online auction - vihn.netpmi.vihn.net/auction/files/5_1000000263_multi location online only...
TRANSCRIPT
HUGE ONLINE AUCTION – (14) LOCATIONS IN KENTUCKY, ARKANSAS & TEXASUNUSED CNC VERTICAL MACHINING CENTERS • UNUSED BAR FEEDER • WIDE SELECTION CNC & MANUAL MACHINE TOOLS • LARGE CAPACITY
GRINDER & PLANER • ELECTRICAL DISCHARGE MACHINE • UNUSED ROBOT ARM • LARGE CAPACITY FAB EQUIPMENT • UNUSED PRESSURE GAUGES & THERMOMETERS • (32) FORKLIFTS UP TO 52,000-LB. • 30 T. MOBILE CRANE • SPOTTER TRUCK • TRUCK TRACTOR • TRAILER • TOW TRACTORS
• 80' W. X 275' L. X 26' CTR. HT. METAL BUILDING TO BE SOLD FOR REMOVAL • OVERHEAD BRIDGE CRANES • MUCH MORE
Read Partial Terms and Conditions on Back Page of Brochure
ONLINE AUCTION
Headquarters:1304 Langham Creek Drive, Suite 454
Houston, Texas 77084
FAX: (713) 672-7905PHONE: (713) 691-4401
E-MAIL: [email protected]: www.pmi-auction.com
Ron Moore, TX Lic. #7314
HOUSTON • DALLAS • ST. LOUIS
Sale Conducted By:
SALE DATE: BIDS START CLOSING ON WEDNESDAY,
JULY 15 AT 10:00 A.M.INSPECTION:
Tuesday, July 14, 9:00 A.M. to 3:00 P.M. or By Appointment
ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING
AT THIS AUCTION. Go to www.pmi-auction.com and click on
on ourcalendar page for this auction sale.
FORCE ONE MDL. EVL12M 49" TABLE VERTICAL TURNING LATHE
HERKULES WETZLAR 8" X 8" X 1" HORIZONTAL ANGLE BENDING ROLL
ROMI MDL. M-27 CNC COMBINATION LATHE
MATTISON 84" VERTICAL ROTARY SURFACE GRINDER
FREIGHTLINER TRUCK TRACTOR & LANDOLL TRAILER
80' W. X 275' L. BOLT TOGETHER METAL BUILDING
TAYLOR 52,000-LB. CAP. DIESEL FORKLIFT
CNC
CNC
FINN POWER MDLL F5-25 TURRET PUNCH
CNC
UNUSED 2007 115 HP
WITH MILLING
LARGE
CAPACITY
LARGE
CAPACITY
FOR
REMOVAL
18% BUYER’S PREMIUM WILL APPLY
2 3
>YASKAWA
MOTOMAN 6-AXIS ROBOT ARM
UNUSED CNC VERTICAL TURRET LATHESFORCE ONE MDL. EVL12M, unused, milling, full C-axis, 49.21" tbl., 62.99 max. swing, 62.99 max. turning dia., 45.27" max. turning height, 12-position ATC, Cat 50, Fanuc Oi-TD control, under pwr.FORCE ONE MDL. EVL10, unused, 40" tbl., 55" max. swing, 40" max. turning dia., 48.9" max. turning height, 12-position ATC, Cat 50, Fanuc Oi-TD control, under pwr.
UNUSED BAR FEEDEREDGE TECHNOLOGIES (IEMCA) MINUTEMAN 320 AUTOMATIC MAGAZINE STYLE, 12'5" bar length, 1/8"–3/4" bar dia., feeds: square, round, hex bar stock, holds 10 linear inches, forward feed rate: 600mm/sec, Mitsubishi controller and servo drives w/remote pendant.
CNC ROBOT ARMYASKAWA MOTOMAN 6-AXIS MDL. HP20D, Unused, 20 kg. Payload, 1,717 mm hz. Reach, 3,063 mm vert. Reach, +-0.06 repeatability, Mdl. DX100 CNC Controller w/Win-dows CE programming pendant w/color touch screen and USB interface, 4-drawer parts storage unit.
FORCE ONE MDL. EVL12M 49" TABLE VERTICAL TURNING LATHE
EDGE TECHNOLOGIES MINUTEMAN 320 AUTO. BAR FEED
18% BUYER’S PREMIUM WILL APPLY
SALE DATE:BIDS START CLOSING
ON WEDNESDAY, JULY 15 AT 10:00 A.M.
INSPECTION Tuesday, July 14,
9:00 A.M. to 3:00 P.M. or
By Appointment
ONLINE AUCTION
LOCATION AAt the Premises
SAM HOUSTON BUSINESS PARK STORAGE FACILITY
10010 Houston Oaks Drive, Houston, Texas 77064INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M.
or By Appointment, Call (713) 818-7441
ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE
BIDDING AT THIS AUCTION. Go to www.pmi-auction.com and click on
on ourcalendar page for this auction sale.
