operating and installation instructions ... - miele.co.nz€¦ · available from miele, by a miele...

Operating and installation instructionsCeramic cooktops with induction

To prevent the risk of accidents or damage to the appliance, it isessential to read these instructions before it is installed and used forthe first time.

en-AU, NZ M.-Nr. 10 032 900

Contents

2

Warning and Safety instructions .......................................................................... 4

Caring for the environment ................................................................................ 14

Overview............................................................................................................... 15Cooktop................................................................................................................. 15

KM 6328-1........................................................................................................ 15KM 6366-1 / KM 6367-1 .................................................................................. 16

Controls / Indicators.............................................................................................. 17Cooking zone data ................................................................................................ 19

Before using for the first time ............................................................................ 21Cleaning the cooktop for the first time.................................................................. 21Switching on the cooktop for the first time ........................................................... 21

Induction .............................................................................................................. 22The induction principle .......................................................................................... 22Noises.................................................................................................................... 23Pans....................................................................................................................... 24

Tips on saving energy ........................................................................................ 25

Power level range ................................................................................................ 26

Operation.............................................................................................................. 27Operating principles .............................................................................................. 27Switching on.......................................................................................................... 28Selecting/Changing the power setting .................................................................. 28Switching off.......................................................................................................... 28Residual heat indicator.......................................................................................... 28PowerFlex cooking area ........................................................................................ 29Auto heat-up ......................................................................................................... 30Booster .................................................................................................................. 31Keeping warm ....................................................................................................... 33

Timer..................................................................................................................... 34Minute minder ....................................................................................................... 34Switching a cooking zone off automatically.......................................................... 34Using both timer functions at the same time ........................................................ 35

Additional functions ............................................................................................ 36Stop & Go.............................................................................................................. 36Recall..................................................................................................................... 36

Safety features..................................................................................................... 37System lock........................................................................................................... 37

Contents

3

Safety switch-off ................................................................................................... 38Overheating protection.......................................................................................... 39

Cleaning and care ............................................................................................... 40

Problem solving guide ........................................................................................ 42

Optional accessories .......................................................................................... 45

Con@ctivity.......................................................................................................... 46

Safety instructions for installation ..................................................................... 48

Safety distances .................................................................................................. 49

Cooktops with frame or bevelled edge ............................................................. 51Installation notes ................................................................................................... 51Building-in dimensions.......................................................................................... 52

KM 6328-1........................................................................................................ 52KM 6366-1........................................................................................................ 53

Installation ............................................................................................................. 54

Flush-fitted cooktops.......................................................................................... 55Installation notes ................................................................................................... 55Building-in dimensions.......................................................................................... 56

KM 6367-1........................................................................................................ 56Installation ............................................................................................................. 57

Electrical connection .......................................................................................... 59

Service.................................................................................................................. 61Contact in case of fault ......................................................................................... 61Data plate: ............................................................................................................. 61Warranty ................................................................................................................ 61

Warning and Safety instructions

4

This appliance conforms to current safety requirements.Inappropriate use can, however, lead to personal injury anddamage to property.

To avoid the risk of accidents and damage to the appliance,please read these instructions carefully before using it for the firsttime. They contain important notes on installation, safety, use andmaintenance.Miele cannot be held liable for non-compliance with theseinstructions.

Keep these instructions in a safe place and ensure that new usersare familiar with the contents. Pass them on to any future owner.


5

Correct application

This cooktop is designed for domestic use and for use in similarenvironments by guests in hotel or motel rooms, bed & breakfastsand other typical living quarters. This does not include common/shared facilities or commercial facilities within hotels, motels or bed& breakfasts.

This cooktop is not suitable for outdoor use.

It is intended only to cook food and keep it warm. Any other use isnot supported by Miele and could be dangerous.

This appliance is not intended for use by persons (includingchildren) with reduced physical, sensory or mental capabilities, orlack of experience and knowledge, unless they have been givensupervision or instruction concerning its use by a person responsiblefor their safety, and are able to recognise the dangers of misuse.


6

Safety with children

Young children must not be allowed to use this appliance.

Older children may only use the appliance when its operation hasbeen clearly explained to them and they are able to use it safely,recognising the dangers of misuse.

Cleaning may only be carried out by older children under thesupervision of an adult.

Please supervise children in the vicinity of the cooktop and do notlet them play with it.

The cooktop gets hot when in use and remains hot for a whileafter being switched off. Keep children well away from the cooktopuntil it has cooled down and there is no danger of burning.

Danger of burning!Do not store anything which might arouse a child's interest instorage areas above or next to the cooktop. Otherwise they could betempted into climbing onto the appliance.

Danger of burning or scalding!Place pots and pans on the cooking zone in such a way that childrencannot pull them down and burn themselves.

Danger of suffocation! Children may be able to wrap themselves inpacking material or pull it over their head with the risk of suffocation.Keep children away from any packing material.

Activate the system lock to ensure that children cannot switch onthe cooktop inadvertently.


7

Technical safety

Repairs and other work by unqualified persons could bedangerous. Installation, maintenance work and repairs to electricalappliances must only be carried out by a Miele approved servicetechnician.

A damaged appliance is dangerous. Check it for any visibledamage. Never install or attempt to use a damaged appliance.

Reliable and safe operation of this cooktop can only be assured ifit has been connected to the mains electricity supply.

The electrical safety of this appliance can only be guaranteedwhen continuity is complete between it and an effective earthingsystem which complies with local and national safety regulations. Itis most important that this basic safety requirement is present andtested regularly and, where there is any doubt, the household wiringsystem should be inspected by a qualified electrician.

Before connecting the appliance to the mains supply, ensure thatthe connection data on the data plate (voltage and frequency)matches the mains electricity supply. This data must correspond inorder to avoid the risk of damage to the appliance.

Do not connect the cooktop to the mains electrical supply by amulti-socket adapter or extension lead. These are a fire hazard anddo not guarantee the required safety of the appliance.

For safety reasons, this cooktop may only be used after it hasbeen built in.

This appliance must not be installed and operated in mobileinstallations (e.g. on a ship).

Never open the casing of the cooktop.Touching or tampering with electrical connections or componentsand mechanical parts is highly dangerous to the user and can causeoperational faults.


8

The manufacturer's warranty will be invalidated if the appliance isnot repaired by a Miele approved service technician.

Faulty components must only be replaced by genuine Miele spareparts. The manufacturer can only guarantee the safety of theappliance when Miele replacement parts are used.

