online catalog en
TRANSCRIPT
Gemological Equipment01 Gemological Equipment01
2 kg calibration weight
PRECIOUS METAL TESTER■ FEATURESNo stains, no scratches, no chemical! Essential for Gold trade, Jewelry shop, Pawn shop, Gold mine and Bank. Easily determine the gold karatand purity by measuring the specific gravity of the sample.1. GKs can check purity to confirm if marked stamp on gold (platinum) is correct or not. Most common type of fake gold: lower purity thanmarked stamp on gold (platinum).2. Gold (platinum) which outside covered real gold (platinum), and inside with other metal can be detected.3. Non„gold (platinum) metals can be distinguished.
■ Precious metals which can not be tested with GKs.1. With hallow 2. With any stones (have to remove them when testing) 3. Materials which have close density to gold (platinum).
Easy operation in 20 Sec.
Item Code 101„003 101„002Product Name Precious Metal Tester GK„2000 Precious Metal Tester GK„300
Measuring Range 0.01 „ 2100 g 0.01 „ 300 g
Mini Necessary Weight 10 g 5 g
DisplayGold : (Lo, K9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24)
Platinum :(Lo, Pt600, 650, 700, 750, 800, 850, 900, 950, 1000)Purity (%), Density
Gold : (Lo, K9, 10, 12, 14, 16, 18, 20, 21, 22, 23, 24)Purity (%), Density
Power Supply AC100 to AC240 V
Weight / Dimensions 5.50 kg / 317 x 210 x 235 mm 1.54 kg / 218 x 190 x 170 mm
Option Printer AD-8121B, 2 kg Calibration weight Printer AD-8121B, Airtight windsheild
Gemological Equipment 02Gemological Equipment 02
GOLD TESTING NEEDLE & STONE■ FEATURES
Traditional Gold testing method by using Gold needle, testing stone,putting acid on it. Compare the color reaction and get to know Gold K.
Item Code 101„004 101„005
Product name Gold Testing Needle & Stone Set Gold Testing Stone
ContentsNeedle 5 pcs (K8, 10, 12, 14, 18)Stone (45 x 40 x 8 mm)
Stone (85 x 54 x 9 mm)
COLOR STONE CHART
■ FEATURES
COLOR STONE CHART could be your great help for selecting,purchasing, and selling color stones with its high quality stone colorpictures which are the closest to actual color as possible. And theindex showed under the each color stone could be also your help tocalculate the market price for references.
Item Code 801„080
Product Name Color Stone Chart
ContentsTotal 15 sheets:
Ruby, Blue sapphire, Emerald, Paraiba tourmaline (0.5, 1.0, 3.0 ct)Jadeite(1.0, 2.0, 5.0 ct)
Accessories Manual, Sheet case
DIAMOND JUDGE CHART■ FEATURES
Just 7 steps following chart and estimate on price of Diamond !Great help when you buy Diamond for beginners to experts,especially for mounted Diamond. These nice pictures are also usedfor Gemological lessens.
Item Code 801„112
Product Name Diamond Judge Chart
Content Chart x 5 sheets(Carat size 0.2 „2.0 ct),Stone frame x 2, Original case,
DIAMOND SELECTOR ■ FEATURES
Very compact size and fit into your pocket or purse. It`s easy to takeDiamond Selector anywhere you go! Simply set the size of the stone,then apply the probe and result will be shown on the display. Itcomes with two AAA batteries and vinyl carrying case. * Moissanitecannot be identified with this product.
Item Code 102„001
Product Name Diamond Selector
Weight / Dimensions 64 g / 85 x 54 x 14 mm
Accessories AAA alkaline battery x 2, Loose stone holder, Vinyl case
PRESIDIUM MULTI TESTER■ FEATURES
The Presidium Multi Tester (PMuT) utilizes a patented combination ofboth thermal and electrical conductivity to distinguish betweendiamond, moissanite, and other simulant.
Item Code 102„002Product Name Multi Tester PMuT
Weight / Dimensions 97 g / 160 x 42 x 22 mm
Accessories Loose stone holder, Case
Battery AAA x 3
Gemological Equipment03 Gemological Equipment03
POLARISCOPE & REFRACTOMETER RM-181■ FEATURESPolariscope: Discerning between single and double refractions andsorting out imitations. Using a polariscope is the first step ingemological discernment.Refractometer: Refractometer is great to go with our Polariscope.Usually, refractometer needs light source but you can use lightsource from the polariscope. Measurements of the refractive indexare the most important test in gemological discernment. Ourrefractometer has top share in Japanese market. It is supplied withpolarizing filter to observe birefringence.
Item Code 103„002 103„003Product Name Polariscope Refractometer RM-181Weight / Dimensions 1 kg / 145 x 90 x 140 mm 520 g / 127 x 43 x 82 mmPower 100 V „Option „ Refractometer liquid 1.81
SPECTROSCOPE (DIRECT VISION) &SPECTROSCOPE (WAVELENGTH SCALE)■ FEATURES
Spectroscopes measure the characteristic spectrum throughprinciple ingredients and coloration elements contained in thegemstone. It is the device to differentiate the type of gem.
Item Code 103„004 103„005
Product Name Spectroscope (Direct) Spectroscope (Wavelength)
Weight / Dimensions 93 g / 89 x 21 x 21 mm 225 g / 104 x 50 x 22 mm
DICHROSCOPE & CHELSEA COLOR FILTER■ FEATURESDichroscope: Useful to identify double refractive colored gemstones.Chelsea Color Filter: Helpful in identifying certain red, blue, andgreen stones. This is used to determine whether the stone is naturalor synthetic. This instrument helps to detect dyes in certain gems,like dyes green and blue chalcedony. Made in England.
Item Code 103„006 104„011Product Name Dichroscope Chelsea Color FilterWeight / Dimensions 21 g / 63 x 15 x 15 mm 15 g
MEGA LIGHT 100■ FEATURESVersatile light source for various optical instruments. Cold lightsystem will not get hot. Low priced, light weight. Suitable forgemologists.
Item Code 104„023Product Name Mega Light 100Lamp Halogen with 100W mirror (Life 1000 hours)Luminance 650,000 LUXColor Temperature 3100 KelvinWeight / Dimensions 1.5 kg / 235 x 76 x 120 mmAccessories Single light guide (500 mm)Option Double light guide (500 mm)
GEMLIGHT (BOX) & GEMLIGHT (STAND)■ FEATURESEquipped with International Standard Illuminant (4800 „ 5200Kelvin). Ideal light source for diamond color grading. Also equippedwith UV light for grading pearls and color stones, and checking thefluorescent reaction.Box and Stand types are available as your usage.* Available in 100V only.
Item Code 104„014 104„015Product Name Gemlight (Box) Gemlight (Stand)
LightingDay light 6 W x 2
Black light 6 W x 1Day light 6 W x 2
Weight / Dimensions 3 kg / 276 x 155 x 245 mm 1.8 kg / 255 x 190 x 300 mmPower 100 V
Gemological Equipment 04Gemological Equipment 04
DUAL WAVE UV LIGHT■ FEATURES
Both long and short waves are available in one unit. Suitable forgemologists.
Item Code 104„001
Product Name Dual Wave UV Light
Wavelength Longwave 365 mm / Shortwave 253 mm
Weight / Dimensions 2.15 kg / 220 x 180 x 110 mm
Power 100 V
UV LIGHT ABL-3Z■ FEATURES
Equipped with 3 bulbs UV LED from NICHIA who is one the topmanufacture of LED in Japan.Strong power of 375nm long wave UV enables you to checkFluorescence and Luminescence of Diamond, Ruby, Alexandriteeasy. Also it can be used to check note, cards, passport as well.
Item Code 104„032
Product Name UV Light ABL-3Z
Wavelength 375 nm
Weight / Dimensions 87 g / φ30 x 100 mm
Battery AAA battery x 3 / 2 hours
UV PENLIGHT■ FEATURES
You can check the UV fluorescent reaction of Diamond, Ruby, andAlexandrite. UV reaction of bill, check, credit card can be seen easilyas well.
Item Code 104„003 104„016Product name UV Penlight UV Penlight Stylus
Wavelength 375 ~ 390 nm 365 nm
Weight / Dimensions 32 g / φ20 x 125 mm 31 g / φ10 x 158 mm
Battery N x 3 / 1 hour AAAA x 3 / 60 hours
Option „ (801„062) AAAABattery 6pcs pack
UV MINI LIGHT■ FEATURES
Key chain UV light has long„wave and makes it easy to checkfluorescence anywhere you go.
Item Code 104„024
Product Name UV Mini Light
Weight / Dimensions 18 g / φ10 x 50 mm
Battery Button battery LR41 x 4
PORTABLE UV LIGHT■ FEATURES
Portable UV / Day Light operates on four AA batter ies.Recommended for checking the fluorescent reaction of diamond andcolored stones.
Item Code 104„002
Product Name Portable UV Light
Weight / Dimensions 85 g / 161 x 54 x 21 mm
Accessories UV light (Longwave), Day light
Gemological Equipment05 Gemological Equipment05
Xenon Light LED Light
TWIN LIGHT (XENON & LED)■ FEATURES
Show the color alteration of alexandrite. Alexandrite is the one ofexpensive color stones, which changes in color, natural alexandritegive off red„violet color under Xenon light, and blue„violet colorunder LED light.
Item Code 104„017
Product Name Twin Light (Xenon & LED)
Bulb Xenon x 1 / LED x 3
Weight / Dimensions 152 g / φ35 x 138 mm
Battery Lithium battery x 2 / Xenon 2.5 hours, LED 28 hours
STREAM LIGHT SCORPION / ATTACHMENT■ FEATURES
It is the most suitable penetrating light to check the colored stones and pearls. Suitable forchecking the pearl luster, star sapphire and cats eye. You can use the attachment as aninstrument for inspecting the pearls and inclusion in jewels such as damaged or enhancesemeralds, and nacreous layer. Also it can be used as a light source for the gemologicalequipment.
Item Code 104„004 104„005 104„006
Product Name Stream Light Scorpion Attachment for Scorpion Scorpion with Attachment
Weight / Dimensions 130 g / φ33 x 130 mm
Battery Lithium battery x 2
LED PENLIGHT (FLOOX) & PENLIGHT MR (SILVER)■ FEATURES
Appropriate brightness for jeweler’s Penlight. Not only forGemstones, but also can be used with color filter or refractometer.
Item Code 104„026 104„025 104„031
Product Name LED Light Floox(Purple) LED Light Floox(Blue) Penlight MR (Silver)
Bulb White LED x 1 Yellow bulb x 1
Battery AAA x 2 / 7 hours AAA x 2
Weight / Dimensions 43 g / φ 14 x 115 mm 38 g /φ 13 x 140 mm
LED LIGHT BOARD■ FEATURES
This Light Board brings natural light color by LED which has a fewflicker and heat. Board face has B4 size big, and smooth surface. Youcan use it for various purposes, for drawing and displaying jewelryand gems.Item Code 104„033Product Name LED Light Board SLT„B4
Power AC100 „ 240 V / 5W
Light source Approx. 2700 lx
Weight / Dimensions 1.4 kg / 304 x 408 x 9.8 mm Working face 267 x 374 mm
Gemological Equipment 06Gemological Equipment 06
MEIJI TECHNO GEM MICROSCOPE■ FEATURESMeiji Techno introduces advanced gem stereo microscope systems.
●Z00M STEREO MICROSCOPE
Item Code 105„001 105„018Model code GEMZ-5TRSVH GEMZ-5TRB/BDH
Magnification 7X„45X (with 10X eyepiece, FN 23 mm)14X„90X (with 20X eyepiece, FN 11.5 mm)
Accessories Eyepiece 10X, 20X, Gem clamp, Eye shields
●COMPACT MICROSCOPE
Item Code 105„006 105„007 105„008Model Number GS-2100 GS-2200 GS-2300Magnification 10X, 20X 10X, 30X 20X, 40XWeight / Dimensions 2.8 kg / 170 x 115 x 270 mmAccessories Eyepiece 10X, Gem clamp, Eye shields, Dustcover
NIKON COMPACT MICROSCOPE■ FEATURES
Halogen Lamp Fieldmicroscope: Compact model with built„inhalogen lamp for quick and easy observat ion using 20Xmagnification. With wide focusing range (50mm) makes it possibleto see object easily. It can be easily adjusted for vision differencesbetween the eye with diopter adjustment ring.Mini Fieldmicroscope: Water resistant model with lightweight areavailable the working place. The focus can be firmly fixed to preventthe accidental shift in focus during observation.
