opel combo infotainment manual · introduction 5 handsfree system, so you can transfer phone...
TRANSCRIPT
Introduction .................................... 4Radio ........................................... 24CD Player .................................... 31AUX input ..................................... 35USB port ...................................... 37Voice recognition ......................... 42Phone .......................................... 50Index ............................................ 64
Contents
4 Introduction
Introduction
General information ....................... 4Theft-deterrent feature ................... 6Control elements overview ............ 8Usage .......................................... 14Tone settings ............................... 18Volume settings ........................... 19
General informationInfotainment systemThe Infotainment system providesyou with state-of-the-art in-carinfotainment.The Radio is equipped with 6 stationbuttons for storing radio stations onFM and AM wavebands, Autostore -an automatic radio station storingfunction - and Radio data system(RDS) for enhanced reception andtraffic information.The CD player can play audio CDs,CD-R and CD-RW CDs and,depending on version, also playsMP3 CDs.The digital sound processor providesyou with preset and user-definedequalizer modes for soundoptimisation1).The well-thought-out design of thecontrol elements and the cleardisplays enable you to control thesystem easily and intuitively.
NoteThis manual describes all optionsand features available for thevarious Infotainment systems.Certain descriptions, including thosefor display and menu functions, maynot apply to your vehicle due tomodel variant, countryspecifications, special equipment oraccessories.
Handsfree system withmultimediaThe Handsfree system is compatiblewith the Radio with CD / MP3 playerand allows you to operate variousphone and audio functions with thesteering wheel controls or the Voicerecognition system.The Handsfree system is equippedwith Bluetooth technology for mobilephone operation, SMS text messagereader, USB Media player and isprogrammed to recognise a widerange of voice commands.Bluetooth technology enables you toestablish a connection between aBluetooth mobile phone and the
1) Only Radio with CD / MP3 player.
Introduction 5
Handsfree system, so you cantransfer phone operation to thevehicle.The SMS Message reader uses voicesynthesis and Bluetooth technologyto read incoming mobile phone textmessages over the vehicle speakers.NoteNot all Handsfree phone systemfunctions are supported by everymobile phone. The possible phonefunctions depend on the relevantmobile phone and network provider.Refer to the operating instructions inyour mobile phone handbook orconsult your network provider.
The Media player allows you to playand control digital audio stored on aUSB device. External data storagedevices, e.g. iPod or MP3 player canbe connected to the Media player viathe USB port.The Voice recognition systemenables you to make and receivephone calls, access SMS textmessages and operate the Media
player using a series of voicecommands, for increased safety andconvenience.Further external devices, e.g.portable CD player, can also beconnected to the AUX input andplayed over the Infotainment system.
Important information onoperation and traffic safety
9 Warning
Drive safely at all times whenoperating the Infotainment andHandsfree systems.If in doubt, stop the vehicle beforeoperating.
Using this manual● This manual describes the
options and features available.Certain controls anddescriptions, including symbols,displays and menu functions maynot apply to your vehicle due tomodel variant, countryspecifications, special equipmentor accessories.
● The table of contents at thebeginning of this manual andwithin each section shows wherethe information is located.
● The index will enable you tosearch for specific information.
● The vehicle display screens maynot support your specificlanguage.
● Display messages and interiorlabelling are written in boldletters.
Warnings and Cautions
9 Warning
Text marked 9 Warning providesinformation on risk of accident orinjury. Disregarding thisinformation may lead to injury.
6 Introduction
Caution
Text marked Caution providesinformation on possible damage tothe vehicle. Disregarding thisinformation may lead to vehicledamage.
SymbolsPage references are indicated with 3.3 means "see page".
Theft-deterrent featureSecurity systemThe Infotainment system is equippedwith an electronic security system forthe purpose of theft deterrence.The Infotainment system functionsonly in your vehicle and is thereforeworthless to a thief.
Security codeA 4-digit security code (suppliedseparately) must be entered uponfirst use of the Infotainment systemand after prolonged interruptions tothe power supply, to unblock theInfotainment system.
Entering the security codeWhen switching on the Infotainmentsystem for the first time, the messageRadio code - - - - is shown briefly inthe display and the 4-digit securitycode must be entered.If no code is entered within a set timelimit, Enter code - - - - will appear.To enter the security code:● Press repeatedly the numbered
button 1 on the Infotainmentsystem until the desired first digitis displayed.
● Enter the 2nd, 3rd and 4th digitsusing buttons 2, 3 and 4 in thesame way.
When the 4th digit of the security codehas been entered, the Infotainmentsystem is unblocked after a briefperiod.
Incorrect code enteredWhen an incorrect code has beenentered, an audible signal is soundedand Radio blocked/wait is shown inthe display, along with a countdowntimer.Wait until the countdown time hasexpired and Radio blocked/waitdisappears from the display, thenenter the correct code.Each time the code is enteredincorrectly, the countdown time isdoubled.
Code CardThe Code Card certifies ownership ofthe Infotainment system and containsthe radio model, serial number andradio code.NoteKeep the Code Card in a safe place.If the Infotainment system is stolen,the relevant authorities can besupplied with these importantdetails.
Introduction 7
Handsfree system codeAfter the Infotainment system securitycode has been entered correctly andboth the Infotainment and Handsfreesystems are operational, it is possibleto view the Handsfree systemidentification code.Using the buttons on the steeringwheel:1. Press  / MENU.2. Select SETTINGS using R / S,
and press SRC/OK.3. Select Advanced features using
R / S, and press SRC/OK.4. Select System code using R / S,
and press SRC/OK.The 8-digit identification code isshown on the display.NoteThe 8-digit Handsfree systemidentification code is unique to yourHandsfree system and cannot bechanged.
The identification code can also beaccessed using voice recognition3 42.
Introduction 9
1 ON/OFF ................................ 14
Rotate: Adjust volume ........... 19
Short press: Switch on .......... 14
Long press: Switch off .......... 14
Radio - Short press: Mute/unmute .................................. 24
CD player - Short press:Pause/unpause ..................... 32
2 BAND - Short press:Change waveband ................ 24
Long press: Autostorestations .................................. 26
3 SRC: Change audiosource (radio, CD player) ...... 24
4 AUDIO: Audio settingsmenu ..................................... 18
5 MENU: Advancedfunctions menu ...................... 27
6 _ / 6: Adjust values inmenu items ........................... 14
Radio - Short press:Automatic station search ...... 25
Long press: Manualstation search ........................ 25
CD player - Short press:Skip to previous/next track .... 32
Long press: Fast rewind /fast forward ........................... 32
7 Station buttons 1...6 ............. 24
Short press: Recall storedradio station .......................... 25
Long press: Store radiostation ................................... 26
8 CD ejection ........................... 32
Introduction 11
1 m ON/OFF: Switch on /switch off ............................... 14
2 FM: Change audio sourceto FM radio ............................ 24
Switch FM band selection(FM1, FM2, FM Autostore) .... 24
3 AM: Change audio sourceto AM radio ............................ 24
Switch AM band selection(AM1, AM2) ........................... 24
4 MEDIA: Change audiosource (CD player, Mediaplayer, AUX) .......................... 32
5 MUTE .................................... 19
Radio - Mute/unmute ............ 19
CD player, Media player -Pause/unpause ..................... 19
6 AUDIO: Audio settingsmenu ..................................... 18
7 MENU: Advancedfunctions menu ...................... 27
8 R / S .................................... 14
Rotate: Adjust volume ........... 19
Press: Scroll throughdisplay menu options ............ 14
Radio - Press: Manualradio station search .............. 25
CD player - Press: Skip toprevious/next folder (MP3CDs) ...................................... 32
Media player - Press: Skipto previous/next folder,artist, genre etc. .................... 38
9 _ / 6: Adjust values inmenu items ........................... 14
Radio - Press: Automaticradio station search .............. 25
CD player - Short press:Skip to previous/next track .... 32
Long press: Fast rewind /fast forward ........................... 32
Media player - Press: Skipto previous/next track ............ 38
10 Station buttons 1...6 ............. 24
Short press: Recall storedradio station .......................... 25
Long press: Store radiostation ................................... 26
11 CD ejection ........................... 32
Introduction 13
1 Â / MENU ............................. 54
Short press: Access menus . . 14
Short press: Confirmmenu options ........................ 54
Phone - Short press:Accept call ............................. 54
Short press: Changephone conversation duringcall ......................................... 54
Long press: Reject call,end call .................................. 54
Message reader - Selectdisplayed text message ........ 54
2 Ã / q .................................... 54
Exit menu or return toprevious menu withoutsaving .................................... 54
Media player - Pause/unpause ................................ 50
Phone - Mute/unmutemicrophone during phoneconversation .......................... 50
Mute ringtone for incomingcalls ....................................... 50
Message reader - Interruptreading of a text message ... . 54
Voice recognition -Interrupt a voice message ... . 42
Deactivate voicerecognition ............................ 42
3 s ........................................... 42
Short press: Activate voicerecognition ............................ 42
Short press: Interrupt avoice message and say anew voice command ............. 42
Long press: Repeat lastvoice message ...................... 42
4 < / ] ..................................... 19
Adjust volume ....................... 195 R / S .................................... 54
Scroll through displaymenu options ........................ 54
Media player - Select tracks .. 38
Message reader - Scrollthrough text messages ......... 54
6 SRC/OK ................................ 54
Confirm menu options ........... 54
Change audio source(radio, CD player, Mediaplayer) ................................... 54
Phone - Transfer phoneconversation betweenHandsfree system andmobile phone ........................ 54
Message reader - Selectdisplayed text message ........ 54
14 Introduction
UsageControl operations forRadio with CD player:The Infotainment system is equippedwith Radio and CD player functionsand various adjustable radio andaudio settings.The Infotainment system is controlledvia a rotary knob, function buttons,and the menus shown on the display.
Switch on / switch offPress the ON/OFF rotary knob toswitch the Infotainment system on.The previously used audio source isactivated.Removing the key from the ignitiondoes not switch off the Infotainmentsystem.Press and hold ON/OFF rotary knobto switch off or it will switch offautomatically after approx.20 minutes, to avoid discharging thevehicle battery.
VolumeRotate the ON/OFF rotary knob toadjust the volume.The current setting is shown on thedisplay.
Maximum start-up volumeWhen the Infotainment system isswitched on, the last selected volumeis set by default, providing thatvolume was lower than the fixedmaximum start-up volume.
Automatic volume adjustmentIf the volume is adjusted during atraffic announcement, the new settingonly remains during theannouncement and automaticallyreturns to the previous volumesetting.
Mute / pausePress the ON/OFF rotary knob tomute the Radio or pause the CDplayer. Mute or Pause is shown on thedisplay.To unmute/unpause, press ON/OFFagain.
NoteAdjusting the volume automaticallycancels the mute/pause function.
Menus on the display screenAccess and navigate menus on thedisplay and adjust values using thefunction buttons on the Infotainmentsystem:● Press AUDIO repeatedly to
access the Audio settings menuitems 3 18.
