1. PRINT OUT THE PATTERN ON HEAVY CARD STOCK

2. CUT OUT THE PAPER PATTERN PIECES

3. TRACE THE PATTERN PIECES ONTO LEATHER

4. CUT OUT THE LEATHER PIECES

5. BURNISH ALL POCKET TOPS BEFORE ASSEMBLY

6. GLUE POCKETS A TO POCKETS C USING TOP POCKET GUIDE, STITCH ACROSS BOTTOM

7. GLUE POCKETS B TO POCKETS C, TRIM

8. STITCH DOWN MIDDLE OF POCKET ASSEMBLY

9. (OPTIONAL) GLUE WALLET BODY TO LINER +TRIM

10. SET SNAPS IN SNAP FLAPS, GLUE TO POCKET ASSEMBLIES

11. GLUE POCKET ASSEMBLIES TO WALLET BODY, STITCH AROUND OUTSIDE. TRIM AND FINISH EDGES AS DESIRED.

12. ENJOY :)

ORDER OF OPERATIONS

LONG WALLET WALLET

RECOMMENDED LEATHER WEIGHT

5oz exterior // 3oz interior

WALLET BODY

POCKET B(Cut 2x)

PRINT ACCURACY TESTTHE SOLID LINE SHOULD MEASURE 2 INCHES LONG

POCKET C(Cut 2x)

PRINT ACCURACY TESTTHE SOLID LINE SHOULD MEASURE 2 INCHES LONG

POCKET A(Cut 2x)

SNAP FLAP

(Cut 2x)

TOP POCKET GUIDE

(USE THIS PATTERN TO LINE UP THE TOP POCKET ON SIDE 1 & 2)

CUT OUT PATTERN

MARK TOPS OF POCKETS LEATHER MAIN BODY PIECE WITH SCRATCH AWL

GLUE LEATHER TOP POCKET INTO PLACE

FLIP OVER FOR USE ON OTHER SIDE