online auc on ﬁsh and meat processing machinery in urk (nl)

Online auc�on fish and meat processing machinery inUrk (NL)

Closing: 04 July 2018 from 14:00 hrs.

Viewing day:02 July 2018 from 09:00 �ll 13:00 hrs.

Address:Hoornse Hop 68321 WX UrkNetherlands

General terms and condi�ons of the online auc�on

Closing date 04 July 2018 from 14:00 hrs. Viewing 02 July 2018 from 09:00 �ll 13:00 hrs.Organizing Company Industrial Auc�ons BV

Looyenbeemd 115652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208Fax: +31 (0)40 2409 209E-mail: info@industrial-auc�ons.com

Buyers premium 16% over the highest bidV.A.T 21% over the highest bid including PremiumPickup date 11 July 2018 from 09:00 �ll 16:00 hrs.Pickup address Hoornse Hop 6

8321 WX UrkNetherlands

Delivery instruc�ons The buyer is fully responsible for the dismantling, loading andtransporta�on of the bought lots. Industrial Auc�ons B.V. cannot acceptany responsibility unless indicated otherwise. The delivery (pick-upbought lots) will only take place on the men�oned delivery date/�me andaddress.

Payment details Before collec�on of the goods your payment has to be fulfilled. It ispossible to transfer the amount due to our account with ING-bank,account number 005033999 in Best, IBAN: NL34INGB0005033999, BIC:INGBNL2A or to our account at Rabobank, account number 157198367 inBest, IBAN: NL80RABO0157198367, BIC: RABONL2U, Gladbacher Bank AG,Iban: DE83310601818887176010, BIC: GENODED1GBM, indica�nginvoice- and customernumber.

General terms andcondi�ons of sale

On the auc�on general terms and condi�ons of the online auc�on areapplicable concerning the (possible) purchase of moveable assets,furthermore these specific terms and condi�ons.

Combina�ons All lots in a combina�on will be sold individually first. The star�ng bid ofthe combina�on is the total amount of the individual bids. Thecombina�on will open a�er all individual lots are closed. If thecombina�on is sold it overrules the individual bids, if not the individualbids are applicable.

Prolonga�on If a bid is made in the last 5 minutes the lot closes, the closing �me of thatlot will be extended with 5 minutes un�l no bids are made.

www.industrial-auc�ons.com

mailto:[email protected]

Nr Title Descrip�on Start €

1 Risco Risco double sha� paddle mixer with li�er for 200 litermeat bins, model: RS 450, serial number: 0561, year ofconstruc�on: 1989, 380 V, 3 Ph, 50 Hz, li�ing height:1700 mm, dimensions li�er: 900 mm x 900 mm x 2900mm, dimensions mixer: 2100 mm x 900 mm x 1600 mm.

3500

2 Risco Risco double sha� paddle mixer, model: RS 450, serialnumber: 0658, year of construc�on: 1993, dimensions:2100 mm x 900 mm x 1600 mm.

2500

3 Carnitech Carnitech fillet washer, type: CT1636.20, machinenumber: 07-0108, year of construc�on: 2007, 3 x 400 V,50 Hz, 18 A, plas�c mesh belt, belt width: 595 mm,clearance: 650 mm x 70 mm, total dimensions: 2400 mmx 1000 mm x 1520 mm.

5000

4 Acadian Acadian X-Ray scanner, model type: G40, serial number:AS120133, year of construc�on: 2008, 6 A, plas�c belt,belt width: 500 mm, double plas�c mesh infeed belt,belt width: (2x) 200 mm, total dimensions: 2800 mm x850 mm x 2200 mm.

1500

5 Marel Marel spli�er, type: spli�er, serial number: 1004, year ofconstruc�on: 2000, belt type: Intralox 2400 FE Radium,size: 2x152x3200x130L, 230 V, 0.65 kW, belt width: (2x)150 mm, total dimensions: 1500 mm x 1000 mm x 1300mm.

1000

6 Avery Dennison Avery Dennison mobile label printer, type: ALX924/5,serial number: 0071841104-ALX925, year ofconstruc�on: 2011, 100-240 AC, 50/60 Hz, 3.5-1.5 A,dimensions: 750 mm x 750 mm x 1100 mm.

750

7 Meyn 11 pallets with parts for Meyn fille�ng line , amongothers: s/s frames for Meyn slicing modules and circularknifes.

7500

8 Spako Spako smoke chamber for 1 smoke trolley, 14 kW, modelcontrol panel: MCTT7, inside dimensions: 980 mm x 720mm x 1700 mm, total dimensions: 1650 mm x 900 mm x2200 mm.

2000

9 Spako Spako smoke generator, type: VRG, serial number:17590, year of construc�on: 1998, 380 V, 50 Hz, 2.05 kW,dimensions: 1050 mm x 850 mm x 2120 mm.

2000

10 Spako Spako smoke chamber for 1 smoke trolley, type: SPM1402, serial number: 18625, year of construc�on: 1999,220-380 V, 50 Hz, 15.4 kW, control panel: MCTT5, insidedimensions: 980 mm x 720 mm x 1700 mm, totaldimensions: 1650 mm x 900 mm x 2200 mm.

2000

12 NN trolley S/s trolley, dimensions: 1150 mm x 350 mm x 950 mm. 50


13 Poly-Clip SystemsGmbH & Co. KG

Poly-Clip Systems GmbH & Co. KG mobile automa�csealer and clipper, type: TSCA 160-L, number: 103/12,400 V, 3 Ph, 50/60 Hz, 12 A, 6.0 kW, 5-7 bar, 1375 kg, beltwidth: 75 mm, seal length: 200 mm, diameter pipes: 45mm and 30 mm, total dimensions: 2250 mm x 1350 mmx 1750 mm. Including pallet with 8 boxes of Poly-Clipclips, type: R-IDL 07-175, 55000 clips per box. Machine isnew.

50000

14 Kaufler Kaufler fat sheeter, type: BK, number: 10038, year ofconstruc�on: 1988, 380 V, plas�c wire belt, belt width:405 mm, working width: 450 mm, total dimensions:1750 mm x 800 mm x 1500 mm.

500

15 Kaufler Kaufler fat sheeter, type: BKI, number: 10088, year ofconstruc�on: 1988, 380 V, plas�c wire belt, belt width:405 mm, working width: 450 mm, total dimensions:1750 mm x 800 mm x 1500 mm.

500

16 NN double transportbelt

Double transport belt used as fille�ng table, s/s frame,plas�c belts, belt width (3x): 300 mm, total dimensions:2050 mm x 1200 mm x 1300 mm. Missing workpla�orms.

250

17 Penko Engineering Penko Engineering weighing belt, type: 762100-SS00-CUS-EN, plas�c belt, belt width: 400 mm, belt length:2700 mm and 1500 mm, total dimensions: 3800 mm x1600 mm x 1850 mm.

500

18 Waldyssa Waldyssa packaging, weighing and labelling machine,model: B-223-XL, serial number: 11-106, year ofconstruc�on: 2005, 400 V, 3 Ph, 50-60 Hz, 10 A, weight:500 kg, plas�c belt, belt width: 270 mm, plas�c wiredbelt, belt width: 270 mm, film width: 590 mm, includingBizerba weighing scale, type: 18-A, number: 10107337,maximum weight: 6 kg, minimum weight: 40 gram, e = 2gram and Bizerba labelling machine, type: GV, number:10107337, year of construc�on: 2005, 230 V, 50 Hz, 0.6A, total dimensions: 2500 mm x 1600 mm x 1500 mm.

5000

19 Waldyssa Waldyssa packaging, weighing and labelling machine,model: B-223-XR, serial number: 18-176, year ofconstruc�on: 2007, 400 V, 3 Ph, 50-60 Hz, 10 A, weight:500 kg, plas�c belt, belt width: 270 mm, plas�c wiredbelt, belt width: 270 mm, film width: 590 mm, includingBizerba weighing scale, type: 18-A, number: 10292941,maximum weight: 6 kg, minimum weight: 40 gram, e = 2gram and Bizerba labelling machine, type: GV, number:10292941, year of construc�on: 2007, 230 V, 50 Hz, 0.6A, total dimensions: 2500 mm x 1600 mm x 1500 mm.

6000

20 Marel Marel checkweigher, type: INW3X400, serial number:A034612, year of construc�on: 2005, 380/480 V, 3 Ph, 10A, 1.2 kW, belt width: 400 mm, total dimensions: 1750mm x 900 mm x 1500 mm. Belt is missing.

2500


21 Schröder Schröder injector, type: Imax 420, serial number: 4201024 03, year of construc�on: 2003, 400/440 V, 50/60Hz, 18 A, 9.5 kW, 6 bar, 155 needles, s/s walking beam,beam width: 400 mm, total dimensions: 2000 mm x 950mm x 2230 mm.

2500

22 A.E.W. Engineering A.E.W. Engineering slicer, type: APC slicer, serial number:60940027, 380 V, 3 Ph, dimensions: 2000 mm x 1300mm x 2150 mm. Including extra turret and pallet withspare parts.

2500

23 Supervac Supervac vacuum machine, type: GK 812 B, fabrica�onnumber: 201106, year of construc�on: 2001, 400 V, 3 Ph,50 Hz, 14 A, 7.6 kW, plas�c belt, belt width: 730 mm,including Busch vacuum pump, type: 400-212, 2889,capacity: 400 m³ per hour, dimensions vacuum pump:1300 mm x 800 mm x 1000 mm, dimensions vacuummachine: 2300 mm x 1400 mm x 1700 mm.

2000

24 Supervac Supervac transport belt, plas�c belt, belt width: 730 mm,total dimensions: 1450 mm x 1200 mm x 1100 mm.

500

25 Supervac Supervac shrink tunnel, fabrica�on number: 900311, 415V, 50 Hz, 43.6 A, 30.6 kW, dimensions: 1050 mm x 1200mm x 1100 mm.

1000

26 HumbersideEngineering SuppliesLTD

Humberside Engineering Supplies LTD washing machinefor smoke trolleys, infeed width: 700 mm, clearance:1250 mm x 1500 mm x 2200 mm, Johnson pump, type:FRES65-230, total dimensions: 2400 mm x 1800 mm x2560 mm. Including pallet with s/s pipings.

1500

27 NN transport belt Double transport belt for 6 lanes, s/s frame, plas�c belt,belt width: (2x) 800 mm, total dimensions: 1800 mm x650 mm x 1450 mm. Used as ou�eed belt for lot number28.

