bestmdf.com

Ready Panels and Counters

for the Furniture Manufacturing Industrysales@plastixusa.com305-891-0091 / 800-720-0602

contents

2-3 PROLAK® HIGH GLOSS MDF

4-5 PROLAK® colors

ULTRA HIGH GLOSS MDF

high gloss applications

12-13 high gloss colors

14-15 textured melamıne

16-17 WOOD COMPOSITE Countertop

18-19 quıck shıp panel colors

20-21 edgebandıng

22-23 custom sıze doors

24 applications

6-9

10-11

GLOSS PANEL INFORMATION

Prolak® is a specially formulated, mirror-like lacquer application onto an MDF core substrate.

Available in 4'x9' sheets of 18mm (3/4") in either single or double side finish.

It has the most durable scratch resistant finish available in the industry and can even be used on horizontal surfaces.

DescriptionItalian UV Lacquered panels consist of an E-1quality (MDF) substrate with a high gloss UVLacquer top and bottom layer.

ApplicationsPanels are suitable for interior horizontal &vertical surfaces such as kitchen cabinets,vanities, closets, furniture, fixtures & displays,as well as wall panels.

LaminationPanels are lacquered in a Clean room using onlythe best UV lacquers.

SpecificationsPanels are available in 4 ’x 9’ in thicknesses of 8 &18 mm.

Matching 2-Tone acrylic edgebandings are also available to complement the panels.

We stock 5 quick-ship colors for immediate shipment and have a complete range of over 15 patterns available on special order.

Panels are packed and bundled in 25 sheet well protected wooden crates to avoid transport damage.

RoutingRouter cut using a feed rate of 10 to 15meter/minute with a spindle speed of 15- 20,000 rpm. Diamond or solid carbine compression cutters will provide best finish.

Protective FilmAll Plastix products are provided with a protective film which should not be removed until the project is complete.

Saw CutsUse very sharp carbide tipped or diamond blades for best results. We recommend single sheet cutting on panel saws to avoid damage from debris betweensheets.

Why PROLAK by Plastix ?

• The best UV Gloss Lacquer quality

• An extremely high scratch resistance gloss finish

• Cuts like butter

• Standardized color consistency

• Perfect alternative to regular lacquer paint

EdgebandingPlastix recommends using laser, hot air, or PUR edgebanders for best results. EVA can also be used with good results but it’s important to maintain color integrity through proper temperature control and glue pot maintenance. Best results will be achieved byus ing radius tool ing to mat c h the edgebanding thickness.

Use mineral spirits if necessary to remove any glue residue. On some edgebanders it may be necessary to fold the film back from the edge to ensure the film is clear of the glue line.

DrillingDrilling can be done using high speed steelor carbide tipped drills. Best results will beachieved using drills with a tip angle of 110to 130 degrees. Use slow to medium speeds.

PROLAK® HIGH GLOSS MDF

32

PROLAK® COLORS

54

621-CAPPUCINO 1001-WHITE 1005-CREME 1009-BLACK

1901-CHILE LINEN 1902-BEIGE CANVAS 1903-TEXTURE 1904-TERRA CANVAS

1905-STONE CANVAS 1906-NAPPA 1907-ANTIQUE GOLDEN 1908-ANTIQUE STONE

1909-IVORY PEARL 1910-BLACK PEARL 7085-CREME SUPERMATT 7086-WHITE SUPERMATT

7088-DARK RED SUPERMATT 7090-PLUM SUPERMATT 7091- OFF WHITE SUPERMATT 7092-RED SUPERMATT

9342-RED 9343-PLUM D149-DARK RED

ULTRA HIGH GLOSS MDF

Ultra High Gloss Mdf Boards

E-1 Type (No Formaldehyde) MDF Single or Double sided UHG PVC Laminated boards

Size: 4' x 8' sheetsThickness: 18 mmDensity: 750-800 kg/m3PVC Thickness: 0.35 mm

Size: 4' x 8' sheetsThickness: 8 mmDensity: 750-800 kg/m3PVC Thickness: 0.35 mm

Description

Ready laid-up panels consist of an E-1 quality(MDF) substrate with a high gloss PVC film topand bottom layer.

Applications

Panels are suitable for interior vertical surfacessuch as kitchen cabinets, vanities, closets,furniture, fixtures & displays, as well as wallpanels.

Lamination

Films are laminated in a Clean room using onlythe best PUR adhesives to provide a life-time delamination guarantee.

Specifications

Panels are available in 4’ x 8’ and 4 ’x 9’ inthicknesses of 8-12-18 mm.

Matching mono-tone PVC or 2-Tone acrylic edgebandings are also available to complement the panels.

We stock 7 quick-ship colors for immediate shipment and have a complete range of over 60 patterns available on special order. Panels are packed and bundled in 20 sheet well protected wooden crates to avoid transport damage.

RoutingRouter cut using a feed rate of 10 to 15 meter/minute with a spindle speed of 15- 20,000 rpm. Diamond or solid carbine compression cutters will provide best finish.

