operating limits priux master - salmson · l1 l3 l2 l3 l1 l2 pe ssm 3~230 v, 50/60 hz ln pe ssm 1~...
TRANSCRIPT
17
0 Qm3/h 60
Hm
Priux master / D
PRIUX MASTER
For accelerated water circulation for heating or cooling, with optimization of circulator operating point.• Central heating,• Urban heating,• Commercial or industrial installations;• Cooling circuits.
• Air-conditioning systems• New, old (renovated) installations or
extensions.
Circulating pumps recommended for facili-ties fitted with thermostatic valves.
APPLICATIONS
Flows rates up to: 60 m3/hHeads up to: 17 m CEMax. operating pressure: 10 barTemperature range: -20° to +110°CMax. ambient temperature: +40°CND of ports: 25 to 100EEI single pump: ≤0,23EEI double pump: ≤0,27
The benchmark for most efficient circulators is EEI ≤ 0,20
OPERATING LIMITS
SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS
STANDARD RANGEHeating - Air-conditioning
ADVANTAGES
• Energy savings
• All-purpose
• Noise reduction
• Reliability
• Ergonomics
N.T. N° 122-6/ENG. - Ed.3/12-14
Constant speed : feature available in the course of 2015, on the whole range.
1
PRIUX MASTER
• Hydraulic partSingle or double body with threaded or flan-ged. 3D impellers and spiral for maximum optimization of the hydraulic performances.An impeller seal between the pump body and the impeller improves performances further by limiting the internal recycling of the fluid. The pump body is fully cataphoresis coated to ensure corrosion resistance.
• Motor230 V – 50 - 60 Hz single-phaseWet rotor motor; bearing bushes lubricated by the fluid pumped.E.C.M. (Electronically Commutated Motor) synchronous motor, equipped with a perma-nent magnet rotor.The stator’s rotating magnetic field is genera-ted by the electronic switching of the coils.This rotating field creates a continuous tor-que through attraction between the rotor’s opposite magnetic poles, controlling its po-sition (synchronous motor). This ensures the optimum performance of the motor, whatever its speed.The wet rotor and the windings are separa-ted by a composite, and therefore completely amagnetic, sleeve, to reduce motor losses.
Speed: 800 to 4800 rpmMains voltage: 1-ph. 230 V ± 10 %Frequency: 50 Hz - 60 HzInsulation class: F (155° C)Protection index: IPX4DEMC compliance: EN 61800-3 emission EN 61000-6-3 immunity EN 61000-6-2
•Protection differential (FI)«All current» FI protection differentials com-pliant with EN 61008-1 are permitted. These differential circuit breakers are identified by
or .
ADVANTAGESDESIGN• Energy savingsHigh efficiency circulators, with optimization of the operating point. Energy savings of up to 80% compared to a traditional circulator.
• All-purposeThese circulators are compatible with all types of heating, air-conditioning and refrige-ration systems. The standard version covers a fluid temperature range from –20°C to +110°C.
• Noise controlEliminating of whistling and hydraulic noises in the thermostatic valves. Automatic adap-ting of speeds to the system’s needs.
• Reliability Fully automatic operation requiring neither venting nor servicing. A double filter system prevents solid particles from getting into the rotor chamber. A rotating seal between the impeller and the endshield limits water ex-changes with the motor to the bare minimum.
• ErgonomicsThe control module of the Priux master is freely accessible. One single button is used for the selection of the operating mode and the setting of the delivery head setpoint. A plug is used for the electrical connection. It is possible to remove the plug from the module and open it. Thus the electrical connec-tion can be done in an easy and safe way.
Pressure gauge tappings on the flanges.
STANDARD CONSTRUCTIONMain parts MaterialPump casing EN GJL 250
EN GJL 200 for ND 25-32Impeller Glass fibre reinforced PPS
PPE for ND 25-32Shaft Chromium steel (X46 – Cr13)Bearing bushes Metal impregnated carbon
Filter3-D Impeller
Spiral seal
3-D body
Condensate Evacuation
IDENTIFICATIONPriux master 32 - 65
Priux master D High efficiencycirculator
Single pump or D : double pump
Nominal diameter (ND)of suct/dis. flanges
Head (in dm)at nominal flow
Priux with EC motor
SXE with AC motor
2
L1 L3
L2 L3
L1 L2
PE SSM
3~230 V, 50/60 Hz
L N PE SSM
1~ 230 V, 50/60 Hz
L N PE SSM
PRIUX MASTER
POSSIBLE ASSEMBLY
CONNECTIONS
On vertical or horizontal pipes the motor shaft must always be horizontal.
• terminal
L – N: mains connection, 230 V – 50 Hz- 60 Hz single-phase current
PE: earth
SSM: dry contact for fault indicator (nor-mal closed, open by default). Max load: 1 A – 250 V – AC
The electrical connection is done in the connector which can be removed from the electronic module
• Connector
• Main connection
Connection to a 1~230V network Or between two phases of a 3~230V network
3
H min
H n
H
Q
Mode ∆P constant
Zone de fonctionnementnon utilisée
Fonctionnement en ∆P constant
H min
H n
1/2 H n
H
Q
Mode ∆P variable
Economie supplémentaireréalisée par rapportau mode ∆P constant
Fonctionnement en ∆P variable
PRIUX MASTER
OPERATING PRINCIPLE
Electronic module maintains constant the differential pressure pro-duced by the pump at the differential pressure value of Hn instruction, up to the curve of operating data through the authorized flow rating.