CNC
FORCE ONE MDL. EVL10 40" TABLE VERTICAL TURNING LATHE
CNC
UNUSED
UNUSED
UNUSED
UNUSED
CNC
WITH
MILLING
2 3
CINCINNATI MILACRON MDL. HPC-630XT CNC HORIZONTAL MACHINING CENTER
LOCATION BAt the Premises RAFAEL GONZALEZ
STORAGE WAREHOUSE6720 Mayfair Street, Bldg. C
Houston, Texas 77087INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M.
or By Appointment, Call Ron B. (713) 691-4401
LOCATION CStored at the Premises
NEAR DOWNTOWN HOUSTON WAREHOUSE3609 Clinton, Houston, Texas 77020
INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M. or By Appointment, Call Linda Brandino (713) 462-5800
LOCATION DSurplus to the Ongoing Operations of
UNITRA, INC.12601 Exchange Drive, Stafford, Texas 77477
INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M. or By Appointment (281) 240-1500
CNCROMI MDL. M-27 CNC COMBINATION LATHE
CNC LATHEROMI MDL. M-27 27" x 80" COMBINATION CNC LATHE, new 2007, equipped w/GE Fanuc 21i-T CNC control, 21" 4-jaw chuck w/7" hole, sw. over bed 26.97", sw. over cross slide 16.93", 80" center, 21.26" sw. over carriage, X-travel 18.7", 15" bed, 6.7" through hole, spndl. RPM 2–1,000, quill dia. 2.36", S/N 002-093292-405.
CNC HORIZONTAL MACHINING CENTERSCINCINNATI MILACRON MAGNUM MDL. 800, new 1995, Acramatic 950 CNC control, 51" X-axis travel, 43" Y-axis travel, 44" Z-axis travel, 360 deg. B rotary-axis, 50 HP spndl., 6,500 RPM, CAT-50, (4) pallets, 31.5" x 31.5" pallet size, 3,000-lb. cap., 90-pos. ATC, high pressure CTS, chip conveyor, S/N 3144A0195-0026.CINCINNATI MILACRON MDL. HPC-630XT, new 1999, Acramatic A-950 CNC control, 40.4" X-axis travel, 31.5" Y-axis travel, 31.5" Z-axis travel, 360 deg. B ro-tary-axis, 27 HP spndl., 7,000 RPM, CAT-50, (2) pallets, 24.8" x 24.8" pallet size, 3,000-lb. cap., 80-pos. ATC, high pressure CTS, chip conveyor, S/N KB00D03990012.
CNC VERTICAL MACHINING CENTERFADAL MDL. 3020, new 2000, 3-axis, Siemens CNC control, 20" x 40" T-slotted tbl., travels: 30" X, 20" Y, 20" Z, variable spndl. spds. up to 10,000 RPM, Cat 40 spndl. taper, (21) tool ATC, full enclosure, RS232 port, pendant control, 15 HP, SEE VIDEO.
2007
CNCCNC
1999
2000
4 5
LAGUN MDL. FTV-3L VERTICAL TURRET MILL
LAGUN MDL. FTV-2 VERTICAL TURRET MILL
BRIDGEPORT 9" X 48" SERIES I VERTICAL TURRET MILL
TOOLMEX 26" X 120" ENGINE LATHE
MORI SEIKI MDL. MV40 VERTICAL MACHINING CENTER
GENSPARK AMERICA MDL. CY38 E.D.M.
LOCATION ESurplus to the Ongoing Operations of
GODWIN-SBO28825 Highway Blvd., Katy, Texas 77494INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M.
ZNC SINKER TYPE EDM MACHINE
GENSPARK AMERICA MDL. CY38, new 2004, 15-1/2" x 24" x 38" max. work-piece, programmable Z-axis, 15-3/4" Y-axis travel, 11-13/16" Z-axis travel, 9" Z-axis sliding column, 7" electrode cap., 75 amp, outboard filtration unit, S/N 77.
CNC VERTICAL MACHINING CENTER
MORI SEIKI MDL. MV40, Fanuc 10M CNC control, 18" x 43" tbl., 31.5" X-axis travel, 16" Y-axis travel, 20" Z-axis travel, wired for 4th-axis, 8" dia. 6-jaw chuck, 20-pos. ATC (not operational), CAT-40, 3 ph., 220 v., 60 Hz, 24.6 KVA, Mfg. No. 1372.
VERTICAL MILLING MACHINES
LAGUN MDL. FTV-3L, 10 x 50 tbl., R8 spndl., servo pwr. feed, pwr. knee, wired for D.R.O., 4,200 max. RPM, 3 HP motor, S/N SE37474.
LAGUN MDL. FTV-2, 10 x 50 tbl., pwr. feed on tbl. and feed, R8 spndl., Kool Mist, Lagun powerfeed, wired for D.R.O., Accu-Rite scale on Z and Y, pwr. in X and Y, 4,200 max. RPM, 2 HP motor, S/N SE36927.
BRIDGEPORT SERIES I, 9 x 48 tbl., pwr. feed, Kool Mist, spndl. spds.: 140–4,200 RPM, wired for D.R.O., 2 HP cont, 3 HP for 30 min. intermittently, S/N BR258937.
ENGINE LATHETOOLMEX 26" X 120" MDL. TUR630A, (2) 15.5" 4-jaw chucks w/5.5" hole, 15" dia. roller steadyrest, taper attach., 230 v., 60 Hz, 52 amp, spds.: 15–1,400 RPM, 20 HP motor, inch/metric thdng., no tailstock, S/N 50845.