The cooktop is not intended for use with an external timer switchor a remote control system.

The cooktop must be connected to the electricity supply by aqualified electrician (see "Electrical connection").

If the mains connection cable is damaged, it must be replacedwith a special connection cable type H 05 VV-F (PVC insulated),available from Miele, by a Miele approved service technician orsuitably qualified electrician in order to avoid a hazard. See"Electrical connection".

During installation, maintenance and repair work, the appliancemust be disconnected from the mains electricity supply. It is onlycompletely isolated from the electricity supply when:

– the mains circuit breaker is switched off, or

– it is switched off at the wall socket and the plug is withdrawn fromthe socket. Do not pull the mains connection cable but the mainsplug to disconnect your appliance from the mains electricitysupply.

Danger of electric shock!Do not use the cooktop if it is faulty, or if the ceramic surface iscracked, chipped or damaged in any way. Switch it off immediately,disconnect it from the mains electricity supply and contact Miele.


9

If the cooktop is installed behind a furniture panel (e.g. a door),ensure that the door is never closed whilst the cooktop is in use.Heat and moisture can build up behind a closed furniture panel andcause subsequent damage to the cooktop, the housing unit and thefloor. Do not close the door until the residual heat indicators havegone out.

In areas which may be subject to infestation by cockroaches orother vermin, pay particular attention to keeping the appliance andits surroundings clean at all times. Any damage caused bycockroaches or other vermin will not be covered by the warranty.

DO NOT MODIFY THIS APPLIANCE.


10

Correct use

The cooktop gets hot when in use and remains hot for a whileafter being switched off. There is a danger of burning until theresidual heat indicators go out.

Oil and fat can overheat and catch fire. Do not leave the cooktopunattended when cooking with oil and fat. If it does ignite, do notattempt to put the flames out with water.Switch off the cooktop and use a suitable fire blanket, saucepan lid,damp towel or similar to smother the flames.

Flames could set the grease filters of a rangehood on fire. Do notflambé under a rangehood.

Spray canisters, aerosols and other inflammable substances canignite when heated. Therefore do not store such items or substancesin a drawer under the cooktop. Cutlery inserts must be heat-resistant.

Do not heat an empty pan.

Do not heat up food in closed containers e.g. tins or sealed jarson the cooktop, as pressure can build up in the containers, causingthem to explode.

Do not cover the cooktop, e.g. with a cooktop cover, a cloth orprotective foil. The material could catch fire, shatter or melt if thecooktop is switched on by mistake or if residual heat is still present.

When the appliance is switched on either deliberately or bymistake, or when there is residual heat present, there is the risk ofany metal items left on the cooktop heating up, with the danger ofburning. Depending on the material, other items left on the cooktopcould also melt or catch fire. Damp pan lids might adhere to theceramic surface and be difficult to dislodge. Do not use theappliance as a resting place. Switch the cooking zones off after useand do not rely on the pan detector.


11

You could burn yourself on the hot cooktop. Protect your handswith heat-resistant pot holders or gloves when handling hot pots andpans. Do not let them get wet or damp, as this causes heat totransfer through the material more quickly with the risk of scalding orburning yourself.

When using an electrical appliance, e.g. a hand-held food mixer,near the cooktop, ensure that the cable of the electrical appliancecannot come into contact with the hot cooktop. The insulation on thecable could become damaged.

Grains of salt, sugar and sand (e.g. from cleaning vegetables) cancause scratches if they get under pan bases. Make sure that theceramic surface is clean before placing pans on it.

Even a light object can cause damage in certain circumstances.Do not drop anything on the ceramic surface.

Placing hot pans on the sensors and indicators could damage theelectronics underneath. Do not place hot pans on the sensors orindicators.

Do not allow solid or liquid sugar, or pieces of plastic or aluminiumfoil to get onto the cooking zones when they are hot, as they candamage the ceramic surface when it cools down. If this shouldoccur, switch off the appliance and scrape off all the sugar, plastic oraluminium residues whilst still hot, using a shielded scraper blade.Wear oven gloves. Allow the cooking zones to cool down and cleanthem with a suitable ceramic cooktop cleaning agent.

Pans which boil dry can cause damage to the ceramic glass. Donot leave the cooktop unattended whilst it is being used.

Only use pots and pans with smooth bases. Rough bases willscratch the ceramic glass.

Lift pans into position on the cooktop. Sliding them into place cancause scuffs and scratches.


12

Induction heating works extremely quickly. Therefore, the base ofthe pan could heat up to the temperature at which oil or fat self-ignites within a very short time. Do not leave the cooktop unattendedwhilst it is being used.

Heat oil or fat for a maximum of one minute. Do not use theBooster function to heat oil or fat.

For people fitted with a heart pacemaker: Please note that thearea immediately surrounding the cooktop is electromagneticallycharged. It is very unlikely to affect a pacemaker. However, if in anydoubt, consult the manufacturer of the pacemaker or your doctor.

To prevent damage to items which are susceptible toelectromagnetic fields, e.g. credit cards, digital storage devices,pocket calculators, etc., do not leave them in the immediate vicinityof the cooktop.

Metal utensils stored in a drawer under the cooktop can becomehot if the appliance is used intensively for a long time. Do not storeany metal items or utensils in a drawer under the cooktop.

This cooktop is fitted with a cooling fan. If a drawer is fitteddirectly underneath the cooktop, ensure that there is sufficient spacebetween the drawer and its contents and the underside of theappliance in order to ensure sufficient ventilation of the cooktop. Donot store pointed or small items or paper in the drawer. They couldget in through the ventilation slots or be sucked into the housing bythe fan and damage the fan or impair cooling.

Do not use two pans on a cooking zone, extended zone orPowerFlex zone at the same time.

If the pan only partially covers the cooking zone, the handle couldbecome very hot.Ensure that you always place the pan in the middle of the cookingzone.


13

Cleaning and care

Do not use a steam cleaning appliance to clean this appliance.The steam could reach the electrical components and cause a shortcircuit.

If the cooktop is built in over a pyrolytic oven, the cooktop shouldnot be used whilst the pyrolytic process is being carried out, as thiscould trigger the overheating protection mechanism on the cooktop(see relevant section).

Caring for the environment

14

Disposal of the packingmaterialThe transport and protective packaginghas been selected from materials whichare environmentally friendly fordisposal, and can normally be recycled.

