oil-xplus advantage compressor treatment/brochures/fil… · compressed air filter elements are...

Product Information Sheet

ENGINEERING YOUR SUCCESS.

Replacement elements for the Parker domnick hunter OIL-Xplus compressed air filter housings

Compressed air filter elements are designed to remove oil and water in liquid and aerosol state, atmospheric dirt and solid particulate.

The Parker domnick hunter OIL-Xplus elements have been proven and trusted for many years, delivering continuous high quality compressed air. The design of the OIL-Xplus ADVANTAGE element has been modified to now include pleated media construction and improved drainage material.

Pleated media construction reduces the differential pressure over the elements service life, reducing operational costs. Changes to the materials of construction of the element, increases the operating parameters of the standard replacement element.

Product Features:• Lowesttotalcostofownership

• Energysavingsof49%overtheoriginal OIL-Xplus element

• Lowerenvironmentalimpactreducing CO2 emissions

• Guaranteedcontinuousairquality

• Designtoberetrofittedintooriginal OIL-Xplus filter housing

• ReplacesstandardAO,AAandAO-TS, AA-TSgradeelements

• Maximumoperatingtemperature100°C

OIL-Xplus ADVANTAGEwith domnick hunter technology

Contact Information:ParkerHannifinManufacturingLimiteddomnick hunter Filtration and Separation DivisionDukesway, Team Valley Trading Estate Gateshead, Tyne and WearEngland NE11 0PZ

Tel: +44(0)1914029000Fax:+44(0)1914826296 Email:[email protected]/dhfns

mb air systems ltd

ENGINEERING YOUR SUCCESS.

Energy efficiency and low lifetime costsAny restriction to air flow within a filter housing and element will reduce the system pressure. To generate compressed air, large amounts of electrical energy are consumed, therefore the pressure losses within the system can be directly converted into a cost for wasted energy. The higher the pressure loss, the higher the energy cost.

Catalogue: OIL-XPLUS ADVANTAGE PIS 11/12©2012 Parker Hannifin Corporation. All rights reserved.

**Filtration Grades:GRADE AOGeneral Purpose Coalescing & Particulate FiltrationParticle removal down to: 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C / 0.5 ppm(w) at 70°F.

GRADE AAHigh Efficiency Coalescing & Particulate Filtration(Precede with Grade AO filter)Particle removal down to: 0.01 micron, including water and oil aerosols. Maximum remaining oil aerosol content : 0.01 mg/m3 at 21°C / 0.01 ppm(w) at 70°F.

GRADE AR - (use Grade AO element)General Purpose Particluate FiltrationDry particle removal down to : 1 micron.

GRADE AAR - (use Grade AA element)High Efficiency Particluate FiltrationDry particle removal down to 0.01 micron.

Replacement element kit

Tofitfilterhousingcode Filter element code**

(grade)0006G/0009G K009 (grade)






(grade)-/0145G K145 (grade)







(grade)0900G/1000G K330 (grade) x 3

Element cross reference list

Dimensions(mm)&weights(g)

LengthxWidthxHeight Weight

85x50x50 60

105x57x57 120

165x57x57 160

185x83x83 300

285x83x83 420

285x83x83 420

285x83x83 420

400x92x92 700

400x92x92 700

650x92x92 1050

430x140x140 1100

430x140x140 1100

650x140x140 2050

650x92x92(x3) 1050 (x3)

Component Material(s)

TopEndcap Glass Filled Nylon

BottomEndcap Glass Filled Nylon

‘O’ Rings High Nitrile Rubber

Cylinders Stainless Steel

FilterMediaBorosilicate Glass

Nanofibres

AntiRe-Entrainment Barrier

Polyester

Adhesive Epoxy Resin

Applies to grades AO and AA onlyMinimum recommended operating temperature 1.5°C (35°F)Maximum recommended operating temperature 100°C (212°F)

New pleated versus wrapped filter elements

Packed dimensions and weights

OIL-Xplus ADVANTAGE AA

OIL-Xplus WRAPPED AA

% DIFFERENCE

CO

ST T

O R

UN

PER

YEA

R (£

)Lower Δp = lower energy costs = reduced CO2 emissions

Materials of construction Grades AO & AA

* Running costs based on a 75 kW compressor having a kWh cost of £0.08,

operating 24/7 hours / year.

mb air systems ltd

mb air systems ltdCompany Directory:

149 Glasgow Road Wellheads Road Wishaw Farburn Industrial Estate Lanarkshire Dyce, Aberdeen ML2 7QJ AB21 7HG Tel 01698 355711 Tel 01224 723434 Fax 01698 359299 Fax 01224 723545 Fleming Close 8 Burford Way Segensworth East Boldon Business Park Fareham Boldon Hampshire Tyne & Wear PO15 5SB NE35 9PZ Tel 01489 588398 Tel 0191 519 5500 Fax 01489 588381 Fax 0191 537 1105

E-mail [email protected]

www.airwinch.co.uk

engineering solutions

com

pres

sed

airde

sign

pneu

mat

ics

& to

ols

prod

uct fi

nish

ing

serv

ice

offs

hore

lifti

ng

oil-xplus advantage compressor treatment/brochures/fil… · compressed air filter elements are...

Documents