18% BUYER’S PREMIUM WILL APPLY
CNC
2004
ZNC
4 5
<FREIGHTLINER TRUCK TRACTOR & LANDOLL TRAILER
KINGSTON 34" X 197" ENGINE LATHE
>GROVE
30 T. CAP. MOBILE CRANE
ROCKFORD 60" X 217" OPEN SIDE PLANER
ROCKFORD 24" HYDRAULIC SLOTTER
V&O 43 T. CAP. PUNCH PRESS
CLEARING TORC-PAC OBI PUNCH PRESS
MATTISON 84" VERTICAL ROTARY SURFACE GRINDER
VERTICAL ROTARY SURFACE GRINDER
MATTISON 84", 84" chuck, 96" sw. inside tbl. guards, 42" seg-mented wheel, 115 HP motor, approx. 36" max. height under wheel, variable neutrofier variable magnetic controls, external coolant tank and pump, pendant control, eqpd. w/large selec-tion of assorted grinding stones, S/N 60-22.
PUNCH PRESSV&O 43 T. CAP. MDL. 4, 4" stroke, 4" adj., 33" R-L x 20' F-B bed area, air clutch and brake, dual palm button controls, S/N 4W-44.
OBI PUNCH PRESSCLEARING TORC-PAC 45 T. CAP., 4" stroke, 12" shut ht., 2-1/2" adj., 90 SPM, 28" R-L x 18" F-B bed area, air clutch and brake, dual palm button control station, S/N 57-7250.
GAP BED ENGINE LATHEKINGSTON 34" x 196.9" MDL. HR5000, new 1981, 34" sw. over bed, 24" sw. over crosslide, 196.9" btwn. centers, 4.15" spndl. hole, spds.: 8–800 RPM, 20 HP spndl., inch/metric thdng., taper attach., (2) steadyrests, S/N 05691021.
MAZAK 18" x 80" REX GAP BED, 18" sw. over bed, 80" dist. btwn. centers, spds.: 25–1,500 RPM, 2.15" spndl. hole, inch/metric thdng., S/N 16072.
OPEN SIDE PLANNERROCKFORD 60" x 217", 60" x 217" tbl., (2) airlift rail heads, (1) airlift side head, approx. 84" arm extension, approx. 60" ht. under rail, 60 HP hyd. drive system.
HYDRAULIC SLOTTERROCKFORD 24", 42" built-in rotary tbl., S/N 89SA70.
MOBILE CRANEGROVE 30 T. CAP., 4-section hyd. boom, mtd. to 3-wheel cushion tire crane unit w/extendable counterweight, 30 T. cap. block, hyd. counterweight extension, Gearmatic hoist unit.
TRUCK TRACTORFREIGHTLINER, new 2002, double axle, Cummins ISM 330 engine, 400 HP, lift axle w/super singles, ODO: 400,000 miles, VIN 1FUBA68802LK04935.
LOCATION FSurplus to the Ongoing Operations of
HANCOCK MECHANICAL SERVICES
4427 Bishop LaneLouisville, Kentucky 40213
INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M. or By Appointment, Call (502) 452-1596
TRAILERLANDOLL HAUL-ALL, new 1997, 77,000-lb. G.V.W.R., all axles, bar grate steel deck w/extra reinforcement, Braden winch, rebuilt hydraulics, VIN 1LH17AUH21008902.
115 HP
LARGECAPACITY
LONG BED
6 7
LOCATION ISurplus to the Operations of
LEADER GASKET TECHNOLOGIES
905 W. 13th Street Deer Park, Texas 77536INSPECTION: Tuesday, July 14,
from 9:00 A.M. to 3:00 P.M. or By Appointment (225) 275-8000
HERKULES WETZLAR 8" X 8" X 1" HORIZONTALANGLE BENDING ROLL
WYSONG 12 FT. CAP. PLATE SHEAR
LOCATION GSurplus to the Ongoing Operations of
HAMMONDS TECHNICAL SERVICES, INC.910 Rankin Road
Houston, Texas 77073INSPECTION: Tuesday, July 14,
9:00 A.M. to 3:00 P.M.
HORIZONTAL ANGLE BENDING ROLL
HERKULES WETZLAR 8" X 8" X 1", Mdl. BO-234K1, 13'-2" x 8' x 78" ht. approx. dims., capacities in mild steel: 8" x 8" x 1" angles (leg out), 6" x 6" x 1" angles (leg in), 8" x 7" tees (web out and web in), 9" x 7.5" tees (foot on edge), 18" x 7.5" beams on flanges, 17" x 4" channels (flanges out and flanges in), 14" x 2.5" flats on flat; 8" x 1-5/8" flats on edge; 4-3/4" x 4-3/4" squares, spds.: 13, 21, 33, 56 FPM, 40 HP motor.
LARGE
CAPACITY
MISCELLANEOUS EQUIPMENT
FEMCO 250 T. CAP. 4-POST HYDRAU-LIC PRESS, no visible I.D. plate, UNDER POWER, S/N N.A.WYSONG 12 FT. W. CAP. PLATE SHEAR, no visible I.D. plate (requires repair).KING 54" VERTICAL TURRET MILL, S/N 20073 (requires repair).ATLAS COPCO MDL. GA50VSDFF AIR COMPRESSOR (requires repair).YALE MDL. OSO30EAN24TEO95 ELEC-TRIC ORDER PICKER, S/N 801N06267T, (requires repair).