Item Code 105„019 105„020
Product Name NIKON HALOGEN LAMPFIELDMICROSCOPE
NIKON MINIFIELDMICROSCOPE
Magnification 20X (fixed) 20X (fixed)Weight / Dimensions 610 g / (In use) 184„238 (H) x 94 (D) x 100 (W) 395 g / (In use) 156„202 (H) x 89 (D) x 90 (W)Power Source CR123A Lithium battery -
Accessories Soft case, Head unit cover, Strap Soft case, Strap
POCKET MICRO KENBI M780■ FEATURES
Portable Pocket Microscope 30X with light.Suitable for checking metal surface andeasy to focus. Fits into your pocket.Batteries are not included.
Item Code 105„012Product Name Pocket Microscope 30X M780Magnification 30XBattery AA Battery x 2 / 1.5 hourWeight / Dimensions 75 g / 140 x 49 x 22 mm
MICROSTAND SCOPE■ FEATURES
Compact Microscope with precision optics for examine diamond and gemstones. This scopeenables you to read the inscription on loose or mounted stones.
Item Code 105„015 105„016 105„017
Product Name Micro Stand Scope
Model Name KM-412LS-12 KM-616LS-20 KM-820LS-25
Magnification Microscope 12XTelescope 4X
Microscope 20XTelescope 6X
Microscope 25XTelescope 8X
Battery CR2016 x 2 / LED LIGHT 16 hour
Loupes07 Loupes07
LOUPE NIKON 10X TRIPLET■ FEATURES
World`s well-known brand for camera andoptics has now produced this high qualityjeweler`s loupe.Nikon triplet 10X, 13mm diameter loupeprovides edge to edge viewing without anydistortion.
Item Code 106„001
Product Name Loupe Nikon Triplet
Magnification / Focal Length 10X / 25 mm
Lens 13 mm / Triplet
Weight / Dimension 15 g / 42 x 24 x 16 mm
LOUPE NIKON SERIES■ FEATURES
The cost efficient Loupes from Nikon areavailable at 3 different colors (Black, Blue,Red) with different magnification. Thesurface of Loupe has mirror finished andcompletely noble design.
Model number 8D 12D 16D 20D
Black color 106„124 106„127 106„130 106„133
Blue color 106„125 106„128 106„131 106„134
Red color 106„126 106„129 106„132 106„135
Magnification 2X 3X 4X 5X(2X, 3X)
Lens 34.8 mm / Plastic Lens
Weight 20 g 21 g 22 g 28 g
Dimension 54 x 49 x 16(19) mm
LOUPE 10X PRO-DX / PRO-S■ FEATURES
Developed as high-end Jewellry loupe, withhigh class Steinheil Triplet lens. Lens is no-coated and small color difference can bedistinguished.
Item Code 106„094 106„072
Product Name Loupe PRO-DX 10X Loupe PRO-S 10X
Magnification 10X
Lens 18 mm / Triplet (Steinheil)High class photics glass lens (Non-coat)
Resolution More 67 pcs / mm
Accessories Leather case, strap „
JAPANESE HIGH QUALITY LOUPE 6011 SERIESItem Code 106„020 106„021 106„028
Product Name Loupe 6011 Series
Model Number 6011-B 6011-SB 6011-M
Magnification 10X
Lens 18 mm / Triplet
JAPANESE HIGH QUALITY LOUPE 8800 SERIESItem Code 106„023 106„022 106„024
Product Name Loupe 8800 Series
Model Number 8800-S 8800-B 8800-SB
Magnification 10X
Lens 18 mm / Triplet
JAPANESE LOUPE RUPER SERIES■ FEATURES
Reasonable and high quality guaranteed.Distortion free double glass loupes!
Item Code 106„025 106„026 106„027
Product Name Loupe Ruper Series
Model Number Ruper-10 Ruper-20 Ruper-30
Magnification 10X 10X 8X
Lens 15 mm / Double 21 mm / Double 28 mm / Double
JAPANESE LOUPE SINGLES■ FEATURES
Diameter 36 mm wide and easy to use forinspection.4X lens, 2 pcs become 7X and 3pcs become 10X.
Item Code 106„104 106„105 106„106
Product Name NO.7910 NO.7920 NO.7930
Magnification 4X / 1 pcs 7X(4X 2pcs) 10X(4X 3 pcs)
Lens 36 mm / Single
JAPANESE LOUPE LINEN TESTER■ FEATURES
Japanese made Linen Tester is in bigdemand among stone cutting designers allover the world. Easy focusing 1 lens loupe.
Item Code 106„007 106„008 106„009
Product Name Linen Tester
Model Number A10-2 A20-2 A30-2
Magnification 10X 8X 6X
Weight / Dimensions 15 g / 10 x 10 mm 27 g / 15 x 15 mm 42 g / 25 x 25 mm
LED FLASH LOUPE R7519■ FEATURES
Easy to use with 10X magnification of 27mm wide lens. LED light give clear viewanywhere.
Item Code 106„087Product Name LED Flash Loupe R7519
Magnification 10X
Lens / Light 27 mm Glass Lens / White LED x 1
Weight / Dimensions 87 g / φ30 x 100 mm
Battery AAA battery x 3
Loupes 08Loupes 08
No.5054 No.5055 No.5056
S100 S200 101201
102202
104204
SCALE LOUPE■ FEATURES
Precise and easy measurement by Scales loupe. Various purpose aswell as length measurement. Clear and coated Japanese glass lensare used. Made in Japan.
Item Code 106„031 106„032 106„033Model Number No.5054 No.5055 No.5056Magnification 7X 10X 15XIncrement / View 0.1 mm / 20 mm 0.1 mm / 25 mm 0.1 mm / 12 mmLens Elements in Groupes 3 in 2 4 in 3 5 in 3Weight 46 g 70 g 50 gSet lens S100 S200 S100
●Optional LensItem Code 106„118 106„119 106„120 106„121 106„122 106„123Model Number 101 102 104 201 202 204For Scale Loupe No.5054 No.5055
No.SL-10
0.2 mmIncrement
No.SL-15
0.1 mmIncrement
SCALE LOUPE■ FEATURES
Very useful for checking the precise size of Gemstone, withJapanese quality optics. Made in Japan.
Item Code 106„107 106„108Product Name Scale Loupe No.SL-10 Scale Loupe No.SL-15
Magnification 10X 15X
Lens 28 mm 20 mm
4X„6X 10X Fold type
WATCHMAKERS EYE LOUPE
Item Code 106„113 106„114 106„115 106„116 106„117
Product Name Watchmakers EYE Loupe
Model Number No.7210 No.7220 No.7230 No.7300 Fold type
Magnification 4X 5X 6X 10X 6X
Lens 23 mm / Single glass 15 mm / Double glass 20 mm / Acrylic
COLORED LITE LOUPE■ FEATURES
Colored stylish Loupe with LED light (white and blue). Light weight,clear anti„scratch coated with a large 20mm lens. Includes a strapand faceted gift box. 8 colors available as standard color.Please call us for different colors or printing of your company nameand logo as custom„order.
Item Code 106„079 106„080 106„081 106„082 106„083 106„084 106„085 106„086Product Name LITE Loupe
Color Mint Green Dark Pink Pink Champagne White Silver Gray Black
Magnification / Lens 10X / 20 mm
Weight 32 g
* Code 801„115 Battery 5 pcs pack
10X 14X 20X
10X
14X 20X
LOUPE LED eye Pro
Item Code 106„063 106„073 106„074
Product Name Loupe LED
Model Number MRL-106 MRL-144 MRL-204
Magnification 10X 14X 20X
Light LED x 6 LED x 4
Lens 18 mm / Achromatic 11 mm / Achromatic
Weight 60 g / 19 x 82 x 25 mm 31 g / 21 x 70 x 19 mm 30 g / 21 x 70 x 19 mm
Battery LR926 x 3
* 801„087 LOUPE LED Battery 10 pcs pack
Loupes09 Loupes09
MEGAVIEW SERIES■ FEATURES
Megaview comes with three sets of lenses that provide threedifferent magnifications, and working distances that you need fordifferent types of tasks. Megaview can be adjusted to your head sizeeasily.●Very light and compact●Flip„up lenses●Each lens in a protective pouch●Can be worn over eyeglasses
Item Code 106„012 106„013 106„014
Product Name Megaview MG-2 Megaview MG-3 Megaview Pro LED
Magnification 2X, 2.5X, 3X 2X, 2.5X, 3X 2X, 2.5X, 3X, 4X (single)
Weight / Lens 92 g / Acrylic resin 65 g / Acrylic resin 156 g / Acrylic resin
Optional Lens 1.7X 1.7X 1.7X
* Replacement lens available
PROFESSIONAL LENS RX4900 WITH LED■ FEATURES
Frame Lens comes with LED light, Lens (1.5X, 20X, 2.5X, 3.5X),very light weight, and durable. 4 kinds of lenses make it easy to havevarious purposes depending on the task. Safety glasses protectagainst most common eye hazards encountered during bench work.Packed in plastic box.
Item Code 106„059
Product Name Professional Lens RX4900 with LED
Magnification 1.5X, 2.0X, 2.5X, 3.5X
Battery CR1220 x 2
Weight 126 g
* Without Safety Glasses are also available
MONOCULAR LOUPE WITH LED EY„5L & E5X■ FEATURES
Light weight, comfortable wire flames with 5X & LED light (EY-5L).Easily fit to your head & can be used for Jewellery Watch making.
Item Code 106„061 106„062
Product Name Monocular Loupe E5-X Monocular Loupe With LED EY-5L
Magnification 5X
Battery „ CR1620 x 2
Weight 17 g 18 g
GOOSE NECK LOUPE■ FEATURES
Flexible goose neck arm makes it possibleto place Loupe anywhere you like. Veryuseful for checking some details with 2Xmagnification for quality check up.
Item Code 106„098 106„099 106„100 106„101
Product Name Goose Neck Loupe No.1720PC Goose Neck Loupe No.1720PS
Magnification 2X (4X small lens)
Lens / Type 100 mm / Clip type 230 mm 100 mm / Stand type 230 mm
Color White Black White Black
Loupes 10Loupes 10
COMPACT STAND LOUPE■ FEATURES
Compact Stand loupe has lower magnification and mini distortionand easy to use.Used good optics from Japan and hard coated the surface.
Item Code 106„109 106„110 106„111 106„112Product Name Compact Stand Loupe
Model Number No.1610 No.1620 No.1630 No.1650
Magnification / Lens 3.5X / 50 mm 3X / 65 mm 2.5X / 75 mm 2.5X / 75 mmArm length 20 cm
WIDE VIEW STAND LOUPE■ FEATURES
Good for detailed works or readings. Wide view and hard coatedplastic lens, which can fold compact size to carry easy.
Item Code 106„103Product Name Wide View Stand Loupe No.1795
Magnification / Lens 1.8X / 110 x 145 mmSub Lens 4X / 30 mm, 7X / 25mm
No.018-A No.130
No.020
SHEET LENS■ FEATURES
Soft and thin sheet lens developed by special technique from Japan.Easy to carry putting in wallet or a book. Company name can beprinted for novelty gift item, or advertisement in magazine etc.
Item Code 106„095 106„096 106„097Product Name Sheet Lens No.018-A 3.5X Sheet Lens No.130 3.5X Sheet Lens No.020 2X
Magnification / Size 3.5X / 85 x 55 x 0.4 mm 3.5X / 38 x 140 x 0.4 mm 2X / 215 x 280 x 0.5 mm
Package PVC case / 100 pcs OPP pack / 200 pcs OPP pack / 100 pcs
HEART & ARROW LOOSE CASE■ FEATURES
See Heart & Arrow of DIAMOND kept in this case with GS Pet. Let customers see thequality which adds value to merchandise.