● Press MENU repeatedly toaccess the Advanced functionsmenu items 3 27.
● Press _ or 6 to adjust values inmenu items.
Changes are saved and menus areexited automatically after a briefperiod.
Introduction 15
Modes of operation
RadioOperate the Radio using the functionbuttons:● Press SRC to change the audio
source to radio.● Press BAND repeatedly to switch
waveband selection (FM1, FM2,FMT Autostore, AM).Press and hold BAND toAutostore stations.
● Press the Station buttons 1...6 torecall a stored radio station.Press and hold 1...6 to store aradio station.
● Press _ or 6 to search radiostations.
Using the Radio 3 24.
CD playerOperate the CD player using thefunction buttons:● Press SRC to change the audio
source to CD player.● Press _ or 6 to skip to previous/
next track. Press and hold to fastrewind / fast forward.
● Press f to eject a CD.Using the CD player 3 32.
Control operations forRadio with CD / MP3 playerThe Infotainment system is equippedwith Radio, CD player (including MP3CD compatibility), USB Media playerand AUX functions and variousadjustable radio and audio settings.The Infotainment system is controlledvia a rotary knob, function buttons,and the menus shown on the display.
Switch on / switch offPress the X ON/OFF button to switchthe Infotainment system on. Thepreviously used audio source isactivated.
Press X ON/OFF to switch off.
Automatic switch-offIf the Infotainment system is switchedon while the ignition is off, it will switchoff automatically after approx.20 minutes, to avoid discharging thevehicle battery.
VolumeRotate the R/S rotary knob to adjustthe volume.The current setting is shown on thedisplay.
Maximum start-up volumeWhen the Infotainment system isswitched on, the last selected volumeis set by default, providing thatvolume was lower than the fixedmaximum start-up volume.
Automatic volume adjustmentIf the volume is adjusted during atraffic announcement, the new settingonly remains during theannouncement and automaticallyreturns to the previous volumesetting.
16 Introduction
Mute / pausePress the MUTE button to mute theRadio or pause the CD player orMedia player. Mute or Pause isshown on the display.To unmute/unpause, press MUTEagain.NoteAdjusting the volume automaticallycancels the mute/pause function.
Speed dependent volumeWhen speed dependent volume isactivated (3 19), the volume isadapted automatically to compensatefor road and wind noise.
Menus on the display screenAccess and navigate menus on thedisplay and adjust values using thefunction buttons on the Infotainmentsystem:● Press AUDIO to access the
Audio settings menu 3 18.● Press MENU to access the
Advanced functions menu3 27.
● Press R or S to scroll throughdisplay menu options.
● Press _ or 6 to adjust values inmenu items.
Changes are saved and menus areexited automatically after a briefperiod.
Modes of operation
RadioOperate the Radio using the functionbuttons:● Press FM to change the audio
source to FM radio.Press FM repeatedly to switchFM band selection (FM1, FM2,FMA Autostore).
● Press AM to change the audiosource to AM radio.Press AM repeatedly to switchAM band selection (AM1, AM2).
● Press the Station buttons 1...6 torecall a stored radio station.Press and hold 1...6 to store aradio station.
● Press _ or 6 to automaticallysearch radio stations.
● Press R or S to manually searchradio stations.
Using the Radio 3 24.
Audio playersOperate the audio players using thefunction buttons:● Press MEDIA repeatedly to
change the audio source to CDplayer, Media Player or AUXinput.
● Press _ or 6 to skip to previous/next track.Press and hold to fast rewind /fast forward (CD player).
● Press R or S to skip to previous/next folder (MP3 CDs) or artist,genre etc. (Media player).
● Press f to eject a CD.Using the CD player 3 32.Using the AUX input 3 35.Using the USB Media player 3 38.
Introduction 17
Control operations for Handsfreesystem:The Handsfree system is equippedwith steering wheel controls forBluetooth phone, SMS Messagereader and Media player operationand for activating Voice recognition.
VolumePress < or ] to adjust the volume.The current setting is shown on thedisplay.
Mute / pausePress à / q to mute phone calls andringtones or pause the Media player.Mute or Pause is shown on thedisplay.To unmute/unpause, press à / qagain.NoteAdjusting the volume automaticallycancels the mute/pause function.
Menus on the display screenAccess and navigate menus on thedisplay using the steering wheelcontrols:● Press  / MENU to access
menus.● Press R or S to scroll through
display menu options.● Press SRC/OK (or  / MENU) to
confirm menu options.● Press à / q to exit menu or
return to previous menu withoutsaving.
Changes are saved and menus areexited automatically after a briefperiod.Using the Handsfree phone system3 50.
Modes of operationUse the steering wheel controls tooperate the functions of theHandsfree system:
PhoneThe most important Phone functionsare operated as follows:● Accept a phone call: Press  /
MENU.● End or reject a phone call: Press
and hold  / MENU.● Mute microphone during a phone
conversation: Press à / q.● Transfer phone conversation
between Handsfree system andmobile phone: Press SRC/OK.
● Change to another phoneconversation during a phone call:Press  / MENU.
Using the Phone 3 54.
SMS Message readerThe most important Message readerfunctions are operated as follows:● Scroll through text messages:
Press R or S.● Select displayed text message:
Press SRC/OK (or  / MENU).● Interrupt reading of a text
message: Press à / q.Using the Message reader 3 54.
18 Introduction
Media playerThe most important Media playerfunctions are operated as follows:● Select tracks: Press R or S.● Change the audio source to
Media player: Press repeatedlySRC/OK.
Using the Media player 3 38.
Voice recognitionThe most important Voice recognitionfunctions are operated as follows:● Activate voice recognition: Press
s.● Interrupt a voice message and
deactivate voice recognition:Press à / q.
● Interrupt a voice message andsay a new voice command: Presss.
● Repeat last voice message:Press and hold s.
Using Voice recognition 3 42.
Language settingTo change the voice recognitionlanguage, refer to the vehicle Owner'sManual or consult your Opel ServicePartner.
Restore default system settingsTo restore all system settings to thefactory values:1. Press MENU.2. Select System reset using R / S,
and press SRC/OK.3. Select Yes or No using _ or 6,
and press SRC/OK.When Yes is selected, Resettingis shown on the display and thedefault system settings arerestored after a brief period.
Changes are saved and menus areexited automatically after a briefperiod. Alternatively, press MENUagain to save and exit when resettingis complete.NoteThe previous source is resumed andshown on the display.
Tone settingsIn the Audio settings menu, the tonecharacteristics can be set.Press the AUDIO button on theInfotainment system to open theAudio settings menu.
Select audio settingsSelect the desired audio setting fromthe menu in the display:Radio with CD player: Press AUDIObutton repeatedly.Radio with CD / MP3 player: Pressthe R or S button.● Bass (bass)● Treble (treble)● Balance (left/right balance)● Fader (front/rear balance)● Loudness (Iow volume sound
enhancement ON or OFF)
Introduction 19
Radio with CD / MP3 player:● Delay time (acoustic optimisation
for front passenger seatpositions)
● Equalizer (activation of factoryequalization settings)
● User equalizer (customisedequalization setting)
Change audio settingsThe display indicates the type ofsetting, followed by the adjustmentvalue.Adjust values with button _ or 6.Changes are saved and menus areexited automatically after a briefperiod.
Bass and trebleSelect Bass or Treble.Adjust the values with _ or 6.
Volume distribution between right -leftSelect Balance.Adjust the value with _ or 6.
Volume distribution between front -rearSelect Fader.Adjust the value with _ or 6.
LoudnessSelect Loudness.Choose ON or OFF using _ or 6.
Delay timeSelect Delay time and choose from:● Driver left● Driver right● Front● OFF
Choose the desired setting using_ or 6.
EqualizerSelect EQ and choose from:● Classic● Jazz● Rock● USER
Choose the desired setting using_ or 6.
User EqualizerSelect USER from the Equalizermenu.Press and hold the MENU button untilEQ appears on the display and thefirst value flashes.Adjust the value with R or S.Switch to previous/next value using_ or 6.Press the AUDIO button to memorisethe setting and exit the menu.
Volume settingsRadio with CD player:Turn the ON/OFF rotary knob on theInfotainment system to adjust thevolume for the CD and radio modes.The current volume level is shown onthe display.
Traffic announcements (TA)With the TA function activated (shownon the display) 3 27, it is possible toreceive traffic information at a pre-defined minimum volume even withthe radio volume off.
20 Introduction
The volume with which the trafficannouncement is transmitted variesdepending on the listening volume:● If the listening volume is below a
fixed level during a trafficannouncement, it will beincreased to the fixed level for theduration of the announcement
● If the listening volume is above afixed level during a trafficannouncement, it will bedelivered at the current level +1for the duration of theannouncement
During a traffic announcement,temporarily adjust the volume level byturning the ON/OFF rotary knob.If the volume is adjusted during atraffic announcement, the newvolume level (shown on the display)will only be kept at this level while theannouncement is in progress. Thevolume will then revert back to thelevel prior to the announcement.
Emergency announcementsDuring an emergencyannouncement, the volume will beautomatically adjusted in the sameway as the TA function.This function is activatedautomatically and cannot bedeactivated.
Mute / pausePress the ON/OFF rotary knob brieflyto mute/pause.The following will be shown on thedisplay, depending on the audiosource:● Pause: CD player, Media player● Mute: RadioNoteThe audio source cannot bechanged while the current audiosource is on mute / pause.
To switch the mute/pause functionoff, press the ON/OFF rotary knobbriefly again.If the ON/OFF rotary knob is adjustedwhile in mute/pause mode, themute/pause function will beoverridden.
If an emergency / trafficannouncement is broadcast with themute/pause function on, themute/pause function will beoverridden, and will be resumed atthe end of the announcement.
Radio with CD / MP3 player:Turn the rotary knob on theInfotainment system to adjust thevolume for the CD, Radio and Mediaplayer modes. Alternatively, forvehicles equipped with the Handsfreesystem, you may also adjust thevolume level by pressing the < or ]buttons on the steering wheel.
Speed volume adjustmentThe Speed volume adjustmentfunction allows the volume level to beadjusted automatically depending onthe speed of the vehicle, increasing itas the speed increases to maintainthe same balance with the noise levelinside the passenger compartment.
Introduction 21
To activate the function using thebuttons on the Infotainment system,select the following:● MENU: Press● R / S: Scroll up/down to display
the Speed volume function● _ / 6: Press to select one of the
following options:OFF: function deactivatedLow: function activated (lowsetting)High: function activated (highsetting)
Traffic announcements (TA)With the TA function activated (shownon the display) 3 27, it is possible toreceive traffic information at apredefined minimum volume evenwith the radio volume off.
