oracle® tuxedo...running simpapp to verify the oracle tuxedo corba c++ software installation . ....

Oracle® Tuxedo Installing the Oracle Tuxedo System

12c Release 1 (12.1.1)

June 2012

Installing the Oracle Tuxedo System, 12c Release 1 (12.1.1)

Copyright © 1996, 2012, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Contents

1. Preparing to Install the Oracle Tuxedo SystemOracle Tuxedo Web Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Oracle Tuxedo Software Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Tuxedo .NET Workstation Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

LLE and SSL Levels of Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Hardware and Software Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Temporary Storage Space Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Interprocess Communication Resources Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Oracle Installation Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Previous Tuxedo Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Installation Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Cancelling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Install Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Oracle Home Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Choosing a Oracle Home Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Understanding the Functions of the Oracle Home Directory . . . . . . . . . . . . . . . . 1-11

Creating More Than One Oracle Home Directory. . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Installation Road Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

2. Installing Oracle Tuxedo Using GUI-Mode InstallationWhat Is GUI-Mode Installation?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Installing the Oracle Tuxedo System iii

Before You Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Starting GUI-Mode Installation on a Windows System. . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Starting GUI-Mode Installation on a UNIX System . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Running GUI-Mode Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Assigning File Ownership on a UNIX System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Understanding the Oracle Tuxedo Shortcuts on a Windows System. . . . . . . . . . . . . . 2-11

Understanding the Oracle Administration Program on a Windows System . . . . . . . . 2-12

Reviewing the Windows Server Registry Content. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Developer Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Environment Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Security Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

What Do I Do Next?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

3. Installing Oracle Tuxedo on UNIX Systems Using Console-Mode Installation

What Is Console-Mode Installation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Before You Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Starting Console-Mode Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Running Console-Mode Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

What Do I Do Next?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

4. Installing Oracle Tuxedo Using Silent InstallationWhat Is Silent Installation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Before You Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Using Silent Installation: Main Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Creating a Template File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Invoking the Silent Installation Process on a Windows System . . . . . . . . . . . . . . . . . . 4-6

Invoking the Silent Installation Process on a UNIX System . . . . . . . . . . . . . . . . . . . . . 4-7

iv Installing the Oracle Tuxedo System

Windows Template File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

UNIX Template File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

What Do I Do Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

5. Upgrading the Oracle Tuxedo System to 12c Release 1 (12.1.1)

Preparing Your Machine for an Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Selecting an Upgrade Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Backing Up Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Performing a Simple Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Performing Additional Upgrade Steps to Windows Server . . . . . . . . . . . . . . . . . . . . . . 5-4

Upgrading from Tuxedo 6.5 to Tuxedo 12c Release 1 (12.1.1) . . . . . . . . . . . . . . . . . . . 5-5

Performing a Hot Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Pre-Upgrade Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Hot-Upgrade Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Hot-Upgrade Example. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Rebuilding an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

Installing Oracle Jolt 12c Release 1 (12.1.1) with Oracle WebLogic Server. . . . . . . . 5-10

6. Performing Post-Installation TasksUnderstanding the Oracle Tuxedo Directory Structure . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Understanding the Oracle Tuxedo Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

UBBCONFIG File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

MASTER Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

TUXCONFIG File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

TUXCONFIG Environment Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

TUXDIR Environment Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Using the Registry to Further Restrict Access on a Windows System. . . . . . . . . . . . . . 6-8

Installing the Oracle Tuxedo System v

Setting Up Your Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Setting Environment Variables on a Windows System. . . . . . . . . . . . . . . . . . . . . 6-11

Setting Environment Variables on a UNIX System . . . . . . . . . . . . . . . . . . . . . . . 6-12

Starting the tlisten Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

tlisten Invocation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

tlisten Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

Editing a UBBCONFIG File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

Using the TYPE Parameter in UBBCONFIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18

Checking IPC Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18

Creating the Universal Device List and the Transaction Log . . . . . . . . . . . . . . . . . . . 6-19

Defining the TLOG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20

Creating the UDL and UDL Entries for TLOG . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20

Running simpapp to Verify Your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21

Running simpapp to Verify the Oracle Tuxedo ATMI Software Installation . . . . 6-22

Running simpapp to Verify the Oracle Tuxedo ATMI Software Installation on a Windows System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22

Running simpapp to Verify the Oracle Tuxedo ATMI Software Installation on a UNIX System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-25

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software Installation . . 6-27

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software Installation on a Windows System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software Installation on a UNIX System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-29

Running buildtms for Oracle Tuxedo Applications That Use XA Resource Managers6-31

Uninstalling Oracle Tuxedo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-31

Reinstalling Oracle Tuxedo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-32

vi Installing the Oracle Tuxedo System

A. Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data SheetsSupported Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-3

Platform Support Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-5

Platform End of Life Expectancy Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-6

Tunable Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-8

Supported Platform Data Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-8

HP-UX 11i v3 (32-bit) on Itanium 64-bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-8

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for HP-UX 11i v3 (32-bit) on Itanium 64-bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-8

Hardware Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bit . . . . . .A-9

Software Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bit . . . . . .A-9

Network Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bit. . . . . .A-10

Disk Space Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bit. . . .A-10

Tunable Parameters for HP-UX 11i v3 (32-bit) on Itanium 64-bit . . . . . . . .A-10

HP-UX 11i v3 (64-bit) on Itanium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-10

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for HP-UX 11i v3 (64-bit) on Itanium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-10

Hardware Requirements for HP-UX 11i v3 (64-bit) on Itanium . . . . . . . . . . A-11

Software Requirements for HP-UX 11i v3 (64-bit) on Itanium. . . . . . . . . . . A-11

Network Requirements for HP-UX 11i v3 (64-bit) on Itanium . . . . . . . . . . .A-12

Disk Space Requirements for HP-UX 11i v3 (64-bit) on Itanium . . . . . . . . .A-12

Tunable Parameters for HP-UX 11i v3 (64-bit) on Itanium. . . . . . . . . . . . . .A-12

IBM AIX 6.1 (64-bit) on IBM PowerPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-13

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for IBM AIX 6.1 (64-bit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-13

Hardware Requirements for IBM AIX 6.1 (64-bit) . . . . . . . . . . . . . . . . . . . .A-13

Software Requirements for IBM AIX 6.1 (64-bit). . . . . . . . . . . . . . . . . . . . .A-13

Network Requirements for IBM AIX 6.1 (64-bit) . . . . . . . . . . . . . . . . . . . . .A-15

Installing the Oracle Tuxedo System vii

Disk Space Requirements for IBM AIX 6.1 (64-bit). . . . . . . . . . . . . . . . . . . A-16

Tunable Parameters for IBM AIX 6.1 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . A-16

IBM AIX 7.1 (64-bit) on IBM PowerPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for IBM AIX 7.1 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

Hardware Requirements for IBM AIX 7.1 (64-bit) . . . . . . . . . . . . . . . . . . . . A-16

Software Requirements for IBM AIX 7.1 (64-bit) . . . . . . . . . . . . . . . . . . . . A-17

Network Requirements for IBM AIX 7.1 (64-bit). . . . . . . . . . . . . . . . . . . . . A-19

Disk Space Requirements for IBM AIX 7.1 (64-bit). . . . . . . . . . . . . . . . . . . A-19

Tunable Parameters for IBM AIX 7.1 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . A-19

Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-19

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2008 R2 Server (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-19

Hardware Requirements for Windows R2 2008 Server (64-bit) . . . . . . . . . . A-20

Software Requirements for Windows R2 2008 Server (64-bit). . . . . . . . . . . A-20

Network Requirements for Windows R2 2008 Server (64-bit) . . . . . . . . . . . A-22

Disk Space Requirements for Windows R2 2008 Server (64-bit) . . . . . . . . . A-22

Tunable Parameters for Windows R2 2008 Server (64-bit). . . . . . . . . . . . . . A-22

Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-22

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2008 R2 Server (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-22

Hardware Requirements for Windows R2 2008 Server (64-bit) . . . . . . . . . . A-23

Software Requirements for Windows R2 2008 Server (64-bit). . . . . . . . . . . A-23

Network Requirements for Windows R2 2008 Server (64-bit) . . . . . . . . . . . A-25

Disk Space Requirements for Windows R2 2008 Server (64-bit) . . . . . . . . . A-25

Tunable Parameters for Windows R2 2008 Server (64-bit). . . . . . . . . . . . . . A-25

viii Installing the Oracle Tuxedo System

Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-25

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2012 Server (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-25

Hardware Requirements for Windows 2012 Server (64-bit) . . . . . . . . . . . . .A-26

Software Requirements for Windows 2012 Server (64-bit). . . . . . . . . . . . . .A-26

Network Requirements for Windows 2012 Server (64-bit) . . . . . . . . . . . . . .A-27

Disk Space Requirements for Windows 2012 Server (64-bit) . . . . . . . . . . . .A-27

Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-27

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2012 Server (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-28

Hardware Requirements for Windows 2012 Server (64-bit) . . . . . . . . . . . . .A-28

Software Requirements for Windows 2012 Server (64-bit). . . . . . . . . . . . . .A-28

Network Requirements for Windows 2012 Server (64-bit) . . . . . . . . . . . . . .A-29

Disk Space Requirements for Windows 2012 Server (64-bit) . . . . . . . . . . . .A-30

Microsoft Windows 7 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2010 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-30

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 7 (64-bit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-30

Hardware Requirements for Windows 7 (64-bit) . . . . . . . . . . . . . . . . . . . . . .A-30

Software Requirements for Windows 7 (64-bit) . . . . . . . . . . . . . . . . . . . . . .A-30

Network Requirements for Windows 7 (64-bit). . . . . . . . . . . . . . . . . . . . . . .A-32

Disk Space Requirements for Windows 7 (64-bit). . . . . . . . . . . . . . . . . . . . .A-32

Microsoft Windows 7 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2012 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-32

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 7 (64-bit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-33

Installing the Oracle Tuxedo System ix

Hardware Requirements for Windows 7 (64-bit) . . . . . . . . . . . . . . . . . . . . . A-33

Software Requirements for Windows 7 (64-bit) . . . . . . . . . . . . . . . . . . . . . . A-33

Network Requirements for Windows 7 (64-bit) . . . . . . . . . . . . . . . . . . . . . . A-35

Disk Space Requirements for Windows 7 (64-bit) . . . . . . . . . . . . . . . . . . . . A-35

Microsoft Windows 7 (32-bit) (Client Only) on x86 with MS Visual Studio 2010A-35

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 7 (32-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-35





Microsoft Windows 8 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2010 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-38






Microsoft Windows 8 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2012 Professional Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-40






Novell SUSE Linux Enterprise Server 11 (64-bit) on x86-64 . . . . . . . . . . . . . . . A-43

x Installing the Oracle Tuxedo System

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Novell SUSE Linux Enterprise Server 11 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-43

Hardware Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit) . .A-43

Software Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit) . .A-44

Network Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit) . . .A-45

Disk Space Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit).A-45

Tunable Parameters for Novell SUSE Linux Enterprise Server 11 (64-bit) .A-45

Oracle Linux 5.6 (32-bit) on x86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-45

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Linux 5.6 (32-bit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-45

Hardware Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . .A-45

Software Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . . .A-46

Network Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . . .A-47

Disk Space Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . .A-47

Tunable Parameters for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . . . . . .A-47

Oracle Linux 5.4 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-47







Oracle Linux 5.6 (32-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-49

Installing the Oracle Tuxedo System xi

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-49

Hardware Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . . A-50

Software Requirements for Oracle Linux 5.6 (32-bit). . . . . . . . . . . . . . . . . . A-50

Network Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . . . A-51

Disk Space Requirements for Oracle Linux 5.6 (32-bit) . . . . . . . . . . . . . . . . A-51

Tunable Parameters for Oracle Linux 5.6 (32-bit). . . . . . . . . . . . . . . . . . . . . A-51

Oracle Linux 5.6 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-51







Oracle Linux 6.0 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-53

Available Oracle Tuxedo 12c (12.1.1.0) Install Sets for Oracle Linux 6.0 (64-bit)A-54

Hardware Requirements for Oracle Linux 6.0 (64-bit) x86-64 . . . . . . . . . . . A-54





Oracle Linux 5.6 (64-bit) on Exalogic 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-55




xii Installing the Oracle Tuxedo System




Oracle Linux 5.8 (64-bit) on Exalogic 2.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-58







Oracle Solaris 10 (64-bit) on x86-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-60

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 10 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-60

Hardware Requirements for Oracle Solaris10 (64-bit) on x86-64 . . . . . . . .A-61

Software Requirements for Oracle Solaris10 (64-bit) . . . . . . . . . . . . . . . . . .A-61

Network Requirements for Oracle Solaris10 (64-bit) on x86-64. . . . . . . . . .A-62

Disk Space Requirements for Oracle Solaris10 (64-bit) on x86-64. . . . . . . .A-63

Tunable Parameters for Oracle Solaris10 (64-bit) on x86-64 . . . . . . . . . . . .A-63

Oracle Solaris 10 (32-bit) on SPARC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-63

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 10 (32-bit) on SPARC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-63

Hardware Requirements for Oracle Solaris 10 (32-bit) on SPARC . . . . . . . .A-63

Software Requirements for Oracle Solaris 10 (32-bit) on SPARC . . . . . . . .A-64

Network Requirements for Oracle Solaris 10 (32-bit) on SPARC. . . . . . . . .A-65

Disk Space Requirements for Oracle Solaris 10 (32-bit) on SPARC. . . . . . .A-65

Tunable Parameters for Oracle Solaris 10 (32-bit) on SPARC . . . . . . . . . . .A-65

Oracle Solaris 10 (64-bit) on SPARC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-65

Installing the Oracle Tuxedo System xiii

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 10 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-66

Hardware Requirements for Oracle Solaris 10 (64-bit) on SPARC. . . . . . . . A-66

Software Requirements for Oracle Solaris 10 (64-bit) on SPARC . . . . . . . . A-66

Network Requirements for Oracle Solaris 10 (64-bit) on SPARC . . . . . . . . A-68

Disk Space Requirements for Oracle Solaris 10 (64-bit) on SPARC . . . . . . A-68

Tunable Parameters for Oracle Solaris 10 (64-bit) on SPARC . . . . . . . . . . . A-68

Oracle Solaris 11 (64-bit) on x86-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-68

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 11 (64-bit) on x86-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-68

Hardware Requirements for Oracle Solaris11 (64-bit) on x86-64 . . . . . . . . A-69

Software Requirements for Oracle Solaris11 (64-bit) . . . . . . . . . . . . . . . . . . A-69

Network Requirements for Oracle Solaris11 (64-bit) on x86-64 . . . . . . . . . A-71

Disk Space Requirements for Oracle Solaris11 (64-bit) on x86-64 . . . . . . . A-71

Tunable Parameters for Oracle Solaris11 (64-bit) on x86-64 . . . . . . . . . . . . A-71

Oracle Solaris 11 Express (64-bit) on x86-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . A-71

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Solaris11 Express (64-bit) on x86-64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-71

Hardware Requirements for Solaris11 Express (64-bit) on x86-64. . . . . . . . A-72

Software Requirements for Solaris11 Express (64-bit) . . . . . . . . . . . . . . . . . A-72

Network Requirements for Solaris11 Express (64-bit) on x86-64 . . . . . . . . A-74

Disk Space Requirements for Solaris11 Express (64-bit) on x86-64 . . . . . . A-74

Tunable Parameters for Solaris11 Express (64-bit) on x86-64 . . . . . . . . . . . A-74

Oracle Solaris 11 (64-bit) on SPARC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-74

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 11 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-74

Hardware Requirements for Oracle Solaris 11 (64-bit) on SPARC. . . . . . . . A-75

Software Requirements for Oracle Solaris 11 (64-bit) on SPARC . . . . . . . . A-75

xiv Installing the Oracle Tuxedo System

Network Requirements for Oracle Solaris 11 (64-bit) on SPARC. . . . . . . . .A-76

Disk Space Requirements for Oracle Solaris 11 (64-bit) on SPARC. . . . . . .A-76

Tunable Parameters for Oracle Solaris 11 (64-bit) on SPARC . . . . . . . . . . .A-76

Red Hat Enterprise Linux 5.6 (32-bit) on x86. . . . . . . . . . . . . . . . . . . . . . . . . . . .A-77

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Red Hat Enterprise Linux 5.6 (32-bit). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-77

Hardware Requirements for Red Hat Enterprise Linux 5.6 (32-bit) . . . . . . .A-77

Software Requirements for Red Hat Enterprise Linux 5.6 (32-bit) . . . . . . . .A-77

Network Requirements for Red Hat Enterprise Linux 5.6 (32-bit) . . . . . . . .A-78

Disk Space Requirements for Red Hat Enterprise Linux 5.6 (32-bit) . . . . . .A-79

Tunable Parameters for Red Hat Enterprise Linux 5.6 (32-bit) . . . . . . . . . . .A-79

Red Hat Enterprise Linux 5.4 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . .A-79















Installing the Oracle Tuxedo System xv

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Red Hat Enterprise Linux 5.6 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-83

Hardware Requirements for Red Hat Enterprise Linux 5.6 (64-bit) . . . . . . . A-83

Software Requirements for Red Hat Enterprise Linux 5.6 (64-bit). . . . . . . . A-84

Network Requirements for Red Hat Enterprise Linux 5.6 (64-bit) . . . . . . . . A-85

Disk Space Requirements for Red Hat Enterprise Linux 5.6 (64-bit) . . . . . . A-85

Tunable Parameters for Red Hat Enterprise Linux 5.6 (64-bit). . . . . . . . . . . A-85

Red Hat Enterprise Linux 5.8 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . A-85







Red Hat Enterprise Linux 6.0 (64-bit) on x86-64 . . . . . . . . . . . . . . . . . . . . . . . . . A-87

Available Oracle Tuxedo 12c (12.1.1.0) Install Sets for Red Hat Enterprise Linux 6.0 (64-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-87






Red Hat Enterprise Linux 6.3 (64-bit) on s390x. . . . . . . . . . . . . . . . . . . . . . . . . . A-89




xvi Installing the Oracle Tuxedo System




1. Starting the Oracle Tuxedo Administration ConsoleWhat is the Oracle Tuxedo Administration Console? . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Administration Console File Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Server Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Browser Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Setting Up Your Environment for the Oracle Tuxedo Administration Console . . . . . . B-6

Starting tuxwsvr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Starting wlisten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7

Starting the Oracle Tuxedo Administration Console . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

Limitation(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-9

Exiting the Oracle Tuxedo Administration Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . B-9

B. Oracle Jolt 12c Release 1 (12.1.1) Overview and Installation Information

About Oracle Jolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Oracle Jolt Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3

Jolt Server Listener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4

Jolt Server Handler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5

Jolt Repository Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5

Jolt Repository. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5

Jolt Internet Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5

Jolt Class Library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-6

JoltBeans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8

Installing the Oracle Tuxedo System xvii

Oracle Jolt Client Personalities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8

Oracle Jolt Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-9

Oracle Jolt Client Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10

Oracle Jolt Client Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11

Oracle Jolt Client Class Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11

Oracle Jolt Release Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12

Oracle Jolt Pre-Installation Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12

Oracle Jolt Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12

D. File and Database Management and Disk Space AllocationIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1

How the Oracle Tuxedo System Manages Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1

Arranging for Raw Disk Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2

How the Oracle Tuxedo Filesystem Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2

Space for Queue Spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4

Space for Application Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4

E. IPC Resource Configuration on a UNIX SystemParameter Sets Controlling IPC Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1

Shared Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2

Semaphores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3

Message Queues and Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4

What Is Application Deadlock? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-5

Performance Implications of Blocking Conditions. . . . . . . . . . . . . . . . . . . . . . . . . E-5

Tunable Message Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-5

Other Kernel Tunables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-7

xviii Installing the Oracle Tuxedo System

C H A P T E R 1

Preparing to Install the Oracle Tuxedo System

The following sections provide information that you need to know before installing the Oracle Tuxedo 12c Release 1 (12.1.1) product software:

Oracle Tuxedo Web Distribution

Oracle Tuxedo Software Components

LLE and SSL Levels of Encryption

Hardware and Software Prerequisites

Interprocess Communication Resources Configuration

Oracle Installation Program

Oracle Home Directory

Installation Road Map

Oracle Tuxedo Web DistributionAn evaluation copy of Oracle Tuxedo is available for download from the Oracle corporate Web site at http://www.oracle.com/technology/software/index.html.

Platform-specific installer files for the Oracle Tuxedo product software are available for download from the Oracle corporate Web site.

Installing the OracleTuxedo System 1-1

http://www.oracle.com/technology/software/index.html

Oracle Tuxedo Software ComponentsIncluded with the Oracle Tuxedo 12c Release 1 (12.1.1) software distribution is the Oracle Jolt product software, which enables Java clients to call Oracle Tuxedo services, and the Oracle SNMP Agent product software, which enables Oracle Tuxedo applications to be managed from a centralized enterprise management console.

The Oracle Tuxedo 12c Release 1 (12.1.1) distribution contains the following components:

Server components:

– Oracle Application-to-Transaction Monitor Interface (ATMI) server software

– Oracle Common Object Request Broker Architecture (CORBA) C++ server software

– Oracle Jolt 12c Release 1 (12.1.1) server software

– Oracle SNMP Agent 12c Release 1 (12.1.1) software

– Oracle Tuxedo Administration Console software

– Link-Level Encryption (LLE) and Secure Sockets Layer (SSL) encryption software

Client components:

– Oracle ATMI Workstation (/WS) client software

– Oracle CORBA C++ client software—includes the C++ client Object Request Broker (ORB) and the environmental objects

– Oracle Jolt 12c Release 1 (12.1.1) client software

– Tuxedo.NET Workstation client software

– LLE and SSL encryption software

Figure 1-1 illustrates a high-level view of the Oracle Tuxedo client and server components.

1-2 Installing the OracleTuxedo System

Orac le Tuxedo So f tware Components

Figure 1-1 Oracle Tuxedo Client and Server Components

Oracle Tuxedo 12cR1 Architecture

ATMI Clients(Workstation—/WS)

CORBA C++Clients

Tuxedo Client Components

ATMI ServerApplications

CORBA C++Client Software

JoltClient Software

Jolt ATMI CORBA C++ ORB

.NETClient Software

.NET Wrapper

Tuxedo Server Components

Jolt (Java)Clients

ATMI Programming Personality CORBA Programming Personality

WSL/WSH ISL/ISHJSL/JSH

CORBA OTM& Tuxedo Infrastructure

ATMI Transaction Processor& Tuxedo Infrastructure

CORBA C++ ServerApplications

ATMIClient Software

ATMI

ATMI,

.NETClients

LLE/SSLATMI,

LLE/SSLJOLT,

LLE/SSLIIOP,

IIOPS


For descriptions of terms such as remote client, native client, LLE, and SSL, see “Client and Server Components” in Oracle Tuxedo Product Overview.

Tuxedo .NET Workstation ClientThe Tuxedo .NET Workstation Client requires:

the ATMI Client to be automatically installed when you select the .NET Client install set.

A correct version of Microsoft’s .NET Framework installed on your system. If .NET Framework is not detected, you can continue the .NET Client installation and install.NET Framework later. For more information on the Tuxedo.Net Workstation Client, see Creating Tuxedo.NET Workstation Client Applications.

LLE and SSL Levels of EncryptionLLE and SSL are available with two levels of encryption: 56-bit and 128/256-bit.

Hardware and Software PrerequisitesThe Oracle Tuxedo software must be installed on each server machine that will participate in a Oracle Tuxedo application, also known as a Tuxedo domain. A Tuxedo application is a business software program, built upon the Tuxedo system, that is defined and controlled by a single configuration file known as the UBBCONFIG file. The Tuxedo configuration file is described in reference page UBBCONFIG(5) in Oracle Tuxedo File Formats, Data Descriptions, MIBs, and System Processes Reference.

A Tuxedo application consists of many Tuxedo system processes, one or more application client processes, one or more application server processes, and one or more computer machines connected over a network. In a multi-machine Tuxedo application running different releases of the Oracle Tuxedo software, the master machine—designated via the MASTER parameter in the RESOURCES section of the UBBCONFIG file—must run the highest release of the Oracle Tuxedo software in the application. For more information about Tuxedo applications, see “Domains” in Oracle Tuxedo Product Overview.

Note: Oracle advises against trying to share the Oracle Tuxedo system executables across remote filesystems; this practice has proven to be unreliable in the past.


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/dotnet/dotnet_chapter.html


Hardware and So f tware Pre requ is i t es

System RequirementsThe system requirements for Oracle Tuxedo 12c Release 1 (12.1.1) are given in Table 1-1.

For Oracle Jolt installation preparatory information, see “Oracle Jolt 12c Release 1 (12.1.1) Overview and Installation Information” on page B-1. No installation preparation is required for Oracle SNMP Agent.

Note: Before installing Oracle Tuxedo software on a UNIX system, Oracle recommends that you repartition your hard disk device in accordance to “File and Database Management and Disk Space Allocation” on page D-1.

Temporary Storage Space RequirementsThe Oracle Installation program uses a temporary directory in which it extracts the files from the archive that are needed to install Oracle Tuxedo on the target system. During the installation process, your temporary directory must contain sufficient space to accommodate the compressed Java Runtime Environment (JRE) bundled with the installer and an uncompressed copy of the JRE that is expanded into the temporary directory. The installation program moves the JRE from the temporary directory to the Oracle Home directory at the end of the installation process. For information about the Oracle Home directory, see “Oracle Home Directory” on page 1-10.

The amount of temporary storage space needed depends upon the target platform, as stated in the data sheets in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

Table 1-1 The System Requirements for Oracle Tuxedo 12c Release 1 (12.1.1)

Component Requirement

Platform* Any platform identified in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

Hard disk drive As stated in the data sheet for the target platform in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. For additional information about disk space requirements, see “File and Database Management and Disk Space Allocation” on page D-1.

Memory As stated in the data sheet for the target platform in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

* Microsoft Windows XP systems support only the Oracle Tuxedo client components.


By default, the installation program uses the temporary directories shown in Table 1-2.

To ensure there is adequate temporary space, you may want to allocate an alternate directory for use as a temporary directory for the installation. To do so, perform the appropriate step in Table 1-3 and clean up files as more as possible in the temporary directory before starting the Oracle Installation program.

Interprocess Communication Resources ConfigurationInterprocess communication (IPC) is a capability supported by the Windows and UNIX operating systems that allows one process to communicate with another process. The processes can be running on the same computer or on different computers connected through a network.

On a Windows 2003 Server system, the Oracle Tuxedo system provides an IPC service called the Oracle ProcMGR (Process Manager), which facilitates interprocess communications. You use the Oracle ProcMGR service to adjust the IPC parameters and maximize the performance of a Oracle Tuxedo application.

On a UNIX system, you use methods native to the UNIX system to adjust the IPC parameters and maximize the performance of a Oracle Tuxedo application. Since most UNIX systems are shipped with default values that are too low for a Oracle Tuxedo application, you need to adjust

Table 1-2 Temporary Directories

Platform Directory

Windows Directory referenced by the TMP system variable

UNIX /tmp

Table 1-3 Perform This Step

On This Platform... Perform This Step...

Windows Set the TMP system variable to a directory of your choice.

UNIX Enter the following command at the shell prompt:export IATEMPDIR=tmpdirname

Replace tmpdirname with the name of a temporary directory of your choice.


Orac le Ins ta l la t i on P rogram

the IPC parameters, using the methods given in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. For the recommended IPC values, see “IPC Resource Configuration on a UNIX System” on page E-1.

After installing the Oracle Tuxedo software and creating an application configuration file (UBBCONFIG file), you use the tmloadcf(1) command to calculate and print a list of the minimum IPC resources needed to support the application. If your Oracle Tuxedo application is distributed, the minimum IPC resources must be available on every machine participating in the application. For more information about calculating IPC resources using the tmloadcf(1) command, see “Performing Post-Installation Tasks” on page 6-1.

Note: Before installing Oracle Tuxedo software on a UNIX system, Oracle recommends that you adjust the IPC parameters on the target machine in accordance to “IPC Resource Configuration on a UNIX System” on page E-1.

Oracle Installation ProgramThe Oracle Tuxedo software is distributed as an installer file, which also contains a copy of the Oracle Installation program. The Oracle Installation program is the Oracle standard tool for installing the Oracle Tuxedo software on Windows or UNIX systems.

Note: On Windows platforms you must re-login to the system after Tuxedo 12c Release 1 (12.1.1) installation has completed.