Item Code 801„099 801„100
Product Name Hearts & Arrow Loose Case Hearts & Arrow Loose Case(Magnet Type)
Material Acrylic Resin
Parts
Case, Stone Holder(Blue & Pink), Screw x 4,Nut x 4, Pictures(Blue & Pink), Filter x3
(Red 0.7„1.3 ct, Blue 0.5„0.7 ct,White 0.3„0.5 ct)
Case, Stone Holder(Blue & Pink),Pictures(Blue & Pink), Filter x3 (Red
0.7„1.3 ct, Blue 0.5„0.7 ct,White 0.3„0.5 ct)
CLOSEUP LENS FOR MOBILE PHONE & GS PET & GS I PET■ FEATURES
Close„up Lens: Simply attach to the camera of your mobile phone.GS Pet / Mini: Compact diamond cut checker. You can see the hearts and arrow foryourself. Perfect giveaway for your customers.GS I Pet: Handy item to see Inscription on loose or mounted Diamond.
Item Code 106„037 106„018 106„019 106„029 106„065
Product Name Closeup Lens For Mobile Phone GS Pet GS Pet (Stand) GS Pet Mini GS I Pet
HAPPY EGG■ FEATURES
Set the diamond ring inside and you can check thehearts and arrow easy!
Item Code 106„015 106„016 106„017
Product Name Happy Egg
Color Blue White Pink
Scales11 Scales11
A&D CARAT BALANCE■ FEATURES
New Carat Balance manufactured by A&DCO LTD, Japan.Easy and highly visible Vacuum FluorescentDisplay Easy data output from built inRS232C port.Standard weighing trays 2 colors (silver &black) High precis ion, accuracy andreliability carat balance with large windshield which makes it easy to put gems onthe pan.Item Code 202„007 202„006Product Name FX300CT FX600CTMeasuring Range Maximum 310 ct / 62 g 610 ct / 122 gMeasuring Range Minimum 0.001 ct / 0.001 gWeight 3.4 kgDimensions 198 x 294 x 315 mm
* Limited sales area from ALFA MIRAGE
SARTORIUS CARAT BALANCE■ FEATURES
Carat scales for weighing individualgemstones. The easy operation gives youreliable results.The wide plate enable you to measure lotsof stones.Verifiable as legal for trade.
Item Code 202„001Product Name GD-603
Measuring Range Maximum 600 ct / 120 g
Measuring Range Minimum 0.001 ct / 0.001 g
Weight 1.9 kg
Dimensions 180 x 250 x 232 mm
SHIMADZU CARAT BALANCE■ FEATURES
Shimadzu Carat balances engineered withthe UniBloc technology. This provides fastresponse, stability and reliability.
Item Code 202„009 202„010
Product Name TXC-623N TWC-623N
Measuring range Maximum 620 ct / 124 g
Measuring range Minimum 0.001ct / 0.0002 g
Weight 3.8 kg 4.1 kg
Calibration External Internal automatic
Dimensions 206 x 291 x 241 mm
TANITA PORTABLE SCALES
Item Code 201„029
Product Name TANITA NO.1579
Measuring Range 0.01 „ 200 g
Weight / Dimensions 131 g / 150 x 65 x 17 mm
Battery CR2032 x 2
TANITA PORTABLE SCALES
Item Code 202„008
Product Name TANITA NO.1230(100ct)
Measuring Range 0.01 „ 100 ct
Weight / Dimensions 212 g / 160 x 84 x 25 mm
Battery AAA Battery x 4
HJ„150 KP„104 KP„103 JE„500
NEW PORTABLE SCALES■ FEATURES
Pocket size mini scale suitable for all gemstones and small quantities of metal.
Item Code 201„022 201„023 201„025 201„003
Product Name A&D HJ-150 TANITA KP-104 TANITA KP-103 OHAUS JE-500
Measuring Range 0.1 „ 150 g 0.1 „ 200 g 0.1 „ 200 g 0.1 „ 500 g
Weight / Dimensions 90 g / 66 x 98 x 20 mm 100 g / 60 x 134 x 19 mm 112 g / 113 x 90 x 20 mm 160 g / 83 x 136 x 20 mm
Battery / Accessories AAA x 2 / 100 g Weight CR2032 x1/ 200g Weight CR2032 x1/ 100g Weight AAA x 2
Packing per box 10 12 12 6
Gauges 12Gauges 12
GEMSTONE GAUGE C-MASTER■ FEATURES
C-master is user friendly and offers accurate and reliablemeasurements.C-master not only measures the gemstone size, but also calculatesthe stone`s weight.Versatile, C-master calculates the carat weight if gemstonesincluding diamond, sapphire, ruby, emerald, and alexandrite inround, oval, marquis, square, pear, and cabochon cuts.
Item Code 203„001
Product Name Gemstone Gauge C-master
Measuring Range 0.01 „ 25 mm / 0.0005 „ 1 in
Weight / Dimension 160 g / 155 x 54 x 18 mm
Battery Button battery (CR2032)
● Carat calculation mode ● Normal measurement
MITUTOYO DIGITAL CALIPERS■ FEATURES
Mitutoyo`s worldwide most popular high performance digitalcalipers.
Item Code 203„022 203„023
Product NameMitutoyo Digital Caliper
CD-15CPXMitutoyo Digital Plastic
CaliperMeasuring Range 0.01 „ 150 mm 0.1 „ 150 mm
Weight 126 g 45 g
MITUTOYO MICRO METER■ FEATURES
Resolution 1/1000 digital and high quality Micro Meter.Very useful for measuring watch parts, and small part.
Item Code 203„041Product Name Mitutoyo Digital Micro Meter MDC„25SB
Measuring Range 0.001 „ 25 mm
Weight 275 g
Gauges13 Gauges13
AD-5765-100 AD-5765-150
AD-5764-100 AD-5764-150
A&D DIGITAL CALIPER■ FEATURES
A&D Japan produced budget price Digital caliper.(Made in China, inspection in Japan)
Item Code 203„048 203„047 203„056 203„055Product Name AD-765-100 AD-5765-150 AD-5764-100 AD-5764-150
Measuring Range 0„100 mm 0„150 mm 0„100 mm 0„150 mm
Minimum Resolution 0.1 „ 100 mm 0.1 „ 150 mm 0.01 „ 100 mm 0.01 „ 150 mm
Body Material Carbon ABS plastic Stainless
Weight 35 g 50 g 90 g 165 g
70 mm
MINI CALIPER■ FEATURES
Very compact and precise caliper. Range up to 70 mm, outside andinside diameter, depth and level height measurement.
Item Code 203„059
Product Name MINI Caliper 19892
Measuring Range 0.05 „ 70 mm
Body material High carbon steel
Weight 25 g
PEARL SCALE & PEARL GAUGE■ FEATURES
Alfa Mirage`s popular analog pearl scale. Compact and portable.
Item Code 203„019 203„020
Product Name Pearl Scale Pearl Gauge
Measuring Range 0.1 „ 20 mm 0.1 „ 50 mm
Weight / Dimensions 96 g / 100 x 53 mm 34 g / 73 x 20 mm
JAPANESE SIZE RING STICK / RING GAUGE“PINKY”■ FEATURES
Ring stick and gauge for Pinky finger, made with hard plastic.
Item Code 203„060 203„061
Product Name Ring Stick“PINKY” Ring Gauge“PINKY”
Ring Size P5, P4, P3, P2, P1, #1, #2, #3, #4, #5
JAPANESE SIZE RING STICK / RING GAUGE
Item Code 203„037 203„002 203„005 203„004 203„003
Product Name Ring Stick Baby Ring Stick SteelMandrel Ring Stick Pocket Ring Stick Deluxe
AluminumRing StickAluminum
Ring Size No. 1~3 No. 3~27 No. 6~20 No. 3~27 No. 1~30
Item Code 203„009 203„012 203„010 203„011 203„038
Product Name Ring GaugeWide Band
Ring Gauge InsideHalf Round
Ring GaugeHalf Round Ring Gauge Pocket Ring Gauge Plastic
Ring Size No. 1~30 No. 1~30 No. 1~30 No. 6~20 No. 5~20
Gauges/Tweezers 14Gauges/Tweezers 14
CARD SIZE CALIPER & CARD SIZE GAUGE■ FEATURES
0.3 mm ! The thinnest Card Caliper & 3g Gauge in the world.
Item Code 203„053 203„054
Product Name Card Size Caliper Card Size Gauge
Weight / Dimension 7.8 g / 86 x 54 x 0.3 mm 3 g / 86 x 54 x 0.1 mm
▲
13 mm
▼
40 mm
MKS DIAMOND GAUGE■ FEATURES
Very compact and easy to carry arround.
Item Code 203„044
Product Name MKS Diamond Gauge
Measuring Range 0.01 „ 1 ct (13 holes)
Size 40 x 13 mm
NECKLACE GAUGE & BRACELET GAUGE■ FEATURES
Necklace gauge & Bracelet gauge will be your greatest help to findperfect size.
Item Code 203„015 203„016
Product Name Necklace Gauge Bracelet Gauge
Measuring Range 30 „ 80 cm 14 „ 26 cm
Length 86 cm 27 cm
REGINE TWEEZERS■ FEATURES
Swiss made high quality jewelry tweezers. INOX is used for rust proof.All tweezers Length 160 mm (Pearl Tweezers 147 mm).
Item Code Model Number Tip Style
401„039 XF Extremely Thin / 0.4 mm
401„004 F Ultra Thin / 0.6 mm
401„005 M Thin / 0.9 mm
401„006 L Mid / 1.2 mm
401„007 XL Thick / 1.8 mm
401„001 MR Thin & Stopper
401„002 LR1 Mid, Stopper & Grooved
401„003 XLR Thick & Stopper
Item Code Model Number Tip Style
401„011 M1 Thin & Grooved
401„012 L1 Mid & Grooved
401„013 XL1 Thick & Grooved
401„014 XXL1 Ultra Thick & Grooved
401„008 BF Ultra Thin & Black
401„009 BM Thin & Black
401„010 BL Mid & Black
401„015 PEARL Resin Coated
Pliers/Nippers15 Pliers/Nippers15
BAMBOO TWEEZERS■ FEATURES
Never damage the Gemstones. Good for holding Pearls with Flat tip.
Item Code 401„026 401„023 401„027
Product Name Bamboo Tweezers L Bamboo Tweezers SBamboo Tweezers(Flat)
No.150
Length 250 mm 150 mm 180 mm
LOUPE TWEEEZERS■ FEATURES
Tweezers with Loupe help you when sorting stones out as youhaving a clear view.
Item Code 401„043Product Name Loupe Tweezers NO.1960
Magnification / Lens 4.5X / 30 mm
STONE SHOVEL■ FEATURESBlack colored stone shovel supplies easy viewable“Mellee Diamond”for scooping and handling.
Item Code 401„030 401„031Product Name Stone Shovel S Stone Shovel M
Color Black
Dimensions 60 x 45 x 15 mm 70 x 60 x 18 mm
GEM TWEEZERS■ FEATURESTouch tone and 4„foot catcher type. Suitable for loose stones.
Item Code 401„019
Product Name Gem Tweezers
Weight / Length 16 g / 120 mm
3 PEAKS PLIERS SM SERIES■ FEATURES
Precision pliers & nippers from 3 Peaks Japan. Precise tip, tough andsoft on hands with 3 peaks developed plastic spring tension.
Item Code 301„046 301„048 301„049 301„051 301„052 301„059
Product Name
MiniMicro
Nippers
SM-01
NeedleNosePliers
SM-03
BentNeedleNosePliers
SM-04
EdgeCuttingNippers
SM-06
FlatNosePliers
SM-07
RoundNosePliers
SM-08
Weight / Length 55 g / 100 mm 65 g / 130 mm 55 g / 115 mm 60 g / 115 mm
Cutting Capacity Copper 1.6 mm „ Copper 1.0 mm „
3 PEAKS PLIERS SP SERIES■ FEATURES
Light weight user friendly SP series.