The volume with which the trafficannouncement is transmitteddepends on the reception volume:● If the listening volume is below a
fixed level during a trafficannouncement, it will beincreased to the fixed level for theduration of the announcement
● If the listening volume is above afixed level during a trafficannouncement, it will bedelivered at the current level +1for the duration of theannouncement
To temporarily adjust the volumeduring a traffic announcement, turnthe rotary knob on the Infotainmentsystem. Alternatively, for vehiclesequipped with the Handsfree system,you may also adjust the volume levelby pressing the < or ] buttons on thesteering wheel.If the volume is adjusted during atraffic announcement, the newvolume level (shown on the display)will only be kept at this level while theannouncement is in progress. Thevolume will then revert back to thelevel prior to the announcement.
Emergency announcementsDuring an emergencyannouncement, the volume will beautomatically adjusted in the sameway as the TA function.This function is activatedautomatically and cannot bedeactivated.
Mute / pausePress the MUTE button on theInfotainment system briefly to mute.Alternatively, for vehicles equippedwith the Handsfree system, you mayalso press the à / q button on thesteering wheel.The following display will be shown,depending on the audio source:● Pause: CD or Media player
pause mode● Mute: Radio mute mode
To switch the mute/pause functionoff, press the MUTE or à buttonbriefly again.
22 Introduction
If the volume is adjusted while inmute/pause mode, the mute/pausefunction will be overridden and thevolume will be set to the new levelselected.NoteTo access the other menus of theInfotainment system, the Mute andPause functions must bedeactivated first
If an emergency or trafficannouncement is broadcast with themute/pause function on, the functionwill be temporarily overridden, andwill be resumed at the end of theannouncement.
AUX input volume adjustmentThis function enables you to align thevolume of the AUX source,depending on the portable player, tothe one of the other sources.The volume of the external audiosource connected to the AUX input,can only be operated via the controlson the audio source itself. It is notpossible to adjust the volume via theInfotainment system or the steeringwheel controls.
To activate the AUX input volumefunction, connect your auxiliary audiodevice and ensure that it is turned off.Using the buttons on the Infotainmentsystem or the steering wheel, selectthe following:● Press the MEDIA or SRC/OK
button● Press the R or S buttons to
select the AUX mode on thedisplay
● Turn the auxiliary audio deviceon
● Press the _ or 6 buttons todecrease or increase the volumelevel
An audio source that is connected tothe AUX input can only be operatedvia the controls on the audio sourceitself.
Speech volumeThe fixed phone volume can beadjusted by using the Speechvolume function.
To activate the function using thebuttons on the Infotainment system,select the following:● Press the MENU button● Press the R or S buttons to
select the Speech volume optionon the display
● Press the _ or 6 buttons todecrease or increase the volumelevelIf the _ button is set to 0, thedisplay will show Speech off.
To adjust the preset volume, pressthe < or ] buttons on the steeringwheel or press the R or S buttons onthe Infotainment system.To temporarily adjust the presetvolume of an ongoing call or vocalannouncement in progress, press the< or ] buttons on the steering wheel.At the end of the call/announcement,the volume will return to its originallevel.
Introduction 23
Radio volume maximum limitactivationThis function enables the user toactivate/deactivate the maximumvolume limit when turning the radioon.To activate the function using thebuttons on the Infotainment system,select the following:● Press the MENU button● Press the R or S buttons to
select the Radio on vol. option onthe display
● Press the _ or 6 buttons toactivate/deactivate Radio on vol.– Limit on or Radio on vol. – Limitoff function
Radio on vol. – Limit on:● if the previous volume level is
equal to or higher than the presetmax. value / equal to or lowerthan the preset min. value, theradio will come on at themax./min. volume
● if the volume level is between thepreset min./max. values, theprevious volume will be resumed
Radio on vol. – Limit off:
the radio will come on at the volumelevel it was before switching off
24 Radio
Radio
Usage .......................................... 24Station search .............................. 25Autostore lists .............................. 26Radio data system (RDS) ............ 27
UsageRadio receptionRadio reception may be disrupted bystatic, noise, distortion or loss ofreception due to:● changes in distance from the
transmitter● multi-path reception due to
reflection● shadowing
Control buttons -Radio with CD player:The most important buttons forcontrol of the radio are:● ON/OFF: Power on/off, volume
control, mute/unmute function● SRC: Activate radio● _ or 6: Station search● BAND: Change waveband,
automatic station storing(Autostore)
● AUDIO: Audio menu activationsettings (Bass, treble, balance,fader, loudness)
● Station buttons 1...6: Presetstation buttons
● MENU: Advanced menufunctions (AF switching, trafficinformation, regional mode)3 27
Activating the radioTurn the ON/OFF rotary knob on,then press the SRC button to switchthe audio source to radio.The station previously selected will bereceived.
Selecting the wavebandPress the BAND button repeatedly toselect the desired waveband.The following selected wavebandswill be shown on the display:● AM: displays AM● FM: displayed as either FM1,
FM2 or FMTThe station previously selected in thatwaveband will be received.
Radio 25
Control buttons -Radio with CD / MP3 player:The most important buttons forcontrol of the radio are:● m / ON/OFF: Power on / off● FM: FM waveband selection /
Automatic station storing(Autostore)
● AM: MW waveband selection● MUTE: Volume activation /
deactivation (Mute/pause)● AUDIO: Audio menu activation
settings (Bass, treble, balance,fader, loudness, audio delay,equalizer)
● MENU: AF switching, trafficinformation, regional mode,speed volume, radio off mode,system reset
● _ / 6: Automatic radio stationsearch mode
● R / S: Manual radio stationsearch mode (frequency, stationname, stored station number)
● Station buttons 1...6: Presetstation buttons
Activating the radioPress the ON/OFF button, then pressthe AM or FM buttons to switch theaudio source to radio.The station previously selected will bereceived.
Selecting the wavebandPress the AM or FM buttonsrepeatedly to select the desiredwaveband.The following selected wavebandswill be shown on the display:● AM: displays AM1 or AM2● FM: displays FM1, FM2 or FMA
The station previously selected in thatwaveband will be received.
Station searchAutomatic station search
Radio with CD player:Briefly press button _ or 6 to searchfor the next receivable station in thecurrent waveband.
If no station is found, automaticsearching continues until _ or 6 ispressed again.
Radio with CD / MP3 player:Briefly press button _ or 6 to searchfor the next receivable station in thecurrent waveband.Press and hold the button _ or 6 tosearch for the required frequency.When the button is released, anautomatic search is then made for thenext receivable station and it is playedautomatically.
26 Radio
Manual station search
Radio with CD player:Press the _ or 6 button on theInfotainment system:● Press briefly and repeatedly: to
start a manual search for the nextreceivable station
● Press and hold: to start fastsearching in the requireddirection
● Release: tuning will stop and theInfotainment system display willshow the current stationfrequency
Radio with CD / MP3 player:Press the R or S buttons on theInfotainment system:● Press briefly and repeatedly: to
start a manual search for the nextreceivable station
● Press and hold: to start fastsearching in the requireddirection
● Release: tuning will stop and theInfotainment system display willshow the current stationfrequency
Autostore listsAutostore function
Radio with CD player:The FM waveband is divided intosections: FM1, FM2 and FMT; theFMT reception band being reservedfor stations stored automatically withthe Autostore function.This function allows you to set andrecall radio stations that you havepreviously stored in the FMTfrequency band.
To activate the Autostore function,press and hold the BAND button onthe Infotainment system until youhear the acoustic confirmation signal.The radio will automatically store the6 stations with the strongest signal indecreasing order of intensity in theFMT frequency band.During the automatic storing process,FM Astore will be shown flashing onthe display.Activating the Autostore function willcancel the stations stored previouslyin the FMT frequency band.NoteDepending on signal strength, it ispossible that less than 6 stations willbe stored.
To store an individual station, selectthe waveband (AM, FM1, FM2) andstation then press the desired button1...6 on the Infotainment system, untilan audible signal sounds, confirmingthat the station has been stored to theappropriate button.A total of 6 stations per waveband canbe stored.
Radio 27
To recall a station, select thewaveband then briefly press thedesired station button 1...6.
Radio with CD / MP3 player:The FM waveband is divided intosections: FM1, FM2 and FMA; theFMA reception band being reservedfor stations stored automatically withthe Autostore function.This function allows you to recall radiostations that you have previouslystored in the FMA frequency band.To activate the Autostore function,press and hold the FM button on theInfotainment system until you hearthe acoustic confirmation signal. Withthis function, the radio automaticallystores the 6 stations with thestrongest signal in a decreasing orderin the FMA frequency band.During the automatic storing process,Autostore will be shown flashing onthe display.Activating the Autostore function willcancel the stations stored previouslyin the FMA frequency band.
Manual station storingTo store an individual station, selectthe waveband (AM or FM) andstation, then press the desired button1...6 on the Infotainment system untilan audible signal sounds, confirmingthat the station has been stored to theappropriate button.A total of 6 stations per waveband canbe stored individually.
Recalling a stationSelect the waveband (AM or FM),then briefly press the desired stationbutton 1...6 to recall a stored station.
Radio data system (RDS)Advantages of RDSRDS is an FM station service thathelps you find the desired station andensures its fault-free reception. TheRDS encodes digital informationwhich is transmitted in addition to theFM radio broadcasts, providinginformation such as station name,traffic information and radio text.
With the RDS activated:● the programme name of the
chosen station appears on thedisplay instead of its frequency
● during an automatic stationsearch, the Infotainment systemtunes into RDS stations only
● the Infotainment system alwaystunes into the best receivablebroadcasting frequency of thechosen station, by means of anAlternative Frequency (AF).
RDS functionsIncorporated within the RDS are thefollowing information fields:● AF: Alternative Frequencies● TA: Traffic Announcements● TP: Traffic Programmes● REG: Regional programmes● EON: Enhanced Other Network
Also, integrated into the RDS is anEmergency Alarm Receptionfunction. This function is activatedautomatically and cannot bedeactivated.
28 Radio
Switching RDS on and off
Radio with CD player:To activate the RDS function, use thefollowing buttons on the Infotainmentsystem:1. MENU: Press repeatedly until AF
is shown on the display2. _ / 6: Press to select the AF ON
or AF OFF optionWhen RDS is activated, AF will beshown on the display.
Radio with CD / MP3 player:To activate the RDS function, use thefollowing buttons on the Infotainmentsystem:1. MENU: Press2. R / S: Press until AF Switching is
shown on the display3. _ / 6: Press to select the AF
Switching ON or AF SwitchingOFF option
When RDS is activated, AF will beshown on the display.
Alternative Frequency (AF) modeWith the AF function activated, theradio automatically tunes into thestation with the strongest signalbroadcasting the same programme.While driving, you can continue tolisten to the same station withouthaving to change the frequency whenyou change zones.If the AF Switching function has beenactivated and the radio is not able toreceive the tuned station, the radiowill activate an automatic search,during which FM Search will beshown on the display.The AF Switching function can onlybe activated on the FM waveband.
Traffic Announcements (TA)modeCertain stations within the FMwaveband are enabled to broadcastinformation about traffic conditions.To activate the TA function on theRadio with CD player audio system,use the following buttons on theInfotainment system:
1. MENU: Press repeatedly until AFis shown on the display
2. _ / 6: Press to select the TA ONor TA OFF optionWhen RDS is activated, TA will beshown on the display.