ATLAS COPCO AIR COMPRESSOR
KING 54" VERTICAL TURRET MILL
FEMCO 250 T. CAP. HYDRAULIC PRESS
6 7
CNC TURRET PUNCHFINN POWER MDL. F5-25, new 1996, Siemens 840D CNC control, 100" X-axis travel, 50" Y-axis travel, hyd. punch stroke, pneu. clamping, 21-station turret, 3.5" max. punch size, (3) tool clamps, 5/16" max. thickness, 3,940 IPM traversing spd., Jet Cam software, S/N 9.1-F52559296 (disassembled).
ROTARY SHOT BLAST TUMBLER
JET MDL. MT-6B, 400 v., 3 ph., 3,600 RPM, 15 HP mo-tor, variable spd. rotation, tilting drum, cycle timer, dust collector and shaker, 4,845.1 H.O.M., S/N N.A.
WIRE EDM MACHINE
JAPAX MDL. LDM-35, new 1989, 10" x 12" x 12" approx. cap., Dielectric coolant unit, numeric control unit, S/N 174-03-069.
CENTRIFUGAL AIR COMPRESSOR
INGERSOLL RAND, new 1993, 1,087 SCFM @ 125 PSIG, 2,300 v., 3 ph., 77.6 amp, Siemens 350 HP main motor, auto. dual con-trol, water cooled, microcon-troller computer (has never been under power).
CNC VERTICAL MACHINING
CENTERACROLOC MDL. AF-15-40/OMC, Fanuc OM CNC control, 16" x 46" table, 40" X-axis travel, 24" Y-axis travel, 30" Z-axis trav-el, 230 v., 3 ph., 48 amp AC mo-tor, 6,000 RPM, 15 HP spdl. mo-tor, programmable head.
JAPAX MDL. LDM-35 WIRE EDM MACHINE TROYKE CNC ROTARY TABLE
<SANBORN COOLANT RECOVERY SYSTEM
INGERSOLL RAND CENTRIFUGAL AIR COMPRESSOR
>JET ROTARY SHOT BLAST
TUMBLER
LOCATION JSurplus to the Operations of
CURTIS SORRELLS2845 River Road East
Van Buren, Arkansas 72956INSPECTION: Tuesday, July 14 from 9:00 A.M.
to 3:00 P.M., or By Appointment (479) 414-2043
FINN POWER MDL. F5-25 TURRET PUNCH
CNC
CINCINATTI MILLICRON MDL. 750 VERTICAL MACHINING CENTER
CNCBROTHER MDL. TC-217 CNC DRILLING AND TAPPING CENTER
CNCKITAMURA CNC MACHINING CENTER
CNC
CNC DRILLING & TAPPING CENTERBROTHER MDL. TC-217, new 1991, Brother 520 CNC control, 11.8" X-axis travel, 8.6" Y-axis travel, 7.8" Z-axis travel, 7.87" to 15.74" table to spdl., 8.66" to 19.68" table to surface, 208/230 v., 3 ph., 10-pos. ATC, S/N 111292.
COOLANT RECOVERY SYSTEMSANBORN MDL. SJ-700 PATRIOT 1, 9' x 9' x 7' overall dims., 120 GPH, 40 amp, 480 v., 3 ph., 60 Hz, S/N MR97-1161/87-003.
CNC VERT. MACHINING CENTERSKITAMURA MDL. MYCENTER 1B, Fanuc 10M CNC control, 12" x 27" table, 21" max. dist. from spdl. to table, 18" X-axis travel, 12" Y-axis travel, 16" Z-axis travel, spdl. spds.: 150–10,000 RPM, S/N 01745.KITAMURA MDL. MYCENTER 1, Yasnac I80M CNC control, 14" x 31" table, 20" X-axis travel, 14" Y-axis travel, 16" Z-axis travel, spdl. spds.: 150–13,000 RPM, 7.5 HP motor, 20-pos. ATC, 21" dist. from table to spdl. nose, 21.9" dist. from column to table center, oil cooler, manual pallet changer, BT-35 tooling.CINCINNATI MILACRON MDL. ARROW 750, new 1994, CT-FNC-3500 CNC control, 36" x 20" table, 30" X-axis travel, 20" Y-axis travel, 20" Z-axis travel, 25" spdl. to worktable, 22-1/4" throat depth, 5.9" dia. x 3.9" spdl., spdl. spds.: 60–6000 RPM, 10 HP motor, 21-pos. ATC, No. 40 taper, wired for 4th axis, S/N 7043-C00-94-0041.
CNC ROTARY TABLETROYKE, General Numeric CNC control.
8 9
LOCATION KFormer Location of
CES ENVIRONMENTAL SERVICES
4904 Griggs Road, Houston, Texas 77021INSPECTION: Tuesday, July 14,
9:00 A.M. to 3:00 P.M. or Call for Appointment
(936) 494-8338
METAL BUILDING BEING SOLD FOR REMOVALBOLT TOGETHER CONSTRUCTION, 275'L. x 80'W. x 26' center ht., 24' eave ht., (7) roll-up doors, (3) man doors, insulated ceiling, lighted, sky lights.