Item Code 301„053 301„056 301„060 301„057 301„058
Product Name
CuttingNippers
SP-31
Needle LongFlat Nose
PliersSP-34
Bent LongFlat Nose
PliersSP-35
Short FlatNose Pliers
SP-36
Round NosePliers
SP-37
Weight / Length 45 g / 130 mm 55 g / 150 mm
Cutting Capacity Copper 1.6 mm „
Pliers/Nippers 16Pliers/Nippers 16
3 PEAKS NIPPER SN-130■ FEATURES
Compact, sharp tip and high cutting capacity Nippers. Work very well forthin stainless wire or piano wire which easily damages the regular nipper.Master craftsmen are sharpening the tip one by one.
Item Code 301„018
Product Name 3.Peaks Nipper SN-130
Weight / Length 90 g / 133 mm
Cutting Capacity Iron wire 2.0 mm
3 PEAKS GREEN CUTTERS■ FEATURESReputable in the world Jewelry market. High quality cutters for Jewelry casting tree.Perfect sized tip„end which goes inside of the tree easily.
Item Code 301„015 301„016 301„017
Product Name 3.Peaks Green Cutter
Model Number GC-200 GN-200 EC-200
Weight / Length 270 g / 200 mm 255 g / 200 mm
Cutting Capacity Steel Wire 1.5 φ, Iron Wire 4.0 φ
JAPANESE HIGH QUALITY NIPPERS■ FEATURES
NS„06 is the most popular model at Japanese jewelry market withreasonable price and performance.Very easy to handle and adjust the opening angle.Sharp & slender designed well suited for precise work.Made in Japan.
Item Code 301„012 301„071 301„072
Product Name Micro Nipper NS-06 Chip Cutter NZ-03 Chip Cutter NZ-05
Weight / Length 52 g / 105 mm 64 g / 115 mm 67 g / 112 mm
Cutting Capacity Copper Wire 0.8 mm Copper Wire 0.6 mm Copper Wire 0.6 mm
MINI TOOLS KIT■ FEATURES
For Jewellry to beading craft people. Easy to carry out andconvenient to use them for small repair or something outside ofstudio.
Item Code 301„080
Product Name 8PC Mini Tools Kit
Contents Nippers, Pliers 4 kinds, Tweezers, Scissors, Scoop
3 PEAKS SCREW PLIERS■ FEATURES
Works very well for screw which thread groove has gone.Specially designed pliers tip catch screw to open.
Item Code 301„081 301„082
Product Name Screw Pliers DS-150TZ Screw Pliers DS-175TZ
Weight / Length 125 g / 150 mm 240 g / 175 mm
Pliers17 Pliers17
STAINLESS PLIERS WITH RUBBER GRIP■ FEATURES
Pliers with Rubber Grip aredesigned for intricate anddetailed works.Handy comfortable plierswith fancy colors.
251 252 253 254 255
Item Code 301„006 301„007 301„008 301„009 301„010Model Number No. 251 No. 252 No. 253 No. 254 No. 255
Nose Shape
Half Round Round & Half Round Round Half Round Round & Half Round
Length / Color 135 mm / Blue 135 mm / Orange 135 mm / Yellow 160 mm / Blue 160 mm / Orange
256 257 258
STAINLEES PLIERS WITH RUBBER GRIP UNIQUE TIP SERIES
Item Code 301„075 301„076 301„077
Model number No.256 No.257 No.258
Nose Shape
Concave & Convex Caulking Flat Nose
Length / Color 135 mm / Black 160 mm / Green 140 mm / Gray
PRONG LIFTER■ FEATURES
Pliers for taking the stones out from the ring. No technique required.
Item Code 301„011
Product Name Prong Lifter
Weight / Length 98 g / 135 mm
#402 #120
#403 #121
SAFETY GOGGLE■ FEATURES
These high quality safety goggles are conform to USA standard ofANSI Z87.1.Protect your eyes when you working on buffing, bench works etc.
Item Code 601„089 601„091 601„090 601„092Product Name TSK Safety GoggleModel Number #402 #403 #120 #121Color Clear Black Clear BlackApplication DX Scratch„resistant coating Glass on type
HANDMADE JAPANESE STAMP■ FEATURESEvery single stamp is professionally handmade. Almost all thepopular models are available.* Custom stamps can be designed according to your request.
Product Name Japanese Made Manual Stamps
Shape Straight:Plate, Outside Ring
Curved:Inside Ring
Deep Curved:Wideband Ring Inside
Size 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm, 1.2 mm
Letters
Letters A to Z (capital), Letters A to Z (lower case),Number (0 to 9), Silver, 900, 925, 950, K14, K18,
K24, K14WG, K18WG, WG, Pt, Pt850, Pt900,Pt950, Pt1000
Sprue Cutter / Grinder 18Sprue Cutter / Grinder 18
NILE SPRUE CUTTERS
■ FEATURES
Nile Sprue Cutter has established worldwide high reputation since it was
produced for the first time in 1967.
It helps you achieve higher productivity and remarkable cost saving in cutting jobs.
Available different types of replaceable cutting blades.
Item Code 302„001 302„002 302„003
Product Name Nile Sprue Cutter
Model MR20 MP25A MP35A
Length & Diameter 140 mm / 45 mm 190 mm / 45 mm 268 mm / 56 mm
Power 140 kg 160 kg 450 kg
Air Pressure 5 ~ 6 kg / cm2
Item Code 302„004 302„005 302„006 302„007
Product Name Change Blade
Model S5 EP10P Z8PO S7P
Available For MP25A / MR20 MP35A
Item Code 302„008 302„009 302„010 302„011 302„012
Product Name Straight Hose Curl Hose Stand (MR20 / MP25A) Stand (MP35A) Foot Pedal
Model UH„2 SE„40 „ „ FB„70S
NAKANISHI E-MAX EVOLUTION■ FEATURES
Tough Torque Brushless Motor ・FlashingLive Load Indicator ・Auto-Cruise Controland FIXSPEED Function
Item Code 303„025 303„024
Product Name E-MAX Evolution Standard Set
RPM 1,000~40,000
Power 100 V / 30 W 220 V / 30 W
Weight 182 g (Hand piece)2.3 kg (Control unit)
Accessories
Control unit(NE249), Micro Grinder(Ring type IR„310+ENK„410S),
Collet chuck (φ2.35 & 3.0),Other standard accessories
Option Foot pedal FC„40
NAKANISHI ESPERT 500
■ FEATURES
Realized high output power of 200W andhigh durability product by the harmoniouscombination of a hall„element brushlessDC motor and high grade electroniccircuitry.
Item Code 303„004 303„006
Product Name Espert 500 Standard Set
RPM 1,000~50,000
Power 100 V / 140 W (max) 220 V / 140 W (max)
Weight 170 g (hand piece) /2.6 kg (Control unit)
Accessories
Control unit(NE96), Motor(ENK„500C),Attachment(HER„500),
Attachment holder, Collet chuck (φ2.45& 3.0), Other standard accessories
Option Foot Pedal FC„40
MICRO GRINDER MAXIMA■ FEATURES
MAXIMA micrometer electric power toolset, consisting of a power pack, rotarymicro motor, foot rheostat, handpiececradle and accessories made for CE markand ISO9000 qualifications.
Item Code 303„022
Product Name Micro Grinder Maxima
Max RPM 35,000
Power 110 V / 220 V Select switch (50/60 Hz)
Weight 200 g (Handpiece) / 1.6 kg (Control unit)
AccessoriesPower pack (PS220), Handpiece(TPH„6501),Rheostat(TPF„77), Handpiece cradle,A pair of Carbon brush, Collet chuck wrenches
Polishing Compounds19 Polishing Compounds19
CG GGDJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IEGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGF
Final Mirror Finish (Gold, Platinum, Silver, Stainless steel and Other metal)★■■■SSSSSSSSSSSSSSSSSSSSSHHHHHHHHHHHHHHHHHHHHHIIIIIIIIIIIIIIIIIIIIINNNNNNNNNNNNNNNNNNNNNYYYYYYYYYYYYYYYYYYYYY
■
■
Polished with other compound Polished with Midori
POLISHING COMPOUND: MIDORI■ FEATURESSpecially designed for mirror finish luster of PT, Gold and Silver.It can also apply for stainless steel or other metals. New technologyachieved this polishing compound with high performance andreasonable price. Please use it with soft buff. Easy to clean up afterbuffing.Item Code 501„040Product Name MidoriWeight 150 gApplication Final / Lustering / Mirror finish
CGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGDJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IEGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGF
GoldPOLIART ORANGE
■ FEATURESA polishing and coloring compound for gold.Produce ultra bright shine and impart a rich luster to gold.
Item Code 501„008Product Name Poliart Orange
Weight 150 g
Application Final / Lustering
CGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGDJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IEGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGF
SilverD-24 / D-36
■ FEATURESExcellent medium dry compounds for silver, white gold and any white metals.D series are made in Japan and have a composition with a very light cutting and high lusterfinish.
Item Code 501„032 501„033Product Name D-24 D-36Weight 490 g 490 gApplication Lustering Lustering
CGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGDJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IEGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGF
PlatinumPICASSO
■ FEATURESSpecially designed for platinum, each compounds are manufactured under strict qualitycontrol, tested and proven for awesome results. It brings a very high luster to platinum.
Item Code 501„014Product Name Picasso
Weight 150 g
Application Final / Lustering
NW SERIES■ FEATURESThe finest compounds for ultra bright finishing of platinum. NW Series are manufacturedunder strict quality control. * Polishing must be done in steps in order to achieve bestresults.
Item Code 501„015 501„016 501„017 501„018 501„019 501„020 501„021 501„022Model Number #800 #1000 #1500 #2000 #2500 #4000 #6000 #8000
Weight 400 g 400 g 400 g 400 g 300 g 250 g 250 g 250 g
Application First Cut Medium Cut Medium Cut Fine Cut Final Cut Super Shine
Polishing Compounds/Hand tools 20Polishing Compounds/Hand tools 20
CGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGDJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IEGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGF
Tungsten / Carbide MetalTUNGSTAR
■ FEATURESTungstar, a polishing compound specially formulated for tungstenjewellery or carbide metals. It contains diamond powder, and itbrings high„gloss and mirror tungsten jewellery by buffing.Item Code 501„029 501„031Product Number TG-1 TG-3Diamond size Less 1 μ 3„8 μDiamond contents 19 g (38% +/„0.1%) 18 g (36% +/„0.1%)Weight 50 g 50 gApplication Final mirror finish Mid to final
CGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGDJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IJ IEGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGF
TitaniumTITANIUM TP SERIES
■ FEATURES●For Sisal BuffTP„100: Shows great effects in a process of removing scratchesand waves of material.TP„200: Suitable for cutting and coloring to get a smooth surfacewithout pin holes.●For Cloth BuffTP„300: Removes sisal pattern smoothly, and a luster surfaceequivalent to No. 6* finish of stainless steel can be obtained.TP„400: Prevents works to have pin holes and buff scratches whilepolishing at high load. A luster surface with a high reflection rateequivalent to No. 7* finish of stainless steel can be obtained.
Item Code 501„005 501„034 501„035 501„006Model Number TP-100 TP-200 TP-300 TP-400Weight 400 g 400 g 400 g 400 gApplication Rough Intermediate Final Luster* No. 6 / No. 7 of AISI (American Iron and Steel Institute)
KOYO POLISHING COMPOUND■ FEATURES
Quality polishing compound helps productivity and good finish.K„1 Green Rouge: General purpose for preliminary finishingapplications.Alox„5 White: For final finish, to achieve a distinctive luster.