Electronic module modifies linearly the differential pressure value between Hn and 1/2 Hn instruction to be met by the pump. Differential pressure value of H instruction increases or decreases acc. to the requested flow rate.
∆P Constant Mode ∆P Variable Mode
Operation area not used
Additional sa-vings compared with constant ∆P mode
The heating or air-conditioning needs of a building vary according to whether it is day or night, but also during the day according to changes in the outside temperature, etc., and even from one point of the building to another as the thermostatic valves or 2-way valves are closed. The self-regulated circulator automatically adjusts its rotation speed according to the mains network’s friction losses, in order to maintain a minimum electricity consumption (ECM technology) and a low operating noise level. The circulator’s properties are adjusted automatically according to the heating or cooling needs of the system.
• Manual adjustmentParameterization of basic functions, i.e.:- control mode ∆P constant ∆P variable- pressure setpoint adjustment- speed selection.
• Constant pressure With this regulation mode, electronic control maintains the constant differential pressure of the circulating pump whatever the flow rate, depending on the predefined pressure value.
• Variable pressure With this regulation mode, the electronic control allows reducing the differential pressure (manometric head) in case of flow reduction, depending on the predefined differential pressure value.
• Speed selection (rated power P2≥600W)The rotation speed can be adjusted manually on 3 predefined constant values (depending on models).
• Remote monitoring (SSM)In addition, a dry contact (open by default) allows the remote monito-ring of any operating incident (e.g. through a building management system).
• Double circulators (or two single pumps installed in parallel)The Duty/Stand-by operation mode is allowed.For an automatic fault-actuated switchover, a switchgear using the collective fault signal available on the pump (SSM) is required on site.Parallel operation is not permissible, since the pumps can interfere with each other’s operating behaviour.
OPERATING PRINCIPLE
4
PRIUX MASTER
TABLE OF FUNCTIONS
Priux master Priux master-D
Operating modes
Speed selection ( n = constant) P2≥600W P2≥600W
∆p-c for constant differential pressure • •
∆p-v for variable differential pressure • •
Manual functions
Adjustment of operating mode • •
Adjustment of differential-pressure setpoint • •
Adjustment of speed (manual setting mode) 3 predefined values 3 predefined values
Automatic functions
Smooth adjustment of power depending on the operating mode • •
Deblocking function • •
Soft start • •
Full motor protection with integrated trip electronics • •
Signal and display functions
Collective fault signal (potential free NC contact) • •
Fault light • •
7 segments LED display for showing pressure setpoint and fault codes • •
Dual pump management (double pumps or 2 x single pumps)
Main/standby pump operation switchgear required on site switchgear required on site
Parallel operation — —
Equipment / scope of delivery
Wrench attachment point on pump body Threaded types with P2 < 200 W —
Double changeover valve in pump housing — •
Cable entry possible on both sides — —
Integrated air separator for automatic rapid ventilation Rp 3/8 — —
Plug-in slot for optional extension with SALMSON IF modules — —
Blocking-current-proof motor — —
Incl. seals for threaded connection or flanges (loose) • •
Incl. installation and operating instructions • •
Heat insulation accessory in option —
Incl. washers and bolts for flanges (for DN 32 - DN 100 nominal connection diameters) • •
Particle filter • •
• = available ; — = not available
5
PRIUX MASTER
TECHNICAL DATA - PRIUX MASTER
25-5
5
25-6
5
25-9
0
32-5
5
32-6
5
32-9
0
40-3
0
40-6
0
40-8
0
40-1
10
50-6
0
50-7
0
50-8
0
50-1
10
65-8
0
65-9
0
65-1
10
80-4
0
80-9
0
100-
90
Approved fluids(other fluids on request)
Heating water (as per VDI 2035) •
Water/glycol-mixtures (max. 50%; mixtures with more than 20 % glycol content require rechecking of the pumping data)
•
Drinking water and water for food businesses in accordance with TrinkwV 2001 —
Performance
Max. delivery head [m] 7 10 12 7 10 12 5 8 12 17 8 9 11 16 9 11 17 7 13 13
