opti flux 4000 spec sheet
DESCRIPTION
flowmeterTRANSCRIPT
OPTIFLUX 4000Electromagnetic Flow Sensor
The all-round process specialist
© KROHNE 10/2004 7.02496.21.00
Technical Data Sheet
GR
Subject to change without notice.
Electromagnetic flowmeters
Variable area flowmeters
Mass flowmeters
Ultrasonic flowmeters
Vortex flowmeters
Flow controllers
Level measuring instruments
Pressure and temperature
Heat metering
Communications technology
Switches, counters, displays and recorders
Engineering systems & solutions
● First choice in
electromagnetic flowmeters
● Robust and reliable
● 250,000 units in operation
● Conductivity down to 1 µS/cm
● Temperature up to 180°C
2 OPTIFLUX 4000
OPTIFLUX 1000
Fields of application
Industries● Chemical● Paper & Pulp● Water & Wastewater● Metals & Mining● Power● Oil & Gas● Pharmaceuticals
Application examples● Suitable for all applications ● From clean liquids to slurries and
pastes with high solids content ● Abrasion, chemical and
vacuum resistant, and for hightemperatures
OPTIFLUX 4000The all-round process specialist
The OPTIFLUX 4000 electromagnetic flow sensor is the proven choice when selecting aflowmeter.
This versatile flowmeter is suitable for almost all applications in all industries.
OPTIFLUX 4000The all-round process specialist
Highlights● Proven choice in electromagnetic flowmeters● Robust & reliable● More than 250,000 units operating in the field● The result of more than 50 years of experience● Also available with two-wire technology (OPTIFLUX 4040 C)
Product features● Easy to select, fit and forget● Chemically resistant to alkaline solutions and acids● Diameter range: DN 2.5 - 3000● Standard liners: PTFE, PFA, ETFE● Various electrode materials available● Conductivity
- non water >1 µS/cm
- water >20 µS/cm● Process temperature up to 180ºC● Hazardous area versions available
DN 2.5 ... 30001/10” ... 120”
most
dimensionally
stable PFA liner
with stainless-steel
mesh
All Ex approvals
> 1 µS/cmup to 180°C / 356°F
housing and flanges available in stainless steel
OPTIFLUX 4000
3OPTIFLUX 4000
C F W C W
OPTIFLUX 2000
Water and waste-water specialist
OPTIFLUX 4000
All-round processspecialist
OPTIFLUX 5000
Highly accurate &abrasion resistant
OPTIFLUX 6000
Sanitary andhygienic solution
IFC 300 IFC 010
One for all applications Economic converter
OPTIFLUX converters
Special-purpose flowmeters
OPTIFLUX 1000
Economicalsolution
OPTIFLUX 4040 C
The 2-wire EMF TIDALFLUX 4110 PF
For partially filledpipelines
OPTIFLUX 7300 C
The electrode-freeEMF
BATCHFLUX 5015 C
For volumetric filling
All converters fit to all sensors
The complete OPTIFLUX - range
OPTIFLUX sensors
OPTIFLUX 4000
4 OPTIFLUX 4000
Technical data � � -
ANSI [inch] 1/10
"
1/8"
1/4"
3/8"
1/2"
3/4" 1"
1 1/
4
1 1/
2
2"
2 1/
2
3" 4" 5" 6" 8" 10"
12"
14"
16"
18"
20"
24"
28"
32"
36"
40"
48"
56"
64"
72"
80"
DN [mm] 2.5 4 6 10 15 20 25 32 40 50 65 80 100
125
150
200
250
300
350
400
450
500
600
700
800
900
1000
1200
1400
1600
1800
2000
EN 1092-1 - PN 40 � � � � � � � � � � � � � � � � � � � � � � � - - - - - - - - -
EN 1092-1 - PN 25 - - - - - - - - - - � - � � � � � � � � � � � - - - - - - - - -
EN 1092-1 - PN 16 - - - - - - - - - - � - � � � � � � � � � � � - - - - - - - - -
EN 1092-1 - PN 10 - - - - - - - - - - - - - - - � � � � � � � � � � � � - - - - -
EN 1092-1 - PN 6 - - - - - - - - - - - - - - - - - - - - - - - - - - - � � � � �
ISO insertion length - - - - � � � � � � � � � � � � � � � � � � � - - - - - - - - -
ANSI B16.5 - 150 lbs RF � � � � � � � � � � � � � � � � � � � � � � � � ≤ 10 bar � ≤ 6 bar
ANSI B16.5 - 300 lbs RF � � � � � � � � � � � � � � � � � � � � � � � - - - - - - - - -
JIS 10 K - - - - - - - - - � � � � � � � � � � � � � � � � � � - - - - -
JIS 20 K � � � � � � � � � - - - - - - � � � � � � � � - - - - - - - - -
DN > 2000 / 80" on request.