2500

28 NN pin bone remover Baader FTC 6-lane pin bone remover, belt width: (2x) 800mm, total dimensions: 1800 mm x 650 mm x 1450 mm.

12500

29 Carnitech Carnitech inliner, type: PM45, id number: 1611800, yearof construc�on: 2008, belt width: 600 mm, totaldimensions: 2400 mm x 1000 mm x 2000 mm.

1500

30 Marel Marel meat press, machine type: Presso 600, serialnumber: 082600-00003, year of construc�on: 2006, 2 x400 V/3 x 220 V, 50/60 Hz, 2.1 kW, weight: 800 kg, beltwidth: 605 mm, height dividers: 50 mm, distancebetween dividers: 200 mm, total dimensions: 3000 mm x2700 mm x 1800 mm.

1000

31 AFO Heat AFO Heat grill consis�ng of: grill, type: AFG-600-21 RB,serial number: M001, year of construc�on: 2013, 3 x 400V, 2x 46 kW, 20-100 mbar, 1500 kg and mobile mesh beltwith cleaning system, s/s belt, belt width: 630 mm,clearance: 700 mm x 360 mm, dimensions: 4500 mm x1800 mm x 1800.

30000

32 Flo� Flo� potato peeler, dimensions: 800 mm x 700 mm x1250 mm.

500


33 Wol�ing Belam Wol�ing Belam injector, type: MI-450, machine number:9603-016.0022, 380 V, 50 Hz, 5 bar, 106 needles, s/swalking beam, beam width: 450 mm, total dimensions:2250 mm x 900 mm x 1690 mm.

1000

34 Meyn Meyn thigh deboner, type: 09.03.024.012, serialnumber: SRTD 0307, year of construc�on: 2008,dimensions: 1500 mm x 1300 mm x 1800 mm.

2500

35 Meyn Meyn thigh deboner, type: 09.03.024.012, serialnumber: SRTD 0306, year of construc�on: 2008,dimensions: 1500 mm x 1300 mm x 1800 mm.

2500

36 Ceia Ceia metal detector, model: THS, serial number:20300218023, 230 V, 50-60 Hz, 1 kVa, plas�c belt, beltwidth: 400 mm, clearance: 440 mm x 310 mm, totaldimensions: 1500 mm x 1050 mm x 1250 mm.

2500

37 Kortlever Kortlever mobile spreader, type: streuer, machinenumber: 2435, year of construc�on: 2006, dimensions:1200 mm x 600 mm x 1650 mm.

500

38 Günther Günther freeze and coa�ng unit, type: GPC 4000 C N2,machine number: 26615, year of construc�on: 2001,capacity: 1500 liter, 400 V, 32 A, 20 kW, 6 bar, 4000 literper minute, dimensions: 4500 mm x 2600 mm x 2700mm, dimensions compressor cabinet: 750 mm x 700 mmx 780 mm.

5000

39 Bastra Bastra con�nuous smoke chamber for 3 smoke trolleys,with horizontal air flow, Bastra smoke generator, type:200, fabric number: 0017, year of construc�on: 1996,230 V, 1.57 kW, 50 Hz, medium: sawdust, dimensions:3600 mm x 1600 mm x 3300 mm.

1000

40 NN li�er for meat bins Li�er for 200 liter meat bins, li�ing height: 2100 mm,total dimensions: 800 mm x 600 mm x 3000 mm.Technical condi�on unknown.

250

41 Wiesheu GmbH Wiesheu GmbH mobile combisteamer with hood, type:B8E2IS500, serial number: 10120009, year ofconstruc�on: 02-2008, 400 V, 3 Ph, 50 Hz, 26.6 A, 18.4kW, 1.5-2.5 bar, 10 floors, floor dimensions: 610 mm x340 mm, total dimensions: 1100 mm x 930 mm x 2170mm.

500

42 Leven� Leven� combisteamer with hood, type: BM MM Q2.4,serial number: 10060030E, year of construc�on: 2010,380-415 V, 3 Ph, 50/60 Hz, 18.5 kW, 1.5-5 bar, 12 floors,floor dimensions: 610 mm x 410 mm, total dimensions:970 mm x 830 mm x 2090 mm.

500

43 Eurocave 2 Eurocave wine cabinets, type: V250 13CL Elect,number: 16 and 3, capacity: 200 bo�les, 220 V, 50 Hz,115 W, refrigerant: R12, 140 gram, dimensions: (2x) 850mm x 750 mm x 1970 mm.

250


45 Dexion Dexion refrigerator, model: 70BTH, serial number:358056, year of construc�on: 2009, 230 V, 1 Ph, 50 Hz,0.60/0.73 kW, refrigerant: R404A, volume: 569 dm³, 380gram, 3 floors, floor dimensions: 650 mm x 530 mm,total dimensions: 830 mm x 700 mm x 2010 mm.

100

46 Dexion Dexion refrigerator, model: 70TNH, serial number:365267, year of construc�on: 2010, 230 V, 1 Ph, 50 Hz,0.35/0.41 kW, refrigerant: R404A, 238 gram, volume: 569dm³, 3 floors, floor dimensions: 650 mm x 530 mm, totaldimensions: 830 mm x 700 mm x 2010 mm.

100

47 Talsa Talsa mixer, model: MIX 100 E, serial number: 110435,year of construc�on: 2011, 400/230 V, 3 Ph, 50 Hz,1.5/2.6 A, 0.55 kW, volume: 100 liter, total dimensions:950 mm x 700 mm x 1150 mm.

750

48 Rudolf Rahaus GmbH Rudolf Rahaus GmbH high pressure vessel with hose andpistol, fabrica�on number: 9235, year of construc�on:1992, volume: 95 liter, pressure: 6 bar, temperature: 20°C, dimensions: 800 mm x 600 mm x 1120 mm.

100

49 Rudolf Rahaus GmbH Rudolf Rahaus GmbH high pressure vessel with hose andpistol, fabrica�on number: 9408, year of construc�on:1992, volume: 95 liter, pressure: 6 bar, temperature: 20°C, dimensions: 800 mm x 600 mm x 1120 mm.

100

50 Thielmann ContainerSysteme

Thielmann Container Systeme high pressure vessel withhose and pistol, number: 00614, year of construc�on:1995, volume: 50 liter, pressure: 6 bar, dimensions: 410mm x 380 mm x 1300 mm.

100

51 Turbo Tools Inc. Turbo Tools Inc. mobile part for depositor, dimensions:1050 mm x 550 mm x 1560 mm.

100

52 Bizerba Bizerba bandsaw, type: MKB 649, serial number:1430920, 230/400 V, 3 Ph, 50 Hz, 4.7/2.7 A, 1.1 kW, totaldimensions: 550 mm x 500 mm x 900 mm.

100

53 De Jong Engineering De Jong Engineering mobile forming machine, type:VF600, serial number: 107-04, year of construc�on:2004, 400 V, 50 Hz, 32 A, 6 bar, s/s mesh belt, belt width:600 mm, including s/s trolley with forming plates andplates, dimensions trolley: 1300 mm x 760 mm x 1440mm, dimensions machine: 2000 mm x 1100 mm x 1700mm.

2500

54 Kami Stäl AB Kami Stäl AB eleva�ng screw, eleva�ng height: 1000 mm,total dimensions: 1300 mm x 700 mm x 1400 mm.

500

55 Wire Belt Company Wire Belt Company mobile 90° transport belt, serialnumber: 1145-1995, s/s mesh belt, belt width: 600 mm,total dimensions: 1480 mm x 1050 mm x 980 mm.

500

56 Hillerslev Hillerslev mobile transport belt, serial number:2825-2014, plas�c belt, belt width: 450 mm, totaldimensions: 2300 mm x 700 mm x 1560 mm.

100

57 Busch Busch vacuum pump, type: RA 0302 D 5S3 DIJZ, number:C1147000007, year of construc�on: 2011, capacity: 300m³ per hour, dimensions: 1300 mm x 570 mm x 800 mm.

1500


58 Cryovac/Old Rivers Cryovac/Old Rivers rotary vacuum packaging machine,model: 8310-140, serial number: G-1906, 440 V, 3 Ph, 50Hz, 11/20 A, 5 vacuum units, seal length: 420 mm, totaldimensions: 3100 mm x 2200 mm x 1450 mm, includingsteel frame with 2 Busch vacuum pumps, dimensions:1000 mm x 1000 mm x 1300 mm.

2500

59 Rühle Rühle dicer with li�er for 200 liter meat bins, type: SR 3,number: 43, year of construc�on: 2004, 400 V, 3 Ph, 50Hz, 16 A, 3/7.0 kW, dimensions chamber: 120 mm x 120mm, total dimensions: 1400 mm x 3000 mm x 2100 mm.

2500

60 Meyn Meyn mobile breading machine, machine number:706960, year of construc�on: 2000, s/s mesh belt, beltwidth: 600 mm, s/s screw, screw width: 150 mm, totaldimensions: 3000 mm x 1200 mm x 1850 mm.

2500

61 Dexion Eurotec Group Dexion Eurotec Group freezer, model: 70TNH, serialnumber: 358003, year of construc�on: 2009, 230 V, 1 Ph,50 Hz, volume: 569 dm³, refrigerant: R404A, 230 gram, 3floors, dimensions: 700 mm x 800 mm x 2000 mm.

500

62 Bosgraaf Bosgraaf depositor, type: MX30S-50/10, number:200917212, year of construc�on: 2009, dimensionsdepositor: 1700 mm x 1000 mm x 2500 mm, dimensionstrolley: 1000 mm x 750 mm x 1100 mm. Control panelincomplete. Technical condi�on unknown.

500

63 Leonhardt Leonhardt mobile depositor, type: TGS 1 V, number:0140 1271, year of construc�on: 2012, dimensions: 1000mm x 720 mm x 1380 mm. Incomplete.

250

64 Helmut SchröderGmbH

Helmut Schröder GmbH injector, 62 needles, s/s belt,belt width: 630 mm, total dimensions: 2050 mm x 950mm x 2300 mm.

1500

65 Mul�vac Mul�vac suc�on device for rest film, type: ASE530, serialnumber: 20081988, year of construc�on: 2012, 230 V,50/60 Hz, 10/16 A, 2.3 kW, total dimensions: 650 mm x600 mm x 1600 mm.

