GWO GWO Basic Safety Training (GWO BSTR - Basic Safety Training Refresher)The Global Wind Organisation (GWO) is an association of owners and Wind Turbine manufacturers.The GWO was set up to provide coherent basic safety training and is recognized throughout the industry.

The Basic Safety Training includes 5 Modules First Aid; Manual Handling; Fire Awareness; Working at Heights; Sea Survival (available soon).

Course aimed at Workers operating in the wind industry with GWO training.

Introduction and Objectives Sustain an accident-free work environment in the wind industry; Bring awareness to all employees about the dangers inherent in the practice of their work, as well as knowledge of the applied legislation; Grant workers the knowledge about prevention and safety procedures at work through a set of techniques and methods of good practice; Know how to adapt first responder techniques in an emergency situation; Know and apply individual and collective protection techniques and systems so as to prevent errors and reduce the risk of accidents.

This training is based on the simulation of exercises in a real context, in a controlled space and environment.The GWO training grants technicians who need to carry out tasks in wind turbines with the minimum competencies necessary to accurately and safely carry out the tasks. This training also addresses emergency situations, and the delegates are also prepared to intervene in various emergency situations including wind turbine rescue and evacuation.

AIMS Grant participants the knowledge and skills needed in order to:

• Intervene in emergency situations in Wind Turbines in accordance with the requirements for the Basic Safety Training Refresher in First Aid module (GWO Basic Safety Training Refresher - First Aid).

CONTENTS

Legislation; Anatomy; Lifesaving First Aid A - B - C; Themes; Practice and scenario-based training.

DURATION OF TRAINING8h

VALIDITYCertificate valid for 2 years.

GWOFirst Aid

AIMS

• Carry out Manual Handling activities;• Adopt correct posture and behaviour in Wind Turbines according to the requirements in the Basic Safety Training Manual Handling module (GWO Basic Safety Training - Manual Handling).

CONTENTS Legislation; Risks and hazards; Spinal Anatomy and Posture; Planning lifts; Risk Control and lifting techniques; Behavioural safety; Practice and scenario-based training.

DURATION OF TRAINING 4h

VALIDITYCertificate valid for 2 years.

GWOManual Handling

Intervene in emergency situations in a real context and in accordance with the requirements in the Refresher module - Basic Safety Training in Manual Handling (GWO Basic Safety Training Refresher- Manual Handling).

AIMS Intervene in emergency situations in a real context in accordance with the requirements of the Refresher Module - Basic Safety Training For Fire Awareness (GWO Basic Safety Training Refresher- Fire Awareness).

• Carry out an initial and adequate assessment of the fire;• Safe evacuation of a Wind Turbine;• Efficiently extinguish a fire with first responder equipment in wind turbines according to the requirements in the Basic Safety Training for Fire Awareness module (GWO Basic Safety Training - Fire Awareness).

CONTENTS Legislation;

Fire combustion and fire spread; Fire extinguishing; Fire prevention; Firefighting equipment in a WTG; Practice and scenario-based training.

DURATION OF TRAINING 4h

VALIDITYCertificate valid for 2 years.

GWOFire Awareness

AIMS Intervene in emergency situations in a real context in accordance with the requirements in the Basic Safety Training Working At Heights module (GWO Basic Safety Training - Working at Heights).

• Correct use of the PPE;• Working at Heights safely;• Carry out basic and safe rescues at height in Wind Turbines according to the requirements in the Basic Safety Training Working at Heights Module (GWO Basic Safety Training - Working At Heights).

CONTENTS Review of skills; Theoretical review; Pratical review; Practice and scenario-based training.

DURATION OF TRAINING 8h

VALIDITYCertificate valid for 2 years.

GWOWorking At Heights

All this equipment is available for use during the Basic Safety Training Working At Heights Module (GWO Basic Safety Training - Working at Heights)

HARNESSES SKYLOTEC Rescue Pro 2.0, ARG50 Integral Click, ARG51 Formotion Wind; CRESTO 1135TO, 1135RA; PETZL Avao Bod Fast Crol; SINGING ROCK Profi Worker Standard; CAMP Access Chest+Access Sit; Access Chest+Access Golden Top Seat ALUR1; PSA RKA-UNI; EDELRID VERTIK II CL+TOP 361; FALL SAFE X-Treme TM Spider Combo 2; TRACTEL HT110 Windmill, HT Secours MA XP, HT Easyclimb MAE, HT LadyTrac BMA.

FALL ARRESTERS SKYLOTEC Shockyard Flex V L-0390, Skysafe Pro Flex Y L-0559, BFD SK12 L-0097-2; CRESTO Absor Lanyard 1302-TF, Absor Lanyard 1304-TF; PETZL Absorbica Y MGO L59; EDELRID Scope Arm Giant+SHOCKSTOP PRO; FALL SAFE FS596-CB Double Rope Lanyard Incl. EA W/1 FS826+2 FS821 1,75m; TRACTEL Linga de Segurança com Absorvedor.

VERTICAL FALL ARREST SYSTEM SKYLOTEC HK Retractale System, SKA8-ST Run-B; LATCHWAYS Ladder Latch; HACA Type 0529.7450, 0529.7103, 0529.7201; TRACTEL Travsmart coulisseau s/assembler, Blocfor 20R M46; AVANTI RUNNER System 2000/2002.

POSITIONING LANYARDS SKYLOTEC Ergogrip SK12 L-0030 (EN), Ergogrip SK12 L-0259 (ANSI); CRESTO Stodlina Cresto 2361, Stodlina Cresto 2310; CAMP Rope Adjuster 203101; EDELRID Adjust; FALL SAFE FS079-2M - Xtreme Work Positioning Lanyard Max; TRACTEL LCM04-G.

EVACUATION DEVICES SKYLOTEC Milan 2.0; PSA AG10; CRESTO Red Pro.

RESCUE DEVICES SKYLOTEC Milan HUB, Milan 2.0 Power, Milan 2.0 Rapid Climb; CRESTO Resq DD. HEIGHT; TRACTEL Derope.

GWOEquipments