Flow rate max. [m3/h] 7 8 11 7 8 11 11 14 19 29 14 24 28 44 28 40 56 45 63 63
Permitted field of application
Temperature range when used in heating, ventilation & air conditioning systems- at max. ambient temperature +40 °C [°C]
-20 to +110
Temperature range for usein drinking-water circulation systems
- at max. ambient temperature +40 °C [°C] —
- at max. ambient temperature +40 °C in short-term operation 2 h [°C] —
Max. permissible total hardness in drinking watercirculation systems [°d] —
Standard version with nominal pressure,p max [bar] 6/10
Pipe connections
Pipe connection Rp 1 1 1 1 1/4 1 1/4 1 1/4
Nominal diameter DN 40 40 40 40 50 50 50 50 65 65 65 80 80 100
Flange for mating flange PN 10, standard version — — — — — — — — — — — — — — — — — • • •
Combination flange PN 6/10 for mating flanges PN 6 and PN 16, standard version — — — — — — • • • • • • • • • • • — — —
Electrical connection
Mains supply connection 1~[V], standard version 230
Mains suppply connection 3 ~[V], standard version 230
Mains supply connection 3 ~[V], with optional switching plug —
Mains frequency [Hz] 50/60
Motor/electronics
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Immunity to interference EN 61000-6-2
Power electronics Frequency converter
Protection class IPX4D
Insulation class F
• = available ; — = not available
6
PRIUX MASTER
TECHNICAL DATA - PRIUX MASTER-D
32-5
5
32-9
0
40-6
0
40-8
0
40-1
10
50-7
0
50-8
0
50-1
10
65-9
0
65-1
10
80-9
0
Approved fluids(other fluids on request)
Heating water (as per VDI 2035) •
Water/glycol-mixtures (max. 50%; mixtures with more than 20 % glycol content require rechecking of the pumping data)
•
Drinking water and water for food businesses in accordance with TrinkwV 2001 —
Performance
Max. delivery head [m] 7 9 8 12 17 9 11 16 11 17 13
Flow rate max. [m3/h] 6,5 12 13,5 17 27 19 22 38 38 53 60
Permitted field of application
Temperature range when used in heating, ventilation & air conditioning systems- at max. ambient temperature +40 °C [°C]
-20 to +110
Temperature range for usein drinking-water circulation systems
- at max. ambient temperature +40 °C [°C] —
- at max. ambient temperature +40 °C in short-term operation 2 h [°C] —
Max. permissible total hardness in drinking watercirculation systems [°d] —
Standard version with nominal pressure,p max [bar] 6/10
Pipe connections
Pipe connection Rp —
Nominal diameter DN 32 32 40 40 40 50 50 50 65 65 80
Flange for mating flange PN 10, standard version — — — — — — — — — — •
Combination flange PN 6/10 for mating flanges PN 6 and PN 16, standard version • • • • • • • • • • —
Electrical connection
Mains supply connection 1~[V], standard version 230
Mains suppply connection 3 ~[V], standard version 230
Mains supply connection 3 ~[V], with optional switching plug —
Mains frequency [Hz] 50/60
Motor/electronics
Electromagnetic compatibility EN 61800-3
Emitted interference EN 61000-6-3
Immunity to interference EN 61000-6-2
Power electronics Frequency converter
Protection class IPX4D
Insulation class F• = available ; — = not available
7
0 2 4 6 8 10
0 0,5 1,0 1,5 2,0 2,5 3,0
0 1 2 3 4 5 6
0
2
4
6
8
10
0
20
40
60
80
100
0 2 4 6 8 100
100
200
300
m/s
Qm³/h
max.
p/kPaPriux master25-90, 32-901~230 V - Rp 1, Rp 1¼
Hm
Δp-cP1 W
Qm³/h
Ql/s
Qm³/h
max.
Δp-vP1 W
Rp 1
Rp 1¼0 1 2 3 4
6m7m8m9m10m11m 5m 4m
3m
2m0,5m 1m
0 2 4 6 8 100
100
200
300max.
6m7m8m9m11m 5m
4m3m
10m
0 2 4 6 8 10
0 0,5 1,0 1,5 2,0 2,5 3,0
0 0,4 0,8 1,2 1,6 2,0 2,4
0
1
2
3
4
5
0
10
20
30
40
50
0 2 4 6 8 100
40
80
120
max.
pkPaPriux master40-301~230 V - DN 40
Hm
Δp-cP1 W
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
Δp-vP1 W
4,5m5m 4m 3,5m 2,5m
1,5m3m 2m
1m
0,5m
max.
0 2 4 6 8 100
40
80
120max.
4,5m5m 4m 3,5m 3m 2,5m 2m
0 1 2 3 4 5 6 7
0 0,4 0,8 1,2 1,6 2,0
0 1 2 3 4
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
70
0 1 2 3 4 5 6 70
50
100
150
max.
p/kPaPriux master25-55, 32-551~230 V - Rp 1, Rp 1¼
Hm
Δp-cP1 W
m/sRp 1
Rp 1¼
Ql/s
Qm³/h
Qm³/h
0 0,5 1,0 1,5 2,0 2,5
Qm³/h
Δp-vP1 W
6m7m 5m 4m 3m
2m
1m0,5m
max.
0 1 2 3 4 5 6 70
50
100
150max.
6m7m 5m 4m 3m
2m
0 2 4 6 8
0 0,5 1,0 1,5 2,0 2,5
0 1 2 3 4 5
0
2
4
6
8
10
0
20
40
60
80
100
0 2 4 6 80
50
100
150
max.
p/kPaPriux master25-65, 32-651~230 V - Rp 1, Rp 1¼
Hm
Δp-cP1 W
m/s
Qm³/h
Ql/s
Qm³/h
max.
max.