1500

66 Cougar Cougar pulled pork/pulled chicken machine , plas�c belt,belt width: 400 mm, total dimensions: 1700 mm x 900mm x 1580 mm.

2500

67 OK Interna�onal OK Interna�onal mobile bag sealing machine, serialnumber: 2060, year of construc�on: 02-2002, plas�cbelt, belt width: 250 mm, total dimensions: 1750 mm x1000 mm x 1700 mm.

2500

68 Carnitech Carnitech mobile salt/spices dispenser, type: GT 1402,machine number: 03-0116, year of construc�on: 2003, s/s mesh belt, belt width: 610 mm, dimensions hopper:700 mm x 650 mm x 350 mm, total dimensions: 1600mm x 1250 mm x 1700 mm.

2500

69 J.H. Stälindustrie A/S J.H. Stälindustrie A/S s/s tank, number: 723 147 AT, yearof construc�on: 1998, volume: 513 liter, jacket: 12 liter,working temperature: 0-90°C, total dimensions: 1250mm x 1050 mm x 2310 mm.

500


70 Delford-Sortaweigh Delford-Sortaweigh labelling machine, model: CONCEPT500, serial number: LA 0160, year of construc�on: 2005,temperature range: 0-35°C, weight: 200 kg, plas�c belt,belt width: 300 mm, including Markem labeller, type:Smartdate 2, serial number: 07273940, year ofconstruc�on: 2007, total dimensions: 1300 mm x 950mm x 1750 mm.

500

71 Marel Marel por�on cu�er, type: IPM3 X300, serial number:a019445, year of construc�on: 2003, 380-480 V, 3 Ph, 10A, 4 kW, belt type: perforated belt, belt width: 280 mm,total dimensions: 3300 mm x 950 mm x 1620 mm.

7500

72 Atlas Copco Atlas Copco screw air compressor with air dryer, type:GA 37, serial number: AII 321194, year of construc�on:1996, 37 kW, 10 bar, free air delivery: 82 liter per second,3000 rota�ons per minute, weight: 935 kg, air dryer,type: I0 100-TUV, serial number: 122525, year ofconstruc�on: 1996, 230 V, 1 Ph, 50 Hz, 13 bar,refrigerant: R22, total dimensions: 1760 mm x 850 mm x1630 mm.

500

73 Fortress Technology Fortress Technology mobile metal detector head, model:Phantom, clearance: 495 mm x 145 mm, calibrated �ll09-2017, total dimensions: 600 mm x 900 mm x 1000mm.

500

74 Foekema Foekema mobile eleva�ng belt, machine number: OV-03,year of construc�on: 2006, belt width: 600 mm,eleva�ng height: 1390 mm, total dimensions: 2450 mm x850 mm x 1680 mm. Belt is missing.

250

75 Marel Marel checkweigher, type: INW X300, serial number:A047264, year of construc�on: 2007, 380-480 V, 3 Ph, 10A, 1.2 kW, plas�c belt, belt width: 280 mm, totaldimensions: 1770 mm x 820 mm x 1460 mm.

2500

76 Schmidt-TransportanlagenGmbH

Schmidt-Transportanlagen GmbH mobile dividing belt,number: 5667, year of construc�on: 2003, s/s rollers,roller width: 770 mm, plas�c dividers, width dividers:110 mm, belt width plas�c belts: (9x) 60 mm, totaldimensions: 1750 mm x 1450 mm x 1130 mm.Incomplete, technical condi�on unknown.

250

77 Koppens Koppens mobile preduster, type: PRM600MEG, machinenumber: 1317, year of construc�on: 1997, 400 V, 3 Ph,50 Hz, 15.18 A, 4.42 kW, s/s mesh belt, belt width: 600mm, total dimensions: 3700 mm x 1200 mm x 1750 mm.

7500

78 Koppens Koppens mobile breading machine, type: EPR 600-C,machine number: PR 600-C-02, 380 V, 3 Ph, 50 Hz, 1.09kW, 3.5 A, weight: 200 kg, belt width: 600 mm, totaldimensions: 1800 mm x 1000 mm x 1800 mm.

2500


79 Ilpra Ilpra traysealer, serial machine: Foodpack, model:Speedy PN10, serial number: FP 9104, year ofconstruc�on: 2011, 400 V, dye: (2x) 212 mm x 124 mm,Busch vacuum pump, type: RA 0063 F 5K3, year ofconstruc�on: 2010, capacity: 63 m³/hour, totaldimensions: 2900 mm x 950 mm x 1600 mm.

3000

80 NN work table Work table with 2 pla�orms, s/s frame, 2 plas�cworktops, dimensions: (2x) 1000 mm x 390 mm, totaldimensions: 2000 mm x 1000 mm x 1090 mm.

250

81 Kaj Olesen A/S Kaj Olesen A/S mobile hopper, type: S, serial number:04.09.18, year of construc�on: 05-00, dimensionshopper: 450 mm x 450 mm x 420 mm, total dimensions:800 mm x 600 mm x 1900 mm. Including pallet withparts.

2000

82 Koppens Koppens fryer, type: BR1800/400, machine number:BR1800-28, 380 V, 3 Ph, 50 Hz, 55 A, 36 Kva, weight: 450kg, belt width: 400 mm, total dimensions: 3800 mm x1000 mm x 1880 mm.

5000

83 Bilwinco Bilwinco 10 heads mul�head weigher, machine type: BW210-W, serial number: 011, order number: 5632, year ofconstruc�on: 2005, 3x 400 V, 50 Hz, 16 A, 5-10 bar,maximum: 1500 gram, minimum: 200 gram, dimensions:1900 mm x 1900 mm x 1300 mm. Machine incomplete,missing display, including wooden pallet box with parts.

5000

84 NN eleva�ng belt Eleva�ng belt, s/s frame, plas�c mesh belt with dividers,belt width: 460 mm, divider height: 25 mm, distancebetween dividers: 250 mm, eleva�ng height: 1100 mm,total dimensions: 1600 mm x 750 mm x 1220 mm.

250

85 NN eleva�ng belt Eleva�ng belt with infeed hopper, s/s frame, plas�c meshbelt, belt width: 300 mm, eleva�ng height: 1650 mm,total dimensions: 3200 mm x 700 mm x 1750 mm.

250

86 FAM FAM mobile eleva�ng belt with dividers, type:41-95-101, fabrica�on number: 002071, s/s frame,plas�c belt with dividers, belt width: 300 mm, dividerheight: 54 mm, eleva�ng height: 1550 mm, distancebetween dividers: 300 mm, total dimensions: 1300 mm x500 mm x 1750 mm.

100

87 NN ham press Mobile ham press, dimensions: 2100 mm x 500 mm x1900 mm. Incomplete.

500

88 Marel Food Systems /Jansen Techniek

Marel Food Systems / Jansen Techniek infeed belt forgrader with 2 flippers, type: S1500/25 FG, year ofconstruc�on: 2012, plas�c mesh belt, belt width: 254mm, total dimensions: 2000 mm x 1200 mm x 2000 mm.

500

89 Marel Food Systems /Jansen Techniek

Marel Food Systems / Jansen Techniek infeed belt for X-Ray scanner with 2 flippers, model: toevoer X-Ray, type:S1500/254 FG, year of construc�on: 2012, plas�c meshbelt, belt width: 254 mm, total dimensions: 1600 mm x1000 mm x 2100 mm.

500


90 C. Hoegger AG C. Hoegger AG meat press, type: SP 890, fabrica�onnumber: 9587, year of construc�on: 1996, 220/240 V, 50Hz, 0.5 kW, 3-8 bar, dimensions: 2500 mm x 900 mm x1700 mm.

7500

91 NN transport belt Transport belt on s/s frame, belt width: 80 mm, totaldimensions: 800 mm x 700 mm x 1100 mm.

125

92 NN eleva�ng belt Mobile eleva�ng belt, s/s frame, plas�c belt, belt width:400 mm, eleva�ng height: 950 mm, including frame forcrates, dimensions frame: 570 mm x 370 mm, totaldimensions: 2300 mm x 900 mm x 1000 mm.

250

93 Van Leeuwen Van Leeuwen mobile eleva�ng belt, type number: OPVB01, year of construc�on: 2009, s/s frame, plas�c belt,belt width: 400 mm, eleva�ng height: 2000 mm, totaldimensions: 3300 mm x 700 mm x 2150 mm.

250

94 Van Leeuwen Van Leeuwen eleva�ng belt with dividers and infeedhopper, type number: OPVB SPEC 01, year ofconstruc�on: 2009, s/s frame, plas�c mesh belt, beltwidth: 300 mm, divider height: 25 mm, distancebetween divider: 260 mm, eleva�ng height: 1800 mm,total dimensions: 2500 mm x 800 mm x 1850 mm.

250

95 NN eleva�ng belt Mobile eleva�ng belt, s/s frame, plas�c belt, belt width:400 mm, eleva�ng height: 950 mm, total dimensions:2000 mm x 700 mm x 1000 mm.

250

96 Carsø & Aaby-Staal A/S

Carsø & Aaby-Staal A/S mobile por�oning machine, type:DL-2002, serial number: 7857-3, year of construc�on:2003, 400 V, 0.23 kW, belt width: 200 mm, clearance:130 mm x 80 mm, total dimensions: 1400 mm x 850 mmx 1350 mm.

2500

97 Jansen Techniek Jansen Techniek mobile transport belt, model:Separa�eband, type: S550 MiniPitch, year ofconstruc�on: 2011, s/s frame, plas�c belt, belt width:600 mm, total dimensions: 1500 mm x 1000 mm x 900mm.

500

98 Kaj Olesen A/S Kaj Olesen A/S knife sharpener, dimensions: 610 mm x740 mm x 440 mm.

250

99 Marel Marel ITM fish trimming robot, type: ITM F2, serialnumber: A045311, year of construc�on: 2007, belt type:voltabelt/ameral k112/Intralox s1100 1g, belt size:variable, 3x 380 V / 3x 480 V, dimensions: 6100 mm x1550 mm x 2150 mm.

5000

100 Maja Maja por�oning machine, type: FP 100, number: 45948,year of construc�on: 2006, 400 V, 3 Ph, 50 Hz, 29 A, 19kW, dimensions: 1900 mm x 1000 mm x 1900 mm, Majarejecter, type: MA 2, number: 46184, year ofconstruc�on: 2006, 24 V, 1.0 A, belt width: 160 mm,dimensions: 2000 mm x 1300 mm x 1550 mm, 2 tooltrolleys with parts, dimensions trolley: (2x) 1000 mm x800 mm x 1200 mm.

