TurnPro™

mySSPusa.com/TurnPro

INDEXING HANDLE TUBE BENDER The TurnPro Indexing Handle Tube Benders perform bends up to 180° in a single opera on. A patented quick-release trigger allows users to reposi on handles as they come together, elimina ng crossed handles and making bends greater than 90° faster and easier. Available for 1/4”, 3/8”, 1/2”, 6mm, 8mm, 10mm and 12mm tubing.

KEY BENEFITS

Bend greater than 90° in a single opera onNo scoring of tubing

KEY FEATURES

Eliminate crossed handles Comfortable Grip

Reduced fric on and bending eff ort

Rollers in handle reduce friction and bending effortSuitable for stainless steel, alloys and other hardened tubing

Suitable for high-cycle tube bendingNo disassembly and reas- sembly of bender handles

Quick-release trigger allows quick indexing of the handle

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-HTB-4 1/4” Bender $140.00TP-HTB-6 3/8” Bender $256.00TP-HTB-8 1/2” Bender $396.00TP-HTB-6M 6MM Bender $140.00TP-HTB-8M 8MM Bender $256.00TP-HTB-10M 10MM Bender $256.00TP-HTB-12M 12MM Bender $396.00

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

TUBE CUTTER The TurnPro Tube Cu ers are specifi cally designed for cu ng stainless steel, Alloy - 400, Alloy C-276 and other hardened steel tubing from 1/8 to 1 1/8 inch(4 to 28 mm). The unique an -spiral roller design eliminates spiraling for precise right angle cuts. A one-piece screw-type axle provides easy access to the cu ng wheel, there is no clip to lose or replace. Each tool comes with a spare cu er wheel.

KEY BENEFITS

Smooth, precise, spiral-free, tube cu ng

KEY FEATURES

Compact swing radiusEasy Maintenance

Spare Cu er WheelTrouble-free, high-cycle opera on

Retractable ergonomic rotary style reamer Unique Anti-Spiral Rollers

Durable FinishLightweight BodyThrust bearing feed mechanism

Chromium Steel Cutter Wheels

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-TC-316 Tube Cu er $52.00TP-TCW-316 Replacement Wheel 5 pack $41.50

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

INNER OUTER REAMING AND DEBURRING TOOL The TurnPro TDT Inner-Outer Reaming and Deburring tool provides a fast one-step method for preparing tube ends prior to tube fi ng installa on. Deburring can help ensure that tubing seats properly into the tube fi ng. It also can remove burrs from the inside edge of the tube to prevent them from obstruc ng the fl ow path or entering the system.

KEY BENEFITS

Ream and deburr inside and outside of tube ends

KEY FEATURES

Durable BodyComfortable Grip

Clockwise and Counter Clockwise Opera on

Three Hollow-ground cuttersTough die cast body

Tungsten hardened steel blades

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-TDT-24 Tube Deburring Tool, 3/16” to

1-1/2” and 4mm to 38mm OD$69.04

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

RATCHET WRENCHES The TurnPro ratchet wrenches speed installa on of tube fi ngs and valves, hex nuts, bolts and fasteners. The open jaw design makes it easy to slip onto and ghten fi ngs and fasteners, even in ght spaces.

KEY BENEFITS

Heavy-Duty Construc on for long service lifeEasy to secure posi on

KEY FEATURES

No warping or distor ng of fi ngs or fasteners

Ratchet indexes in 1/12 turn increments making working in restricted spaces easier

Hardened steel jaws Heavy gauge alloy steel handles Fractional hex sizes: 9/16, 5/8, 11/ 16, 13/16, 1, and 1 1/8 in