To activate the TA function on theRadio with CD / MP3 player audiosystem, use the following buttons onthe Infotainment system:1. MENU: Press2. R / S: Press until Traffic
information is shown on thedisplay
3. _ / 6: Press to select the Trafficinformation ON or Trafficinformation OFF optionWhen RDS is activated, TA will beshown on the display.
Radio 29
With the TA function activated it ispossible to:● search only RDS stations that
transmit in the FM waveband,enabled to broadcast trafficinformation
● receive traffic informationalthough the CD / Media player isbeing used
● receive traffic information at apredefined minimum volume,even with the radio volume off
With the TA function active and withthe CD / Media player mute/pausemode, the mute/pause function will beoverridden, and automatic tuning to astation enabled to broadcast trafficinformation will commence.The mute/pause function will beresumed at the end of the trafficannouncement.When a traffic announcement occurs,the volume may be higher thannormal. Normal volume will beresumed at the end of the trafficannouncement.
Traffic Programmes (TP) modeThe TP function enables the user tofind only those stations that regularlybroadcast traffic announcements1).When this function is active, TP will beshown on the display.In some countries there are radiostations that do not broadcast trafficinformation even with the TP functionactive.
Regional (REG) modeAt certain times, some RDS stationsbroadcast different programmesregionally on different frequencies.To activate the REG function on theRadio with CD player audio system,use the following buttons on theInfotainment system:1. MENU: Press repeatedly until
REG is shown on the display2. _ / 6: Press to select the REG
ON or REG OFF optionTo activate the Regional function onthe Radio with CD / MP3 player audiosystem, use the following buttons onthe Infotainment system:
1. MENU: Press2. R / S: Press until Regional is
shown on the display3. _ / 6: Press to select the Regional
ON or Regional OFF optionWhen the REG mode is activated,only frequencies of the currentlyreceived RDS station with the sameregional programme are considered.If the REG mode is deactivated, onlyfrequencies of the currently receivedRDS station with different regionalprogrammes are considered.
Enhanced Other Network (EON)modeThe EON function allows the receiverto monitor other networks or stationsfor traffic programmes automatically,and temporarily tune into that station.This function is only operational withthe TA function active.
Emergency Alarm ReceptionIn the RDS mode the radio is set toreceive emergency announcementsin the case of exceptionalcircumstances or events that may
1) Only Radio with CD / MP3 player.
30 Radio
cause general danger (earthquakes,floods, etc.), if they are broadcast bythe station tuned.During an emergencyannouncement the display Alarm willbe shown on the display. When anemergency announcement occurs,the volume may be higher thannormal. Normal volume will beresumed at the end of the emergencyannouncement.This function is activatedautomatically and cannot bedeactivated.
CD Player 31
CD Player
General information ..................... 31Usage .......................................... 32
General informationThe Infotainment system's CD playercan playback audio CDs.Radio with CD / MP3 player only: TheCD player can also playback MP3CDs.
Important information about audioCDs and MP3 CDs
Caution
Under no circumstances placeDVDs, single-CDs with a diameterof 8 cm or shaped CDs in the audioplayer.You must not put any stickers onCDs. These discs can get jammedin the CD drive and ruin the drive.An expensive replacement of thedevice will then be necessary.
The following CD formats can beused:● CD-ROM (Radio with CD player).● CD-ROM, CD-R and CD-RW
(Radio with CD / MP3 player).
The following sampling frequenciesfor MP3 CDs can be played(Radio with CD / MP3 player only):● 44.1 kHz, stereo (96 - 320 kbps)● 22.05 kHz, mono or stereo
(32 - 80 kbps)● Variable bit-rates (VBR)
CD-Rs and CD-RWs used must beburned in compliance with thespecification ISO9660.● Audio CDs with copy protection,
which are not in compliance withthe audio CD standard, may notplay correctly or not at all.
● On mixed mode CDs(combinations of audio and data,e.g. MP3), only the MP3 audiotracks will be detected andplayed.
● Self-recorded CD-Rs and CD-RWs are more vulnerable tomishandling than prerecordedCDs. Correct handling,especially in the case of self-recorded CD-Rs and CD-RWs,must be ensured; see below.
● Avoid leaving fingerprints whenyou change CDs.
32 CD Player
● Put CDs back in their sleevesimmediately after removing themfrom the CD player, in order toprotect them from dirt anddamage.
● Dirt and liquids on CDs cansmear the lens of the audioplayer inside the device andcause faults.
● Protect CDs from heat and directsunlight.
The following restrictions apply forMP3 CDs(Radio with CD / MP3 player only):● Only MP3 files can be read.
Other compressed audio fileformats cannot be played.
● If the MP3 files on a CD-R or CD-RW are structured in sub-folders,their structure is compressed to asingle level structure where thesub-folders are taken to the levelof the main folders.
UsageStarting CD playback
Radio with CD player:Switch on the Infotainment systemand push the CD with the printed sideup into the CD slot until it is pulled in:CD playback starts automatically.If there is already a CD in the unit,press the SRC button: CD playback isstarted, and the CD track is resumedfrom same location as it was when itwas stopped.Pressing the SRC button when no CDis loaded, No CD will be shown on thedisplay. While this message isdisplayed, the mute function isactivated automatically. The soundsystem will then resumeautomatically to the radio mode.
Skipping to the next track or previoustrackBriefly press button _ or 6 once orseveral times.
Fast forward or rewindPress and hold button _ or 6 to fastforward or rewind the current audiotrack.
PauseBriefly press the ON/OFF rotary knobto interrupt CD playback. Pause willbe shown on the display.NoteThe audio source cannot bechanged while the current audiosource is on mute / pause.
Press the ON/OFF rotary knob todeactivate.The pause function can also bedeactivated by changing the audiosource.
CD displayWhen a CD is playing, the followinginformation will be shown on thedisplay:● T1 (Track 01): shows the number
of the track on the CD● 0:42: shows the time elapsed
since the start of the track
CD Player 33
Removing a CDPress the d button: The CD ispushed out of the CD slot.If the CD is not removed afterejection, it will be drawn back in againautomatically after a brief period. Thesound system will then resumeautomatically to the radio mode.
Radio with CD / MP3 player:Switch on the Infotainment systemand push the CD with the printed sideup into the CD slot until it is pulled in.When the CD is loaded, CD Readingwill be shown on the display. Whenthe CD information has been read,CD playback will start automatically.If there is already a CD in theInfotainment system, press theMEDIA button on the Infotainmentsystem or the SRC/OK on thesteering wheel: CD playback isresumed from same location as it waswhen it was stopped.
NoteDepending on the data stored on theaudio CD or MP3 CD, differinginformation about the CD and thecurrent music track will be shown onthe display.
Skipping to the next track or previoustrackBriefly press button k or l once orseveral times.
Selecting an album or track - MP3 CDPress button R or S to select albums/folders etc.Press button k or l to select a trackfrom the albums/folders etc.
Fast forward or rewindPress and hold button k or l to fastforward or rewind the current audiotrack.
Mute / PauseBriefly press the MUTE button tointerrupt CD playback. Pause will beshown on the display.Press the MUTE button again todeactivate.
CD displayWhen a CD is playing, the followinginformation will be shown on thedisplay when the appropriate menufunction is selected:● CD Track 5 (Track 05): shows the
number of the track on the CD● 0:42: shows the time elapsed
since the start of the track
MP3-CD text information (ID3 tag)The MP3 (ID3-TAG) information(e.g. song title, artist name, albumname etc.) on the CD, can be shownon the display. If there is noID3-TAG information is present, thedisplay will show the file name only.To display the ID3-TAG informationusing the buttons on the Infotainmentsystem, select the following:1. MENU: Press2. R / S: Press until MP3 display is
shown on the display3. _ / 6: Press to select one of the 5
following options:● Folder name● File name
34 CD Player
● Title● Author● Album
Removing a CDPress the d button: The CD ispushed out of the CD slot.If the CD is not removed afterejection, it will be drawn back in againautomatically after a brief period.
AUX input 35
AUX input
General information ..................... 35Usage .......................................... 35
General informationRadio with CD / MP3 player
In the centre console there is an AUXsocket for the connection of externalaudio sources.NoteThe socket must always be keptclean and dry.
It is possible, e.g. to connect aportable CD player with a 3.5 mm jackplug to the AUX input.
UsagePress the MEDIA button repeatedlyon the Infotainment system toactivate the AUX mode, then switchon the external audio device.
Caution
Before connecting ordisconnecting an auxiliary device,e.g. a portable CD player, switchoff the player and the Infotainmentsystem, to avoid sound qualityissues and possible damage to theequipment.
An audio source that is connected tothe AUX input can only be operatedvia the controls on the audio sourceitself. It is not possible to change thetrack, folder or playlist with theInfotainment system controls.The artist or track name are notshown on the display.Upon connection via the jack plug, thesystem detects the audio sourceautomatically. Depending on the
USB port 37
USB port
General information ..................... 37Playing saved audio files ............. 38
General informationRadio with CD / MP3 player
A USB port is available for theconnection of external audio sources.NoteThe socket must always be keptclean and dry.
An MP3 player, USB device or aniPod can be connected to the USBport.A connected external audio deviceallows you to play digital audio thatbelongs to a certain category, e.g. byartist or music genre.
If the USB device contains a lot offiles, creating the library may take afew minutes.USB devices are operated via thefollowing:● Display menus● Steering wheel controls 3 8● Voice commands 3 42
After connecting a USB audio device,press the MEDIA button to switchaudio source to Media player.The display will show specificmessages to notify you that thesystem is being used by an externalaudio device connected via USB.
Important informationThe MP3 players and USB drivesconnected must comply with the USBMass Storage Class specification(USB MSC).Only MP3 players and USB driveswith a cluster size smaller or equal to64 kb in the FAT16/FAT32 file systemare supported.Hard disk drives (HDD) and are notsupported.
38 USB port
External audio devices and USBdrivesThe USB port supports the followingaudio formats:● WMA: Supports WMA version 1
and WMA version 2 standards.● MP3: MPEG-1 Layer 3 - sampling
frequencies 32 kHz, 44.1 kHzand 48 kHz.MPEG-2 layer 3 - samplingfrequencies 16 kHz, 22.05 kHzand 24 kHz.Supported bit rates: 16 kbps,32 kbps, 64 kbps, 96 kbps,128 kbps and 192 kbps.MP2.5 extension (samplingfrequencies 8 kHz, 11.025 kHzand 12 kHz) is also supported.
● WAV: Digital audio formatwithout compression.
● AAC / MP4 / M4A: Samplingfrequencies between 22.05 kHzand 48 kHz.Supported bit rates: 8 kbps to529 kbps.