Item Code 501„002 501„003Product Name KOYO ALOX-5 (LARGE) KOYO Green Rouge K-1
Weight 340 g 480 g
Application Final Luster
DENYU MOTOR FOR PLATINUM 6000■ FEATURES
Ultra Bright Finishing for Platinum Jewelry.This state„of„the„art motor provides high power, vibration freeand quiet operation. Motor has a variable speed amazingly from1000 ~ 6000 rpm and with the digital inverter. User can adjust thebest suitable rpm for silver, gold, platinum jewelry. * RecommendedRPM (Silver: 1,000 rpm / Gold: 4,000 rpm / Platinum: 6,000 rpm)Item Code 303„014 303„015Product Name Denyu Motor for PlatinumModel Number DSB-500IV SSB-500IVRPM 1000 - 6000Appropriate Buff Size 180 (Diameter) x 25 (Thickness) x 16 (Center Hole) mmPower Single phase 100 V 50 / 60 Hz Triple phase 220 V 50 / 60 HzInput Power Source 960 VAShaft Height 185 mmWeight / Dimension 27.5 kg / 724 (L) x 300 (W) x 250 (H) mm
COMBINATION POLISHING MACHINE SAY„120■ FEATURES
Cutting, Grinding, Sanding, and Finishing for Gemstone can be donewith a machine. As the rubber seal bearing used, you do not need tooil the machine or to care for the maintenance.
Item Code 305„113Product Name Combination Polishing Machine SAY„120
RPM for Duplex Grinder2 Speed changeable
1300 / 2300 rpm / 60Hz1080 / 1900 rpm / 50Hz
RPM for Surface Grinder 1750 rpm / 60Hz1450 rpm / 50Hz
Shaft Diameter 12.7 mm
Dimension / Weight 380 (W) x 550 (D) x 470 (H) / 28 kg
Hand tools21 Hand tools21
CERA-STONE PENCIL■ FEATURES
Polishing like a drawing! Extra fine Ceramic Fiber Abrasive (0.5 mm& 0.9 mm) polishes the narrow or detailed designed parts where noteasy to polish with buff.
Item Code 304„198 304„199Product Name Cera-Stone Pencil Set 0.5mm Cera-Stone Pencil Set 0.9mm
Content Pencil, Cera-stone #800 x 1 , #1200 x 1
Item Code 304„200 304„201 304„202 304„203Product Name Cera-Stone Pencil Refill 0.5mm Cera-Stone Pencil Refill 0.9mm
Grit #800 #1200 #800 #1200
QTY (pcs) 3 3 3 3
CERA-STONE■ FEATURES
Improved fiber orientation technology achieved to produceinnovative abrasive Cera-stone. It`s made of alumina fiber, glassfiber and thermoset epoxy resin. Tough, less clogging Cera-stonecan use stable for a long time.Shape the tip with abrasive paper, and polish detail parts, corneredge easily.
Item Code 304„139 304„140 304„141 304„142 304„143 304„144 304„145 304„146 304„147
Product Name Cera-Stone
Grit size Brown#180
Orange#250
Black#280
N„Blue#360
Blue#400
Green#500
Yellow#700
Pink#1000
Red#1200
Outer Diameter / Length 2.35 X 50 mm
Minikong Head Parts Kit
MINIKONG & PARTS KIT■ FEATURES
Compact and cost efficient hand grinder kit. Easy operation.It comes with fancy aluminum case, so you can take it with youanywhere you go.PARTS KIT : You will get various kinds of points for yourconvenience.
Item Code 303„012 303„013Product Name Minikong Head Parts Kit
Power 100 V 50/60 Hz „
RPM 3,000 ~ 13,000 „
Accessories Handpiece, Points x 44 Points x 80, Polishing compound x 1
Weight / Dimensions 700 g / 220 x 150 x 60 mm 600 g / 220 x 150 x 60 mm
LOOSE STONE CHECKER■ FEATURES
This is the machine to check the stones on Jewelry are fixedproperly, by giving the vibration. You can easily find out the stoneswhich set loose through Magnifying glass. Good for quality controland can be set standards between factory and buyer.SCK„202 has adjustments for the pulse cycle, vibration power forprecise and efficient performance.
Item Code 801„063 801„077Product Name SCK-101 SCK-202
Weight / Dimensions 1.2 kg / 256 x 132 x 45 mm 10 kg / 320 x 245 x 210 mm
Power / Consumption 100 V / 10 W 100 V / 30 W
Accessories Holder for ring & pendant x 1 pc eachMagnifying Glass
ULTRASONIC SPATULA SUZUX■ FEATURES
Polishing machine to make metal surface glossy easily with itsultrasonic vibration. Just put the tip of the front edge on the surfaceof the material lightly, you will find how shiny. It`s automatically shutdown in 15 minutes when not in use.
Item Code 305„078Product Name SUZUX
Model Number SUB-100
Power 100 V 50/60 Hz
Output High: 30 W / Low: 15 W
Amplitude / Frequency High: 23 um / Low: 13 um / 23 kHz
Accessories Handpiece, Handpiece stand, Tool holder, Foot pedal, Cone type spatula
Weight / Dimensions 3 kg / 185 x 155 x 74 mm
Hand tools 22Hand tools 22
DF POINT■ FEATURES
DF type has a unique elasticity, and excellent for heavy grinding & shaping.DF type can be also used for several situations and conditions duringmanufacturing process such as removing, cutting trace and tooling marksand de„burring as middle finishing process.
Product name DF POINT
Size 10 x 20 xφ2.35 mm 6 x 15 x φ2.35 mm 22 x 3 x φ1.6 mm
Shape Cylinder Bullet Cylinder Bullet Wheel
#120 GREEN 304„126 304„125 304„173 304„172 304„178
Grit #220 YELLOW 304„128 304„127 304„175 304„174 304„179
#320 BROWN 304„130 304„129 304„177 304„176 304„180
* 100pcs / pack
DX POINT■ FEATURES
DX type is the best for final polishing, and it is able to have much more polishablethan DF type. DX type was made exclusive for Jewelry & Gem final polishing.
Product name DX POINT
Size 10 x 20 xφ2.35 mm 6 x 15 x φ2.35 mm 22 x 3 x φ1.6 mm
Shape Cylinder Bullet Cylinder Bullet Wheel
#80 PINK 304„132 304„148 304„154 304„160 304„166
#120 BLUE 304„133 304„149 304„155 304„161 304„167
Grit #220 GREEN 304„134 304„150 304„156 304„162 304„168
#320 NAVY 304„135 304„151 304„157 304„163 304„169
#500 ORANGE 304„136 304„152 304„158 304„164 304„170
#1000 GRAY 304„137 304„153 304„159 304„165 304„171
* 100pcs / pack
DIAMOND DRILL BIT■ FEATURES
Small size diamond drill for drilling a whole in Gemstones.
Item Code 304„253 304„254 304„255 304„256 304„257 304„258
Product Name Diamond Drill Bit
Size 0.75 mm 1.00 mm 1.25 mm 1.5 mm 2.0 mm 2.5 mm
Contents 10 pcs / pack
ROLL PAPER POINT■ FEATURES
Use after filing as a rough textured.(Japanese abrasive papers)
Item Code 304„118 304„119 304„120 304„121 304„122 304„123
Product Name Roll Paper Point
Grit #240 #320 #400 #600 #800 #1000
SPIRAL WHEELItem Code 304„062 304„063 304„064 304„065 304„066 304„067Product Name Spiral WheelFeatures Speedy mid-finishingSize 9 / 16Type Yellow: 80 Brown: 220 Blue: 400 Pink: 800 Orange: 6u Green: 1u
CARBIDE ROTARY BAR■ FEATURES
Suitable for filling the hollow of cast products. Used for tighten the surface ofmetals and burnishing.
Item Code 304„070 304„071 304„072 304„073 304„074Product Name Carbide Rotary BarFaces 12 18 36 18 (L) 36 (L)Size φ5 x 13 mm φ10 x 7 mm
Hand tools23 Hand tools23
FREE CUT DIAMOND ABRASIVE PAPERS■ FEATURESNew and innovative grinding material that can not only replace anysand„ or grinding paper but offer a wide range of new possibilities.It is made of a thin but stiff copper sheet where the diamonds areplaced onto.A strong tape on the backside makes it easy to attach to any surface.* Making texture (High shine matt finish) on metals nicely as
diamond grain particle size is precise.* Powerful grinding tool and long life.
Item Code 304„204 304„205 304„206 304„207 304„208 304„209 304„210 304„211 304„212 304„213Product Name Free Cut Diamond Abrasive PaperSize 50 x 100 mm 100 x 100 mmGrid #140 #200 #400 #600 #1200 #140 #200 #400 #600 #1200
DIAMOND ABRASIVE PAPERS STICKItem Code Grid Type Dia paper size Stick304„233 #140 FLAT304„234 #200304„235 #400304„236 #600304„237 #1200304„238 #140 SHIP304„239 #200304„240 #400 10 X 50 mm 200 mm304„241 #600304„242 #1200304„243 #140 H-ROUND304„244 #200304„245 #400304„246 #600304„247 #1200
PRECISION DIAMOND FILES■ FEATURES
Diamond files from Japan. Long lasting and powerful grinding withDiamond files.
Item Code 304„259 304„260 304„261 304„252Product Name Precision Diamond File (S)Model Name S-5 Set of 5 S-8 set of 5 S-10 set of 5 S-12 set of 5Length (Dia) 200 (75) mm 185 (70) mm 175 (55) mm 170 (50) mmGrid #140 (#400 avaiable)
Shape
Half„round, Hand, 3 Square, Square, Round
* Individual size and shape order available.
BRASS BRASH■ FEATURES
One of the most popular Brass Brash made in Japan. Even thoughmachine made brash, it can be used for a long time.
Item Code 305„112
Product Name Brass Brash 19300 / 4 rows
Dimensions 4 rows / 16 colums, 239 x 18 x 9 mm
Brash Diameter 0.14 mm / Length 16 mm
No.260
No.261
No.262
No.263
JAPANESE BURNISHERS■ FEATURES
Burnishers can be used for making mirror finish the silver/metalsafter fired.Push/press hard on surface with side of burnishers to get shine.
Item Code 305„070 305„071 305„072 305„073 305„068Product Name Japanese BurnisherModel Number No.260 (Red) No.261(Yellow) No.262(Green) No.263(Blue) NO.264(4pcs set)Shape Oval Medium Round Medium Oval Small Round Small „Length / Diameter of Hold 160 /φ5.3 mm 160 /φ5.0 mm 160 /φ3.5 mm 160 /φ3.5 mm „
No.270
No.271
No.272
No.273
JAPANESE SPATULAS■ FEATURES
Use on clay, adding, removing, designing details. Correction orshaping of the clay.
Item Code 305„074 305„075 305„076 305„077 305„069Product Name Japanese Spatula
Model Number No.270 (Red) No.271(Yellow) No.272(Green) No.273(Blue) NO.274(4pcs set)
Length / Diameter of Hold 175 / φ6 mm
Hand tools 24Hand tools 24
POLISHING SHHET“MICRO POLINET”■ FEATURES
* Micro„Polinet is a very flexible sanding cloth using ultra finescreen„mesh cloth (100 mesh).
* No„clogging : Screen„meshed structure prevents from clogging.* Screen„mesh: Easy to polish the exact point by seeing through
the screen„mesh.* Both sides use : Both sides are coated with grains.* Water proof & oil resistant : Can be ued for both wet and dry
operations.
Item Code 304„220 304„221 304„222 304„223 304„224 304„225
Product name Micro„Polinet 100 mesh
Color / Grit Indigo Blue#600
Yellow#800
Red#1000
Blue#2000
Light Orange#3000
Grass Green#4000
Size 210 x 280 mm
Quantity (Box) 25 pcs
KOVAX WATERPROOF ABRASIVE PAPER■ FEATURESOne of the most popular waterproof abrasive papers.High cutting and easy to use fitting fingers.
Item Code 304„181 304„182 304„183 304„184 304„185 304„186 304„187 304„188
Product Name KOVAX Waterproof Abrasive Paper
Size 230 x 280
Grid #120 #240 #320 #400 #500 #600 #800 #1000
Quantity (Box) 100 100 100 100 100 100 100 100
PRECISION NEEDLE FILE“UO-CHIKYU”■ FEATURES
UO„CHIKYU produces one of the best precision needle files fromJapan.