Previous Tuxedo VersionsIf a previous version of the Tuxedo software is detected during GUI mode and silent installation on a Windows system, the Tuxedo installer will automatically stop the following previous Tuxedo version ProcMGR and Listener services:

Oracle ProcMGR V2.2

Oracle ProcMGR V8.0

Oracle ProcMGR V8.1

Oracle ProcMGR V9.0

Oracle ProcMGR V9.1

Oracle ProcMGR V9.1with VS2005 v2

Oracle ProcMGR V10.0 with VS2005


Tuxedo 10.0 with VS2005 Listener on Port 3050

Tuxedo 9.1 Listener on Port 3050

Tuxedo 9.1with VS2005 Listener on Port 3050





Tuxedo 6.5 Tuxedo IPC Helper

Note: During GUI installation, users will be prompted with the following message: “Stopping Previous Version Tuxedo Services”

Listener services configured on ports other than 3050 must be stopped manually.

The current Tuxedo distribution requires these services to be stopped in order to run multiple Tuxedo versions on the same machine. The time required for stopping the ProcMGR services is minimal; however, the time required to stop the listener services may take a few minutes.

Installation MethodsThe Oracle Installation program supports three installation methods. You can use any of these methods to install the Oracle Tuxedo product software:

Graphical user interface (GUI) installation, described in “Installing Oracle Tuxedo Using GUI-Mode Installation” on page 2-1.

Console Installation (UNIX systems only), described in “Installing Oracle Tuxedo on UNIX Systems Using Console-Mode Installation” on page 3-1.

Silent installation, described in “Installing Oracle Tuxedo Using Silent Installation” on page 4-1.

Cancelling InstallationClicking the “Cancel” or the “close’ window button in GUI mode, or typing “quit” in console mode creates an incomplete Tuxedo 12c Release 1 (12.1.1) installation. You will have to re-install Tuxedo 12c Release 1 (12.1.1).


Orac le Ins ta l la t i on P rogram

If you installed Tuxedo 12c Release 1 (12.1.1) in a previous Tuxedo product directory, and you want to return to your original configuration, you must re-install your previous Tuxedo version.

Install SetsAn install set is a bundle of product software components related by function. Oracle Tuxedo 12c Release 1 (12.1.1) offers the following seven install sets:

Full install set—consists of all the Oracle Tuxedo 12c Release 1 (12.1.1) server and client components

Server install set—consists of all the Oracle Tuxedo 12c Release 1 (12.1.1) server components:

– Oracle Application-to-Transaction Monitor Interface (ATMI) server, native ATMI client, and ATMI Workstation (/WS) software

– Oracle Common Object Request Broker Architecture (CORBA) C++ server

– Oracle Jolt 12c Release 1 (12.1.1) server software including Oracle Jolt Internet Relay

– Oracle SNMP Agent 12c Release 1 (12.1.1) software

– Oracle Tuxedo Administration Console software

– Link-Level Encryption (LLE) and Secure Sockets Layer (SSL) encryption software

Full client install set—consists of all the Oracle Tuxedo 12c Release 1 (12.1.1) client components:

– Oracle ATMI Workstation (/WS) client software

– Oracle CORBA C++ client software (C++ client Object Request Broker, or ORB) including environmental objects


– Oracle Tuxedo.NET Workstation client software


ATMI (/WS) client install set—consists of the following Oracle Tuxedo 12c Release 1 (12.1.1) components:

– Oracle ATMI (/WS) client software



CORBA client install set—consists of the following Oracle Tuxedo 12c Release 1 (12.1.1) components:

– Oracle CORBA C++ client software

– SSL encryption software

Jolt client install set—consists of the following Oracle Tuxedo 12c Release 1 (12.1.1) components:



.NET client install set—consists of the following Oracle Tuxedo 12c Release 1 (12.1.1) components and install sets: (Windows platforms only)

– Tuxedo.NET Workstation client software

– Oracle ATMI (/WS) client install set

In addition to selecting an install set during a Oracle Tuxedo 12c Release 1 (12.1.1) installation, a user can further customize the installation by selecting (adding) or deselecting (deleting) one or more software components from the install set. Customizing is only possible for GUI-mode and console-mode installation methods described in “Installing Oracle Tuxedo Using GUI-Mode Installation” on page 2-1 and “Installing Oracle Tuxedo on UNIX Systems Using Console-Mode Installation” on page 3-1; it is not possible for silent-mode installation method.

Oracle Home DirectoryWhen you install Oracle Tuxedo, you are prompted to specify an Oracle Home directory. The Oracle Home directory is a repository for common files that are used by multiple Oracle products installed on the same machine. For this reason, the Oracle Home directory can be considered a “central support directory” for the Oracle products installed on your system.

The files in the Oracle Home directory are essential to ensuring that the Oracle software operates correctly on your system. These files perform the following types of functions:

Facilitate checking of cross-product dependencies during installation

Facilitate service pack installation

The structure of the Oracle Home directory created by the Oracle Tuxedo 12c Release 1 (12.1.1) installer program is shown in the following illustration.


Orac le Home D i rec to r y

Choosing a Oracle Home DirectoryDuring the installation of Oracle Tuxedo 12c Release 1 (12.1.1), you are prompted to choose an existing Oracle Home directory or specify a path for a new Oracle Home directory. If you choose to create a new directory, the Oracle Tuxedo installer program automatically creates the directory for you.

Upon choosing a Oracle Home directory, you are prompted to choose a Oracle product directory for your Oracle Tuxedo installation. You may choose to create your Oracle product directory under the Oracle Home directory, but there is no requirement to do so.

Understanding the Functions of the Oracle Home DirectoryThe files and directories in an Oracle Home directory created by the Oracle Tuxedo installer are described in Table 1-4.

Table 1-4 Description

Component Description

registry.xml file An XML registry file that contains a persistent record of all Oracle products installed on the target system for this Oracle Home directory. The registry contains product-related information, such as version level, service pack level, and product installation directory.

logs directory A directory containing a Oracle Home location file and a history file of installation and uninstallation for this Oracle Home directory. For more information on these files, see the “Understanding the Oracle Tuxedo Shortcuts on a Windows System” on page 2-11.

logs (dir)

Oracle Home (dir)registry.xml


Creating More Than One Oracle Home DirectoryAlthough it is possible to create more than one Oracle Home directory, Oracle recommends that you avoid doing so. In almost all situations, a single Oracle Home directory is sufficient. There may be circumstances, however, in which you prefer to maintain separate development and production environments, each containing a separate product stack. With two directories, you can update your development environment (in an Oracle Home directory) without modifying the production environment until you are ready to do so.

Installation Road MapYou are now ready to begin your installation. To install Oracle Tuxedo 12c Release 1 (12.1.1), see one of the following sections:

“Installing Oracle Tuxedo Using GUI-Mode Installation” on page 2-1

“Installing Oracle Tuxedo on UNIX Systems Using Console-Mode Installation” on page 3-1

“Installing Oracle Tuxedo Using Silent Installation” on page 4-1

If you are upgrading from Oracle WebLogic Enterprise or Oracle Tuxedo 9.1 or earlier software, see “Upgrading the Oracle Tuxedo System to 12c Release 1 (12.1.1)” on page 5-1.

If you want to uninstall your Oracle Tuxedo software, see “Performing Post-Installation Tasks” on page 6-1.


C H A P T E R 2

Installing Oracle Tuxedo Using GUI-Mode Installation

The following sections describe how to install Oracle Tuxedo using graphical user interface (GUI) mode installation on both Windows and UNIX systems:

What Is GUI-Mode Installation?

Before You Start

Starting GUI-Mode Installation on a Windows System

Starting GUI-Mode Installation on a UNIX System

Running GUI-Mode Installation

Assigning File Ownership on a UNIX System

Understanding the Oracle Tuxedo Shortcuts on a Windows System

Understanding the Oracle Administration Program on a Windows System

Reviewing the Windows Server Registry Content

What Do I Do Next?

Installing the Oracle Tuxedo System 2-1

What Is GUI-Mode Installation?The graphical user interface mode installation is the graphics-based method of executing the Oracle Installation program. It can be run on both Windows and UNIX system.

To run GUI-mode installation, the console attached to the machine on which you are installing the software must support a Java-based GUI. All consoles for Windows systems support Java-based GUIs, but not all consoles for UNIX systems do.

Note: To install Oracle Tuxedo on a UNIX system with a non-graphics console, see“Installing Oracle Tuxedo on UNIX Systems Using Console-Mode Installation” on page 3-1.

Before You StartIf you are upgrading from Oracle WebLogic Enterprise or Oracle Tuxedo 9.1 or earlier software, see “Upgrading the Oracle Tuxedo System to 12c Release 1 (12.1.1)” on page 5-1 and follow the instructions given there. Then return here to continue your Oracle Tuxedo installation.

On a Windows machine that has the Oracle WebLogic Enterprise software or an older version of the Oracle Tuxedo software installed, a window named “Previous Version Detected!” will display at the very beginning of the Oracle Tuxedo installation. This window contains a message that encourages you to exit the installation program and remove the older software before installing Oracle Tuxedo 12c Release 1 (12.1.1).

If you choose to remove the older software, refer to “Upgrading the Oracle Tuxedo System to 12c Release 1 (12.1.1)” on page 5-1, follow the instructions to remove the older software from your machine, and then restart the installation.

If you choose not to remove the older software, install the Oracle Tuxedo 12c Release 1 (12.1.1) software to a different product directory than the product directory where the Oracle WebLogic Enterprise software or the older version of the Oracle Tuxedo software is installed. See also “Previous Tuxedo Versions” on page 1-7

Starting GUI-Mode Installation on a Windows SystemTo start the GUI-mode installation process on a Windows system, follow these steps:

1. Select a Windows system that meets the hardware and software requirements described in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

The Windows XP systems support only Oracle Tuxedo client components.

2-2 Installing the Oracle Tuxedo System

Star t ing GUI-Mode Insta l la t i on on a UNIX Sys tem

2. Log in to the Windows system as the Administrator or as a member of the Administrator group.

You need administrative privileges to install Oracle Tuxedo server components on a Windows system. If you are going to install only Oracle Tuxedo client components, you do not need administrative privileges.

3. Ensure that you have enough free space for the Oracle Tuxedo installation.

For disk space requirements, see “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. For important disk space allocation information, see“File and Database Management and Disk Space Allocation” on page D-1.

4. Install Oracle Tuxedo by downloading from the Oracle Web site:

a. Go to http://www.oracle.com/technology/software/index.html and download the Oracle Tuxedo 12c Release 1 (12.1.1) installation file specific to your platform.

b. Go to the directory where you downloaded the Oracle Tuxedo installer and double-click the installer filename to start the installation.

5. Proceed to “Running GUI-Mode Installation” on page 2-4.

6. Re-login to the system after Tuxedo 12c Release 1 (12.1.1) installation has completed.

Starting GUI-Mode Installation on a UNIX SystemTo start the GUI-mode installation process on a UNIX system, follow these steps:

1. Select a UNIX system that meets the hardware and software requirements described in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1

2. Log in to the UNIX system as the Oracle Tuxedo administrator.


For disk space requirements, see “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. For important disk space allocation information, see “File and Database Management and Disk Space Allocation” on page D-1






b. Go to the directory where you downloaded the installer and invoke the installation procedure by entering the following command:

prompt> sh filename.bin

where filename is the name of the Oracle Tuxedo installer file.

Note: GUI mode is the default for Tuxedo 12c Release 1 (12.1.1) installation. If a GUI interface is not available on your Unix platform, you will receive an error message and the installation process is aborted.

If a GUI interface is not available on your Unix platform, you must use silent or console-mode installation. For more information, see What Is Silent Installation? and What Is Console-Mode Installation?

5. Proceed to “Running GUI-Mode Installation” on page 2-4.

Running GUI-Mode InstallationThe Oracle Tuxedo installer program is currently available in English and Japanese. By checking the value of a certain language-related environment variable on the target platform, the installer program automatically determines (1) the language displayed during the installation and (2) the language-specific message catalog installed during the installation. If the language-related environment variable is not set or is set to a value unknown to the installer program, both the language displayed and the message catalog installed default to English.

The Oracle Tuxedo installer program prompts you to enter specific information about your system and configuration. For instructions on responding to the prompts during installation, see Table 2-1.


Running GUI-Mode Ins ta l la t ion


Table 2-1 Instructions

In This Window . . . Perform the Following Action . . .

Introduction Click Next to proceed with the installation. You may cancel the installation at any time by clicking Cancel.

Choose Install Set

(.NET Client Install set in not available on UNIX platforms)

Select the install set that you want installed on your system. The following seven choices are available:• Full Install (the default)—all Tuxedo server and client

software components• Server Install—Tuxedo server software components only• Full Client Install—Tuxedo client software components only• Jolt Client Install—Jolt client software components only• ATMI (/WS) Client Install—Tuxedo ATMI client software

components only• CORBA Client Install—Tuxedo CORBA client software

components only• .NET Client Install—Tuxedo .NET client software and ATMI

client components only. The .NET Client Install set installs the Tuxedo Workstation Client on your system. For more information on the Tuxedo .Net Workstation Client, see Creating Tuxedo .NET Workstation Client Applications in Using the Tuxedo .NET Workstation Client

• Custom Install—select specific Tuxedo server and client software components. The following table entry provides a summary of options for the Custom Install.

For a detailed list of software components for each install set, see “Install Sets” on page 1-9.

Note: A Windows XP system cannot be used as a Oracle Tuxedo server machine. On a Windows XP system, select Full Client Install, Jolt Client Install, ATMI Client Install, or CORBA Client Install from the installation menu.

Select an install set and then click Next to launch the Choose Oracle Home Directory window—your selection includes the appropriate encryption software for Link-Level Encryption (LLE) and/or Secure Sockets Layer (SSL). Or select an install set and then click Customize to launch the Customize Install window.





Customize Install Select (add) or deselect (clear) one or more software components from the selected install set, or choose one of the other five install sets or Custom Set from the drop-down list menu and customize its software components. For a description of the JRLY component, see “Jolt Internet Relay” on page B-5.

Observe the following software component mappings:• Server—contains ATMI server software; CORBA C++

server software; Oracle Jolt server software; Oracle SNMP Agent software, and Oracle Tuxedo Administration Console software

• ATMI Client—contains Oracle ATMI Workstation (/WS) client software

• CORBA Client—contains Oracle CORBA C++ client software (C++ client ORB) including environmental objects

• Jolt JRLY—contains Oracle Jolt Relay software• Jolt Client—contains Oracle Jolt client software• . NET Client—contains Oracle .Net client software

After selecting or deselecting one or more software components from the selected install set, click Next to continue with the installation. The appropriate encryption software for LLE and/or SSL is automatically included.

Choose Oracle Home Directory

Specify the Oracle Home directory that will serve as the central support directory for all Oracle products installed on the target system. If you already have a Oracle Home directory on your system, you can select that directory (recommended) or create a new Oracle Home directory. If you choose to create a new directory, the Oracle Tuxedo installer program automatically creates the directory for you. For details about the Oracle Home directory, see “Oracle Home Directory” on page 1-10.

Choose a Oracle Home directory and then click Next to continue with the installation.




Choose Product Directory

Specify the directory in which you want to install the Oracle Tuxedo software. You may select the default product directory (tuxedo12cR1_VS2005 Windows or tuxedo12cR1 UNIX) or create a new product directory. If you choose to create a new directory, the Oracle Tuxedo installer automatically creates the directory for you.

WARNING: Running a previous Tuxedo version in conjunction with Tuxedo 12c Release 1 (12.1.1) on a Windows system requires that the product directories for both versions do not have the same name.

Choose a product directory and then click Install to start the Oracle Tuxedo software installation.

Install Samples Click the check box to install samples.

Click Next to proceed with the installation.

Confirm .Net Client Installation

(Windows Platforms only)

Click Next to proceed with the installation.

Will only display if .NET Client set is selected and .Net Framework is not installed on your system.

Choose Shortcut Folder

(Windows Platforms only)

Specify where you want to place Tuxedo 12c Release 1 (12.1.1) shortcut icons.

Pre-Installation Summary

Review your installation selections. Clicking Previous allows you to modify installation selections. Otherwise click Install to continue.

Installing Tuxedo. . . No user input is required here. The installation program is installing Oracle Tuxedo in the user-specified product directory.

Note: It is normal for the installation progress bar to stop for several minutes, especially at the end. The Oracle Tuxedo installer is still working when this occurs.





Configure tlisten Service This window appears only if you have installed the Server Install set.

Set the tlisten port value.

Note: For Windows platforms, the default value is 3050. There is no default value for UNIX platforms.

Enter a tlisten password of your choice. Your password must be a string of alphanumeric characters in clear-text format that is no more than 80 characters in length. You use this password to log in to the Oracle Tuxedo Administration Console.

Note: Machines on the same domain must have the same tlisten password defined.

Oracle Tuxedo uses the tlisten password to protect the local machine from administrative requests and operations that are not authorized. Whenever administrative communications arrive on the local machine through tlisten(1) or wlisten(1) gateway processes, Oracle Tuxedo authenticates them by means of the tlisten password.

Enter and re-enter a tlisten password and then click Next to continue.

Tlisten Encryption Method

Specify the tlisten encryption method: LLE or SSL.

The default is LLE.

SSL Parameter Input If the SSL encryption method is chosen, you must enter Security Principal name, location, and password.

Choose Encryption Bit Specify tlisten minimum and maximum encryption bit. The default minimum value is 0. The default maximum value is 256.




Congratulations! Your installation of the Oracle Tuxedo software is complete!

Assigning File Ownership on a UNIX SystemIf you installed the Oracle Tuxedo software on a UNIX system, Oracle strongly recommends that you create a separate user account for the Oracle Tuxedo administrator and give ownership of the

SSL Installation Choice This window appears only if you have installed Server, ATMI and/or CORBA Client install set components.

Oracle Tuxedo provides a Lightweight Directory Access Protocol (LDAP) based certificate retrieval mechanism that supports certificate-based authentication when using SSL. The Oracle Tuxedo certificate retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.

Choose whether or not you want to install SSL support. If you intend to use SSL encryption in your application, select Yes and then click Next to launch the LDAP Configuration window. If you do not intend to use SSL encryption in your application, select No.

LDAP Configuration for SSL Support

Enter the following LDAP configuration information and then click Next to continue:• LDAP Service Name: Fully qualified domain name of the

LDAP server (for example, pcwiz.mydomain.com)• LDAP PortID: Port number through which the local machine

communicates with the LDAP server (for example, 389)• LDAP BaseObject: Distinguished name of the base object for

search in the LDAP server (for example, o=beasys.com)• LDAP Filter File Location: (tux_

prod_dir/udataobj/security/ bea_ldap_filter.dat by default, where tux_prod_dir represents the product directory in which you installed the Oracle Tuxedo software)

Install Complete Click Done to exit the installation program.




Unders tanding the Orac le Tuxedo Shor tcuts on a Windows Sys tem

Oracle Tuxedo files to that account. To change ownership of the Oracle Tuxedo software on a UNIX machine, enter the following command:

chown -R adm_account full_path_of_tux_prod_dir chgrp -R adm_group full_path_of_tux_prod_dir

Replace adm_account with the Oracle Tuxedo administrator account, replace adm_group with the Oracle Tuxedo administrator group ID, and replace full_path_of_tux_prod_dir with the full pathname of the product directory in which you installed the Oracle Tuxedo software.

Understanding the Oracle Tuxedo Shortcuts on a Windows System

When installing the Oracle Tuxedo software on a Windows system, the installer program automatically uses Oracle WebLogic E-Business Platform as the parent folder for Oracle Tuxedo. As additional Oracle Home directories are added to the system, the installer program continues to create new Oracle WebLogic E-Business Platform folders using the convention shown in Figure 2-1.

Figure 2-1 Tracking Multiple Oracle Home Directories on the Same Windows System

Each Oracle Home directory has an associated Oracle WebLogic E-Business Platform folder. Each Oracle WebLogic E-Business Platform folder contains one or more Oracle product folders (see note) and two files: OracleHOME Location and Install History.

Note: Because a Oracle Home directory may be the home directory for a Oracle Tuxedo installation, a Oracle WebLogic Server installation, or other Oracle product installations,

Oracle WebLogic E-Business Platform

Install HistoryOracleHOME LocationTuxedo 12cR1

Oracle WebLogic E-Business Platform (OracleHOME2)

Install HistoryOracleHOME LocationTuxedo 12cR1


an Oracle WebLogic E-Business Platform folder may contain multiple Oracle product folders.

For a given Oracle Home directory and Oracle WebLogic E-Business Platform folder, the ORACLEHOME file contains the pathname of the Oracle Home directory, and the View History file contains a history of installation and uninstallation for the Oracle Home directory. Double-clicking the text icon associated with either file displays its content. The ORACLEHOME and history files contain information extracted from the logs/log.txt file located in the Oracle Home directory.

The Tuxedo 12c Release 1 (12.1.1) folder (Start → Programs → Oracle WebLogic E-Business Platform → Tuxedo 12c Release 1 (12.1.1)) contains the following shortcuts:

Uninstall Tuxedo—choosing uninstall enables you to uninstall the Oracle Tuxedo 12c Release 1 (12.1.1) software. For more information about uninstalling Oracle Tuxedo, see “Uninstalling Oracle Tuxedo” on page 6-31.

Understanding the Oracle Administration Program on a Windows System

In addition to the Oracle Tuxedo Administration Console, the Oracle Tuxedo 12c Release 1 (12.1.1) software for Windows provides an Oracle Administration program and two Windows services (Tlisten and Oracle procMGR) for configuring the Oracle Tuxedo system on a Windows 2003 Server system. Only if the installation included Oracle Tuxedo server components will these additional administration tools be installed on the Windows 2003 Server system.

After you have installed or upgraded the Oracle Tuxedo software on your Windows 2003 Server system, you can use the Oracle Administration control panel (Start → Settings → Control Panel → Oracle Tuxedo 12c Release 1 (12.1.1) with VS2008 Administration) to perform the following tasks:

Access other machines on the network on which the Oracle Tuxedo system is installed

Set and modify environment variables for the Oracle Tuxedo system

Direct Oracle Tuxedo system messages to the Windows 2003 Server Event Log

Configure Oracle Tuxedo tlisten(1) processes to start automatically

Tune interprocess communication (IPC) resources to maximize Oracle Tuxedo system performance


Rev iew ing the Windows Se rve r Reg is t r y Content

For instructions on performing these tasks, see “Configuring Oracle Tuxedo ATMI for Windows Server 2003” in Using Oracle Tuxedo ATMI on Windows.

Reviewing the Windows Server Registry ContentThe Windows Server Registry is the repository for all hardware, software, and application configuration settings for the Windows system. During the Oracle Tuxedo installation, the installer program writes general installation information as well as IPC Resource values to the Registry. The structure of the Registry relevant to Oracle Tuxedo is as follows.

HKEY_LOCAL_MACHINE\Software\ORACLE\Tuxedo\<version>\...

Developer

Environment

Security

To view this structure, choose Start → Run to launch the Run dialog box, enter regEdt32, and click OK to launch the Registry Editor window.

Developer KeyThe Developer key stores product information, including the major and minor version numbers of the release, and user and company names.

Environment KeyThe Environment key stores the locations referenced by the Oracle Tuxedo environment variables set on your Windows system. It also stores other values such as IPC resource settings.

Security KeyThe Security key holds the access permissions for Oracle Tuxedo processes and services. The following permissions are mandatory:

Any user who runs tlisten(1) must have read access permissions.

The account under which the Oracle ProcMGR service is running must have read access permissions.

Oracle recommends that the Administrator have full control permissions.


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/nt/ntadmin.html

What Do I Do Next?To configure your Oracle Tuxedo software, verify that your software is installed correctly, or to uninstall Oracle Tuxedo software, see “Performing Post-Installation Tasks” on page 6-1.


C H A P T E R 3

Installing Oracle Tuxedo on UNIX Systems Using Console-Mode

Installation

The following sections describe how to install Oracle Tuxedo using console-mode installation:

What Is Console-Mode Installation?

Before You Start

Starting Console-Mode Installation

Running Console-Mode Installation

What Do I Do Next?


What Is Console-Mode Installation?Console-mode installation is the text-based method of executing the Oracle Installation program. It can be run only on UNIX systems and is intended for UNIX systems with non-graphics consoles. Console-mode installation offers the same capabilities as graphics-based installation


Starting Console-Mode InstallationTo start the console-mode installation process, follow these steps:

1. Select a UNIX system that meets the hardware and software requirements described in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.



For disk space requirements, see “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. For important disk space allocation information, see “File and Database Management and Disk Space Allocation” on page D-1.


a. Go to http://www.oracle.com/technology/software/index.html and download the Oracle Tuxedo 11g Release 1 (11.1.1.2.0) installation file specific to your platform.


prompt> sh filename.bin -i console

where filename is the name of the Oracle Tuxedo installer file.

5. Proceed to “Running Console-Mode Installation” on page 3-3.



Running Conso le-Mode Ins ta l la t ion

Running Console-Mode InstallationTo complete the console-mode installation process, which is currently available in English and Japanese, respond to the prompts in each section with one of the following actions.

Enter the number associated with your choice or press <Enter> to accept the default.

Enter back or previous at the prompt to review or change your selection.

Enter quit in response to any prompt to exit the installation process.

In This Section . . . Perform the Following Action . . .

Choose Locale Choose a language by entering the number associated with that language. Your choice determines both the language displayed during the installation and the language-specific message catalog installed during the installation.

==================================================== Choose Locale... ->1- English CHOOSE LOCALE BY NUMBER: ====================================================

Launching console-mode installation on a system that utilizes a Japanese language environment adds a second choice, 2- Japanese, at the CHOOSE LOCALE BY NUMBER prompt.

Introduction Read the Introduction and press Enter to continue with the installation process.

Choose Install Set Select the install set that you want installed on your system. The following choices appear:

====================================================

Choose Install Set ------------------ Please Choose the Install Set to be installed by this installer.

->1- Full Install 2- Server Install 3- Full Client Install 4- Jolt Client Install 5- ATMI Client Install 6- CORBA Client Install 7- Customize ... ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT: ====================================================

For a list of software component for each install set, see “Install Sets” on page 1-9.

Your selection includes the appropriate encryption software for Link-Level Encryption (LLE) and/or Secure Sockets Layer (SSL).

Custom Install Select custom features.

====================================================

Choose Product Features ------------------ Enter a comma-separated list of numbers representing the features you want to select or deselect. To view a feature’s description, enter ‘?<number>’. Press <RETURN> when you are done.

1-[X] Server 2-[X] ATMI Client 3-[X] CORBA Client 4-[X] Jolt JRLY 5-[X] Jolt Client SELECT FEATURES FOR CUSTOM INSTALLATION: ====================================================

When you first see the Custom Install screen, all Tuxedo components are selected. Entering a number or series of numbers deselects the components.

Note: Entering 1,2,3,4,5 and pressing <RETURN> deselects all the Tuxedo install components. If you press <RETURN> and enter ‘back’to return to the Custom Install screen, all ‘X’s are removed. You must enter a number to select a component.

Need To Select a Component

If you did not select a component, this screen appears.

====================================================

WARNING: Product Feature Selection ---------------------------------- You must select a product feature, otherwise installation will not continue ->1- Re-Select 2- Quit ====================================================

Note: Selecting ‘1- Re-Select’ returns you to the Custom Install screen and all ‘X’s are removed. You must enter a number to select a component.

Choose Oracle Home Directory

Specify the Oracle Home directory that will serve as the central support directory for all Oracle products installed on the target system. If you already have a Oracle Home directory on your system, you can select that directory (recommended) or create a new Oracle Home directory. If you choose to create a new directory, the Oracle Tuxedo installer program will automatically create the directory for you. For details about the Oracle Home directory, see “Oracle Home Directory” on page 1-10.

Enter 1 to create a new Oracle Home directory or, if you already have a Oracle Home directory on your system, enter 2 to select an existing Oracle Home directory. Be sure to use the full pathname when specifying a new Oracle Home directory.

For example:

====================================================

Choose Oracle Home ------------------------- 1- Create a New Oracle Home 2- Use Existing Oracle Home Enter a number: 2 1- /home3/oracle 2- /home2/oraclehome Existing Oracle Home: 1 ====================================================

In this example, we enter 2 to display the Oracle Home directories that have already been created on this system. At the Existing Oracle Home prompt, we enter 1 to specify /home3/Oracle as the Oracle Home directory for this installation. Make sure that you enter the number associated with the Oracle Home directory instead of the directory name.