Metric hex sizes:12, 14, 16, 19, and 22 mm Open jaw design

12 -point contact distributes torque pressures evenly

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-RW-04 1/4” Tube Fi ng Wrench $31.60TP-RW-05 5/16” Tube Fi ng Wrench $31.60TP-RW-06 3/8” Tube Fi ng Wrench $31.60TP-RW-08 1/2” Tube Fi ng Wrench $37.80TP-RW-10 5/8” Tube Fi ng Wrench $37.80TP-RW-12 3/4” Tube Fi ng Wrench $84.60TP-RW-M3 3MM Tube Fi ng Wrench $35.80TP-RW-M6 6MM Tube Fi ng Wrench $38.50TP-RW-M8 8MM Tube Fi ng Wrench $39.60TP-RW-M10 10MM Tube Fi ng Wrench $39.60

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

PTFE TAPEThe TurnPro Pipe Thread Sealant is for use on male tapered pipe threads. PTFE tape enhances sealing by fi lling any voids in the threads and reduces the poten al for galling or seizing if the threadsare forced together by over ghtening.

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-PTFET-4 PTFE Tape 1/4" $2.50TP-PTFET-8 PTFE Tape 1/2" $2.50TP-V-NCT-4 Nickel Impregnated PTFE Tape 1/4" $4.00TP-V-NCT-8 Nickel Impregnated PTFE Tape 1/2" $4.00

KEY FEATURESAvailable in 1/4” and 1/2” sizesTemperatures up to 450°F (232°C)

Meets Mil Spec A-A 58092 Nickel Impregnated option also available

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

MANUAL PRE SWAGING TOOL The TurnPro TPS Manual Pre-Swaging Tool pre-sets any brand of compression tube fi ng ferrules on to the tube prior to installa on. This makes tubing system installa on faster and easier, especially when tube fi ngs are used in ght or hard to reach places.

KEY BENEFITS

Light weightFits in Tool Box

KEY FEATURES

Allows pre-swaging on siteDurable

Compact size Flat sides fit securely in a vise

Thread cap protects threads during storage

Durable hardened steel tooling for long service life

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-MPT-2 1/8” Tool $45.00 TP-MPT-4 1/4” Tool $45.00 TP-MPT-6 3/8” Tool $45.00 TP-MPT-8 1/2” Tool $50.00 TP-MPT-12 3/4” Tool $60.00 TP-MPT-16 1” Tool $60.00 TP-MPT-M6 6MM Tool $45.00 TP-MPT-M10 10MM Tool $50.00 TP-MPT-M12 12MM Tool $60.00 TP-MPT-M16 16MM Tool $60.00

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

LIQUID LEAK DETECTORThe TurnPro Liquid Leak Detector was developed to detect gas leaks in hard to reach places. The formula is nontoxic, noncorrosive, nonfl ammable, and it dries clean. Flexible extension tube is included to help get to hard to reach areas.

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Hold tube end at the connec on to be tested.Squeeze bo le un l TurnPro Liquid Leak Detector covers the area to be tested. If bubbles form, there is a leak.

LEAK DETECTOR INSTRUCTIONS

Part Number Descrip on List PriceTP-LLD-8 8oz bo le - sold in 12 packs $55.20 (12 pack)

100% Made in the U.S.A.

Temperature Range 32°F (0°C) to 200°F (93°C) Composi on: Deionized water and surfactant

LEAK DETECTOR TECHNICAL INFORMATION

TurnPro™

mySSPusa.com/TurnPro

HYDRAULIC SWAGING TOOL The TurnPro Hydraulic Swaging Toolswages 3/4” inch and larger SSP Duolok tube fi ngferrules onto the tubing prior to assembly to thefi ng body. Using hydraulic pressure, the SSPHydraulic Swaging Tool overcomes the challengeof manually applying the torque required to install3/4” inch and larger tube fi ngs. The SSPHydraulic Swaging Tool reduces installa on meand assures suffi cient make-up for leak- ghtconnec ons on larger Duolok tube fi ng sizes.

KEY BENEFITS

Places no initial strain on nut, fitting body threads or fitting body sealing surfaces.

KEY FEATURES

Preswages SSP Duolok tube fi ng ferrules onto tubing.

Installed fittings are 100% gaugeable.