6m7m8m9m10m 5m 4m3m
2m
1m0,5m
Qm³/h
Δp-vP1 W
0 2 4 6 80
50
100
150 6m7m8m9m10m
5m
3m
1,5m
4m
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5
Rp 1
Rp 1¼
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER
8
0 4 8 12 16
0 1 2 3 4 5
0 1 2 3
0
2
4
6
8
10
12
0
20
40
60
80
100
120
0 4 8 12 160
100
200
300
4
0,5m
max.
Priux master40-801~230 V - DN 40
Δp-vP1 W
p/kPaHm
Δp-cP1 W
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
12m 11m 10m 9m 8m 7m 6m 5m
4m
3m
2m1m
max.
max.
0 4 8 12 160
100
200
30011
m10m 9m 8m 7m 6m 5m
4m
12m
0 2 4 6 8 10 12
0 1 2 3 4
0 0,5 1,0 1,5 2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0 2 4 6 8 10 120 0,5m
100
14
14
200
300
0 0,4 0,8 1,2 1,6 2,0
DN40
DN50
max.
p/kPaPriux master40-60, 50-601~230 V - DN 40 / 50
Hm
Δp-cP1 W
Δp-cP1 W
m/s
Ql/s
Qm³/h
Qm³/h
14 Qm³/h
8m 7m 5m 3m6m 4m
2m
1m
max.
max.
0 2 4 6 8 10 120
100
200
3007m8m 6m 5m 4m
3m
0 5 10 15 20
0 1 2 3 4 5 6
0 0,5 1,0 1,5 2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0 5 10 15 20
max.
Priux master50-701~230 V - DN 50
Δp-vP1 W
p/kPaHm
Δp-cP1 W
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
max.
max.
9m 8m 7m 6m 5m 4m 3m
2m
1m0,5m
0 5 10 15 200
100
200
300
0
100
200
300
9m 8m 7m 6m 5m 4m
3m
1
0 1 2 3 4 5
200
400
Δp-vP1/W
3
3
2
1
H/m
Δp-cP1/W
0 5 10 15 20
0 2 4 6
0
4
8
12
16
0
40
80
120
160
0 5 10 15 200
600
0 5 10 15 200
200
400
600
Priux master40-1101~230 V - DN 40
p/kPa
6 m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
25
25
25
16m
14m 12m 10m 8m 6m 4m
16m 14m 12m 10m 8m 6m 4m
1m
2
2m
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER
9
0 10 20 30 400
400
800
0 10 20 30 40
0 2 4 6 8 10 12
0
4
8
12
16
0
40
80
120
160
0 10 20 30 400
400
800
2
1
3
3
1
2
0 1 2 3 4 5 6
Δp-vP1/W
H/m
Δp-cP1/W
Priux master50-1101~230 V - DN 50
p/kPa
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
16m 14m 12m 10m 8m 6m 4m
16m 14m 10m 8m 6m 4m12m
1m2m
0 5 10 15 20 25
0 2 4 6
0 1 2 3
0
2
4
6
8
10
0
20
40
60
80
4
100
0 5 10 15 20 250
200
40011m 10m 9m 8m 7m 6m 5m 4m
3m
2m1m
max.
Priux master50-801~230 V - DN 50
Δp-vP1 W
p/kPaHm
Δp-cP1 W
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
max.
max.
0 5 10 15 20 250
200
400
600
600
0,5m
11m 10m 9m 8m 7m 6m 5m
4m
0 5 10 15 20 25
0 2 4 6
0 0,5 1,0 1,5 2,0
0
2
4
6
8
0
20
40
60
80
0 5 10 15 20 250
200
400
600
max.
Priux master65-801~230 V - DN 65
p/kPaHm
Δp-cP1 W
0
200
400
600Δp-vP1 W
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
max.
max.
