www.avielo.com

op

tix

3D

op

tix 3D

The new optix 3D is a first class single chip 3D DLP®

projector at up to full 1920 x 1080 pixel resolution. No

interlacing or other picture compression technologies.

Said simply, it is the only single chip DLP projector that

actually keeps its high resolution in 3D, displaying even the

most graphically challenging and complex applications in

stunning 3D.

optix 3D

avielo by projectiondesign home cinema projectors are

designed, manufactured, and caressed in house. Our

philosophy, goal and desire are to serve you with the best

image quality available anywhere. Therefore, we keep it

all in house, with direct control over all development and

manufacturing.

Our entire team is built up of highly passionate video and

film enthusiasts, all dedicated to bringing the real cinema

experience closer to you. By combining passion and

knowledge with state of the art technology, we believe

we can contribute to an unmatched experience in your

home cinema.

Quality is our outmost concern. Selling a projector for

home cinema is not just like selling any product. It is

selling our dedication and lifestyle, and at the same time

attending to yours.

avielo by projectiondesign

op

tix

3D

3D supportWith the optix 3D we support most of the available 3D

formats existing today, we have a unique system which

is module based and can be installed on the rear end of

the projector (XPort™). The optix 3D can not only be used

as a bluray 3D projector, but also to support 3D gaming,

3D photo, 3D broadcast and other 3D formats in all

resolutions and with close to no limitations. optix 3D is

the ultimate solution for the home theater. The projector

has built in support for DLPLink™ active shutter glasses, RF

and IR 3D glasses.

the optix 3D is a powerful and robust projector in a small

chassis. Along with a wide range of lenses and rotation

options, it has close to unlimited installation flexibility,

whether you want ultra-wide on axis or off axis long

throw, or even rear projection, perfect for installations in

everything from a small home theater to large customized

theater

Installation flexibility

The DLP technology from Texas Instruments® is chosen

for its unmatched reliability, and its image quality. With

a widely recognised and proven reliability record and

high brightness and contrast, all whilst displaying utterly

natural colours, it is the obvious choice for heavy duty

applications that run continuously, or are mission critical.

Independent testing has proven DLP technology to be

the most reliable of all microdisplays; not degrading

when subjected to UV light, inherent in all projectors.

Unlike competing technologies, which can show

severe image quality degradation after only a few

thousand hours, DLP technology remains constant

over hundreds of thousands of hours of operation with

no image degradation at all.

DLP technology – chosen for reliability

op

tix 3D

Real Life view Full

Line by Line

Side by Side

Top/Bottom

Checkerboard

The avielo optix 3D does not compromise

the picture quality. Unlike other projectors in

the market utilising various technologies that

actually reduce the resolution in 3D mode,

we ensure users get fully uncompressed 3D

at full 120 frames per seconds (see illustration

right). To you that means an exceptional real

life view unmatched by any other projector,

offering possibilities indispensible for those

working on a micro level of interventions, or

those who simply requires the best possible

image.

120 Hz refresh rateWith its high refresh rate of up to 120Hz full

frame, you get twice the amount of pictures

per second, eliminating judder and motion

blur with fast-motion content, perfect for

installations like medical, simulation and

training.

op

tix

3D

What is it? The XPort™ DCC120 Dual Channel Combiner

is a unique optional image processor built for

optix 3D with XPort™ 1 extended connectivity:

It allows any system setup to benefit from

120Hz frame rate on digital inputs, reducing

image smear and judder, whilst at the same

time enabling all formats of 3D from any input.

What does it do? The Xport™ DCC120 converts any two

connectors of either DVI-D, VGA, HDMI 1.3 or

1.4, 3G-SDI or DisplayPort into one sequential

stream of up to 120Hz. Perfect for any existing

infrastructure, adding benefits to this whilst

saving cost.

Dual Channel Combiner – DCC120. Flexibility in a little connector. The new XPort™

DCC120 makes the most of your new or

existing infrastructure, making any system

benefit from an amazing image quality, double

the bandwith, and by combining any two input

signals it supports any 3D formats. It gives you

benefits not only measured in pixel precision

and reduced artefacts, but also it is the most

comprehensive 3D converter supporting any 3D

format available.

Available XPort™ options, optix 3D projector

What is it? The XPort™ HDMI 1.4 is a module with

two HDMI 1.4 connectors with supporting

electronics. It support all the new specifications

defined by the HDMI group.It support 3D up

120Hz( Full, Line by line, Side by Side, Top/

Bottom and Checkerboard).

What does it do? The new XPort™ HDMI 1.4 is a module

with two HDMI connectors. It translate a

broad range of signals in standard and non-

standard formats. The XPort™ HDMI 1.4 use

a proprietary image processing technique to

identify the characteristics of an incoming signal

and configure the system to produce the best

possible image.page.

