Upload File

one-piece check valves - superlok fittings and valves€¦ · check valve series one-piece body...

  • Home
  • Documents
  • ONE-PIECE CHECK VALVES - Superlok Fittings and Valves€¦ · CHECK VALVE SERIES One-piece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with
4
CHECK VALVE SERIES One-piece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with viton seal standard. Cracking pressure fixed from 1/3 to 25psig (0.02 to 1.7 bar) NPT and ISO pipe end connections 316 stainless steel and brass materials Each and every valve is tested at the factory. Features ONE-PIECE CHECK VALVES SOCV SERIES Technical Data Nominal Cracking Pressure Maximum Working Pressure at 70 (20 ) Maximum Back Pressure at 70 (20 ) 1/3, 1, 10 and 25psig (0.02, 0.06, 0.68,1.7bar) 3000psig (206bar) 3000psig (206bar) Flow Coefficient (Cv) SOCV1 / SOCV2 : 0.35 SOCV3 / SOCV4 : 1.20 Temperature Rating VITON O-ring : -10 to 375 (-23 to 190 ) NBR O-ring : -10 to 250 (-23 to 121 ) (add “N” to the end of ordering number) Cracking Pressure and Reseal Pressure SOCV Series Valves with nominal cracking pressure of 20 psig (1.3 bar) or lower may requir back pressure to reseal bubble-tight. All valves are factory tested for cracking pressure and reseal performance. Testing © Phone: 405-509-2665 Fax: 866-239-1587 408 Wimbledon Rd., Edmond, OK 73003 www.mako-products.net © , subject to change ©

Upload: others

Post on 21-Aug-2020

4 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: ONE-PIECE CHECK VALVES - Superlok Fittings and Valves€¦ · CHECK VALVE SERIES One-piece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with

CHECK VALVE SERIES

One-piece BodyWorking pressure up to 3000 psig (206bar)Temperature rating up to 375 (190 ) with viton seal standard.Cracking pressure fixed from 1/3 to 25psig (0.02 to 1.7 bar)NPT and ISO pipe end connections316 stainless steel and brass materialsEach and every valve is tested at the factory.

Features

ONE-PIECE CHECK VALVESSOCV SERIES

Technical DataNominal Cracking PressureMaximum Working Pressure at 70 (20 )Maximum Back Pressure at 70 (20 )

1/3, 1, 10 and 25psig (0.02, 0.06, 0.68,1.7bar)3000psig (206bar)3000psig (206bar)

Flow Coefficient (Cv)SOCV1 / SOCV2 : 0.35SOCV3 / SOCV4 : 1.20

Temperature RatingVITON O-ring : -10 to 375 (-23 to 190 )NBR O-ring : -10 to 250 (-23 to 121 )

(add “N” to the end of ordering number)

Cracking Pressure and Reseal PressureSOCV Series Valves with nominal cracking pressure of 20 psig (1.3 bar) or lower may requirback pressure to reseal bubble-tight.

All valves are factory tested for cracking pressure and reseal performance.Testing

©

Phone: 405-509-2665 Fax: 866-239-1587 408 Wimbledon Rd., Edmond, OK 73003www.mako-products.net

©

, subject to change

©

Page 2: ONE-PIECE CHECK VALVES - Superlok Fittings and Valves€¦ · CHECK VALVE SERIES One-piece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with

CHECK VALVE SERIES

Table of Dimensions

Part No.SeriesnoitcennoC dnErebmuN redrO

teltuOtelnIA h Hex

mm (in.)

SOCV1M-4N

M-4R

F-4N

F-4R

MF-4N

FM-4N

M-8N

F-8N

MF-8N

1/4 Male NPT

1/4 Male ISO

1/4 Female NPT

1/4 Female ISO

1/4 Male NPT

1/4 Female NPT

1/2 Male NPT

1/2 Female NPT

1/2 Male NPT

1/4 Male NPT

1/4 Male ISO

1/4 Female NPT

1/4 Female ISO

1/4 Female NPT

1/4 Male NPT

1/2 Male NPT

1/2 Female NPT

1/2 Female NPT

61.2

64.5

44.5

58.2

57.9

94.2

71.9

41.2 14.29 (9/16)

19.05 (3/4)

22.22 (7/8)

26.9 (1-1/16)

