online auction - asset sales · online auction live webcast only. 2 contact 416.962.9600 to consign...

373 Munster Avenue, Toronto, ON, Canada M8Z 3C8www.corpassets.com • 416.962.9600 • [email protected]

AUCTION CONDUCTED BY:

MAJOR MULTI-MILLION DOLLAR CNC MACHINING EVENT!

INSPECTION: BY APPOINTMENT ONLY. Or a pre-inspection of assets or video tour with one of our staff can be arranged. Please email [email protected] for further details.

Former Assets of

VELAN INC.

Thursday, June 259:30 A.M. EDT

Assets Located in Montreal, QC

MARK YOUR

CALENDARS!

ONLINE AUCTION

LIVE WEBCAST ONLY

2

CONTACT 416.962.9600 TO CONSIGN EQUIPMENT AT AN UPCOMING AUCTION

THIS MACHINE HAS EXCEPTIONAL CAPABILITIES & CAPACITIES

PIETRO CARNAGHI ATF 14 TM CNC twin-table vertical boring and live milling center

55” diameter palletsView of straight milling head

SIEMENS SIMUMERIK 840C CNC control

View of 40 station ATC

PIETRO CARNAGHI (1996) ATF 14 TM CNC twin-pallet vertical turning and live milling center with SIEMENS SIMUMERIK 840C CNC control, 55” diameter pallets, 63” maximum machining diameter, 59” maximum machining height, 65.9” maximum distance table to cross rail, travels X-152.70”, Z-49.20”, 28” cross rail vertical travel, 12 station head changer with (5) turning heads, (2) right-angled CAPTO milling heads, (1) CAT50 straight milling head, (1) CAT50 right angled milling head and (1) RENISHAW MP3 touch probe, 40 station ATC with (30) CAT50 and (10) CAPTO VDO stations, speeds to 350 RPM in (2) ranges with 80 HP main drive motor, 3,000 RPM maximum milling speed with 40 HP milling drive motor, coolant, chip conveyor, 460V/3PH/60HZ, s/n: 96471 (Asset # 15203)

CNC VERTICAL BORING AND LIVE MILLING CENTER

LIVE MILLING

RIGHT ANGLED MILLING HEADS

3

TO SCHEDULE AN AUCTION CONTACT 416.962.9600

(5) LATE MODEL TOSHIBA VERTICAL BORING MILLS AVAILABLE


View of turning head

57.09” diameter table

FANUC OI-TD CNC control

TOSHIBA SHIBAURA TUE-150(S) vertical boring and live milling center

TOSHIBA SHIBAURA (12-2012) TUE-150(S) CNC vertical boring and live milling center with FANUC OI-TD CNC control, 57.09” table diameter, 78.74” maximum swing, 61.02” maximum machining height, 71.74” maximum machining diameter, 67.72” maximum height from table top to ram bottom, travels X-49.22”, Z-35.43”, 39.37” cross rail vertical travel, table speeds to 400 RPM in (2) ranges, #50 spindle taper, milling spindle speeds to 3,000 RPM, 18 station ATC, through spindle coolant, chip conveyor, 200-220V/3PH/50-60HZ, s/n: 440614 (Asset # 15209)

CNC VERTICAL BORING & LIVE MILLING CENTER

INSTALLED NEW IN 2013

LIVE MILLING

4


ASSETS HAVE BEEN EXCEPTIONALLY MAINTAINED BY THE CORPORATION



FANUC OI-TC CNC controlTOSHIBA SHIBAURA TUE-150(S) vertical boring and live milling center

TOSHIBA SHIBAURA (09-2008) TUE-150(S) CNC vertical boring and live milling center with FANUC OI-TC CNC control, 57.09” table diameter, 78.74” maximum swing, 61.02” maximum machining height, 71.74” maximum machining diameter, 67.72” maximum height from table top to ram bottom, travels X-49.22”, Z-35.43”, 39.37” cross rail vertical travel, table speeds to 400 RPM in (2) ranges, #50 spindle taper, milling spindle speeds to 3,000 RPM, 18 station ATC, through spindle coolant, chip conveyor, 200-220V/3PH/50-60HZ, s/n: 440389 (Asset # 15505)