Full bluray 3D support. Flexibility in a little connector. The new XPort™

HDMI 1.4 module uses adaptive frame rate

control, meaning the module allows for any

frame rate in to any refresh rate out. For

example 15fps input to 120hz output. The

module will also use Content Adaptive Motion

Estimation and Motion Compensation to

dramatically improve motion performance,

all frame by frame panning will be perfectly

smooth.

op

tix 3D

“

0.751.121.582.334.30

163

95

82.5 53

378

111.

878

.815

.5

123

Your environmentally friendly choiceProjectors consume the same amount of power

independently of screen size. This means for large

displays, projectors are your environmentally

friendly choice. The power consumption of

regular TV’s rapidly increases with increased

screen size. Every time you double the inch, you

use 4 times as much power! To illustrate: A typical

50” 3D plasma screen will consume approximately

250W. Increasing the size to a 100” 3D plasma

screen it will consume a whopping 1000W.

Comparing this with a projector, which consumes

approximately 350 W regardless of your image

size, you save a considerable amount of energy.

Therefore projectors are your environmentally

friendly choice.

Standardised bolt-on ceiling mount interface

Wide range of projection lenses

Multiple lens options and very wide lens shift adjustment ranges allow for flexibility in installations.

op

tix

3D

Technical specifications optix 3D

projector 16:9 DLP® projector

concept all glass optical design with replaceable projection lenses, lens shift, and mech. shutter

resolution 1920 x 1080 native

brightness up to 2700 ansi lumens

contrast about 7000 : 1 (adjusted)

bit planes / colour depth 12 bits per colour

I/O 2x Dual Link DVI, 2x HDMI, 2x analogue RGBHV, analogue video

2x XPort™ TCP/IP, RS232, IR Frame-lock sync in/out

colour management RealColor™ colour management suite

lenses (ranges to be confirmed)

0.8 : 1 (EN 42) 1.2 - 1.7 : 1 (EN 43) 1.7 - 2.5 : 1 (EN41)

2.5 - 4.6 : 1 (EN 44)

setup, calibration, control, asset management

ProNet™ setup and calibration tool, with built in asset management

installation Table top or ceiling mount

conformances FCC Class A, CE, CUL

power requirements 8.4A 100-240V 50-60Hz, < 1050W

size ( H x W x D) 376 x 510 x 223 mm

weight about 12.5 kg / plus lens

warranty limited 3 years warranty. Up to five years extended warranty available. Conditions apply.

bandwith 330 MHz Dual Link DVI

165 MHz HDMI

operating temperature 0-40°C

602-0760-00

Reginoal contacts:

The Americas projectiondesign LLC

295 North Street, Teterboro, NJ 07608, USA

ph +1 888 588 1024 avielo@projectiondesign.com

UK and Ireland 7200 The Quorum

Oxford Business Park NorthOxford, OX4 2JZUnited Kingdom

Ph +44 1865 487225uk_sales@projectiondesign.com

Germany - Germany, Austria, SwtizerlandStuttgart,Germany

ph +49 (0)7153 958263 mo +49 (0)176 23160345

Netherlands - Benelux regionPostbus 59,

4190CB Geldermalsen,The Netherlands

ph +31 (0) 345753314 fx +47 69 30 45 80

Sweden - Sweden, FinlandFlöjelbergsgatan 7AS-43137 Mölndal

Swedenph +46 705 253 510 fx +47 69 30 45 80

Italy - Italy, Southern EuropeVia Plinio 43,

I-20129 Milano (MI),Italy

ph +39 02 87168210 fx +47 69 30 45 80

Spain – Spain, PortugalGorrondatxe 15, bajo A,

48640 Berango,Spain,

ph 34 676 266 301fx +47 69 30 45 80

www.avielo.com

© 2010 projectiondesign as. All rights reserved. All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice. All values are typical and may vary. Please visit our website for latest specifications and product offerings.

Head Office:

head office

projectiondesign as

Habornveien 53

N-1630 Gamle Fredrikstad, Norway

ph +47 69 30 45 50avielo@projectiondesign.com

Poland - Central and Eastern EuropeChoszczno,PL 73-200,

Polandph +48 883 388 035 fx +47 69 30 45 80

South Africa - Africa, Israel1 Peterhof Close,Hout Bay 7806,

South Africaph + 27 21 79 00 018

fx +47 69 30 45 80

Singapore - Greater ChinaBlock 161 Kallang Way,

#04-05 Kolam Ayer Industrial Estate,Singapore 349247,

Singaporeph +65 9621 7421 fx +47 69 30 45 80

India - SAARC RegionMumbai,

Indiaph +91 98 20 61 06 70

fx +47 69 30 45 80

Dubai - UAE and Middle EastPO Box 17633,

LOB 15 Office 212,JAFZ, Dubai

ph +9714 (4) 8872525 mo +971 (0) 50 657 9827

Panama - Central and South AmericaPaseo Del Mar,

Bayside, Suite 1301, costa Del Este,Panama City,

Republic of Panamaph +507 69 800 555

Hong Kong - Greater China, Taiwan22/F Hing Yip Commercial Centre,

280 Des Voeux Road Central,Hong Kong,

ph +852 2858 9891