Item Code 304„248 304„249 304„250 304„251
Product Name 5„PCS Precision Needle File UO„CHIKYU 8„PCS Precision Needle File UO„CHIKYU
Teeth #6 #3 #6 #3
Length / Diameter φ3.9 x 200 mm φ3.4 x 180 mm
Shape Hand, 1/2Round, RoundSquare, 3„Square
Hand, 1/2Round, RoundSquare, 3„Square
Barette, Flat, Crossing
* Individual size and shape order available.* 10-pcs set(φ2.9 x 160 mm)and 12-pcs set(φ2.4 x 140 mm)available.
Please call for detail information.
VALLORBE SAW BLADES■ FEATURES
World`s well„known brand Vallorbe Swiss. High quality saw bladefor jewelers.
Item Code 305-052 305-051 305-050 305-049 305-048 305-047 305-039
Model Number No. 8/0 No. 6/0 No. 5/0 No. 4/0 No. 3/0 No. 2/0 No. 0
Item Code 305-040 305-041 305-042 305-043 305-044 305-045 305-046
Model Number No. 1 No. 2 No. 3 No. 4 No. 5 No. 6 No. 8
HERKULES SAW BLADES■ FEATURES
German made high quality blade for jewelers.
Item Code 305-065 305-064 305-063 305-062 305-061 305-060 305-053
Model Number No. 8/0 No. 6/0 No. 5/0 No. 4/0 No. 3/0 No. 2/0 No. 0
Item Code 305-054 305-055 305-056 305-057 305-058 305-059
Model Number No. 1 No. 2 No. 3 No. 4 No. 5 No. 6
Hand tools25 Hand tools25
MICRO KNIVES■ FEATURES
Small & hard knives. 7 kinds of knives are suitable for craftwork,modeling, and hobby purpose. Also they are designed for intricateand detailed work for Wax Modeling. Available by 1pc each. Chooseyour best suitable shapes.
Item Code 301„038 301„039 301„040 301„041 301„042 301„043 301„044
Model Number TK„01 TK„02 TK„03 TK„04 TK„05 TK„06 TK„07
Cutting Edge Flat(L) Flat(S) Round(L)Round(S)Triangular Skew(L) Skew(L)
Edge x Length 3 x 140 mm 1.2 x 140 mm 1.2 x 140 mm 1.2 x 140 mm 2 x 140 mm 4 x 140 mm 4.5 x 140 mm
WAX CARVING SET■ FEATURESSet of Spaturax 7 pcs(14 kinds tip), Wax Cutter x 4 pcs, Needle x 1pc Wax-Carving tools for professional. Every single Spatura isprofessionally handmade. Including CD-ROM showing instruction ofhow to use the each tool.You will increase quality & production speed with this ProfessionalWax Carving Set.Item Code 301„055Product Name Wax Carving SetContent Spatura x 7 pcs(14 kinds), Wax cutter x 4 pcs, & Needle x 1 pcMaterial Quenched Steel
① ② ③ ④ ⑤ ⑥
WAX CARVER■ FEATURESGreat for Carving, Shaping, Texturing and Sizing with ultra compactunit. Simply use the dial control to deliver the temperature requiredat the tip.Item Code 503„025 503„026Product Name Wax Carver Red Wax Carver BlackMaximum Heat 255℃Dimensions 50 x 65 x 41 mm Hand piece(φ10 x 120 mm)
Accessories Controler, Handpiece, AC Adaptor (100„240 V)Tips (①Knife, ②Straight taper, ③Flat 4 mm)
Option Tip : ④Spoon (L), ⑤Spoon (S), ⑥Carved taper
SUPER INJECTION WAX MB■ FEATURESEasy removing without distortion are key features of Super InjectionWax.Developed for the caster who needs a wax to reproduce sharp detailand it will not break upon removal from the mold.Item Code 503„017Product Name Super Injection Wax MBColor BlueTemperature 85 „ 90 ℃Content 1 kg
* 10 kg / Box
HTB MOLD SILICONE RUBBER■ FEATURESMold the master form of the ring or pendant with this silicone rubber.Long lasting Mold keeps quality and saves time and money.P : Budget price, good for simple design, can use outer„parts of O,MK or BNO : Less mismatch, smooth surfaces for wax, High tear resistance,Harder mold, Good for complex Jewelry.BN: Good for complex Jewelry and the best for using center„part(inside) mold.MK: Universal Rubber, Matches any to shapes
Item Code 503„001 503„003 503„004 503„005Product Name P O BN MKColor Pink Orange Blue YellowHardness(vulcanized) 45 55 40 50Tear Strength Middle High High MiddleTensile Strength Middle High High HighVulcanize 110 to 130 ℃ 1 min. per 1mmShrinkage 2.00 % 1.80 % 2.00 % 1.80 %Storage Life 3 months (less 20℃) 5 months (less 20℃) 3 months (less 20℃) 5 months (less 20℃)
Hand tools 26Hand tools 26
HEAT FORM■ FEATURESJapanese most popular Holder for holding and supporting jewelryduring engraving. Dip it into hot water(60℃), and form any shapesyou like.Dip into hot water again. And you use it time and time again.
Item Code 503„019Product Name Heat Form
Weight / Dimensions 220 g (10 sheets / Box) / 90 x 65 x 2 mm
SOLDERING TWEEZERS■ FEATURES
Useful for soldering or when you heat the objects, especially forPlatinum. Heat„resistant is up to 3000℃
Item Code 401„020 401„021 401„022 401„024 401„025
Model Number BS-3000A BS-3000B BS-3001 BS-3002 BS-3003
Length 145 mm 175 mm 180 mm 170 mm 140 mm
Type Small Large Self„Lock Large„Curve Small„Curve
PLATINUM CRUCIBLES■ FEATURES
Most popular crucibles for process of making Platinum Jewelry.Japanese traditional technological PT crucibles have high durabilityand productivity. Ceramic Crucibles: Durable crucibles for Platinumand can be used several times.
Item Code 503„009 503„010Product Name Ceramic CruciblesDiameter φ60 φ70
BURNER RZ-510■ FEATURESHigh„Quality Japanese made HandyBurner Torch which works with butane gas.T e m p e r a t u r e 8 0 0℃„ 1 3 0 0℃ w i t hadjustable frame. Working time is about 25min for small work for Jewellery repair.Keep the Flame with Hold Knob function.
Item Code 302„075Product Name Burner RZ-510
Weight / Dimensions 193 g / 72 x 58 x 150 mmNozzle size: φ12 mm
Temperature Attainable 800 „ 1300℃ (With air adjustment control)Working time 25 min. (Gas capacity 7 g)
PRINCE TORCH GT-300S■ FEATURESWell„known Burner Torch in the world(Made in Japan)Flame size can be adjusted easily.
Item Code 302„029Product Name Prince Torch GT-3000
Weight / Dimensions 154 g / 62 x 155 x 75 mm
Temperature Attainable 1300 ℃
Working Time 35 min.
TORCH REKROW■ FEATURESPortable Torch refuelable with butane. Itworks well for Jewelry repair and meltingGold & Silver, holds enough butane for onehour. Electric ignition makes it possible toadjust flame easily.Item Code 302„013 302„025Product Name Torch RK2060 Torch RK4103Weight / Dimensions 380 g / 35 x 155 x 90 mm 456 g / 115 x 80 x 103 mmTemperature Attainable 1300 ℃Working Time 60 min.
PLATINUM INVESTMENT A1„ MIX■ FEATURES
Ideal investment for Platinum.Smooth and stable surface withoutmass cast hollow or few burrs.
Item Code 503„008
Product Name Platinum Investment A1-MIX
Purpose For Platinum Material
Content 25 kg (With 500 cc binder)
NORITAKE INVESTMENT GIFT■ FEATURES
Corresponding to flash heating.Outstanding in extreme increase oftemperature. Easy to take off thecasting object. Smooth castingsurface. Perfectly suits for Gold andSilver casting.
Item Code 503„007
Product Name Noritake Investment Gift
Purpose For Gold and Silver Material
Cntent 20 kg
From Mixture to the End Approx. 70 min.
Plating/Cleaning27 Plating/Cleaning27
PROMEX PLATING MACHINE■ FEATURESPromex plating Machine enables you to plate safely & quickly withdisposable pen(23 kinds). Each pen contains 10 ml of solutions andcan plate approximately 60 x 60 cm plate. This compact PromexPlating Machine is perfectly suitable for Jewelry, optical frames,watches, ornaments, accessories, small parts, or jewelrymaintenance and repair. 24K, 18K pen are also used for IC Base forrepairing purpose.(Optional Pens) Degeaser, Copper, Nickel, Chrome-Color, Black-Nickel, 24K Gold, 20K Gold,18K Gold,14K Gold, 12K Gold, PinkGold, Rhodium, 24K Gold (Rapid), 18K Gold (Rapid), Silver, Silver(Rapid), Stainless Steel Degreaser, Zinc, Tin, Palladium, Red Gold,Luna pink (No.1) Gold, Luna Pink (No.2) Gold, Luna Pink (No.3) Gold.
Item Code 502„006 502„007Product Name PROMEX Plating Machine Standard Set PROMEX Plating Machine Control Unit
Style Pen type plating machine
Weight / Dimensions 1.1 kg / 140 x 160 x 75 mm
Accessories Control unit, AC Adaptor, Connecting cable, Polishing paste
Pens Degreser, 18K Gold, Silver „
Silver
■
before after
K18 Gold
■
before after
IONIC CLEANER RESHINER 2.0■ FEATURES
This state„of„the„art unit makes oxidize coating on the surfaceof precious metal shine again. As using electrolytic process, you willnot lose precious metal or damage the gemstones. Simply dip theprecious metal in the special liquid and press the button!
Item Code 602„017Product Name Reshiner 2.0
Feature Reshining for Gold and Silver (remove oxdized)
Power supply AC100„230V 50/60Hz ±10%Lo.0.8A Mid.1.6A Hi.3.2A
Cleaning Time 10„30 Sec.
Weight 3 kg
Dimention 240 W x 200 D x 109 H mm
Option Special reshiner solution (Replacement)
STEAM CLEANER MRS-1■ FEATURES
Alfa Mirage introduces powerful steam cleaner for dirt which can notbe removed by an ultrasonic cleaner, surface oil content, persistentstain during jewelry making process.
Item Code 602„009Product Name Steam Cleaner MRS-1
Steam Pressure 5 kg/cm3
Tank capacity 4 L
Power 100 V / 1.5 kw
Weight / Dimensions 9.3 kg / 270 x 265 x 450 mm
Accessories Flexible hose(1m), Foot switch, Watertank, Ion plastic
STEAM CLEANER MRS-150α■ FEATURES
Steam cleaner generates the steam from“water”with high pressure.And it gives constant availability of steam and even tough dirt can beremoved in a moment. Cleaned surface would dry soon and easy togo on following processes. Pressure or steam amount can bemodified for each requirement. Tap water or deionized water can beused.
Item Code 602„019Product Name Steam Cleaner MRS-150α
Steam Pressure 3 to 6 kg/cm3
Tank capacity 8 L
Power Triple phase 200V / Max 6.6 kw
Weight / Dimensions 67 kg / 450 x 630 x 930 mm
Accessories Flexible hose(1.5m), Adjustable foot switch, Watertank, Ion plastic
Cleaning 28Cleaning 28
TORAYSEE MF GLOVES■ FEATURES
Traysee ultra fine fiber can wipe dust and oilaway, and keep your jewelry sparkling andclean. Good for handling the stones, jewelryand pearls.
Item Code 601„011 601„012 601„013
Product Name Toraysee MF Gloves
Size M L LL
Material Polyester ultra fine fiber
COTTON GLOVES■ FEATURES
Made of 100% cotton. Easy fit on your hands.
Item Code 601„032 601„014 601„015 601„057 601„067 601„066
Product Name Cotton Gloves Cotton Gloves(BLACK)
Size S M L LL M L
Material 100% Cotton
Content 12 pairs / pack
FINGER GLOVES■ FEATURES
Finger Gloves made of Rubber, Leather. Protect your fingers in working process.