Quick and easy tooling changes to install 3/4”, 1”, 1-1/4”, 1-1/2” and 2” Duolok tube fittings.

Instructions printed on tool base.View window for verification of complete swage.

Rugged plastic, wheeled case with pull handle.Minimal setup time.

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceTP-ITSD1632HST Swage Tool Assembly $6,500.00TP-ITSD32HSTP Swage Tool Piston 2” $500.00TP-ITSD2024HSTA Swage Tool Adapter 1-1/4” - 1-1/2” $500.00TP-ITSD24HSTP Swage Tool Piston 1-1/2” $500.00TP-ITSD20HSTP Swage Tool Piston 1-1/4” $500.00TP-ITSD16HSTA Swage Tool Adapter 1” $500.00TP-ITSD16HSTP Swage Tool Piston 1” $500.00TP-ITSD12HSTA Swage Tool Adapter 3/4” $500.00TP-ITSD12HSTP Swage Tool Piston 3/4” $500.00

Available Spring 2013Available Spring 2013

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

GAP GAGEThe TurnPro Gap Gages allow the installer or inspector to verify proper ghtening of a tube fi ng, prior to pressurizing a system. Gageability provides addi onal reliability for proper installa on and ul mate tube fi ng safety and performance.

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Follow proper installa on instruc ons (as supplied with the fi ngs, or published in the Duolok and Unilok catalog).A er comple on of the installa on instruc ons and prior to pressuring the system, choose the proper size Gap Gage and try to insert it between the fi ng’s nut and body hex. If the Gap Gage will not enter between the fi ng’s nut and body hex, no addi onal ghtening is required. (See Figure #1)If the Gap Gage will enter between the fi ng’s nut and body hex, addi onal ghtening is required. (See Figure #2)

GAP GAGE INSTRUCTIONS FIGURE #1

FIGURE #2

Part Number Descrip on List PriceITS-468M10GG Gap Gage 1/4”, 3/8”, 1/2”, $1.50

6mm, 10mm, 12mm ITS-12GG Gap Gage 3/4”, 18mm $7.10ITS-16GG Gap Gage 1”, 25mm $7.10

Addi onal Tightening Required

No Addi onal Tightening Required

Note: Swagelok® Gap Inspec on Gages may also be u lized eff ec vely with Duolok Tube fi ngs. Parker CPI® Inspec on Gages may also be u lized eff ec vely with Unilok Tube Fi ngs.

Swagelok® is a registered trademark of the Swagelok Co.Parker CPI® is a registered trademark of Parker Hannifi n Corp.

100% Made in the U.S.A.

TurnPro™

mySSPusa.com/TurnPro

DEPTH MARKING TOOLSThe TurnPro Depth Marking Tool helps the installer to be sure that the tubing is bo omed properly on the shoulder inside of the tube fi ng body.

DEPTH MARKING TOOL INSTRUCTIONS

SSP 8250 BOYLE PARKWAY TWINSBURG, OH 44087 +1.330.425.4250

Part Number Descrip on List PriceITS4DMT 1/4” Depth Marking Tool $12.10ITS6DMT 3/8” Depth Marking Tool $12.10ITS8DMT 1/2” Depth Marking Tool $12.10ITSM6DMT 6mm Depth Marking Tool $12.10ITSM10DMT 10mm Depth Marking Tool $12.10ITSM12DMT 12mm Depth Marking Tool $12.10

Insert tubing that has been cleanly cut and deburred into the opening of the Depth Marking Tool un l the tubing is bo omed out against the shoulder of the tool. Using a felt p permanent marker mark the tubing at the top of the Depth Marking Tool. Remove the tubing from the Depth Marking Tool. Insert it into the tube fi ng un l it bo oms out against the shoulder of the tube fi ng. Rotate the fi ng nut un l it is fi nger ght. If the mark on the tubing can be seen above the nut the tubing is not fully in- serted into the fi ng.

100% Made in the U.S.A.