openfoam.pdf
TRANSCRIPT
-
Brochure naam 1
OpenFOAM & HELYX-OS for Industrial CFD ApplicationsTraining Course
For Whom?
The training is intended for engineers in-
volved with Computational Fluid Dynamics
(CFD) and related flow and heat transfer
problems in industry
Goals
Getting started to use the OpenFOAM
framework
Learn to use HELYX-OS as a front-end for
OpenFOAM
-
2 OpenFOAM and HELYX-OS for Industrial CFD Applications
This OpenFOAM/HELYX-OS training course is to
achieve the following goals:
Getting started and become familiar with the
OpenFOAM framework, commonly used
solvers and relevant industrial examples
Learn to use the open-source Graphical
User Interface HELYX-OS as the native front-
end for OpenFOAM
Content
During this 2-day training, the attendants will be
introduced to the open-source CFD technology
OpenFOAM using HELYX-OS. The most com-
monly used CFD solver capabilities of Open-
FOAM will be explored, combined with an in-
depth look in the structure of the Computational
Fluid Dynamics Library, which forms the base of
all OpenFOAM fluid flow solvers. The open-sour-
ce native GUI HELYX-OS, developed by Engys Ltd.
will be used extensively.
Using hands-on practical sessions, you will learn
to setup, run and post-process cases which are
relevant to realistic industrial applications. We
will be using the standard mesh generator avai-
lable in OpenFOAM throughout the training. Ad-
ditionally, the enhanced mesh generator develo-
ped by ENGYS and provided with HELYX will be
demonstrated as a valid meshing technology on
par with commercial CFD for industrial applica-
tions.
Interactive training
The training is a good mix of short presentations
provided by the trainer, illustrated by means of
digital slides including theoretical and practi-
cal background as well as hands-on cases and
examples. The participant will use HELYX-OS to
pre-process, model and solve relevant industrial
applications in OpenFOAM related to different
engineering fields like incompressible/compres-
sible flows, heat transfer and multiphase flows.
An overview of the post-processing capabilities
will be described as well as using Paraview, the
general vizualization tool used from within Open-
FOAM and HELYX-OS.
For Whom?
The training is intended for engineers involved in
fluid flows and heat transfer problems in industry
that are considering the use of OpenFOAM. The
OpenFOAM and HELYX-OS for Industrial CFD ApplicationsTC-3000-04
The training OpenFOAM and HELYX-OS for Industrial CFD Applications is a 2-day training course
-
3OpenFOAM and HELYX-OS for Industrial CFD Applications
participants will be introduced to fluid dynamics
and corresponding CFD methods and solvers
that are available in OpenFOAM. The front-end
software package HELYX-OS will be introdu-
ced and extensively used to model and analyze
industrial case studies in different fields like
incompressible/compressible flows, heat trans-
fer and multiphase flows among other topics.
Basic theoretical background on flow and heat
transfer mechanisms is preferable. The course
language is English.
Results
The participants will learn to model, solve and
post-process relevant industrial applications
using OpenFOAM and HELYX-OS. You will also
obtain experience in using HELYX-OS to use the
standard mesh generator available in Open-
FOAM. After completing the course, the partici-
pant will be able to:
Understand the basics of Computational
Fluid Dynamics
Model and mesh generation of complex
geometries using OpenFOAM and HELYX-
OS
Use OpenFOAM solvers on industrial
applications related to a variety of fields like
fluid flows, heat transfer and multiphase
problems among other topics
Post-process the results from within Open-
FOAM and HELYX-OS and using the visuali-
zation toolkit Paraview
The trainer
The experienced consultants of Dynaflow Re-
search Group (DRG) will conduct the training.
The DRG trainers aim for effective practical tech-
nical solutions based on a good understanding of
the theory behind these problems. All technical
consultants work with these technical issues on
a day-to-day basis in their client work. They have
up to 10 years experience in using OpenFOAM
are constantly challenged to translate theory into
practical solutions.
Duration and group-size
The duration of the training is 2 full days ( 8-9
hours per day). The minimum group-size is 6
participants and the maximum group-size is 10
participants. The training will be organized at the
DRG office or upon request at the customer lo-
cation.
Costs
The training will cost EUR 1.200,= per person
excluding VAT. Training material and a bootable
USB disk will be provided containing a working
HELYX-OS/OpenFOAM installation together with
working examples.
Contact
If additional information is required, please
contact us by e-mail: [email protected] or by
phone: +31 793615150.
-
4 OpenFOAM and HELYX-OS for Industrial CFD Applications
Program outline
DAY 1
Meshing, steady state and porous media
Course Overview
HELYX-OS Overview/Methodology/Work-
flow
Theory: snappyHexMesh Process
Case Studies: Meshing strategies and cases
for snapping and layer addition
Theory: Steady-State solvers (compressible
and incompressible)
Case Studies: Steady-State cases
Theory: MRF and Porous media in Steady
State Cases
Case Studies: MRF and/or Porous Media
flows (Continuous Stirred Tank Reactors,
pressure drop in monolith reactor, filters)
Theory: RANS Models and Application (k-
Epsilon, SA, k-omega, v2f)
Case Studies: Conical Diffuser or turbulent
jet cases
DAY 2
More advanced features
Theory: Transient Solvers (PIMPLE)
Case Studies: URANS or DES Flows
Theory: Thermal Transport and Buoyant
Flows
Case Studies: HVAC/Thermal Transport/
Heat transfer cases
Overview of Paraview and Walkthrough of
methodology i.e. concept of paraview filters
and object inspector
Case Studies: Running and post processing
full cases
Overview of batch processes in OpenFOAM
(i.e. Workflow with OpenFOAM integrating
HELYX-OS for meshing and command line
solvers/utilities afterwards)
Case Study: Meshing a geometry and Execu-
ting a multiphase solver
-
5OpenFOAM and HELYX-OS for Industrial CFD Applications
Dynaflow Research Group (DRG) is a world wide well respected consultant. We help our clients solve their most complex and critical technical issues
Dynaflow Reseach Group
Consulting services
We provide engineering consulting services in all
aspects of design and analysis for the Petro- che-
mical industry. Our work often requires a multi-
disciplinary approach where we combine exper-
tise in fluid flow behaviour, dynamic oscillations,
FEM and stress analysis with sophisticated analy-
sis software to predict system performances.
Training
DRG offers a wide range of training courses such
as software training, fiberglass training, dyna-
mics and stress training. Most of these training
courses are offered on a regular basis during
the year. We also develop customized training
programs with our customers fit to their specific
needs.
Products
DRG has been developing software for many
years which, has resulted in several commercially
available software packages such as BOSfluids,
BOSpulse, Jive and Hades. We also provide tech-
nical consulting services, and develop numerical
software that can be used in computer simulati-
ons and other types of scientific computations.
Research
DRG conducts research on different aspects of
pipe-system design and pressure vessels. Most
of this research is done in close collaboration
with Paulin Research Group and their Houston
test facilities (www.paulin.com). Dynaflow Re-
search Group provides support to clients with
their R&D to help them continuously improve
their products.
-
6 OpenFOAM and HELYX-OS for Industrial CFD Applications
Topic specific brochures:
Consulting Service Series Software Product Series Training Series
Visit our website www.dynaflow.com or send an e-mail to [email protected]
-
Houtsingel 95 2719 EB Zoetermeer The NetherlandsReg nr. 27320315
TF E W
+31 79 361 5150+31 79 361 [email protected]