PTFE - - - � � � - - - - - - - - - � � � � � � � � - - - - - - - - -
PFA � � � - - - � � � � � � � � � - - - - - - - - - - - - - - - - -
ETFE - - - - - - - - - - - - - - - � � � � � � � � � � � � � � � � �
PU (Irathane) - - - - - - - - - - - - - - - � � � � � � � � � � � � � � � � -
Hardrubber (Ex only ) - - - - - - - - - - - - - - - � � � � � � � � � � � � � � � � �
Hastelloy C4 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Hastelloy B2, Platinum, Stainless
steel 316 Ti (1.4571), Titanium� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Tantalum � � � � � � � � � � � � � � � � � � � � � � � � � � � - - - - -
Low noise HC4
Low noise SS 316 Ti (1.4571)- - - � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Stainless steel 316 Ti (1.4571)** � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Hastelloy C4*** - - - � � � � � � � � � � � � � � � � - - - - - - - - - - - - -
Hastelloy B2***, Titanium*** - - - � � � � � � � � � � � � � � � � - - - - - - - - - - - - -
Tantalum (ring #1 and #2 only ) - - - � � � � � � � � � � � � � � � � - - - - - - - - - - - - -
Steel A105 (1.0038) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Stainless steel 304 (1.4306) � � � � � � - - - - - - - - - - - - - - - - - - - - - - - - - -
Stainless steel 316 L (1.4404) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Stainless steel 316 Ti (1.4571) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Measuring tube
Housing (poly urethane coated)
Connection box (PU-coated)
Standard
Standard
Option
Non-Ex
EEx zone 1 / 2
FM - class I div . 1 / 2
CSA - GP / class I div . 1 / 2
SAA - Aus Ex zone 1 / 2
TIIS - zone 1 / 2
Compact + IFC 300 C
Separate + IFC 300 F, R, W
Compact + IFC 010 C
Separate + IFC 010 W
Non-w ater
Water
�
�
�
-
-
-
�
�
�
IP 68 field eq. NEMA 6P (Connection box : Stainless steel)
IP 68 factory eq. NEMA 6P (Connection box : Stainless steel)
IP 66 / 67 eq. NEMA 4/4X / 6
-
Optional
**** st. steel Duplex (1.4462).
Approvals
for flow
sensor
Liner
Grounding
rings
Electrodes
other materials on request
Protection
category
Materials
used
other materials on request
Insulation
class
>10µS/cm
SS****
min. 1 µS/cm
Nominal
flange
pressure
(for v acuum
load see
separate
table)
Electrical
conductivity
Flanges
E
H
min. 20 µS/cm
H
Versions
�
�
�
�
-
On request
DN 2.5 - 6 (1/10 - 1/4"): DN 10 or 15 (1/2") conn. DN 2.5 - 6 (1/10 - 1/4"): SS Duplex (1.4462).
Standard Optional
Nominal
diameter
Die-cast aluminium (Option: Stainless steel)
Austenitic stainless steel
Sheet steelGTW-S 30
** DN 2.5 - 6: ring #1 av ailable; DN 10 - 2000: ring #1, #2 and #3 av ailable. *** Ring #1, #2 and #3 av ailable.
The responsibility as to the suitability, intended use and corrosion resistance of the materials used in their constructionrests solely with the purchaser.