8m9m 7m 6m 5m 4m
3m
2m
0 5 10 15 20 25
0,5m1m
9m 8m 7m 6m 5m 4m
3m
0 10 20 30 400
400
800
0 10 20 30 40
0 2 4 6 8 10 12
0
2
4
6
8
10
0
20
40
60
80
100
0 10 20 30 400
400
800
0 1 2 3
0
Δp-vP1/W
H/m
Δp-cP1/W
Priux master65-901~230 V - DN 65
p/kPa
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
1
2
2
3
1
m/sv
11m 10m 9m 6m 5m 4m 3m
2m1m
8m 7m
11m10m 7m 6m 5m
4m9m 8m
3
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER
10
0 10 20 30 400
400
800
0 0,5 1,0 1,5 2,0 2,5
3
2
1
Δp-vP1/W
H/m
Δp-cP1/W
p/kPa
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
1
3
2
0 10 20 30 40
0 2 4 6 8 10 12
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
70
0 10 20 30 400
400
800
Priux master80-401~230 V - DN 80
1m2m
3m4m6m 5m
6m 5m 4m 3m
1
3
2
2
3
1
0 1 2 3 4
0 10 20 30 4 50
50
50
50
0 10 20 30 40
0 4 8 12
0
4
8
12
16
0
40
80
120
160
00
400
800
Δp-vP1/W
H/m
Δp-cP1/W
Wilo-Yonos MAXO65/0,5-161~230 V - DN 65
Priux master65-1101~230 V - DN 65
p/kPa
m/s
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
16m 14m 12m 10m 8m 6m
4m
1m2m
0 10 20 30 400
400
800
1200
1200
16m 14m 10m 8m 6m
4m
12m
0
20
40
60
80
100
120
0 0,5 1,0 1,5 2,0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5
DN 100
DN 80
p/kPaH/m
0
2
4
6
8
10
12
Δp-cP1/W
0
500
1000
1500
0
500
1000
1500Δp-v
m/s
P1/W
1
2
3
1
2
3
Q/m³/h0 10 20 30 40 50 60
Q/m³/h0 10 20 30 40 50 60
Q/m³/h0 10 20 30 40 50 60
0 4 8 12 16 Q/l/s
6m8m10m
1m
12m
4m
2m
12m 10m 8m 6m
4m
Priux master 80-90Priux master 100-901~230 V - DN 80/100
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER
11
max.
max.
max.
0
100
200
300
0 42 6 8 10 12
0 42 6 8 10 12
0 42 6 8 10 12
0 1 2 3
0 1 2 3 4
0
2
4
6
8
0
20
40
60
80
0
100
200
300
8m9m 7m 6m 5m 4m
8m9m 7m 6m 5m 4m
3m
2m
1m0,5m
Priux master D32-901~230 V - DN 32
Δp-vP1 W
p/kPaHm
Δp-cP1 W
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
0 4 8 12 16
0 1 2 3 4 5
0 1 2 3
0
2
4
6
8
10
12
0
20
40
60
80
100
120
4
0
200
400
max.
max.
max.
0
200
400
8m9m10m11m12m 7m 6m 5m 4m
3m
2m1m0,5m
Priux master D40-801~230 V - DN 40
p/kPaHm
Δp-vP1 W
Δp-cP1 W
m/s
Ql/s
Qm³/h
0 4 8 12 16 Qm³/h
0 4 8 12 16 Qm³/h
8m9m10m11m12m 7m 6m 5m 4m
0 1 2 3 4 5 6
0 1 2 3 4 5 6
0 1 2 3 4 5 6
0 0,4 0,8 1,2 1,6
0 0,4 0,8 1,2 1,6 2,0
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
70
0
50
100
150
0
50
100
150
max.
Priux master D32-551~230V - DN 32
max.
max.
6m7m 5m 4m 3m
2m1m
0,5m
6m7m 5m 4m 3m
2m
Δp-vP1 W
Hm
Δp-cP1 W
p/kPa
m/s
Ql/s
Qm³/h
Qm³/h
Qm³/h
0 84 12
0 21 3 4
0 0,5 1,0 1,5 2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0
100
200
300
max.
max.
max.
0
100
200
300
Priux master D40-601~230 V - DN 40
p/kPaHm
Δp-vP1 W
Δp-cP1 W
m/s
Ql/s
Qm³/h
0 84 12 Qm³/h
0 84 12 Qm³/h
8m 7m 6m 5m 4m
3m
2m1m
0,5m
8m 7m 6m 5m 4m 3m
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER-D
12
0 4 8 12 16 20
0 1 2 3 4 5 6
0 0,5 1,0 1,5 2,0 2,5 3,0
0
2
4
6
8
0
20
40
60
80
0
200
400max.
max.
0
200
400
8m9m 7m 6m 5m 4m 3m
2m
1m0,5m
8m9m 7m 6m 5m 4m 3m
max.
Priux master D50-701~230 V - DN 50
p/kPaHm
Δp-vP1 W
Δp-cP1 W
m/s
Qm³/h
0 4 8 12 16 20 Qm³/h
0 4 8 12 16 20 Qm³/h
Ql/s
0 10 20 30
0 2 4 6 8
0
4
8
12
16
0
40
80
120
160
0 10 20 300
400
1010
5
800
0 10 20 30
0 1 2 3 4
0
4
8
12
16
0
40
80
120
160
0 10
1
3
2
3
1
Δp-vP1W
Hm
Δp-cP1W
p/kPa
Ql/s
Qm³/h
Qm³/h
Qm³/h
m/s
Priux Master-D50-1101~230V - DN 50
0 10 20 300
400
800
2
4m6m16m
14m12m 10m 8m
16m 14m 12m 10m 8m 6m 4m
1m
2m
0 5 10 15 200
200
400
0 5 10 15 20
0 2 4 6
0
4
8
12
16
0
40
80
120
160
0 5 10 15 200
200
400
0 1 2 3 4 5
3
2
1
6
Δp-vP1/W
H/m
Δp-cP1/W
p/kPa
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
m/s
25
25
25
1
3
216m 14m 12m 10m 8m 6m 4m
1m
Priux master-D40-1101~230V - DN 40
2m
16m
14m 12m 10m 8m 6m 4m
0
2
4
6
8
10
0
20
40
60
80
100
0
200
400
600
0
200
400
600
max.
max.
max.
