oil states brand catalog
TRANSCRIPT
Table of Contents
Swab Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Swab Cup Reference Chart . . . . . . . . . . . . . . . . . . . .2
Swab Mandrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Rope Sockets, Wireline Oil Saver . . . . . . . . . . . . . . .4
Rod Stripper Rubbers, Pipe Wipers . . . . . . . . . . . . . .5
Tubing Stripper Rubbers . . . . . . . . . . . . . . . . . . . . .6-7
Tubing Test Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
OSI Sucker Rod Guides . . . . . . . . . . . . . . . . . . . . . .9
OSI Packer Cups . . . . . . . . . . . . . . . . . . . . . . . .10-11
Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Oilfield Products Catalog - Page 1
Swab Cups
Type HL-HD Wire Cups*These wire cups are designated as HL or HD series for Heavy Load or HeavyDuty. The rugged cups are made of strong, flexible spring steel reinforcing wiresinserted into an alloy steel base. This forms the “skeleton” for the tough body ofspecial compounded oilfield rubber to make the ultimate cup for deep, heavyduty service. Available in sizes from 1-1/4” tubing through 7” casing.
Type EL Wire Cups*The EL series wire cup is a strengthened version of Oil States standard HDseries cup. Because of the extra length and improved wire arrangement, the ELworks best in heavy load situations. A combination of long and short wiresaffords maximum wire density in the critical lower load area of the cup. The ELuses the same high-performance oilfield rubber compound as the HD series.Because of the improved wire arrangement and thicker rubber, it is notnecessary to use sleeves when running the EL. *Special order only.
Type M CupsThe workhorse of the “all-rubber” type cups. The M series utilizes an ideal cupconfiguration, molded of a special long wearing rubber compound bonded to analuminum or steel sleeve. Type M cups are recommended for deep, heavy dutyjobs as well as medium load work. This is Oil States most popular “all-rubber”cup.
Type RTL CupsMedium to light loads can be adequately handled by this rubber cup. Featuringeither steel or aluminum insert sleeves, the RTL cup has a unique “dual lip”feature. The thin lip of the dual lip is the load lip and the heavier long lip is thesupporting portion. The same tough Oil States compound used in the M seriescups makes the RTL cup Rough, Tough, and Long lasting. Available in allpopular sizes of tubing in both full size and undersize.
SD Series (Sand Devil) CupsThese highly efficient Oil States all-rubber sand swab cups are designedespecially for use in problem wells where there is danger of “sticking” due to ahigh ratio of sand suspended in the fluid. They are also highly suitable for liftinglight loads. The number of Sand Devil cups on a mandrel can be varied to fitspecific conditions. Available in 2”, 2-1/2” and 3” tubing and 4-1/2” and 5-1/2”casing sizes.
Type SV CupsSV type swab cups are ideal for use in wells where there is a high ratio of sandsuspended in the fluid. These long-life cups are designed to fall fast to speedup swabbing and the flexible lips of the cup automatically expand under a loadto compensate for wear. Available in 2”, 2-1/2” and 3” tubing sizes.
Wireless CupsThese Oil States cups are of a wireless design for use as a long-wearing lightload cup. Specially compounded heavy rubber cup walls molded around ametal base provide for long service life.
*Patented
HL-HD WireCups
EL WireCups
Type RTLCups
SD Series(Sand Devil)
Cups
Type SVCups
WirelessCups
Type M Cups
Swab Cup Reference Chart
Oilfield Products Catalog - Page 2
** Sleeves recommended with these swab cups on SJ-20, SJ-21, SJ-25 or SJ-26 mandrels.~ Available with steel or aluminum insert; all others available with steel insert only.
Oil States Casing Swab Cups Part NumbersWire Type
Std.CupO.D.
SD Type CupO.D.
W Type(Wireless)
CupO.D.
RTL Type CupO.D.