LOCATION LStored on Behalf of the Seller at
PLANT & MACHINERY, INC.1304 Langham Creek Drive, Suite 454
Houston, Texas 77084INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M.
UNUSED PRESSURE GAUGES(Approx. 25) MARSHALLTOWN, 2.0", 23KT, 0/30 PSI, 1/4" bottom connection, Part No. G29706.
(Approx. 19) MARSHALLTOWN, 2.0", 300, 400, 600 KPA, 1/4" bottom connection, Part No.’s J1464, J1460, J1158, G14425.
(Approx. 19) MARSHALLTOWN, 2.0", 23B, 0/30+200 KPA, back connection, Part No. J2642.
(Approx. 17) MARSHALLTOWN, 2.0", 1.50/200 PSI/1400 KPA, 1/8" back connection, Part No.’s J1854, J0654.
(Approx. 20) MARSHALLTOWN, 2.0", 23B, 23 KC, 0/200 PSI 1400, 700 KPA, back connection, Part No.’s J2654, J248.
(Approx. 15) MARSHALLTOWN, 2.0", 23B, 0/30 PSI, 0/300 PSI, 0/600 PSI, 1/8" and 1/4" back connection, Part No.’s G10046, G10873.
(Approx. 15) MARSHALLTOWN, 4.5", 403, 0/60 PSI, 1/4" bottom connection, Part No.’s P5146, G28840.
(Approx. 13) MARSHALLTOWN, 2.5", 117C, 0/60 KPA, 1/4" back connection, Part No.’s Y2026, G10350.
(Approx. 4) MARSHALLTOWN, 4.5" PROC, 1/4 NPT, 0/100 PSI, bottom con-nection, Part No.’s 95007340, P5148.
(Approx. 23) MARSHALLTOWN, 2.0", 23 KT, 0/30 PSI, 1/4" bottom connec-tion, Part No. G29706.
(Approx. 26) WILSHER CO., 2.0" 6/30 PSI, 0/200 KPA, 1/4" bottom connec-tion, Part No. W29799.
(Approx. 26) WILSHER CO., 2.0", 0/30 PSI, 0/200 KPA, 1/4" bottom con-nection, Part No. W29799.
(Approx. 13) ABCO, 2.5–4.0", 0–30 up to 0–10,000 PSI, 1/4" and 1/2" NPT, SS, bottom and back connections.
(Approx. 8) MARSHALLTOWN, 4-1/2" fic. 177F–5,000-lb. and KPA-1/2 back connection.
(Approx. 14) MARSHALLTOWN, 3.5" 88B, 3/15 PSI, 1/4" back connection, Part No. G27281.
(Approx. 13) – (5) MARSHALLTOWN, 2.5", 58KB, 1/8 NPT, 30 X 300" HGX PSI, Part No. G27896; (8) MAR-SHALLTOWN, 2-1/2" fig., 0-30 PSI, ammonia steel case 1/4" bottom con-nection.
(Approx. 19) – (17) MARSHALLTOWN, 2" fig. 0–300 PSI, Merlon plastic case, 1/8" bottom connection, Part No. G14341; (2) MARSHALL-TOWN, 2-1/2", 138B, 30" x 150, R-12 black steel case, 1/8 NPT, Part No. G26271.
(Approx. 30) – (18) MARSHALLTOWN, 2" fig., 0–160#, Merlon plastic case, 1/8" connection; (12) MARSHALLTOWN, 2" fig., 0–300 PSI, 1/8" NPT, Merlon case, back connection.
BIMETAL THERMOMETERS(Approx 9) REOTEMP, 3.0", Mdl.’s A and L, 4", 6" and 9" stems, 0–250 F., 0–550 F., 1/2, 1-1/2 NPT, Part No. AA090D69.
(Approx. 9) ABCO AND REOTEMP, 3.0–5.0", 0–550 F, 0–250 F, 0–140 C, 0–90 C, 4", 6", 9" and 12" stems, SS.
18% BUYER’S PREMIUM WILL APPLY
SALE DATE:BIDS START CLOSING
ON WEDNESDAY, JULY 15 AT 10:00 A.M.
INSPECTION Tuesday, July 14,
9:00 A.M. to 3:00 P.M. or
By Appointment
ONLINE AUCTION
FOR
REMOVAL
UNUSED
8 9
DIESEL FORKLIFTSTAYLOR 52,000-LB. CAP. MDL. TC520, new 1989, diesel engine, 99" lift ht., 120" lift, 8' forks, fork positioner, cushion tires, S/N S-D1-19942.DOOSAN 36,000-LB. CAP. MDL. D16S-5, new 2009, 15'5" lowered mast, 17'3" raised mast, sideshifting individual fork positioners, 120" forks, cold air AC and heat, 12,582 H.O.M., S/N LQ-0317.ROYAL 36,000-LB. CAP. MDL. P360H, new 2002, diesel engine, 36,000-lb. @ 3' L.C., 142/168 standard mast, dual drive pneu., fork positioner, S/N L1030.CATERPILLAR 26,500-LB. CAP. MDL. P26500, new 2008, diesel engine, 26,500-lb. @ 2' L.C., 157 standard mast, dual drive pneu., side shift, fork po-sitioner, S/N 37A-10059.DOOSAN 11,500-LB. CAP. MDL. D50C-5, new 2011, diesel engine, 114/157 standard mast SS, dual drive pneu., 5,886 H.O.M., S/N FDB04-1240-01968.KOMATSU 8,000-LB. CAP., Mdl. FD40ZT-5, diesel engine, 110" 2-stage mast 159" lift height, dual drive pneumatic tires, 42" forks, S/N 11084A.