Priux master D50-801~230 V - DN 50
p/kPaHm
Δp-vP1 W
Δp-cP1 W
0 0,5 1,0 1,5 2,0 2,5 3,0 m/s
0 4 8 12 16 20
0 1 2 3 4 5 6
Qm³/h
0 4 8 12 16 20 Qm³/h
0 4 8 12 16 20 Qm³/h
Ql/s
7m8m9m10m11m 6m 5m 4m
3m2m
1m0,5m
8m9m10m11m 7m 6m 5m 4m
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER-D
13
1
3
2
2
3
1
0 1 2 3 4
50
50
50
Δp-vP1/W
H/m
Δp-cP1/W
p/kPa
Q/l/s
Q/m³/h
Q/m³/h
Q/m³/h
m/s
0 10 20 30 40
0 4 8 12
0
4
8
12
16
0
40
80
120
160
0 10 20 30 400
400
800
0 10 20 30 400
400
800
1200
1200
Priux master-D65-1101~230V - DN 65
16m 14m 12m 10m 8m 6m 4m
1m2m
4m6m16
m14m 10m 8m12m
3
2
1
0 10 20 30 40
0 2 4 6 8 10 12
0
2
4
6
8
10
0
20
40
60
80
100
0 10 20 30 40
0 10 20 30 40
0
400
800
0
0 1 2 3
2
1
v
400
800
Δp-vP1/W
H/m
Δp-cP1/W
p/kPa
Q/l/s
Q/m³/h
m/s
Q/m³/h
Q/m³/h
Prix master-D65-901~230V - DN 65
11m 10m 9m 8m 7m 6m 5m 4m 3m
2m1m
11m 4m10m 9m 8m 7m
3
6m 5m
2
1
3
1
3
2
0 1 2 3
0
20
40
60
80
100
120
0
500
1000
1500
0
2
4
6
8
10
12
H/m
Δp-cP1/W
0
500
1000
1500Δp-vP1/W
12m 11m10m 9m
4m3m
2m1m
8m 7m 6m 5m
12m 11m
3,5m
10m
p/kPa
0 4 8 12 16 Q/l/s
m/s
0 10 20 30 40 50 60 Q/m³/h
0 10 20 30 40 50 60 Q/m³/h
0 10 20 30 40 50 60 Q/m³/h
Priux master-D80-901~230V - DN 80
9m 8m 7m 6m 5m
PRIUX MASTER
HYDRAULIC PERFORMANCES - PRIUX MASTER-D
14
Puissance Vitesse Puissanceabsorbée
Intensité à1~230V
Intensité à3~230V
Protection moteur Presse-étoupe
P2 [W] n [1/min] P1 [W] I [A]
25-55 90 1000-3700 5-120 0,08-0,9 0,08-0,9 intégré 2xM20
25-65 140 1000-4400 5-190 0,08-1,3 0,08-1,3 intégré 2xM20
25-90 200 1000-4800 10-305 0,15-1,33 0,15-1,33 intégré 2xM20
32-55 90 1000-3700 5-120 0,08-0,9 0,08-0,9 intégré 2xM20
32-65 140 1000-4400 5-190 0,08-1,3 0,08-1,3 intégré 2xM20
32-90 200 1000-4800 10-305 0,15-1,33 0,15-1,33 intégré 2xM20
40-30 90 1200-3700 7-120 0,09-0,9 0,09-0,9 intégré 2xM20
40-60 200 1200-4800 10-305 0,15-1,33 0,15-1,33 intégré 2xM20
40-80 350 950-4500 15-450 0,17-2,0 0,17-2,0 intégré 2xM20
40-110 600 800-3500 25-710 0,25-3,15 0,25-3,15 intégré 2xM20
50-60 200 1200-4800 10-305 0,15-1,33 0,15-1,33 intégré 2xM20
50-70 350 950-4000 15-430 0,17-1,88 0,17-1,88 intégré 2xM20
50-80 500 950-4400 15-600 0,17-2,65 0,17-2,65 intégré 2xM20
50-110 1050 800-3300 40-1250 0,30-5,50 0,30-5,50 intégré 2xM20
65-80 500 950-4000 15-600 0,17-2,65 0,17-2,65 intégré 2xM20
65-90 650 800-2800 40-800 0,30-3,50 0,30-3,50 intégré 2xM20
65-110 1200 800-3400 40-1450 0,30-6,40 0,30-6,40 intégré 2xM20
80-40 650 900-2400 40-800 0,30-3,50 0,30-3,50 intégré 2xM20
80-90 1300 930-300 40-1550 0,30-6,80 0,30-6,80 intégré 2xM20
100-90 1300 930-300 40-1550 0,30-6,80 0,30-6,80 intégré 2xM20
Puissance Vitesse Puissanceabsorbée
Intensité à1~230V
Intensité à3~230V
Protection moteur Presse-étoupe
P2 [W] n [1/min] P1 [W] I [A]
32-55 90 1000-3700 5-120 0,08-0,9 0,08-0,9 intégré 2xM20
32-90 200 1000-4800 10-305 0,15-1,33 0,15-1,33 intégré 2xM20
40-60 200 1200-4800 10-305 0,15-1,33 0,15-1,33 intégré 2xM20
40-80 350 950-4500 15-450 0,17-2,00 0,17-2,00 intégré 2xM20
40-100 600 800-3500 25-710 0,25-3,15 0,25-3,15 intégré 2xM20
50-70 350 950-4000 15-430 0,17-1,88 0,17-1,88 intégré 2xM20
50-80 500 950-4400 15-600 0,17-2,65 0,17-2,65 intégré 2xM20
50-110 1050 800-3300 40-1250 0,30-5,50 0,30-5,50 intégré 2xM20
65-90 650 800-2800 40-800 0,30-3,50 0,30-3,50 intégré 2xM20
65-110 1200 800-3400 40-1450 0,30-6,40 0,30-6,40 intégré 2xM20
80-90 1300 930-300 40-1550 0,30-6,80 0,30-6,80 intégré 2xM20
PRIUX MASTER