Recycling the packaging reduces theuse of raw materials in themanufacturing process and alsoreduces the amount of waste in landfillsites. Ensure that any plasticwrappings, bags etc. are disposed ofsafely and kept out of the reach ofbabies and young children. Danger ofsuffocation.

Disposing of your oldapplianceElectrical and electronic appliancesoften contain valuable materials. Theyalso contain specific materials,compounds and components, whichwere essential for their correct functionand safety. These could be hazardousto human health and to the environmentif disposed of with your domestic wasteor if handled incorrectly. Please do not,therefore, dispose of your old appliancewith your household waste.

Please dispose of it at your localcommunity waste collection / recyclingcentre for electrical and electronicappliances. You are also responsible fordeleting any personal data that may bestored on the appliance prior todisposal. Please ensure that your oldappliance poses no risk to childrenwhile being stored prior to disposal.

Overview

15

Cooktop

KM 6328-1

�

�

888800

� �

�

a PowerFlex cooking zone with TwinBooster

b PowerFlex cooking zone with TwinBooster

ab can be combined to form PowerFlex cooking area

c PowerFlex cooking zone with TwinBooster

d PowerFlex cooking zone with TwinBooster

cd can be combined to form PowerFlex cooking area

e Controls / Indicators

Overview

16

KM 6366-1 / KM 6367-1

a PowerFlex cooking zone with TwinBooster

b PowerFlex cooking zone with TwinBooster

ab can be combined to form PowerFlex cooking area

c PowerFlex cooking zone with TwinBooster

cf can be combined to form PowerFlex cooking area

d PowerFlex cooking zone with TwinBooster

de can be combined to form PowerFlex cooking area

e PowerFlex cooking zone with TwinBooster

f PowerFlex cooking zone with TwinBooster

g Controls / Indicators

Overview

17

Controls / Indicators

88 00

��

�

min

�

� � �

�

�

�

Sensor controls

a For switching the cooktop on/off

b For activating/deactivating Stop & Go

ab For activating/deactivating the system lock

c TimerSwitching on and off- For switching between timer functions- For selecting a cooking zone (see "Switching a cooking zone offautomatically")

d For setting a minute minder / switch-off time

e For switching the keeping warm function on and off

Overview

18

f For selecting the power setting

g For switching the PowerFlex cooking area on/off

Indicator lights

h The system lock has been activated

k Timer

i Cooking zone display

Cooking zone ready for use Keeping warm setting to Power level TwinBooster level 1 Booster / TwinBooster level 2 No pan on cooking zone or pan unsuitable (see "Induction") Residual heat Auto heat-up Automatic switch-off programmed

Timer display

j Duration in minutes

l Minute minder

System lock activated

Symbols

m Cooking zone selection (depending on model)

Overview

19

Cooking zone data

Cooking zone KM 6328-1

Ø in cm* Rating in watts for 230 V**

15–23 NormalTwinBooster, level 1TwinBooster, level 2

210030003650


210030003650


210030003650


210030003650

+ +

22–23 /15 x 23 – 23 x 39

NormalTwinBooster, level 1TwinBooster, level 2

340048007300

Total 7300

* Cookware of any diameter may be used within the specified range.** The wattage quoted may vary depending on the size and material of the pans used.

Overview

20

Cooking zone KM 6366-1 7 KM 6367-1

Ø in cm* Rating in watts for 230 V**


210030003650


210030003650


210033003650


210033003650


210030003650


210030003650

+ 22–23 /15 x 23 – 23 x 39

NormalBooster

34003650

+ +

22–23 /15 x 23 – 23 x 39

NormalTwinBooster, level 1TwinBooster, level 2

340048007300

Total 11000

* Cookware of any diameter may be used within the specified range.** The wattage quoted may vary depending on the size and material of the pans used.

Before using for the first time

21

Please stick the extra data plate forthe appliance supplied with thisdocumentation in the space providedin the "Service" section of thisbooklet. Alternatively, the additionallabel can be stuck near the applianceif the appliance markings are notvisible after installation.

Remove any protective wrapping andstickers.

Cleaning the cooktop for thefirst time Before using for the first time, clean

the cooktop with a damp cloth onlyand then wipe dry.

Switching on the cooktop forthe first timeThe metal components have aprotective coating which may give off aslight smell when heated up for the firsttime. The induction coils may also giveoff a slight smell for the first few hoursof operation. This smell will be lessnoticeable with each subsequent usebefore dissipating completely.

The smell and any vapours given off donot indicate a faulty connection orappliance and they are not hazardousto health.

Please note that the heating up timeon induction cooktops is very muchshorter than on conventionalcooktops.

Induction

22

The induction principleAn induction coil is located under eachcooking zone. When a cooking zone isswitched on, this coil creates amagnetic field which impacts directlyon the base of the pan and heats it up.The cooking zone itself is heated upindirectly by the heat given off by thepan.

An induction cooking zone only workswhen a ferromagnetic pan is placed onit (see "Pans"). The induction cookingzone automatically recognises the sizeof the pan.

The symbol flashes alternately withthe power setting selected in one of thecooking zones

– if it is switched on without a pan inplace, or if the pan is unsuitable (non-magnetic base),

– if the diameter of the base of the panis too small,

– if the pan is taken off the cookingzone when it is switched on.

If a suitable pan is placed on thecooking zone within 3 minutes, will goout and you can continue as normal.

If no pan or an unsuitable pan is placedon the cooking zone, the cooking zonewill switch off automatically after 3minutes.

When the appliance is switchedon either deliberately or by mistake,or when there is residual heatpresent, there is the risk of any metalitems placed on the cooktop (e.g.cutlery) heating up.Danger of burning!Do not use the cooktop as a restingplace for items. Switch the cookingzones off after use with theappropriate sensor and do not relyon the pan detector.

Induction

23

NoisesWhen using an induction cooking zone,the following noises can occur in thepan, depending on what it is made ofand how it has been constructed.

On the higher power settings, it mightbuzz. This will decrease or ceasealtogether when the power setting isreduced.

If the pan base is made of layers ofdifferent materials (e.g. in a sandwichedbase), it might emit a cracking sound.

Whistling might occur if linked zones(see "Booster") are being used at thesame time, and the pans also havebases made of layers of differentmaterials.

You might hear a clicking sound fromthe electronic switches, especially onlower power settings.

You might hear a whirring sound whenthe cooling fan switches on. It switcheson to protect the electronics when thecooktop is being used intensively. Thefan may continue to run after theappliance has been switched off.