TOSHIBA SHIBAURA (12-2008) TUE-150(S) CNC vertical boring and live milling center with FANUC OI-TC CNC control, 57.09” table diameter, 78.74” maximum swing, 61.02” maximum machining height, 71.74” maximum machining diameter, 67.72” maximum height from table top to ram bottom, travels X-49.22”, Z-35.43”, 39.37” cross rail vertical travel, table speeds to 400 RPM in (2) ranges, #50 spindle taper, milling spindle speeds to 3,000 RPM, 18 station ATC, through spindle coolant, chip conveyor, 200-220V/3PH/50-60HZ, s/n: 440427 (Asset # 15507)

CNC VERTICAL BORING & LIVE MILLING CENTER

2008

LIVE MILLING

5


LARGE COMPLIMENT OF LIVE MILLING & TURNING HOLDERS AVAILABLE

Straight turning head

57.09” diameter table FANUC OI-TD CNC control

TOSHIBA SHIBAURA TUE-150(S) vertical boring and live milling center

2008

LIVE MILLING

6


TO ARRANGE A PHYSICAL OR VIDEO INSPECTION CALL 416-962-9600

TOSHIBA SHIBAURA TUE-15 CNC vertical boring and live milling center

FANUC series 18-T CNC control

View of straight turning head


TOSHIBA SHIBAURA (08-2006) TUE-15 CNC vertical boring and live milling center with FANUC series 18-T CNC control, 59.06” table diameter, 70.87” maximum swing, 67.72” maximum height from table top to ram bottom, 59.06” maximum machining height, 70.88” maximum machining diameter, travels X-47.25”, Z-35.43”, 41.34” maximum arm vertical travel, table speeds to 300 RPM in (2) ranges, #50 spindle taper, milling spindle speeds to 3,000 RPM, 12 station ATC, coolant, chip conveyor, 200-220V/3PH/50-60HZ, s/n: 440269 (Asset # 15702)


2006

LIVE MILLING

DAEWOO ACE-80 twin-pallet CNC horizontal machining center with FANUC 16-M CNC control, 31.40”x31.40” pallets, travels X-49.10”, Y-39.30”, Z-39.30”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 6,000 RPM, 25 station ATC, coolant, chip conveyor, 200-220V/3PH/60HZ, s/n: AH800081 (Asset # 20407) (LOCATION – PLANT 4, GRANBY, QC)

DAEWOO (1998) ACE-H500 twin-pallet CNC horizontal machining center with FANUC 16-M CNC control, 19.75”x19.75” pallets, travels X-31.50”, Y-25.60”, Z-25.60”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 6,000 RPM, 60-station ATC, coolant, chip conveyor, 200-220V/3PH/60HZ, s/n: AH5X0087 (Asset # 20107)

DAEWOO ACE-80 twin-pallet CNC horizontal machining center with FANUC SERIES 16-M CNC control, 31.50”x31.50” pallets, travels X-49.30”, Y-39.40”, Z-39.40”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 4,000 RPM, 90 station ATC, coolant, chip conveyor, 200-220V/3PH/60HZ, s/n: AH800094 (Asset # 20608) (LOCATION – PLANT 4, GRANBY, QC)

CNC HORIZONTAL MACHINING CENTERS

7


TOSHIBA TMF-10 CNC VERTICAL BORING & LIVE MILLING CENTER

Partial view of tooling complement available

View of live milling head

40” diameter table

FANUC 18i-T CNC control

TOSHIBA SHIBAURA TMF-10 CNC vertical boring and live milling center

TOSHIBA SHIBAURA (1999) TMF-10 CNC vertical boring and live milling center with FANUC 18i-T CNC control, 40” table diameter, 47.2” maximum swing, 43.3” maximum height table top to ram bottom, 36.6” maximum turning height, 47.2” maximum turning diameter, travels X-48.5”, Z-31.5”, C-0.001 degrees indexing, table speeds to 500 RPM in (2) ranges, milling spindle speeds to 2,500 RPM, BT50 spindle taper, 24 station ATC, through spindle coolant, chip conveyor, 50 HP main spindle motor, 20 HP milling spindle motor, FILTERMIST FX4200 mist extractor, 200-240V/3PH/60HZ, s/n: 460005 (Asset # 15502)