2500


101 Townsend Townsend mobile injector, model: 1450, serial number:410, year of construc�on: 1996, 380 V, 50 Hz, 3 Ph,2.5-7.6 A, plas�c mesh belt, infeed belt width: 360 mm,clearance: 350 mm x 150 mm, 185 needles, ou�eed beltwidth: 700 mm, total dimensions: 4200 mm x 1100 mm x1650 mm.

2500

102 Selo BV Selo BV mobile fla�ener, type: SM152072, number:SP250VERL., year of construc�on: 1995, 220/380 V, 50Hz, 2.5 A, 0.5 kW, belt width: 255 mm, total dimensions:1700 mm x 700 mm x 1300 mm. Incomplete, missingbelts.

500

103 Dipl.-Ing. Schindler &Wagner GmbH & CoKG

Dipl.-Ing. Schindler & Wagner GmbH & Co KG knifesharpener on steel trolley, type: SPM-SM 480.02.00,number: 2397, year of construc�on: 2007, 400 V, 50 Hz,2000 VA, dimensions: 1350 mm x 650 mm x 1800 mm.

500

104 TVM TVM mobile por�oning machine, type: TVM-Por�o 4000,serial number: 05-00.26725219, year of construc�on:2000, 400 V, 3 Ph, 50 Hz, 8/4 bar, 1200/600 liter air,weight: 380 kg, belt width: 180 mm, total dimensions:2300 mm x 750 mm x 2770 mm.

500

105 Scanvaegt Scanvaegt s/s switch cabinet, dimensions: 800 mm x 300mm x 1800 mm.

500

106 NN switch cabinet S/s switch cabinet, dimensions: 800 mm x 460 mm x1760 mm.

1250

107 Dipl.-Ing. Schindler &Wagner GmbH & CoKG

Dipl.-Ing. Schindler & Wagner GmbH & Co KG slicer line,type slicer: SVC 26.627/300, machine number: 2397,serial number: 703646, year of construc�on: 2007, 230V, 50 Hz, 24 VDC, air pressure: 6 bar, 180 liter perminute, dimensions: 3000 mm x 2300 mm x 2300 mm,infeed conveyor, s/s frame, plas�c belt, belt width: 300mm, dimensions: 5400 mm x 1400 mm x 1800 mm,dividing belt, s/s frame and rollers, roller width: 900 mm,dimensions: 1800 mm x 1500 mm x 1400 mm, ou�eedwire belt, s/s frame, plas�c wire belt, belt width: 245mm and 560 mm, dimensions: 5700 mmm x 1700 mm x1550 mm. Including 2 pallets and 1 pallet box with spareparts with among others: 3 knifes, plas�c belts, rollersand electronic parts, dimensions: (3x) 1200 mm x 800mm x 750 mm.

25000

108 Van de Vecht Van de Vecht crate washer, dimensions: 850 mm x 1260mm x 1700 mm. Defect.

1500

109 Poly-Clip SystemsGmbH & Co. KG

Poly-Clip Systems GmbH & Co. KG mobile double clipper,type: DFC 8162, number: 51159, 380 V, 50 Hz, 6 A, 5-7bar, belt width: 190 mm, total dimensions: 2400 mm x850 mm x 2000 mm.

2500

110 NN mixing tank Tank with agitator, volume: 850 liter, dimensions tank:1400 mm x 1400 mm x 2500 mm.

2500


111 NN mixing tank Tank with agitator, volume: 850 liter, dimensions: 1400mm x 1400 mm x 2500 mm, including control panel,dimensions: 750 mm x 750 mm x 300 mm.

2500

112 Fomaco Fomaco brine mixer, model: FBM 500, machine number:9822-2004, 3x 400 V, 50 Hz, 9.0/25 A, mixing capacity:500 liter, hopper capacity: 40 liter, Inoxpa pump, type:SE-26E, number: 249336 A, year of construc�on: 2004,total dimensions: 1700 mm x 1200 mm x 2200 mm.Cover for pump is missing.

2500

113 Ilpra Ilpra traysealer, serie: Foodpack, model: Speedy MEC V/G, serial number: FP 8795, year of construc�on: 2010,400 V, film width: 640 mm, dye: (3x) 118 mm x 118 mm,Busch vacuum pump, type: RA 0100 F 503, number:080087244, year of construc�on: 2008, capacity: 100 m³/hour, total dimensions: 3600 mm x 1150 mm x 1630 mm.Including pallet with various dyes, dimensions: (4x) 95mm x 127 mm, (3x) 178 mm x 140 mm, (4x) 118 mm x118 mm.

7500

114 Scanvaegt Scanvaegt checkweigher, type: weighing machine4717.275.20, serial number: BOF00102, year ofconstruc�on: 2007, 400 V, 3 Ph, 50/60 Hz, 16 A, weight:185 kg, including Scanvaegt transport belt, type: ACCConv. 4707.275.08, serial number: BPU00539, year ofconstruc�on: 2007, 230 V, 3 Ph, 50/60 Hz, 1.9 kW,weight: 85 kg, total dimensions: 1250 mm x 650 mm x1790 mm.

2500

115 Marel Marel por�on cu�er, type: I-CUT 10, serial number:A074987, year of construc�on: 2010, 380/480 V, 12 A,plas�c belt, belt width: 280 mm, total dimensions: 2700mm x 850 mm x 1700 mm.

20000

116 MR Mul�vac MR X-ray scanner, clearance: 330 mm x 170mm, total dimensions: 750 mm x 1000 mm x 2250 mm.Missing belt.

1000

117 Sepama�c Sepama�c separator, type: SEPA 1200, machine number:195519, 400 V, 50 Hz, 15 A, 7.5 kW, 24 V, drum: 4 mm,dimensions: 1600 mm x 1200 mm x 1850 mm

5000

118 Baader Baader separator, type: 699 SC, machine number:12-4526-0699, year of construc�on: 1991, 380 V, 3 Ph,50 Hz, 15.0 A, drum: 5 mm and 8 mm, dimensionsseparator: 1500 mm x 1600 mm x 1500 mm, dimensionstool trolley: 2300 mm x 600 mm x 1850 mm.

5000

119 Simo Simo process pump, s/s screw, dimensions hopper: 770mm x 1000 mm x 550 mm, total dimensions: 1950 mm x1400 mm x 1350 mm.

2500

120 Ampag Ampag mobile strapping machine, type: Rotant 600 SK,machine number: 808.611, year of construc�on: 1986,220/380 V, foot control, dimensions: 1100 mm x 1100mm x 1600 mm.

100


121 Henkovac Henkovac mobile double chamber vacuum machine,type: E-503, seal length: (4x) 850 mm, dimensionschamber: (2x) 850 mm x 870 mm, total dimensions:2050 mm x 1200 mm x 1200 mm. Seals are missing.Without vacuum pump.

2500

122 Kramer + Grebe Kramer + Grebe double sha� paddle mixer-grinder, type:TMG, machine number: 371/0110, year of construc�on:1999, 230/400 V, 3 Ph, 50 Hz, 150/200 A, plate diameter:200 mm, total dimensions: 2350 mm x 2200 mm x 2700mm.

25000

123 Gernal Gernal cooking vessel with agitator and outlet, type: KK-S-R-600, serial number: 98/00891, volume: 600 liter,inside dimensions: 1200 mm x 600 mm, ax diameter: 40mm, total dimensions: 1500 mm x 1500 mm x 1350 mm.Missing agitator, vessel leak.

1000

124 NN couplings S/s trolley with various couplings and parts, dimensionstrolley: 1050 mm x 900 mm x 1000 mm.

100

125 Karl Schnell GmbH &Co

Karl Schnell GmbH & Co vacuum filling machine withli�er for 200 liter meat bins, type: 596, serial number:21533, year of construc�on: 1999, 400 V, 50 Hz, 22.5 A,filling, por�oning.

3000

126 Sepama�c Sepama�c separator, type: DMS 400, machine number:114018, 400/230 V, 50 Hz, 4 A, drum: 4 mm, totaldimensions: 900 mm x 1700 mm x 2400 mm.

5000

127 PWR Robo�cs &Packaging

PWR Robo�cs & Packaging robot arm, type:UNIGRABBER 2, serial number: 005 (P04-299), 400 V, 3Ph, 50 Hz, 16 A, dimensions: 1400 mm x 1150 mm x1800 mm.

1500

128 PWR Robo�cs &Packaging

PWR Robo�cs & Packaging robot arm, type:UNIGRABBER 2, serial number: 006 (P04-299), 400 V, 3Ph, 50 Hz, 16 A, dimensions: 1400 mm x 1150 mm x1800 mm.

1500

129 Kemper Kemper casepacker with Nordson hot melt glue unit,type: Problue 4, serial number: 1022230A, 200-240 V,50/60 Hz, 26 A, total dimensions: 300 mm x 1100 mm x1750 mm.

1000

130 Speed CleaningMachine

Speed Cleaning Machine for seabass, dorado, perch, etc.,dimensions: 3150 mm x 700 mm x 1650 mm.

7500

131 Tetra Laval Tetra Laval 90° mesh belt, type: RT 90/8-400L, machinenumber: RT 90/8-400L-277, 380 V, 3 Ph, 50 Hz, 0.87 A,0.18 kW, weight: 140 kg, s/s mesh belt, belt width: 400mm, total dimensions: 1750 mm x 700 mm x 850 mm.

500

132 NN transport belt 90° mobile mesh belt, s/s frame, s/s mesh belt, beltwidth: 620 mm, total dimensions: 2150 mm x 1310 mm x1050 mm.

500


133 NN eleva�ng belt Mobile eleva�ng belt, s/s frame, plas�c belt withdividers, belt width: 450 mm, height dividers: 20 mm,distance between dividers: 155 mm, eleva�ng height:1300 mm, total dimensions: 1400 mm x 470 mm x 1500mm. Belt is broken.

250

134 Franz Anlagenbau Franz Anlagenbau slicer, type: ESB 92/400, number:29512, 380 A, 2 A, 0.75 kW, plas�c belt, belt width: 380mm, total dimensions: 1450 mm x 800 mm x 1760 mm.

