMSRP: $155.00
3146TLWire Bending PliersMaximum Bending CapacityWires up to .028” (0.7mm)Length: 120mmMSRP: $139.10
3146TS
.040".040" .050".050" .035".035"
15 10 25 0
12ORTHODONTIC INSTRUMENTS
CINCH BACK PLIERS
QUAD HELIX BENDING PLIERS
1/1
1/1
Stop PliersMaximum Bending CapacityWires up to .025”Length: 121mmMSRP: $131.10
2246TTie Back PliersMaximum Bending CapacityNi-Ti Wires up to .025”Length: 135mmMSRP: $139.10
9006
Angled Three Jaw Pliers – LeftMaximum Bending CapacityWires up to .036” (0.9mm)Length: 130mmMSRP: $147.00
2016LAngled Three Jaw Pliers – RightMaximum Bending CapacityWires up to .036” (0.9mm)Length: 130mmMSRP: $147.00
2016R
Quad Helix Bending PliersMaximum Bending CapacityWires up to .036” (0.9mm)Length: 125mmMSRP: $155.00
2026T Used for small adjustment of quad helix or lingual arch. Narrow beaks allow easy access to lower jaw.
By simply selecting either left or right side of the head along with gripping method, you can bend wire in “cinch-back” for both directions, buccal and lingual, at both jaw sides, left and right, on both jaw positions, upper and lower.
In order to achieve secure-grip, anti-slip finish is applied on both sides of head where wire is bent.
Replacement Tip (1/pk.).063” (1.6mm) diameterMSRP: $17.00
9706
Hex Wrench (1/pk.)MSRP: $2.00
Refer Tip List on P.26 for details
9716
15 10 25 0
orthodontic instruments
13 ORTHODONTIC INSTRUMENTS
ARCH FORMING INSTRUMENTS
ARCH FORMING PLIERS1/1
Tweed Arch Bending PliersMaximum Bending CapacityRectangular Wires up to .022” × .028”Beaks are .060” wide, parallel at .020” openingLength: 117mmMSRP: $127.20
3036TTweed Arch Bending PliersMaximum Bending CapacityRectangular Wires up to .022” × .028”Beaks are .043” wide, parallel at .020” openingLength: 116mmMSRP: $95.40
3036
Hollow Chop PliersMaximum Bending CapacityWires up to .022”Length: 125mmMSRP: $95.40
0066Arch Forming Pliers - GroovedGrooves are of .016”, .018” and .022”Length: 116mmMSRP: $139.10
2236TGArch Forming Pliers – Non-groovedLength: 116mmMSRP: $131.10
2236T
15 10 25 0
14ORTHODONTIC INSTRUMENTS
ARCH TURRET (ARCH FORMER)
Arch Turret (Arch Former)Length: 105mmMSRP: $155.00
8406
1/1
AVAILABILITY OFSLOT SIZE & TORQUE (○:YES ×:NO)
SLOTSIZE
TORQUE.016"
○
○
○
.017"
○
×
×
.018"
○
○
○
.0215"
○
○
○
0°
7°
14 °
15 10 25 0
orthodontic instruments
15 ORTHODONTIC INSTRUMENTS
BANDING PLIERS
BAND REMOVING PLIERS1/1
Posterior Band Removing PliersLength: 131mmMSRP: $139.10
1046TPosterior Band Removing Pliers - LongLength: 131mmMSRP: $139.10
1046TL
Posterior Band Removing PliersLength: 131mmMSRP: $95.40
1046Posterior Band Removing PliersLength: 131mmMSRP: $95.40
HS-30
Replacement Aluminum Tip (3/pk.)MSRP: $10.00
Refer Tip List on P.26 for details
9866
Replacement Aluminum Tip (3/pk.)MSRP: $10.00
Refer Tip List on P.26 for details
HS-986
Replacement Peek Tip (3/pk.)MSRP: $13.00
Refer Tip List on P.26 for details
9836Replacement Peek Tip (3/pk.)MSRP: $13.00
Refer Tip List on P.26 for details
9836
15 10 25 0
16ORTHODONTIC INSTRUMENTS
BAND CONTOURING PLIERS1/1