LIVE MILLING

1999

8


IMMACULATE MAZAK VERTICAL TURNING & LIVE MILLING CENTER

MAZAK MEGATURN NEXUS900 CNC vertical turning and live milling center

12 station ATC View of 12 station turret 36” diameter table

2012

4000 RPM MILLING SPINDLE

9


(3) KEARNS & RICHARDS CNC HBM’S REBUILT AS NEW AS 2017

KEARNS & RICHARDS 125L CNC table type horizontal boring mill

KEARNS & RICHARDS 125L CNC table type horizontal boring mill

FANUC 18i-M CNC control

View of 4.92” spindle & facing head

FANUC SERIES 3Ti-MODEL B 5 axis CNC

View of 5.11” spindle & facing head

KEARNS & RICHARDS KHT130L CNC table type horizontal boring mill

FANUC 31i-MODEL A5 5 axis CNC

4.92” spindle & facing head

MAZAK (07-2012) MEGATURN NEXUS900 CNC vertical turning and live milling center with MAZATROL MATRIX NEXUS CNC control, 36” table diameter, 39.37” maximum swing, 36.22” maximum machining diameter, 31.50” maximum machining height, travels X-18.50”, Z-34.49”, 12 station turret with (1) live station, 12 station ATC, table speeds to 1250 RPM, speeds to 4000 RPM milling spindle, coolant, chip conveyor, 230-460V/3PH/50-60HZ, s/n: 238678 (Asset # 15704)


KEARNS & RICHARDS 125L CNC table type horizontal boring mill with FANUC SERIES 31i-MODEL A5 5 axis CNC control, 4.92” spindle, 60”x60” table, travels X (table cross) – 90.98”, Y (vertical) – 71.20”, Z (spindle quill) – 28”, W (table longitudinal) 58.70”, U (facing head slide) – 7.60”, #50 spindle taper, speeds to 1120 rpm, coolant, chip conveyor, 600V/3PH/50-60HZ, s/n 7297 (Asset # 17209)KEARNS & RICHARDS (R&R 2002) 125L CNC table type horizontal boring mill with FANUC 18i-M 5 axis CNC control, 4.92” spindle, 60”x60” table, travels X (table cross) – 90.98”, Y (vertical) – 71.20”, Z (spindle quill) – 28”, W (table longitudinal) 58.70”, U (facing head slide) – 7.60”, #50 spindle taper, speeds to 1120 rpm, coolant, chip conveyor, 600V/3PH/50-60HZ, s/n 7312 (Asset # 17202)KEARNS & RICHARDS (R&R 2017) KHT130L CNC table type horizontal boring mill with FANUC SERIES 3Ti-MODEL B 5 axis CNC control, 5.11” spindle, 102”x49.25” table, travels X (table cross) – 118.00”, Y (vertical) – 59.00”, Z (spindle quill) – 31.00”, W (table longitudinal) 61.00”, U (facing head slide) – 7.60”, #50 spindle taper, speeds to 1120 rpm, coolant, chip conveyor, 600V/3PH/50-60HZ, s/n 8000 (Asset # 17206)

CNC TABLE TYPE HORIZONTAL BORING MILLS

RE-MANUFACTURED 2012

RE-MANUFACTURED 2017

2002

10


TWIN SPINDLE, TWIN TURRET, CNC LIVE MILLING & TURNING CENTERS

MAZAK MULTIPLEX MP6300-II twin spindle twin turret CNC live milling & turning center

MAZAK MULTIPLEX MP6250 twin spindle twin turret CNC live milling and turning center