Induction

24

PansSuitable pans:

– Stainless steel pans with a base thatcan be magnetised.

– Enamelled steel pans.

– Cast iron pans.

Unsuitable pans:

– Stainless steel pans without amagnetic base.

– Aluminium and copper pans.

– Glass, ceramic or earthenware potsand pans.

To test whether a pot or pan is suitablefor use on an induction cooktop, hold amagnet to the base of the pan. If themagnet sticks, the pan is suitable. If anunsuitable pan is used, the symbolwill flash alternately with the powersetting selected.

Please be aware that the properties ofthe pan base can affect the evennesswith which food heats up in the pan.

– To make optimum use of the cookingzones, choose pans with diameterslarger than the innermost markingsbut smaller than the outermostmarkings (see "Cooking zone data").If the diameter of the pan is smallerthan the innermost marking, the panwill not be recognised and will flashalternately with the power settingselected.

– Do not use pots and pans with baseswith pronounced edges or ridges.These could scratch or scour thecooktop surface permanently.

– Lift pans into position on thecooktop. Sliding them into place cancause scuffs and scratches.

– Often the maximum diameter quotedby manufacturers refers to thediameter of the top rim of the pot orpan. The diameter of the base(generally smaller) is more important.

– Where possible, use pans withvertically straight sides. If a pan hasangular sides, induction also acts onthe sides of the pan. The sides of thepan may discolour or the coatingmay peel off.

Tips on saving energy

25

– Use a lid whenever possible tominimise heat loss.

– Select a smaller pan when cookingsmall quantities. A smaller pan usesless energy than a larger pan withvery little in it.

– Cook with as little water as possible.

– Once food has come to the boil orthe oil in the pan is hot enough forfrying, reduce the heat to a lowersetting.

– Use a pressure cooker to reducecooking times.

Power level range

26

Settings

Melting butterDissolving gelatine

1–2

Making milk puddings 2

Warming small quantities of liquidCooking riceDefrosting frozen vegetablesCooking pulses

3

Warming liquid and semi-solid foodsMaking omelettes or lightly frying eggsSteaming fruitCooking pasta

4

Steaming vegetables, defrosting fish and reheating frozen food 5

Bringing large quantities of food to the boil, e.g. casserolesThickening custard and sauces, e.g. hollandaiseGently frying eggs (without overheating the fat)

6

Gentle braising (without overheating the fat) of meat, fish, sausagesFrying pancakes etc.

7

Braising for stews 8

Boiling large quantities of waterBringing to the boil

9

These settings should only be taken as a guide. The power of the induction coils will varydepending on the size and material of the pan. For this reason, it is possible that thesettings will need to be adjusted slightly to suit your pans. As you use the cooktop, you willget to know which settings suit your pans best. When using new pans that you are notfamiliar with, set the power level below the one specified.

Operation

27

Operating principlesThe glass ceramic cooktop is equippedwith electronic sensor controls whichreact to finger contact. For safetyreasons, in order to switch the cooktopon, the On/Off sensor needs to betouched for a little longer than the othersensors. A tone sounds each time a sensor istouched.

Malfunction due to dirty and/orcovered sensors:If the sensors are dirty or covered,this could cause them to fail to react,to activate a function or even toswitch the cooktop off automatically(see "Safety switch-off"). Placing hotpans on the sensors/indicators candamage the electronic unitunderneath.Keep the sensors and indicatorsclean and do not place anything ontop of them. Do not place hot panson them.

Operation

28

Fire hazard!Do not leave the cooktop unattendedwhilst it is being used.Please note that the heating up timeon induction cooktops is very muchshorter than on conventionalcooktops.

Switching on Touch the sensor.

appears in each of the cooking zoneindicators. If no further entry is made,the cooktop will turn itself off after a fewseconds for safety reasons.

Selecting/Changing the powersetting Touch the appropriate number sensor

for the power setting you want.

The selected power setting will appearin the cooking zone display.

Switching off To switch off a cooking zone, touch

the 0 sensor for that cooking zone.

To switch off the cooktop and all thecooking zones, touch the sensor.

Residual heat indicatorIf a cooking zone is still hot, the residualheat indicator will light up after it hasbeen switched off.

The lines of the residual heat indicatorgo out one after another as the cookingzone cools down. The last horizontalline only goes out when the cookingzone is safe to touch.

Danger of burning! Do not touchthe cooking zones whilst the residualheat indicators are lit up.

Operation

29

PowerFlex cooking areaThe PowerFlex cooking zones can becombined to form a PowerFlex cookingarea (see "Overview - Cooktop").Settings for the cooking area arecontrolled by the front or left PowerFlexcooking zone.

Switching on

Touch the or sensor.

will light up in the display for the rearor right cooking zone.

Set the power setting you want bytouching the appropriate numbersensor for the front or left cookingzone.

Switching off

Touch the or sensor.

Operation

30

Auto heat-upWhen Auto heat-up has been activated,the cooking zone switches onautomatically at the highest setting andthen switches to the continued cookingsetting which you have previouslyselected. The heat-up time depends onwhich continued cooking setting hasbeen chosen (see chart).

Activating

Touch the sensor for the continuedcooking setting you want until a tonesounds and the continued cookingsetting starts to flash in the cookingzone display.

The continued cooking setting selectedwill flash alternating with during theheat-up time (see chart).

Changing the continued cookingsetting while the cooking zone isheating up deactivates Auto heat-up.

Deactivating

Touch the sensor for the continuedcooking setting until the display lightsup constantly.

or

Select a different power setting.

Continuedcooking setting

Heat-up time[min : sec]

1 approx. 0 : 15

2 approx. 0 : 15

3 approx. 0 : 25

4 approx. 0 : 50

5 approx. 2 : 00

6 approx. 5 : 50

7 approx. 2 : 50

8 approx. 2 : 50

9 –

Operation

31

BoosterThe cooking zones are equipped with aBooster or TwinBooster (see "Overview– Cooktop"). You can use the Boosterfunction for a maximum of two cookingzones at the same time.

When activated, the power is boostedfor a maximum of 15 minutes so thatlarge quantities can be heated quickly,e.g. water for cooking pasta.

If the Booster function is switched onwhen

– no setting has been selected, thecooking zone will revert automaticallyto setting 9 at the end of the Boostertime or if the Booster function isswitched off before this.

– a setting has been selected, thecooking zone will revert automaticallyto the setting selected at the end ofthe Booster time or if the Boosterfunction is switched off before this.