Item Code 601„053 601„054 601„055 601„060 601„061 601„062 601„063 601„064 601„065601„065
Product Name Rubber Finger Guards Jewelry Rubber Finger Guards
Size Code A B C N„1 N„2 N„3 N„4 N„5 N„6
Inner Diameter(mm) 21.5 18.5 15.5 20 21.5 18.5 18.5 15.5 15.5
Length(mm) 52 46 40 70 55 70 55 61 52
Thickness(mm) 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5
Content 50 pcs / pack 20 pcs / pack
SOFT MICRO PRO„WIPE■ FEATURESHigh„absorbent and High„performancedisposable Wipe for Jewellry, Watch, Glassand Lens. Convenient and works well.
Item Code 601„093Product name Soft Micro PRO„WIPE SS250Material Pulp and PaperSize / Content 198 x 90 mm / 250 pcs per packQuantity 72 packs
NAIL POLISHING CLOTH NAIL HEART■ FEATURES
Available both Polish & Luster with thisreversible clothPolish(Pink) makes it possible to becomesmooth on the nails with polishing powder& Polish(Purple) makes shiny & Luster onthe nails with ultrafine particle.
Item Code 601„076Product Name Nail Polishing Cloth NAIL HEART
Content 6 pcs / pack
Size 50 x 50 mm(Heart Shape)
PLATINUM POLISHING CLOTH■ FEATURES
Polishing cloth for Platinum is the bestamong the others ever been made.Not only for removing the scratches butalso giving the luster on Platinum.
Item Code 601„042Product Name Platinum Polishing Cloth
Material Cotton cloth with polishing compound and wax
Size 125 x195 cm
POLISHING CLOTH POLIMALL■ FEATURES
Polishing cloth for Silver and Gold materials.Removing oxidation film, small scratchesand rust of the material. Also works well toremove small scrathes on surface of metalafter plated.
Item Code 601„016 601„018 601„017 601„019Product Name Polimall Blue Polimall Yellow
Content Single Double Single Double
Material Cotton cloth with polishing compound and wax
Dimensions 125 x 195 mm
Cleaning29 Cleaning29
POLISHING CLOTH SP SERIES■ FEATURES
Improved Polishing cloth designed for different types of materials.Each one of the one specially made with different compounds.
Item Code 601„049 601„068 601„048Product Name Gold SP Platinum SP Silver SP
Material Cotton cloth with polishing compound and wax
Content / Size 2 pcs / 125 x 195 mm
Item Code 601„050 601„051 601„052Product Name Copper SP Stainless SP Plastic SP
Material Cotton cloth with polishing compound and wax
Content / Size 2 pcs / 125 x 195 mm
HIGH QUALITY JEWELLRY CLOTH / BEADS POLISHING CLOTH■ FEATURESHigh quality Jewellery cloth: all types of Jewelry, glasses and watches. Micro fiber cloth wipes out oil easy. Washable and can be used for along time.Beads polishing cloth: not only for Beads, but for natural gem stones, corals, amber as well. it includes some silicon in microfiber cloth to makeit easy to remove oil or dirt.Item Code 601„044 601„075Product Name High Quality Jewellry Cloth Beads Polishing ClothMaterial Polyester 65%, Nylon 35% Polyester 100%Size 125 x 195 mm 195 x 250 mm
KASSOY DIAMOND CLOTH■ FEATURESHandy washable cloth surpasses the finestsilk is guaranteed to completely removedirt, lint and finger marks.
Item Code 601„040Product Name KASSOY Diamond ClothDimensions 22 x 22 mm
CHAMOIS CLOTH■ FEATURESHigh quality chamois leather cloth. Put intoultra fine fiber and press molded. Made fromall natural ingredients. Washable.
Item Code 601„006 601„007 601„008Product Name Chamois ClothDimensions 12 x 12 cm 12 x 18 cm 15 x 15 cm
ALFA CHAMOIS■ FEATURESReasonable chamois. Made from all naturalingredients. Washable.
Item Code 601„009Product Name Alfa Chamois
Dimensions 15 x 15 cm
SILVER CLEANER SPEEDIP■ FEATURESMost popular cleaning fluid for Silver andGold materials. Dip the object into the liquidfor 10 seconds, and the liquid will removethe oxidation on the surface.
Item Code 601„020 601„021 601„022Product Name Silver Cleaner SpeedipContent 20 g ( 100 pcs / Box.) 80 g 200 gCleaning Time 10 to 20 sec.
SILVER COATING LIQUID SILKEEP■ FEATURESThis liquid has antioxidant benefits to theSilver and Gold materials. Non„toxics.Shake well before use. Preferable to useafter the SPEEDIP. * Do not use beforeplating. * Degrease well the objectsbefore use.
Item Code 601„023 601„024Product Name Silver Coating Liquid SilkeepContent 80 g 200 gCleaning Time 2 to 3 min.
JEWELLERY CLEANER SUNCLEAN■ FEATURESSuitable for cleaning precious metals suchas Gold Silber and Platinum as well asstones.Just dip jewelry in a minute and rinse withwater. Use brash if the dirt is tough.Do not use for treated or colored gemstones, as well as amber.Item Code 601„010Product Name Jewellry Cleaner SuncleanContent 100 mlCleaning time 1 min.
Pearl tools & Equipment 30Pearl tools & Equipment 30
PEARL DRILLING MACHINE PDα„100 / 200
■ FEATURES
For drilling a hole in a pearl or round thing which has Mohs hardness of 5 or less.●Enhanced drilling accuracy ●Less stain to the motor extending operation life ●4.2kg compact body ●Motor replacement now possible atthe users’ end●Be able to drill a hole in bigger pearl up toφ35mm●Improved pearl chucks make replacement easier●Attachment containerincluded as the standard equipment ●Replacement High„speed drill, and Carbide drill bit are available
Item Code 701„003 701„004
Product Name Pearl Drilling Machine: PDα-100 / 200
Power Supply AC100 - 120 V 50 / 60 Hz AC200 - 240 V 50 / 60 Hz
Speed 6000 / 6500 rpm
Weight / Dimensions 4.2 kg / 145 x 235 x 122 mm
Accessories Chuck φ3, 5, 7, 9, 11 Drill bit (0.8, 1.0, 1.2mm) x 2 Adjustment wrench x 2
Option Chuck φ10 to φ34, Drill bit from 0.6mm „ 1.3 mm
PEARL SIEVES■ FEATURES
High quality Pearl Sieves. Very popular model in Japanese market.
Item Code 701„085 701„086 701„087 701„088
Product Name Pearl Sieves Frame
PLATE 1502-20 mm
(incrementof 0.25 mm)
PLATE 1902-20 mm
(incrementof 0.25 mm)
Diameter 150 mm 190 mm - -
* Custom sizes are available at your request.
PEARL COUNTER■ FEATURES
Very easy for counting Pearls. Save time and do not damage thepearls.
Item Code 701„089 701„090 701„091 701„092 701„093 701„094 701„095 701„096
Product Name Pearl Counter
Size 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm
Holes 100 holes 50 holes
* A counter can be used for 2-count smaller pearls.
Pearl tools & Equipment31 Pearl tools & Equipment31
PEARL THREAD“KING”■ FEATURES
Most popular polyester thread for pearl. Made in Japan.
Item Code 701„033 / 034 701„035 / 036 701„037 / 038 701„039 / 040Product Name King Polyester ThreadNumber / Color #8 (White / Black) #20 (White / Black) #30 (White / Black) #40 (White / Black)Length 1000 m 1000 m 2000 m 2000 mDiameter 0.46 - 0.74 mm less 0.46 mm 0.04 - 0.44 mm 0.35 - 0.40 mm
PEARL THREAD“GUNZE GPT”■ FEATURES
Highest quality thread made by high„density polyethylene.“Lighter than Water, Stronger than Iron, Sparkle like Silk”Verypopular for high„end Pearl and Jewelry manufacturers.
Item Code 701„054 701„055 701„056 701„057 701„058Product Name Gunze GPT ThreadNumber #10 #20 #30 #50 #80Length 1000 m 1000 m 1000 m 2000 m 2000 m
NEEDLE FOR PEARLItem Code 701„041 701„042 701„043Product Name Needle for Pearl
Product Number No.11 No.13 No.15
Length 70 mm 50 mm 40 mm
Diameter 0.4 mm
Content 25 pcs / pack
FLEXIBLE BEADING NEEDLE■ FEATURES
Flexible beading needle for Pearls, small beads. Unique design andvery easy to use.
Item Code 701„272 701„273 701„274Product Name Flexible Beading Needle
Length 6 cm 9 cm 10.5 cm
Diameter Approx. 0.3 mm
Content 3 pcs / pack
FRENCH WIRE■ FEATURES
French wire is to conceal beading wire next to crimps and clasps. Itgives not only jewelry an elegant, professionally finished look, butalso protecting and strength to the ends of the beadwork.
Item Code 701„141 701„142Product Name French wire
Color Silver Gold
Length 14 g approx. 800 cm
SILICONE RING FOR PEARL (MADE IN JAPAN)
Item Code 701„135 701„136 701„139 701„140 701„137 701„138Product Name Silicone Ring For Pearl
Color Black White Transparent
Size M (2 mm) L (2.5 mm) M (2 mm) L (2.5 mm) M (2 mm) L (2.5 mm)
Content 1000 pcs / pack
Pearl tools & Eqnipment 32Pearl tools & Eqnipment 32
PEARL SUPER SHINING CLOTH■ FEATURES
Microfiber cloth with natural vegetable oil wipes out dirt and bringsshining and luster greatly. Fine abrasives are added on the backsideof cloth which can be used for basic polish.
Item Code 701„275Product Name Pearl Super Shining Cloth
Material / Size Unwoven cloth, Natural vegetable oil, Fine abrasive /125 x 195 mm
Application Luster for pearl, Coral, Jade
PEARL POLISHING CLOTH
■ FEATURES
Micro fiber cloth with lusting integrant is the best to bring naturalluster to the pearls. It can be used not only for pearls but also fordelicate gems, like corals and jade. This cloth is not includedpolishing compounds.
Item Code 601„043
Product Name Pearl Polishing Cloth
Material Micro fiber silicon cloth
Size 160 x 220 mm
PEARL CLEANER■ FEATURES
Cleaner for Pearl, Coral Malachite, Ivory and Organic Jewelry. Justput the Jewelry in for 5 to 10 minutes and brush. Wash with waterafter cleaning.
Item Code 701„049 701„047Product Name Pearl Cleaner 20 g Pearl Cleaner 80 g
Content 20 g (100 pcs / case) 80 g
PEARL STICK GAUGE■ FEATURES
Works well for checking size or adjust prongs of Pearl mount settinginstead of real pearl to avoid damaging pearls before setting.
Item Code 701„113
Product Name Pearl Stick Gauge Set
Size φ7 to 16 mm (16 pcs set)
PETRI DISH
■ FEATURES
High transparence and no surface asperity Petri dish can be used fortray for gem stone, pearl and others.
Item Code 801„149 801„150 801„151 801„152 801„153
Product Name Petri Dish
Model Number 60 70 90A 90B 100
Diameter (ID) 59 / 66 mm 70 / 76 mm 85.5 / 93 mm 89 / 96.5 mm 98.5 / 106 mm
Pearl tools & Eqnipment33 Pearl tools & Eqnipment33
WIRE STOPPER (MADE IN JAPAN)
Item Code 701„079 701„080Product Name Wire Stopper
Color Gold (Gold plated) Silver (Rhodium plated)
Material Brass
Content 500 pcs
ATR (MADE IN JAPAN)■ FEATURESJust use screwdriver and clip at the end of Wire. Can re-adjust or re-use.
Item Code 701„081 701„114 701„082 701„115Product Name ATR A-TYPEColor Gold (Gold plated) Silver (Rhodium plated)Material BrassContent 10 pcs 100 pcs 10 pcs 100 pcs
PEARL LOOSE BAG■ FEATURESLoose bag with slide zipper and outside pocket. Japan made qualitybags with reasonable prices.* Please call for special sizes.