If a previous Tuxedo installation is in the existing directory you selected, the following screen appears:

====================================================

A previous installation of Tuxedo 12cR1 has been detected at /home3/Oracle. The following options are available: 1- Continue to install over /home3/oracle 2- Cancel to select another Oracle Home Directory: CHOOSE A NUMBER: ====================================================



Choose Product Directory

Specify the directory in which you want to install the Oracle Tuxedo software. You may select the default product directory (tuxedo12cR1) or create a new product directory. If you choose to create a new directory, the Oracle Tuxedo installer will automatically create the directory for you.

The initial default installs the product directory under the Oracle Home directory you specified in the previous section. To accept this default, enter 2 at the prompt.

The choices displayed in this section are as follows:

=================================================== Choose Product Directory ------------------------ 1- Modify Current Selection (/home3/oracle/tuxedo12cR1) 2- Use Current Selection (/home3/oracle/tuxedo12cR1) Enter a number: ===================================================

• Enter 1 to select an alternate directory. The following text appears:Specify Product Installation Directory:

Specify a product directory using its full pathname. For example:/home3/mytux12cR1. When you press Enter, your modified selection appears as the default. 1- Modify Current Selection (/home3/mytux12cR1) 2- Use Current Selection (/home3/mytux12cR1) Enter a number:

• Enter 2 to accept the current selection.If you enter 2 at the initial prompt, you accept the default product directory (/home3/oracle/tuxedo12cR1 in this example).

Install Samples Enter “Y” to install sample Enter “N” not to install samples


Pre-Installation Summary

Review your installation selections. Enter back or previous to modify installation selection. Otherwise press <ENTER> to continue. ====================================================

Pre-Installation Summary ------------------------- Please Review the Following Before Continuing: Product Name: Tuxedo 12cR1 Install Folder: /home3/oracle/tuxedo12cR1 Link Folder: /home3/oracle Disk Space Information (for Installation target): Required: 303,288,858 bytes Available: 19,094,890,496 bytes PRESS <ENTER> TO CONTINUE: ====================================================

Ready To Install The choices displayed in this section are as follows:

=================================================== Ready To Install ------------------------ InstallAnywhere is now ready to install Tuxedo 12cR1 onto your system at the following location: /home3/oracle/tuxedo12cR1 PRESS <ENTER> TO INSTALL: ===================================================

Installing . . . No user input is required here. The installation program is installing Oracle Tuxedo in the user-specified product directory.

It is normal for the installation progress bar to stop for a fairly long time, especially at the end. The Oracle Tuxedo installer is still working when this occurs.

Configure tlisten Service

Enter a tlisten password of your choice. Your password must be a string of alphanumeric characters in clear-text format that is no more than 80 characters in length. You use this password to log in to the Oracle Tuxedo Administration Console.

Oracle Tuxedo uses the tlisten password to protect the local machine from administrative requests and operations that are not authorized. Whenever administrative communications arrive on the local machine through tlisten(1) or wlisten(1) gateway processes, Oracle Tuxedo authenticates them by means of the tlisten password.

===================================================

Configure tlisten Service ------------------------- Password: Verify Password: Good Password! Press "Enter" to continue. ===================================================

SSL Installation Choice ===================================================

SSL Installation Choice ------------------------ Would you like to install SSL Support? ->1- Yes 2- No ENTER THE NUMBER FOR YOUR CHOICE, SELECTION, OR PRESS <ENTER> TO ACCEPT THE DEFAULT: ===================================================

Congratulations! Your installation of the Oracle Tuxedo software is complete!

What Do I Do Next?To prepare for the post-installation tasks, see “Assigning File Ownership on a UNIX System” on page 2-10. To configure your Oracle Tuxedo software, verify that your software is installed correctly, or to uninstall Oracle Tuxedo software, see “Performing Post-Installation Tasks” on page 6-1.

Enter Your LDAP Settings for SSL Support

This section appears only if you have installed CORBA server and/or client software components. Oracle Tuxedo provides a Lightweight Directory Access Protocol (LDAP) based certificate retrieval mechanism that supports certificate-based authentication when using SSL. The Oracle Tuxedo certificate retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.

===================================================

Enter Your LDAP Settings for SSL Support ------------------------ LDAP Service Name: a LDAP PortID: b LDAP BaseObject: c LDAP Filter File Location: Press <ENTER> to accept the default, /home3/oracle/tuxedo12cR1/ udataobj/security/bea_ldap_filter.dat or enter your own: ===================================================

Installation Complete ===================================================

Installation Complete --------------------- Congratulations.Tuxedo 12cR1 has been successfully installed to: /home3/oracle/tuxedo12cR1 PRESS <ENTER> TO EXIT THE INSTALLER. ====================================================v

C H A P T E R 4

Installing Oracle Tuxedo Using Silent Installation

The following sections describe how to install Oracle Tuxedo using silent installation on both Windows and UNIX systems:

What Is Silent Installation?

Before You Start

Using Silent Installation: Main Steps

Creating a Template File

Invoking the Silent Installation Process on a Windows System

Invoking the Silent Installation Process on a UNIX System

Windows Template File

UNIX Template File

What Do I Do Next?


What Is Silent Installation?Silent installation reads the settings for your configuration from a text file that you create prior to beginning the installation. Manual intervention is not necessary during the installation process. Silent installation works on both Windows and UNIX systems.

Silent installation is a way of setting installation configurations only once and then using those configurations to duplicate the installation on many machines.

Note: Using silent installation implies your consent to the License Agreement. You neither see a copy of the Software License Agreement nor have any means to accept the terms of the agreement.


If you are planning to use Oracle Tuxedo 12c Release 1 (12.1.1) in conjunction with a previous Tuxedo version on a Windows system, see “Oracle Installation Program” on page 1-7.

Using Silent Installation: Main StepsThe silent installation process has two primary steps:

1. Create a template file that contains the configuration settings, such as Oracle Home directory, product directory, and install set appropriate for your installation.

For the detailed procedure, see “Creating a Template File” on page 4-3. Two sample template files are provided in “Windows Template File” on page 4-9 and “UNIX Template File” on page 4-11.

2. Invoke the installation process using the values specified in the template files.

For the detailed procedure, see “Invoking the Silent Installation Process on a Windows System” on page 4-6 and “Invoking the Silent Installation Process on a UNIX System” on page 4-7.


Creat ing a Template F i l e

Creating a Template FileTo create a template file for use in the silent installation process, follow these steps:

1. Display the template file specific to your platform. The following templates are available in:

– Windows template file content at “Windows Template File” on page 4-9.

– UNIX template file content at “UNIX Template File” on page 4-11.

2. Copy the contents of the template file and save it as a text file named installer.properties.

3. In the installer.properties file, modify the values for the keywords shown in the following table to create your desired configuration.

The installer.properties file is shown in Table 4-1

Table 4-1 The installer.properties File

For This Keyword . . . Enter the Following Value . . .

INSTALLER_UI= (UNIX and Windows)

The mode of installation. The default is silent; do not modify this value.

ORACLEHOME= (UNIX and Windows)

The full pathname of the Oracle Home directory of your choice. For details about the Oracle Home directory, see “Oracle Home Directory” on page 1-10.

USER_INSTALL_DIR= (UNIX and Windows)

The full pathname of the product directory of your choice.

WARNING: Running a previous Tuxedo version in conjunction with Tuxedo 12c Release 1 (12.1.1) on a Windows system requires that the product directories for both versions do not have the same name.

INSTALL_SAMPLES “yes” installs Tuxedo 12cR1 samples.

“no” does not install samples.

LDAP_HOSTNAME= (UNIX & Windows)

The fully qualified domain name of the Lightweight Directory Access Protocol (LDAP) server of your choice; for example, pcwiz.mydomain.com. (See Note at end of table.)


LDAP_PORTID= (UNIX & Windows)

The port number through which the local machine communicates with the LDAP server; for example, 389.* (See Note at end of table.)

TLISTEN_PORT (Windows)

The port number through which the local machine communicates with the TLISTEN server; for example, 1357.

LDAP_BASE_OBJECT= (Unix & Windows)

The distinguished name of the base object for search in the LDAP server; for example, o=beasys.com. (See Note at end of table.)

LDAP_FILTER_FILE= (Unix & Windows)

The full pathname of the LDAP filter file on your machine; for example, C:\oracle\tuxedo12cR1\udataobj\security\ bea_ldap_filter.dat. (See Note at end of table.)

Table 4-1 The installer.properties File (Continued)



Creat ing a Template F i l e

Notes: Keywords: LDAP_HOSTNAME, LDAP_PORTID, LDAP_BASE_OBJECT, LDAP_FILTER_FILE are optional.

Include these keywords and their values only if you want to use Secure Sockets Layer (SSL) encryption. Otherwise, comment these lines out by preceding them with hash marks (#).

Keywords: TLISTEN_PORT, and TLISTEN_PASSWORD are also optional

TLISTEN_PASSWORD= (Unix & Windows)

A tlisten password of your choice. The password must be a string of alphanumeric characters in clear-text format that is no more than 80 characters in length. You will be prompted to enter this password when logging in to the Oracle Tuxedo Administration Console.

CHOSEN_INSTALL_SET= The chosen installation set. You must set this value to one of the following options:

Notes: The valid options are case sensitive and should be coded exactly as defined below for proper installation. Use of invalid options will result in improper installation.

Spaces should not be included after the install set name. If there are spaces after the install set name, the installation process uses the default mode Full Install.

• Full for a full installation• Server for server-only installation• Client for full client installation• ATMI for ATMI-client-only installation,• CORBA for CORBA-client-only installation• Jolt for Jolt-client-only installation• DNET for Tuxedo .NET Workstation client only

installation (Windows platforms only.)

No customizing of install sets is possible with silent-mode installation. For a description of install sets, see “Install Sets” on page 1-9.

Table 4-1 The installer.properties File (Continued)



Include these keywords and their values only if you select Server (server-only installation).

In the template files, comment lines are preceded by hash marks (#). The installer program does not read any line beginning with a hash mark.

Invoking the Silent Installation Process on a Windows System

Installing the software using silent installation takes the same amount of time as a standard installation. During silent installation, an initial installation program window appears briefly, indicating that the installation has started.

To invoke the silent installation process on a Windows system, follow these steps:

1. Select a Windows system that meets the hardware and software requirements described in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

The Windows XP system supports only Oracle Tuxedo client components.

2. Log in to the Windows system as the Administrator or as a member of the Administrator group.

You need administrative privileges to install Oracle Tuxedo server components on a Windows system. If you are going to install only Oracle Tuxedo client components, you do not need administrative privileges.



4. If installing Oracle Tuxedo by downloading from the Oracle Web site:

a. Open a command-line shell.

b. Go to http://www.oracle.com/technology/software/index.html and download the Oracle Tuxedo 12c Release 1 (12.1.1) installation file specific to your platform.

c. Go to the directory where you downloaded the installer and invoke the installation procedure by entering the following command:

prompt> filename.exe -f path\installer.properties



Invok ing the S i l ent Ins ta l la t i on P rocess on a UNIX Sys tem

where filename is the name of the Oracle Tuxedo installer file, and path is the full or relative pathname of the installer.properties file.

Note: If a file named installer.properties is present in the same directory as the installer (for example, tuxedo81_win.exe), it will be supplied automatically in silent mode. However, if installer.properties is in a different directory, you may use the -f command line option to specify the properties file. For example, filename.exe -f path\installer.properties

5. To verify that the software installed successfully, see “Performing Post-Installation Tasks” on page 6-1.

6. Re-login to the system after Tuxedo 12c Release 1 (12.1.1) installation has completed.

Invoking the Silent Installation Process on a UNIX SystemInstalling the software using silent installation takes the same amount of time as a standard installation. During silent installation, a startup message appears followed by an “Installing . . .” message, indicating that the installation has started.

To invoke the silent installation process on a UNIX system, follow these steps:

1. Select a UNIX system that meets the hardware and software requirements described in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.







prompt> sh filename.bin -f path/installer.properties

where filename is the name of the Oracle Tuxedo installer file, and path is the full or relative pathname of the installer.properties file.



Note: If a file named installer.properties is present in the same directory as the installer (for example, tuxedo81_sol.bin), it will be supplied automatically in silent mode. However, if installer.properties is in a different directory, you may use the -f command line option to specify the properties file. For example, filename.exe -f path/installer.properties

5. To verify that the software installed successfully, see “Performing Post-Installation Tasks” on page 6-1.


Windows Template F i l e

Windows Template FileThis sample Windows template file (installer.properties) in Listing 4-1 applies to a silent installation of Oracle Tuxedo 12c Release 1 (12.1.1).

Listing 4-1 Windows installer.properties Template File

INSTALLER_UI=silent ### Locale ### USER_LOCALE=en ### Oracle Home Directory ### ### NOTE: backslashes must be escaped. ### ORACLEHOME=c:\\oracle\\tuxedo12cR1 ### Product Installation Directory ### USER_INSTALL_DIR=c:\\oracle\\tuxedo12cR1 ### LDAP Service Name ### LDAP_HOSTNAME=pcwiz.mydomain.com ### LDAP PortID ### LDAP_PORTID=389 ### LDAP BaseObject ### LDAP_BASE_OBJECT="o=beasys.com" ### LDAP Filter File Location ### LDAP_FILTER_FILE=c:\\oracle\\tuxedo12cR1\\udataobj\\security\\ bea_ldap_filter.dat ### Default Listen Port, User Can Run ### ### Oracle Tuxedo 12cR1 Administration in ### ### Control Panel to Change to Another Port ### TLISTEN_PORT=1357 ### Tlisten Password ### TLISTEN_PASSWORD=luckluck ### TLISTEN ENCRYPTION### ENCRYPT_CHOICE_BOOLEAN_2=0 ENCRYPT_CHOICE_BOOLEAN_1=1 SSL_PNAME=test1 SSL_PLOC=test1.pem SSL_PPASS=passwd min_crypt_bits_1=0


min_crypt_bits_2=1 min_crypt_bits_3=0 min_crypt_bits_4=0 max_crypt_bits_1=0 max_crypt_bits_2=0 max_crypt_bits_3=1 max_crypt_bits_4=0 ### Valid Install Sets, select one:### ### CHOSEN_INSTALL_SET=Full### ### CHOSEN_INSTALL_SET=Server### ### CHOSEN_INSTALL_SET=Client### ### CHOSEN_INSTALL_SET=ATMI### ### CHOSEN_INSTALL_SET=CORBA### ### CHOSEN_INSTALL_SET=Jolt### ### CHOSEN_INSTALL_SET=DNET### ### NOTE: Spaces should not be included after the install set name. ### ### If there are spaces after the install set name, the installation ### ### process uses the default mode Full Install. ### CHOSEN_INSTALL_SET=Full Install ### Install Samples Y/N### INSTALL_SAMPLES=Yes

Note: ENCRYPT_CHOICE_BOOLEAN_1=1: "1" means tlisten supports SSL. ENCRYPT_CHOICE_BOOLEAN_2=1: "1" means tlisten supports LLE. 0 means SSL/LLE is not supported. If one of the encryption methods (SSL or LLE) is set to 1, the other must be set to 0.

min_crypt_bits_1: "1" means min encryption bit 0 is set, "0" not set min_crypt_bits_2: "1" means min encryption bit 56 is set, "0" not set min_crypt_bits_3: "1" means min encryption bit 128 is set, "0" not set min_crypt_bits_4: "1" means min encryption bit 256 is set, "0" not set One encryption method must be set to 1; the other must be set to 0.

max_crypt_bits_1: "1" means max encryption bit 0 is set, "0" not set max_crypt_bits_2: "1" means max encryption bit 56 is set, "0" not set max_crypt_bits_3: "1" means max encryption bit 128 is set, "0" not set max_crypt_bits_4: "1" means max encryption bit 256 is set, "0" not set One encryption method must be set to 1; the other must be set to 0.


UNIX Template F i l e

SSL_PNAME = SECURITY PRINCIPAL NAME

SSL_PLOC = SECURITY PRINCIPAL LOCATION

SSL_PPASS = SECURITY PRINCIPAL PASSWORD

UNIX Template FileThis sample UNIX template file (installer.properties) in Listing 4-2 applies to a silent installation of Oracle Tuxedo 12c Release 1 (12.1.1).

Listing 4-2 UNIX installer.properties Template File

INSTALLER_UI=silent ### Locale ### USER_LOCALE=en ### Oracle Home Directory ### ORACLEHOME=/home/user/oracle/tuxedo12cR1 ### Product Installation Directory ### USER_INSTALL_DIR=/home/user/oracle/tuxedo12cR1 ### LDAP Service Name ### LDAP_HOSTNAME=pcwiz.mydomain.com ### LDAP PortID ### LDAP_PORTID=389 ### LDAP BaseObject ### LDAP_BASE_OBJECT="o=beasys.com" ### LDAP Filter File Location ### LDAP_FILTER_FILE=/home/user/oracle/tuxedo12cR1/udataobj/security/ bea_ldap_filter.dat ### Tlisten Password ### TLISTEN_PASSWORD=luckluck ### Valid Install Sets, select one:### ### CHOSEN_INSTALL_SET=Full### ### CHOSEN_INSTALL_SET=Server### ### CHOSEN_INSTALL_SET=Client### ### CHOSEN_INSTALL_SET=ATMI### ### CHOSEN_INSTALL_SET=CORBA### ### CHOSEN_INSTALL_SET=Jolt###


### NOTE: Spaces should not be included after the install set name. ### ### If there are spaces after the install set name, the installation ### ### process uses the default mode Full Install. ### CHOSEN_INSTALL_SET=Full Install CHOSEN_INSTALL_SET=Full Install ### Install Samples Y/N### INSTALL_SAMPLES=Yes

What Do I Do Next?To prepare for the post-installation tasks, read the following sections:

“Assigning File Ownership on a UNIX System” on page 2-10

“Understanding the Oracle Tuxedo Shortcuts on a Windows System” on page 2-11

“Understanding the Oracle Administration Program on a Windows System” on page 2-12

“Reviewing the Windows Server Registry Content” on page 2-13

To configure your Oracle Tuxedo software, verify that your software is installed correctly, or to uninstall Oracle Tuxedo software, see “Performing Post-Installation Tasks” on page 6-1.


C H A P T E R 5

Upgrading the Oracle Tuxedo System to 12c Release 1 (12.1.1)

The following sections provide procedures for upgrading your Oracle Tuxedo or Oracle WebLogic Enterprise application to Oracle Tuxedo 12c Release 1 (12.1.1) using simple and hot upgrade procedures:

Preparing Your Machine for an Upgrade

Selecting an Upgrade Procedure

Backing Up Files

Performing a Simple Upgrade

Performing Additional Upgrade Steps to Windows Server

Upgrading from Tuxedo 6.5 to Tuxedo 12c Release 1 (12.1.1)

Performing a Hot Upgrade

Rebuilding an Application

Installing Oracle Jolt 12c Release 1 (12.1.1) with Oracle WebLogic Server

Preparing Your Machine for an UpgradeBefore you install the Oracle Tuxedo 12c Release 1 (12.1.1) software on a machine, make sure that the required version of the operating system and the compiler have been installed. For


operating system and compiler requirements for each supported platform, see “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

Selecting an Upgrade ProcedureIf you are installing Oracle Tuxedo 12c Release 1 (12.1.1) on a platform that contains an earlier release of Oracle Tuxedo software or the Oracle WebLogic Enterprise software, be sure to read the following procedures carefully.

If you can shut down your application for the upgrade, then shut down your application and perform a simple upgrade. For instructions on performing a simple upgrade, see “Performing a Simple Upgrade” on page 5-3.

If you cannot shut down your application for the upgrade, you can perform a hot upgrade for any of the following software products to Oracle Tuxedo 12c Release 1 (12.1.1) without having to shut down your enterprise:

Versions 8.1, 9.0, 9.1, 10.0, 10.3, 11.1.1.1.0, 11.1.1.2.0, and 11.1.1.3.0 of Oracle Tuxedo

Version 5.1 of WebLogic Enterprise

You can add the Oracle Tuxedo 12c Release 1 (12.1.1) software to existing Oracle Tuxedo or Oracle WebLogic Enterprise domains without shutting down the existing applications, and you can add new Oracle Tuxedo 12c Release 1 (12.1.1) application servers to those domains without shutting down the existing applications. For instructions on performing a hot upgrade, see “Performing a Hot Upgrade” on page 5-6.

To upgrade your application . . .

If you CAN shut down your applicationfor the upgrade . . .

Perform a Simple Upgrade Perform a Hot Upgrade

If you CANNOT shut down your applicationfor the upgrade . . .


Back ing Up F i l es

Backing Up FilesThere are certain files that you need to back up prior to the installation and then restore after the installation is complete. Any modifications that you made to these files will be overwritten when the new Oracle Tuxedo software is installed.

To avoid having to modify these files again, follow these steps:

1. Back up the RM file to a temporary location. The RM file contains database vendor-specific settings that are used by commands such as buildtms and buildXAJS. It is located in the tux_prod_dir/udataobj directory, where tux_prod_dir is the directory in which you installed the Oracle Tuxedo or Oracle WebLogic Enterprise software.

2. Back up the tuxwsvr.ini and webgui.ini files to a temporary location. These files contain customized initialization settings for the Oracle Tuxedo Administration Console server and GUI. The tuxwsvr.ini file is located in the tux_prod_dir/udataobj directory, and the webgui.ini file is located in the tux_prod_dir/udataobj/webgui directory.

3. Back up the CATNAMES, jrepository, and jrly.config files. The CATNAMES file is located in the tux_prod_dir/locale directory. The jrepository and jrly.config files are located in the tux_prod_dir/udataobj/jolt directory structure.

4. Move any files that you or your coworkers added to the tux_prod_dir directory to a temporary location.

5. After the installation is complete, restore these files to their original locations.

Performing a Simple UpgradeA simple upgrade consists of the following basic steps:

1. If you already have the DMTLOG, make sure that no pending transaction log is in it.

2. Shut down the application.

3. Back up files as described in “Backing Up Files” on page 5-3.

4. Update the text version of the configuration file on the MASTER machine by running the tmunloadcf(1) command.

5. Back up the old binary version of the configuration file.

6. If upgrading a Oracle Tuxedo 9.1 machine, uninstall the Oracle Tuxedo system software as described in “Uninstalling Oracle Tuxedo” on page 6-31.


7. If upgrading a Windows machine running Oracle WebLogic Enterprise or Oracle Tuxedo 10.0 or earlier software, perform the additional steps specified in “Performing Additional Upgrade Steps to Windows Server” on page 5-4.

8. Install the Oracle Tuxedo 12c Release 1 (12.1.1) software on at least the MASTER and backup MASTER machines.

9. Reload the text version of the configuration file by running tmloadcf(1) on the MASTER machine.

10. If necessary, recompile and relink your application programs.

11. If you already have the DMTLOG, remove it.

12. Reboot the application.

13. As time permits, shut down and upgrade the other machines in your configuration.

Performing Additional Upgrade Steps to Windows ServerFor a Windows machine running Oracle WebLogic Enterprise or Oracle Tuxedo 12c Release 1 (12.1.1) or earlier software, perform the following additional steps before installing the Oracle Tuxedo 12c Release 1 (12.1.1) software to ensure that you are starting with a clean system.

1. Stop the Tuxedo TListen and Oracle procMGR services. From the Start menu, click Start → All Programs → Administrative Tools → Services. The Services window appears.

Note: The Oracle Tuxedo procMGR service is called IPC Helper in Oracle Tuxedo 6.5 or Oracle WebLogic Enterprise 5.1.

2. Scroll to the entry for the TListen service, select it, and then click the Stop button. The Status value should change from Started to a blank entry. Then scroll to the Oracle procMGR (or IPC Helper) service, select it, and click the Stop button. In some cases, you may see an error; however, the service’s Status value should change from Started to a blank entry. Click the Close button.

3. Run the Windows Add/Remove program to remove the prior Oracle Tuxedo or Oracle WebLogic Enterprise software version. From the Start menu, choose Start → Settings → Control Panel → Add/Remove Programs. The Add/Remove Programs Properties window appears.

4. Scroll to the entry for the prior Oracle Tuxedo or Oracle WebLogic Enterprise software, select it, and click the Add/Remove button.


Upgrading f r om Tuxedo 6 .5 to Tuxedo 12c Re lease 1 (12 .1 .1)

Note: If you have both the C++ and Java components of WebLogic Enterprise 5.1 installed on your machine, you must remove the Java software before removing the C++ software.

5. In response to the prompt, confirm that you want to uninstall the software. After the program finishes, the Remove Programs From Your Computer window appears.

6. If the uninstall program was not able to remove all directories (usually because the files were added after the original installation), you can click the Details button to find out which directories remain on your system. If the files in the directories contain changes that you made, such as a modified sample file, move the modified files to a temporary location.

7. Reboot your system after the uninstall completes.

Upgrading from Tuxedo 6.5 to Tuxedo 12c Release 1 (12.1.1)

If you are upgrading from Tuxedo 6.5 to Tuxedo 12c Release 1 (12.1.1), please note the following:

In order to allow a Tuxedo 12c Release 1 (12.1.1) server to interoperate with Tuxedo 6.5 software, the Tuxedo 12c Release 1 (12.1.1) server servopts -t option must be specified. The server may be a workstation listener (WSL) process (where the servopts -t option allows interoperability for all of its workstation handler—WSH—processes), a domain gateway (GWTDOMAIN) process, or a system or application server process. For more information, see GWTDOMAIN(5) in the Oracle Tuxedo File Formats, Data Descriptions, MIBs, And System Processes Reference.

In order to allow a domain gateway (GWTDOMAIN) in Tuxedo 12c Release 1 (12.1.1) to interoperate with a domain gateway running on Tuxedo 6.5. you must upgrade to Tuxedo 6.5 patch level 446.

If you have not upgraded to patch level 446, then you must set the TM_GWT_OLDSECCHECK environment variable of the domain gateway in this Tuxedo 12c Release 1 (12.1.1). For more Oracle Tuxedo environment variable information, see tuxenv(5) in the Oracle Tuxedo File Formats, Data Descriptions, MIBs, And System Processes Reference.

If your Tuxedo 6.5 COBOL program calls TPINITIALIZE(), you must set the TM_CBL_IGNORE_CONTEXT environment variable to “Y” when you run the COBOL application. For more Oracle Tuxedo environment variable information, see tuxenv(5) in the Oracle Tuxedo File Formats, Data Descriptions, MIBs, And System Processes Reference.


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/rf5/rf5.html#wp1149066



Performing a Hot UpgradeBefore performing a hot upgrade, back up files as described in “Backing Up Files” on page 5-3.

During the hot upgrade, you must shut down the MASTER and backup MASTER machines serially. The remainder of the configuration is unaffected.

Pre-Upgrade NotesOnce you have finished migrating the MASTER to Oracle Tuxedo 12c Release 1 (12.1.1) (via a hot upgrade), you will not be able to migrate it back to the acting backup until you have upgraded the backup to Oracle Tuxedo 12c Release 1 (12.1.1). In other words, migrating the MASTER is an irreversible procedure; once you have completed it, you cannot change the MASTER back to the release of the Oracle Tuxedo software on which it was running previously.

When you run tmadmin(1) on a Oracle Tuxedo 12c Release 1 (12.1.1) machine with an old-release MASTER, the UPGRADE file shown in “Hot-Upgrade Example” on page 5-8 must reside in the current directory. To make sure that the files are in the current directory, you might, for example, run tmadmin from the Tuxedo application directory: %APPDIR% (Windows)/ $APPDIR (UNIX) directory.

During migration, keep in mind the following guidelines regarding the Oracle Tuxedo data storage areas:

You will be instructed to remove the old TUXCONFIG file. The TUXCONFIG file is propagated automatically when the backup machine is run; therefore, you do not need to do anything.

Create the TLOG when you load the software. If you already have a TLOG, remove it.

Do not do anything with application queue spaces and queues.

If you have a Domains configuration (BDMCONFIG) file, leave it as is.

To minimize downtime, Oracle recommends installing Oracle Tuxedo 12c Release 1 (12.1.1) on the MASTER machine and backup MASTER, and rebuilding all clients and servers in the directory on each machine that is defined by %APPDIR%/ $APPDIR, in parallel with the directory in which the old-release clients and servers were created. In other words, both an old-release application and a Oracle Tuxedo 12c Release 1 (12.1.1) application should be available on each machine. This advice is not a requirement, but a recommendation.

