optix rtn 600
TRANSCRIPT
8/3/2019 OptiX RTN 600
http://slidepdf.com/reader/full/optix-rtn-600 1/6
8/3/2019 OptiX RTN 600
http://slidepdf.com/reader/full/optix-rtn-600 2/6
Deploy Your Networklized Microwave Radio
Transmission Solution
To Build a Future-Oriented, Operable, Manageable,
and Flexible Microwave Radio Transmission Network
To Reduce Network CAPEX and OPEX
•
•
•
8/3/2019 OptiX RTN 600
http://slidepdf.com/reader/full/optix-rtn-600 3/6
Product Features
Seamless Integration Between Radio and Fiber Transmission
The RTN 600 can be deployed as microwave radio transmission equipment, optical transmission
equipment, or radio and ber hybrid transmission equipment.
The RTN 600 uses the same network management system as other Huawei optical network products,
allowing for end-to-end service provisioning and management.
•
•
The OptiX RTN 600 radio transmission system (hereinafter referred to as the RTN 600) is a digital microwave
radio transmission system developed by Huawei Technologies Co., Ltd. based on extensive experience in thetransport eld and a comprehensive understanding of transport network solutions. The modular design of
the RTN 600 allows for rich service interfaces, networking exibility, software-programmable capacity, easy
installation and maintenance, and easy upgrade and expansion capabilities. With these superior features,
the RTN 600 can be widely applied for base station backhaul and broadband service access. With the recent
joining of the RTN 600 located at the access layer of a transmission network, the Huawei OptiX product
portfolio provides a complete and seamless transport solution.
The RTN 600 is a split-mount, software programmable, PDH/SDH compatible radio transmission system that
integrates both radio and ber transmission. Currently, the RTN 610 and RTN 620 are the two types of the
RTN 600 series designed for various application scenarios. Common software and hardware platforms are
used across the RTN 600 series. The boards are compatible. Four RF directions are supported, with each
direction having a software-programmable capacity ranging from 4xE1 to 1xSTM-1.
OptiX RTN 600 Radio Transmission System
RTN 610 RTN 620
8/3/2019 OptiX RTN 600
http://slidepdf.com/reader/full/optix-rtn-600 4/6
Built-in MADM
One RTN 600 supports multiple RF directions.
Enhanced exibility in PDH/SDH ring networking.
Full timeslot cross-connection in any direction.
Quick service provisioning and adjustment.
No external ADM is necessary, and lesser DDFs, external cable connections, and IDU service interface units.
Radio-Based MSTP
A single platform supports PDH, SDH, Ethernet, and hybrid transmission of multiple services.A common platform with Huawei optical network MSTP equipment, enabling the RTN 600 to transmit
or terminate services carried by other Huawei optical network products and upgrade to support more
new services.
Future-Oriented Design
Agile modulation: A single modulation/demodulation unit supports selectable modulation rates from
QPSK to 128QAM. The frequency bandwidth is software programmable from 3.5 MHz to 28 MHz.
Upgradable from PDH to SDH: Transmission capacity of a single RF is software programmable from
4xE1 to 1xSTM-1.
Upgradable from radio transmission to fiber transmission: When the IF board is replaced with an
optical board, the radio transmission equipment can function as optical transmission equipment for
providing higher transmission capacity.
Modular design: Modules are exibly congured depending on varied services and application scenarios.
Powerful Clock Processing Capability
Supports the extraction of the clock source from line, tributary, radio, and external clock signals.
Supports the synchronization status message (SSM) protocol and the extended SSM protocol.
Supports the retiming function of the tributary.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8/3/2019 OptiX RTN 600
http://slidepdf.com/reader/full/optix-rtn-600 5/6
Complete Protection Mechanism
Supports 1+1 FD/SD/HSB protection.
Supports SNCP between optical links, between radio links, or between optical links and radio links.
Supports 1+1 backup for the clock module and ADM module.
Supports 1+1 backup for the internal power module, and supports two inputs of external power supply.
Easy Installation
Light and highly integrated.
The IDU can be installed on the wall, on the desktop, in a 19-inch cabinet, in an open shelf, or in a 300
mm ETSI cabinet.
The ODU can be mounted as an integral part of the antenna.
Easy Maintenance
Supports board-level maintenance.
All the boards are hot swappable.