2014

2007

MAZAK (2014) MULTIPLEX MP6300-II twin spindle twin turret CNC live milling and turning center with MAZATROL MATRIX CNC control, 16.93” swing, 57.09” maximum distance between spindles, 16.93” maximum machining diameter, 25.60” maximum shaft workpiece machining length, 8.86” maximum chuck workpiece machining length, travels X1/X2-12.20”, Z1/Z2-23.82”, 3.03” maximum bar capacity, 10” hydraulic chucks, chuck speeds to 4,000 RPM, 12-station turrets with live milling, milling spindle speeds to 4,000 RPM, coolant, chip conveyor, s/n: 252195 (Asset # 14125)MAZAK (2007) MULTIPLEX MP6250 twin spindle twin turret CNC live milling and turning center with MAZATROL PC FUSION 640T CNC control, 12.6” swing, 46.91” maximum distance between spindles, 12.60” maximum machining diameter, 19.66” maximum shaft workpiece machining length, travels X1/X2-9”, Z1-17.25” Z2-19.37”, 6.37” maximum chuck workpiece machining length, 2.5” maximum bar capacity, 10” hydraulic chucks, chuck speeds to 4,000 RPM, 12-station turrets with live milling, milling spindle speeds to 4,500 RPM, coolant, chip conveyor, s/n: 192982 (Asset # 14120)

CNC TURNING AND LIVE MILLING CENTERS

MAZATROL PC FUSION 640T CNC control

MAZATROL MATRIX CNC controlKTAGAWA 10” hydraulic chuck

View of Chuck and 12 station turret

OKUMA (2000) MX-45VAE CNC vertical machining center with OKUMA OSPU100M CNC control, 18.11”x29.92” table, travels X-22.05”, Y-18.11”, Z-17.72”, CAT40 spindle taper, speeds to 7,000 RPM, 20-station ATC, coolant, COMSEP 2000 chip separator system, chip conveyor, 220-480V/3PH/60HZ, s/n: 13032401 (Asset # 19508)SUPERMAX (2007) XV-1020A CNC vertical machining center with FANUC MXP-100i CNC control, 44.09”x20.47” table, travels X-40.15”, Y-20.47”, Z-21.25”, CAT40 spindle taper, speeds to 8,000 RPM, 24-station ATC, coolant, chip conveyor, 220V/3PH/50-60HZ, s/n: 105280 (Asset # 19507)

CNC VERTICAL MACHINING CENTERS

11


EXCEPTIONALLY MAINTAINED & LARGE CAPACITY CNC HMCs AVAILABLE

MAZAK FH-6800 CNC twin-pallet horizontal machining center View of spindle

MAZAK (08-2006) FH-6800 CNC twin-pallet horizontal machining center with MAZATROL 640M CNC control, 25”x25” pallets, travels X-41.34”, Y-31.50”, Z-34.65”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 7,000 RPM, facing head spindle provisioning, 120-station ATC, high pressure coolant through spindle, RENISHAW OMNI2 touch probe system, 200-220V/3PH/50-60HZ, s/n: 189505 (Asset # 20110)MAZAK (2001) FH-6800 CNC twin-pallet horizontal machining center with MAZATROL PC FUSION 640 CNC control, 25”x25” pallets, travels X-41.34”, Y-31.50”, Z-34.65”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 7,000 RPM, facing head spindle provisioning, 120-station ATC, high pressure coolant through spindle, 200-220V/3PH/50-60HZ, s/n: 159217 (Asset # 20507)


120 ATC

2006

View of spindle

MAZAK FH-6800 CNC twin-pallet horizontal machining center View of 120 station ATC

2001

MAZAK (2000) MTV 515/40N CNC vertical machining center with MAZATROL 640 CNC control, 51”x21.5” table, travels X-41”, Y-20”, Z-22”, CAT50 spindle taper, speeds to 6,000 RPM, 30-station ATC, coolant, chip conveyor, 230-460V/3PH/60HZ, s/n: 151090 (Asset # 19106)MAZAK MTV-515/40N CNC vertical machining center with MAZATROL MPLUS CNC control, 51”x21.5” table, travels X-41”, Y-20”, Z-22”, CAT50 spindle taper, speeds to 6,000 RPM, 30-station ATC, coolant, chip conveyor, 230-460V/3PH/60HZ, s/n: 131048 (Asset # 19702)