The Oracle Tuxedo software supports device list path entries of up to 256 bytes in length (in previous releases the limit was 64 bytes in length.) Queue Spaces, TLOG files, and other


Pe r fo rming a Hot Upgrade

configuration files originally created with an earlier version of Oracle Tuxedo are understood and supported with this release. However, such device lists originally created with Oracle Tuxedo 8.0 or earlier are restricted to 64-byte path names. Therefore, if the administrator wants to add a new extent using a path name greater than 64 bytes in length to a queue space in the future and such queue space is empty when the upgrade is performed, the administrator may want to create the queue space device list and the queue space at the time of the hot upgrade. Many applications need to preserve queue spaces across an upgrade and will not be able to recreate them. Furthermore, most applications will not need to add queue space extent in the future or will be able to do so using path names no longer than the ones they are currently using. This queue space recreation is completely optional and mentioned for completeness.

If you already have the DMTLOG, make sure that no pending transaction log is in it before shutting down the application, and keep in mind that removing the DMTLOG (if it exists) after the application is shut down.

Hot-Upgrade ProcedureThis section provides an overview of the tasks for a “hot upgrade.”

1. Make sure your environment is set up as follows:

– The configuration must have a backup MASTER machine.

– The MODEL option in the configuration must be set to MP.

– The MIGRATE option in the configuration must be set.

2. If upgrading a Oracle Tuxedo 9.1 machine, uninstall the Oracle Tuxedo system software as specified in “Uninstalling Oracle Tuxedo” on page 6-31.

3. If upgrading a Windows machine running Oracle WebLogic Enterprise or Oracle Tuxedo 9.1 or earlier software, perform the additional steps specified in “Performing Additional Upgrade Steps to Windows Server” on page 5-4.

4. Shut down the backup MASTER machine.

5. Install the Oracle Tuxedo 12c Release 1 (12.1.1) software on the backup MASTER machine and reboot the backup machine.

6. Migrate the MASTER machine running the old release to the backup MASTER machine running Oracle Tuxedo12c Release 1 (12.1.1).

7. Shut down the machine that is now acting as the backup MASTER.


8. Install Oracle Tuxedo 12c Release 1 (12.1.1) on the old MASTER.

9. Using Oracle Tuxedo 12c Release 1 (12.1.1), reboot the machine that you shut down in step 7.

For more information about hot upgrades, refer to the following section, “Hot-Upgrade Example.”

Hot-Upgrade ExampleThe following example describes a sample scenario for a hot upgrade and the sequence of steps to perform the hot upgrade.

Suppose you have the following on a UNIX platform:

A machine called MACH1 that is configured as the MASTER and that runs an old release

– A corresponding application directory called $APPDIR1

– A corresponding configuration file called $TUXCONFIG1

A machine called MACH2 that is configured as the backup

– A corresponding application directory called $APPDIR2

– A corresponding configuration file called $TUXCONFIG2

Refer to the following instruction sequence in Listing 5-1 to perform a hot upgrade for your application.

Listing 5-1 Typical Hot Upgrade

MACH1> tmshutdown -B MACH2 -l MACH2 MACH1> Run tmconfig to reset the APPDIR, TUXCONFIG, TUXDIR for MACH2 MACH2> Kill tlisten process MACH2> Load Tuxedo 12cR1 if it is not already loaded MACH2> cd $APPDIR2 MACH2> rm $TUXCONFIG2 MACH2> >UPGRADE # Indicator that upgrade being done MACH2> Reset PATH, LD_LIBRARY_PATH, TUXCONFIG, APPDIR MACH2> Rebuild clients and servers, create TLOG MACH2> Start Tuxedo 12cR1 tlisten MACH1> >UPGRADE # Indicator that upgrade being done MACH1> tmboot -B MACH2 -l MACH2 MACH2> tmadmin master y


Rebu i ld ing an Appl i cat ion

psr q MACH2> tmshutdown -B MACH1 -l MACH1 MACH2> Run tmconfig to reset the APPDIR, TUXCONFIG, TUXDIR for MACH1 MACH1> Kill tlisten process MACH1> Load Tuxedo 12cR1 if it is not already loaded MACH1> cd $APPDIR1 MACH1> rm $TUXCONFIG1 MACH1> Reset PATH, LD_LIBRARY_PATH, TUXCONFIG, APPDIR MACH1> Rebuild clients and servers, create TLOG MACH1> Start Tuxedo 12cR1 tlisten MACH1> rm UPGRADE # Remove indicator that upgrade being done MACH2> rm UPGRADE # Remove indicator that upgrade being done MACH2> tmboot -B MACH1 -l MACH1

Note: If you are performing the upgrade illustrated in Listing 5-1 from a Windows platform, be sure to stop the Oracle Tuxedo procMGR (called IPC Helper in Oracle Tuxedo 6.5 or Oracle WebLogic Enterprise 5.1) service after stopping the tlisten process and to start the Oracle Tuxedo procMGR service before starting the tlisten process.

Rebuilding an ApplicationNow that you have successfully installed the Oracle Tuxedo software, you need to rebuild all application clients and servers that you want to execute on a system upgraded to Oracle Tuxedo 12c Release 1 (12.1.1)

Notes: The rebuild is not necessary when you upgrade from Oracle Tuxedo 11.1.1.1.0 to 12.1.1.

The TMS server must be rebuilt when upgrading a previous Oracle Tuxedo version to Oracle Tuxedo 12c Release 1 (12.1.1).

You should also remove any old TUXCONFIG files and reload them using the newly installed tmloadcf(1).

If your Oracle Tuxedo system applications are distributed, the MASTER and backup MASTER machines must run the highest release of the Oracle Tuxedo software of any machines in the configuration. Other machines, including Workstation clients, may continue to use executables from an earlier release. For example, even if your MASTER and backup MASTER machines are running Oracle Tuxedo 12c Release 1 (12.1.1), Oracle Tuxedo 6.5 or later may still be used on other machines.


There is one important exception to the “highest release” rule. If you wish to install Oracle Tuxedo 12c Release 1 (12.1.1) only on Workstation clients, and you do not want to upgrade any of your Oracle Tuxedo system server machines to Oracle Tuxedo 12c Release 1 (12.1.1), you may do so. In other words, with any release level beginning with Oracle Tuxedo 6.5, Workstation clients may be intermixed freely in a configuration in which the MASTER machines is running Oracle Tuxedo 6.5 or later.

Installing Oracle Jolt 12c Release 1 (12.1.1) with Oracle WebLogic Server

This section provides supplementary installation instructions for customers using Oracle Jolt 12c Release 1 (12.1.1) with Oracle WebLogic Server 6.1, 7.0, or 8.1 and Oracle Tuxedo 6.5, 7.1, 8.0, 8.1, 9.0, 9.1, or 10.0. You can install the Jolt client personality software known as “Oracle Jolt for Oracle WebLogic Server” on an Oracle WebLogic Server 6.1, 7.0, or 8.1 machine by copying the Jolt client personality software from a Oracle Tuxedo 12c Release 1 (12.1.1) machine to the target Oracle WebLogic Server machine. Of course, if the Oracle Tuxedo 12c Release 1 (12.1.1) machine and the target Oracle WebLogic Server machine are the same machine, you need only include the Jolt client library class files in your CLASSPATH variable setting.

The “Oracle Jolt for Oracle WebLogic Server” client software consists of three JAR files: jolt.jar, joltjse.jar, and joltwls.jar. Include these files in your CLASSPATH variable setting.

For instructions on configuring the Jolt connection pool on Oracle WebLogic Server, see Using Oracle Jolt with Oracle WebLogic Server.


C H A P T E R 6

Performing Post-Installation Tasks

The following sections describe the tasks you perform after installing Oracle Tuxedo:

Understanding the Oracle Tuxedo Directory Structure

Understanding the Oracle Tuxedo Architecture

Using the Registry to Further Restrict Access on a Windows System

Setting Up Your Environment

Starting the tlisten Process

Editing a UBBCONFIG File

Using the TYPE Parameter in UBBCONFIG

Checking IPC Requirements

Creating the Universal Device List and the Transaction Log

Running simpapp to Verify Your Installation

Running buildtms for Oracle Tuxedo Applications That Use XA Resource Managers

Uninstalling Oracle Tuxedo

Reinstalling Oracle Tuxedo


Understanding the Oracle Tuxedo Directory StructureDuring the Oracle Tuxedo software installation, the installer program creates the following directory structure for a full installation. A full installation contains all the Oracle Tuxedo server and client software components plus the Link-Level Encryption (LLE) and Secure Sockets Layer (SSL) encryption software packages.

Oracle Tuxedo 12c Release 1 (12.1.1) Directory Structure is shown in Figure 6-1.

Figure 6-1 Oracle Tuxedo 12c Release 1 (12.1.1) Directory Structure

The product directory shown here, tuxedo12c Release 1 (12.1.1), is the default for Oracle Tuxedo 12c Release 1 (12.1.1). The default name can be changed during installation.

udataobj

tuxedo12cR1

tux.env

help

bin

uninstaller

locale lib

include

(UNIX Only)

atmi corba

java

webguijolt

lic.txt

simpapp simpapp

security

snmp

javajdk

jolt

wls etc

tlisten.pw

cobinclude

samples

jre

inventory


Unders tanding the Orac le Tuxedo D i rec to ry S t ruc ture

The top-level directories and files of the Oracle Tuxedo directory structure are briefly described in Table 6-1.

Table 6-1 Top-level Directories and Files of the Oracle Tuxedo Directory Structure

Directory Name Description

samples

Note: Samples are not installed unless they are selected during Tuxedo 12cR1 installation.

Contains sample code and resources designed to help you learn how to develop your own applications using Oracle Tuxedo. The samples directory contains the following subdirectories:• atmi

A collection of simple applications that demonstrate the many features of the Oracle Tuxedo Application-to-Transaction Monitor Interface (ATMI) server software.

• corba A collection of simple applications that demonstrate the many features of the Oracle Tuxedo Common Object Request Broker Architecture (CORBA) C++ server software.

• jolt A collection of simple applications that demonstrate the many features of the Oracle Jolt server software.

help Contains online help files for the Oracle Tuxedo Administration Console.

jre directory A directory containing the 1.5x version of the Java Runtime Environment (JRE). JRE 1.5.x provides the Java Virtual Machine, or JVM, required by the Oracle Tuxedo installation program. This version of the JRE is included in the Oracle Tuxedo 12c Release 1 (12.1.1) distribution. It is automatically installed in the Oracle Home directory when you install Oracle Tuxedo.

Note: The JRE cannot be used for development. To develop Oracle Tuxedo Java client applications, you must ensure that the Java Development Kit (JDK) is installed on your system.


bin Contains Tuxedo, Jolt, and SNMP Agent executable programs.

uninstaller Contains code required to uninstall the Oracle Tuxedo software.

locale Contains subdirectories to support the localization of system messages. C subdirectory contains message catalogs for the default locale (U.S. English).

cobinclude Contains .cbl file entries for use in COBOL programs.




Unders tanding the Orac le Tuxedo D i rec to ry S t ruc ture

lib Contains compiled object files, including dynamic shared libraries (for platforms on which Oracle Tuxedo uses dynamic shared libraries) and other object files needed to build Oracle Tuxedo clients and servers.

include Contains C and C++ language header files, as well as OMG IDL files. Includes subdirectories unicode and xercesc; may include subdirectory rpc, depending on the platform.

udataobj Contains other directories and files required by Oracle Tuxedo. The udataobj directory contains the following subdirectories and files:• security

Contains the default Lightweight Directory Access Protocol (LDAP) filter file (bea_ldap_filter.dat) and LLE-related and SSL-related encryption files.

• jolt Contains the files for the Oracle Jolt software components that you selected to install.

• snmp Contains the etc directory, which in turn contains the SNMP Agent configuration files, MIB files, and other miscellaneous files.

• java Contains the classes and Java archive files needed to run Java applications.

• webgui Contains the Java and image files for the Oracle Tuxedo Administration Console.

• tlisten.pw (file) Contains the tlisten administrative password that you entered during the installation.

tux.env (file) UNIX systems only: Contains Oracle Tuxedo environment variables for UNIX installations and serves as a model for setting those variables.




Understanding the Oracle Tuxedo ArchitectureFigure 6-2 shows an Oracle Tuxedo domain, which is the basis of the Oracle Tuxedo architecture.

Figure 6-2 Simplified View of Oracle Tuxedo Architecture

A Tuxedo domain, also known as a Tuxedo application, is a business software program, built upon the Tuxedo system, that is defined and controlled by a single configuration file—the UBBCONFIG file. A Tuxedo domain consists of many system processes, one or more application client processes, one or more application server processes, and one or more computer machines connected over a network.

Other important terms and concepts that you need to know about Oracle Tuxedo before performing post-installation checks are briefly described in the following sections:

UBBCONFIG File

MASTER Machine

TUXCONFIG File

TUXCONFIG Environment Variable

Server Object

NativeClient Object

Server

NativeClientServer

Bridge Bridge

Object

WSH

WorkstationClient

ISH

CORBA C++Client

Server Machine 2 Running Oracle TuxedoServer Machine 1 Running Oracle TuxedoRelease 12cR1 Software Release 12cR1 Software

NetworkConnection

Oracle Tuxedo Domain


Unders tanding the Orac le Tuxedo Arch i tec ture

TUXDIR Environment Variable

There is no need to fully understand these terms now; rather, use the sections as a reference. As you come upon these terms during the post-installation procedures, refer back to these sections to understand exactly what these terms mean.

UBBCONFIG FileEach Tuxedo domain is controlled by a configuration file in which installation-dependent parameters are defined. The text version of the configuration file is referred to as UBBCONFIG, although the configuration file may have any name, as long as the content of the file conforms to the format described in reference page UBBCONFIG(5) in OracleTuxedo File Formats, Data Descriptions, MIBs, and System Processes Reference.

The UBBCONFIG file for a Tuxedo domain contains all the information necessary to boot the application, such as lists of its resources, machines, groups, servers, available services, and so on. It consists of nine sections, five of which are required for all configurations: RESOURCES, MACHINES, GROUPS, SERVERS, and SERVICES.

MASTER MachineThe MASTER machine, or MASTER node, for a Tuxedo domain contains the domain’s UBBCONFIG file, and is designated as the MASTER machine in the RESOURCES section of the UBBCONFIG file. Starting, stopping, and administering a Tuxedo domain is done through the MASTER machine.

In a multi-machine Tuxedo domain running different releases of the Tuxedo system software, the MASTER machine must run the highest release of the Tuxedo system software in the domain.

TUXCONFIG FileThe TUXCONFIG file is a binary version of the UBBCONFIG file. It is created by running the tmloadcf(1) command, which parses UBBCONFIG and loads the binary TUXCONFIG file to the location referenced by the TUXCONFIG environment variable. As with UBBCONFIG, the TUXCONFIG file may be given any name.

The MASTER machine for a Tuxedo domain contains the master copy of the TUXCONFIG file. Copies of the TUXCONFIG file are propagated to all other server machines—referred to as non-MASTER machines—in a Tuxedo domain whenever the Tuxedo system is booted on the MASTER machine.


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/rf5/rf5.html

TUXCONFIG Environment VariableThe TUXCONFIG environment variable defines the location on the MASTER machine where the tmloadcf(1) command loads the binary TUXCONFIG file. It must be set to an absolute pathname ending with the device or system file where TUXCONFIG is to be loaded.

The TUXCONFIG pathname value is designated in the MACHINES section of the UBBCONFIG file. It is specified for the MASTER machine and for every other server machine in the Tuxedo domain. When copies of the binary TUXCONFIG file are propagated to non-MASTER machines during system boot, the copies are stored on the non-MASTER machines according to the TUXCONFIG pathname values.

TUXDIR Environment VariableThe TUXDIR environment variable defines the product installation directory of the Oracle Tuxedo software on the MASTER machine. It must be set to an absolute pathname ending with the name of the product installation directory.

The TUXDIR pathname value is designated in the MACHINES section of the UBBCONFIG file. It is specified for the MASTER machine and for every other server machine in the Tuxedo domain.

Using the Registry to Further Restrict Access on a Windows System

Oracle Tuxedo-provided client programs are run directly by users with the users’ own permissions. In addition, users running native clients (that is, clients running on the same machine on which the server program is running) have access to the UBBCONFIG file and interprocess communication (IPC) mechanisms such as the bulletin board (a reserved piece of shared memory in which parameters governing the application and statistics about the application are stored).

To gain access to the Oracle Tuxedo functionality, native clients join a Oracle Tuxedo application using the identity of the application administrator (tpsysadm). However, because tpsysadm is a trusted user, this setting causes the Oracle Tuxedo system to bypass the user authentication process.

To prevent this lapse in security on your Windows 2003 server machine, follow these steps:

1. Choose Start → Run to launch the Run dialog box, enter regEdt32, and click OK to launch the Registry Editor window.


Set t ing Up Your Env i ronment

2. Select HKEY_LOCAL_MACHINE → Software → Oracle Systems → Tuxedo → 10.3.0.0_VS2005.

3. Select SECURITY → Permissions.

4. Disable control for Everyone and allow access only to users with administrative privileges.

Setting Up Your EnvironmentYou need to set several environment variables before using Oracle Tuxedo to build and run Oracle Tuxedo applications. Table 6-2, Table 6-3, Table 6-4, Table 6-5 list and define many of those environment variables.

Table 6-2 Oracle Tuxedo Core Environment Variables

Environment Variable Description

TUXDIR Absolute pathname of the product directory in which you installed the Oracle Tuxedo software on this machine. TUXDIR must be set on both server and client-only machines.

APPDIR Absolute pathname of the application directory in which application and administrative servers will be booted on this server machine. APPDIR may be set to more than one application directory.

TUXCONFIG Absolute pathname of the device or system file where the binary TUXCONFIG file is found on this server machine. The TUXCONFIG file is created by running the tmloadcf(1) command on the UBBCONFIG configuration file.

WEBJAVADIR Absolute pathname of the Java and image files for the Oracle Tuxedo Administration Console on this server machine.


Table 6-3 Oracle Tuxedo Client-Only Environment Variables


WSENVFILE Tuxedo ATMI Workstation (/WS) client: Name of the file in which all environment variables are set for this workstation. There is no default for this variable.

TOBJADDR Tuxedo remote CORBA client: Address of the Tuxedo server machine’s listener; must match exactly (including case) the host and port specified for the server machine in the UBBCONFIG file.

Table 6-4 COBOL Environment Variables


COBCPY Directories that contain a set of the COBOL COPY files to be used by the compiler.

COBOPT Arguments that you may want to use on the compile command line.

Table 6-5 Java Environment Variables


JAVA_HOME Absolute pathname of the Java Development Kit (JDK) 1.5.x installation directory on this machine; needed to build and run Java applications on this machine.*

JDKDIR Set to JAVA_HOME value.

CLASSPATH Absolute pathnames to classes and Java archive files on this machine; needed to run Java applications on this machine.

* The Oracle Tuxedo 12c Release 1 (12.1.1) distribution does not include a JDK.


Set t ing Up Your Env i ronment

Setting Environment Variables on a Windows SystemOn a Windows 2003 server machine, you need to set the following environment variables shown in Table 6-6 to set up your environment:

Examples of TUXDIR, APPDIR, and TUXCONFIG are:

TUXDIR=C:\Oracle\tuxedo12cR1

APPDIR=C:\home\me\simpapp

TUXCONFIG=%APPDIR%\tuxconfig

The TUXDIR, APPDIR, and TUXCONFIG environment variables must match the values of the TUXDIR, APPDIR, and TUXCONFIG parameters in the MACHINES section of the UBBCONFIG file. As an alternative to setting environment variables from a command-line shell, use the Environment page of the Oracle Administration program, described in “Setting and Modifying Environment Variables” in Using Oracle Tuxedo ATMI on Windows.

Windows 2003 Server accesses the required dynamically loadable library files through its PATH variable setting. Specifically, Windows 2000 searches for dynamically loadable library files in the following order:

1. The directory from which the Oracle Tuxedo application was loaded

2. The current directory

3. The Windows system directory (for example, C:\WINDOWS\System32)

4. The Windows directory (for example, C:\WINDOWS)

5. The directories listed in the PATH environment variable

Table 6-6 Environment Variables

set TUXDIR=pathname_of_Oracle_Tuxedo_product_directory

set APPDIR=pathname_of_Oracle_Tuxedo_application_directory

set TUXCONFIG=pathname_of_TUXCONFIG_file

set WEBJAVADIR=%TUXDIR%\udataobj\webgui\java

set PATH=%APPDIR%;%TUXDIR%\bin;\bin;%PATH%




For more information about setting environment variables, see “Setting and Modifying Environment Variables” in Using Oracle Tuxedo ATMI on Windows.

Setting Environment Variables on a UNIX SystemOn a UNIX server machine, set and export the following environment variables shown in Table 6-7 to set up your environment:

Examples of TUXDIR, APPDIR, and TUXCONFIG are:

TUXDIR=/home/Oracle/tuxedo12cR1

APPDIR=/home/me/simpapp

TUXCONFIG=$APPDIR/tuxconfig

The TUXDIR, APPDIR, and TUXCONFIG environment variables must match the values of the TUXDIR, APPDIR, and TUXCONFIG parameters in the MACHINES section of the UBBCONFIG file. A Bourne shell script named tux.env, located in the Oracle Tuxedo product directory, serves as a model for setting these and other environment variables on a UNIX system.

Table 6-7 Environment Variables

TUXDIR=pathname_of_Oracle_Tuxedo_product_directory

APPDIR=pathname_of_Oracle_Tuxedo_application_directory

TUXCONFIG=pathname_of_TUXCONFIG_file

WEBJAVADIR=$TUXDIR/udataobj/webgui/java

PATH=$APPDIR:$TUXDIR/bin:/bin:$PATH

LD_LIBRARY_PATH=$APPDIR:$TUXDIR/lib:/lib:/usr/lib:$LD_LIBRARY_PATH

Note: For HP-UX systems only, use SHLIB_PATH instead of LD_LIBRARY_PATH. For AIX systems only, LIBPATH instead of LD_LIBRARY_PATH.

export TUXDIR APPDIR TUXCONFIG WEBJAVADIR PATH LD_LIBRARY_PATH




Star t ing the t l i s ten P rocess

Starting the tlisten ProcessYou, as the application administrator, must start a tlisten process on each machine of a networked Oracle Tuxedo application before the application is booted. The tlisten process enables you and the Oracle Tuxedo software running on the MASTER machine to start, shut down, and administer Oracle Tuxedo processes running on the non-MASTER machines. For example, tmboot(1) can start Oracle Tuxedo system servers on the non-MASTER machines. Generally, one tlisten process is required for each Oracle Tuxedo application running on a server machine.

In addition to the installer program starting a tlisten process on port 3050 during the installation of Oracle Tuxedo, a tlisten process may be started as shown in tlisten Process Table 6-8.

Table 6-8 tlisten Process

On This Machine . . . By This Administrator . . . Using This Method . . .

Windows 2003 server Oracle Tuxedo application administrator

Listener page of the Oracle Administration program; for details, see “Configuring tlisten Processes to Start Automatically” in Using Oracle Tuxedo ATMI on Windows

Manually starting a tlisten process from a command-line shell

UNIX server UNIX system administrator As part of a UNIX initialization (boot) script

Oracle Tuxedo application administrator

As a cron job

Manually starting a tlisten process from a command-line shell




tlisten InvocationIn all cases, the same basic syntax is used to invoke tlisten.

%TUXDIR%\bin\tlisten -l nlsaddr [-u appuid] (Windows) $TUXDIR/bin/tlisten [-d devname] -l nlsaddr [-u appuid] (UNIX)

The -l option is required. The argument to -l must match the value of the NLSADDR parameter in the NETWORK section of the UBBCONFIG file. For information on determining the value of NLSADDR, see reference page UBBCONFIG(5) in OracleTuxedo File Formats, Data Descriptions, MIBs, and System Processes Reference.

The value of devname is the device name of the network provider; for example, Starlan. If the tlisten process is operating with Sockets, the -d option is not needed.

The value of appuid is the user identifier (UID), or login name, of the Oracle Tuxedo application administrator. It must match the value of the UID parameter in the RESOURCES section of the UBBCONFIG file.

Note: To obtain the UID on a UNIX system, run the id command.

On a UNIX machine, use the -u appuid option when the command is part of an installation script run by user root to run the tlisten process with the effective UID of the owner of the Oracle Tuxedo software installation on this machine. If tlisten is started by the Oracle Tuxedo application administrator, either as a cron job or manually, the -u option is unnecessary since the job is already owned by the correct account.

For more information about the tlisten command, see reference page tlisten(1) in Oracle Tuxedo Command Reference. For details on starting the tlisten process on a Windows 2003 server machine, see “Configuring tlisten Processes to Start Automatically” in Using Oracle Tuxedo ATMI on Windows.

tlisten PasswordOracle Tuxedo uses the administrative password that you specified during the installation to protect the machine on which Oracle Tuxedo is installed from administrative requests and operations (such as tmboot(1)) that are not authorized. Whenever administrative communications arrive on this machine through tlisten(1) or wlisten(1) gateway processes, Oracle Tuxedo authenticates them by means of the password.

A tlisten password must be a string of alphanumeric characters in clear-text format. It may contain no more than 80 characters.



http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/rfcm/rfcmd.html


Ed i t ing a UBBCONF IG F i l e

A common password is required for two machines in a Oracle Tuxedo application to communicate successfully. For this reason, you must use the same password whenever you install Oracle Tuxedo on multiple machines for a single application. If during the Oracle Tuxedo installation process you use a different password for one machine, you must add that password using the tlistpwd(1)$TUXDIR utility to the tlisten.pw file on each machine that communicates with eachother.

For these reasons, you may have more than one administrative password in your tlisten.pw file. A single password file may contain no more than 20 passwords, with one password per line.

Note: The tlisten.pw file is system-encrypted. To add or change passwords, you must use the tlistpwd(1) utility.

Editing a UBBCONFIG FileEach Oracle Tuxedo application is controlled by a configuration file in which installation-dependent parameters are defined. In the Oracle Tuxedo documentation, this file is referred to as UBBCONFIG, but you can give your configuration file any name you like as long as the content of the file conforms to the format described in reference page UBBCONFIG(5) in OracleTuxedo File Formats, Data Descriptions, MIBs, and System Processes Reference. Typical configuration filenames begin with the string ubb, followed by a mnemonic string, such as simple in the filename ubbsimple.

As an example, consider ubbsimple, the UBBCONFIG file for the rudimentary ATMI-based simpapp application delivered with the Oracle Tuxedo installation. On a Windows system, this application is found in the directory %TUXDIR%\samples\atmi\simpapp; on a UNIX system, it is found in the directory $TUXDIR/samples/atmi/simpapp.

Listing 6-1 shows an example ubbsimple file. The example has been modified from the ubbsimple file delivered on a Windows or UNIX system to include example pathname values for both Windows and UNIX systems.

Listing 6-1 ubbsimple for the ATMI-based simpapp Application

#ident “@(#)apps:simpapp/ubbsimple $Revision: 1.3 $ #Skeleton UBBCONFIG file for the Tuxedo Simple Application. #Replace the <bracketed> items with the appropriate values. *RESOURCES IPCKEY <Replace with a valid IPC Key>


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/rfcm/rfcmd.html

#Example: #IPCKEY 123456 DOMAINID simpapp MASTER simple MAXACCESSERS 10 MAXSERVERS 5 MAXSERVICES 10 MODEL SHM LDBAL N *MACHINES DEFAULT: APPDIR=“<Replace with the current directory pathname>” TUXCONFIG=“<Replace with your TUXCONFIG Pathname>” TUXDIR=“<Directory where Tuxedo is installed>” #Windows #Example: # APPDIR=“C:\home\me\simpapp” # TUXCONFIG=“C:\home\me\simpapp\tuxconfig” # TUXDIR=“C:\oracle\tuxedo12cR1”

#UNIX #Example: # APPDIR=“/home/me/simpapp” # TUXCONFIG=“/home/me/simpapp/tuxconfig” # TUXDIR=“/home/oracle/tuxedo12cR1”

<Machine-name> LMID=simple #Example: #beatux LMID=simple *GROUPS GROUP1 LMID=simple GRPNO=1 OPENINFO=NONE *SERVERS DEFAULT: CLOPT=“-A” simpserv SRVGRP=GROUP1 SRVID=1 *SERVICES TOUPPER

Ed i t ing a UBBCONF IG F i l e

In the configuration file for your application, you must replace the strings enclosed in angle brackets with values specific to your application. Listing 6-9 provides a sample of the parameters that must be defined in every configuration file.