CATERPILLAR 5,000-LB. CAP. MDL. P5000, new 2004, diesel engine, 162 standard mast, pneu. tires, S/N AT18C00380.
SIDE LOADER FORKLIFTBAUMANN 13,000-LB. CAP. MDL. AS-60-14-40, new 1997, Perkins diesel, 113" lowered mast, 127" raised mast, 1,866 H.O.M., S/N 4648.
BAUMANN 13,000-LB. CAP. SIDE LOADER FORKLIFT
LOCATION MAt the Premises
DALLAS AREA STORAGE FACILITY2120 North Loop 12
Irving (Dallas Area), Texas 75061INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M.
or By Appointment, Call (972) 438-5438
TAYLOR 52,000-LB. CAP. DIESEL FORKLIFT
LARGE
CAPACITY
CATERPILLAR 26,500-LB. CAP. DIESEL FORKLIFT
2008
DOOSAN 36,000-LB. CAP. DIESEL FORKLIFT
2009
$75.00 LOADING CHARGE PER ITEM AT THIS LOCATION
(EXCLUDING TAYLOR 52,000-LB. CAP.)
ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR
ONLINE BIDDING AT THIS AUCTION. Go to www.pmi-auction.com and click on
on ourcalendar page for this auction sale.
10 11
DOOSAN 11,500-LB. CAP. DIESEL FORKLIFT
CAPTION TO COME
ROYAL 36,000-LB. CAP DIESEL FORKLIFT
OTTAWA MDL. YT30 SPOTTER TRUCK
CAPTION TO COME
CAPTION TO COME
CAPTION TO COME
CLARK 10,000-LB. CAP. LPG FORKLIFT
LOCATION M, CONTINUEDAt the Premises
DALLAS AREA STORAGE FACILITY
2120 North Loop 12 Irving (Dallas
Area), Texas 75061INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M. or By Appt. Call (972) 438-5438
LPG FORKLIFTSCLARK 10,000-LB. CAP. MDL. C50SL, new 2010, LPG engine, 114/240 triple stage mast SS, dual drive pneu. 3,289 H.O.M., S/N P455L-0131-9784KF.
HYSTER 8,000-LB. CAP. MDL. E80XL, new 2005, 83" triple-stage mast, 170" lift ht., cushion tires, 48 v. battery, 1,856 H.O.M, S/N C098N03565C.
CATERPILLAR 6,000-LB. CAP. MDL. P6000, new 2007, LPG engine, 83" standard mast, 130" lift ht., 42" forks, side shift, pneu. tires, S/N AT13F10567.
DAEWOO 5,000-LB. CAP. MDL. G25S, new 1997, LPG engine, 83" triple-stage mast, 189" lift ht., 42" forks, pneu. tires, side shift, S/N 10-0172.
(2) YALE 5,000-LB. CAP. MDL. GLC050VX NGSE094, new 2005, LPG engine, 94" triple-stage mast, 225" lift ht., 42" forks, cushion tires, side shift, S/N A910V3971C, S/N A910V3987C.
YALE 5,000-LB. CAP. MDL. GLC050TGNUAQ084, new 1999, LPG engine, 83" quad mast, 252" lift ht., 42" forks, cushion tires, side shift, S/N E187V10650W.
CATERPILLAR 3,000-LB. CAP. MDL. GC15, new 1997, LPG engine, 83" triple-stage mast, 189" lift ht., 42" forks, S/N 2EM04478.
ELECTRIC FORKLIFTSYALE 5,000-LB. CAP. MDL. EFC050GHN 36 TE084, new 2007, 84" triple-stage mast, 192" lift ht., 42" forks, 36 v. battery, side shift, 5,214 H.O.M., S/N A908N07518E.
YALE 5,000-LB. CAP. MDL. ERC050GHN36 TE088, new 2007, 88" triple-stage mast, 204" lift ht., 42" forks, 36 v. battery, side shift, 4,638 H.O.M., S/N A908N06502E.YALE 3,500-LB. CAP. MDL. ESC035 FAN 36T082, new 2005, 82" triple-stage mast, 189" lift height, 42" forks, 36 v. battery, cushion tires, side shift, 3,755 H.O.M., S/N A883N02397C.YALE 3,500-LB. CAP. MDL. NR035ADNL36TE107, new 2000, 107" triple-stage mast, 240" lift ht., 42" forks, 36 v. battery, side shift, 1,471 H.O.M., S/N B815N03715X.YALE 3,000-LB. CAP. MDL. OS030EBN 24TE095, new 1999, 95" triple-stage mast, 210" lift ht., 24 v. battery, 4,338 H.O.M., S/N B801N01552W.CATERPILLAR 2,200-LB. CAP. MDL. SF2200-90325560-2009, 77/60 fork over straddle, 600 H.O.M.
ELECTRIC PALLET JACKS(2) YALE 4,000-LB. CAP. MDL. MPB040EN24T2748, new 2008 and 2010, 24 v. battery, 27 x 48, S/N B827N40452–455 H.O.M. (2010), S/N B827N-31153F–475 H.O.M. (2008).