250

135 Glass Glass mobile fla�ener, plas�c belt, belt width: 320 mm,total dimensions: 1600 mm x 600 mm x 1370 mm.

2500

136 Baader Baader trimming machine for salmon and sea trout,type: 988 L, project number: 101928, year ofconstruc�on: 2004, 415 V, 3 Ph, 50 Hz, 26 A, belt width:(2x) 300 mm, total dimensions: 3400 mm x 1550 mm x2080 mm.

5000

137 SchröderMaschinenbau GmbH

Schröder Maschinenbau GmbH injector, type: N180 FIF,number: N180 112 00, year of construc�on: 2000, 400 V,50 Hz, 27 A, 14 kW, 6 bar, 180 needles, walking beam,beam width: 620 mm, clearance: 620 mm x 190 mm,dimensions injector: 2000 mm x 1700 mm x 2500 mm,Schröder Maschinenbau GmbH filter tub with 2membrane pumps, dimensions filter tub: 1850 mm x1000 mm x 850 mm.

3000

138 LSS LSS labelling machine, type: ALS 204, serial number:29477, year of construc�on: 2007, dimensions: 750 mmx 500 mm x 1900 mm. Belt is missing.

250

139 CFS CFS transport belt, type: einlau�elt, year ofconstruc�on: 2006, s/s frame, plas�c mesh belt, beltwidth: 350 mm, total dimensions: 1650 mm x 800 mm x1300 mm.

250

140 Fomaco Fomaco brine mixer, model: FBM 1500, machinenumber: 11058-2007, year of construc�on: 2007, 3 x 400V, 50 Hz, maximum fuse: 35 A, Inoxpa pump, type:SE-26E, number: I011808D, 220/380 V, 3000 rates perminute, total dimensions: 2400 mm x 2100 mm x 2300mm. Cover of pump is damaged.

5000

142 Scanvaegt Turn table with 4 Scanvaegt weighing scales, diametertable: 1500 mm, height table: 820 mm, indicator type:411, serial number: BPE 03891 D, load receptor, type:1025.15.03, serial number: BPE 03891, maximum: 3 kg,minimum: 0.02 kg, e = 0.001 kg, dimensions scale: (4x)300 mm x 200 mm, total dimensions: 2400 mm x 2400mm x 1200 mm. Missing 3 indicators.

500

143 Carnitech Carnitech vision slicer, type: IPS 3000, serial number:9337, year of construc�on: 2008, 3 x 400 V, 3 Ph, 50/60Hz, 16 A, 6 - 8 bar, plas�c infeed belt, belt width: 278mm, knife width: 225 mm, plas�c ou�eed belt, beltwidth: 202 mm, total dimensions: 3650 mm x 1000 mm x1750 mm.

5000


144 Carnitech Carnitech 90° curve conveyor, type: CR, iden�fica�on:1596000, year of construc�on: 2007, s/s frame, plas�cmesh belt, belt width: 300 mm, total dimensions: 1600mm x 1350 mm x 1000 mm.

500

145 NN roller conveyorwith pusher

S/s roller conveyor with pusher, roll width: 300 mm,width pusher: 550 mm, total dimensions: 700 mm x 750mm x 1100 mm.

250


5000


500



250


5000


500



250

152 Marpet Fabrica�ons Marpet Fabrica�ons transport belt, serial number: 0344,year of construc�on: 2003, 240 V, 3 Ph, 0.15 kW, s/sframe, plas�c belt, belt width: 300 mm, totaldimensions: 5115 mm x 500 mm x 920 mm.

500

153 Ishida Ishida checkweigher with rejector, model: DACS-W-012-SB-SS-I-N, serial number: 562477, year of construc�on:2012, 240 V, 1 Ph, 50 Hz, 2 A, weighing range: 0 - 1200gram, plas�c belt, belt width: 218 mm, last calibra�on:2015, total dimensions: 1500 mm x 700 mm x 1450 mm.

5000

154 Turbo Systems Ltd Turbo Systems Ltd mobile frame for mixer, dimensions:850 mm x 1100 mm x 2450 mm.

500

155 NN eleva�ng belt Eleva�ng belt with dividers, s/s frame, plas�c mesh beltwith dividers, belt width: 400 mm, divider height: 25mm, distance between dividers: 95 mm, eleva�ngheight: 1150 mm, total dimensions: 3000 mm x 700 mmx 1250 mm.

500


156 Scanvaegt Scanvaegt checkweigher, type: 7140/7143.25.10, serialnumber: 99013201, plas�c belt, belt width: 270 mm,total dimensions: 1100 mm x 800 mm x 1480 mm.

2500

157 Fomaco Fomaco mobile dry sal�ng machine, model: BAFO 6,machine number: 8849 2002, year of construc�on: 2002,3 x 400 V, 50 Hz, 6.0 A, 6.0 bar, s/s mesh belt, belt width:700 mm, clearance: 800 mm x 200 mm, totaldimensions: 4100 mm x 1300 mm x 2100 mm. Wheelsare damaged.

2500

158 Unikon Unikon washing machine for pallet boxes, type:UNW-3000 B, machine number: 080, year ofconstruc�on: 2006, 400 V, 3 Ph, 125 A, weight: 1100 kg,pump/blower: 22/15 kW, drive unit: 0.55/0.32/0.32 kW,electric heated: 3 x 15 kW, plas�c chains, distancebetween chains: 540 mm, clearance: 1050 mm x 1250mm, inspec�on �ll: 06-2018, total dimensions: 10000mm x 4000 mm x 2800 mm, including blower on s/sframe, dimensions: 1400 mm x 800 mm x 700 mm andpallet with s/s pipings.

7500

159 Meca Plas�c Meca Plas�c traysealer, type: S4000DP, number: 6744,year of construc�on: 2009, plas�c infeed roller conveyor,roll width: 650 mm, film width: 455 mm, dye: (3x) 155mm x 117 mm, plas�c mesh ou�eed conveyor, beltwidth: 530 mm, Bein Helmut GmbH thermal transferprinter, type: Intern DP Futuro I+107, serial number:1608, year of construc�on: 2009, 230 V, 50/60 Hz, 1.5 A,total dimensions traysealer: 5800 mm x 1200 mm x 2550mm, DTE water chiller, type: K-003.6, manufacturingnumber: D0757-D0916703, year of construc�on: 2009,refrigerant: R407C, 1.1 kg, dimensions water chiller: 550mm x 570 mm x 470 mm.

2500

160 Carnitech Carnitech mobile turn table, type: roundtable, year ofconstruc�on: 2008, diameter table: 1500 mm, totaldimensions: 1850 mm x 1500 mm x 1950 mm.

2500

161 Henkovac Henkovac traysealer, type: TPS-2000, serial number:00412003, 380/400 V, 3 Ph, 50 Hz, 25 A, weight: 1150 kg,dye: (2x) 160 mm x 120 mm and (1x) 300 mm x 230 mm,plas�c roller conveyor, roller width: 535 mm, Rietschlevacuum pump, type: VCAH 100 (08), year ofconstruc�on: 1993, capacity: 100 m³/hour, totaldimensions: 4800 mm x 1100 mm x 1540 mm.

5000

162 Meca Plas�c Meca Plas�c traysealer, type: MECA 3000, number:D1101, year of construc�on: 1999, ou�eed rollerconveyor, roll width: 470 mm, total dimensions: 3650mm x 1000 mm x 2100 mm. Incomplete. Without dye.

1000

163 NN transport belt Transport belt, s/s frame, plas�c mesh belt, belt width:(2x) 150 mm, total dimensions: 2500 mm x 600 mm x870 mm.

250


164 Inauen Maschinen AG/ VC 999

Inauen Maschinen AG / VC 999 skinpacker, type: VC 999/ RS Compact , machine number: 4406032, 400 V, 3 Ph,50 Hz, 7 kW, 6 - 8 bar, hard film, film width: 322 mm, so�film, film width: 322, dye: (2x) 225 mm x 116 mm, totaldimensions: 3400 mm x 800 mm x 1900 mm. Plas�ccover broken. Without vacuum pump.

7500

165 NN roller conveyor S/s roller conveyor, roll width: 550 mm, total dimensions:1000 mm x 650 mm x 450 mm.

250

166 NN switch cabinet S/s frame with switch cabinet and display, dimensions:500 mm x 700 mm x 1900 mm.

100

167 Hillerslev Hillerslev transport belt, year of construc�on: 2007, s/sframe, plas�c mesh belt, belt width: 290 mm, totaldimensions: 800 mm x 500 mm x 1000 mm.

250

168 Scanvaegt Scanvaegt transport belt, type number: ACC CONV.4707.275.08, serial number: BPU 00539, year ofconstruc�on: 2007, 3 x 230 V, 1 Ph, 50/60 Hz, 1.9 A,weight: 85 kg, plas�c belt, belt width: 277 mm, totaldimensions: 800 mm x 600 mm x 960 mm.

250

169 Cryovac Cryovac dip tank, model: ST12 RHS, serial number:A51500208, year of construc�on: 1999, 380/415 V 50Hz, 16 A, 4 kW, 6 bar, s/s mesh belt, belt width: 600 mm,clearance: 700 mm x 300 mm, total dimensions: 1300mm x 1200 mm x 1560 mm. Incomplete.

500

170 Stork Stork �l�ng device for barrels, type: LF-1600, serialnumber: E85-01, 400 V, 3 Ph, 50 Hz, maximum capacity:200 kg, dimensions: 2000 mm x 1650 mm x 1800 mm.

1000

171 NN glazing belt Mobile glazing belt with dividers, plas�c mesh belt, beltwidth: 1200 mm, divider height: 95 mm, distancebetween dividers: 310 mm, eleva�ng height: 1100 mm,total dimensions: 3250 mm x 1400 mm x 1500 mm.

750

172 NN eleva�ng belt S/s eleva�ng belt with dividers and infeed hopper, beltwidth: 600 mm, distance between dividers: 285 mm,divider height: 130 mm, eleva�ng height: 1900 mm,dimensions: 2650 mm x 1200 mm x 2050 mm.

750

173 Baader Baader automa�c fish feeder, type: 482, dimensions:2900 mm x 1850 mm x 1750 mm. Technical condi�onunknown.

1000

174 Frigoscandia Frigoscandia freezing tunnel, model: AGA Freeze L,1250-9-N, number: 1270021, clearance: 1400 mm x 400mm, total dimensions: 9400 mm x 2100 mm x 1500 mm.Including infeed sta�on, s/s mesh belt, belt width: 760mm, total dimensions: 2600 mm x 2900 mm x 2200 mmand pallet with parts and s/s mesh belt, belt width: 1250mm.