Cooking zones are networked in pairsto supply the power for the Boosterfunction. When the Booster function isselected, a proportion of energy istaken away from the linked cookingzone and the following happens withinthe pairs:

– Auto heat-up is deactivated.

– The power setting is reduced.

– The linked cooking zone is switchedoff.

Operation

32

Switching on the Booster

Touch the 9 sensor twice for thecooking zone you wish.

will appear in the cooking zonedisplay.

Switching on the TwinBooster, level 1

Touch the 9 sensor twice for thecooking zone you wish to use.


Switching on the TwinBooster, level 2

Touch the 9 sensor three times for thecooking zone you wish to use.


Switching off the Booster /TwinBooster

Select a different power setting.

Operation

33

Keeping warm

The keeping warm function is notdesigned to reheat food from the coldstate. It is only for keeping food warmdirectly after cooking.

If the keeping warm function has beenactivated, the cooking zone will switchoff automatically after a maximum of 2hours.

– Only use pans for keeping foodwarm. Cover the pan with a lid.

– You do not have to stir food while it isbeing kept warm.

– Nutrients are lost when food iscooked, and continue to diminishwhen food is kept warm. The longerfood is kept warm for, the greater theloss of nutrients. Try to ensure thatfood is kept warm for as short a timeas possible.

Switching the keeping warm settingon/off

Touch the sensor for the requiredcooking zone.

Timer

34

You can select a time up to amaximum of 99 minutes.

The timer can be used for two differentfunctions:

– For setting the minute minder.

– To set a cooking zone to switch offautomatically.

Minute minder

Setting the minute minder

Touch the sensor.

Select the time you want with the - or+ sensor.

Changing the minute minder

Touch the sensor.

Select the time you want with the - or+ sensor.

Deleting the minute minder

Touch the sensor.

Touch and hold the - and + sensorsat the same time until appears inthe timer display.

Switching a cooking zone offautomaticallyYou can set a time after which thecooking zone will switch offautomatically. This function can beused on all cooking zones at the sametime.

If the time programmed is longer thanthe maximum operational timeallowed, the cooking zone will switchoff after the maximum time allowed(see "Safety switch-off").

Select a power setting for the zoneyou require.

Touch the sensor repeatedly untilthe symbol appears in the displayof the cooking zone you require.

Select the time you require.

If you want to set another cookingzone to switch off automatically,follow the same steps as describedabove.

If more than one switch-off time isprogrammed, the shortest timeremaining will appear in the displayand the symbol will light up in thedisplay for the corresponding cookingzone.

If you want to show the timeremaining for another zone which iscounting down in the background,touch the sensor repeatedly untilthe symbol appears in the displayof the cooking zone you require.

Timer

35

Using both timer functions atthe same timeThe minute minder and automaticswitch-off functions can be used at thesame time.

If you have programmed in one or moreswitch-off times, and would like to usethe minute minder as well:

Touch the sensor repeatedlyuntil and appear in the timerdisplay.

Set the time as described above.

If you have set the minute minder andwould like to programme in one or moreswitch-off times as well:

Touch the sensor repeatedly untilthe symbol appears in the displayof the cooking zone you require.

Set the time as described above.

Shortly after the last entry, the timerdisplay switches to the function with theshortest remaining time.

If you want to show the times remainingwhich are counting down in thebackground:

Touch the sensor repeatedly untilthe display you require appears.

Additional functions

36

Stop & GoWhen Stop & Go is activated, the powerof all cooking zones in use is reduced topower setting 1.The cooking zone power settings andthe timer settings cannot be altered andthe cooktop can only be switched off. Aset minute minder time will continue tocount down. Booster time, Auto heat-up and automatic switch-off times setwill be put on hold.

When Stop & Go is deactivated, thecooking zones will operate at the powersetting previously selected and all thetimes will resume running.

If the function is not deactivated within10 minutes, the cooktop will switchoff.

Activation / Deactivation

Touch the sensor.

Use this function when the sensorsneed to be cleaned quickly or there is arisk of boiling over.

RecallIf the cooktop is switched off in errorduring operation, this function can beused to reset all settings to the waythey were. For this to work, the cooktopmust be switched on again within 6seconds.

Switch the cooktop on again.

Touch the sensor within 6seconds after the cooktop isswitched on.

Safety features

37

System lock

The system lock is deactivated ifthere is an interruption to the powersupply.

Your cooktop is equipped with a systemlock to prevent it being switched on bymistake.

If an unavailable sensor is touchedwhilst the system lock is activated, will appear in the timer display for a fewseconds.

Activating

Switch the cooktop on .

Touch and hold the and sensors at the same time until appears in the timer display.

Deactivating


Touch and hold the and sensors at the same time until disappears from the timer display.

Safety features

38

Safety switch-off

Safety switch-off with an overlongcooking time

The safety switch-off mechanism istriggered automatically if one of thecooking zones is heated for anunusually long period of time. Thisperiod of time depends on the powersetting selected. Once exceeded, thecooking zone switches off and theresidual heat indicators appear. Thecooking zone can be operated againafter it has been switched off and backon.

Safety switch-off if the sensors arecovered

Your cooktop will switch offautomatically if one or several sensorsremain covered for more than about10 seconds, for example, by fingercontact, food boiling over or an object.The symbol will appear in the relevantcooking zone display and a tone willsound.The symbol will go out once you haveremoved the object or cleaned thecooktop and the cooktop will be readyto use again.

Safety features

39

Overheating protectionAll the induction coils and coolingelements for the electronics are fittedwith an overheating protectionmechanism. Before the induction coilsor cooling elements get too hot, theoverheating protection mechanism cutsin in one of the following ways:

– Any Booster function in operation willbe switched off.

– The set power level will be reduced.

– The cooking zone will switch offautomatically. will flash in thedisplay.

The overheating protection mechanismcan be triggered by:

– Heating up an empty pan.

– Fat or oil being heated on a highpower setting.

– Insufficient ventilation to theunderside of the cooktop.

– A hot cooking zone being switchedon after an interruption to the powersupply.

If, despite removing the cause, theoverheating protection mechanismtriggers again, contact Miele.

Cleaning and care

40

Danger of burning!The cooking zones must be switchedoff. The cooktop needs to cooldown.

Danger of injury!The steam from a steam cleaningappliance could reach electricalcomponents and cause a shortcircuit.Do not use a steam cleaner to cleanthe cooktop.