MP3, WMA, MP4, M4A and AACformats include multimediainformation, whilst WAV files do not.Among the recognised formats, it maybe the case that multimediainformation has not been entered inan audio file that allows it. In thesecases, you can only scroll throughaudio files by folder.USB devices with a passwordfunction are not recommended. Ifyour USB device has this function,always check that it has beendeactivated.The Media player only supports thespecified formats and does notsupport DRM (Digital RightsManagement) protected audio files. Ifthere are unsupported audio files onthe USB device, they will be ignored.The media payer is compatible withmost USB 1.0, 1.1 or 2.0 data storagedevices.The Media player supports playlistextensions, .m3u and .wpl. TheMedia player does not support nestedor connected playlists. Both relativeand absolute paths to songs in theplaylists are supported.
Playlists generated by an iPod are notsupported.
iPod optimizationTo optimise the connection of youriPod with the Infotainment systemyou should carry out the followingsimple operations on your iPod:● Configure the iPod for use as an
external disc. Refer to the iPoduser manual
● If the configuration has beenmade on an Apple computer,configure it on a Windowspersonal computer
● Save the music tracks as audiofiles compatible with theInfotainment system
These operations will notcompromise the sound quality orusability of the iPod tracks.
Playing saved audio filesThe Media player detects when aUSB audio device is connected to theUSB port and a library is created anddisplayed automatically after theignition is switched on.
USB port 39
The Media player has only onelibrary. When a new USB device isinserted a new library is created,replacing the existing one.Once connected, it is only possible touse the steering wheel controls,Infotainment system controls andvoice commands to operate theexternal audio device.Infotainment controls 3 8.Steering wheel controls 3 8.Voice recognition system 3 42.
Display screen operationScroll through menu options on thedisplay and confirm selections usingthe buttons on the steering wheelcontrols:● Press R or S to scroll through
display menu options.● Press SRC/OK to confirm
selections.Changes are saved and menus areexited automatically after a briefperiod.
Start playbackTo switch audio source to Mediaplayer:● Press the MEDIA button on the
Infotainment system.- or -
● Press button SRC/OK repeatedlyon the steering wheel controls.
When the Media player is active,playback is started automatically aslong as Auto play is switched on.NoteIt is recommended that the Auto playfunction is switched on, so that audiotracks are played automaticallywhen the ignition is switched on.
If Auto play is switched off, it ispossible to start playback using Voicerecognition:1. Press s and wait for the audible
signal.2. Say "Play".
Voice recognition system 3 42.
Select next / previous trackTo select the next / previous trackwhile a track is playing on the Mediaplayer:● Press button R or S on the
steering wheel.- or -
● Press button _ or 6 on theInfotainment system.
Adjust the volumeTo adjust the volume of the Mediaplayer:Press < or ] on the steering wheelcontrols.
Pause / unpauseTo pause the Media player:● Press button à / q on the
steering wheel- or -
● Press button MUTE on theInfotainment system.
40 USB port
To unpause the Media player:● Press button à / q again
- or -● Press button MUTE again.NoteThe audio source cannot bechanged while the current audiosource is on mute / pause.
Play tracks in a random orderTo temporarily play all tracks in arandom order:1. Press  / MENU.2. Select MEDIA PLAYER and press
SRC/OK.3. Select Random and press
SRC/OK.
Select a category (e.g. artists,albums, genres)To select and play all tracks in aparticular category:1. Press  / MENU.2. Select MEDIA PLAYER and press
SRC/OK.
3. Using R or S select from one ofthe following category:ARTISTSALBUMSGENRESPLAYLISTSFOLDERS
4. Press SRC/OK to confirm theselection.
5. Scroll through the optionsavailable in the chosen categoryusing R or S and select PLAYALL.- or -Scroll through the optionsavailable in the chosen categoryusing R or S and select aparticular track/album etc.
6. Press SRC/OK to start playback.
Media player settingsThe following list of default Mediaplayer settings can be set:● SHUFFLE.● Loop.● AUTOPLAY.
Random playTo set the Media player to play alltracks in a random order by default:1. Press  / MENU.2. Select MEDIA PLAYER and press
SRC/OK.3. Select SETTINGS and press
SRC/OK.4. Select SHUFFLE and press
SRC/OK.5. Select ON or OFF.
Repeat playTo set the Media player to play tracksin a continual loop by default:1. Press  / MENU.2. Select MEDIA PLAYER and press
SRC/OK.3. Select SETTINGS and press
SRC/OK.4. Select Loop and press SRC/OK.5. Select ON or OFF.
USB port 41
AutoplayTo set the Media player to play tracksautomatically when the ignition isswitched on:1. Press  / MENU.2. Select MEDIA PLAYER and press
SRC/OK.3. Select SETTINGS and press
SRC/OK.4. Select AUTOPLAY and press
SRC/OK.5. Select ON or OFF.
MP3 DisplayTo change the category used for theMP3 display:1. Press  / MENU.2. Select MP3 Display using button
R or S.3. Select from the following options
using button R or S:● File name● Title● Author● Album● Folder name
Disconnecting from USB socketPlayback is stopped immediatelywhen the external audio device iswithdrawn from the USB socket.
42 Voice recognition
Voice recognition
Voice recognition ......................... 42
Voice recognition
General informationVoice recognition allows you tooperate certain functions of a pairedBluetooth mobile phone using aseries of programmed voicecommands.After pairing a Bluetooth mobilephone and copying phonebookcontacts to the Handsfree system,Voice recognition enables you to e.g.call a contact without manuallyselecting the caller name or number.Pairing a mobile phone 3 52.It is also possible to operate the SMSMessage reader and the Mediaplayer (CD or USB device) andchange various settings using voicecommands.Message reader 3 54.CD player 3 31.USB audio device 3 37.
To ensure that conversations insidethe vehicle do not lead tounintentional triggering of systemfunctions, Voice recognition does notstart until it has been activated.
Activating Voice recognitionTo activate the Voice recognitionsystem:Press s on the steering wheel.Activation is confirmed by an audiblesignal.
Deactivating Voice recognitionTo deactivate the Voice recognitionsystem:● Say "Cancel", or● Press à / q, or● Do not say a voice command
after activating the system.Deactivation is confirmed by anaudible signal.
Voice recognition 43
Using Voice recognitionAfter activating Voice recognition withbutton s, a system message will askyou to say a voice command or say"Help", to list the voice commandscurrently available.Following a system message, say avoice command within a few secondsor the system will automaticallydeactivate.To interrupt a system message at anytime, press button s and say a newvoice command.When the system recognises a voicecommand, it will either perform thefunction or ask you to confirm yourchoice:● Say "Yes", or● Say "No".
If the system fails to recognise a voicecommand, it will ask you to try againor say "Help".The system will deactivateautomatically if no recognised voicecommand is given.
Frequently used voice commandsThe following voice commands areavailable at all times:● "Help" (activates the help
function, providing a list ofavailable commands)
● "Cancel" (cancels current voiceinteraction and deactivates Voicerecognition system)
● "Repeat" (repeats the last systemmessage)
HelpThe full list of currently available voicecommands can be accessed at anytime by pressing button s and saying"Help", or by saying "Help" after anysystem message.The system will playback a voicemessage listing the voice commandscurrently available.
Menu levelsThe list of available voice commandsdepends upon the current menu.Voice commands are structured intomenu levels:
When a valid level 1 voice commandis received (e.g. "SETTINGS"), thesystem is then able to recogniselevel 2 voice commands.When a valid level 2 voice commandis received (e.g. "User data"), thesystem is then able to recogniselevel 3 voice commands (e.g. "Deleteusers").
Adjusting the volumeTo temporarily adjust the volume of asystem message:Press < or ] on the steering wheelcontrols.To set the default volume for Voicerecognition, refer to Speech volumein the Volume settings section 3 19.
44 Voice recognition
Voice commandsNoteWhen the vehicle is stationary, allvoice commands are availablewithin the current menu.While driving, the list of availablevoice commands is reduced, forsafety reasons.If the SETTINGS menu is activatedduring driving, it can only beoperated using voice commands.
Phone voice commandsTo access the phone voicecommands menu:1. Press s and wait for the audible
signal.2. Say "Telephone".
The following list of recognised voicecommands can then be used:● Call● Dial● Redial● Call back
To call a phonebook contact:1. Press s and say "Telephone".2. Say "Call".3. Say the contact name, e.g.
"Mark".4. If prompted by a system
message, specify "Work","Home", "Mobile" or "Other".
5. A system message will ask you toconfirm your choice.Say "Yes" to confirm or say "No"to cancel the operation.
6. Say "Call" to start the diallingprocess.
If the specific phone number for thecontact is not recognised, the systemwill display a suggestion. Say "Next"or "Previous" to show other phonenumbers for this contact.When the correct phone number isshown on the display, say "Call" tostart the dialling process.
To dial a phone number:1. Press s and say "Telephone".2. Say "Dial".
3. After the system message, enterthe desired phone number usingthe following voice commands:● Say "Zero" (inserts the
numeral 0).● Say "One" through to "Nine"
(inserts numerals 1 - 9).● Say "Plus" (inserts the +
symbol).● Say "Star" (inserts the *
symbol).● Say "Hash" (inserts the #
symbol).4. The phone number is repeated by
the system and also shown on thedisplay.(Say "Repeat" to repeat thetelephone number entered andrecognised by the Handsfreesystem).
5. Check the phone number enteredis correct and modify it ifnecessary.(Say "DELETE" to delete the lastdigits entered).
6. Say "Dial" to start the diallingprocess.
Voice recognition 45
To dial an international phonenumber, enter the internationaldialling code first, e.g. +44 for UK:● Say "Plus" (+), or● Say "Zero Zero" (00) followed by
the international dialling code.
To redial the last dialled telephonenumber:1. Press s and say "Telephone".2. Say "Redial".3. A system message will ask you to
confirm your choice.Say "Yes" to confirm and start thedialling process or say "No" tocancel the operation.
To call back the last receivedtelephone number:1. Press s and say "Telephone".2. Say "Call".3. A system message will ask you to
confirm your choice.Say "Yes" to confirm and start thedialling process or say "No" tocancel the operation.
For further information on Phonefunctions, refer to Operation in thePhone section 3 54.
Message reader voice commandsWhen the Handsfree system signalsthe arrival of a new text message, thesystem can read out the message:● Say "Yes" to read the message.
- or -● Say "No" to ignore the message
and save it in the Inbox.The Message reader must beswitched on to receive anynotification of an incoming textmessage (see SIGNAL TYPE menuoptions below).To access the Message reader voicecommands menu:1. Press s and wait for the audible
signal.2. Say "MESSAGE READER".
The following list of recognised voicecommands can then be used:● Read last one● INBOX
● Delete all● SIGNAL TYPE● Exit
To read the last received textmessage:1. Press s and say "MESSAGE
READER".2. Say "Read last one".
The voice recognition system isdeactivated automatically after themessage is read and the textmessage remains in the Inbox.
To access the text messages in theInbox:1. Press s and say "MESSAGE
READER".2. Say "INBOX" to access the text
message Inbox. The system willdisplay the first message in theInbox.