5000

175 NN curve conveyor 90° curve conveyor, s/s frame, plas�c mesh belt, beltwidth: 290 mm, total dimensions: 3400 mm x 1200 mm x1000 mm.

250


176 Carnitech Carnitech mobile 45° eleva�ng curve conveyor, type: PM45, iden�fica�on: 159600101, year of construc�on:2008, plas�c mesh belt, belt width: 300 mm, eleva�ngfrom 900 mm to 1400 mm, total dimensions: 6000 mm x1700 mm x 1400 mm.

250

177 GCT/Buse GCT/Buse nitrogen feezer, 3 etages, s/s mesh belt, beltwidth: 750 mm, total dimensions: 7700 mm x 2000 mm x2270 mm.

7500

178 NN eleva�ng screw Mobile eleva�ng screw with sieve, diameter screw: 690mm, eleva�ng height: 1420 mm, total dimensions: 3000mm x 900 mm x 2600 mm.

1000

179 Machinefabriek vanRijn

Machinefabriek van Rijn frame for eleva�ng belt,number: A-130598, s/s frame, belt width: 300 mm,eleva�ng height: 1830 mm, total dimensions: 3700 mm x720 mm x 1970 mm. Belt and motor are missing.

100

180 NN eleva�ng belt Mobile eleva�ng belt with dividers, s/s frame, plas�cmesh belt, belt width: 270 mm, height dividers: 50 mm,distance between dividers: 390 mm, eleva�ng height:1800 mm, total dimensions: 2850 mm x 820 mm x 2070mm. Some dividers are broken.

100

181 NN frame foreleva�ng belt

Mobile frame for eleva�ng belt, s/s frame, belt width:600 mm, eleva�ng height: 1650, total dimensions: 4300mm x 1000 mm x 1830 mm. Belt is missing.

100

182 Hillerslev Hillerslev mobile eleva�ng belt, number: 0916-2001, s/sframe, plas�c belt, belt width: 200 mm, eleva�ng height:1190 mm, total dimensions: 3900 mm x 920 mm x 1300mm.

100

183 NN eleva�ng belt Eleva�ng belt with dividers, s/s frame, plas�c belt, beltwidth: 700 mm, height dividers: 50 mm, distancebetween dividers: 320 mm, total dimensions: 2850 mm x800 mm x 700 mm.

100

184 Scanvaegt Scanvaegt A/S sor�ng belt with 8 flippers, belt width:246 mm, total dimensions: 5300 mm x 900 mm x 950mm. Including pallet with parts.

100

185 NN plas�c transportbelt

3 pallets with plas�c transport belts, belt width: 410mm, 255 mm and 410 mm.

100

186 Marel Marel fille�ng belt with spraying unit, type: con-mstr,serial number: A023778, 400 V, 3 Ph, 0.25 kW, s/s frame,plas�c mesh belts, belt width: (2x) 305 mm and (1x) 300mm, total dimensions: 400 mm x 1420 mm x 1430 mm.

500

187 NN transport belt Transport belt, s/s frame, plas�c belt, belt width: 400mm, belt height: 1430 mm, total dimensions: 6700 mm x700 mm x 1600 mm.

500

188 NN mixing tank Mixing tank with agitator, diameter tank: 1400 mm,height tank: 2000 mm, Flux-Geräte GmbH agitator, type:FRM 100-LA8.

250

189 NN transport belt Mobile transport belt, s/s frame, s/s mesh belt, beltwidth: 400 mm, total dimensions: 4500 mm x 500 mm x870 mm. Belt is broken and incomplete.

100


190 FA. TerbahlEdelstahlverarbeitung

FA. Terbahl Edelstahlverarbeitung mobile eleva�ng beltwith dividers, type: Scharnierband TR-12-089/J1267,machine number: 99788/1, year of construc�on: 2/03,230/400 V, 0.37 kW, belt width: 400 mm, height dividers:25, distance between dividers: 355 mm, eleva�ng height:1750 mm, total dimensions: 5150 mm x 600 mm x 1880mm.

100

191 NN sink S/s sink, 2 faucets, sensor control, dimensions: 1000 mmx 300 mm x 800 mm.

50

192 NN turn table S/s turn table, diameter table: 1250 mm, totaldimensions: 1250 mm x 1250 mm x 980 mm.

250

193 NN sink S/s mobile sink, 3 faucets, dimensions: 1800 mm x 1000mm x 1500 mm.

100

194 NN sink S/s sink, 1 faucet, foot control, dimensions: 450 mm x450 mm x 1100 mm.

50

195 NN table S/s table, dimensions: 1100 mm x 1100 mm x 900 mm. 20

196 NN table S/s table, dimensions: 2000 mm x 840 mm x 1600 mm. 100

197 NN sink S/s sink, 7 faucets, knee control, dimensions: 4000 mm x470 mm x 600 mm.

100

198 NN work table Deheading / De-icing table with slide and pla�orm, totaldimensions: 2700 mm x 2300 mm x 1300 mm. Palletboxes can be placed under table.

100

199 Buhmann Buhmann 3-lanes cup filling and closing machine, type:AFL3B, machine number: 12.140.046, year ofconstruc�on: 2007, 400 V, 21 A, including switch cabinet,dimensions switch cabinet: 1200 mm x 410 mm x 2100mm, dimensions cup filling machine: 3000 mm x 1300mm x 2340 mm, 3400 mm x 1200 mm x 1650 mm and2450 mm x 1400 mm x 1480 mm.

1500

200 Van Leeuwen Van Leeuwen 90° curve conveyor, type number: STZT1103, year of construc�on: 2011, s/s frame, plas�c belt,belt is incomplete, total dimensions: 2300 mm x 2800mm x 1050 mm.

250

201 Poly-Clip SystemGmbH & Co. KG

Poly-Clip System GmbH & Co. KG semi-automa�c mobiledouble clipper, type: PDC 600, number: 166, year ofconstruc�on: 1999, 5 - 7 bar, total dimensions: 1210 mmx 660 mm x 1020 mm. On another loca�on in Lelystad(NL), viewing and pick-up in consulta�on with IndustrialAuc�ons BV.

2000

202 GKS Packaging GKS Packaging ver�cal form, fill and seal machine, type:CP350 Combi, serial number: 04607, year ofconstruc�on: 03-2015, 230 V, 50/60 Hz, 1200 Wa�, bagwidth: 75 - 350 mm, 30 packages per minute, totaldimensions: 1010 mm x 1570 mm x 1520 mm. Onanother loca�on in Lelystad (NL), viewing and pick-up inconsulta�on with Industrial Auc�ons BV.

15000

203 AGA AGA nitrogen freezer, 3 floors, belt width: 930 mm, totaldimensions: 5865 mm x 1850 mm x 2870 mm.

5000


204 Fomaco Fomaco injector, model: FGM 88C DC, machine number:7247 1998, year of construc�on: 1998, 3 x 380 V, 50 Hz,25.6 A, 6.0 bar, plas�c mesh belt, dimensions: 2950 mmx 1260 mm x 2190 mm, including filter, dimensions: 1520mm x 950 mm x 995 mm.

20000

205 Baader Baader separator, type: 607, machine number:12-5405-0607, year of construc�on: 1994, 400 V, 3 Ph,50 Hz, 30.0 A, drum diameter: 3 mm. Including trolley fordrum, total dimensions: 1700 mm x 1570 mm x 1960mm. On another loca�on in Lelystad (NL), viewing andpick-up in consulta�on with Industrial Auc�ons BV.

25000

206 Waldyssa Waldyssa packaging machine, model: B-188, series: 425,number: 4242, year of construc�on: 2000, 400 V, 3 Ph,50 Hz, 2.6 kW, 310 kg.

750

207 Waldyssa Waldyssa packaging machine, model: B-185, serialnumber: 557-553, year of construc�on: 2007, 400 V, 3Ph, 50-60 Hz, 4.2 A, weight: 287 kg.

750


General Terms of the online auc�on

Ar�cle 1. Defini�ons

Delivery: the actual delivery of the lot to the buyer or to his authorized representa�ve;

Bid: each by a user in the auc�on (for a lot) bid amount;

User: the one who has registered on the website;

User Agreement: the agreement between Industrial Auc�ons and the user;

Lot: an ar�cle, or a number of ar�cles that are auc�oned together (under one number);

Purchase Price: the amount of the highest -allocated- bid increased by the Buyers

Premium above the highest bid and the VAT owed;

Purchase Agreement: the purchase agreement between buyer and seller;

Buyer: the user to whom the lot is allocated;

Registra�on: registra�on of the user on the website by comple�ng the registra�on form

found on the website;

Specific Online Auc�on Terms and Condi�ons: besides, in addi�on to or devia�ng from

these General Terms and Condi�ons, applicable regula�ons that apply, as stated on the

website for the specific auc�on;

Alloca�on: the declara�on of Industrial Auc�ons that a lot or combina�on of lots has

been allocated by payment of the purchase price to the highest bidder. Seller hereby

irrevocably authorizes Industrial Auc�ons to assign and sell ar�cles on behalf of the

seller(s);

Auc�on: internet sales organized by Industrial Auc�ons of movable goods;

Seller: the person(s) a lot is being auc�oned in whom/whose commission;

Website: website www.Industrial-Auc�ons.com, which is maintained by Industrial

Auc�ons, based in Oirschot;

Ar�cle 2. Applicability

2.1 These General Terms and Condi�ons apply both to the rela�onship between sellers

and Industrial Auc�ons, as the rela�onship between users/buyers and other third

par�es on the one hand and on the other hand Industrial Auc�ons. These condi�ons

therefore apply to (being) organized auc�ons by Industrial Auc�ons and through the

par�cipa�on in auc�ons by users and/or buyers.

2.2 The applicability of other General Condi�ons than the present, and (where

applicable) the Specific Online Auc�on Terms and Condi�ons is excluded.

Ar�cle 3. Registra�on on the website and the use

3.1 By registra�on on the website a user is able to follow the progress of auc�ons on the


/media/uploads/2017/08/30/terms-and-conditions-industrial-auctions.pdf

website. The user agreement is not transferable. By registra�on the user provides his

personal details to Industrial Auc�ons and chooses his own password to access the

website.