Band Contouring PliersLength: 124mmMSRP: $149.00
2086Crown Contouring PliersLength: 123mmMSRP: $149.00
2126
Crown Crimping PliersLength: 117mmMSRP: $149.00
3176Crown Crimping Pliers – SmallLength: 119mmMSRP: $149.00
3176S
15 10 25 0
orthodontic instruments
17 ORTHODONTIC INSTRUMENTS
BANDING INSTRUMENTS
ELASTIC SEPARATING PLIERS
BAND PUSHERS
1/1
1/1
Elastic Separating PliersLength: 163mmMSRP: $119.20
7016
Band PusherLength: 133mmMSRP: $66.00
8106
Band Pusher – Silicone HandleLength: 133mmMSRP: $72.00
8106A
Band Pusher – Trihedral HandleLength: 142mmMSRP: $66.00
8116
15 10 25 0
18ORTHODONTIC INSTRUMENTS
BONDING INSTRUMENTS
BRACKET PLACERS
BRACKET POSITIONING GAUGE
1/1
1/1
Bracket Placing TweezersLength: 140mmMSRP: $47.70
8156
Bracket Setting TweezersLength: 175mmMSRP: $56.60
Triple angled tip achieves better visibility as well as operation. Thin tips fit in the wing of bracket. The tip surface tangible to bracket is finished flat for secure grip.
8906
Boon Bracket Positioning GaugeLength: 64mmHeight: 3.5mm / 4.0mm / 4.5mm / 5.0mmMSRP: $55.70
8306
Diamond TweezersLength: 155mmMSRP: $56.60
2716D
15 10 25 0
orthodontic instruments
19 ORTHODONTIC INSTRUMENTS
LIGATING INSTRUMENTS
LIGATING INSTRUMENTS1/1
Ligature Tying Pliers – Coon TypeLength: 165mmMSRP: $139.10
1016CLigature Tying PliersLength: 165mmMSRP: $127.20
1026Ligature Forming PliersLength: 121mmMSRP: $131.10
2256T
Ligature Instrument – Mathieu TypeLength: 155mmMSRP: $103.30
215N
15 10 25 0
20ORTHODONTIC INSTRUMENTS
1/1
Elastic Placing Pliers – Hook TipLength: 142mmMSRP: $111.30
2166
Ligating Pliers – Round HeadLength: 150mmMSRP: $111.30
2156R
Ligating PliersLength: 155mmMSRP: $111.30
2176
Round tips allow secure wire-hold and shorten ligating time. Extremely smooth open and close achieved by the cross spring adopted greatly reduces operation fatigue.
15 10 25 0
orthodontic instruments
21 ORTHODONTIC INSTRUMENTS
LIGATING INSTRUMENTS
LIGATING INSTRUMENTS 1/1
Ligature Utility PliersLength: 147mmMSRP: $111.30
2196
Elastic Separating PliersLength: 122mmMSRP: $61.20
2186
Mosquito Forceps – StandardLength: 122mmMSRP: $51.70
801NMosquito Forceps – StandardLength: 122mmMSRP: $51.70
802N
The newest concept in utility pliers for ligating operation with module or ligature as well as the other multiple services HOW pliers offer.
Comparing with the standard HOW pliers, this is new model forms a narrow oval between the closed handles. The width between two handles measures about 1cm less than the regular HOW pliers and it allows rotating of the pliers easily.
Operation with module Operation with ligature wire
▲|||||
▲|||||41mm
15 10 25 0
22ORTHODONTIC INSTRUMENTS
1/1
Ligating and DirectorLength: 172mmMSRP: $42.80
8176
Ligature Director – Double EndLength: 164mmMSRP: $42.80
8186
Ligature DirectorLength: 147mmMSRP: $38.80
8196
Ligature DirectorLength: 175mmMSRP: $42.80
8166
Diamond Ligature DirectorLength: 149mmMSRP: $42.80
8196D
The diamonds are electrodeposited in the point. Being not to slide, wire can be placed properly.