You must define APPDIR, TUXCONFIG, and TUXDIR for every machine in your Oracle Tuxedo application. If you need to look up other parameters when editing your UBBCONFIG file, see reference page UBBCONFIG(5) in OracleTuxedo File Formats, Data Descriptions, MIBs, and System Processes Reference.

You must edit your UBBCONFIG file before running tmloadcf(1) to verify the IPC requirements in the section that follows. If you run tmloadcf without first editing the UBBCONFIG file, the command will fail with syntax errors.

Table 6-9 Parameter Sample

This Parameter . . . Specifies . . .

IPCKEY A numeric key that identifies the shared memory segment where the structures used by your application are located. The value must be greater than 32,768 and less than 262,143.

machine_name The node name of the machine. To obtain the node name on a Windows 2003 Server system, see your system administrator. To obtain the node name on a UNIX system, run the uname -n command.

APPDIR = string A list of one or more directories in which application and administrative servers will be booted on this machine.

For Windows, the value of string is the absolute pathname of one directory, optionally followed by a semicolon-separated list of pathnames for other directories on the machine being defined.

For UNIX, the value of string is the absolute pathname of one directory, optionally followed by a colon-separated list of pathnames for other directories on the machine being defined.

TUXCONFIG = string The absolute pathname of the device or system file where the binary TUXCONFIG file is to be created on this machine. The TUXCONFIG file is created by running the tmloadcf(1) command on the UBBCONFIG file.

TUXDIR = string The absolute pathname of the product directory of the Oracle Tuxedo software on this machine.



Using the TYPE Parameter in UBBCONFIGThe TYPE parameter in the MACHINES section of a configuration file specifies the invocation of the External Data Representation (XDR) encode/decode routines when messages are passed between unlike machines. The term “unlike” applies even to machines of the same type if the compiler on each machine is different. In such a case, give each machine a unique TYPE string to force every message to go through the encode/decode routines.

Checking IPC RequirementsThe Oracle Tuxedo system uses interprocess communications (IPC) resources heavily. On many systems, the default values for the parameters that control the size and quantity of the various IPC resources are below the minimums needed to run even a modest Oracle Tuxedo application. Therefore, you may need to reset some parameters. After editing your UBBCONFIG file, you should determine whether you have enough IPC resources for your application.

To perform this task, enter the following tmloadcf(1) command, specifying your edited UBBCONFIG file as input:

tmloadcf -c UBBCONFIG

With the -c option, the tmloadcf program prints a list of the minimum IPC resources required for your application, but does not create or update the TUXCONFIG file.

Listing 6-2 is an output report based on the values in ubbsimple.

Listing 6-2 Output Produced by tmloadcf -c

Ipc sizing (minimum /T values only)... Fixed Minimums Per Processor SHMMIN: 1 SHMALL: 1 SEMMAP: SEMMNI Variable Minimums Per Processor SEMUME, A SHMMAX SEMMNU, * * Node SEMMNS SEMMSL SEMMSL SEMMNI MSGMNI MSGMAP SHMSEG ------ ------ ------ ------ ------ ------ ------ ------ sftuxe 17 5 12 A + 1 13 26 75K where 1 <= A <= 8.

Creat ing the Un ive rsa l Dev ice L is t and the T ransact ion Log

The number of expected application clients per processor should be added to each MSGMNI value.

The output report identifies IPC resources by their traditional UNIX names. To map the traditional names to the names specific to a UNIX platform, see the data sheet for that platform in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. To map the traditional names to the names specific to the Windows 2003 Server platform, see the table titled “IPC Resource Name Mappings Between Windows and UNIX Systems” in Using Oracle Tuxedo ATMI on Windows.

The example output report indicates that to run simpapp, your system must have SEMUME, SEMMNU, and SEMMNS set to no less than 17. SEMMSL must be at least 5, and SEMMNI and SEMMAP at least 4 (assuming the value of A is 3). MSGMNI must be at least 13, and MSGMAP at least 26. Finally, the product of SHMMAX and SHMSEG must be at least 75K bytes.

The IPC values are application-dependent, and the numbers in this example reflect a very small configuration. If other client or server applications that use IPC resources are running on the same system with a Oracle Tuxedo application, then the requirements of both applications must be satisfied. Keep in mind also that every machine participating in an application must have sufficient IPC resources available.

If the current IPC resources are inadequate, you must increase the values of the associated IPC parameters. For instructions on changing the current IPC values for a Windows 2003 Server system, see “Configuring IPC Resources to Maximize System Performance” in Using Oracle Tuxedo ATMI on Windows. For instructions on changing the current IPC values for a UNIX system, see the data sheet for your platform in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

Creating the Universal Device List and the Transaction Log

You create the Universal Device List (UDL) and define a UDL entry for the global transaction log (TLOG) on each machine in your application that will use global transactions. The TLOG is a log file in which information about transactions is kept until the transaction is completed.




Defining the TLOGBefore creating the UDL and defining UDL entries for TLOG, you must set the following parameters in the MACHINES section of the UBBCONFIG file for each machine in your application that will use global transactions.

Table 6-10 lists the parameters.

Because the TLOG seldom needs to be larger than 100 blocks (pages) and because disk partitions are always substantially larger than that, it may make sense to use the same device for both the TUXCONFIG file and the TLOG. If so, the pathname of the device needs to be specified by both the TUXCONFIG and the FSCONFIG environment variables.

Creating the UDL and UDL Entries for TLOGYou must manually create a UDL entry for the TLOGDEVICE on each machine where a TLOG is needed. You may create these entries either before or after you have loaded TUXCONFIG, but you must create these entries before booting the application.

To access the create device list command, crdl, you invoke tmadmin -c with the application inactive. The -c option invokes tmadmin in configuration mode.

To create the UDL and a UDL entry for TLOG on each machine in your application that will use global transactions, follow these steps:

Table 6-10 Parameter

This Parameter . . . Specifies . . .

TLOGDEVICE = string The Oracle Tuxedo filesystem containing the distributed transaction processing (DTP) TLOG for this machine. If not specified, it is assumed that this machine has no TLOG.

TLOGOFFSET = offset The numeric offset in pages (from the beginning of the device) to the start of the Oracle Tuxedo filesystem containing the DTP transaction log for this machine. The default is 0.

TLOGNAME = string The name of the DTP transaction log for this machine. If not specified, the default is “TLOG.”

TLOGSIZE = size The numeric size, in pages, of the DTP transaction log for this machine. If not specified, the default is 100 pages.


Running s impapp to Ver i f y Your Ins ta l la t ion

1. Log in as the application administrator on the MASTER machine.

2. Enter the following command:

tmadmin -c crdl -z config -b blocks

Here -z config specifies the full pathname of the device on which the UDL should be created (that is, where the TLOG will reside), and -b blocks specifies the number of blocks to be allocated on the device. The value of config should match the value of the TLOGDEVICE parameter in the MACHINES section of the UBBCONFIG file. The blocks must be larger than the value of TLOGSIZE. If -z is not specified, the value of config defaults to the value of the FSCONFIG environment variable.

3. Log in as the application administrator on each remaining non-MASTER machine that will use global transactions and repeat step 2.

If the TLOGDEVICE is mirrored between two machines, step 3 is not required on the paired machine. To be recoverable, the TLOG should reside on a device that can be mirrored.

Running simpapp to Verify Your InstallationOne of the ways to verify that your Oracle Tuxedo software is installed correctly is to run one or more of the sample applications included with the installation. The sample applications demonstrate the capabilities of the ATMI and CORBA clients, and the ATMI and CORBA C++ servers.

The following sections provide procedures for verifying both the ATMI and CORBA C++ parts of your Oracle Tuxedo installation:

Running simpapp to Verify the Oracle Tuxedo ATMI Software Installation

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software Installation

The simpapp application is a non-distributed application, meaning that it runs on a single machine. It is designed so that it can be up and running within minutes after the Oracle Tuxedo software is installed.

The simpapp application offers a single service called TOUPPER, which converts strings from lowercase to uppercase. The client is invoked with a single argument: a lowercase string to be converted to uppercase. The server returns the converted string to the client, and the client prints the converted string.

For example, the invocation


simpcl “hello world”

results in the output

Returned string is: HELLO WORLD

Two versions of simpapp exist: an ATMI version and a CORBA version. The ATMI version consists of an ATMI server, an ATMI client, and a UBBCONFIG file. The CORBA version consists of a CORBA C++ server, a CORBA C++ client.

Running simpapp to Verify the Oracle Tuxedo ATMI Software InstallationTo verify that you have successfully installed the Oracle Tuxedo ATMI software on your system, run the ATMI version of the simpapp application, which on a Windows system can be found in the directory %TUXDIR%\samples\atmi\simpapp, and on a UNIX system can be found in the directory $TUXDIR/samples/atmi/simpapp.

Note: Samples are not installed unless they are selected to be installed during Tuxedo 12cR1 installation.

The procedure presented in the following two sections is also provided in the README file in the simpapp directory, and in “Tutorial for simpapp, a Simple C Application” in Tutorials for Developing Oracle Tuxedo ATMI Applications.

Running simpapp to Verify the Oracle Tuxedo ATMI Software Installation on a Windows SystemTo configure and run the ATMI version of simpapp on a Windows system, follow these steps:

1. Log in to the target machine as the Administrator or as a member of the Administrator group and open a command-line shell.

2. Create a working directory for your sample application and change to it:

cd C:\home\me mkdir atmi cd atmi

3. Set the environment variables used by the Oracle Tuxedo system, as explained in “Setting Environment Variables on a Windows System” on page 6-11. Set APPDIR and TUXCONFIG as follows:

set APPDIR=C:\home\me\atmi set TUXCONFIG=%APPDIR%\tuxconfig


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/tutor/tutsi.html


Note: You do not have to set the WEBJAVADIR environment variable.

4. Copy the simpapp files to your working directory. You will need to edit one of them: the configuration file, ubbsimple. Check the permissions on all the files in your working directory and, if necessary, change the permissions to allow full access. For example:

copy %TUXDIR%\samples\atmi\simpapp\*.* *.* attrib -R /S *.*

5. Compile the simpapp client and server programs by entering the following commands:

buildclient -o simpcl -f simpcl.c buildserver -o simpserv -f simpserv.c -s TOUPPER

6. In the sample configuration file, ubbsimple, replace the strings shown in angle brackets with values appropriate to your Oracle Tuxedo system installation. Comments in ubbsimple explain how to customize the file. Set the following parameters in the ubbsimple file:

– Set IPCKEY to a valid IPC key. This value must be greater than 32,768 and less than 262,143.

– Set APPDIR to ”C:\home\me\atmi”.

– Set TUXCONFIG to the literal pathname corresponding to $APPDIR/tuxconfig (in our example, ”C:\home\me\atmi\tuxconfig”).

– Set TUXDIR to the absolute pathname of the product directory of the Oracle Tuxedo software on this machine (for example, ”C:\oracle\tuxedo12cR1”).

– Set MACHINE-NAME to the name of your system. MACHINE-NAME must be entered in uppercase letters on a Windows system.

Note: The APPDIR, TUXCONFIG, and TUXDIR parameter settings in the ubbsimple file must match the APPDIR, TUXCONFIG, and TUXDIR environment variable settings.

7. Create the binary version of your edited configuration file by invoking tmloadcf(1), which produces a file named tuxconfig. This file, referenced by the TUXCONFIG environment variable, provides the Oracle Tuxedo system with a description of the application configuration at run time:

tmloadcf -y ubbsimple

8. Boot simpapp by typing the following command:

tmboot -y

If the boot succeeds, output similar to the following appears and you can proceed to step 10.


Listing 6-3 shows the output produced by tmboot -y.

Listing 6-3 Output Produced by tmboot -y

Booting all admin and server processes in C:\home\me\atmi\tuxconfig INFO: Oracle Tuxedo(r) System Release 10.3.0.0 INFO: Serial #: 000102-9125503751, Maxusers 25 Booting admin processes ... exec BBL -A: process id=24180 ... Started. Booting server processes ... exec simpserv -A : process id=24181 ... Started. 2 processes started.

9. If the boot fails, examine the log named ULOG.mmddyy in your application directory (%APPDIR%, C:\home\me\atmi). The string mmddyy is a placeholder for the date (digits representing the current month, day, and year) that will make up the end of the filename. If you see a message such as the following, near the end of the log

can’t create enough semaphores for BB

then the interprocess communication (IPC) resources configured in your operating system are not adequate for running simpapp.

To confirm this hypothesis, invoke the Oracle Tuxedo system command tmloadcf(1) and specify the name of your configuration file, as shown in the following example:

tmloadcf -c %APPDIR%\ubbsimple

If the current value of any IPC parameter configured in your operating system is less than a minimum (either variable or fixed) listed in the tmloadcf output, you must increase the value of that parameter. For instructions on determining and changing the current IPC values for your platform, see “Configuring IPC Resources to Maximize System Performance” in Using Oracle Tuxedo ATMI on Windows.

10. If the boot succeeded, you can invoke the client. For example, enter the following command:


The following is displayed:






11. When you have finished, shut down simpapp with the following command:

tmshutdown -y

Running simpapp to Verify the Oracle Tuxedo ATMI Software Installation on a UNIX SystemTo configure and run the ATMI version of simpapp on a UNIX system, follow these steps:

1. Log in to the target machine as the Oracle Tuxedo application administrator and open a command-line shell.


cd /home/me mkdir atmi cd atmi

3. Set and export the environment variables used by the Oracle Tuxedo system, as explained in “Setting Environment Variables on a UNIX System” on page 6-12. Set APPDIR and TUXCONFIG as follows:

APPDIR=/home/me/atmi TUXCONFIG=$APPDIR/tuxconfig export APPDIR TUXCONFIG

Note: You do not have to set the WEBJAVADIR environment variable.

4. Copy the simpapp files to your working directory. You will need to edit one of them: the configuration file, ubbsimple. Make sure that the client and server files, simpcl and simpserv, are executable, and that the configuration file, ubbsimple, is writable. For example:

cp $TUXDIR/samples/atmi/simpapp/* . chmod 755 simpserv simpcl chmod 644 ubbsimple

5. Compile the simpapp client and server programs by entering the following commands:

buildclient -o simpcl -f simpcl.c buildserver -o simpserv -f simpserv.c -s TOUPPER

6. In the sample configuration file, ubbsimple, replace the strings shown in angle brackets with values appropriate to your Oracle Tuxedo system installation. Comments in ubbsimple explain how to customize the file. Set the following parameters in the ubbsimple file:


– Set IPCKEY to a valid IPC key. This value must be greater than 32,768 and less than 262,143.

– Set APPDIR to ”/home/me/atmi”.

– Set TUXCONFIG to the literal pathname corresponding to $APPDIR/tuxconfig (in our example, ”/home/me/atmi/tuxconfig”).

– Set TUXDIR to the absolute pathname of the product directory of the Oracle Tuxedo software on this machine (for example, ”/home/oracle/tuxedo12cR1”).

– Set MACHINE-NAME to the name of your system.

To determine the name of your system on a UNIX machine enter the command:

uname -n

Note: The APPDIR, TUXCONFIG, and TUXDIR parameter settings in the ubbsimple file must match the APPDIR, TUXCONFIG, and TUXDIR environment variable settings.

7. Create the binary version of your edited configuration file by invoking tmloadcf(1), which produces a file named tuxconfig. This file, referenced by the TUXCONFIG environment variable, provides the Oracle Tuxedo system with a description of the application configuration at run time:

tmloadcf -y ubbsimple

8. Boot simpapp by typing the following command:

tmboot -y

If the boot succeeds, output similar to the following appears and you can proceed to step 10.

Listing 6-4 shows the output produced by tmboot -y.

Listing 6-4 Output Produced by tmboot -y

Booting all admin and server processes in /home/me/atmi/tuxconfig INFO: Oracle Tuxedo(r) System Release 10.3.0.0 INFO: Serial #: 000102-9125503751, Maxusers 25 Booting admin processes ... exec BBL -A: process id=24180 ... Started. Booting server processes ... exec simpserv -A :



process id=24181 ... Started. 2 processes started.

9. If the boot fails, examine the log named ULOG.mmddyy in your application directory ($APPDIR, /home/me/atmi). The string mmddyy is a placeholder for the date (digits representing the current month, day, and year) that will make up the end of the filename. If you see a message such as the following, near the end of the log

can’t create enough semaphores for BB

then the interprocess communication (IPC) resources configured in your operating system are not adequate for running simpapp.

To confirm this hypothesis, invoke the Oracle Tuxedo system command tmloadcf(1) and specify the name of your configuration file, as shown in the following example:

tmloadcf -c $APPDIR/ubbsimple

If the current value of any IPC parameter configured in your operating system is less than a minimum (either variable or fixed) listed in the tmloadcf output, you must increase the value of that parameter. For instructions on determining and changing the current IPC values for your platform, see the data sheet for your platform in “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.

10. If the boot succeeded, you can invoke the client. For example, enter the following command:


The following is displayed:


11. When you have finished, shut down simpapp with the following command:

tmshutdown -y

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software InstallationTo verify that you have successfully installed the Oracle Tuxedo CORBA C++ software on your system, run the CORBA version of the simpapp application, which on a Windows system can be found in the directory %TUXDIR%\samples\corba\simpapp, and on a UNIX system can be found in the directory $TUXDIR/samples/corba/simpapp. The procedure presented in the following two sections is also provided in the README file in the simpapp directory, and in


“Tutorial for simpapp, a Simple C Application” in Tutorials for Developing Oracle Tuxedo ATMI Applications.

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software Installation on a Windows SystemTo configure and run the CORBA version of simpapp on a Windows system, follow these steps:

1. Log in to the target machine as the Administrator or as a member of the Administrator group and open a command-line shell.


cd C:\home\me mkdir corba cd corba

3. Make sure that the product directory in which you installed the Oracle Tuxedo software is set in the TUXDIR environment variable. For example, if you installed the software in the C:\oracle\tuxedo12cR1 directory, set TUXCONFIG as follows:

set TUXDIR=C:\oracle\tuxedo12cR1

4. Copy the simpapp files to your working directory and change the permissions on all files to allow full access. For example:

copy %TUXDIR%\samples\corba\simpapp\*.* *.* attrib -R /S *.*

5. Ensure that nmake is in your path.

6. To run simpapp automatically, enter runme. The simpapp application runs and prints the following messages:

Testing simpapp cleaned up prepared built loaded ubb booted ran shutdown saved results PASSED


http://download.oracle.com/docs/cd/E35855_01/tuxedo/docs12c/tutor/tutsi.html


7. To run the sample manually to observe the simpapp processes starting and stopping, follow these steps:

a. Enter results\setenv.

b. Enter tmboot -y. The application starts several processes.

c. Enter simple_client. The prompt String? appears.

d. Enter a word in lowercase letters. The application converts the word to uppercase and then to lowercase letters.

e. Enter tmshutdown -y. The application shuts down the processes.

8. To restore the directory to its original state, perform these steps:

a. results\setenv

b. nmake -f makefile.nt clean

Running simpapp to Verify the Oracle Tuxedo CORBA C++ Software Installation on a UNIX SystemTo configure and run the CORBA version of simpapp on a UNIX system, follow these steps:

1. Log in to the target machine as the Oracle Tuxedo application administrator and open a command-line shell.


prompt> cd /home/me prompt> mkdir corba prompt> cd corba

3. Make sure that the product directory in which you installed the Oracle Tuxedo software is set in the TUXDIR environment variable. For example, if you installed the software in the /home/oracle/tuxedo12cR1 directory, set and export TUXCONFIG as follows:

prompt> TUXDIR=/home/oracle/tuxedo12cR1 prompt> export TUXDIR

4. Copy the simpapp files to your working directory and change the permissions on all files to allow full access. For example:

prompt> cp $TUXDIR/samples/corba/simpapp/* . prompt> chmod 777 *

5. Ensure that make is in your path.


6. To run simpapp automatically, enter ../runme.ksh. The simpapp application runs and prints the following messages:Testing simpapp cleaned up prepared built loaded ubb booted ran shutdown saved results PASSED

7. To run simpapp manually to observe the processes starting and stopping, follow these steps:

a. prompt> ksh

b. prompt> ../results/setenv.ksh

c. prompt> tmboot -y

The application starts several processes.

d. prompt> simple_client

The prompt String? is displayed.

e. prompt> enter_a_word_in_lowercase_letters

The application converts the word to uppercase and then to lowercase letters and displays the results.

f. prompt> tmshutdown -y

g. The application shuts down the processes.

8. To restore the directory to its original state, follow these steps:

a. prompt> ../results/setenv.ksh

b. prompt> make -f makefile.mk clean


Running bu i ld tms fo r Orac le Tuxedo App l i cat ions That Use XA Resource Managers

Running buildtms for Oracle Tuxedo Applications That Use XA Resource Managers

For Oracle Tuxedo applications that use distributed transactions and XA-compliant resource managers, you must use the buildtms command to construct a transaction manager server load module. This requirement exists on Windows 2003 Server and UNIX systems. When the module has been created, it must reside in %TUXDIR%\bin on Windows 2003 Server systems, or $TUXDIR/bin on UNIX systems.

If you run the CORBA C++ University sample applications, each sample’s makefile creates the TMS load module for you and calls it tms_ora.exe. Therefore, running buildtms as a separate step is necessary only if you do not plan to run any of these sample applications.

For information about the buildtms command with Oracle Tuxedo applications, see reference page buildtms(1) in Oracle Tuxedo Command Reference.

Uninstalling Oracle TuxedoUninstalling Oracle Tuxedo12c Release 1 (12.1.1), 10.0, 9.1, 9.0, 8.1 or 8.0 does not remove the Oracle Home directory associated with the installation but does remove all Oracle Tuxedo components installed by the installer program. The uninstallation also removes the product directory associated with the installation unless one of the following is true:

The product directory contains customer-created configuration or application files—the uninstallation does not delete customer-created configuration or application files.

The uninstall was invoked from within the product directory structure—specifically, within the uninstaller directory.

To uninstall Oracle Tuxedo 12c Release 1 (12.1.1), complete the procedures for the appropriate platform, provided in Table 6-11. To uninstall Oracle Tuxedo 9.1 or 10.0, substitute “Tuxedo 9.1 or 10.0” for “Tuxedo 12c Release 1 (12.1.1)” in Table 6-11.


Reinstalling Oracle TuxedoWhen you start the Oracle Tuxedo Installation program on system that already has a copy of Oracle Tuxedo installed, the installation program detects the existing Oracle Tuxedo home directory and asks if you want to:

Table 6-11 Uninstall Oracle Tuxedo

To Uninstall Oracle Tuxedo on This Platform . . .

Perform the Following Procedure . . .

Windows 1. Shut down any Oracle Tuxedo servers that are running. For instructions on using the tmshutdown command to shut down Oracle Tuxedo applications, see reference page tmshutdown(1) in Oracle Tuxedo Command Reference.

2. From the Windows Start menu, choose Start → Programs → Oracle WebLogic E-Business Platform → Tuxedo 12c Release 1 (12.1.1) → uninstall.

The Oracle Installation program Uninstaller window appears.3. Click Uninstall to start the uninstall program. 4. Click Exit in the Uninstall Complete window.

UNIX 1. Shut down any Oracle Tuxedo servers that are running. For instructions on using the tmshutdown command to shut down Oracle Tuxedo applications, see reference page tmshutdown(1) in Oracle Tuxedo Command Reference.

2. Go to the tux_prod_dir/uninstaller directory, where tux_prod_dir represents the product directory in which you installed the Oracle Tuxedo software.

3. Choose one of two methods for uninstalling the software:

– To use the GUI-mode installation program, go to step 4.

– To use the console-mode procedure, go to step 5.4. (GUI-mode method) Enter the sh Uninstall_Tuxedo_12.1.1.0 command

at the prompt. In the Uninstaller window, click Uninstall to start the uninstall program, then click Exit in the Uninstall Complete window to complete the uninstallation.

5. (Console-mode method) Enter the sh Uninstall_Tuxedo_12.1.1.0 -i console command at the prompt. When the uninstall process is complete, press Enter to exit the uninstaller.


Reinsta l l ing Orac le Tuxedo

Copy the new installation directory over the existing one

Create a new installation directory

Table 6-12 shows the reinstallation screen.

Table 6-12 Reinstalling Oracle Tuxedo

Click . . . To . . .

Continue Close the warning window and continue with the installation. This option overwrites the previous installation.

Cancel Return to the Choose Oracle Home Directory window. To continue installing the software using a different Oracle Home directory, select an existing Oracle Home directory that does not contain the release 12c Release 1 (12.1.1) software or create a new Oracle Home directory.

Exit Exit the installation program and uninstall the previous installation. You can invoke the uninstall program as described in “Uninstalling Oracle Tuxedo” on page 6-31, and reinstall the software as described in one of the following:• “Installing Oracle Tuxedo Using GUI-Mode Installation” on

page 2-1• “Installing Oracle Tuxedo on UNIX Systems Using

Console-Mode Installation” on page 3-1• “Installing Oracle Tuxedo Using Silent Installation” on

page 4-1


A P P E N D I X A

Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets

The following sections provide platform-specific information for the platforms on which the Oracle Tuxedo 12c Release 1 (12.1.1) system software is supported:

Supported Platforms

– Platform Support Policy

Supported Platform Data Sheets

– HP-UX 11i v3 (32-bit) on Itanium 64-bit

– HP-UX 11i v3 (64-bit) on Itanium

– IBM AIX 6.1 (64-bit) on IBM PowerPC

– IBM AIX 7.1 (64-bit) on IBM PowerPC

– Novell SUSE Linux Enterprise Server 11 (64-bit) on x86-64

– Oracle Linux 5.6 (32-bit) on x86

– Oracle Linux 5.4 (64-bit) on x86-64




– Oracle Linux 5.6 (64-bit) on Exalogic 2.0

– Oracle Linux 5.8 (64-bit) on Exalogic 2.0

Installing the Oracle Tuxedo System A-1

– Oracle Solaris 10 (64-bit) on x86-64

– Oracle Solaris 10 (32-bit) on SPARC


– Oracle Solaris 11 (64-bit) on x86-64

– Oracle Solaris 11 Express (64-bit) on x86-64


– Red Hat Enterprise Linux 5.6 (32-bit) on x86

– Red Hat Enterprise Linux 5.4 (64-bit) on x86-64





– Red Hat Enterprise Linux 6.3 (64-bit) on s390x

– Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition

– Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition

– Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition

– Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition

– Microsoft Windows 7 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2010 Professional Edition


– Microsoft Windows 7 (32-bit) (Client Only) on x86 with MS Visual Studio 2010



A-2 Installing the Oracle Tuxedo System

Suppor ted P la t fo rms

Supported Platforms

Vendor Operating System Release/Version

HP HP-UX HP-UX 11i v3 (32-bit) on Itanium 64-bit

HP-UX 11i v3 (64-bit) on Itanium

IBM AIX IBM AIX 6.1 (64-bit) on IBM PowerPC

IBM AIX IBM AIX 7.1 (64-bit) on IBM PowerPC

Microsoft Windows Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition

Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition

Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition


Microsoft Windows 7 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2010 Professional Edition


Microsoft Windows 7 (32-bit) (Client Only) on x86 with MS Visual Studio 2010



Novell Linux Novell SUSE Linux Enterprise Server 11 (64-bit) on x86-64


Note: Oracle Jolt 12c Release 1 (12.1.1) and Oracle SNMP Agent 12c Release 1 (12.1.1) are supported on the same platforms that are supported by Oracle Tuxedo 12c Release 1 (12.1.1).

Oracle Linux Oracle Linux 5.6 (64-bit) on Exalogic 2.0

Oracle Linux 5.8 (64-bit) on Exalogic 2.0

Oracle Linux 5.6 (32-bit) on x86

Oracle Linux 5.4 (64-bit) on x86-64




Solaris Oracle Solaris 10 (64-bit) on x86-64

Oracle Solaris 10 (32-bit) on SPARC


Oracle Solaris 11 (64-bit) on x86-64

Oracle Solaris 11 Express (64-bit) on x86-64


Red Hat Linux Red Hat Enterprise Linux 5.6 (32-bit) on x86

Red Hat Enterprise Linux 5.4 (64-bit) on x86-64





Red Hat Enterprise Linux 6.3 (64-bit) on s390x

Vendor Operating System Release/Version



A data sheet is provided for each platform. Each data sheet includes the following platform-specific information:

A list of available Oracle Tuxedo install sets

Hardware, software, network, and disk space requirements

Tunable parameters

Platform Support PolicyThe Oracle policy of operating system platform support for Oracle Tuxedo and related products is as follows:

x86 or x86-64 denotes various CPUs based on x86 or x86-64 architecture.