3.2 Industrial Auc�ons confirms the registra�on by e-mail to the user on the specified e-

mail address, a�er which user can gain access to the auc�on by using his chosen

password. User is obliged to behave a�er granted access to the website and do not

inflict damage to the website or to other users. User is liable for all ac�vi�es that occur

on the website a�er that access has been gained by using the password of user.

3.3 The user guarantees the accuracy and completeness of the provided personal details

at registra�on. If the personal details change at any �me, the user is obliged to inform

Industrial Auc�ons by return of such change(s).

3.4 Industrial Auc�ons reserves the right to refuse registra�on and to terminate

unilaterally, without giving a reason.

3.5 Industrial Auc�ons takes obtained personal data in records kept for that purpose.

Through registra�on on the website, the user gives consent to the use and the storage

and processing of the personal data recorded.

3.6 The user is forbidden to reproduce the website or any part thereof or make available

(through deep linking or otherwise) without the prior wri�en consent of Industrial

Auc�ons. Intellectual property is retained by Industrial Auc�ons.

3.7 By (one-off) registra�on user accepts these General Terms and Condi�ons each �me

that user logs on to the website and whether or not bids.

Ar�cle 4. The auc�on

4.1 Industrial Auc�ons reserves the right to cancel an auc�on earlier than reported on

the website or to extend one. In case of a technical malfunc�on of the website, causing

it not complete and/or inaccessible to all users, Industrial Auc�ons reserves the right to

extend the auc�on.

4.2 The effec�veness of the internet and its website depends on many factors and many

others. Industrial Auc�ons is not in control of many factors and can accept no liability for

things they are not in control off. User and seller declare themselves familiar with and

agree with the special circumstances of an internet auc�on and with the technical

imperfec�ons that can arise. Industrial Auc�ons must therefore limit its liability. For

example, it may involve down�me, interrup�ons, delays in the connec�on,

maintenance, updates, viruses, limited accessibility, et cetera et cetera. Industrial

Auc�ons is not liable for any damage that might result therefrom.

4.3 Industrial Auc�ons hereby exclude to both the user and the seller any liability for any

damage directly and/or indirectly, in any way arise, including but not limited to the

damage arising from the use of the website, unless there is intent or willful recklessness

of Industrial Auc�ons.

4.4 Industrial Auc�ons also accepts no liability for any damage whatsoever that arises in


any way by and/or arising from:

- Ac�ons by the user that may have been prompted by informa�on placed on the

website;

- The impossibility of using the website (completely) and/or another malfunc�on in the

website or the suppor�ng system;

- The failure of the lots to the specifica�ons as reported on the website;

- The fact that the informa�on on the website is incorrect, incomplete or out of date;

- Errors in the so�ware and/or the suppor�ng system of the website;

- The unlawful use of systems, including the website of Industrial Auc�ons by a third

party;

- Acts of the seller a�er the user has concluded a purchase agreement;

4.5 Industrial Auc�ons organizes online auc�ons on behalf of sellers. She does not sell

own products. Industrial Auc�ons reserves the right to cancel an auc�on, earlier than

reported on the website, or to extend one.

Ar�cle 5. Security

5.1 Industrial Auc�ons strives to secure its systems against loss of data and/or any form

of unlawful use and takes appropriate technical and organiza�onal measures, including

taking into account the state of the technology.

5.2 Industrial Auc�ons is not liable for loss of data, damage to files, unlawful access to

computers or files, viruses spread via the website or other unlawful programs or files or

any other consequence of the use made of the website.

5.3 The website may contain links to other websites. Industrial Auc�ons has no control

over such sites and is not responsible for the content of those sites.

Ar�cle 6. Descrip�on lots

6.1 Industrial Auc�ons and the person on whose behalf the lot will be auc�oned strive

to achieve the greatest possible accuracy and clarity of the descrip�on of a lot on the

website, auc�on catalogs, other auc�on brochures, adver�sements and such, without

any liability for damages arising from incorrect or incomplete descrip�ons or other

damage.

6.2 Pipes, cables and/or other connec�ons for energy, control or produc�on that are

located on/in a lot are to be, unless expressly stated in the Specific Online Auc�on Terms

and Condi�ons stated, only sold to the first valve, fi�ng or aplied mark. Underground or

built-in connec�ons never are part of the lot, unless explicitly stated otherwise in the

Specific Online Auc�on Terms and Condi�ons.

Ar�cle 7. Adjustments; opera�on

7.1 If and insofar as any clause of these General Terms and Condi�ons is invalid or


unenforceable, the remaining clauses of these General Terms and Condi�ons will remain

valid. Industrial Auc�ons will then adopt a new clause to replace the invalid/annuled

clause, as far as possible the scope of the invalid/annuled clause shall be respected.

7.2 Industrial Auc�ons can, in addi�on to these General Terms and Condi�ons, declare

the Specific Online Auc�on Terms and Condi�ons applicable. They are therefore already

accepted by the user. In case of contradic�on prevails the clause of the Specific Online

Auc�on Terms and Condi�ons over the clause in these General Terms and Condi�ons.

7.3 The present General Terms and Condi�ons may be deviated only when this is

s�pulated in wri�ng by an authorized representa�ve of Industrial Auc�ons.

7.4 Industrial Auc�ons reserves the right to modify these General Terms and Condi�ons.

Changes take effect 24 hours a�er an e-mail is communicated to the user or if they

(digital) have been accepted comes into effect.

Ar�cle 8. Auc�on organiza�on by Industrial Auc�ons

8.1 The organiza�on, prepara�on and execu�on of the auc�on lie with Industrial

Auc�ons.

8.2 Industrial Auc�ons has the authority before, during or a�er the auc�on without

assigning any reasons:

- Not to recognize a bid as such;

- To exclude one or more users from the auc�on;

- To consolidate ar�cles into lots, to split lots and take lots from the auc�on;

- To repair mistakes made by Industrial Auc�ons in bids and/or alloca�ons, without a

user is able to make use of these errors and/or derive any rights from them;

- Lots whether or not to allocate;

- To implement other, in the opinion of Industrial Auc�ons, useful or necessary measures

or changes;

8.3 Industrial Auc�ons is authorized before par�cipa�on in certain auc�ons and/or bids

on certain lots to require prior, from the user, a bank guarantee or other form of security

to the choice and sa�sfac�on of Industrial Auc�ons (to be judged by Industrial Auc�ons)

8.4 The judgment of Industrial Auc�ons concerning what has taken place before, during

or a�er the auc�on, is binding.

Ar�cle 9. Bid; Purchase Agreement

9.1 The user can place a bid on the website on one or more lots. Every bid is

uncondi�onal, irrevocable and without reserva�on. Industrial Auc�ons and/or the seller

is/are en�tled, without giving any reason not to accept bids. Bids are placed exclusive

buyers premium and VAT. Industrial Auc�ons is authorized to place bids on behalf of

third par�es.

9.2 If a lot is accompanied by one or several other lots as a combina�on in auc�on this


shall be indicated on the page of the individual lot. In that case, there can be placed bids

first on the individual lots of the combina�on and a�er the closing of all individual lots,

offered on the combined lot. Individual lots can be allocated only if the total amount of

the highest sustainable bids on the individual lots is higher than the highest sustainable

bid on the combina�on. The combina�on will be allocated solely if the highest

sustainable bid on the combina�on is higher than the total amount of the highest

sustainable bids on the individual lots.

9.3 Bids can be placed in the form of a "sta�c bid" or a "proxy bid". In a sta�c bid, the

user places a bid in the form of a fixed amount per lot. In a proxy bid the user indicates

the maximum price he is willing to pay for the lot. The auc�on system then ensures that,

a�er outbidding by a third party, in the name of the user, the minimally possible higher

bid is introduced, as long as the maximum indicated by the user has not been reached. A

proxy bid can only be disabled by the user by placing a sta�c bid that at that moment is

the highest bid.

9.4 The purchase agreement arises through alloca�on. Alloca�on is generally given to

the user who has made the highest bid. By applying the clause of ar�cle 9.1, through

condi�ons for alloca�on as included in the Specific Online Auc�on Terms and Condi�ons

or for other reasons at the discre�on of Industrial Auc�ons may be allocated to a

different user than the user who has placed the highest sustainable bid instead.

9.5 The buyer will get within 48 hours a�er the auc�on has been closed, at least as

quickly as possible (Saturday, Sunday and holidays not included) confirmed by e-mail on

behalf of the seller(s) that the purchase agreement has been concluded. If the user does

not get an e-mail within the period men�oned above, this means that his bid has not

been allocated. Industrial Auc�ons reserves the right not to allocate or to allocate under

suspensive condi�on(s).

9.6 The risk of the lot(s) is transferred from the seller to the buyer at the moment of

alloca�on. The seller is up to the alloca�on obliged to properly insure the goods and

maintain properly insured against fire, explosion and water damage and the�. Seller is

also obliged to take out adequate insurance and liability insurance and maintain so. The

policies and the proof of premium payment of these insurances (or at least copies of

them) must be provided by seller on first request to Industrial Auc�ons.

9.7 Industrial Auc�ons is not a party to the purchase agreement but merely mediates in

the crea�on of purchase agreements between buyer and seller. Its content is always

precisely defined. Seller and buyer realize there on the part of Industrial Auc�ons may

involve a conflict of interest. Buyer and seller hereby give permission to Industrial

Auc�ons for simultaneously serving (the interests of) the buyer and seller.

9.8 If there is a forced sale, this will be stated in the Specific Online Auc�on Terms and

Condi�ons.

9.9 In the event seller is a trustee in his capacity as receiver, ar�cle 7:19 Civil Code


applies.

9:10 If the auc�on takes place in the presence of a notary or bailiff, he will supervise the

auc�on and the bids placed there and alloca�ons.

Ar�cle 10. Guarantees, claims and indemni�es

10.1 Industrial Auc�ons sells third party products, for third par�es. Seller and buyer

realize that Industrial Auc�ons is unaware or may be of the nature, condi�on or similar

of the sold. Industrial Auc�ons and/or the seller provide regarding the lots and possible

claims of third par�es to these, no warran�es of any kind. Buyer waives all rights which

do not belong to the buyer under mandatory law.