CNC VERTICAL MACHINING CENTERS

12


(10) CNC HORIZONTAL MACHINING CENTERS AVAILABLE

High speed spindle

OKUMA OSP7000M CNC control

OKUMA MC-600H CNC multi-pallet horizontal machining center

25”x25” pallets

OKUMA (2003) MC-600H CNC multi-pallet horizontal machining center with OKUMA OSP7000M CNC control, 25”x25” pallet, travels X-39.37”, Y-31.50”, Z-29.53”, W-360,000 positions in 0.001 degree increments, CAT 50 spindle taper, speeds to 10,000 RPM, 25 HP main spindle motor, 72-station ATC, coolant through spindle, chip conveyor, (6) pallet pool system with APC automatic pallet changer, 220-440V/3PH/60HZ, s/n: 0376 (Asset # 20109)TOSHIBA SHIBAURA (12-1998) NX76 CNC twin-pallet horizontal machining center with FANUC CNC control, 24.80”x29.50” pallets, travels X-33.46”, Y-29.92”, Z-30.70”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 8,000 RPM, 38-station ATC, coolant through spindle, chip conveyor, 220250V/3PH/50-60HZ, s/n: 212830 (Asset # 20509)TOSHIBA SHIBAURA (2000) NX76 CNC twin-pallet horizontal machining center with TOSNUC T888 CNC control, 24.80”x29.50” pallets, travels X-33.46”, Y-29.92”, Z-30.70”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 8,000 RPM, 60-station ATC, coolant through spindle, chip conveyor, 220250V/3PH/50-60HZ, s/n: 212958 (Asset # 20108)TOSHIBA SHIBAURA (12-1998) NX76 CNC twin-pallet horizontal machining center with TOSNUC 888 CNC control, 24.80”x29.50” pallets, travels X-33.46”, Y-29.92”, Z-30.70”, W-360,000 positions in 0.001 degree increments, CAT50 spindle taper, speeds to 8,000 RPM, 38-station ATC, coolant through spindle, chip conveyor, 220250V/3PH/50-60HZ, s/n: 212840 (Asset # 20611) (LOCATION – PLANT 4, GRANBY, QC)


6 PALLET POOL

2003

13


LARGE OFFERING OF HORIZONTAL MACHINING CENTERS AVAILABLE

TOSHIBA SHIBAURA NX76 CNC twin-pallet horizontal machining center

2000

3 AVAILABLE

TOSHIBA SHIBAURA NX76 CNC twin-pallet horizontal machining center

View of spindle

APC with 24.80”x29.50” pallets

TOSNUC T888 CNC control

DAEWOO PUMA 10HC CNC turning center with FANUC O-T CNC control, 19.7” swing over bed, 14.6” maximum turning diameter, 20.7” maximum turning length, 2.9” maximum bar capacity, 10” diameter fixture chuck, speeds to 3,500 RPM, travels X-8.3”, Z-21.7”, 10-station ATC, hydraulic programmable tailstock, tool checker arm, coolant, chip conveyor, 220V/3PH/60HZ, s/n: PH100658 (Asset # 14115)DAEWOO PUMA 10HC CNC turning center with FANUC O-T CNC control, 19.7” swing over bed, 14.6” maximum turning diameter, 20.7” maximum turning length, 2.9” maximum bar capacity, 10” diameter fixture chuck, speeds to 3,500 RPM, travels X-8.3”, Z-21.7”, 10-station ATC, hydraulic programmable tailstock, tool checker arm, coolant, chip conveyor, 220V/3PH/60HZ, s/n: PH100542 (Asset # 14116)