Oracle Tuxedo 32-bit binaries are supported on 64-bit operating systems, such as on Solaris, AIX and Windows. This support is based on OS vendor compatibility assurance that 32-bit applications can run on 64-bit OS without any changes. For more 32-bit application support on 64-bit OS information, please refer to respective OS vendor documentation.

The virtualization software environments provided by Oracle including OVM, OVM for SPARC (aka LDOMS) and VirtualBox are supported.

Oracle Tuxedo is also considered supported in virtualization software environments provided by the operating system vendor (such as AIX6 WPARs). Even though Oracle has performed limited testing in these environments, the support is based on the OS vendor compatibility statement that software applications will run in a virtualization software environment without any changes.

Other virtualization software environments such as VMware, are also considered supported, provided that the virtualization software environment is supported by the operating system vendor and the support criteria specified in the operating system data sheets are met.

For more information, see Supported Platform Data Sheets.

The Oracle policy is that when the operating system provider discontinues supporting a specific release, Oracle support is also discontinued.

Oracle will not be able to notify customers and users when support for a specific operating system release is discontinued. As a user of the operating system release, we expect you to find out from the operating system provider of discontinued support and plan accordingly.


All minor releases of a certified OS version are supported with the assumption that OS vendor maintains binary compatibility. For example, if Tuxedo 12.1.1 is certified on RedHat Enterprise Linux 6.1, RedHat Enterprise Linux 6.x are supported with the assumption that RedHat will maintain binary compatibility among all minor versions of release 6.

Platform End of Life Expectancy TableThe following is the End-of Life expectancy table for Oracle Tuxedo 12c Release 1 (12.1.1) supported platforms.

Note: OS EOL dates may have changed since time of this publication. Check with vendor for current OS EOL dates.

Platforms Release Date OS EOL Date

HP-UX 11i v3 (32-bit) on Itanium 64-bit 2012.11.27 TBD

HP-UX 11i v3 (64-bit) on Itanium 2012.11.27 TBD

IBM AIX 6.1 (64-bit) on IBM PowerPC 2012.06.29 TBD

IBM AIX 7.1 (64-bit) on IBM PowerPC 2012.06.29 TBD

Novell SUSE Linux Enterprise Server 11 (64-bit) on x86-64

2012.06.29 TBD

Oracle Linux 5.6 (32-bit) on x86 2013.06.28 TBD

Oracle Linux 5.4 (64-bit) on x86-64 2014.01.09 TBD




Oracle Linux 5.6 (64-bit) on Exalogic 2.0 2012.06.29 TBD

Oracle Linux 5.8 (64-bit) on Exalogic 2.0 2013.05.23 TBD

Oracle Solaris 10 (32-bit) on SPARC 2013.12.31 TBD

Oracle Solaris 10 (64-bit) on x86-64 2012.06.29 TBD




Oracle Solaris 11 (64-bit) on x86-64 2012.06.29 TBD

Oracle Solaris 11 Express (64-bit) on x86-64 2012.11.16 TBD


Red Hat Enterprise Linux 5.6 (32-bit) on x86 2013.07.29 TBD

Red Hat Enterprise Linux 5.4 (64-bit) on x86-64 2014.01.09 TBD





Red Hat Enterprise Linux 6.3 (64-bit) on s390x 2013.06.28 TBD


2012.7.19 TBD


2013.05.31 TBD


2013.01.28 TBD


2013.05.31 TBD


2012.7.19 TBD


2013.05.31 TBD

Microsoft Windows 7 (32-bit) (Client Only) on x86 with MS Visual Studio 2010

2013.02.01 TBD


2012.12.17 TBD


2013.05.31 TBD


EOL information for all Oracle products can be found at:

http://www.oracle.com/support/library/brochure/lifetime-support-middleware.pdf.

Tunable ParametersYou probably need to reconfigure the platform kernel before running Oracle Tuxedo software because the default values of some tunable parameters are too low.

To adjust the tunable parameters, follow these steps:

1. Determine whether the current values are adequate.

For instructions about determining whether the current tunable parameter values are adequate, see "IPC Resource Configuration on a UNIX System" and "Checking IPC Requirements".

2. Reset the tunable parameters as necessary.

Supported Platform Data Sheets

HP-UX 11i v3 (32-bit) on Itanium 64-bitThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for HP-UX 11i v3 (32-bit) system on Itanium 64-bit.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for HP-UX 11i v3 (32-bit) on Itanium 64-bit

Full install set

Server install set

Full client install set

ATMI client install set

CORBA client install set

Jolt client install set

For descriptions of Oracle Tuxedo install sets, see Install Sets.


http://www.oracle.com/support/library/brochure/lifetime-support-middleware.pdf

../install/insappd.html

Suppor ted P lat fo rm Data Sheets

Hardware Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bitIntel Itanium (64-bit)

1 GB of RAM minimum

At least 4MB RAM for each Oracle Tuxedo system server

Software Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bit

Additional Notes

If you are using the Oracle Tuxedo IPv6 feature with Oracle JOLT, you must enable java.net.preferIPv6Addresses and disable java.net.preferIPv4Stack using the following java arguments at the same time:

– Djava.net.preferIPv6Addresses=true

– Djava.net.preferIPv4Stack=false

ATMI users need a C, C++ or COBOL compiler.


OS Version (Patches) HP-UX B.11.31 ia64 (32-bit)

C/C++ and COBOL compilers

C/C++: HP C/aC++ B3910B A.06.12 [Nov. 03 2006]

COBOL: Micro Focus 5.1

Java 2 JRE for the Java run-time environment

Tested with Java 2 JRE 1.6.0.07

Java 2 Software Development Kit (SDK) for the Java development environment


Database for CORBA C++ applications

Tested with Oracle Database 11gR1

IBM WebSphere MQ for Oracle Tuxedo MQ Adapter

Tested with WebSphere MQ 7.0.1.3


CORBA C++ users need a C++ compiler and linker.

For compiler compatibility:

Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:

– Source Code:

C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.

– Executables and libraries:

Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.

Network Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bitTCP/IP, using the Sockets network interface

Disk Space Requirements for HP-UX 11i v3 (32-bit) on Itanium 64-bitFor all install sets and components, 1GB is the minimum disk space requirement for installation on HP-UX 11i v3 (32-bit) Itanium systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for HP-UX 11i v3 (32-bit) on Itanium 64-bitFor HP-UX configuration instructions, see the kcweb manpage or the kernel configuration section in the sam command.

HP-UX 11i v3 (64-bit) on Itanium The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for HP-UX 11i v3 (64-bit) system on Itanium.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for HP-UX 11i v3 (64-bit) on Itanium

Full install set

Server install set








Hardware Requirements for HP-UX 11i v3 (64-bit) on Itanium Intel Itanium (64-bit)

1 GB of RAM minimum


Software Requirements for HP-UX 11i v3 (64-bit) on Itanium

Additional Notes


OS Version (Patches) HP-UX B.11.31 ia64 (64-bit)


C/C++: HP C/aC++ B3910B A.06.12 [Nov. 03 2006]











If you are using the Oracle Tuxedo IPv6 feature with Oracle JOLT, you must enable java.net.preferIPv6Addresses and disable java.net.preferIPv4Stack using the following java arguments at the same time:

– Djava.net.preferIPv6Addresses=true

– Djava.net.preferIPv4Stack=false





– Source Code:




Network Requirements for HP-UX 11i v3 (64-bit) on Itanium TCP/IP, using the Sockets network interface

Disk Space Requirements for HP-UX 11i v3 (64-bit) on Itanium For all install sets and components, 1GB is the minimum disk space requirement for installation on HP-UX 11i v3 (64-bit) Itanium systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for HP-UX 11i v3 (64-bit) on Itanium For HP-UX configuration instructions, see the kcweb manpage or the kernel configuration section in the sam command.



IBM AIX 6.1 (64-bit) on IBM PowerPCThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for AIX 6.1 (64-bit) systems on IBM PowerPC.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for IBM AIX 6.1 (64-bit)

Full install set

Server install set


ATMI (/WS) client install set




Hardware Requirements for IBM AIX 6.1 (64-bit)IBM PowerPC

1 GB of RAM minimum


Software Requirements for IBM AIX 6.1 (64-bit)


OS Version (Patches) IBM AIX 6.1 64-bit


C/C++: IBM XL C/C++ Enterprise Edition V10 , V11, or V12 for AIX or later compatible versions

COBOL: Micro Focus 5.1, or other compatible COBOL compiler


Tested with Java 2 JRE 1.6.0 and JRE 7


Additional Notes:

If you use GAUTHSVER with JDK1.6 or later, please specify the following: JAVA_OPTS=-Djavax.xml.stream.XMLInputFactory=com.bea.xml.stream.MXParserFactory in your environment before booting GAUTHSVR. If you use GAUTHSVER with Java 1.6, please add the 64-bit JRE library path to LIBPATH. The default library is located in “/usr/java6_64/jre/lib/ppc64”. Run export LIBPATH=/usr/java6_64/jre/lib/ppc64:$LIBPATH' to set the correct LIBPATH.

When using the Oracle MQ Adapter for Oracle Tuxedo in an AIX version 6.1 64-bit environment, if the dltmqlnk command is not executed to remove the symbolic link to the 32-bit WebSphere MQ libraries, you must export the TUXEDO_LIBPATH_PREPEND environment variable and set its value to the 64-bit WebSphere MQ libraries path.

When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the Oracle Tuxedo University sample applications.

ATMI users need a C, C++, or COBOL compiler.


When developing CORBA C++ client/server applications, you must use ifdef directives to include standard C++ headers or old C headers, otherwise compiler will fail.


Tested with JDK 1.6.0 and JRE 7

Non-Oracle CORBA Java clients

Tested with Java 2 SDK 1.6.0 (or higher) Interface Definition Language (IDL) ORB (run time)


Tested with Oracle 11gR1

SSL certificate authorities

Verisign

Lightweight Directory Access Protocol (LDAP) directory servers

iPlanet Directory Server; needed to retrieve X.509v3 digital certificates for SSL




The applications use the arco "OBB_ANSI_CPP" macro to distinguish the two types of headers.

– If "OBB_ANSI_CPP" is defined, the standard C++ headers are included.

– If "OBB_ANSI_CPP" is undefined, the old C headers are included.

For Oracle Tuxedo 56-bit, 128-bit, and 256-bit encryption:

– LLE and SSL are available for Oracle Tuxedo ATMI client (/WS) connections to the Oracle Tuxedo Workstation Listener (WSL) or Workstation Handler (WSH).

LLE and SSL are available for Oracle Jolt client connections to the Oracle Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).

LLE and SSL support connections between machines and domains.

– The Oracle Tuxedo Internet Inter-ORB Protocol (IIOP) Listener (ISL) and IIOP Handler (ISH) support SSL 3.0 for IIOP connections.

– Oracle Tuxedo CORBA C++ clients support SSL 3.0. SSL connectivity between these clients, and the Oracle Tuxedo ISL/ISH has been certified.

To support certificate-based authentication when using SSL, Oracle Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPLanet Directory Server.



– Source Code:




Network Requirements for IBM AIX 6.1 (64-bit)TCP/IP, using the Sockets network interface


Disk Space Requirements for IBM AIX 6.1 (64-bit)For all install sets and components, 449,800KB is the minimum disk space requirement for installation on IBM AIX 6.1 (64-bit) IBM PowerPC systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for IBM AIX 6.1 (64-bit)No IPC configuration is required for AIX. To check the value of a kernel tuning parameter (maxuproc only) enter the following command: lsattr -El sys0 -a maxuproc.

To change the value of a kernel tuning parameter (maxuproc only) enter the following command: chdev -l syso -a maxuproc=”,,,” or can enter smit chgsys and select “maximum number of processes allowed per user.”

IBM AIX 7.1 (64-bit) on IBM PowerPCThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for AIX 7.1 (64-bit) systems on IBM PowerPC.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for IBM AIX 7.1 (64-bit)

Full install set

Server install set






Hardware Requirements for IBM AIX 7.1 (64-bit)IBM PowerPC

1 GB of RAM minimum




Software Requirements for IBM AIX 7.1 (64-bit)

Additional Notes:

If you use GAUTHSVER with JDK1.6 or later, please specify the following: JAVA_OPTS=-Djavax.xml.stream.XMLInputFactory=com.bea.xml.stream.MXParserFactory in your environment before booting GAUTHSVR. If you use GAUTHSVER with Java 1.6, please add the 64-bit JRE library path to LIBPATH. The default library is located in “/usr/java6_64/jre/lib/ppc64”. Run export LIBPATH=/usr/java6_64/jre/lib/ppc64:$LIBPATH' to set the correct LIBPATH.

When using the Oracle MQ Adapter for Oracle Tuxedo in an AIX version 7.1 64-bit environment, if the dltmqlnk command is not executed to remove the symbolic link to the 32-bit WebSphere MQ libraries, you must export the TUXEDO_LIBPATH_PREPEND environment variable and set its value to the 64-bit WebSphere MQ libraries path.


OS Version (Patches) IBM AIX 7.1 64-bit


C/C++: IBM XL C/C++ for AIX, V10 or V11



Tested with Java 2 JRE 1.6.0 and JRE 1.7.0


Tested with JDK 1.6.0 and JDK 1.7.0

Non-Oracle CORBA Java clients

Tested with Java 2 SDK 1.6.0 (or higher) Interface Definition Language (IDL) ORB (run time)




Verisign




When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the Oracle Tuxedo University sample applications.



When developing CORBA C++ client/server applications, you must use ifdef directives to include standard C++ headers or old C headers, otherwise compiler will fail.

The applications use the arco "OBB_ANSI_CPP" macro to distinguish the two types of headers.

– If "OBB_ANSI_CPP" is defined, the standard C++ headers are included.

– If "OBB_ANSI_CPP" is undefined, the old C headers are included.






– Oracle Tuxedo CORBA C++ clients support SSL 3.0. SSL connectivity between these clients, and the Oracle Tuxedo ISL/ISH has been certified.

To support certificate-based authentication when using SSL, Oracle Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPLanet Directory Server.



– Source Code:






Network Requirements for IBM AIX 7.1 (64-bit)TCP/IP, using the Sockets network interface

Disk Space Requirements for IBM AIX 7.1 (64-bit)For all install sets and components, 430, 448KB is the minimum disk space requirement for installation on IBM AIX 7.1 (64-bit) IBM PowerPC systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for IBM AIX 7.1 (64-bit)No IPC configuration is required for AIX. To check the value of a kernel tuning parameter (maxuproc only) enter the following command: lsattr -El sys0 -a maxuproc.

To change the value of a kernel tuning parameter (maxuproc only) enter the following command: chdev -l syso -a maxuproc=”,,,” or can enter smit chgsys and select “maximum number of processes allowed per user.”

Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional EditionThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional Edition.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2008 R2 Server (64-bit)

Full install set

Server install set






.NET client install set


Note: Microsoft .NET Framework 4.0 must be installed in .NET client install set.

Hardware Requirements for Windows R2 2008 Server (64-bit)x86-64 processor

1 GB of RAM minimum


Software Requirements for Windows R2 2008 Server (64-bit)


OS Version (Patches) Windows Server 2008 R2 Enterprise x64 Edition


C/C++: Visual Studio 2010



Tested with Java 2 JRE 1.6.0_31 and JRE 1.7


Tested with JDK 1.6.0_31 and JDK 1.7

Non Oracle CORBA Java clients

Tested with Java 2 SDK 1.6.0 Interface Definition Language (IDL) ORB (run time)




Verisign




Additional Notes

If MicroFocus 5.1 COBOL compiler and VC10.0 (or later compatible versions) C/C++ compiler are used, the -l '-link /SUBSYSTEM:CONSOLE /ENTRY:<COBOL_OBJ_FILE>link option should be used when compiling a COBOL client.

Note: For Windows LIB and PATH environment variables, the MicroFocus COBOL library path must be specified after the Visual Studio 2010 library path (i.e., Visual Studio 2010 libraries take precedence over MicroFocus COBOL libraries during the linking stage).

The recommended practice is to run the MicroFocus COBOL createnv.bat file first, and then run the Visual Studio 2010 vcvarsall.bat file to set environment variables.

When using Oracle, Programmer/2000 Pro*C/C++ version 10.1.0.5 is required to build the Oracle Tuxedo University sample applications.





– LLE and SSL are available for Oracle Jolt client connections to the Oracle Tuxedo Jolt Server Listener (JSL) or Jolt Server Handler (JSH).

– LLE and SSL support connections between machines and domains.


To support certificate-based authentication when using SSL, Oracle Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.



– Source Code:




Network Requirements for Windows R2 2008 Server (64-bit)TCP/IP provided by Microsoft Windows 2008 Server (64-bit Winsock).

Disk Space Requirements for Windows R2 2008 Server (64-bit)For all install sets and components, 432,404 KB is the minimum disk space requirement for installation on Windows R2 2008 Server (64-bit) x86-64 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Windows R2 2008 Server (64-bit)Before running the Oracle Tuxedo software, you may need to reconfigure the interprocess communication (IPC) parameters shown in the figure titled “Oracle Administration Window with IPC Resources Page Displayed” in Using Oracle Tuxedo ATMI on Windows. For instructions about reconfiguring the IPC parameters, see “Configuring IPC Resources to Maximize System Performance” in Using Oracle Tuxedo ATMI on Windows and Checking IPC Requirements.

Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional EditionThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 2008 R2 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2008 R2 Server (64-bit)

Full install set

Server install set














Hardware Requirements for Windows R2 2008 Server (64-bit) x86-64 processor

1 GB of RAM minimum


Software Requirements for Windows R2 2008 Server (64-bit)


OS Version (Patches) Windows Server 2008 R2 Enterprise x64 Edition


C/C++: Visual Studio 2012





Tested with JDK 1.6.26 and JDK1.7.21




Verisign




Additional Notes















– Source Code:






Network Requirements for Windows R2 2008 Server (64-bit) TCP/IP provided by Microsoft Windows 2008 Server (64-bit Winsock).

Disk Space Requirements for Windows R2 2008 Server (64-bit) For all install sets and components, 472,773 KB is the minimum disk space requirement for installation on Windows R2 2008 Server (64-bit) x86-64 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Windows R2 2008 Server (64-bit) Before running the Oracle Tuxedo software, you may need to reconfigure the interprocess communication (IPC) parameters shown in the figure titled “Oracle Administration Window with IPC Resources Page Displayed” in Using Oracle Tuxedo ATMI on Windows. For instructions about reconfiguring the IPC parameters, see “Configuring IPC Resources to Maximize System Performance” in Using Oracle Tuxedo ATMI on Windows and “Checking IPC Requirements” on page 6-18.

Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2010 Professional EditionThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 2012 Server 64bit systems on x86-64 with MS Visual Studio 2010 Professional Edition.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2012 Server (64-bit)













Hardware Requirements for Windows 2012 Server (64-bit)x86_64 processor

1 GB of RAM minimum

Software Requirements for Windows 2012 Server (64-bit)

Additional Notes


ATMI users need a C or C++ compiler.





OS Version (Patches) Microsoft Windows Server 2012 Standard

C/C++ compilers C/C++: MS Visual Studio 2010 Professional Edition


Tested with Java 2 JRE 1.6.0_26


Tested with JDK 1.6.0_26









– Source Code:




Network Requirements for Windows 2012 Server (64-bit)TCP/IP provided by Microsoft Windows 2012 Server (64-bit Winsock).

Disk Space Requirements for Windows 2012 Server (64-bit)For all install sets and components, 453,158 KB is the minimum disk space requirement for installation on Windows 2012 Server (64-bit) x86_64 systems. This requirement assumes installation of the default components for the selected install set.

Microsoft Windows 2012 Server (64-bit) on x86-64 with MS Visual Studio 2012 Professional Edition The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 2012 Server 64bit systems on x86-64 with MS Visual Studio 2012 Professional Edition.


Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 2012 Server (64-bit)








Hardware Requirements for Windows 2012 Server (64-bit) x86_64 processor

1 GB of RAM minimum

Software Requirements for Windows 2012 Server (64-bit)


OS Version (Patches) Windows Server 2012 Standard

C/C++ compilers C/C++: Visual Studio 2012








Verisign



Additional Notes












– Source Code:




Network Requirements for Windows 2012 Server (64-bit) TCP/IP provided by Microsoft Windows 2012 Server (64-bit Winsock).


Disk Space Requirements for Windows 2012 Server (64-bit) For all install sets and components, 472,773 KB is the minimum disk space requirement for installation on Windows 2012 Server (64-bit) x86_64 systems. This requirement assumes installation of the default components for the selected install set.

Microsoft Windows 7 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2010 Professional EditionThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 7 64bit systems on x86-64 with MS Visual Studio 2010 Professional Edition.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Windows 7 (64-bit)








Hardware Requirements for Windows 7 (64-bit)x86_64 processor

1 GB of RAM minimum

Software Requirements for Windows 7 (64-bit)


OS Version (Patches) Microsoft Windows 7 64-bit




Additional Notes











Tested with Java 2 JRE 1.6.0_31 and JRE 1.7


Tested with JDK 1.6.0_31 and JDK 1.7


Verisign










– Source Code:




Network Requirements for Windows 7 (64-bit)TCP/IP provided by Microsoft Windows 7 (64-bit Winsock).

Disk Space Requirements for Windows 7 (64-bit)For all install sets and components, 323,790 KB is the minimum disk space requirement for installation on Windows 7 x86_64 systems. This requirement assumes installation of the default components for the selected install set.

Microsoft Windows 7 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2012 Professional Edition The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 7 64bit systems on x86-64 with MS Visual Studio 2012 Professional Edition.











Hardware Requirements for Windows 7 (64-bit) x86_64 processor

1 GB of RAM minimum


Additional Notes

If MicroFocus 5.1 COBOL compiler and VC11.0 (or later compatible versions) C/C++ compiler are used, the -l '-link /SUBSYSTEM:CONSOLE





Tested with Java 2 JRE 1.6.18 and JRE 1.7




/ENTRY:<COBOL_OBJ_FILE>link option should be used when compiling a COBOL client.














– Source Code:



Network Requirements for Windows 7 (64-bit) TCP/IP provided by Microsoft Windows 7 (64-bit Winsock).

Disk Space Requirements for Windows 7 (64-bit) For all install sets and components, 470,017 KB is the minimum disk space requirement for installation on Windows 7 x86_64 systems. This requirement assumes installation of the default components for the selected install set.

Microsoft Windows 7 (32-bit) (Client Only) on x86 with MS Visual Studio 2010The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 7 32bit systems on x86 with MS Visual Studio 2010.









Hardware Requirements for Windows 7 (32-bit)x86 proessor

1 GB of RAM minimum



Additional Notes









C/C++ compilers C/C++: Microsoft Visual Studio 10.0






Verisign










– To support certificate-based authentication when using SSL, Oracle Tuxedo provides an LDAP-based certificate retrieval mechanism. This retrieval mechanism has been certified for use with the LDAP Directory server included with iPlanet Directory Server.



– Source Code:





Disk Space Requirements for Windows 7 (32-bit)For all install sets and components, 368,696 KB is the minimum disk space requirement for installation on Windows 7 x86 systems. This requirement assumes installation of the default components for the selected install set.


Microsoft Windows 8 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2010 Professional EditionThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 8 64bit systems on x86-64 with MS Visual Studio 2010 Professional Edition.









Hardware Requirements for Windows 8 (64-bit)x86_64 processor

1 GB of RAM minimum









Additional Notes















Verisign






– Source Code:





Disk Space Requirements for Windows 8 (64-bit)For all install sets and components, 441,582 KB is the minimum disk space requirement for installation on Windows 8 x86_64 systems. This requirement assumes installation of the default components for the selected install set.

Microsoft Windows 8 (64-bit) (Client Only) on x86-64 with MS Visual Studio 2012 Professional Edition The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Microsoft Windows 8 64bit systems on x86-64 with MS Visual Studio 2012 Professional Edition.











Hardware Requirements for Windows 8 (64-bit) x86_64 processor

1 GB of RAM minimum


Additional Notes








Tested with Java 2 JRE 1.6 and JRE 1.7.21















– Source Code:




Network Requirements for Windows 8 (64-bit) TCP/IP provided by Microsoft Windows 8 (64-bit Winsock).



Disk Space Requirements for Windows 8 (64-bit) For all install sets and components, 470,017 KB is the minimum disk space requirement for installation on Windows 8 x86_64 systems. This requirement assumes installation of the default components for the selected install set.

Novell SUSE Linux Enterprise Server 11 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Novell SUSE Linux Enterprise Server 11 (64-bit) systems on x86-64.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Novell SUSE Linux Enterprise Server 11 (64-bit)

Full install set

Server install set






Hardware Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit)x86-64

1 GB of RAM minimum



Software Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit)

Additional Notes

The Kerberos Security Plug-in is not supported on this platform.





– Source Code:




OS Version (Patches) Novell SUSE Linux Enterprise Server 11 x86-64 (64-bit)


C/C++: gcc/g++ 4.3.2COBOL: Micro Focus 5.1, or other compatible COBOL compiler;


Tested with Java 2 Jrockit 1.6.0_31 and JRE 1.7.0_04


Tested with Jrockit 1.6.0_31 and Jrockit1.7.0_04








Network Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit)TCP/IP, using the Sockets network interface

Disk Space Requirements for Novell SUSE Linux Enterprise Server 11 (64-bit)For all install sets and components, 192, 824 KB is the minimum disk space requirement for installation on Novell SUSE Linux Enterprise Server 11 (64-bit) x86-64 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Novell SUSE Linux Enterprise Server 11 (64-bit)See sysctl manpage.

Oracle Linux 5.6 (32-bit) on x86The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Linux 5.6 (32-bit) on x86 systems.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Linux 5.6 (32-bit)

Full install set

Server install set






Hardware Requirements for Oracle Linux 5.6 (32-bit)x86

1 GB of RAM minimum



Software Requirements for Oracle Linux 5.6 (32-bit)

Additional Notes

The Direct Cross Node Communication Leveraging RDMA, Self-tuning Lock Mechanism, and SDP and Oracle Tuxedo SDP Support features are only supported on Exalogic. The TLOG Information To Oracle Database feature is supported on Exalogic and normal platforms.

For more information, see the Oracle Tuxedo 12c Release 1 (12.1.1) Release Notes.





OS Version (Patches) Oracle Linux 5.6 x86 (32-bit)


C/C++: gcc/g++ 4.1.2COBOL: Micro Focus 5.1






Tested with Oracle Client 11gR1


Verisign




../relnotes/relnotes.html


For COBOL-IT, you must create the softlink cob to the $COBOL-IT_HOME/bin/cobmf utility.



– Source Code:




Network Requirements for Oracle Linux 5.6 (32-bit) TCP/IP, using the Sockets network interface

Disk Space Requirements for Oracle Linux 5.6 (32-bit)For all install sets and components, 374,000 KB is the minimum disk space requirement for installation on Oracle Linux 5.6 (32-bit) systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Oracle Linux 5.6 (32-bit)See sysctl manpage.

Oracle Linux 5.4 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Linux 5.4 (64-bit) on x86-64.


Full install set

Server install set







Hardware Requirements for Oracle Linux 5.4 (64-bit)x86-64

1 GB of RAM minimum



Additional Notes




OS Version (Patches) Oracle Linux 5.4 x86 (64-bit)


C/C++: cc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-46)COBOL: Micro Focus 5.1, or other compatible COBOL compiler






Tested with Oracle Client 11gR2_x64






– Source Code:




Network Requirements for Oracle Linux 5.4 (64-bit)TCP/IP, using the Sockets network interface

Disk Space Requirements for Oracle Linux 5.4 (64-bit)For all install sets and components, 381,840 KB is the minimum disk space requirement for installation on Oracle Linux 5.4 (64-bit) on x86-64 systems. This requirement assumes installation of the default components for the selected install set.


Oracle Linux 5.6 (32-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1)requirements for Oracle Linux 5.6 (32-bit) on x86-64 systems.


Full install set

Server install set








1 GB of RAM minimum



Additional Notes





OS Version (Patches) Oracle Linux 5.6 x86 64-bit


C/C++: 4.1.2COBOL: Micro Focus 5.1, or other compatible COBOL compiler











– Source Code:







Oracle Linux 5.6 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Linux 5.6 (64-bit) on x86-64 systems.