10.2 The lots are sold in the state in which they exist on the date of alloca�on with all its

possible defects, benefits and burdens. Industrial Auc�ons and/or seller give in no

indemnity for visible or hidden defects or warranty in connec�on with completeness,

numbers, func�oning, usability, saleability, the existence or absence of rights or claims

of third par�es and or the possibility of transfer to third par�es. Defects of whatever

kind, disappointed expecta�ons of the buyer and/or receiving third par�es do not

provide any en�tlement to (damage) compensa�on and/or se�lement and/or

suspension. The buyer shall be deemed to have carefully examined the lot bought by

him beforehand.

10.3 If in respect of the lots claims of third par�es arising from property reserved,

(intellectual) property rights and/or other third party rights be exercised, Buyer shall

keep the relevant lot(s) for those third party(ies), under the obliga�on to issue this first

request to that third party(ies), or otherwise to make appropriate arrangements with

such third par�es.

10.4 The seller shall indemnify Industrial Auc�ons against each claim of third party(ies).

The buyer indemnifies Industrial Auc�ons and/or the seller against each claim by a third

party in connec�on with the purchase agreement.

Ar�cle 11. Payment obliga�ons of the buyer

11.1 The buyer has the obliga�on to pay the purchase price within three days (not

including Saturday, Sunday and holidays) a�er confirma�on of the purchase agreement

on a by Industrial Auc�ons indicated account number. Payment must be made in Euros

or in another currency indicated by Industrial Auc�ons.

11.2. The buyer is not en�tled to any se�lement or suspension.

11.3 The buyer is obliged to first request to provide (addi�onal) security (such as a bank

guarantee and or pledge). The buyer hereby grants an irrevocable power of a�orney to

Industrial Auc�ons to (do) se�le rights of pledge both before and a�er delivery on

behalf of the buyer for the benefit of Industrial Auc�ons. The buyer declares to be

authorized to do so.


11.4 In case of late payment of the purchase price 15% of the purchase price, being a

fixed amount for collec�on costs and/or extrajudicial costs, will be charged to the buyer

by Industrial Auc�ons plus the statutory interest on the outstanding amount plus 3% per

year, with effect from the date the payment had to be made un�l the date of effec�ve

payment.

Ar�cle 12. Viewing days, auc�on days, pick-up days

12.1 The seller and/or Industrial Auc�ons can organize viewing days and pick-up days.

The par�es realize that Industrial Auc�ons does not have any influence or control over

the goods, the loca�on or the circumstances in which the viewing days and pick-up days

are being organized. Therefore, Industrial Auc�ons can not accept any liability. Whoever

enters buildings and/or grounds on viewing days or delivery days does so en�rely at

their own risk. It is compulsory to follow up instruc�ons given by Industrial Auc�ons

and/or by Industrial Auc�ons hired people. Industrial Auc�ons and the seller do not

accept any liability for damage arising on viewing days, or entering the buildings or

grounds or the consequences that that entails.

Ar�cle 13. Delivery

13.1 If and as soon as the buyer has met all his payment obliga�ons, the buyer may pick

up the lot(s) at the by Industrial Auc�ons determined �mes and place on presenta�on of

a proper iden�fica�on, being the delivery. The delivery is fully at the expence and risk of

the buyer. The buyer is obligated to pick up the lot(s) not later than the date specified in

the Specific Online Auc�on Terms and Condi�ons. Industrial Auc�ons can s�pulate that

(a) certain(e) lot(s) can be picked up only a�er the picking up of other lots.

13.2 Before delivery the buyer is deemed to have fully explored the lot well and buy the

lot in the condi�on in which it is. A�er the delivery the purchase agreement can no

longer be terminated or destroyed by the buyer. Pipes, cables and/or other connec�ons

that are located on/in a lot are to be, unless otherwise provided by law or Industrial

Auc�ons expressly stated otherwise, only part of the purchased up to the first valve,

fi�ng, or the applied mark. Underground or built-in pipes, cables or other connec�ons

are not part of the purchased, unless explicitly stated otherwise by Industrial Auc�ons.

13.3 If it appears that a lot can not be delivered because of claims by third par�es or

because of the fact that the delivery would cause unacceptable damage to the buildings

or premises where the lot is situated or for other reasons appears to be objec�onable

(at the discre�on of Industrial Auc�ons), Industrial Auc�ons is en�tled to terminate the

purchase agreement. This termina�on occurs by e-mail and/or registered le�er to the

buyer at the address supplied by the buyer, wherea�er Industrial Auc�ons and/or the

seller have no further obliga�on than to refund already made payments by the buyer to

Industrial Auc�ons in respect of the purchase of the lot(s).

13.4 The buyer whose lot(s) obstructs the collec�on of other lots, is obliged immediately


a�er e-mail and/or summons by Industrial Auc�ons to the address specified by the

buyer to take care of the collec�on of his lot(s), failing which Industrial Auc�ons is

en�tled to make this collec�on and possible storage happen by third par�es for the

account of the buyer.

13.5. Ownership of the goods passes a�er delivery, but not before the buyer has fulfilled

all his obliga�ons (and the seller or other third par�es have given their consent). A�er

alloca�on the buyer is obliged to properly insure and maintain properly insured against

fire, explosion, water damage and the� and to provide the insurance policy and proof of

premium payment of this insurance on first request to Industrial Auc�ons. The buyer is

obliged to respect rights of third par�es.

Ar�cle 14. Termina�on

14.1 If the buyer fails to perform any obliga�on under the agreement with Industrial

Auc�ons or the purchase agreement, including but not limited to failure to �mely or

complete payment of the purchase price; not picking up the lot(s) in �me and/or not

providing the required informa�on for delivery, finds the buyer is legally in default

without further no�ce being required, and Industrial Auc�ons may terminate the

agreement between herself and the buyer. Industrial Auc�ons may terminate the

purchase agreement on behalf of the seller. In that case Industrial Auc�ons is allowed to

assign the lot(s) to another without Industrial Auc�ons and/or the seller is/are held to

any (damage) compensa�on.

14.2 In the event of termina�on referred to in 14.1, the buyer owes Industrial Auc�ons

in addi�on to the buyers premium a lump sum amount of 25% of the purchase price to

cover administra�ve, storage, insurance and transport costs, etc., undiminished the

right of Industrial Auc�ons and/or the seller to claim full compensa�on.

Ar�cle 15. Liability

15.1 Industrial Auc�ons works on loca�ons which she has no control over, with things

that are not hers. Therefore she must limit her liability, otherwise she runs too much

risk, while she herselve is not in a posi�on to limit the risks. Industrial auc�ons is not in

control of the sites, auc�ons, IT environments and auc�oned goods. The liability of

Industrial Auc�ons (if and when a�er applica�on of the other provisions of the contract

s�ll remaining) is at all �mes and in all cases limited to the amount to which the liability

insurance of Industrial Auc�ons in a given case en�tlement to benefits. If Industrial

Auc�ons is uninsured, the insurer will not cover grants or for whatever reason, no

payment takes place, then the liability of Industrial Auc�ons in any case is limited to €

5,000.00. Any claim on Industrial Auc�ons (both property law and contract law), is not

transferable or to encumber. This limita�on does not apply to intent or gross negligence

of Industrial Auc�ons.


15.2 Industrial Auc�ons is not liable for any indirect or consequen�al damages.

Compensa�on for indirect damage is excluded at all �mes and in all cases, including at

least but not limited to consequen�al damages, lost profits, lost savings and damage due

(corporate) stagna�on, loss of goodwill, loss of data, and such. Furthermore, any liability

of Industrial Auc�ons is excluded in connec�on with any defect of the lot(s) or in respect

of (alleged) infringement of the rights of (the intellectual property of) third par�es. The

buyer declares that he acknowledges that in respect of the lot(s) possibly rights (of

intellectual property) rest with third par�es.

15.3 Industrial Auc�ons and the seller are not liable for:

- Damage to persons or property or business prior to the closing of the purchase

agreement or prior to alloca�on arising or resul�ng;

- Damage to on, through or in connec�on with the purchased goods caused (including

the loss of the good itself);

- Visible and invisible defects. The buyer is required to do research. If the buyer neglects

that, then the consequences are for the buyer;

- Damage caused by environmentally harmful substances in or on the purchased;

- Damage caused by computer failures (both in terms of hardware, so�ware, viruses,

files, internet, all in the broadest sense);

- Damage caused by power of disposi�on of the seller or rights of third par�es which

causes damage to the buyer;

15.4 In engaging third par�es Industrial Auc�ons will always exercise due care. Industrial

Auc�ons is not liable for any shortcomings of these third par�es. For that the seller and

the buyer safeguard Industrial Auc�ons.

15.5 Any right of the buyer or the seller shall expire two months a�er the alloca�on,

notwithstanding the provisions to art. 6:89 BW.

Ar�cle 16. Applicable law

16.1 All agreements between Industrial Auc�ons and third par�es is governed by Dutch

law.

16.2 The Dutch text of the General Terms and Condi�ons is the original text. If the

General Terms and Condi�ons are used in several languages, the Dutch text will

therefore be given preference in case of ambigui�es or contradic�ons.

16.3 In the event of a dispute, the competent court within the district of “Oost-Brabant”

has jurisdic�on to hear the dispute, notwithstanding the competence to Industrial

Auc�ons to submit a dispute to the competent court according to the law.


Notes


Address: Looyenbeemd 11

5652 BH Eindhoven, NetherlandsTel.: +31 (0)40 2409 208 Fax: +31 (0)40 2409 209 Email: info@industrial-auc�ons.com Web: www.industrial-auc�ons.com

Upcoming auc�ons:12-07 Online auc�on used food machinery on behalf of Queally

Group in Naas (IE) 03-07 Online auc�on fish processing machinery and inventory on

behalf of Klaas Puul België NV formerly Akta NV in Puurs (BE) 03-07 Online auc�on machinery and inventory on behalf of Klaas

Puul BV in Volendam (NL) 05-07 Online auc�on machinery and inventory for the food industry

on behalf of Feldhues Fleischwarenbetriebe GmbH inMetelen (DE)

17-07 Online auc�on vegetable and meat processing machinery onformer loca�on Kuijten Verswaren in Eindhoven (NL)

24-07 Online auc�on machinery for the complete food industry onbehalf of Windsor Food Machinery Ltd in Ashford (UK)


mailto:[email protected]

https://www.industrial-auctions.com

online auc on ﬁsh and meat processing machinery in urk (nl)

Documents