SPOTTER TRUCKOTTAWA MDL. YT30, new 1991, Cummins diesel engine, 106" wheel base, 10,225 H.O.M., S/N 65845-1-91.
TOW TRACTORS(2) UNITED 3,400-LB. CAP. MDL. SM340F-5, S/N 17038, S/N 16218.
20112010
$75.00 LOADING CHARGE PER ITEM AT THIS LOCATION
10 11
CATERPILLAR 8,000-LB. CAP. DIESEL FORKLIFT
CATERPILLAR 22,500-LB. CAP. GASOLINE FORKLIFT
CATERPILLAR 8,000-LB. CAP. DIESEL FORKLIFT
MITSUBISHI 11,000-LB. CAP. DIESEL FORKLIFT
CATERPILLAR 5,000-LB. CAP. DIESEL FORKLIFT
TOYOTA 8,000-LB. CAP. DIESEL FORKLIFT
YALE 8,000-LB. CAP. LPG FORKLIFT
YALE 8,000-LB. CAP. MDL. GLC080LINGAE092, new 2005, LPG engine, 92" triple-stage mast, 185" lift ht., 42" forks, cushion tires, side shift, S/N D818V02279C.
TOYOTA 7,000-LB. CAP. MDL. 8FGCU32, new 2012, LPG engine, 88" triple-stage mast, 187" lift ht., 42" forks, cushion tires, side shift, S/N 17414.
YALE 5,000-LB. CAP. MDL. GLC050VXNVSE085, new 2006, LPG engine, 85" triple-stage mast, 195" lift ht., 42" forks, cushion tires, side shift, S/N A910V06530D.
TOYOTA 7,000-LB. CAP. LPG FORKLIFT
LOCATION CStored at the Premises
NEAR DOWNTOWN HOUSTON WAREHOUSE
3609 ClintonHouston, Texas 77020INSPECTION: Tuesday, July 14
9:00 A.M. to 3:00 P.M.
LOCATION NStored at the Premises of
RISKE FLEET SERVICE12070 IH 10 East
Converse (San Antonio Area), Texas 78109INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M.
or By Appointment, Call (210) 867-1632
CATERPILLAR 22,500-LB. CAP. MDL. V225, new 1978, gasoline, 160" standard mast, 218" lift, pneu. tires, side shift, 80" forks, 63.5 hours on meter, S/N 18V148.
MITSUBISHI 11,000-LB. CAP. MDL. FD50, new 1996, diesel, 96" triple mast, 187" lift, solid pneu. style tires, side shift, 72" forks, 8,685 hours on meter, S/N AF28A50050.
TOYOTA 8,000 LB CAP. MDL. 7FDU35, new 2007, diesel, 127" standard mast, 199" lift ht., solid pneu. style tires, side shift, 6,865 hours on meter, S/N 70046.
CATERPILLAR 8,000-LB. CAP. MDL. DP40K, new 2005, diesel, 128" standard mast, 198" lift, solid pneu. style tires, side shift, 42" forks, 7,568 hours on meter, S/N AT19C01252.
CATERPILLAR 8,000-LB. CAP., new 2004, diesel, 128"standard mast, 198" lift, solid pneu. style tires, side shift, 42" forks, 6,867 hours on meter, S/N AT19C00898.
CATERPILLAR 5,000-LB. CAP. MDL. P5000D, new 2006, diesel, 113' standard mast, 178" lift, solid pneu. style tires, side shift, 42" forks, 7,593 hours on meter, S/N AT18C01125.
2005
2004
2012
2007
20052006
QS-0024383
GO TO OUR WEBSITE CALENDAR AT WWW.PMI-AUCTION.COM FOR THE LINK TO THE BIDSPOTTER CATALOG.