ULTRA HIGH GLOSS PANEL INFORMATION

76

high gloss colors

Color Options for Ultra High Gloss MDF Boards

63-GOLD 67- ANKASTREMETALIC

136-EBONY 138-ANTHRACITE

166-P.GREEN 168-BLACK 170-BLACK STRIPE

171-BLACK IVY

139-ANTHRACITESTRIPE

141-WHITE

143-WHITE STRIPE

311-BRONZ

747-SUPER MATT NEW GREY

142-WHITE FLOWER

1003-GERMAN OAK 1004-RAFIA

1005-SNAG OAK

576-WHITE TRUVA

577-BLACK TRUVA 618-CREAM EKRU

685-BROWN STONE

969-SAFARI 970-YELLOW STONE

971-WHITE SALKIM

968-BLACK WAWE

716-KALEIDOS 717-POWDER

718-LATTE

773-BLACK PEARL 846-HONEY GLARE

930-CREAM SAHARA

931-CREAM SIMOON

932-BLACK SIMOON

967-WHITE WAWE

619-WHITE PEARL

169-BLACK FLOWER

426-RED STRIPE 545-OLIVE

605-BAMBOO

735-JAPANESE CHERRY

748-SUPER MATT STONE GREY

749-SUPER MATT STORM GREY

750-SUPER MATT BEIGE SANDI

782-PERVINCA 845-BIONCO

667-OLIVE GREEN 680-FUXIA

681-MUSTARD 682-NAVY BLUE 683-PETROL 715-PARLEMENT BLUE

746-SUPER MATT CREAM

144-WHITE CHECKERS

146-BORDEAUX 148-CAPPUCINO 149-BROWN 150-CHESTNUT 152-RED

154-CREAM 155-SPRUCE 157-LATIN WALNUT

158-METALIC ELM 160-MILAS 162-DAMSON 164-P.ORANGE

391-WHITE LEOPARD

392-CREAM HONEYSUCKLE

393-WHITE DIAMOND

396-BLACK MARBLE

397-WHITEHONEYSUCKLE

400-VIOLET ROSE398-BLACK HONEYSUCKLE

395-WHITE MARBLE

399-GOLD

394-BLACK DIAMOND

1312

623-HG MILANO

312-SUPER MATTWHITE

539-PROJECTWHITE

textured melamıne

Textured Melamine BoardsThe latest European trends in deep textured, double faced, woodgrain melamine boards on MDF core. The look of real wood without the price tag !

2 Color options. More coming soon.

Sizes: 7' x 9'Packing: 30 pcs per color per bundle

18mm High Moisture Resistant MDF CoreMatching 1mm EdgingGreat savings compared to Reconstituted Timber Increased efficiency in the manufacturing processElimination of colour matching problems

Modern color palette

European design

Stocked locally

1514

WOOD COMPOSITE CountertopPlastıx-top® countertopThe world’s First 100% Water-Resistant Worktop Quality, Nature and Hygiene converge to create the very best in COMPOSITE countertop technology at a great price point.

Plastix-Top® is your new Composite Counter With over 20 designer color options, Plastix-Top® is extremely resistant to scratches and water, making it the most economical and practical choice for all kitchen and vanity counters.

• Light and easy to handle• 100% Water resistant - will not deform over time like particleboard.• Heat and fire resistant• Stain resistant• Extremely durable and scratch resistant• Inexpensive• Antibacterial• No PVC content• Super matt and stone looking textured surfaces available. High Gloss will also be available soon.• 100% Recyclable• Easy and effortless to cut and install. Low labor cost - Completely DIY.

3096 4428 4443 5404 5409 5411 5414

5416 3190 5432 5433 5604 5605 5606

5628 5629 5642 5644 5645 5646 5646

1716

Dims and Weights

25” x 110” ( 2’ x 9’ ) : 50 lbs

25” x 144” ( 2’ x 12’ ) : 65 lbs

quıck shıp panel colors

Metalic Elm Milano Super Matt White Super Matt New Grey Project White Ank. Metalic Black

Canvas Belge Pearl Ivory Pearl Black Linen Cappucino Red White

Light Real Oak Dark Real Oak

1918

Ultra hıgh gloss

Prolak

Textured melamıne

Edgebandıng

100% Matching PVC and Acrylic Edgebanding

Examples

All of our edgebanding matches our boards 100% and are of he highest standards.

Most are available in 22-23 and 43 mm widths / 1 and 2 mm thickness.

NEW : Glass Look Collection Acrylic edgeband & Aluminum edgeband

2120

CUSTOM SIZE DOORS

Custom Size Door Manufacturing

LACQUER CUSTOM SIZED DOORS

Moulding Models Available

We have now also started to manufacture specialorder, custom sized doors.

3 options are available as follows :

a) PVC Ultra High Gloss or Super Matt Doors with matching edgebandingb) UV Lacquer High gloss or matt Doors with edgebandingc) Acrylic lacquer doors in Matt or High Gloss with various mouldings.

Minimum order qty is US$ 5000 per order Delivery is 6-12 weeks depending on order size.Please contact us for individual pricing. Below please see the types available:

2322

UV LACQUER WITH EDGEBANDING

ACRYLIC MATT LACQUER

ACRYLIC GLOSSY LACQUER

UV LACQUER WITH EDGEBANDING

ACRYLIC MATT LACQUER ACRYLIC GLOSSY LACQUER