454-1 4.01 454-SD-ST 4.00 454-1W 4.12454-2 3.91454-3 3.73504-1 4.37504-2 4.10 504B-RTL-AL 4.25554-1 5.00
554-SD-ST 4.95554-1W 5.10
554-2 4.89554-4 4.73 554-3W 4.99
554B-RTL-AL4.87
554-4 4.73 4.75704-1 6.52
700-SD-ST 6.47704-2 6.30704-3 6.14
Casing DataNom. Csg.
SizeO.D.
(inches)Lbs./Ft. Csg. I.D.
(inches)
4 1/2” 4.5009.5-11.6 4.090-4.000
13.5 3.92015.1 3.826
5” 5.00011.5-15.0 4.560-4.408
18.0 4.276
5 1/2” 5.500
14.0 5.01215.5 4.95017.0 4.89220.0 4.778
7” 7.00017.0 6.538
22.0-23.0 6.456-6.36626.0-29.0 6.276-6184
Oil States Tubing Swab Cups Part NumbersWire Type M Type RTL Type SV Type SD Type
MandrelPartNumber
CupO.D.
PartNumber
CupO.D.
Part NumberCupO.D.
PartNumber
CupO.D.
PartNumber
CupO.D.
124-HL 1.30 124-R~ 1.35 120154-HD 1.57 154-RTL~ 1.58 150154-HY 1.49 154R-HY-AL 1.50 150
216 1.63 216-RTL~ 1.66 150204-HD** 1.92 M-2~ 1.95 204-RTL~ 1.96 204-SV~ 1.96 204-SD 1.99 200, SJ20,
SJ21204-HD** 1.92 UM-2~ 1.93 204-RTL-U~ 1.93238-PH6 1.77 M-1~ 1.76 150254-HD** 2.34 M-5~ 2.39 254-RTL~ 2.39 254-SV~ 2.43 254-SD 2.43 250, SJ25,
SJ26254-HD** 2.34 UM-5~ 2.35 254-RTL-U~ 2.35278-PH6** 2.22 M-7~ 2.24
200, SJ20,SJ21278-DP** 2.12 M-6~ 2.17
278-DP** 2.12 278-R-DP-AL 2.14304-HL 2.97 M-3~ 2.92 304-RTL-ST 2.98 304-SV~ 2.96 304-SD 2.96
250, SJ25,SJ26
304-HY** 2.83350-PH6** 2.62350-DP** 2.56 350R-DP-1~ 2.73350-DP** 2.56 350R-DP-2~ 2.59
Tubing DataNom.Tbg.Size
O.D.(in.)
Lbs. / Ft.I.D.(in.)
Joint BoredI.D. (inches)
1 1/4” 1.660 2.40 1.380
1 1/2” 1.9002.90 1.6103.64 1.500
1 3/4” 2.063 3.40 1.750
2” 2.3754.60-4.70
1.9954.70 1.945- 1.925.95 1.867 1.805
2 1/2” 2.875
6.40-6.50 2.441
6.50 2.375 7.90 2.323 2.2658.70 2.259 2.200
10.40 2.151
3” 3.500
9.20 2.99210.30 2.92212.95 2.750 2.68713.30 2.76415.50 2.602
Swab Mandrels
Oilfield Products Catalog - Page 3
Components122-U Upper Section
122-L Lower Section
121-A Nose Guide
151-U Upper Section
152-L Lower Section
151-A Nose Guide
Model Size
120~ 1 1/4”
150 1 1/2”
Pin Size5/8” S.R.
5/8” S.R.
5/8” S.R.
5/8” S.R.
5/8” S.R.
5/8” S.R.
Model Size
200~** 2”
250~** 2 1/2”
Components 202 Mandrel
201 Adapter
252 Mandrel
201 Adapter
Pin Size3/4” S.R.
3/4” S.R.
3/4” S.R.
3/4” S.R.
Model Size
SJ-202”
SJ-21~
SJ-252 1/2”
SJ-26~
Pin Size
3/4” S.R.