The use of unsuitable cleaningagents can cause the surfaces todiscolour or alter.The external surfaces of thisappliance are all susceptible toscratching.Remove any cleaning agent residuesimmediately.

Allow the cooktop to cool downbefore cleaning.

Clean the cooktop after every use.

Dry the cooktop thoroughly afterevery cleaning to avoid limescaleresidue.

Unsuitable cleaning agentsTo avoid damaging the surfaces of yourappliance, do not use:

– washing-up liquid,

– cleaning agents containing soda,alkalines, ammonia, acids orchlorides,

– cleaning agents containing descalingagents,

– stain or rust removers,

– abrasive cleaning agents, e.g.powder cleaners and cream cleaners,

– solvent-based cleaning agents,

– dishwasher cleaner,

– grill and oven cleaners,

– glass cleaning agents,

– hard, abrasive brushes or sponges,e.g. pot scourers, or sponges whichhave been previously used withabrasive cleaning agents,

– dirt erasers.

Cleaning and care

41

Cleaning the glass ceramicsurface

Risk of damage from pointedobjects!Do not clean the area between theglass ceramic surface and the frameor the frame and the worktop withsharp, pointed objects.

Not all soiling and residues can beremoved using a solution ofwashing-up liquid.An invisible film can develop that canlead to discolouration of the ceramicglass. This discolouration cannot beremoved.Clean the glass ceramic surfaceregularly with a suitable ceramiccooktop cleaning agent.

Remove any coarse soiling with adamp cloth and more stubbornsoiling with a glass scraper.

Then clean the ceramic glass surfacewith the Miele ceramic and stainlesssteel cooktop cleaner (see "Optionalaccessories") or with a proprietaryceramic glass cleaner applied with apaper towel or a clean cloth. Do notapply the cleaner while the cooktop isstill hot, as this can result in marking.Please follow the detergentmanufacturer's instructions.

Finally wipe the cooktop with a dampcloth and dry it with a soft, dry cloth.

Residues can burn onto the cooktopthe next time it is used and causedamage to the glass ceramic surface.Ensure that all cleaner residues areremoved.

Spots caused by limescale, waterand aluminium residues (spots with ametallic appearance) can be removedusing Miele's ceramic and stainlesssteel cooktop cleaner.

Danger of burning!Wear oven gloves when removingresidues of sugar, plastic oraluminium foil from a hot cooktop aglass scraper.

Should any sugar, plastic oraluminium foil spill or fall onto a hotcooking zone while it is in use, firstswitch off the appliance.

Then carefully scrape off theseresidues immediately whilst they arestill hot, using a shielded scraperblade.

Afterwards, clean the glass ceramicsurface in its cooled state, asdescribed above.

Problem solving guide

42

With the help of the following guide, minor faults in the performance of theappliance, some of which may result from incorrect operation, can be remediedwithout contacting Miele. This will save you time and money because you won'tneed a service call.

Please note that a call-out charge will be applied to unnecessary service visitswhere the problem could have been rectified as described in these operatinginstructions.

Problem Possible cause and remedy

The cooktop or cookingzones cannot beswitched on.

There is no power to the cooktop. Check if the circuit breaker has tripped. Contact

an electrician or Miele (for the minimum fuserating, see data plate).

There may be a technical fault. Disconnect the appliance from the electricity

supply for approx. 1 minute. To do this:– switch off at the wall socket, or switch off at the

isolator, or– disconnect the mains circuit breaker.

Reset the trip switch in the mains fuse box, andswitch the appliance back on. If it still will notswitch on, contact a qualified electrician or Miele.

A smell and vapours aregiven off when the newappliance is being used.

The metal components have a protective coating.When the appliance is used for the first time, thiscauses a smell and possibly also vapour. The materialfrom which the induction coils are made also gives offa smell in the first few hours of operation. This smellwill be less noticeable with each subsequent usebefore dissipating completely. The smell and anyvapour given off do not indicate a faulty connection orappliance and they are not hazardous to health.

In the display for acooking zone the symbol flashesalternately with theselected power settingor .

There is no pan on the cooking zone, or the pan isunsuitable. Use a suitable pan (see "Pans").


43


After switching thecooktop on, appearsin the timer display forseveral seconds.

The system lock has been activated. You need to deactivate the system lock (see

"System lock").

The symbol appearsin one or more cookingzone displays and thecooktop switches offautomatically.

One or several of the sensors are covered, forexample, by finger contact, food boiling over or by anobject such as an oven glove or tea towel. Remove the obstruction and/or clean the cooktop

(see "Safety switch-off").

A cooking zoneswitches itself offautomatically.

A cooking zone might have been operated for toolong. You can use the cooking zone again by switching

it back on (see "Safety switch-off").

A cooking zoneswitches itself offautomatically.

The overheating protection mechanism has beenactivated. See "Overheating protection".

The Booster hasautomatically switchedoff early.


The cooking zone is notworking in the usualway on the powersetting selected.


Power setting 9 isautomatically reduced ifyou select powersetting 9 on two linkedcooking zones orextended zones at thesame time.

Operating both zones at power setting 9 wouldexceed the permitted maximum power for thecooktop. Use another cooking zone which is not linked.

The food in the panhardly heats up or doesnot heat up at all whenthe Auto heat-upfunction is switched on.

There is too much food in the pan. Start cooking at the highest power setting and

then turn down to a lower one manually later on.The pan is not conducting heat properly. Use a different pan which is better able to conduct

heat on an induction cooktop.


44


A noise can be heardafter the appliance isswitched off.

The fan will continue running until the appliance hascooled down. It will then switch itself offautomatically.

and numbers areflashing in the cookingzone displays and atone sounds.

The cooktop is incorrectly connected. Contact Miele or a qualified electrician. The

cooktop must be connected to the mainsaccording to the wiring diagram.

or and numbers areflashing in the cookingzone displays.


or and other numbers.There is an electronic unit fault. Interrupt the power supply to the cooktop for

approx. 1 minute. If the problem persists after power is restored,

please contact Miele.

Optional accessories

45

Miele offers a range of usefulaccessories, as well as cleaning andconditioning products for yourappliance.

These products can be ordered fromthe Miele online shop.

They can also be ordered directly fromMiele (see end of this booklet forcontact details).

Saucepans and frying pansMiele offer a wide range of pans whichare perfect for Miele cooktops. Pleaserefer to the Miele website for moredetails on individual products.