Replacing the system control and communication (SCC) board does not interrupt services.
Supports ash cards for easy service provisioning and SCC board replacement.
•
•
•
•
•
•
•
•
•
•
•
Huawei's Total Solution for Mobile Backhaul
Access Access HUB Metro
RTNRTN
OSN
NMS
RTN RTN RTNPrivate
RTN
RTN
RTN
RTN
RTN
BTS
Node B
Node B
8/3/2019 OptiX RTN 600
http://slidepdf.com/reader/full/optix-rtn-600 6/6
Technical Specifcations
HUAWEI TECHNOLOGIES CO., LTD.
Add: Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Version No.: M3-040030-20070330-C-1.0
www.huawei.com
Frequency Band (GHz) 7 8 11 13 15 18 23 26 38
Frequency Range (GHz)7.114 to7.897
7.731 to8.496
10.700 to11.700
12.751 to13.248
14.501 to15.257
17.685 to19.710
22.000 to23.608
24.549 to26.453
37.044 to39.452
Channel Spacing (MHz) 3.5, 7, 14, 28Standard/High-power Nominal
Maximum OutputPower (dBm)
QPSK 25.5/30.0 25.5/30.0 24.5 24.5 24.5 24 22.5 22 20.5
16QAM 21.0/28.0 21.0/28.0 20 20 20 20 19 18 16
128QAM 15.0/24.0 15.0/24.0 14 14 14 14 13 12 10
Receiver SensitivityRSL@ BER=10-6
(dBm)
4xE1QPSK -91.5 -91.5 -91.0 -91.0 -91.0 -91.0 -90.5 -90.0 -88.5
16QAM -87.5 -87.5 -87.0 -87.0 -87.0 -87.0 -86.5 -86.0 -85.5
8xE1QPSK -88.5 -88.5 -88.0 -88.0 -88.0 -88.0 -87.5 -87.0 -85.5
16QAM -84.5 -84.5 -84.0 -84.0 -84.0 -84.0 -83.5 -83.0 -81.5
16xE1QPSK -85.5 -85.5 -85.0 -85.0 -85.0 -85.0 -84.5 -84.0 -82.5
16QAM -81.5 -81.5 -81.0 -81.0 -81.0 -81.0 -80.5 -80.0 -78.5
STM-1 128QAM -70.5 -70.5 -70.0 -70.0 -70.0 -70.0 -69.5 -69.0 -67.5
Nominal Minimum Output Power (dBm) –4
Tx Frequency Stability (ppm) ±5
Interface Type
SDH InterfaceSTM-1 optical interface: Ie-1, S-1.1, L-1.1, L-1.275-ohm STM-1 electrical interface
PDH Interface 75-ohm /120-ohm E1 interface
Ethernet Interface 10M/100M BASE_T(x) interface
Alarm Interface External alarm input/output interface
Interface Capacity
STM-1 optical interface: 1xSTM-1 to 10xSTM-1
STM-1 electrical interface: 1xSTM-1 to 10xSTM-1PDH interface: 4xE1 to 64xE1Ethernet interface: 4xFE to 16xFEAlarm interface: 6 inputs + 2 outputs
RF DirectionRTN 610: one directionRTN 620: up to four directions
CongurationRTN 610: 1+0RTN 620: 1+0/1+1/2+0/East-west/Hub node (max. 4 ODUs)
Dimensions andWeight
IDU
RTN 610:Dimensions: 442 mm (width) x 44 mm (height) x 215 mm (depth)
Weight: < 4 kgRTN 620:Dimensions: 442 mm (width) x 87 mm (height) x 215 mm (depth)Weight: < 8 kg
ODUDimensions: 260 mm (width) x 260 mm (height) x 92 mm (depth)Weight: < 5 kg
Typical PowerConsumption
IDURTN 610 < 35 WRTN 620 < 78 W
ODU < 40 W
Ambient
Temperature
IDU –5°C to +50°C
ODU –35°C to +55°C
Power Supply –38.4 V to –72 V
Equalization Time domain equalization
Heat DissipationRTN 610: natural heat dissipationRTN 620: intelligent fans (when the ambient temperature is low, the RTN 620 adopts natural heat dissipation.)
HumidityIDU: 5% to 95%
ODU: 5% to 100%
Altitude (Operational) 4,500 meters (15,000 ft)