MOTOR DATA - PRIUX MASTER
MOTOR DATA - PRIUX MASTER - D
Ratedpower Speed Power
consumption Current at
1~230V Current at
3~230V Motor
protection Pg thread
connection
P2 [W] n [1/min] P1 [W] I [A]
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
Ratedpower Speed Power
consumption Current at
1~230V Current at
3~230V Motor
protection Pg thread
connection
P2 [W] n [1/min] P1 [W] I [A]
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
integrated
15
Diamètre Nominal Raccor dement tube Filetage a1 a2 b4 b5 l0 l1 l3 l4 Poids PlanDN Rp G mm mm mm mm mm mm mm mm kg -
25-55 — 1 1 1/2 183 44 51 51 180 90 113 90 4,5 A
25-65 — 1 1 1/2 183 44 51 51 180 90 113 90 4,5 A
25-90 — 1 1 1/2 248 47 64 64 180 90 135 98 5,3 A
32-55 — 1 1/4 2 183 44 51 51 180 90 113 90 4,6 A
32-65 — 1 1/4 2 183 44 51 51 180 90 113 90 4,6 A
32-90 — 1 1/4 2 248 47 64 64 180 90 135 98 5,4 A
40-30 40 — — 178 57 51 51 220 110 113 90 8,6 B
40-60 40 — — 253 48 64 64 220 110 135 98 9,2 B
40-80 40 — — 318 64 71 71 250 125 152 109 13 B
40-110 40 — — 323 62 87 87 250 125 160 169 21 B
50-60 50 — — 356 46 64 64 240 120 135 98 10,5 B
50-70 50 — — 321 53 71 71 280 140 152 109 14,2 B
50-80 50 — — 321 53 71 71 280 140 152 109 14,2 B
50-110 50 — — 325 66 87 87 340 170 160 169 25 B
65-80 65 — — 330 57 71 71 280 140 152 109 16,1 B
65-90 65 — — 337 70 87 87 340 170 160 169 25,8 B
65-110 65 — — 332 66 87 87 340 170 160 169 27,5 B
80-40 80 — — 333 84 87 87 360 180 160 169 29 B
80-90 80 — — 333 84 87 87 360 180 160 169 30,4 B
100-90 100 — — 345 85 87 87 360 180 160 169 33,4 B
Gb4 b5
l 4l 3
I 0l 1
a1a2
b4 b5
l 4l 3
I 0I 1
a1a2
R1/8"
PRIUX MASTER
DIMENSIONS - PRIUX MASTER
Nominal Diameter Pipe diameter Threaded a1 a2 b4 b5 l0 l1 l3 l4 Weight DrawingDN Rp G mm mm mm mm mm mm mm mm kg -
Drawing A Drawing B
16
Ø D
n x Ø d
Ø k
DN
L2Ø k Ø d
L1
1
n x Ø d 2
f 2f 1
n x Ø dL
Ø D Ø k Ø d DN
f 1f 2
PRIUX MASTER
FLANGES - PRIUX MASTERDrawing C Drawing D
Flange Nominaldia. Pump flange dimensions Drawing
- DN D d KL1/KL2 Dia. k n x d1/d2 n x dL f1 f2 -
[-] [-] [mm] [pcs. x mm] [mm] [-]
40-30 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - 65 65 C
40-60 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - 65 65 C
40-80 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - 65 65 C
40-110 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - 65 65 C
50-60 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - 70 70 C
50-70 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - 70 70 C
50-80 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - 70 70 C
50-110 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - 70 70 C
65-80 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 65 185 118 130/145 – 4 x 14 / 19 - 80 80 C
65-90 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 65 185 118 130/145 – 4 x 14 / 19 - 80 80 C
65-110 Combination flange PN6/10 (flange PN 16 according to EN 1092-2) 65 185 118 130/145 – 4 x 14 / 19 - 80 80 C
80-40 Flange PN10 (flange PN 16 according to EN 1092-2) 80 200 132 – 160 – 8 x 19 90 90 D
80-90 Flange PN10 (flange PN 16 according to EN 1092-2) 80 200 132 – 160 – 8 x 19 90 90 D
100-90 Flange PN10 (flange PN 16 according to EN 1092-2) 100 220 156 – 180 – 8 x 19 100 100 D
17
b4 b2
b1 b5DN
l 4l 3
I 0l 1
a1a2R1/8"
Diamètre Nominal Raccor dement tube Filetage a1 a2 b1 b2 b4 b5 l0 l1 l3 l4 Poids DN — — mm mm mm mm mm mm mm mm mm mm kg
32-55 32 — — 183 47 112 106 109 109 220 110 113 90 10,4