Components SJ-1 Adapter
SJ-2 Upper SectionSJ-3 Lower Section
SJ-1 AdapterSJ-6 Lower Section
SJ-1 AdapterSJ-4 Upper SectionSJ-5 Lower Section
SJ-1 AdapterSJ-7 Lower Section
** For use with all Rubber Type Cups.~ May be used with Wire Type Cups if sleeves are used.
Two Basic TypesSwab Mandrels from Oil States areavailable for use with wire or “all rubber”type swab cups. Wire type tubing and drillpipe swab cups (1 1/4” through 3 1/2”) canbe used on the “all rubber” type mandrelsby utilizing sleeves available from OilStates.
Maximum Fluid By-PassTubing and drill pipe mandrels are fluted,allowing maximum fluid by-pass whilelowering the mandrel to swabbing depth.Steel mandrels are either machined ordrop forged from high strength alloy steel.All mandrels exceed strengthrequirements for wire rope sizesrecommended for use with mandrels.
Mandrel with NutSpacing
Ring
SKJ-45 MANDREL 1-CUPSKJ-45 RING
SKJ-45 MANDREL 2-CUPSKJ-55 MANDREL 1-CUP
SKJ-55 RINGSKJ-55 MANDREL 2-CUP
Top Section3/4” Pin
SKJ-55 TOP
SKJ-55 TOP
Model
SKJ-45, 1 CUPSKJ-45, 2 CUPSKJ-55, 1 CUPSKJ-55, 2 CUP
120 or150
TubingSwab
Mandrel
SJ-21 orSJ-26
Mandrel
SJ-20 orSJ-25SwivelJoint
Mandrel
Tubing Mandrels for Wire or All Rubber Type Cups
Straight Mandrels for use with All Rubber Type Cups**
SKJ Series Knuckle Joint Swab Mandrels
Swivel Joint Mandrels
Oil Saver Bushings PreventsPremature Rubber WearBy centering the wireline in the oil saver unit,Oil Saver Bronze Bushings prevent prematurewear on the rubbers, as well as othercomponents in the oil saver unit.
Simple Installation and RemovalOil States bushings are equipped withconvenient spring clips for easy installation andremoval from the wireline.
Part Number Bushing TypeUsed w/
Rubber NumberOS-GA Guiberson “H” GAOS-GA-3/4”
Rope Sockets, Wireline Oil Saver
Oilfield Products Catalog - Page 4
Sure Swivel Rope Sockets - Fish Neck GroovesRope Sockets are constructed of high quality materials andare continuously checked for even the slightest defect. Fishneck grooves are incorporated on the upper neck and lowerhalf of the type SS-1 rope sockets. These units are availablefor various wire rope sizes.
Rope SocketsCompleteAssembly
Tubing Size Rope FishingNeck Size
Thread Size Components
RS109696 1”
1/2” - 5/8”
.700” 9/16” - 12 N.C. 1 ea: RS109600 .8125” x 9/16” BOTTOM1 ea: RS100096 .8125” TOP, 9/16” WIRELINE
SS1158581-1/4” to 1 3/4” 1.000”
5/8” API SuckerRod Thread
1 ea: SS115800 1-1/4” x 5/8” BOTTOM1 ea: SS110058 1-1/4” TOP, 5/8” WIRELINE
SS115896 5/8” API SuckerRod Thread
1 ea: SS115800 1-1/4” x 5/8” BOTTOM1 ea: SS110096 1-1/4” TOP, 9/16” WIRELINE
SS1358581-1/2” to 2-1/2” 1.188”
5/8” API SuckerRod Thread
1 ea: SS135800 1-1/2” x 5/8” BOTTOM1 ea: SS130058 1-1/2” TOP, 5/8” WIRELINE
SS135896 5/8” API SuckerRod Thread
1 ea: SS135800 1-1/2” x 5/8” BOTTOM1 ea: SS130096 1-1/2” TOP, 9/16” WIRELINE