CNC TURNING CENTERS

14


ASSETS HAVE BEEN EXCEPTIONALLY MAINTAINED BY THE CORPORATION

DAEWOO ACE-H500 twin-pallet CNC horizontal machining center



DAEWOO PUMA 10HC CNC turning center with FANUC O-T CNC control, 19.7” swing over bed, 14.6” maximum turning diameter, 20.7” maximum turning length, 2.9” maximum bar capacity, 10” diameter fixture chuck, speeds to 3,500 RPM, travels X-8.3”, Z-21.7”, 10-station ATC, hydraulic programmable tailstock, tool checker arm, coolant, chip conveyor, 220V/3PH/60HZ, s/n: 880011 (Asset # 14111)

CNC TURNING CENTERS

15


ASSORTMENT OF CNC VMCs & TURNING CENTERS AVAILABLE

EUMEGA MDV4 vertical turret milling machine

TOS SUS63 engine lathe

SUPERMAX XV-1020A CNC vertical machining centerOKUMA MX-45VAE CNC vertical machining center

DAEWOO PUMA 10HC CNC turning center

2000 2007

2001

MORI SEIKI SL8 CNC turning center

©2020 CORPORATE ASSETS INC. ALL RIGHTS RESERVED.

AFFILIATIONS

INSPECTION BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.

REMOVAL All assets must be removed no later than Friday, July 17 by appointment only.

TERMSCorporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

PAYMENT A Buyer’s Premium will apply at this sale. International & online bidders may need a refundable deposit to bid. SALE WILL BE CONDUCTED IN USD.

Please refer to our website at www.corpassets.com or call 416.962.9600 for further information. Pour les services en français, composez le 1.855.583.5551

We AcceptPlease visit our website as specific terms and conditions may apply.

Tuesday, June 25Montreal, Quebec, Canada

AUCTION DETAILS

SUBSCRIBE TO OURNEWSLETTERAND GET THE LATESTAUCTION UPDATES

corpassets.com/newsletter-signup

BID ONLINE AT:

THIS IS A PARTIAL LISTING ONLY! FOR FURTHER INFORMATION, PLEASE VISIT WWW.CORPASSETS.COM

Former Assets of

VELAN INC.

ALSO: SMT SWEDTURN 12 CNC turning center with retrofit FANUC 21i-TA (updated-2005) CNC control, 22.80” swing over bed, 20” maximum turning diameter, 57.67” maximum turning length, 3.60” maximum bar capacity, speeds to 1,500 RPM, travels X-14.96”, Z-55.11”, 12-station ATC, hydraulic programmable tailstock, coolant, chip conveyor, 220V/3PH/60HZ, s/n: 34/583095/10 (Asset # 14101); NIIGATA HN80FC twin-pallet CNC horizontal machining center with FANUC series 15-M CNC control, 31.5”x31.5” pallets, travels X-60.20”, Y-33.50”, Z-43.30”, 90-station ATC with (60) position CAT50 and (30) position HSK, coolant, chip conveyor, 230V/3PH/60HZ, s/n: 46250024 (Asset # 20205); TOS SUS63 engine lathe with 28” swing, 85” between centers, 19.5” 3-jaw chuck, speeds to 1,120 RPM, 2.5” spindle bore, IN/MM threading, HEIDENHEIN 2-axis DRO, coolant, steady rest, spare chuck, 600V/3PH/60HZ, s/n: 0450052 (Asset # 11212); EUMEGA (2001) MDV4 vertical turret milling machine with 10”x50” table, speeds to 4,200 RPM infinitely variable, ACCURITE DRO, power draw bar, power table, coolant, 575V/3PH/50-60HZ, s/n: 3835 (Asset # 18113); LARGE SELECTION of CAT 50, CAT 40, BT50, BT40 tool holders; machine tool accessories including milling vises, fixtures and clamping; LISTA type tool cabinets and workbenches, plant support equipment & MUCH MORE!

LIVE WEBCAST ONLY

Asset Sales, Inc.163 Associates Lane

Indian Trail, NC 28079

www.asset-sales.com

SALE HELD PROUDLY IN CONJUNCTION WITH:

HUGE QTY AVAILABLE

online auction - asset sales · online auction live webcast only. 2 contact 416.962.9600 to consign...

Documents