32-90 32 — — 267 57 112 105 119 139 220 110 135 98 17,1
40-60 40 — — 269 64 125 138 124 144 220 110 135 98 17,5
40-80 40 — — 329 62 151 144 151 151 250 125 152 109 24,0
40-110 40 — — 323 65 192 192 197 197 250 125 160 169 42,8
50-70 50 — — 333 62 159 148 151 151 280 140 152 109 26,4
50-80 50 — — 333 62 159 148 151 151 280 140 152 109 26,0
50-110 50 — — 318 70 201 192 197 197 340 170 160 169 47,2
65-90 65 — — 337 88 209 196 197 197 340 170 160 169 50,7
65-110 65 — — 323 80 209 196 197 197 340 170 160 169 50,2
80-90 80 — — 342 100 235 221 212 212 360 180 160 169 56,6
PRIUX MASTER
Nominal Diameter Pipe diameter Threaded a1 a2 b1 b2 b4 b5 l0 l1 l3 l4 Weight
DIMENSIONS - PRIUX MASTER - D
18
Ø D
n x Ø d
Ø k
DN
L2Ø k Ø d
L1
1
n x Ø d 2
Ø D Ø k Ø d DN
n x Ø dL
Ø D
n x Ø d
Ø k
DN
L2Ø k Ø d
L1
1
n x Ø d 2
f 2f 1
PRIUX MASTER
FLANGES - PRIUX MASTER - D
Flange Nominaldia. Pump flange dimensions Dimension
drawing
- DN D d KL1/KL2 Dia. k n x d1/d2 n x dL f1 f2 -
[-] [-] [mm] [pcs. x mm] [mm] [-]
32-55Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 32 140 76 90/100 – 4 x 14 / 19 - — — E
32-90Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 32 140 76 90/100 – 4 x 14 / 19 - — — E
40-60Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - — — E
40-80Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - — — E
40-110Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 40 150 84 100/110 – 4 x 14 / 19 - 65 65 F
50-70Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - — — E
50-80Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - — — E
50-110Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 50 165 99 110/125 – 4 x 14 / 19 - 70 70 F
65-90Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 65 185 118 130/145 – 4 x 14 / 19 - — — E
65-110Combination flange PN6/10 (flange PN
16 according to EN 1092-2) 65 185 118 130/145 – 4 x 14 / 19 - 80 80 F
80-90Flange PN 10
(flange PN 16 according to EN 1092-2) 80 200 132 – 160 – 8x19 — — G
Drawing E Drawing F Drawing G
19
• Priux masterPression minimale à l’aspiration [m] pour éviter la cavitation pour température de fluide
25-5
5
25-6
5
25-9
0
32-5
5
32-6
5
32-9
0
40-3
0
40-6
0
40-8
0
40-1
10
50-6
0
50-7
0
50-8
0
50-1
10
65-8
0
65-9
0
65-1
10
80-4
0
80-9
0
100-
90
50°C 3 3 3 3 3 3 5 5 5 7 5 5 5 7 5 7 7 7 7 7
95°C 10 10 10 10 10 10 12 12 12 15 12 12 12 15 12 15 15 15 15 15
110°C 16 16 16 16 16 16 18 18 18 23 18 18 18 23 18 23 23 23 23 23
• Priux master - DPression minimale à l’aspiration [m] pour éviter la cavitation pour température de fluide
32-5
5
32-9
0
40-6
0
40-8
0
40-1
10
50-7
0
50-8
0
50-1
10
65-9
0
65-1
10
80-9
0
50°C 3 3 5 5 7 5 5 7 7 7 7
95°C 10 10 12 12 15 12 12 15 15 15 15
110°C 16 16 18 18 23 18 18 23 23 23 23
PRIUX MASTER
FEATURES
a) PackagingThreaded models: supplied with gaskets wit-hout unions.Flanged models: supplied with flange seals and bolts, without counterflanges (optional).
b) MaintenanceReplacing of motor unit.
• Unions and PN 10/16 weldable round counterflanges
• Insulation shell (heating application) • Adaptation fittings. • Isolation valves• Kit press 6.• MGP / YN 1200 control box.
RECOMMENDED ACCESSORIES
MIN. SUCTION LOAD• Priux masterMinimum suction head at suction port [m] for preventing cavitation at water pumping temperature
• Priux master - DMinimum suction head at suction port [m] for preventing cavitation at water pumping temperature
20