15 10 25 0
orthodontic instruments
23 ORTHODONTIC INSTRUMENTS
DEBONDING PLIERS
BRACKET REMOVING PLIERS1/1
Bracket Removing PliersLength: 122mmMSRP: $155.50
P-200
Direct Bond Attachment Removing Pliers – StraightLength: 127mmMSRP: $139.10
3356TDirect Bond Attachment Removing Pliers – StraightLength: 121mmMSRP: $95.40
HS-25Direct Bond Attachment Removing Pliers – AngledLength: 123mmMSRP: $95.40
HS-26
Direct Bond Attachment Removing Pliers – AngledLength: 126mmMSRP: $139.10
3346TThe blades can catch the bracket’s edge by sliding on the surface of the teeth and come beneath the attachment without efforts. The blade edge comes to touch at point, not a line contact, it reduces resistance for easy control.
15 10 25 0
24ORTHODONTIC INSTRUMENTS
BOND REMOVING PLIERS
1/1
1/1
Bond Removing PliersLength: 137mmMSRP: $155.50
P-210
Lingual Bracket Removing PliersLength: 153mmMSRP: $185.50
P-500
Bond Removing PliersLength: 135mmMSRP: $149.00
3326T
Well-rounded shape of inside tips achieves its secure touch to un-smooth surface in the lingual side of mouth.
The system that deforms bracket for removal by applying force at both sides of bracket reduces patient’s fatigue.
Replacement Peek Tip (3/pk.)Refer Tip List on P.31 for detailsMSRP: $13.00
9836
Replacement Metal Tip (1/pk.)Both ends can useMSRP: $24.00
P-211
Hex Wrench (1/pk.)MSRP: $2.00
Refer Tip List on P.26 for details
9716
Replacement Metal Tip (1/pk.)MSRP: $25.00
98716
Replacement Tube (15cm/pk.)MSRP: $7.00
Refer Tip List on P.26 for details
98726
15 10 25 0
orthodontic instruments
25 ORTHODONTIC INSTRUMENTS
CRIMPING PLIERS
HOOK CRIMPING PLIERS1/1
Hook Crimping PliersLength: 119mmMSRP: $155.50
P-220
Hook Crimping PliersLength: 116mmMSRP: $127.20
4466
The beak that has unique grip from pressures a hook firmly on the wire to lock securely. The flat handle of PROTHO lightens stress on the plain.
For quick and precise installation of hook on arch-wires.
Pressing mechanism (Front view)
Installing a hook
15 10 25 0
26ORTHODONTIC INSTRUMENTS
REPLACEMENTS
9503Replacement Hold Ring (10/pk.)MSRP: $17.00Use with 5503SF / 5503FL
P-211Replacement Metal Tip (1/pk.)Both ends can useMSRP: $24.00Use with P-210
9706Replacement Tip (1/pk.).063” (1.6mm) diameterMSRP: $17.00Use with 2026T
9806Replacement Tip (1/pk.).043” and .063” diameterMSRP: $17.00Use with 3046TR
9836Replacement Peek Tip (3/pk.)MSRP: $13.00Use with P-210 / 1046T / 1046TL
9866Replacement Aluminum Tip (3/pk.)MSRP: $10.00Use with 1046
HS-986Replacement Aluminum Tip (3/pk.)MSRP: $10.00Use with TS-30 / P-210 / 1046T / 1046TL
98716Replacement Metal Tip (1/pk.)MSRP: $25.00Use with 3326T
98726Replacement Tube (15cm/pk.)MSRP: $7.00Use with 3326T
9716Hex Wrench (1/pk.)MSRP: $2.00Use with 2026T / 3046TR / P-210
Tips look similar but not interchangeable
www.headdental.com
17972 Sky Park Circle, Suite JIrvine, CA 92614Phone : 949-474-0176Fax : 949-474-1736