Full install set

Server install set








1 GB of RAM minimum



Additional Notes

The Direct Cross Node Communication Leveraging RDMA, Self-tuning Lock Mechanism, and SDP and Oracle Tuxedo SDP Support features are only supported on Exalogic. The TLOG Information To Oracle Database feature is supported on Exalogic and normal platforms.

For more information, see the Oracle Tuxedo 12c Release 1 (12.1.1) Release Notes.


OS Version (Patches) Oracle Linux 5.6 x86 (64-bit), kernel 2.6.18-238.el5xen


C/C++: gcc/g++ 4.1.2COBOL: Micro Focus 5.1, or other compatible COBOL compiler.


Tested with Jrockit1.6.0_31 and JRE 1.7.0_04


Tested with Jrockit1.6.0_29 and JDK 1.7.0_04




../relnotes/relnotes.html





For COBOL-IT, you must create the softlink cob to the $COBOL-IT_HOME/bin/cobmf utility.



– Source Code:







Oracle Linux 6.0 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c (12.1.1.0) requirements for Oracle Linux 6.0 (64-bit) on x86-64.


Available Oracle Tuxedo 12c (12.1.1.0) Install Sets for Oracle Linux 6.0 (64-bit)

Full install set

Server install set






Hardware Requirements for Oracle Linux 6.0 (64-bit) x86-641 GB of RAM minimum




OS Version (Patches) Oracle Linux 6.0 x86 64-bit











Additional Notes






– Source Code:







Oracle Linux 5.6 (64-bit) on Exalogic 2.0The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Linux 5.6 (64-bit) on Exalogic 2.0 systems.



Full install set

Server install set










OS Version (Patches) Oracle Linux 5.6 (64-bit), kernel 2.6.32-200.21.1.el5uek


C/C++: gcc/g++ 4.1.2 20080704COBOL: Micro Focus 5.1, or other compatible COBOL compiler.


Tested with JRockit 1.6 (1.6.0_20-20101014-1350-linux-x86_64 )

Tested with JRE 1.7

(1.7.0_04-b20)



Additional Notes




For COBOL-IT, you must create the softlink cob to the $COBOL-IT_HOME/bin/cobmf utility .



– Source Code:





InfiniBand network, using 40Gb



Tested with JDK 1.7

(1.7.0_04-b20)


Tested with Oracle Database 11.2.0.1.0





Oracle Linux 5.8 (64-bit) on Exalogic 2.0The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Linux 5.8 (64-bit) on Exalogic 2.0 systems.


Full install set

Server install set











Additional Notes







– Source Code:


OS Version (Patches) Oracle Linux 5.8 (64-bit), kernel 2.6.32-200.21.1.el5uek





Tested with JRE 1.7

(1.7.0_04-b20)



Tested with JDK 1.7

(1.7.0_04-b20)








InfiniBand network, using 40Gb



Oracle Solaris 10 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Solaris 10 (64-bit) systems on x86-64.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 10 (64-bit) on x86-64

Full install set

Server install set








Hardware Requirements for Oracle Solaris10 (64-bit) on x86-64 x86_64

1 GB of RAM minimum


Software Requirements for Oracle Solaris10 (64-bit)

Additional Notes


OS Version (Patches) SunOS 5.10 (64-bit)


C/C++: Sun Studio 12



Tested with Java 2 JRE 1.6.0_32 and JRE 1.7.0_04


Tested with JDK 1.6.0_13 and JDK 1.7.0_04


Tested with Java 2 SDK 1.6.0_13 Interface Definition Language (IDL) ORB (run time)




Verisign






When Oracle is used, Programmer/2000 Pro*C/C++ version 10.1.0.3.0 is required to build the Oracle Tuxedo University sample applications.


Note: To use Micro Focus 5.1, C/C++ compilers should use Sun Studio 12 or higher.







– Oracle Tuxedo CORBA C++ client supports SSL 3.0. SSL connectivity between these clients, and the Oracle Tuxedo ISL/ISH has been certified.




– Source Code:




Network Requirements for Oracle Solaris10 (64-bit) on x86-64TCP/IP using the Sockets network interface.



Disk Space Requirements for Oracle Solaris10 (64-bit) on x86-64For all install sets and components, 435,192 KB is the minimum disk space requirement for installation on Oracle Solaris 10 (64-bit) x86-64 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Oracle Solaris10 (64-bit) on x86-64Use the mdb tool to change the kernel parameters.

The tunable parameters currently set on your system are in the kernel configuration file located in the /etc directory (/etc/system).

Oracle Solaris 10 (32-bit) on SPARCThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Solaris 10 (32-bit) on SPARC.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 10 (32-bit) on SPARC

Full install set

Server install set






Hardware Requirements for Oracle Solaris 10 (32-bit) on SPARCsparc

1 GB of RAM minimum



Software Requirements for Oracle Solaris 10 (32-bit) on SPARC

Additional Notes




It's not recommended to reload the operator "&" for Sun Studio 12 issue.





OS Version (Patches) SunOS 5.10









Tested with Oracle Client 11gR1_sol_sparc


Verisign









For compiler compatibility:Look for documentation from the compiler vendor that provides assurance that the version of compiler you want to use is compatible with the tested version of the compiler. The compatibility assurance must be provided for the following:

– Source Code:C/C++ source code that was compiled and linked using the tested version will compile with the newer version of complier without requiring any changes.

– Executables and libraries:Libraries and executables built using the tested version will run with libraries and executables that are built with the newer version of compilers.

Network Requirements for Oracle Solaris 10 (32-bit) on SPARCTCP/IP, using the Sockets network interface

Disk Space Requirements for Oracle Solaris 10 (32-bit) on SPARCFor all install sets and components, 616,137 KB is the minimum disk space requirement for installation on Oracle Solaris 10 (32-bit) on SPARC systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Oracle Solaris 10 (32-bit) on SPARCSee sysctl manpage.

Oracle Solaris 10 (64-bit) on SPARCThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Solaris 10 (64-bit) systems on SPARC.


Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 10 (64-bit)

Full install set

Server install set






Hardware Requirements for Oracle Solaris 10 (64-bit) on SPARCUltraSPARC

1 GB of RAM minimum











Tested with JDK 1.6.0_32 and JRE 1.7.0_04





Additional Notes















Verisign









– Source Code:




Network Requirements for Oracle Solaris 10 (64-bit) on SPARCTCP/IP using the Sockets network interface.

Disk Space Requirements for Oracle Solaris 10 (64-bit) on SPARCFor all install sets and components, 447,686KB is the minimum disk space requirement for installation on Oracle Solaris 10 (64-bit) SPARC systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Oracle Solaris 10 (64-bit) on SPARCUse the mdb tool to change the kernel parameters.


Oracle Solaris 11 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Solaris 11 (64-bit) systems on x86-64.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 11 (64-bit) on x86-64

Full install set

Server install set








Hardware Requirements for Oracle Solaris11 (64-bit) on x86-64 x86_64

1 GB of RAM minimum


Software Requirements for Oracle Solaris11 (64-bit)















Verisign


Additional Notes





















– Source Code:




Network Requirements for Oracle Solaris11 (64-bit) on x86-64TCP/IP using the Sockets network interface.

Disk Space Requirements for Oracle Solaris11 (64-bit) on x86-64For all install sets and components, 230,052 KB is the minimum disk space requirement for installation on Oracle Solaris 11 (64-bit) x86-64 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Oracle Solaris11 (64-bit) on x86-64Use the mdb tool to change the kernel parameters.


Oracle Solaris 11 Express (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Solaris 11 Express (64-bit) systems on x86-64.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Solaris11 Express (64-bit) on x86-64

Full install set

Server install set







Hardware Requirements for Solaris11 Express (64-bit) on x86-64x86_64

1 GB of RAM minimum


Software Requirements for Solaris11 Express (64-bit)


OS Version (Patches) Oracle Solaris 11 Express snv_151a X86 (64-bit)





Tested with Java 2 JRE jdk1.7.0_02


Tested with JDK jdk1.7.0_02






Verisign



Additional Notes




















– Source Code:




Network Requirements for Solaris11 Express (64-bit) on x86-64TCP/IP using the Sockets network interface.

Disk Space Requirements for Solaris11 Express (64-bit) on x86-64For all install sets and components, 267,242 KB is the minimum disk space requirement for installation on Solaris 11 (64-bit) x86-64 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Solaris11 Express (64-bit) on x86-64 Use the mdb tool to change the kernel parameters.


Oracle Solaris 11 (64-bit) on SPARCThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Oracle Solaris 11 (64-bit) systems on SPARC.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Oracle Solaris 11 (64-bit)

Full install set

Server install set








Hardware Requirements for Oracle Solaris 11 (64-bit) on SPARCSPARC

1 GB of RAM minimum



Additional Notes







OS Version (Patches) SunOS 5.11



















– Source Code:




Network Requirements for Oracle Solaris 11 (64-bit) on SPARCTCP/IP using the Sockets network interface.

Disk Space Requirements for Oracle Solaris 11 (64-bit) on SPARCFor all install sets and components, 224,355 KB is the minimum disk space requirement for installation on Oracle Solaris 11 (64-bit) SPARC systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Oracle Solaris 11 (64-bit) on SPARCUse the mdb tool to change the kernel parameters.




Red Hat Enterprise Linux 5.6 (32-bit) on x86The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Red Hat Enterprise Linux 5.6 (32-bit) on x86.

Available Oracle Tuxedo 12c Release 1 (12.1.1) Install Sets for Red Hat Enterprise Linux 5.6 (32-bit)

Full install set

Server install set






Hardware Requirements for Red Hat Enterprise Linux 5.6 (32-bit)X86

1 GB of RAM minimum


Software Requirements for Red Hat Enterprise Linux 5.6 (32-bit)


OS Version (Patches) Red Hat Enterprise Linux 5.6 x86 32bit


C/C++: gcc 4.1.2 COBOL: Micro Focus 5.1


Additional Notes






– Source Code:




Network Requirements for Red Hat Enterprise Linux 5.6 (32-bit)TCP/IP, using the Sockets network interface










Disk Space Requirements for Red Hat Enterprise Linux 5.6 (32-bit)For all install sets and components, 374,000 KB is the minimum disk space requirement for installation on Red Hat Enterprise Linux 5.6 (32-bit) on x86 systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Red Hat Enterprise Linux 5.6 (32-bit)See sysctl manpage.

Red Hat Enterprise Linux 5.4 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Red Hat Enterprise Linux 5.4 (64-bit) on x86-64.


Full install set

Server install set






Hardware Requirements for Red Hat Enterprise Linux 5.4 (64-bit)x86-64

1 GB of RAM minimum




Additional Notes






– Source Code:





OS Version (Patches) Red Hat Enterprise Linux 5.4 x86 (64-bit)








Tested with Oracle Client 11gR2_x64




Disk Space Requirements for Red Hat Enterprise Linux 5.4 (64-bit)For all install sets and components, 381,840 KB is the minimum disk space requirement for installation on Red Hat Enterprise Linux 5.4 (64-bit) on x86-64 systems. This requirement assumes installation of the default components for the selected install set.


Red Hat Enterprise Linux 5.6 (32-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Red Hat Enterprise Linux 5.6 (32-bit) on x86-64 systems.


Full install set

Server install set







1 GB of RAM minimum




Additional Notes






– Source Code:





OS Version (Patches) Red Hat Enterprise Linux 5.6 x86 64-bit


C/C++: 4.1.2COBOL: Micro Focus 5.1, or other compatible COBOL compiler














Full install set

Server install set







1 GB of RAM minimum




Additional Notes






– Source Code:






C/C++: gcc 4.1.2COBOL: Micro Focus 5.1, or other compatible COBOL compiler


Tested with Jrockit 2 JRE 1.6.0_31 and JRE1.7.0_04


Tested with Jrockit 1.6.0_31 and JDK1.7.0_04











Red Hat Enterprise Linux 5.8 (64-bit) on x86-64The following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Red Hat Enterprise Linux 5.8 (64-bit) on x86-64 systems.


Full install set

Server install set







1 GB of RAM minimum




Additional Notes







– Source Code:







Tested with JRE 1.7

(1.7.0_04-b20)



Tested with JDK 1.7

(1.7.0_04-b20)












Available Oracle Tuxedo 12c (12.1.1.0) Install Sets for Red Hat Enterprise Linux 6.0 (64-bit)

Full install set

Server install set








1 GB of RAM minimum



Additional Notes






– Source Code:



















Red Hat Enterprise Linux 6.3 (64-bit) on s390xThe following sections list Oracle Tuxedo 12c Release 1 (12.1.1) requirements for Red Hat Enterprise Linux 6.3 (64-bit) on s390x.


Full install set

Server install set







Hardware Requirements for Red Hat Enterprise Linux 6.3 (64-bit) s390x

1 GB of RAM minimum



Additional Notes



MF Cobol 5.1 WP8 is needed for GCC version 4.4.6.

CORBA, SCA, and Xalan are not supported.


OS Version (Patches) Red Hat Enterprise Linux 6.3 (s390x)


C/C++: gcc/g++ 4.4.6



Tested with Java 2 JRE 1.6.0


Tested with JDK 1.6.0




Verisign







– Source Code:




Network Requirements for Red Hat Enterprise Linux 6.3 (64-bit) TCP/IP, using the Sockets network interface

Disk Space Requirements for Red Hat Enterprise Linux 6.3 (64-bit) For all install sets and components, 315,000 KB is the minimum disk space requirement for installation on Red Hat Enterprise Linux 6.3 (64-bit) on s390x systems. This requirement assumes installation of the default components for the selected install set.

Tunable Parameters for Red Hat Enterprise Linux 6.3 (64-bit) See sysctl manpage.


C H A P T E R 1

Starting the Oracle Tuxedo Administration Console

The following sections provide the system requirements for the Oracle Tuxedo Administration Console and explain how to start and exit the Console.

What is the Oracle Tuxedo Administration Console?

Administration Console File Tree

Server Requirements

Browser Requirements

Hardware Requirements

Setting Up Your Environment for the Oracle Tuxedo Administration Console

Starting the Oracle Tuxedo Administration Console

Exiting the Oracle Tuxedo Administration Console

What is the Oracle Tuxedo Administration Console?The Oracle Tuxedo Administration Console is a graphical user interface that enables administrators to perform most administration and configuration tasks for Oracle Tuxedo

Installing the Oracle Tuxedo System B-1

applications. It is implemented as a set of Java applets, which can run on most platforms that support a Java-capable Web browser.

The server-side components of the Oracle Tuxedo Administration Console reside on one of the server machines in a Oracle Tuxedo application. To use the Console, you must enter the URL of the server and download the Java applets.

Administration Console File TreeDuring the Oracle Tuxedo software installation, the installer program places most of the directories and files for the Oracle Tuxedo Administration Console in the webgui directory, as shown in Figure 1-1.

Figure 1-1 Oracle Tuxedo Administration Console File Tree

udataobj

tuxedo12cR1

wlisten tlisten.pwtuxwsvr.inituxwsvr

java

webgui

webgui.html

webguitop.htmlwebgui.ini

cgi-bin

admconsole.jpg

TUXADM.text

bin

Oracle tuxadm

help

tuxadm

TuxApplet.jar

Oracle Tuxedo Administration Console applet files

B-2 Installing the Oracle Tuxedo System

Serve r Requ i rements

The installer program installs the following HTML files:

An HTML template file named webgui.html, which is used by the common gateway interface (CGI) program tuxadm as the basis for many screens displayed during a Oracle Tuxedo Administration Console session.

An HTML file named webguitop.html, which displays legal notices and warnings when the Oracle Tuxedo Administration Console is first brought up on the screen.

The HTML documentation files for the Oracle Tuxedo Administration Console, which are installed in a top-level directory named help.

The installer program installs the class files for the Java applet in the java directory, and installs the tuxadm program in the cgi-bin directory. The installer assigns an alias pathname for tuxadm, which is used by Web clients to access tuxadm. The alias pathname is \cgi-bin on a Windows 2003 Server system and /cgi-bin on a UNIX system.

Server RequirementsThe Oracle Tuxedo Administration Console server for Oracle Tuxedo 11g Release 1 (11.1.1.2.0) is supported on the following platforms:


HP-UX 11i v2 (64-bit) on Itanium

HP-UX 11i v2 (64-bit) on PA-RISC

IBM AIX 5.3 (32-bit) on IBM PowerPC




Microsoft Windows 2003 Server (32-bit) on x86 with MS Visual Studio 2005 Professional Edition

Microsoft Windows XP on x86 (Client Only)

Novell SUSE Linux Enterprise Server 10 (64-bit) on x86-64

Oracle Enterprise Linux 5.0 (64-bit)


Oracle Solaris 10 (64-bit) on x86-64


Browser RequirementsThe encryption level for the Oracle Tuxedo Administration Console is set with the ENCRYPTBITS parameter in the webgui.ini file for the Console. In the following webgui.ini file, the encryption level is set to 56 bits.

# Web GUI initialization file. # Created Sep 12, 2002 2:02:07 PM by Oracle software installation program. # TUXDIR=C:\oracle\tuxedo12cR1 INIFILE=C:\oracle\tuxedo12cR1\udataobj\webgui\webgui.ini NADDR=//foo5:4003 DEVICE=/dev/tcp CODEBASE=/java DOCBASE=/doc SNAPDIR=C:\oracle\tuxedo12cR1\udataobj\webgui\java\snapshot SNAPBASE=/java/snapshot ENCRYPTBITS=56


Hardware Requi rements

The ENCRYPTBITS parameter specifies the strength of encryption used in communication between the GUI applet and the Oracle Tuxedo Administration Console server. The ENCRYPTBITS parameter can be set to 0, 56, or 128. The default value is 128.

Table 1-1 lists the platforms and browsers supported for Oracle Tuxedo 11g Release 1 (11.1.1.2.0) when the Oracle Tuxedo Administration Console is configured for 56-bit or 128-bit encryption.

If the Oracle Tuxedo Administration Console is configured with no encryption (0-bit encryption), Internet Explorer 6.0 is supported on any Windows platform regardless of the Java plug-in version.

Hardware RequirementsTo run the Oracle Tuxedo Administration Console, you need a color display device that meets the following requirements:

Resolution: 800 by 600 or more is required; 1024 by 768 or more is recommended.

Colors: A minimum of 256 colors is recommended.

Table 1-1 Platforms and Browsers

On this platform . . . Oracle tested these browsers . . . Using Java plug-in . . .

HP-UX Version 11.23 (32-bit) on PA-RISC


Microsoft Windows 2008 Server (32-bit) on x86

Internet Explorer 6.0 1.4.x

Microsoft Windows XP on x86 Internet Explorer 6.0 1.4.x

Oracle Solaris 10(32-bit) on SPARC


Setting Up Your Environment for the Oracle Tuxedo Administration Console

To run the Oracle Tuxedo Administration Console, first set up your environment as described in “Setting Up Your Environment” on page 6-9. Ensure that your TUXDIR, WEBJAVADIR, and PATH environment variables are set correctly. Then set up the following two server processes:

tuxwsvr(1)

A Web server provided with the Oracle Tuxedo system software. You are not required to use this server; you may, if you prefer, use your own commercial Web server.

wlisten(1)

A server required to administer the Oracle Tuxedo Administration Console. It must be run on the MASTER machine in a Tuxedo multi-machine configuration.

After starting the tuxwsvr and wlisten server processes, you can start the Oracle Tuxedo Administration Console to monitor the tuxwsvr server and the Oracle Tuxedo application.

Starting tuxwsvrThe tuxwsvr process is a Web server process that can be used to support the Oracle Tuxedo Administration Console GUI by customers who do not have a commercial Web server or a public-domain Web server on the machine on which the Oracle Tuxedo Web GUI processes are running. The tuxwsvr process places itself in the background when invoked unless otherwise specified, and continues running until the machine shuts down or the tuxwsvr process is killed using an operating system command.

Table 1-2 lists the commands for starting tuxwsvr.

Table 1-2 Starting tuxsvr

To Start Tuxwsvr on This Platform . . .

Enter the Following Command . . .

Windows 2003 Server system

tuxwsvr -l //machine:port -i %TUXDIR%\udataobj\tuxwsvr.ini

UNIX system tuxwsvr -l //machine:port -i $TUXDIR/udataobj/tuxwsvr.ini


Se t t ing Up Your Env i ronment fo r the Orac le Tuxedo Admin is t rat ion Conso le

The Oracle Tuxedo installer program creates the tuxwsvr.ini file, an example of which is shown below:

# tuxwsvr initialization file. # Created Sep 12, 2008 2:02:07 PM by Oracle software installation program. # CGI /cgi-bin C:\oracle\tuxedo12cR1/udataobj/webgui/cgi-bin HTML /java C:\oracle\tuxedo12cR1/udataobj/webgui/java HTML /doc C:\oracle\tuxedo12cR1/help HTML / C:\oracle\tuxedo12cR1/udataobj/webgui

Usually, you do not need to edit this file, but under certain circumstances, you may want to do so. For example, you may decide to move your Java files to a non-default directory. In that case, you would need to edit the pathnames in the initialization file appropriately. For details, see reference page tuxwsvr(1) in Oracle Tuxedo Command Reference.

Starting wlistenThe wlisten process is a listener process that receives incoming connections from Web GUI applets and starts a Web GUI gateway process (wgated). All wlisten options are taken from an initialization file that is specified by the -i option. If the -i option is not given, then %TUXDIR%\udataobj\webgui\webgui.ini is used as the default initialization file on a Windows 2003 Server system, and $TUXDIR/udataobj/webgui/webgui.ini is used as the default initialization file on a UNIX system.

To start wlisten, follow these steps:

1. Check the webgui.ini file to make sure that the default values assigned to the parameters during installation are appropriate. If they are not, make the necessary changes.

For example, on a machine called foo5, the default port assigned to wlisten is 4003. To run wlisten with port 6060, edit the NADDR parameter as follows:

NADDR=//foo5:6060

For details about other parameters in the webgui.ini file, see reference page wlisten(1) in Oracle Tuxedo Command Reference.

2. Enter the following command:

wlisten


Starting the Oracle Tuxedo Administration ConsoleThe tuxadm process is a CGI process used to initialize the Web GUI from a browser. As shown in the “Synopsis” section of reference page tuxadm(1), this program can be used only as a location, or URL from a Web browser; normally it is not executed from a standard command-line prompt. Like other CGI programs, tuxadm uses the QUERY_STRING environment variable to parse its argument list.

To start the Oracle Tuxedo Administration Console, complete the following four-step procedure:

1. Start the browser.

2. Enter the following URL:

http://machine:port/webguitop.html

For example: http://foo5:4003/webguitop.html

Use of this URL depends on the following assumption: You are using tuxwsvr with the tuxwsvr.ini file. If you are using a commercial browser on the default port (8080), you can use a URL such as http://ctomsn:8080/webguitop.html.

The Oracle Tuxedo Administration Console entry page displays.

3. To start the Oracle Tuxedo Administration Console, select the Click Here to Run the Oracle Tuxedo Administration Console prompt at the bottom of the screen. The Login window displays.

4. Enter your login name and password in the appropriate fields, and select LOGIN. The password must correspond to one of the entries in the system-encrypted tlisten.pw file.

The main window of the Oracle Tuxedo Administration Console displays.

Table 1-3 contains instructions for accessing additional information about the Oracle Tuxedo Administration Console main window.

Table 1-3 Accessing Information About the Oracle Tuxedo Administration Console Main Window

If. . . Then. . .

The main window is displayed and you want to start working with the GUI

See “Administration Console Tutorial” in Oracle Tuxedo Administration Console Online Help.


Ex i t ing the Orac le Tuxedo Admin is t ra t ion Conso le

Limitation(s)The Oracle Tuxedo Administration Console has not been updated to support any new features introduced after Oracle Tuxedo release 7.1.

Exiting the Oracle Tuxedo Administration ConsoleTo exit the Oracle Tuxedo Administration Console, choose Domain → Exit from the menu bar. This menu option closes the current domain and exits the Oracle Tuxedo Administration Console applet.

The main window is displayed and you want to read a description of it

See “A Tour of the Main Window” in Oracle Tuxedo Administration Console Online Help.

The main window is not displayed and the Connect Failed error message is displayed

1. On the Administration Console server machine, verify that the wlisten process is running. On a UNIX machine, for example, enter the ps command.

2. If wlisten is not running, open the webgui.ini file and, in the line NADDR=//foo5:4003, replace the port number (4003) with a valid port number.

3. Enter wlisten again:• $ wlisten -i %TUXDIR%\udataobj\webgui\webgui.ini

(on Windows 2003 Server )• $ wlisten -i $TUXDIR/udataobj/webgui/webgui.ini

(on UNIX)4. Check that the tuxwsvr process is running at the port specified in the

URL.5. Verify the password. It must match one of the entries in the

tlisten.pw file.6. Return to step 1.

Table 1-3 Accessing Information About the Oracle Tuxedo Administration Console Main Window

If. . . Then. . .


A P P E N D I X B

Oracle Jolt 12c Release 1 (12.1.1) Overview and Installation Information

The following sections provide an overview of Oracle Jolt 12c Release 1 (12.1.1) and present the prerequisites and preparatory information for installing the Oracle Jolt 12c Release 1 (12.1.1) software components:

About Oracle Jolt

Oracle Jolt Components

Oracle Jolt Client Personalities

Oracle Jolt Capabilities

Oracle Jolt Client Support

Oracle Jolt Release Interoperability

Oracle Jolt Pre-Installation Checklist

Oracle Jolt Documentation

About Oracle JoltOracle Jolt is a Java class library and API that enables remote Java clients to access existing Oracle Tuxedo ATMI services. As shown in the following Figure C-1, Oracle Jolt extends the

Installing the Oracle Tuxedo System C-1

functionality of existing Tuxedo ATMI applications to include intranet- and Internet-wide availability.

Figure C-1 Oracle Jolt Communication Architecture Using the Jolt Applet

The preceding figure shows one of five types of Jolt client personalities supported by Oracle Jolt, all of which are briefly described in “Oracle Jolt Client Personalities” on page B-8.

.

Tuxedo Application Services

Service CService B

Service A


Web Server

Web Client

Jolt API for Java

Web Browser

Java VirtualMachine

The BEA Tuxedo ...

The BEA Tuxedo ...

The Oracle Tuxedo ...



JoltApplet

Note: Web server and Jolt server must be running on the same computer machine.

HTML Page

HTTP Protocol

Jolt Protocol

Jolt ServiceDefinitions

Jolt Applet (Client)

Jolt Server and Repository

(Repository holds Jolt servicedefinitions of Tuxedo servicesto be accessed by Jolt clients)

Intranet/ Internet(TCP/IP)

C-2 Installing the Oracle Tuxedo System

Orac le Jo l t Components

Oracle Jolt ComponentsOracle Jolt consists of the following components for enabling secure, reliable access to servers inside corporate firewalls, and for creating Java-based client programs that access Tuxedo ATMI services:

Jolt Server Listener

Jolt Server Handler

Jolt Repository Server

Jolt Repository

Jolt Internet Relay

Jolt Class Library

JoltBeans

As shown in the following Figure C-2, the Jolt server implementation consists of one or more Jolt Server Handlers, one or more Jolt Server Listeners, and one and only one Jolt Repository Server, all running on the same Oracle Tuxedo server machine.


Figure C-2 Oracle Jolt Server Implementation

A Jolt server listens for network connections from Jolt clients, translates Jolt messages, multiplexes multiple Jolt clients into a single process, and submits and retrieves requests to and from a Tuxedo ATMI application. As with all Tuxedo system executables, the Jolt server components reside in the tux_prod_dir/bin directory, where tux_prod_dir represents the directory in which the Oracle Tuxedo 12c Release 1 (12.1.1) distribution is installed.

Jolt Server ListenerA Jolt Server Listener (JSL) is a listening process, running on the Tuxedo server, that accepts connection requests from Jolt clients and assigns connections to a Jolt Server Handler also running on the Tuxedo server. It also manages the pool of Jolt Server Handler processes, starting them in response to load demands.

Oracle Tuxedo Application Servers

Service CService B

Service A


Jolt

Jolt Repository

Jolt ServerHandler

Server

JoltRepository

Jolt Server and Repository

Client

Jolt ServerListener



Jolt Server HandlerA Jolt Server Handler (JSH) is a gateway process, running on the Tuxedo server, that handles communications between Jolt clients and the Tuxedo ATMI server application. A JSH process resides within the administrative domain of the application and is registered in the local Tuxedo bulletin board as a client.

