old london road smoke extract system
TRANSCRIPT
Project
To design install commis-
sion and maintain a me-
chanical smoke extract sys-
tem to comply with
BSEN12101— part 6
System Components
Fire Rated Case Axial Fans
Motorised Dampers opening
into a preformed smoke
shaft
Design Considerations
Flow through the doors
from 1.2m/s to 1.5m/s to
meet the standards .75m/s
and achieving the perfor-
mance of a class D system.
Smoke Cleared from the
corridor in 30 secs
Contact E [email protected] W www.airpressuresolutions.co.uk T 01732 652025
Watch the system in action here - http://bit.ly/1nTkERB
We were asked to design, supply,
install and commission a smoke
extract system for some residen-
tial apartments in a popular Lon-
don suburb. We got involved
towards the end of the project as
the contractor was not getting
the required response from the
specified company.
We were asked to attend a number of meetings with all parties involved
which included building control, the architect, contractor and building ser-
vices engineer to engineer a system for this building and to comply with
the appropriate standards.
The reason for the system was that there was only one means of escape
for the flats that were above some retail outlets.
The system was installed and
commissioned in a matter of
weeks to enable the new tenants
to move in on the required date
by the building owners so all par-
ties were delighted.
As a global leader in pressure venting we have over 30 years experience in developing pressure venting & associated
products to many different markets globally. Our product line up consists of the following Pressure, Blast & Air Sta-
bilisation Vents, Fire Dampers, Window Actuators, Leak Detection, Facility Monitoring Equipment, Ventilation Prod-
ucts and Smoke Control Systems. If you want a further look at our products please look at our website or please call.
We at AP Solutions are able to offer
products manufactured by many of the
industries key players but are not tied
to these so we are able to offer solu-
tions to suit our clients requirements