OPTIFLUX 4000
5OPTIFLUX 4000
Liner mm [bar] 40°C 60°C 70°C 80°C 90°C 100°C 120°C 140°C 180°C
PFA DN 2.5 - 150 50 0 0 0 0 0 0 0 0 0
Hardrubber DN 200 - 300 150 250 400 400 400 - - - - -
DN 350 - 3000 150 500 600 600 600 - - - - -
ETFE DN 200 - 2000 150 100 100 100 100 100 100 100 - -
PTFE DN 10 - 20 50 0 0 0 0 0 0 500 750 1000
DN 200 - 300 50 500 750 1000 1000 1000 1000 1000 1000 1000
DN 350 - 600 50 800 1000 1000 1000 1000 1000 1000 1000 1000
PU (Irathane) DN 200 - 1800 1500 500 600 - - - - - - -
Liner inches [psi] 104°F 140°F 158°F 176°F 194°F 212°F 248°F 284°F 356°F
PFA 1/10" - 6" 725 0 0 0 0 0 0 0 0 0
Hardrubber 8" - 12" 2176 3.6 5.8 5.8 5.8 - - - - -
14" - 120" 2176 7.3 8.7 8.7 8.7 - - - - -
ETFE 8" - 72" 2176 1.5 1.5 1.5 1.5 1.5 1.5 1.5 - -
PTFE 3/8" - 3/4" 725 0 0 0 0 0 0 7.3 10.9 14.5
8" - 12" 725 7.3 10.9 14.5 14.5 14.5 14.5 14.5 14.5 14.5
14" - 24" 725 11.6 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5
PU (Irathane) 8" - 72" 21756 7.3 8.7 - - - - - - -
Pressure limits
Pressure limits
Max. pressure
Max. pressure Vacuum load in psia at a process temperature of ....
Vacuum load in mbar abs. at a process temperature of ....
Vacuum load
min. max. min. max. min. max. min. max.
PTFE / PFA -40°C 180°C -40°C 65°C PTFE / PFA -40°F 356°F -40°F 149°F
ETFE -40°C 120°C -40°C 65°C ETFE -40°F 248°F -40°F 149°F
Hardrubber (Ex only) -5°C 80°C -25°C 65°C Hardrubber (Ex only) 23°F 176°F -13°F 149°F
Irathane -5°C 65°C -25°C 65°C Irathane 23°F 149°F -13°F 149°F
min. max. min. max. min. max. min. max.
with IFC 300
OPTIFLUX 4300 C140°C -40°C 65°C
with IFC 300
OPTIFLUX 4300 C 284°F -40°F 149°F
with IFC 010
OPTIFLUX 4010 C120°C -25°C 60°C
with IFC 010
OPTIFLUX 4010 C 248°F -13°F 140°F
Ambient
see
above
see
above
Compact flowmeter Compact flowmeterProcess Ambient
Flow sensorProcess
Temperature range
Process Ambient
Flow sensorProcess Ambient
OPTIFLUX 4000
6 OPTIFLUX 4000
Dimensions and weights
Flow sensor
DINISO
13 359T box TIFC010 T IFC300
2.5 40 130 - 142 90 219 - 297 3.0
4 40 130 - 142 90 219 - 297 3.0
6 40 130 - 142 90 219 - 297 3.0
10 40 150 - 165 121 242 270 320 5.0
15 40 150 200 165 121 242 270 320 5.0
20 40 150 200 165 121 242 270 320 7.0
25 40 150 200 141 115 218 246 296 7.0
32 40 150 200 157 140 234 262 312 8.0
40 40 150 200 166 150 243 271 321 8.0
50 40 200 200 185 165 262 290 340 8.0
65 16 200 200 199 185 276 304 354 10.0
80 40 200 200 209 200 286 314 364 12.0
100 16 250 250 237 220 314 342 392 15.0
125 16 250 250 266 250 343 371 421 19.0
150 16 300 300 299 285 376 404 454 22.0
200 10 350 350 357 340 434 462 512 34.0
250 10 400 400 405 395 482 510 560 48.0
300 10 500 500 455 445 532 560 610 58.0
350 10 500 550 507 505 584 612 662 78.0
400 10 600 600 563 565 640 668 718 98.0
450 10 600 x 613 615 690 718 768 x
500 10 600 x 667 670 744 772 822 128.0
600 10 600 x 777 780 854 882 932 164.0
700 10 700 x 893 895 970 998 1048 245.0
800 10 800 x 1009 1015 1086 1114 1164 328.0
900 10 900 x 1111 1115 1188 1216 1266 425.0
1000 10 1000 x 1221 1230 1298 1326 1376 507.0
* Total fitting length:
Flowmeter supplied with separate grounding rings:
Dimension L + 2 x 3 mm + 2 x gasket thickness
Tolerances for fitting length dimensions L to ISO DIS 13 359
DN ≤ 200 / ≤ 8" : +0/-3 mm (0.12")
DN ≥ 250 / ≥ 10" +0/-5 mm (0.2")