SOCV2

SOCV3

SOCV4

Materials of Construction

No. ComponentValve Body Materials

ssarBleets sselniatS1

2

3

4

5

6

316SS / A276

316SS / A276

VITON

316SS / A276

316SS / A276

SS304

Brass

Brass

NBR

Brass

Brass

Insert Lock Screw

Insert

O-Ring

Poppet

Spring

Body

Ordering informationSOCV1 - M - 4N - 1P - SS

1 2 3 4 51 : Valve Series 2 : End Connection Type 3 : Connection Size4 : Cracking Pressure Designator(1/3P : 1/3psig, 1P : 1psig, 10P : 10psig, 25P : 25psig)5 : Body Material Designator [SS : 316 stainless steel(standard), B : Brass]

All dimensions are for reference only, subject to change.

©

Phone: 405-509-2665 Fax: 866-239-1587 408 Wimbledon Rd., Edmond, OK 73003www.mako-products.net

©

, subject to change

©

Page 3: ONE-PIECE CHECK VALVES - Superlok Fittings and Valves€¦ · CHECK VALVE SERIES One-piece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with

CHECK VALVE SERIES

One-Piece body

Working pressure up to 3000psig (206 bar)

Cracking pressure adjustable from 3 to 600psig (0.2 to 41.3bar)

NPT and ISO pipe end connections in 1/4 and 1/2 in. sizes

316 stainless steel and brass materials

Each and every valve is tested at the factory.

Features

ONE-PIECE ADJUSTABLE CHECK VALVESSOACV SERIES

Technical Data3VCAOS2VCAOS / 1VCAOSseireS

3 to 50psi (0.2 to 3.4bar)50 to 150psi (3.4 to 10.3bar)

150 to 350psi (10.3 to 24.1bar)350 to 600psi (24.1 to 41.3bar)

3000psig (206bar)

VITON O-Ring : -10 to 375 (-23 to 190 )NBR O-Ring :-10 to 250 (-23 to 121 )

02.153.0

Cracking Pressure Ranges

Working and Back Pressure at 70 (20 )

Temperature Rating

Flow Coefficient (Cv)

Cracking and Reseal Pressure at 70 (20 )

All valves are factory tested for cracking pressure and reseal performance.Testing

©

Phone: 405-509-2665 Fax: 866-239-1587 408 Wimbledon Rd., Edmond, OK 73003www.mako-products.net

©

, subject to change

©

Page 4: ONE-PIECE CHECK VALVES - Superlok Fittings and Valves€¦ · CHECK VALVE SERIES One-piece Body Working pressure up to 3000 psig (206bar) Temperature rating up to 375 (190 ) with

CHECK VALVE SERIES

Table of Dimensions

Order NumberSeries Part No. A(mm)End Connections h HEX

mm (in.)

SOACV1M-4NM-4RF-4NM-8NM-8R

1/4 Male NPT1/4 Male ISO

1/4 Female NPT1/2 Male NPT1/2 Male ISO

41.141.175.765.065.0

14.29 (9/16)14.29 (9/16)19.05 (3/4)22.22 (7/8)22.22 (7/8)

SOACV2

SOACV3

Materials of Construction

Ordering information

No. ComponentValve Body Materials

ssarBleets sselniatS12345678

316SS / A276316SS / A276

VITON316SS / A276

316SS / A276316SS / A276316SS / A276

SS304

BrassBrassNBRBrass

BrassBrassBrass

Insert Lock Screw Insert

O-RingPoppetSpringBody

Adjusting screwLocking screw

SOACV1 - M - 4N - A - SS1 2 3 4 5

1 : Valve Series 2 : End Connection Type 3 : Connection Size4 : Cracking Pressure Designator (A : 3~50 psi, B : 50~150 psi, C : 150~350 psi, D : 350~600psi)5 : Body Material Designator [SS : 316 stainless steel(standard), B : Brass]

All dimensions are for reference only, subject to change.