Item Code 701„097 701„098 701„099Product Name Pearl Loose Bag (with Zipper & Pocket)
Size 200 x 140 mm 160 x 100 mm 100 x 100 mm
Content 10 pcs / pack
NECKLACE / LOOSE BAG
Item Code 701„100 701„101
Product Name Necklace Bag Loose Bag
Size 260 x 70 mm 80 x 55 mm
Content 10 pcs / pack
NECKLACE PLASTIC CARDItem Code 701„102 701„103
Product Name Necklace Plastic Card
Size 215 x 120 mm 215 x 55 mm
PEARL PLASTIC CARDItem Code 701„104 701„105 701„106 701„107 701„108 701„109 701„110 701„111Product Name Pearl Plastic CardSize 215x120mm 225x50mm 125x50mm 40 x 30mmHoles 50holes 10pairs 5pairs 1hole 2holes 3holes 1hole 2holesHole size 13 mm 10 mm 13 mm
TAPE FOR PEARL CARD (MADE IN JAPAN)■ FEATURES
Proper adhesion never leaves Pearls sticky.
Item Code 701„050
Product Name Tape for Pearl Card
Size / Length 38 mm x 25 m
Pearl tools & Eqnipment 34Pearl tools & Eqnipment 34
COLOR CHARTSilver(701-059) White(701-060)
Black(701-061) Pink(701-062) NV Blue(701-063)
Green(701-064) Red(701-065) Purple(701-066)
Gold(701-067) Gold Brass(701-068) M-Light Gold(701-263)
M-Pearl Silver(701-264) M-Copper(701-265) M-Bronds(701-266)
CENFILL STAINLESS STEEL WIRE (MADE IN JAPAN)■ FEATURESHigh quality Stainless wire coated by Nylon. Each wire composed of7 strands and enough strength. Other diameter wires are alsoavailable. Please contact us for detail.
Product Name Cenfill Stainless Steel Wire (JAPAN)
Material Stainless Steel Wire (7 strands), Coated Nylon
Diameter 0.4 mm
Length 100 / 500 m roll
Color 14 colors
SILVER 925 / SHAPE„MEMORY WIRE■ FEATURES
925 Silver wire coated by Nylon, composed of 7 strands. Each rollcomes from weight of silver 625g/1000m (without nylon).Straight shape„memory wire made from nickel & titanium. It makesit possible natural carved necklace lines and twist or bend free.
Item Code 701„267 701„268 701„269 701„270 701„271Product name 925 Silver Wire (Nylon Coated) Shape„Memory WireDiameter 0.4 mm 0.5 mm 0.20 mm 0.22 mm 0.30 mmLength 10 m roll 30 m roll
SUPER GLUE■ FEATURES
Usable for metal, tile, glass, concrete, wood plastic and generalpurpose work.Alonalpha Jelly: No mixing required. Easy handling with Jelly typeglue.Quick 5: Mixing one tube resin, one tube of hardener. Quickhardening, strong bonding.Epoclear: Mixing transparence type.Fixed in clear color.
Item Code 801„004 801„005 801„006Product Name Alonalpha Jelly Quick 5 EpoclearContent 4 g 15 g set 15 g set
Hardening Time 10„20 sec.Set in 4 min.
Full bond 40 min.Set in 5 min.
Full bond 90 min.
ZIP BAGS■ FEATURES
Clear Zip Bags with white block which accepts pen or marker.Ask for other sizes and thickness.
Item Code 801„064 801„065 801„066 801„067 801„068 801„069 801„070 801„071 801„072 801„073Product Name 8A 8B 8C 8D 8E 8F 8G 8H 8I 8J
Length(mm) 70 85 100 120 140 170 200 240 280 340
Width(mm) 50 60 70 85 100 120 140 170 200 240
Thickness(mm) 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08
Others35 Others35
REPLICA GOLD BAR FOR DISPLAY■ FEATURES
Attractive display item mainly for Gold Shop, Jewellery Shop, andPawn Shop … etc. Weight 566 g with 24K plated surface attractscustomer’s attention surely.
Item Code 801„126
Product Name Replica Gold Bar for Display
Weight / Dimensions 566 g / 118(L) x 53(W) x 1.0(H) mm
Density 10.6 g/cm3
Material Antinomy alloy, 24K plated
HANDY BILL COUNTER■ FEATURES
Compact sophisticated Bill counter enough to carry around.
Item Code 801„022 801„023
Product Name Handy Bill Counter
Model Number AD100„02 AD100„01
Function Addition Addition / Batch mode
Maximum 100 bills / 150 bills (new) 120 bills / 180 bills (new)
Counts Up to 3,999 bills
Power Supply AA battery / AC adapter
Weight / Dimensions 430 g / 180 x 90 x 46 mm
SILVER CLAY KIT PMC3■ FEATURESYou can make silver accessories with this kit easily.PMC3 fires at a lower temperature (600℃). PMC3 shrinks less thanoriginal PMC, and is easier to manipulate than PMC+, and producesa finished piece with a stronger molecular bond than either PMC orPMC+.
Item Code 801„007Product Name Silver Clay Kit PMC3
Content
Silver clay PMC3, Burning pot, Solid fuel 30g, Tweezers,Wooden ring stick, Stainless brush, Abrasive paper,Polishing cloth, Polishing paste, Oxidizer solution, Moldingagent and silver wire
Option Refill silver clay (6.3g, 9g, 16g, 25g, 50g), Solid fuel,Book“Silver Accessory”
POLISHING PASTE GLANOL■ FEATURES
Polishing paste for precious metals. Finishpolish for Jewellry or remove the oxidationfilm on the surface.
Item Code 601„046
Product Name Polishing Paste Glanol
Content 100 g
Cleaning Method Wipe off with soft cloth
ANTI TARNISH PAPER“SILVER GUARD”■ FEATURES
Silver Guard firstly developed for protecthistorical remains from discoloration. Silverwill not change color by putting a piece ofSilver Guard paper. One paper will protect200 cubic cm of container for :6 months ina loosely sealed container, 12 months in airtight container, 24 months in a tightlysealed container.
Item Code 601„087Product Name Anti„Tarnish Paper Silver Guard 4X4
Content / Size 500 pcs per pack / 40 x 40 mm
Quantity 25 packs
PIERCE EARRING COAT■ FEATURES
Just apply it to Pierce earring. Then itprotect you from skin allergies.
Item Code 801„158
Product Name Pierce Earring Coat
Content 20 ml / 10 pcs pack
Others 36Others 36
UV COLOR COLOMEL■ FEATURESUV Color Enamels cured by UV Light in seconds. Kinds of Color( Black, White, Red, Pink, Green, Yellow, Clear, Blue, Emerald,Sapphire, Ruby, Citrine, Total 12 colors) are available and mixedfreely to make you own colors. High-Hardness surface enables bepolished, buffing etc.Curing Time:Natural Sunlight 10 „ 60 min.
UV Light 30 „ 90 sec.Item Code 801„101 801„102 801„103 801„104 801„105 801„106Product Name UV Color EnamelColor Black White Red Pink Green YellowContent 20 g
Item Code 801„107 801„108 801„154 801„155 801„156 801„157Product Name UV Color EnamelColor Clear Blue Emerald Sapphire Ruby CitrineContent 20 g
BOXEL■ FEATURESTwo Clear membranes hold your gemstones securely in place andmake them float inside the clear plastic case.
Item Code 801„003Product Name Boxel 1212TDimensions 39 x 39 x 17.8 mmInside Dimensions 18 x 18 x 9 mmMaterial Polyethylene resin
STORAGE CASE
■ FEATURES
Special films filled with inside whole case storages the loose stones,precious metal parts, watch etc which are easy breakable during thetransportation.Item Code 801„147 801„140 801„141Model Number F217664 F217651 F217652Dimensions φ 82 x 17 mm 300 x 75 x 25 mm 300 x 100 x 25 mm
Application Loose stone,Precious metal parts Necklace, Bracelet Watch, For other bigger items
BOOK: GEMSTONES QUALITY AND VALUE 1, 2, 3■ FEATURES
Books for all Jewelers. Available in English and Japanese.
Item Code 801„016 801„017 801„018
Product Name GemstonesVol. 1
GemstonesVol. 2
GemstonesVol. 3
BOOK: DIAMOND 200X SERIES■ FEATURES
Published once a year in December for latest Jeweler design andtrend.
Item Code 801„019Product Name DIAMOND 200X Series
CAMERA STAND CLOSEUP PHOTO■ FEATURESCamera stand for closeup photography. Adjustable height and angle,and compact, easy to carry.
Item Code 801„159Product Name Camera Stand Closeup Photo EZCO1Weight / Position 620 g / Lowest 130 mm, Highest 480 mm
Others37 Others37
ALFA Original Template: NO. 1 ALFA Original Template: NO. 2
ALFA ORIGINAL TEMPLATEItem Code 305-066 305-067
Product Name ALFA Original Template: NO. 1 ALFA Original Template: NO. 2
A-1 A-2 A-3
A-4
A-5
A-6
A-7 A-8 A-9
DESIGNERS TEMPLATE
LED LIGHT BOARD is useful for drawing.Refer to page 5
Recommend
A-10
A-11
Item Code Product No. Design
305„026 A-1 Marquis, Pear Shape (for Emeralds)
305„027 A-2 Heart, Square, Bucket Shape
305„028 A-3 Ring (half-round) Shape
305„029 A-4 Ring (wideband) Shape
305„030 A-5 Round Shape (for Diamond)
305„031 A-6 Ring Size
305„032 A-7 Ring & Stone - A (from upper side)
305„033 A-8 Ring & Stone - B (from upper side)
305„034 A-9 Metal Fitting Shape
305„035 A-10 Oval Shape (for Diamond)
305„080 A-11 Fancy cut
Watch tools 38Watch tools 38
MKS WATCH HOLDER VISE■ FEATURES
For holding watches when opening case, repair, changing parts etc.
Item Code 801„057
Product Name MKS Watch Holder Vise
Weight / Dimensions 270 g / 110 x 100 x 30 mm
MKS SUPER CASE OPENER■ FEATURES
Opening the watch case safely, especially for very hard tightened orslippy ones.* For ROREX watches, use with Rolex opener set.Item Code 801„054Product Name MKS Super Case OpenerWeight / Dimensions 3.4 kg / 220 x 160 x 110 mm
MKS HANDY CASE OPENERItem Code 801„056Product Name MKS Handy Case OpenerWeight / Dimensions 260 g / 50 x 150 x 30 mm
MKS ROLEX OPENER SET■ FEATURESFor Rolex watch case opener set.* Can be used along with Supper case opener.Item Code 801„055Product Name MKS ROLEX Opener SetContent 5 kinds (φ20.2, φ22.5, φ26.5, φ28.3, φ29.5)
MKS WATCH TOOL OPENER SET■ FEATURES
This watch opener set is for large facewatches. Opener for 60 mm(max) can fit ondesigners brand watches.
Item Code 801„160Product Name MKS Watch Tool Opener SetContent Case opener (upto 60 mm), Holder vise
WATCH OPENER■ FEATURES
Item Code 801„058 801„059 801„060 801„061
Product Name Watch Opener 01 Watch Opener 02
End Size 19 mm 9 mm 9 mm 4 mm
MKS WATCH SCREWDRIVERS SET■ FEATURES
Including 5 or 10 precision flat„blade screwdrivers which arecolor„coded for easy identification.Set of 5 includes: 0.7, 1.0, 1.4, 1.6, 2.0 mmSet of 10 includes: 0.5, 0.6, 0.7, 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0 mmItem Code 801„083 801„084
Product Name MKS WatchScrewdrivers Set Of 10
MKS WatchScrewdrivers Set Of 5
Content 0.5, 0.6, 0.7, 0.8, 1.0,1.2, 1.4, 1.6, 1.8, 2.0 mm 0.7, 1.0, 1.4, 1.6, 2.0 mm