Each JSH process can manage multiple Jolt clients. A JSH multiplexes all requests and replies with a particular Jolt client over a single connection.

Jolt Repository ServerThe Jolt Repository Server (JREPSVR), running on the Tuxedo server, retrieves Jolt service definitions from the Jolt Repository and returns the service definitions to the Jolt Server Handler. The Jolt Repository Server also provides user support for updating or adding Jolt service definitions to the Jolt Repository.

Jolt RepositoryThe Jolt Repository, located on the Tuxedo server, is a central repository that contains definitions of Tuxedo ATMI services. These Jolt repository definitions are used by Jolt at run time to access Tuxedo services. You can export services to a Jolt client application or unexport services by hiding the definitions from the Jolt client. Using the Repository Editor, you can test new and existing Tuxedo services independently of the client applications.

Jolt Internet RelayJolt Internet Relay routes messages from a Jolt client to a Jolt Server Listener (JSL) or Jolt Server Handler (JSH). It eliminates the need for the JSL, JSH, and Tuxedo application to run on the same machine as the Web server. The Jolt Internet Relay consists of the following components:

Jolt Relay (JRLY)

A standalone program that routes Jolt messages from Jolt clients to the JSL or JSH via the Jolt Relay Adapter (JRAD). Jolt Relay is not a Tuxedo system server or client process, and it is not dependent on the Oracle Tuxedo system software version.

Jolt Relay Adapter (JRAD)

A Tuxedo system server that operates as a back-end relay for Jolt Relay. The JRAD may or may not be located on the same Tuxedo host machine and server group to which the JSL server is connected.


Figure C-3 illustrates the Jolt Internet Relay connection path.

Figure C-3 Oracle Jolt Internet Relay Connection Path

A Jolt server can connect directly to intranet Jolt clients and can connect indirectly to Internet Jolt clients through the Jolt Internet Relay, all at the same time. Jolt Internet Relay is transparent to Jolt servers and Jolt clients.

The JRLY executable (jrly) resides in the tux_prod_dir/udataobj/jolt/relay directory, whereas the JRAD executable resides in the tux_prod_dir/bin directory.

Jolt Class LibraryThe Jolt class library consists of Java class files that implement the Jolt API. These classes enable Java clients to invoke Oracle Tuxedo ATMI services. The Jolt class library provides functions to set, retrieve, manage, and invoke communication attributes, notifications, network connections, transactions, and services.

Oracle Tuxedo App Servers

Service CService B

Service A


JREPSVR

JoltRepository

JSL

JSH

Jolt Server and RepositoryWeb Browser

JoltClient JRADJRLY

Firewall

Web Server

Note: Web server software and JRLY process must be running on the same computer machine.



The Jolt class library files reside in the tux_prod_dir/udataobj/jolt directory and are stored in the following JAR files:

jolt.jar

joltadmin.jar

joltatm.jar

JoltBeanDev.jar

JoltBeanRt.jar

JoltBeanDevAwt.jar

JoltBeanRtAwt.jar

JoltBeanDevSwing.jar

JoltBeanRtSwing.jar

JoltBeanDevSwing11.jar

JoltBeanRtSwing11.jar

joltjse.jar

joltwls.jar

To view the content of a Jolt JAR file, ensure that the path to the JDK 1.3 (or higher) software is included at the front of your PATH variable, go to the tux_prod_dir/udataobj/jolt directory, and enter the following command:

prompt> jar -tvf filename.jar

For example:

prompt> jar -tvf jolt.jar 0 Thu Aug 08 07:19:02 EDT 2002 META-INF/ 68 Thu Aug 08 07:19:02 EDT 2002 META-INF/MANIFEST.MF 547 Thu Aug 08 07:19:00 EDT 2002 bea/jolt/ApplicationException.class 741 Thu Aug 08 07:19:00 EDT 2002 bea/jolt/BData.class 951 Thu Aug 08 07:19:00 EDT 2002 bea/jolt/ByteArrayUtil.class . . .


JoltBeansJoltBeans provides a JavaBeans-compliant interface to Oracle Jolt. JoltBeans are Bean components that can be used in JavaBeans-enabled integrated development environments (IDEs) to construct Jolt clients.

JoltBeans consists of two sets of Java Beans: JoltBeans toolkit (a JavaBeans-compliant interface to Oracle Jolt that includes the JoltServiceBean, JoltSessionBean, and JoltUserEventBean) and Jolt GUI beans, which consist of Jolt-aware Abstract Window Toolkit (AWT) and Swing-based beans. The separation of Oracle Jolt into these components permits the transactional and Internet components of client/server applications to be implemented separately with the security and scalability required for large-scale Internet and intranet services.

Oracle Jolt Client PersonalitiesIn addition to using Oracle Jolt to build client applets and applications that remotely invoke existing and new Tuxedo applications, Java programmers can use Oracle Jolt to build HTTP servlets to perform server-side Java tasks in response to HTTP requests. This latter type of Jolt connectivity enables simple Web clients to access Tuxedo application services through any Web application server that supports generic servlets.

Oracle Jolt supports the following types of Java client personalities:

Jolt applet—a downloadable Java interactive program, running in a Web browser environment, that uses the Jolt classes to invoke Tuxedo services from within a Web page. Accessing Tuxedo ATMI services in this manner requires the downloading and installation of Jolt class package jolt.jar (and possibly other Jolt class packages except joltjse.jar, and joltwls.jar) on the machine running the Jolt applet.

Jolt application—a standalone Java client, running on the Java Virtual Machine and operating system of a client machine, that uses the Jolt classes to invoke Tuxedo services. Accessing Tuxedo ATMI services in this manner requires the installation of Jolt class package jolt.jar (and possibly joltadmin.jar) on the machine running the Jolt application.

JSE Connectivity for Oracle Tuxedo—a Jolt HTTP servlet, running in a Java Web application server environment (for example, Oracle WebLogic Server), through which simple Web-browser clients can invoke Tuxedo ATMI services. Accessing Tuxedo ATMI services in this manner requires the installation of Jolt class packages jolt.jar and joltjse.jar on the machine running the Web application server.


Orac le Jo l t Capabi l i t i es

A Jolt HTTP servlet uses Jolt session pool classes to invoke Tuxedo services on behalf of simple browser clients. Thus, the servlet handles all Jolt transactions on the Web server, which enables simple browser clients to invoke Oracle Tuxedo services without directly connecting to the Jolt server and Oracle Tuxedo.

WebLogic Connectivity for Oracle Tuxedo—a customized version of Jolt JSE Connectivity for the Oracle WebLogic Server. Accessing Tuxedo ATMI services in this manner requires the installation of Jolt class packages jolt.jar, joltjse.jar, and joltwls.jar on the machine running Oracle WebLogic Server.

The Jolt client personality “WebLogic Connectivity for Oracle Tuxedo” is also known as “Oracle Jolt for Oracle WebLogic Server.”

Oracle Jolt CapabilitiesRunning as a Java applet or as a standalone Java client application, Oracle Jolt supports the following capabilities:

Transaction context propagation

Access to asynchronous Oracle Tuxedo event notifications

Typed buffer support

Oracle Jolt automatically converts Java messages to native Oracle Tuxedo data types and buffers, and converts Oracle Tuxedo data types and buffers back to Java messages.

Jolt session pooling

Oracle Jolt supports the construction and use of Jolt session (connection) pools to increase efficiency, availability, and reliability.

Jolt session pooling reset

Oracle Jolt support an option to reset a Jolt session pool without stopping the Jolt client, in the event of session pool failure. For example, if the Tuxedo server crashes or the Jolt Server Handler shuts down, the Jolt session pool may be reset without stopping the Jolt client.

To accommodate the Oracle Jolt 12c Release 1 (12.1.1) server (JSL, JSH, JREPSVR) and Jolt Internet Relay (JRLY, JRAD) components, your environment must provide 2 MB of disk space. For Oracle Jolt 12c Release 1 (12.1.1) system requirements, including supported platforms, see “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1.


Oracle Jolt Client SupportAs stated in “Oracle Jolt Client Personalities” on page B-8, Oracle Jolt 12c Release 1 (12.1.1) supports the following four client types:

Jolt applet

Jolt application

JSE Connectivity for Oracle Tuxedo

WebLogic Connectivity for Oracle Tuxedo

Figure C-1 lists the requirements for the Jolt 12c Release 1 (12.1.1) applet and application client types.

Figure C-2 lists the requirements for the remaining three Jolt client types, all of which are implemented by HTML-based Jolt client classes running inside a Web server. The Web servers certified with Oracle Jolt 12c Release 1 (12.1.1) are listed in the table.

Table C-1 Requirements for Oracle Jolt 12c Release 1 (12.1.1) Applet and Application Client Types

This client type . . . Is supported on . . .

Java applet running in a browser Microsoft Internet Explorer (IE) 6.0 or higher

Jolt application—standalone application—running in a desktop environment

Java Development Kit (JDK) 1.4.x


Orac le Jo l t C l i ent Suppor t

Note: JSE Connectivity for Oracle Tuxedo is the name of the Jolt Web application server that simplifies the handling of servlets in a Oracle Tuxedo application environment. JSE is short for Java Servlet Engine.

Oracle Jolt Client RequirementsOracle Jolt has the following client requirements:

574 KB of disk space for client classes

1364 KB of disk space for client API documentation

190 KB of disk space for client examples

Java Development Kit (JDK) 1.5.x is certified for Oracle Jolt 12c Release 1 (12.1.1) application development (http://java.sun.com/j2se)

Java-enabled browser (Internet Explorer) or Java Virtual Machine (JVM)

Oracle Jolt Client Class LibraryVarious implementations of Java tend to show minor differences in characteristics. Oracle Jolt 12c Release 1 (12.1.1) is based on JDK 1.5.0_0_9.

Table C-2 Requirements for Web-Server based Oracle Jolt 12c Release 1 (12.1.1) Client Types

Vendor Web Server Version

OS Version Oracle Jolt Client Personality

Comments

Any vendor Java Servlet Engine

(Any version)

Any OS running JDK 1.4.x

JSE Connectivity for Oracle Tuxedo

For a description, see the first note after this table.

Oracle Systems, Inc.

Oracle WebLogic Enterprise 5.1 or Oracle WebLogic Server 6.0 or higher

Any WebLogic Connectivity for Oracle Tuxedo (also known as “Oracle Jolt for Oracle WebLogic Server”)

For example installation instructions, see “Installing Oracle Jolt 12c Release 1 (12.1.1) with Oracle WebLogic Server” on page 5-10.


http://java.sun.com/j2se

The Oracle Jolt class library is compatible with the browsers and JDK versions shown in Figure C-3.

Oracle Jolt Release InteroperabilityAn Oracle Jolt 12c Release 1 (12.1.1) client can interoperate with a Oracle Jolt 1.2, 1.2.1, 8.0, 8.1, 9.0, 9.1, or 10.0 server implementation, and the client is able to use the new features available with Oracle Jolt 12c Release 1 (12.1.1).

An Oracle Jolt 1.2, 1.2.1, 8.0, 8.1, 9.0, 9.1, 10.0 client can interoperate with an Oracle Jolt 12c Release 1 (12.1.1) server implementation, but only the Oracle Jolt 1.2, 1.2.1, 8.0, 8.1, 9.0, 9.1, or 10.0 functionality is available to the Oracle Jolt client, even though new functionality is added to the Oracle Jolt server-side components when they are upgraded to Oracle Jolt 12c Release 1 (12.1.1).

Oracle Jolt Pre-Installation ChecklistOn Windows systems, Oracle Jolt 12c Release 1 (12.1.1) automatically installs two Microsoft dynamic link libraries (DLLs), MSVCRT.DLL and MSVCRP71.DLL.

Oracle Jolt DocumentationFor more information about Oracle Jolt, see the following documentation:

Using Oracle Jolt

Using Oracle Jolt with Oracle WebLogic Server

Table C-3 Oracle Jolt Class Library Compatibility

Vendor Browser Version Java Virtual Machine (JVM)

OS Version

Microsoft Internet Explorer 6.0 JDK 1.5.0_0_9 Windows 2003 Server, Windows XP Professional


A P P E N D I X D

File and Database Management and Disk Space Allocation

The following sections describe Oracle Tuxedo file and database management and provide guidelines for allocating disk space for a Oracle Tuxedo application:

Introduction

How the Oracle Tuxedo System Manages Files

Arranging for Raw Disk Space

How the Oracle Tuxedo Filesystem Is Organized

Space for Queue Spaces

Space for Application Servers

IntroductionFor the most part, the following discussions apply to both Windows and UNIX systems except for the guidelines to repartition hard disk devices. On a Windows system, input/output (I/O) is buffered by default, but Oracle Tuxedo sets a certain system-level flag to change the default. Thus, all I/O for Oracle Tuxedo processes is unbuffered, meaning that you do not need to make any special disk-space arrangements on a Windows system.

How the Oracle Tuxedo System Manages FilesThe Oracle Tuxedo system provides a facility called the Disk Management Interface (DMI), which manages logical files within a single disk device or set of devices. The DMI performs tasks

Installing the Oracle Tuxedo System D-1

such as storing binary configuration tables and the transaction log. You can use it to create, initialize, or destroy entries in the Oracle Tuxedo filesystem. To access the DMI, use the tmadmin(1)administrative commands described in the Oracle Tuxedo Command Reference.

There are two ways that the logical files managed by the DMI can be stored physically:

Stored on an operating-system (OS) filesystem

Stored on disk space, set aside for the Oracle Tuxedo system, that is outside the control of all OS filesystems

Oracle Tuxedo files reside on device special files in the designated space and are managed directly by the DMI disk management software. The DMI supports the notion of a Oracle Tuxedo filesystem distinct from any OS filesystem.

Space outside the OS filesystem is usually referred to as raw disk space. Not only is I/O faster when done by system calls reading directly from and writing directly to device special files on raw disks, but a physical write() occurs right away. When using an OS filesystem, Oracle Tuxedo cannot predict or control the precise moment at which a write() is done. When using raw disk space, however, Oracle Tuxedo has accurate control of the write operation, which is particularly important for entries in the Oracle Tuxedo transaction log. Also, when multiple users are accessing the system, being able to control the write operation is important for assuring database consistency.

Arranging for Raw Disk SpaceIf you decide to use raw disk space for your Oracle Tuxedo application, and you are using a UNIX system, you may find that the hard disk devices on your system are fully allocated to filesystems such as / (root) and /usr. If that is the case, you must repartition your hard disk device in order to set aside some partitions for use as non-OS filesystems. For repartitioning instructions, refer to the system administration documentation for your platform.

How the Oracle Tuxedo Filesystem Is OrganizedA Oracle Tuxedo filesystem has a Volume Table of Contents (VTOC), which lists the files residing on the devices named in the Universal Device List (UDL). The UDL contains information about the location of the physical storage space for Oracle Tuxedo system tables.

In a Oracle Tuxedo application, all system files might be stored together on the same raw disk slice or OS filesystem. While it is possible to use regular OS filesystem files for the configuration tables, we strongly recommend that you store the transaction log, TLOG, on a raw disk device.

D-2 Installing the Oracle Tuxedo System

How the Orac le Tuxedo F i l esys tem I s Organ ized

Because the TLOG seldom needs to be larger than 100 blocks (51200 bytes assuming 512-byte blocks), and because disk partitions are always substantially larger than 100 blocks, it may make sense to use the same device for both the configuration files and the TLOG.

Listing D-1 shows a sample VTOC and UDL diagram for a bankapp (sample application) configuration on a single machine.

Listing D-1 VTOC and UDL Diagram

Output based on setting FSCONFIG=$TUXCONFIG, and invoking tmadmin: No bulletin board exists. Entering boot mode. > livtoc Volume Table of Contents on /usr2/bank/tuxconfig: 0: VTOC: Device 0 Offset 0 Pages 7 1: UDL: Device 0 Offset 7 Pages 28 2: _RESOURCE_SECT: Device 0 Offset 35 Pages 6 3: _MACHINES_SECT: Device 0 Offset 41 Pages 40 4: _GROUPS_SECT: Device 0 Offset 141 Pages 100 5: _SERVERS_SECT: Device 0 Offset 241 Pages 150 6: _SERVICES_SECT: Device 0 Offset 391 Pages 60 7: _ROUTING_SECT: Device 0 Offset 451 Pages 100 8: _NETWORK_SECT: Device 0 Offset 551 Pages 20 9: _MIBPERMS_SECT: Device 0 Offset 571 Pages 2 10: _NETGROUPS_SECT: Device 0 Offset 573 Pages 2 11: _INTERFACES_SECT: Device 0 Offset 575 Pages 10 # If the TLOG is stored on the same device, there will be an # entry something like: 12: TLOG: Device 0 Offset 585 Pages 100

The Oracle Tuxedo application administrator must make sure raw disk slices are available as needed on each node participating in an application. Table D-1 lists the size of each element in the Oracle Tuxedo filesystem.

Installing the Oracle Tuxedo System D-3

The amount of space required for the TUXCONFIG file must be larger if there are more entries in the configuration file, UBBCONFIG, than in the bankapp sample application. The administrator is encouraged to allocate additional space for dynamic reconfiguration and growth of the application. The default block size assumed by the crdl subcommand of tmadmin is 1000 blocks (512000 bytes assuming 512-byte blocks), which should be adequate for the initial installation.

Space for Queue SpacesIf your Oracle Tuxedo application uses /Q for store-and-forward queue management, your queue space can be listed in the same UDL as the one used to store the TUXCONFIG file and the TLOG, and managed by the Oracle Tuxedo VTOC.

Space for Application ServersAs you are calculating your space requirements for the Oracle Tuxedo system, you should also consider the requirements of the servers that perform the work of the application. These requirements are specified by the application; they are unrelated to the requirements for the Oracle Tuxedo system itself (unless otherwise specified).

Table D-1 Size of Oracle Tuxedo System Tables

Entity 512-Byte Pages (Blocks)

VTOC 7

TUXCONFIG 550

TLOG 100 (default)

UDL 28

TOTAL 685

D-4 Installing the Oracle Tuxedo System

A P P E N D I X E

IPC Resource Configuration on a UNIX System

The following sections describe the interprocess communication (IPC) parameters on a UNIX system and provide guidelines for configuring them:

Parameter Sets Controlling IPC Resources

Shared Memory

Semaphores

Message Queues and Messages

Other Kernel Tunables

Parameter Sets Controlling IPC ResourcesOn a UNIX system, the Oracle Tuxedo system uses the IPC resources provided by the UNIX operating system, which are controlled by the tunable parameters listed in Table E-1.

Table E-1 Tunable Parameters

Tunable Parameters Starting with This Prefix . . . Control the . . .

SHM Amount of shared memory

SEM Number of semaphores

MSG Size of message queues and messages

Installing the Oracle Tuxedo System E-1

The settings for these parameters are application-dependent. Most UNIX systems are shipped with default values that are too low for a Oracle Tuxedo application.

Because the IPC parameters vary across different versions of the UNIX system, the descriptions provided in the following sections are generic. For the exact parameter names and defaults for each platform and for information on how to change parameter values, see “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1. If you change a parameter value, you will need to rebuild the kernel and reboot the operating system, using standard administrative tools. Consult your operating system administrator or the system administrator’s guide for your platform for details.

If your Oracle Tuxedo application is distributed, the minimum IPC resources must be available on every UNIX platform participating in the application.

Shared MemoryIn the Oracle Tuxedo environment, shared memory is used for the bulletin board and the control table of the workstation listener (WSL) and the IIOP listener (ISL) processes. An application may also use shared memory for its own purposes.

The following shared memory parameters may need to be adjusted:

SHMMAXMaximum size, in bytes, of a shared memory segment. This number represents the largest shared memory segment that can be allocated. A process can, however, attach to more than one segment of size SHMMAX.

SHMSEGMaximum number of shared memory segments per process. For a given configuration, the maximum amount of shared memory to which a process can attach is the product (in bytes) of SHMMAX * SHMSEG. A value between 6 and 15 should be adequate.

SHMMNIMaximum number of shared memory identifiers in the system. The Oracle Tuxedo system requires one identifier per bulletin board and an additional identifier for each workstation listener (WSL) and IIOP listener (ISL) that is running.

SHMMINMinimum size, in bytes, of shared memory segment. This parameter should always be set to 1.

E-2 Installing the Oracle Tuxedo System

Semaphores

SemaphoresEvery process that participates in a Oracle Tuxedo application requires a semaphore. A semaphore is a hardware or software flag used to prevent processes from accessing the same shared memory space at the same time. When a process has control of a shared memory resource, all other processes are locked out of the shared memory resource until the process releases the resource.

When the Oracle Tuxedo application is booted, the underlying Oracle Tuxedo system checks the number of semaphores configured in the operating system. If the configured number is not high enough, the boot fails.

The following semaphore parameters may need to be adjusted:

SEMMNSMaximum number of semaphores in the system. The minimum requirement for SEMMNS is

MAXACCESSERS - MAXWSCLIENTS + 13

where MAXACCESSERS is the maximum number of Oracle Tuxedo system processes on a particular machine (including servers and native clients) and MAXWSCLIENTS is the maximum number of Oracle Tuxedo remote clients. Both of these parameters are specified in the UBBCONFIG file for the application. For more information about UBBCONFIG, see “Creating the Configuration File” in Setting Up an Oracle Tuxedo Application or UBBCONFIG(5) in the File Formats, Data Descriptions, MIBs, and System Processes Reference.

SEMMNIMaximum number of active semaphore sets.

SEMMSLMaximum number of semaphores per semaphore set. SEMMNI and SEMMSL are commonly chosen so that their product equals SEMMNS. The Oracle Tuxedo system does not perform semaphore operations on semaphore sets; however, it attempts to allocate as many semaphores per semaphore set as possible.

SEMMAPSize of the control map used to manage semaphore sets. SEMMAP should be equal to SEMMNI.

SEMMNUNumber of undo structures in the system. Because an undo structure is needed for each process that can access the bulletin board, SEMMNU must be at least as large as SEMMNS. (The UNIX operating system uses undo structures to unlock semaphores held by processes that die unexpectedly.)


SEMUMEMaximum number of undo entries per undo structure. The value 1 suffices.

Message Queues and MessagesThe Oracle Tuxedo system uses UNIX system messages and message queues for client/server communication. Examples of such messages are service requests, service replies, conversational messages, unsolicited notification messages, administrative messages, and transaction control messages.

Every Multiple Servers, Single Queue (MSSQ) set of servers and every individual server has a message queue for receiving requests. Every client has its own queue for receiving replies. Servers that specify the REPLYQ parameter also get individual reply queues.

The adjustment of kernel message parameters is important to the proper tuning of an application. Inappropriate values can lead to an inability to boot, or to severe performance degradation.

Several message queue parameters are available to define various characteristics of the queue space, as indicated in Table E-2.

If the limit specified by any of these parameters is exceeded, then a blocking condition occurs. There is one exception to this rule: MSGMAX. Messages that exceed 75 percent of MSGMNB, or that are larger than MSGMAX, are placed in a UNIX file. A very small message containing the filename is then sent to the recipient. Because this mode of operation results in a severe reduction in performance, we strongly recommend that you avoid it.

Table E-2 Message Que Parameters

This Parameter. . . Specifies the . . .

MSGTQL Total number of outstanding messages that can be stored by the kernel

MSGMNB Total number of bytes that can be stored on one queue

MSGMAX Maximum size of an individual message

MSGSEG Total number of message segments that can be outstanding at one time

MSGSSZ Size of each segment


Message Queues and Messages

What Is Application Deadlock?An application deadlock can result if every process is blocked while trying to send a message. For example, when clients fill up the message space with requests, servers that are trying to send replies are blocked. Therefore, no server can read a message and a deadlock results. Occasionally, timeouts can break a deadlock, but no useful work will have been done.

A client that sends its requests with the TPNOREPLY flag is especially troublesome. This practice can fill either individual queues or the system message space, depending on the size of the messages. Such applications may have to implement their own flow control to limit the number of outstanding messages.

To summarize, if clients or servers are blocking on their send operations (requesting services or sending replies), there is potential for trouble. It is usually no problem, though, for a single server request queue to remain full, as long as there is space in the system for more messages on other queues.

Performance Implications of Blocking ConditionsThere are performance implications to queue blocking conditions, both on the sending side and the receiving side. When waking up blocked processes, the UNIX operating system wakes up all the processes blocked on a particular event, even if only one can proceed. The other processes go back to sleep. This process scheduling overhead can be expensive.

For example, on an empty server request queue on which more than one server (MSSQ) resides, an arriving message wakes up all the idle (blocked) servers on that queue. In the case of a full server request queue, as each request is read by a server, the system wakes up all the blocked clients. Depending on the size of the messages, zero or more clients can place messages on the queue. The rest go back to sleep. Because there may be hundreds of clients in the system, the mass wakeup of all of these clients every time a service request is processed can severely degrade performance.

Tunable Message ParametersA properly tuned system rarely fills its queues. Enough slack should be left in the queues to handle the natural variability of the message flow. No exact settings can be recommended. Tuning is very application dependent. The UNIX ipcs(1) command provides a snapshot of the queues so you can determine whether they are full. You can try setting the TPNOBLOCK flag when sending requests. If you do, clients can tell when queues are full, and they can slow down a bit. It might help to increase the scheduling priority of servers with full request queues.


The following message parameters may need to be adjusted:

MSGMNINumber of unique message queue identifiers. Each process participating in a Oracle Tuxedo application on a particular machine typically needs at least one message queue. This number is reduced if MSSQ sets are used, which means that multiple server processes share a single queue. For transaction processing, count an additional queue per server group for transaction manager server (TMS) processes. Thus, the minimum requirement for MSGMNI can be determined by the following formula:

MSGMNI = MAXACCESSERS + 7 + (number of servers with REPLYQ) + (number of MSSQ sets) - (number of servers in MSSQ sets)

MSGMAXMaximum message size in bytes. MSGMAX must be big enough to handle any Oracle Tuxedo application running on this machine.

MSGMNBMaximum message queue length in bytes. This number must accommodate the total size of all messages that are on a queue and have not been taken off by the associated processes. The minimum value for MSGMNB is the value of MSGMAX. Messages longer than 75% of MSGMNB are sent to a file instead of a message queue—a situation that should be avoided because it severely degrades performance.

MSGMAPNumber of entries in the control map used to manage message segments. The value of MSGMAP should be the number of message segments (specified in MSGSEG).

MSGSSZSize, in bytes, of a message segment. A message can consist of several such segments. The value of MSGSSZ should be such that a multiple of MSGSSZ is equal to the size (including the Oracle Tuxedo system header) of the most commonly sent message. By dividing messages into segments in this way, you can avoid wasting space.

MSGSEGNumber of message segments in the system.

MSGTQLTotal number of outstanding messages that can be stored by the kernel. This is the maximum number of unread messages at any given time.


Other Kerne l Tunables

Other Kernel TunablesExperience with the Oracle Tuxedo system has shown that some other UNIX system tunables may need to be set to higher values. These parameters are very application dependent and do not apply to all applications. “Oracle Tuxedo 12c Release 1 (12.1.1) Platform Data Sheets” on page A-1 includes information on the defaults for each platform and instructions for changing them.

ULIMITMaximum file size. ULIMIT needs to be large enough so that you can install the Oracle Tuxedo system and build servers. We recommend 4 MB.

NOFILESMaximum number of open files per process. A Oracle Tuxedo server requires a minimum of four file descriptors.

MAXUPMaximum number of processes per non-superuser. The Oracle Tuxedo system processes—servers and administrative processes—run with the UID specified in the application’s UBBCONFIG file. MAXUP needs to be large enough to allow all of these processes to run.

NPROCMaximum number of processes (system wide).

NREGIONNumber of region table entries to allocate. Most processes have three regions: text, data, and stack. Additional regions are needed for each shared memory segment and each shared library (including text and data) that is attached. However, the region table entry for the text of a “shared text” program is shared by all processes executing that program. Each shared memory segment attached to one or more processes uses another region table entry.

NUMTIMMaximum number of STREAMS modules that can be pushed by the Transport Layer Interface (TLI). A typical default value is 16; we recommend setting this parameter to at least 256.

NUMTRWThe number of TLI read/write structures to allocate in kernel data space. A typical default value is 16; we recommend setting this parameter to at least 256.


oracle® tuxedo...running simpapp to verify the oracle tuxedo corba c++ software installation . ....

Documents