– Pans in various sizes

– Frying pan with lid

– Non-stick pan

– Wok

– Gourmet oven dishes

Cleaning and care products

Original Miele ceramic and stainlesssteel cooktop cleaner 250 ml

Removes heavy soiling, limescaledeposits and aluminium residues.

Original Miele all purpose microfibrecloth

Removes finger marks and light soiling.

Con@ctivity

46

Your cooktop is communicationenabled and via the dongle suppliedwith selected rangehoods cancommunicate with the rangehood(Con@ctivity).

The cooktop sends information on itsoperating status to the rangehood. Theoperation of the rangehood isautomatically controlled by the powersetting of the connected cooktop.

Further information regardingCon@ctivity is available on the internetand in the instruction manuals of thevarious components.

Con@ctivity

47

Signing onIf you want to sign on your cooktop tothe Con@ctivity system, you will firstneed to sign on the rangehood.

Disconnect the cooktop from themains electricity supply.

Connect the dongle to the cooktop(see the installation instructions forthe dongle).

Reconnect the cooktop to the mainselectricity supply.

The signing on procedure must becarried out within 10 minutes afterreconnecting the electricity supply.

Start signing on the rangehood (seethe relevant instructions).

Remove any pots or pans from thecooktop.

There must not be any pots or panson the cooktop when the signing onprocess is being carried out.


Set power setting "1" for all thecooking zones.

The symbol will flash.

Wait for at least 1 minute and switchthe cooktop off .

Finish signing on the rangehood (seethe relevant instructions).

Safety instructions for installation

48

The appliance must only be installed and connected to the electricity supplyby a suitably qualified and competent person in strict accordance with currentnational and local safety regulations.

Fit the wall units and rangehood before fitting the cooktop to avoid damagingthe cooktop.

The veneer or laminate coatings of worktops (or adjacent kitchenunits) must be treated with 100 °C heat-resistant adhesive which willnot dissolve or distort. Any splashbacks must be of heat-resistantmaterial as well.

The cooktop must not be installed over a fridge, fridge-freezer,freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

This cooktop must not be installed above ovens unless thesehave a built-in cooling fan.

After installation, ensure that nothing can come into contact withthe connection cable and that it is without hindrance.

The connection cable may not come into contact with any movingkitchen component (e.g. a drawer) or be subject to mechanicalobstruction which could damage it.

Observe carefully the safety clearances listed on the followingpages.All dimensions in this instruction booklet are given in mm.

Safety distances

49

Safety distance above thecooktop

A minimum safety distance must bemaintained between the cooktop andthe rangehood above it. See therangehood manufacturer's operatingand installation instructions for details.

If the manufacturer's instructions arenot available for the rangehood, aminimum safety distance of 600 mmmust be maintained.

For any flammable objects, e.g. utensilrails, wall units etc., a minimum safetydistance of 600 mm must bemaintained between these objects andthe highest part of the cooktop below.

When two or more appliances whichhave different safety distances areinstalled together below arangehood, you should observe thegreatest safety distance.

Safety distances

50

Safety distances to the sidesand back of the applianceIdeally the cooktop should be installedwith plenty of space on either side.There may be a wall at the rear or a tallunit or wall on one side (right or left),taking into account the distancesbelow. On the other side, however, notall unit or wall should stand closer than300 mm to the edge of the cooktop.Before installing the cooktop, checkthat the below clearance requirementsare met.

Minimum horizontal distance from theback edge of the cooktop to acombustible surface:50 mm.

Minimum horizontal distance from theright edge of the cooktop to acombustible surface:50 mm.

Minimum horizontal distance from theleft edge of the cooktop to acombustible surface:50 mm.

Minimum safety distancesunderneath the cooktopTo ensure sufficient ventilation to thecooktop, a certain gap must be leftbetween the underside of the cooktopand any oven, interim shelf or drawer.

The minimum gap between theunderside of the cooktop and

– the top of an oven is 15 mm.

– the top of an interim shelf is 15 mm.

– the base of a drawer is 75 mm.

Interim shelfIt is not necessary to fit an interim shelfunderneath the cooktop but one maybe fitted if you wish.

Leave a gap of 10 mm at the back ofthe shelf to accommodate the cable.Miele recommends a gap at the front ofthe shelf of 20 mm to ensure goodventilation.

Cooktops with frame or bevelled edge

51

Installation notes

Seal between the cooktop and theworktop

Do not use sealant between thecooktop and the worktop. This couldresult in damage to the cooktop orthe worktop if the cooktop everneeds to be removed for servicing.The sealing strip under the edge ofthe top part of the applianceprovides a sufficient seal for theworktop.

Tiled worktop

Grout lines and the hatched areaunderneath the cooktop frame must besmooth and even. If they are not, thecooktop will not sit flush with theworktop and the sealing stripunderneath the cooktop will not providea good seal between the cooktop andthe worktop.


52

Building-in dimensions

KM 6328-1

a Front

b Building-in depth

c Mains connection box

d Con@ctivity connection

The mains connection cable (1440 mm long) is supplied separately with thecooktop.


53

KM 6366-1

a Front

b Building-in depth


d Con@ctivity connection



54

Installation

Preparing the worktop

Make the worktop cut-out as shownin "Building-in dimensions". Observethe safety distances (see "Safetydistances").

Seal the cut surfaces on woodenworktops with a suitable sealant toavoid swelling caused by moisture.The sealant must be heat-resistant.

Make sure the sealant does notcome into contact with the topsurface of the worktop.

The seal underneath the cooktop willhold it securely in the cut-out. Any gapbetween the frame and worktop willreduce with time.

Connecting the mains connectioncable to the appliance

The mains connection cable must beconnected by a suitably qualified andcompetent electrician in accordancewith current local and national safetyregulations.

Follow the instructions in the wiringdiagram (see "Electrical connection -Wiring diagram").

Installing the cooktop

Feed the mains connection cabledown through the cut-out.

Place the cooktop centrally in thecut-out. When doing this, make surethat the seal under the cooktop sitsflush with the worktop on all sides.This is important to ensure aneffective seal all round.

Do not use any additional sealant(e.g. silicone).

If the seal does not meet the worktopcorrectly on the corners, the cornerradii (≤ R4) can be carefully scribed tosuit.

Connect the cooktop to the mainselectricity supply.

Check that the cooktop works.

Flush-fitted cooktops

55

Installation notes

Flush fit cooktops are only suitable forinstallation in natural stone (granite,marble), tiled or solid wood worktops.Certain models are suitable forbuilding into glass worktops - pleasesee advice under "Building-indimensions". When using a worktopmade from any other material, pleasecheck first with the worktopmanufacturer that it is suitable forinstalling a flush fit cooktop.