TERMS & CONDITIONS OF ON-LINE AUCTION SALEAn 18% Buyer’s Premium will apply.A 100% refundable $3,000 (US bidders) or $10,000 (foreign bid-ders) deposit is required for all webcast bidding unless prior ap-proval has been obtained from the auction company.ALL BIDS ARE MADE AND RECEIVED UNDER THE TERMS HEREINAFTER SET FORTH TO WHICH TERMS BIDDERS AGREE BY MAKING THEIR BID AT THE SALE. THESE TERMS CANNOT BE ALTERED EXCEPT BY THE AUCTIONEER. NO EMPLOYEE HAS AUTHORITY TO MODIFY SAME. THE OWNER AND/OR AUCTIONEER RESERVE THE RIGHT TO ADD TO OR MODIFY THE TERMS OF THE SALES.All payments must be made by Cash, Cashier’s Check, Wire Transfer or Company Check with Bank Letter of Guarantee to Plant & Machinery, Inc. (PMI). Here is an example of what your letter should be: [Mr. “Customer Name” representing “Company Name” is a cus-tomer of this bank. This bank will guarantee unqualified payment to Plant & Machinery, Inc. on the account listed herein up to the amount of $________ . This letter is good until August 14, 2015.]All bidders are required to give full name, company name, address, phone, fax, email address, and bank information when registering. All bidders must register before bidding.All bids must be paid in full within two business days after the bids have closed. The Auctioneer shall determine the bidding incre-ments. Some items may be auctioned with reserve.All purchases must be removed within two weeks after the bids have closed, or, within the timeframe posted on the sale web page. No lot can, on any account, be removed prior to PMI having been paid in full. Removal shall be at the expense, risk and liability of the Purchaser. Purchases will be delivered only on presentation of paid bill. Auctioneer shall not be responsible for goods not removed within the aforesaid time.Riggers, movers, electricians or buyer performing work at the Auction Sites must provide Auctioneer with evidence of insurance. The insurance coverage must be at a level acceptable to Auctioneer and to the Seller.All checks for deposits and balances due shall be payable to the order of PLANT & MACHINERY, INC. unless instructed otherwise. All bills must be paid to the Houston headquarters offices of the Auctioneer at 1304 Langham Creek Drive, Suite 454, Houston, TX, 77084 or by wire transfer directly to the bank specified in the wire
transfer instructions provided for this on-line auction. The full pur-chase price on all lots sold to the same buyer must be paid within the time fixed and before removal of any of the goods.THE AUCTIONEER SHALL NOT BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD “AS IS” AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM.Articles purchased may not incorporate approved activating mecha-nisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is Purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation.Purchaser agrees to indemnify and hold Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA re-quirements, or for proximate or consequential damages, costs or legal expenses arising therefrom.No claims will be allowed after removal of goods from premises.Auctioneer shall not, in any event, be liable for non-delivery or any other matter or thing, to any Purchaser of any lot other than for the return to the Purchaser of the deposit or sum paid on said lot, should the Purchaser be entitled thereto.In default of payment of bills in full within the time therein speci-fied, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting Purchaser.Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and
specifically release the Auctioneer from liability therefor. Neither the Auctioneer nor his principal shall be liable by reason of defect in or condition of the premises on which the sale is held.The Auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also re-serves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of a Seller will be served, the Auctioneer reserves the right to sell all the property listed, in bulk.Where items are sold by estimated weight, count or measure, the Purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the Purchaser will receive a refund at the rate of purchase. If there be an excess, the Purchaser will be required to pay for such excess, at the rate of purchase.The Auctioneer reserves the right to reject any and all bids, alter the order of sale, and accept bids made on behalf of the Seller.The record of sale kept by the Auctioneer will be taken as final in the event of any dispute.The Auctioneer is acting as agent only and is not responsible for the acts of its principals. Purchaser acknowledges, as an inducement to Seller to commit Purchaser to bid, that Purchaser has independently inspected the goods bid upon by the Purchaser, and acknowledges to the Seller that Purchaser is acquiring all goods “AS IS, WITH ALL FAULTS” and “WITH REMOVAL AT PURCHASERS’ RISK AND EXPENSE” and agrees to protect, indemnify and hold harmless the Seller from any and all claims, demands, causes of actions, liabili-ties and judgments relating to the conditions or use of the goods.Seller, if not the same as the Auctioneer, shall have the rights, pro-tections and benefits afforded to the Auctioneer as set forth herein.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspec-tion prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.ANY ADDITIONAL PROVISIONS OR AMENDMENTS TO THE ABOVE LISTED TERMS WILL BE POSTED TO THE ON-LINE SALE WEB PAGE BY THE AUCTIONEER PRIOR TO THE START OF BIDDING.
LOCATION PGAS PROCESS EQUIPMENT CO.
11629 B North Houston RosslynHouston, Texas 77086
INSPECTION: Tuesday, 9:00 A.M. to 3:00 P.M.
LOCATION OStored on Premises at
STONE MACHINERY MOVERS
13991 Henry Harris Road Conroe, Texas 77306
INSPECTION: Tuesday, July 14, 9:00 A.M. to 3:00 P.M. or By Appointment
Call (936) 494-8338
HOIST LIFT TRUCKROYAL MDL. R38279-145, Perkins diesel engine, 10' lowered and 12' raised mast height, 10' ttl. fork height, S/N M0866.
LANDEL 30 T. OVERHEAD BRIDGE CRANE
LANDEL 20 T. OVERHEAD BRIDGE CRANE LANDELL 20 T. OVERHEAD BRIDGE CRANE
OVERHEAD BRIDGE CRANESLANDELL 30 T. X 57' SPAN DOUBLE GIRDER, new 1975, ctr. drive, 30 T. hoist cap., 57'0" bridge span, 36'0" lift ht., 150 FPM bridge spd., 50 FPM trolley spd., 11 FPM hoist spd., 12'3" end truck wheelbase, 6'8" trolley wheel-base, 25 HP hoist, 7-1/2 HP bridge, 2 HP trolley, S/N A361.
(2) LANDEL 20 T. X APPROX. 67' SPAN, dbl. box girder, top riding, pendant control, AC pwrd., center drive, S/N A385, S/N A387.
LANDEL 10 T. X APPROX. 51' SPAN, dbl. girder, top riding, pendant con-trol, AC pwrd., center drive, S/N A299.
ROBBINS & MYERS 10 T. X 51' SPAN, dbl. girder, top running, AC pwrd., pen-dant control, center drive, S/N N.A.
R&M MATERIALS HANDLING INC. 10 T., Mdl. Spacemaster SX wire rope hoist, dbl. girder, dual speed, wire rope drum and guide.