omegafire basal, a sample omegafirebasal,a sample use an ... · omegafire basal, a sample making a...
TRANSCRIPT
OmegaFire Basal, a sample
making a 10 mins Fireworks Show
with Music Control
OmegaFire Basal, a sample
making a 10 mins Fireworks Show
with Music Control
1
2
Two ways to work with to haveMusic Control1 Use an Android Device.2-Use a RF Transmitter.
:-
Use an Android mobile phone
to have Music Control
Use an Android mobile phone
to have Music Control
Of course you should power and turn on all devices during using.
Parts included:
Module OF32Q Slave OF12Q Master M2 Router
RS485 Wire Ethernet Cable
Mobile Phone
-10 minutes, 44 firing points, 2 melodies
Softwares included:
Melody CombinerFireworks Show EditorAndroid APP
-Used to combine melodies according to a timeline. Runs in a computer with Windows system.-Create a firing file according to a combined melody. Runs in a computer with Windows system.
-Transfer and run firing program. Runs in a mobile phone or tablet computer with Android system.
The softwares above should be installed / put in the corresponding computer or mobile phone in advance.
Step 1-Click Timeline toinput time 10 minute
Step 2-Click toinput two melodies
Step 3-Select the melody
Step 4-Click and and then click your mouse in the Timeline toselect a new position, then click . Or input the fields directly.
Relocate Last Point
Confirm
Step 5-Click to combineand generate a newmelody named:
)(
FireworksShow.wav
Use Melody Combiner software tocombine two melodies to be oneat timeline length 10 minutes ina Windows computer.
Mobile Phone Control-Process 1:
Combine melodies
Mobile Phone Control-Process 1:
Combine melodies
Melody Combiner
Step 3-Click to play melody
GenerateStep 4-Click togenerate firing points inTimeline
Step 1-Click toinput the combined moledyFireworksShow.wav
Input Melody
Step 2-Click to create MasterAB, Module A & Module B
1
2
Mobile Phone Control-Process 2:
Create a firing file
Mobile Phone Control-Process 2:
Create a firing file
Step 5-Click to save asFireworksShow prj.
Step 6-Transferinto a mobile phone
FireworksShow prj.
Run RFRemotech Fireworks Show Editor software in a Windowscomputer to create a firing file, and then transfer the file into anAndroid mobile phone.
Mobile Phone Control-Process 3:
Transfer firing program and configure system
Mobile Phone Control-Process 3:
Transfer firing program and configure system
Have the Master M2 and the mobile phone connected to Ethernet.Have all units of OmegaFire Basal connected with each other and powered on.Make the M2 and the mobile phone are synchronized with each other.
Step 1-Load FireworksShow.prjfile in the mobile phone andtransfer the program to M2.
FireProgram Fire
(Music Control Fire)Search PRJ files in thisdevice
1.Program2.DEMO
4.Sychronize/disable remotecontrollers
5.Test
3.Manage modules and IDs
Logic ID Module ID Type
Totally 4 Logic IDs, 2 Module IDs.
001 12Q002 32Q003 2324FCD02390 12Q004 0624EFCA0985 32Q
3.1.Module ID & Logic ID list3.2.Change matching of
modules & Logic IDs3.3.Create more Logic IDs3.4.Delete free Logic IDs
Press to look up moremodules /IDs,press to changematching or view information.
Up/DownEnter
Logic ID Module ID Type
Totally 4 Logic IDs, 2 Module IDs.
001 2324FCD02390 12Q002 0624EFCA0985 32Q003 12Q004 32Q
Press to look up moremodules /IDs,press to changematching or view information.
Up/DownEnter
Step 2 Make the OF12Q moduleand the OF32Q module areassigned to Logic ID 001 and 002in the M2 respectively
-
.
12 5V.
Available to programme DEMO
Synchronize manage modules
TEST ect
, ,
,
& ..
Internet Controller MEID
8542125478956A
:
Master ID 34FFD50542
Version:Master_V3.1.1Da
:
Connected firing modules12Q module: 23 units32Q module: 48 units
Available cue: 510
64%
Depress and hold button for 3
seconds to enter Menu.
Enter
Internet
Make sure Logic ID 001 is assigned to the OF12Q module and Logic ID 002 isassigned to the OF32Q module.
Mobile Phone Control-Process 4:
Music Control
Mobile Phone Control-Process 4:
Music Control
Make the 3-Position Switches of the Master M2and firing modules OF12Q & OF32Q at ARM.
Click to unclock.
Click to play the combined melodyand fire.
USB Wire
Min USB Wire
Audio USB Wire-
Audio Splitter
Use an RF Transmitter TCF200-U
to have Music Control
Use an RF Transmitter TCF200-U
to have Music Control
Of course you should power and turn on all devices during using.
Parts included:
Module OF32Q Slave OF12Q Master M2 TCF200-U
RS485 Wire
-10 minutes, 44 firing points, 2 melodies
Softwares included:
Melody CombinerFireworks Show Editor
-Used to combine melodies according to a timeline. Runs in a computer with Windows system.-Create a firing file according to a combined melody. Runs in a computer with Windows system.