©

Phone: 405-509-2665 Fax: 866-239-1587 408 Wimbledon Rd., Edmond, OK 73003www.mako-products.net

©

, subject to change

©


KLINGER Monoball One-piece ball valves · Edition 2011 KLINGER Monoball® One-piece ball valves

Three piece ball valves - Chemie-Technik · 2019-01-30 · 3 Three piece valves Three piece valves HermetiX™ Habonim standard valves that include the HermetiX™ stem seal have

Nozzle Check Valves

Pool Valves / TruSeal Diverter Valves and Swing Check Valves

One-Piece Instrumentation Ball Valves

Abacus Valves | Wafer Check Valves | Abacus Valves

& Other Special Check Valves · DUAL PLATE CHECK VALVES ICARUS & Dual Plate check valves ICARUS is the design and manufacturing centre dedicated to Dual Plate and special check valves,

SUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES ... · PDF fileSUBJECT: HYDRAULIC CHECK VALVES AND FLOW CONTROL VALVES ABOUT THE SESSION This session deals with check valves,

2-piece Ball Valves

1, 2 & 3 PIECE BALL VALVES TRUNNION VALVES FLANGED …

CHECK VALVES SECTION - OMB Valves

3-Piece Trunnion Ball Valves - API 6D Full & Reduced Port Bolted & Welded Body ...€¦ ·  · 2015-03-173-Piece Trunnion Ball Valves ... FLOATING BALL VALVES 1-PIECE REDUCED PORT

Swing Check Valves

Gate Valves Globe Valves Check Valvesvalvesandfittingsofhouston.com/pdf/Crane/CraneIronValves.pdf · Check Valves Globe Valves Gate Valves IRON VALVES The Valve Experts- - ... Crane

Three piece ball valves - Corona Control®€¦ · 2 Floating Ball alves Three piece valves Introduction Habonim 3-piece ball valves 47 series Habonim line of 3-piece ball valves

SWING CHECK VALVES - BFE - Bonney Forge Check Valves.pdf · STANDARD CONFIGURATIONS BASIC SWING CHECK VALVE DESCRIPTION Swing check valves, like all check valves, are used to prevent

Non-Slam Check Valves Swing Check Valves · check valves, while comparing their unique uses and benefits. Key Differences Between Non-Slam and Swing Check Valves Some styles of check

Miniature Check Valves

CHECK VALVES - Poclain Hydraulics...POCLAIN HYDRAULICS Hydraulic components - Check valves Direct operated valves Counterbalance valves Pilot operated valves CHECK VALVE VP-NV (NG

Stop check valves Check valves type CHV 15 - 125 · Stop check valves type SCA 15 - 125 Check valves type CHV 15 - 125 REFRIGERATION AND AIR CONDITIONING Technical leafl et

Pilot Controlled Check Valves - anhussunally.com€¦ · Pilot Controlled Check Valves DIRECTIONAL CONTROLS Pilot Controlled Check Valves These check valves allow flow in one direction

Gate Valves and Check Valves

Ritepro Check Valves

Product Catalog - Quantum Supply Limited · 2018-04-20 · 4 Check Valves Flanged Check Valves Threaded Check Valves Miscellaneous Check Valves Guardian SeriesAPI 6D Non-Slam Piston

Three piece ball valves - habonim.com · 3 Three piece valves Three piece valves HermetiX™ Habonim standard valves that include the HermetiX™ stem seal have passed the rigorous

One Piece, Flanged, Standard Port Ball Valves - Valbol · Series / / One Piece, Flanged, Standard Port Ball Valves Rev | | VW// One Piece, Flanged, Standard Port Ball Valves Designed

VALVES - flowtec.at · Check Valves / Nozzle Check Valves .....44 Swing Check Valves

Products Include Check Valves, Ball Valves, Angle Valves

Check/Pilot Controlled Check Valves Check/Pilot Controlled Check Valves In-Line Check Valves These valves allow free flow in one direction and prevent flow in the reverse direction

Instrument valves and double block and bleed valves · Instrument check valves - CV range Compact one piece design Increased flow for 1/2” to 1” bore sizes A unique dual metal

Check valves: Effective protection for your equipment · HOERBIGER check valves ... ditions, the HOERBIGER check valve is reliable, safe and efficient. HOERBIGER check valves have

econ Butterfly valves, Check valves, Globe valves, Strainers

Check Valves Contents

CHECK VALVES - Maass Midwestmaassmidwest.com/PDFs/Maass_Midwest_Catalog_580.pdf · 2020. 8. 7. · DUCTILE IRON CHECK VALVES DUCTILE IRON CHECK VALVES 600 SPRING LOADED CHECK VALVE

CHECK VALVES