** Approx. weight of meter body with DIN flanges.
All flanges according to EN 1092 -1
- not available x dimensions and weights on request
Approx.
weight in
kg**H W
Nominal size
L*DN
[mm]
TPN
[bar]
Dimensions in mm
OPTIFLUX 4300 C
OPTIFLUX 4010 C
OPTIFLUX 4000 F
T box TIFC010 T IFC300 T box TIFC010 T IFC300
1/10" 284 5.12 8.23 3.50 11.26 - 14.33 x 130 209 89 286 - 364 x
1/8" 284 5.12 8.23 3.50 11.26 - 14.33 x 130 209 89 286 - 364 x
1/4" 284 5.12 8.23 3.50 11.26 - 14.33 x 130 209 89 286 - 364 x
3/8" 284 5.12 8.23 3.50 11.26 - 14.33 13.2 130 209 89 286 - 364 6.0
1/2" 284 5.12 8.23 3.50 11.26 12.36 14.33 13.2 130 209 89 286 314 364 6.0
1" 284 5.91 5.39 4.25 8.43 9.53 11.50 17.6 150 137 108 214 242 292 8.0
1 1/2" 284 5.91 6.10 5.00 9.13 10.24 12.20 19.8 150 155 127 232 260 310 9.0
2" 284 7.87 7.05 6.00 10.08 11.18 13.15 17.6 200 179 152 256 284 334 8.0
3" 284 7.87 8.03 7.50 11.06 12.17 14.13 29.0 200 204 191 281 309 359 13.2
4" 284 9.84 9.49 9.00 12.52 13.62 15.59 40.0 250 241 229 318 346 396 18.1
5" 284 9.84 10.55 10.00 13.58 14.69 16.65 x 250 268 254 345 373 423 x
6" 284 11.81 11.69 11.00 14.72 15.83 17.80 58.0 300 297 279 374 402 452 26.3
8" 284 13.78 14.29 11.00 17.32 18.43 20.39 95.0 350 363 279 440 468 518 43.1
10" 284 15.75 16.77 13.50 19.80 20.91 22.87 140.0 400 426 343 503 531 581 63.5
12" 284 19.69 20.08 16.00 23.11 24.21 26.18 210.0 500 510 406 587 615 665 95.3
14" 284 27.56 20.71 19.00 23.74 24.84 26.81 285.0 700 526 483 603 631 681 129.3
16" 284 31.50 23.07 21.00 26.10 27.20 29.17 365.0 800 586 533 663 691 741 165.6
20" 284 31.50 27.09 23.50 30.12 31.22 33.19 492.0 800 688 597 765 793 843 223.2
24" 284 31.50 31.50 32.00 34.53 35.63 37.60 675.0 800 800 813 877 905 955 306.2
28" 145 35.43 35.98 36.50 39.02 40.12 42.09 x 900 914 927 991 1019 1069 x
32" 145 39.37 40.75 41.73 43.78 44.88 46.85 x 1000 1035 1060 1112 1140 1190 x
36" 145 43.31 44.96 46.00 47.99 49.09 51.06 x 1100 1142 1168 1219 1247 1297 x
40" 145 47.24 49.41 50.75 52.44 53.54 55.51 x 1200 1255 1289 1332 1360 1410 x
48" 145 55.12 57.87 59.50 60.91 62.01 63.98 x 1400 1470 1511 1547 1575 1625 x
72" 145 78.74 82.80 86.50 85.83 86.93 88.90 x 2000 2103 2197 2180 2208 2258 x
80" 145 86.61 95.39 99.75 98.43 99.53 101.50 x 2200 2423 2534 2500 2528 2578 x
T box TIFC010 T IFC300 T box TIFC010 T IFC300
1/10" 740 5.12 8.23 3.75 11.26 - 14.33 x 130 209 95 286 - 364 x
1/8" 740 5.12 8.23 3.75 11.26 - 14.33 x 130 209 95 286 - 364 x
1/4" 740 5.12 8.23 3.75 11.26 - 14.33 x 130 209 95 286 - 364 x
3/8" 740 5.12 8.23 3.75 11.26 - 14.33 x 130 209 95 286 - 364 x