The internal width of the base unitmust be at least as wide as theinternal cut-out width for the cooktop(see "Building-in dimensions"). This isto ensure that the casing can be easilyremoved for maintenance. If theunderside of the cooktop is not freelyaccessible after installation, anysealant used to plug the gaps aroundthe appliance must be removed toenable the cooktop to be lifted out ofthe cut-out should this be necessary.

The cooktop can be installed

– in a suitable cut-out in a natural stoneworktop.

– in a suitable cut-out in a tiled or solidwood worktop with a woodensupport frame. The frame must beprovided on site, and is not suppliedwith the appliance.


56

Building-in dimensions

KM 6367-1

a Front

b Building-in depth


d Stepped cut-out

e Con@ctivity connection


Cut-out dimensions for granite or marble worktops. Please take careful noteof the inset diagram.


57

Installation

Granite and marble worktops

a Worktop

b Cooktop

c Gap

As the ceramic glass and the worktopcut-out have a certain dimensionaltolerance, the size of gap can vary(min. 1 mm).

d Stepped cut-out

Solid wood / tiled / glass worktops

a Worktop

b Cooktop

c Gap

d Wooden frame 13 mm (not suppliedwith appliance)

As the ceramic glass and the worktopcut-out have a certain dimensionaltolerance, the size of gap can vary(min. 1 mm).


58

Preparing the worktop

Make the worktop cut-out as shownin "Building-in dimensions". Observethe safety distances (see "Safetydistances").

Solid wood, tiled and glass worktops:Fix the wooden frame 7 mm belowthe top edge of the worktop (seediagram).

Connecting the mains connectioncable to the appliance

The mains connection cable must beconnected by a suitably qualified andcompetent electrician in accordancewith current local and national safetyregulations.

Follow the instructions in the wiringdiagram (see "Electrical connection -Wiring diagram").

Installing the cooktop

Feed the mains connection cabledown through the cut-out.

Centre the cooktop in the cut-out.

Connect the cooktop to the mainselectricity supply.

Check that the cooktop works.

Seal the remaining gap with asilicone sealant that is heat-resistantto at least 160 °C.

For natural stone worktops andnatural stone tiles, only use siliconesealant that is specially formulatedfor natural stone, and observe thesealant manufacturer's instructions.

Electrical connection

59

Danger of injury!Incorrect installation, maintenance orrepair work is dangerous to users.Miele cannot be held liable fordamage or injury caused by incorrectinstallation, maintenance or repairwork, or by an inadequate or faultyearthing system (e.g. electric shock).All electrical work must be carriedout by a suitably qualified andcompetent person, in strictaccordance with current national andlocal safety regulations.After installation, ensure that allelectrical components are shieldedand cannot be accessed by users.

ConnectionAC 230 V, 50 Hz

The voltage and rated load are given onthe data plate. Please ensure thesematch the household mains supply.

Connection must be made via asuitable isolator switch which providesdisconnection on all poles and whichcomplies with national and local safetyregulations. When switched off theremust be an all-pole contact gap of atleast 3 mm in the isolator switch. Theisolator switch must be easilyaccessible after the appliance has beenbuilt in.

Please see the wiring diagram forconnection.

Residual current deviceFor extra safety, it is advisable toprotect the appliance with a suitableresidual current device (RCD) with a triprange of 30 mA.

Mains connection cableThe cooktop must be connected to theelectrical supply with a specialconnection cable, type H 05 VV-F (PVCinsulated) with a suitable diameter.

Please see the wiring diagram forconnection.

See the data plate on the cooktop forthe correct voltage and frequency.

Electrical connection

60

Replacing the mainsconnection cable

Danger of electrical shock!The mains connection cable mustonly be replaced by a suitablyqualified and competent person inaccordance with current local andnational safety regulations.The earth lead must be connected tothe point marked .

If the mains connection cable needs tobe replaced, it must be replaced with aspecial connection cable, type H 05 VV-F (PVC insulated), available from Miele,in order to avoid a hazard.

The connection data is given on thedata plate.

Wiring diagram

L1

200-240 V~

200-240 V~

200-240 V~

� � � � � �L2 L3 N

�L2

�L1

� � �N

�

(L3)

200-240 V~

200-240 V~

�L1

� � �N

� �

(L2)200-240 V~

Service

61

Contact in case of faultIn the event of any faults which you cannot remedy yourself, please contact Miele.

Contact information for Miele can be found at the end of this document.

Please quote the model and serial number of your appliance when contactingMiele. This information can be found on the data plate.

Data plate:Adhere the extra data plate supplied with the appliance in the space below. Makesure that the model number matches the one specified on the back cover of thisdocument.

WarrantyThe manufacturer's warranty for this appliance is 2 years.

For further information, please refer to your warranty booklet.

www.miele.com.au

Miele Experience Centre and Head Office Melbourne:1 Gilbert Park DriveKnoxfield, VIC 3180

Miele Experience Centre South Melbourne:206-210 Coventry StreetSouth Melbourne, VIC 3205

Miele Experience Centre and Office Sydney:3 Skyline PlaceFrenchs Forest, NSW 2086

Miele Experience Centre and Office Brisbane:39 Harvey Street NorthEagle Farm, QLD 4009

Miele Experience Centre and Office Perth:

83-85 Sir Donald Bradman DriveHilton, SA 5033

205-207 Stirling HighwayClaremont, WA 6010

Miele Experience Centre and Office Adelaide:

Miele Australia Pty. Ltd.

Miele New Zealand Limited

Level 2, 10 College HillFreemans Bay, Auckland 1011

Miele Experience CentreAuckland:8 College HillFreemans Bay, Auckland 1011Telephone:0800 464 353 (0800 4 MIELE)www.miele.co.nz

Miele Global HeadquartersGermanyMiele & Cie. KGCarl-Miele-Straße 2933332 GüterslohFederal Republic of Germany

Head Office:

IRD 98 463 631

ACN 005 635 398ABN 96 005 635 398

Miele Experience Centre Gold Coast:131 Ferry RoadSouthport, QLD 4215

M.-Nr. 10 032 900 / 02en-AU, NZ

KM 6328-1 / KM 6366-1 / KM 6367-1

operating and installation instructions ... - miele.co.nz€¦ · available from miele, by a miele...

Documents