3. Say "Next" to move to the nextmessage.Say "Previous" to move to theprevious message.
4. Say "Read" to read the currentlyselected text message.
46 Voice recognition
Say "Re-read" to repeat thecurrently selected text message.Say "Call" to dial the sender of thecurrently selected text message.Say "DELETE" to delete thecurrently selected text message.
To delete all text messages:1. Press s and say "MESSAGE
READER".2. Say "Delete all" to delete all of the
messages in the Inbox.3. A system message will ask you to
confirm your choice.Say "Yes" to confirm or say "No"to cancel the operation.
To change how you are notified of anincoming text message:1. Press s and say "MESSAGE
READER".2. Say "SIGNAL TYPE" to access
the following notification options:3. Say "Reader off" to deactivate the
SMS Message reader. When anew SMS text message arrives onyour mobile phone, you will not benotified by the Handsfree system.
orSay "Visual and acoustic signal".The Handsfree system signals thearrival of a new text message viathe display and with an acousticsignal.orSay "Visual signal only". Thearrival of a new text message issignalled via the display only.
To exit the SMS text Message reader:Press s and say "Exit".For further information on Messagereader functions, refer to Operation inthe Phone section 3 54.
Media player voice commandsTo change the audio source to Mediaplayer:1. Press s and wait for the audible
signal.2. Say "Player".
Press button s each time beforesaying any of the followingrecognised voice commands:● Say "Play"
(plays the audio tracks)● Say "Stop"
(stops playing the audio tracks)● Say "Next"
(moves to the next track)● Say "Previous"
(moves to the previous track)● Say "SHUFFLE"
(plays tracks in a random order)Press s and say "SHUFFLE"again to switch function on/off.
● Say "Loop"(plays the same audio trackscontinuously)Press s and say "Loop" again toswitch function on/off.
● Say "FOLDERS"(allows you to select folders andplay all tracks in the folders onyour USB device)
Voice recognition 47
● Say "ARTISTS"(allows you to select a particularartist and play all tracks andalbums by the artist)
● Say "GENRES"(allows you to select a genre andplay all tracks in a particulargenre)
● Say "ALBUMS"(allows you to select albums andplay all tracks in a particularalbum)
● Say "PLAYLISTS"(allows you to select a playlistand play all tracks in a particularplaylist)
● Say "AUTOPLAY"(automatically plays audio trackswhen a USB drive is inserted)Press s and say "AUTOPLAY"again to switch function on/off.
For further information on Mediaplayer functions, refer to Playingsaved audio files in the USB portsection 3 38.
Settings voice commandsTo access the Settings voicecommands menu:1. Press s and wait for the audible
signal.2. Say "SETTINGS".
The following list of recognised voicecommands can then be used:● User data● PAIRING● Advanced features● Exit
To access and change user data:To remove mobile phones from theHandsfree system:1. Press s and say "SETTINGS".2. Say "User data".3. Say "Delete users".4. A system message will ask you to
confirm your choice.Say "Yes" to confirm or say "No"to cancel the operation.
To remove the contacts from theHandsfree system phonebook:1. Press s and say "SETTINGS".2. Say "User data".3. Say "Delete phonebook".4. A system message will ask you to
confirm your choice.Say "Yes" to confirm or say "No"to cancel the operation.
To transfer contacts from the phoneto the Handsfree system:If contacts were not copied to theHandsfree system during the pairingprocedure, it is possible to transfercontacts at a later date.1. Press s and say "SETTINGS".2. Say "User data".3. Say "Add contacts".
To remove all mobile phones,contacts and data:1. Press s and say "SETTINGS".2. Say "User data".3. Say "Delete all".4. A system message will ask you to
confirm your choice.
48 Voice recognition
Say "Yes" to confirm or say "No"to cancel the operation.
To pair a mobile phone to theHandsfree system:To use the Handsfree phone system,the mobile phone must first be pairedto the vehicle via Bluetooth 3 52.To activate the phone pairingprocedure using voice commands:1. Press s and say "SETTINGS".2. Say "PAIRING".3. The PIN number is shown on the
vehicle display. Enter the PINnumber on your mobile phonekeypad.Connecting is shown in thedisplay.
NoteIf the PIN number is not enteredwithin a few minutes, the operationis automatically cancelled.4. When pairing is complete, the
system will ask if you want to copythe mobile phone contacts to theHandsfree system.
Say "Yes" to confirm or say "No" ifyou do not wish to copy thecontacts.
Caution
Pairing a mobile phone shouldonly be carried out while thevehicle is stationary.
Refer to Bluetooth connection sectionfor further information 3 52.
To access the Advanced features:The Handsfree system identificationcode and GPRS code for mobilephones can be accessed via theadvanced features menu.To access the Handsfree systemidentification code:1. Press s and say "SETTINGS".2. Say "Advanced features".3. Say "System code".
The 8-digit identification code isshown on the display.To access the GPRS code:1. Press s and say "SETTINGS".2. Say "Advanced features".
3. Say "GPRS code".The GPRS code is shown on thedisplay.
4. Say "Preset" to keep the existingcode.orSay "Disable" to disable theGPRS code.orPress s and say "Cancel" tocancel the voice interaction.
To exit the Settings menu:Press s say "Exit".
Helpful hints for voice commands● The vehicle's microphone is
intended for use by the driver.The microphone is correctlypositioned and directed for thispurpose, so that you do not needto alter your normal drivingposition for your voicecommands to be recognised bythe system.If you speak too far from thevehicle's microphone, e.g., if youare sitting in the rear seats, the
Voice recognition 49
system may not recognise yourvoice command.
● Background noise and loudexternal noises can also causevoice commands to bemisunderstood. It may benecessary to close all windowsand sunroof, switch off the airconditioning and request thatpassengers do not speak whilstyou deliver your voice command.
● After activating the Voicerecognition system, always waitfor the audible signal beforespeaking, otherwise the systemwill only register part of the voicecommand and will not recogniseit.
● If the system does not recognisethe voice command, a messageasks you to repeat it. If the voicecommand is still not recognised,the list of recorded voicecommands is played back.Repeat the desired voicecommand when it is played back.In the event the system still doesnot recognise the voicecommand, the Voice recognition
system is automaticallydeactivated.
● If no voice command is givenwithin a few seconds of activatingVoice recognition, the system willautomatically deactivate.
Important notes on languagesupport● Voice commands are
programmed to be recognised bythe system in a particularlanguage. However, the systemdoes not need to identify a uniquevoice, therefore voice commandscan be recognised regardless ofthe person speaking.
● The system is able to recognisevoice commands in differentlanguages, but will onlyrecognise voice commandsbased on the language currentlyset.
● Languages selectable for theVoice recognition systeminclude:
English, German, French, Italian,Portuguese, Spanish, Dutch,Polish and Turkish.To change the language of theHandsfree system (includingVoice recognition), refer to thevehicle Owner's Manual orconsult your Opel ServicePartner.
50 Phone
Phone
General information ..................... 50Connection ................................... 51Bluetooth connection ................... 52Emergency call ............................ 54Operation ..................................... 54Mobile phones and CB radioequipment .................................... 61
General informationThe Handsfree phone system, basedon Windows Mobile technology, is apersonal telematic system whichallows the use of communication andentertainment devices, speciallydesigned for use in vehicles.The system provides you with thepossibility of having mobile phoneconversations via the vehicle'smicrophone and loudspeakers, aswell as operating the most importantmobile phone functions via thesteering wheel control buttons or byvoice interaction with the Infotainmentsystem.To be able to use the Handsfreephone system, the mobile phonemust be connected to the system viaBluetooth 3 52.NoteNot all Handsfree phone systemfunctions are supported by everymobile phone. The possible phonefunctions depend on the relevantmobile phone and network provider.
Refer to the operating instructions inyour mobile phone handbook orconsult your network provider.
Important information foroperation and traffic safety
9 Warning
Use of the handsfree phonesystem while driving can bedangerous as your concentrationis reduced when telephoning. Parkthe vehicle before using thehandsfree phone system.Follow the regulations of thecountry in which you are driving.Also follow the special regulationsthat apply in specific areas andalways switch off the mobilephone if the use of mobile phonesis prohibited, if interference iscaused by the mobile phone or ifdangerous situations can occur.
Phone 51
9 Warning
Mobile phones have effects onyour environment. For this reason,safety regulations have beenprepared which you should makeyourself familiar with before youuse the telephone.
BluetoothThe Phone portal is certified by theBluetooth Special Interest Group(SIG).You will find further information aboutthe specification on the Internet athttp://www.bluetooth.com
SMS (Short Message Service)By means of voice synthesistechnology, the Infotainmentsystem's integrated SMS Messagereader 3 54 can read incoming textmessages on your Bluetooth mobilephone over the vehicle's soundsystem.The SMS Message reader functionsare managed using the steeringwheel controls or voice commands.
Not all mobile phones support thevoice reading of SMS messages.Refer to the operating instructions inyour mobile phone handbook orconsult your network provider.
ConnectionA mobile phone must be connected tothe Handsfree phone system in orderto control its functions via theInfotainment system.No phone can be connected to thesystem unless it has first been paired.Refer to the Bluetooth connectionsection (3 52) for pairing a mobilephone to the Handsfree phonesystem via Bluetooth.When the ignition is switched to theMAR position, the Handsfree phonesystem searches for paired phones inthe vicinity. Bluetooth must beactivated on the mobile phone for thephone to be recognised by theHandsfree phone system. Searchingcontinues until a paired phone isfound.
The display message Connecting,indicates that the phone beingconnected. A confirmation of theconnection on the display, showsdetails of the paired mobile phone.NoteWhen a Bluetooth connection isactive, using the handsfree phonesystem will discharge the mobilephone battery more rapidly.
Automatic connectionFor your phone to connectautomatically when the system isswitched on, it may be necessary toactivate the automatic Bluetoothconnection function on your mobilephone. Refer to the mobile phoneoperating instructions.If connection fails:● check the phone is switched on● check the phone battery is not flat● check if the phone has already
been paired
52 Phone
The Bluetooth function on the mobilephone and on the Handsfree phonesystem must be active and the mobilephone must be configured to acceptthe system connection request.
Bluetooth connectionBluetooth is a radio standard for thewireless connection of, e.g., a mobilephone with other devices.Compatible mobile phones enablethe user to make and receive callsand listen to voice messages usingthe steering wheel controls or byvoice interaction. Information such asmobile phone contact lists and calllists can be transferred to theInfotainment system's memory andshown on the display.NoteThe functionality may be restricteddepending on the phone make andmodel.
Pairing a mobile phone to theHandsfree phone systemNoteBefore pairing a mobile phone, addcontacts to the mobile phonebook soyou can call them using thehandsfree system.