1/2" 740 5.12 8.23 3.75 11.26 12.36 14.33 x 130 209 95 286 314 364 x
1" 740 5.91 5.71 4.87 8.74 9.84 11.81 x 150 145 124 222 250 300 x
1 1/2" 740 7.87 6.65 6.13 9.69 10.79 12.76 x 200 169 156 246 274 324 x
2" 740 9.84 7.32 6.50 10.35 11.46 13.43 x 250 186 165 263 291 341 x
3" 740 9.84 8.43 8.25 11.46 12.56 14.53 x 250 214 210 291 319 369 x
4" 740 11.81 10.00 8.25 13.03 14.13 16.10 x 300 254 210 331 359 409 x
6" 740 12.60 12.44 12.50 15.47 16.57 18.54 x 320 316 317 393 421 471 x
- not available
** Total fitting length: Flowmeter supplied with separate grounding rings: Dimension L + 2 x 0.12" + 2 x gasket thickness.
*** approx. weight of meter body with ANSI flanges. Flanges ANSI 1/10" - 24" to ANSI B 16.5. Flanges ANSI 28" and above to ANSI B 1647 A.
Approx.
weight in
kg***
Nominal size Approx.
weight in
lbs***ANSI [psig]*
Dimensions for 300 lbs flanges in mmDimensions for 300 lbs flanges in inches
T H L**
* At 68°F / 20°C. x Dimensions and weights on request.
ANSI [psig]*T
W
W
Approx.
weight in
kg***
Dimensions for 150 lbs flanges in inches Approx.
weight in
lbs***
T L** H W
Dimensions for 150 lbs flanges in mm
L** H
H WT
Nominal size
L**
OPTIFLUX 4000
7OPTIFLUX 4000
Flow sensor
Australia
KROHNE Australia Pty Ltd Quantum Business Park10/287 Victoria RdRydalmere NSW 2116TEL.: +61 2 8846 1700FAX: +61 2 8846 1755e-mail: [email protected]
Austria
KROHNE Austria Ges.m.b.H.Modecenterstraße 14A-1030 WienTEL.: +43(0)1/203 45 32FAX: +43(0)1/203 47 78e-mail: [email protected]
Belgium
KROHNE Belgium N.V.Brusselstraat 320B-1702 Groot BijgaardenTEL.: +32(0)2-4 66 00 10FAX: +32(0)2-4 66 08 00e-mail: [email protected]
Brazil
KROHNE ConautControles Automaticos Ltda.Estrada Das Águas Espraiadas, 230 C.P. 5606835 - 080 EMBU - SPTEL.: +55(0)11-4785-2700FAX: +55(0)11-4785-2768e-mail: [email protected]
China
KROHNE Measurement Instruments(Shanghai) Co. Ltd., (KMIC)Room 1501, Tower ACity Centre of Shanghai100 Zun Yi RoadShanghai 200051TEL.: +86 21 6237 2770FAX: +86 21 6237 2771Cellphone: +86 (0) 139 01954185e-mail: [email protected]
CIS
Kanex KROHNE Engineering AGBusiness-Centre Planeta, Office 403ul. Marxistskaja 3109147 Moscow/RussiaTEL.: +7(0)095-9117165FAX: +7(0)095-9117231e-mail: [email protected]
Czech Republic
KROHNE CZ, spol. s r.o.Sobe×s×ická 156CZ-63800 BrnoTEL.: +420 545 532 111FAX: +420 545 220 093e-mail: [email protected]
AlgeriaArgentinaBelarusBulgariaCamaroonCanadaChile ColombiaCroatiaDenmarkEcuadorEgyptEstoniaFinlandFrench AntillesGreeceGuineaHong KongHungaryIndonesiaIvory CoastIranIrelandIsrael