The softwares above should be installed / put in the corresponding computer in advance.
Others
Step 1-Click Timeline toinput time 10 minute
Step 2-Click toinput two melodies
Step 3-Select the melody
Step 4-Click and and then click your mouse in the Timeline toselect a new position, then click . Or input the fields directly.
Relocate Last Point
Confirm
Step 5-Click to combineand generate a newmelody named:
)(
FireworksShow.wav
Use Melody Combiner software tocombine two melodies to be oneat timeline length 10 minutes ina Windows computer.
RF Control-Process 1:
Combine melodies
RF Control-Process 1:
Combine melodies
Melody Combiner
Step 3-Click to play melody
GenerateStep 4-Click to generatefiring points in Timeline
Step 1-Click toinput the combined moledyFireworksShow.wav
Input Melody
Step 2-Click to create MasterAB, Module A & Module B
1
2
RF Control-Process 2:
Create a firing file
RF Control-Process 2:
Create a firing file
Step 6-Click to select Master AB
Run RFRemotech FireworksShow Editor software in aWindows computer to createa firing program, and thendownload the program intothe Master M2.
Step 5-Connect M2 in USB Wire
Step 7-Click to downloadprogram into M2Master AB
RF Control-Process 3:
Configure the master M2
and the modules
RF Control-Process 3:
Configure the master M2
and the modules
Have all units of OmegaFire Basal connected witheach other and powered on.Make the M2 and the transmitter TCF200-U aresynchronized with each other.
1.Program2.DEMO
4.Sychronize/disable remotecontrollers
5.Test
3.Manage modules and IDs
Logic ID Module ID Type
Totally 4 Logic IDs, 2 Module IDs.
001 12Q002 32Q003 2324FCD02390 12Q004 0624EFCA0985 32Q
3.1.Module ID & Logic ID list3.2.Change matching of
modules & Logic IDs3.3.Create more Logic IDs3.4.Delete free Logic IDs
Press to look up moremodules /IDs,press to changematching or view information.
Up/DownEnter
Logic ID Module ID Type
Totally 4 Logic IDs, 2 Module IDs.
001 2324FCD02390 12Q002 0624EFCA0985 32Q003 12Q004 32Q
Press to look up moremodules /IDs,press to changematching or view information.
Up/DownEnter
Configure systemMake the OF12Qmodule and theOF32Q module areassigned to LogicID 001 and 002 inthe M2 respectively
-
.
12 5V.
Available to programme DEMO
Synchronize manage modules
TEST ect
, ,
,
& ..
Internet Controller MEID
8542125478956A
:
Master ID 34FFD50542
Version:Master_V3.1.1Da
:
Connected firing modules12Q module: 23 units32Q module: 48 units
Available cue: 510
64%
Depress and hold button for 3
seconds to enter Menu.
Enter
Internet
Make sure Logic ID 001is assigned to theOF12Q module andLogic ID 002 isassigned to theOF32Q module.
Step 4-Select Address No.2
Step 2-Turn on powerStep 3-Select Program
Step 7-Press START tosend command to M2 tosynchronize
Step 5-Press A
Step 4-Turn on power
Step 6-Select No.2Step 5-Select Program
A is the default button.
Step 1-Download thecombined melodyFireworksShow.wavto a player.
Step 7-.Play
FireworksShow wavto have Music Control
You must synchronize thetransmitter TCF200 U and theMaster M2 before have MusicControl.Do the steps one by oneaccording to the guides.
-
Step 6B-Press Shift tomake the module readyto learn transmitter.
Awaiting thecommand ofTransmitter A,B or C...
12 5V.
Available to programme DEMO
Synchronize manage modules
TEST ect
, ,
,
& ..
Internet Controller MEID
8542125478956A
:
Master ID 34FFD50542
Version:Master_V3.1.1Da
:
Connected firing modules12Q module: 23 units32Q module: 48 units
Available cue: 510
64%
Depress and hold button for 3
seconds to enter Menu.
Enter
Internet
Step 6A-Make the switch at Program
Step 1-Select FSK
Step 6-See the rightStep 6A and Step 6B
Synchronize TCF200-U and M2
12 5V.
Available to programme DEMO
Synchronize manage modules
TEST ect
, ,
,
& ..
Internet Controller MEID
8542125478956A
:
Master ID 34FFD50542
Version:Master_V3.1.1Da
:
Connected firing modules12Q module: 23 units32Q module: 48 units
Available cue: 510
64%
Depress and hold button for 3
seconds to enter Menu.
Enter
Internet
Step 2-Make the 3-PositionSwitches of the Master M2and firing modules OF12Q& OF32Q at ARM.
RF Control-Process 4:
Music Control
RF Control-Process 4:
Music Control
Step 3-Connect parts
Mini USB Wire Audio USB Wire-
Audio Splitter
OmegaFire Basal, a sample
making a 10 mins Fireworks Show
with Music Control
OmegaFire Basal, a sample
making a 10 mins Fireworks Show
with Music Control
1
2
Two ways to work with to haveMusic Control1 Use an Android Device.2-Use a RF Transmitter.
:-