In order to use your Handsfree phonesystem, a connection must be set upbetween the mobile phone and thesystem via Bluetooth, i.e., the mobilephone must be paired to the vehiclebefore using it. For this purpose, themobile phone must supportBluetooth. Refer to the operatinginstructions for your mobile phone.To set up a Bluetooth connection, theHandsfree phone system must beswitched on and Bluetooth must beactivated on the mobile phone.To pair a mobile phone, use thefollowing controls on the steeringwheel:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. SETTINGS: Select option
4. SRC/OK: Press to confirm yourselection
5. R / S: Press to move up/down onthe display
6. PAIRING: Select option7. SRC/OK: Press to confirm your
selectionThe display will show Connectingwhile the system searches foravailable devices via Bluetooth.If the your mobile phone has beenfound by the Handsfree system, a4-digit PIN number will be shown onthe display.Enter the PIN number on your mobilephone keypad and you will receive aconfirmation on the display showingdetails of the mobile phone that hasbeen successfully paired.NoteThe PIN number used for pairing amobile phone is produced randomlyby the Infotainment system eachtime a new phone is paired,therefore you do not need toremember it. If you lose it, you canstill use the handsfree system.
Phone 53
NoteIf the PIN number is not enteredwithin a few minutes, the operationis automatically cancelled.
The pairing procedure can also beactivated with the voice recognitionsystem 3 42.NoteIf another phone is automaticallyconnected during a new pairingprocedure, it will automatically bedisconnected, to allow the newpairing procedure to continue.NoteTo interrupt the pairing procedure atany time, press the à / q button onthe steering wheel. An errormessage will appear in the displayconfirming that pairing was notsuccessful.
The first time a mobile phone ispaired, the system gives a welcomemessage as soon as it is connected.This message will not be given duringsubsequent connection of the samemobile phone.
You only need to pair your phoneonce. After that, the Handsfreesystem will connect automaticallyevery time you turn the ignition key tothe MAR position.NoteThe mobile phone's Bluetoothfunction must be activated, so thatthe Infotainment system willrecognise the phone each time youenter your vehicle and turn theignition key to the MAR position.NoteIf the pairing fails, check to ensurethat the device lists the vehiclephone system.It may be necessary to delete thedevice from the device list and pairas a new device.
When the system has completed thepairing, it will then ask you if you wantto copy across the contacts of thephone you have just paired 3 54.When the pairing is complete, thephone is automatically connected tothe Handsfree phone system. The
mobile phone can then be operatedvia the Infotainment system controlson the steering wheel.
Unpairing a mobile phone fromthe Handsfree phone systemIf the maximum amount of pairedphones have been used, a newphone can only be paired if anexisting phone is unpaired.To unpair a mobile phone, usebuttons on the steering wheel:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. SETTINGS: Select option, then
press the SRC/OK button toconfirm
4. R / S: Press to move up/down onthe display
5. User data: Select option, thenpress the SRC/OK button toconfirm
54 Phone
6. R / S: Press to move up/down onthe display
7. Delete users: Select option, thenpress the SRC/OK button toconfirm
Delete the device from the list ofBluetooth devices on your mobilephone. Refer to the operatinginstructions for your mobile phone.Unpairing a phone erases all of itsdownloaded contacts and its callhistory from the Handsfree system.
Emergency call
9 Warning
Connection setup cannot beguaranteed in all situations. Forthis reason, do not rely exclusivelyon a mobile phone when a vitallyimportant communication (e.g. amedical emergency) is concerned.On some networks, it may benecessary for a valid SIM card tobe properly inserted in the mobilephone.
9 Warning
Bear in mind that you can makeand receive calls with the mobilephone, if it is in a service area witha sufficiently strong signal. Undercertain circumstances emergencycalls cannot be made on all mobilephone networks; it is possible thatthey cannot be made when certainnetwork services and/or telephonefunctions are active. You canenquire about this with the localnetwork operators.The emergency call number candiffer depending on the region andcountry. Please enquirebeforehand about the correctemergency call number for therelevant region.
Making an emergency callDial the emergency call number (e.g.112).The telephone connection to theemergency call centre is set up.Answer when the service personnelquestions you about the emergency.
9 Warning
Do not end the call until you arerequested to do so by theemergency call centre.
OperationIntroductionWhen a Bluetooth connection hasbeen set up between your mobilephone and the Handsfree phonesystem, the functions of your mobilephone can be operatedpredominantly via the Infotainmentsystem controls on the steeringwheel.The Handsfree phone system mayalso be operated by using voicecommands 3 42.It is then possible, e.g., to import andupdate the telephone numbers andcontacts stored in your mobile phoneinto the Handsfree phone system.After connection, the mobile phonedata is transmitted to the Handsfreephone system. This can take sometime, depending on phone model.
Phone 55
During this period, operation of themobile phone is possible only to alimited extent.NoteNot every mobile phone supportsthe functions of the handsfree phonesystem. Therefore, deviations fromthe range of functions described arepossible.
Phone controlsThe most important phone controlsare as follows:Controls on the steering wheel:● Â / MENU: Activate phone
menu, confirm selected menuoption, accept call, changephone conversation, selectdisplayed message, reject/endcall 3 19
● SRC/OK: Confirm selected menuoption, transfer phoneconversation from Handsfreesystem to mobile phone and viceversa, select SMS messagedisplayed 3 19
● Ã / q: Deactivate voicerecognition, interrupt a voicemessage/reading of a textmessage, exit phone menu, exitsub-menu and return to previousmenu, exit current selectionwithout saving, deactivate/reactivate microphone duringphone conversation, muteringtone for incoming calls 3 19
● s: Activate voice recognition,interrupt voice message and givenew voice command, repeat lastvoice message played 3 42
● < / ]: Adjust volume 3 19● R / S: Scroll through menu, scroll
through text messages 3 54
Phone settingsSelect the phone settings optionmenu:1. Â / MENU: Press2. R / S: Press to select the
SETTINGS option3. SRC/OK: Press to confirm
When the desired phone settingadjustments have been confirmed,press the à / q button on thesteering wheel to exit the phone menuand save the changes.
Restore default phone settingsDelete all the data and contacts for allpaired phones, and restore theHandsfree system to its originalsettings, by selecting the followingmenu options:1. Â / MENU: Press2. R / S: Press to select the
SETTINGS option, then press theSRC/OK button to confirm
3. Select the User data option, thenpress the SRC/OK button.
4. Select the Delete all option, thenpress the SRC/OK button toconfirm
The question Delete all? will beshown on the display. To delete alldata, confirm by pressing theSRC/OK button to confirm, or cancelby pressing the à / q button.
56 Phone
NoteIt is not possible to delete the userdata for a single mobile phone if it isnot the only one paired with theInfotainment system.
Volume controlThe fixed phone volume can beadjusted by selecting the Speechvolume option, using the buttons onthe Infotainment system 3 19.The Speech volume function allowsyou to:● adjust the preset volume● adjust the phone volume level
during a conversation, whilst thevehicle is in motion.
● temporarily adjust the presetvolume of an ongoing call
● adjust the volume of a vocalannouncement in progress
Phone menuTo display the phone menu items, usebuttons on the steering wheel:1. Â / MENU: Press2. R / S: Press to move up/down on
the display and highlight yourdesired option
3. SRC/OK: Press to confirm yourselection
4. Ã / q: Press to exit the phonemenu
Display screen operationThe phone menu options shown onthe display are as follows:● LAST CALLS: lists recent calls,
made or received. The list can bedownloaded from your mobilephone's memory, and is updatedduring Handsfree use.
● PHONEBOOK: allows you toview the numbers in yourphonebook and select one tomake a call. Names in thephonebook are groupedalphabetically.
● MESSAGE READER: allows youto read the last text messagereceived, call the sender of themessage or delete it. You canstore up to 20 text messages in adedicated inbox and listen tothem later, call the sender ordelete them. You can also set thenotification methods for receivedSMS messages.
● SETTINGS: allows you tomanage the names in yourphonebook, pair a new device oraccess the PIN code for theHandsfree system.
Dialling a telephone numberSeveral options are available fordialling telephone numbers. Theseinclude the following:● Calling a contact from the
phonebook● Call the caller or recipient of the
most recent calls● Call the sender or recipient of an
SMS message
Phone 57
Press the  / MENU button on thesteering wheel to display the phonemenu options.Select the an option from thefollowing list to dial a phone number:● LAST CALLS: This option
provides a list of numbersrelating to the most recent phonecalls you have made andreceived. It may contain amaximum of 10 received calls,10 outgoing calls and five missedcalls
● PHONEBOOK: If a copiedphonebook contains more than1000 contact names, the systemmay operate more slowly
● MESSAGE READER: Up to20 text messages can be storedin a dedicated inbox and listenedto at a later date
You are able to access any of theabove options to make a call directly.Select your desired recipient andpress the  / MENU button on thesteering wheel.
The dialling function may also beoperated by using voice commands3 42.
PhonebookThe phonebook contains contact listsavailable only to the current vehicleuser. For reasons of confidentiality,each downloaded contacts list canonly be viewed when thecorresponding phone is connected.After setting up the connection, thecontact list on your mobile phone canbe copied to the Handsfree phonesystem.When asked by the system whetherto copy the contacts list, pressSRC/OK (Yes) or à / q (No) buttonon the steering wheel. Alternatively,say "Yes" or "No" using voicecommands 3 42.After a mobile phone contact list hasbeen copied to the Handsfree phonesystem, every time the phone isconnected, the system's phonebookis updated automatically.
NoteNot all mobile phones copy contactnames in the phonebookautomatically, but have to betransferred manually, using themobile phone keypad. If promptedby the system, carry out thisprocedure following the specificoperating instructions for yourmobile phone.
Dialling a number from thephonebookThe PHONEBOOK option allows youto view all names and phone numbersstored. The names are listedalphabetically.To make a call using either a name ornumber:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. PHONEBOOK: Select option,
then press the SRC/OK button toconfirm
4. R / S: Press to move up/down onthe display and select the desiredname/number
58 Phone
5. Â / MENU: Press to dial6. Ã / q: Press to exit the phone
menuDialling a name or number from thephonebook is also possible using thevoice recognition system s 3 42.
Adding contacts to the phonebookAfter a phone has been paired, theoption to copy the phone contactsautomatically is given by theInfotainment system.Contacts can also be added manuallyto the phonebook at a later date bypressing the  / MENU and selectingthe following display options:● SETTINGS● User data● Add contacts
Deleting phonebook contactsPhone book contacts can be deletedfrom the Handsfree system byselecting the following menu options:1. Â / MENU: Press2. R / S: Press to move up/down on
the display
3. SETTINGS: Select option, thenpress the SRC/OK button toconfirm
4. User data: Select option thenpress the SRC/OK button toconfirm
5. Delete users: Select option thenpress the SRC/OK button toconfirm
The question Delete users? will beshown on the display. To delete alldata, confirm by pressing theSRC/OK button, or cancel bypressing the à / q button.