Japan JordanKuwaitLatviaLithuaniaMaroccoMauritiusMexicoNew ZealandPakistanPeruPolandPortugalSaudi ArabiaSenegalSlovakiaSloveniaSwedenTaiwanThailandTurkeyTunesiaVenezuelaYugoslavia
France
KROHNE S.A.S.Les OrsBP 98F-26103 ROMANS CedexTEL.: +33(0)4-75 05 44 00FAX: +33(0)4-75 05 00 48e-mail: [email protected]
Germany
KROHNE MesstechnikGmbH & Co. KGLudwig-Krohne-Str.D-47058 DuisburgTEL.: +49(0)203-301-0FAX: +49(0)203-301-10 389e-mail: [email protected]
India
KROHNE Marshall Ltd.A-34/35, M.I.D.C.Industrial Area, H-Block,Pimpri Poona 411018TEL.: +91(0)202-7442020FAX: +91(0)202-7442020e-mail: [email protected]
Iran
KROHNE Liaison Office North Sohrevardi Ave.26, Sarmad St., Apt. #9 Tehran 15539 TEL.: ++98-21-874-5973 FAX: ++98-21-850-1268 e-mail: [email protected]
Italy
KROHNE Italia Srl.Via V. Monti 75I-20145 MilanoTEL.: +39(0)2-4 30 06 61FAX: +39(0)2-43 00 66 66e-mail: [email protected]
Korea
KROHNE Korea Room 508 Miwon Bldg 43 Yoido-Dong Youngdeungpo-Ku Seoul, Korea TEL.: 00-82-2-780-1743 FAX: 00-82-2-780-1749 e-mail: [email protected]
Netherlands
KROHNE AltometerKerkeplaat 12 NL-3313 LC DordrechtTEL.: +31(0)78-6306300FAX: +31(0)78-6306390e-mail: [email protected]
Netherlands
KROHNE Nederland B.V.Kerkeplaat 12NL-3313 LC DordrechtTEL.: +31(0)78-6306200FAX: +31(0)78-6306405Service Direkt: +31(0)78-6306222e-mail: [email protected]
Norway
KROHNE Instrumentation A.S.Ekholtveien 114 NO-1526 MossP.O. Box 2178, NO-1521 MossTEL.: +47(0)69-264860FAX: +47(0)69-267333e-mail: [email protected]: www.krohne.no
Singapore
Tokyo Keiso - KROHNE Pte. Ltd.27 Kian Teck Drive JurongSingapore 628844SingaporeTEL.: ++65-62-64-3378FAX: ++65-62-65-3382
South Africa
KROHNE Pty. Ltd.163 New RoadHalfway House Ext. 13MidrandTEL.: +27(0)11-315-2685FAX: +27(0)11-805-0531e-mail: [email protected]
Spain
I.I. KROHNE Iberia, S.r.L.Poligono Industrial NiloCalle Brasil, n°. 5E-28806 Alcalá de Henares -MadridTEL.: +34(0)91-8 83 21 52FAX: +34(0)91-8 83 48 54e-mail: [email protected]
Switzerland
KROHNE AGUferstr. 90CH-4019 BaselTEL.: +41(0)61-638 30 30FAX: +41(0)61-638 30 40e-mail: [email protected]
United Kingdom
KROHNE Ltd.Rutherford DrivePark Farm Industrial EstateWellingborough,Northants NN8 6AE, UKTEL.: +44(0)19 33-408 500FAX: +44(0)19 33-408 501e-mail: [email protected]
USA
KROHNE Inc.7 Dearborn RoadPeabody, MA 01960TEL.: +1-978 535-6060FAX: +1-978 535-1720e-mail: [email protected]
Other Representatives
Other Countries
KROHNE MesstechnikGmbH & Co. KGLudwig-Krohne-Str.D-47058 DuisburgTEL.: +49(0)203-301-309FAX: +49(0)203-301 389e-mail: [email protected]
Subject to change without notice