Last callTo dial a number from the call historylists (e.g. dialled numbers, receivedcalls, missed calls), select thefollowing:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. LAST CALLS: Select option, then
press the SRC/OK button toconfirm
4. R / S: Press to move up/down onthe display and select the desiredcontact
5. Â / MENU: Press to dial6. Ã / q: Press to exit the phone
menu
Receiving callsWhen receiving a call, the followingoptions are available:● Â / MENU: Short press
(Accept an incoming call)● Â / MENU: Long press
(Reject an incoming call)● Ã / q : Short press
(Ignore an incoming call)● Â / MENU: Long press
(End a call)When receiving a call, the callernumber may be shown on the display.If the number is stored in the systemmemory, the name will be displayedinstead. If the number cannot bedisplayed, the message Privatenumber will be shown on the display.
Phone 59
NoteThe handsfree phone systemringtone is dependent upon yourmobile phone's personalisedringtones, phone model and mode(silent, vibrate, etc.).
Functions during a telephone callIn addition to volume control, variousfunctions are available during a call:● To put the caller on hold and
disable the microphone, pressthe à / q button on the steeringwheel. To resume the call, pressthe à / q button again.
● The Call alert function informsyou of another incoming call andallows you to answer theincoming call whilst anotherconversation is in progress, andswitch from one call to the other.To answer the incoming call,press the  / MENU button onthe steering wheel. The systemwill switch to the incoming phonecall and will put the current
conversation on hold. Press the / MENU button again to switchfrom caller to caller.
● Switch the call from theHandsfree phone system to themobile phone by pressing theSRC/OK button on the steeringwheel. You can talk on yourmobile and continue to use thesteering wheel controls. Inparticular, if you have more thanone active conversation, you canpress the  / MENU button toswitch from one phone call to theother. Press and hold the  /MENU button briefly to end thecurrent conversation.
SMS (Short Message Service)The Infotainment system's integratedSMS Message reader reads incomingtext messages on your mobile phonewith via Bluetooth over the vehicle'ssound system.It is possible store up to 20 SMSmessages on the Infotainmentsystem, after which when a newmessage is received, the oldestmessage in the inbox will be deleted.
The SMS Message reader is capableof recognising and reading anyabbreviations and interpreting themost common emoticons, e.g."Smiley".The functions of the SMS Messagereader are managed using thesteering wheel controls 3 8 or voicecommands 3 42.NoteNot all mobile phones support thevoice reading of SMS messages orthe automatic transfer of contacts.Refer to the operating instructions inyour mobile phone handbook orconsult your network provider.
The main functions of the SMSMessage reader are as follows:● Alert you of a new incoming text
message on your mobile phonevia Bluetooth, showing the name/number of the sender on thedisplay.It will also suggest reading themessage to you
● Manage the text message inboxon the mobile phone connectedto the Infotainment system
60 Phone
● Re-read messages that havealready been received and saved
● Make a voice call to the sender ofthe text message, by using thesteering wheel controls or voicecommands
● Delete individual text messagesor the entire SMS inbox, usingthe steering wheel controls orvoice commands.
To operate the SMS functions via thesteering wheel controls, select thefollowing options:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. MESSAGE READER: Select
option4. SRC/OK: Press to confirm
Scroll through the followingMESSAGE READER options, thenhighlight the desired option, thenpress the SRC/OK button:● Read last one: Reads the last
message received, call thesender of the message, deletingmessage
● INBOX: Shows receivedmessages, reads savedmessages, displays informationand identity of the sender
● DELETE: Deletes a messageThe system will ask you toDELETE?. Confirm the deletionby pressing the SRC/OK button,or cancel by pressing the à / qbutton.
● Delete all: Deletes all messagesThe system will ask you to Deleteall?. Confirm the deletion bypressing the SRC/OK button, orcancel by pressing the à / qbutton.
Signal typeThe SMS Message reader lets youchoose from three options for thenotification you get when you receivea new text message.To adjust the setting, use thefollowing steering wheel controls:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. MESSAGE READER: Select
option, the press the SRC/OKbutton to confirm
4. R / S: Press to move up/down onthe display
5. SIGNAL TYPE: Select option, thepress the SRC/OK button toconfirm
6. R / S: Scroll through the menuand select one of the followingoptions, then press the SRC/OKbutton to confirm the selection:
Phone 61
● Visual signal only: Shows a newtext message on the display only
● Reader off: Deactivates the SMSMessage reader so you will notbe notified at all when youreceive a new text message
GPRS codeGPRS (General Packet RadioService) provides enhanced datatransfer speeds for mobile phones.To access the GPRS code:1. Â / MENU: Press2. R / S: Press to move up/down on
the display3. SETTINGS: Select option, then
press the SRC/OK button toconfirm
4. R / S: Press to move up/down onthe display
5. Advanced features: Select option,then press the SRC/OK button toconfirm
6. R / S: Press to move up/down onthe display
7. GPRS code: Select option, thenpress the SRC/OK button toconfirmThe code is shown on the display.
The GPRS code can also beaccessed and changed using voicerecognition 3 42.
Mobile phones and CB radioequipmentInstallation instructions andoperating guidelinesThe vehicle specific installationinstructions and the operatingguidelines of the mobile phone andhandsfree manufacturer must beobserved when installing andoperating a mobile telephone. Failureto do so could invalidate the vehicletype approval (EU directive 95/54/EC).
Recommendations for fault-freeoperation:● Professionally installed exterior
antenna to obtain the maximumrange possible,
● Maximum transmission power10 watts,
● Installation of the phone in asuitable spot, consider relevantNote in the Owner's Manualsection Airbag system.
Seek advice on predeterminedinstallation points for the externalantenna or equipment holder andways of using devices with atransmission power exceeding10 watts.Use of a handsfree attachmentwithout external antenna with mobiletelephone standards GSM900/1800/1900 and UMTS is onlypermitted if the maximumtransmission power of the mobiletelephone is 2 watts for GSM 900 or1 watt for the other types.
62 Phone
For reasons of safety, do not use thephone while driving. Even use of ahandsfree set can be a distractionwhile driving.
9 Warning
Operation of radio equipment andmobile telephones which fail tomeet above mentioned mobiletelephone standards is onlypermitted using an antennalocated outside of the vehicle.
Caution
Mobile telephones and radioequipment may lead tomalfunctions in the vehicleelectronics when operated insidethe vehicle with no exteriorantenna, unless the abovementioned regulations areobserved.
64
Index AAdd contacts................................. 54Adjust menu items........................ 14AF Switching................................. 27Alternative frequencies (AF)......... 27AM radio....................................... 24Audio CDs.................................... 31Audio formats............................... 37Audio settings............................... 18Automatic connection................... 51Automatic station search.............. 25Automatic switch-off..................... 14Automatic volume adjustment...... 14Autostore function......................... 26Autostore lists............................... 26AUX input..................................... 35AUX input volume adjustment...... 19
BBalance......................................... 18Bass.............................................. 18Bluetooth.......................... 50, 51, 52Bluetooth connection.................... 52
CCall lists........................................ 54Cancelling voice recognition......... 42CD display.................................... 32CD playback................................. 32CD player...................................... 31Code Card...................................... 6
Connection................................... 51Control elements overview............. 8Controls........................................ 14
DDelay time..................................... 18Delete contacts............................. 54Dialling a telephone number......... 54Display screen
Menus....................................... 14Operation.................................. 54
EEject a CD.................................... 32Emergency Alarm Reception........ 27Emergency announcement
volume....................................... 19Emergency call............................. 54Enhanced other network (EON). . . 27Equalizer....................................... 18
FFader............................................ 18Fast forward or rewind.................. 32FMA........................................ 24, 26FM radio....................................... 24FMT........................................ 24, 26
GGeneral information 4, 31, 35, 37, 50GPRS code............................. 42, 54
65
HHandsfree system......................... 54
Controls..................................... 14System code............................... 6
Handsfree system with multimedia. 4
IInbox............................................. 54Infotainment system
Controls....................................... 8Security code.............................. 6
iPod configuration......................... 37
JJack plug...................................... 35
LLanguage..................................... 14Last calls....................................... 54Loudness...................................... 18
MManual station search.................. 25Manual station storing.................. 26Maximum start-up volume............ 14Media player voice commands..... 42Menus........................................... 14Menus on the display screen........ 14Message reader (SMS).......... 50, 54Mobile phones and CB radio
equipment ................................ 61
Modes of operation....................... 14MP3 CDs...................................... 31MP3-CD text information (ID3 tag) 32MP3 players.................................. 37Mute.............................................. 14Mute/pause function..................... 19
NNotification settings (SMS)........... 54
OOperation...................................... 54
PPairing a mobile phone................. 52Pause..................................... 14, 32Phone........................................... 50Phonebook................................... 54Phone connection......................... 51Phone controls.............................. 54Phone installation instructions...... 61Phone menu................................. 54Phone operating guidelines.......... 61Phone settings.............................. 54Phone voice commands............... 42Phone volume............................... 54Playing saved audio files.............. 38Portable audio players.................. 35
RRadio............................................ 24Radio activation............................ 24Radio blocked................................. 6Radio code..................................... 6Radio control buttons
Radio with CD / MP3 player...... 24Radio with CD player................ 24
Radio data system (RDS) ............ 27Radio on vol. – Limit off................ 19Radio on vol. – Limit on................ 19Radio reception............................ 24Radio volume maximum limit
activation................................... 19Radio with CD /MP3 player
Controls................................. 8, 14Radio with CD player
Controls................................. 8, 14RDS: Switching on and off........... 27Recalling a station........................ 26Receiving calls.............................. 54Regional programmes (REG,
Regional)................................... 27Restore default system settings. . . 14Restoring default phone settings. . 54
SSecurity code.................................. 6Selecting the waveband............... 24Signal type (SMS)......................... 54
66
Skipping to the next track orprevious track............................ 32
SMS Message reader voicecommands................................. 42
SMS (Short Message Service) 50, 54Speech volume....................... 19, 54Speed dependent volume............ 19Station search............................... 25Steering wheel controls.................. 8Switch on/off................................. 14Symbols.......................................... 4System code................................... 6
TTheft-deterrent feature ................... 6Tone settings................................ 18Traffic announcements (TA)......... 27Traffic announcement volume...... 19Traffic programmes (TP).............. 27Traffic safety............................. 4, 50Treble........................................... 18
UUnpairing a mobile phone............ 52Usage......................... 14, 24, 32, 35USB drives.................................... 37USB port....................................... 37User Equalizer.............................. 18Using this manual........................... 4
VVoice commands.......................... 42Voice recognition ......................... 42Volume......................................... 14Volume settings............................ 19
WWarnings and Cautions.................. 4Waveband selection..................... 24
www.opel.com
Copyright by ADAM OPEL AG, Rüsselsheim, Germany.
The information contained in this publication is effective as of the date indicated below. Adam Opel AG reserves the right to make changes to the technical specifications, features anddesign of the vehicles relative to the information in this publication as well as changes to the publication itself.
Edition: May 2015, ADAM OPEL AG, Rüsselsheim.
Printed on chlorine-free bleached paper.
05/2015
*KTA-2731/4-EN*
KTA-2731/4-en