RS155896 1-1/2” 1.125” 5/8” API SuckerRod Thread
1 ea: RS155800 1-1/2” x 5/8” BOTTOM1 ea: RS150096 1-1/2” TOP, 9/16” WIRELINE
SS173412
2” to 3” 1.375”
3/4” API SuckerRod Thread
1 ea: SS173400 2” x 3/4” BOTTOM1 ea: SS170012 2” TOP, 1/2” WIRELINE
SS173458 3/4” API SuckerRod Thread
1 ea: SS173400 2” x 3/4” BOTTOM1 ea: SS170058 2” x 5/8” WIRELINE
SS173496 3/4” API SuckerRod Thread
1 ea: SS173400 2” x 3/4” BOTTOM1 ea: SS170096 2” TOP, 9/16” WIRELINE
Rope Socket
OS-GA Bushing Assembly forGuiberson Type H Oil Saver Rubbers
Part # Type SizeGA-9/16 Type H - Black 0 - 5/16”
3/8” - 5/8”3/4” - 1”
GA-9/16-G Type H - GreenGA-9/16-M Guiberson “H” (Med) GA-9/16-S Guiberson “H” (Soft)
O-GA Guiberson “H” Seal KitOSB-C Bell “HR” & Bowen 3/8” - 5/8”OSBJ BJ Stipple 1/2” - 7/8”
OSBJ-1/4” BJ Stipple 1/4” - 5/8”OSB-1 Bell Type “HL” 3/8” - 5/8”
Oil Saver Rubbers - Tough, Long-Life RubberOil States Oil Saver Rubbers are molded from a specialcompound of oil, gas and abrasion-resistant rubber for longservice life. Oil and other fluids are removed from thewireline and allowed to re-enter the well, which helps preventpotential well-site contamination.
OSBJ Wireline Wiper
Type GA OSB-1 OSB-C
Rod Stripper Rubbers, Pipe Wipers
Oilfield Products Catalog - Page 5
Pipe WipersConvenient Cutting GroovesMolded into Oil States long wearing, abrasion-resistant Pipe Wipers are concentric grooveswhich act as a guide for cutting the wiper intovarious pipe sizes.
Keeps Out Foreign ObjectsPipe Wipers can also prevent foreign objectsfrom entering the well bore by covering theannulus between the tubing and the casing.
WiperSize
Tubing Size
9”
1 1/4”-2 1/16”2 3/8”2 7/8”3 1/2”
10”2 3/8”
2 7/8”-4 1/2”
12”
1 1/4”-2 1/16”2 3/8”2 7/8”3 1/2”
4”-4 1/2”
14”
2 3/8”
2 7/8”
3 1/2”-5”
17”2 3/8”
2 7/8”-5”
Cutting Grooves
Molded to fit1 1/4” - 3 1/2” tubing
sizes
Molded to fit2 3/8” tubing, or may
be cut to fit largersizes
Molded to fit1 1/4” - 3 1/2” tubing,or may be cut to fit
larger sizes
Molded to fit2 3/8” & 2 7/8” tubing,
or may be cut to fitlarger sizes
Molded to fit 2 3/8”tubing, or may be cut
to fit larger sizes
PartNumber
9SRL-19009SRL-23759SRL-28759SRL-3500
10-HB-2375
10-HB-XXXX
12SRL-190012SRL-237512SRL-287512SRL-350012SRL-XXXX14SRL-2375
14SRL-2875
14SRL-XXXX
17TL-2375
17TL-XXXX
Rod Stripper Rubbers -Excellent Service LifeRod Stripper Rubbers efficiently remove oil andother fluids from the rod string being pulled fromthe well. The special abrasion and wear-resistant rubber compound used in the stripperrubbers assures maximum product service life.
Part Number Type SizeBRS-FINGER E.E. Stripper 5/8” - 1”
RS-5350 E.E. Stripper All Rod SizesRS-5058 BJ Praetet 5/8” RodRS-5034 BJ Praetet 3/4” RodRS-5078 BJ Praetet 7/8” RodRS-5100 BJ Praetet 1” RodRS-Pigtail BJ “Pigtail” All Rod Sizes
“BRS” RodStripper Rubber
10” Handlebar Type
BJ “Praetet”
RS-5350
BJ “Pigtail”
Type SRL, 9-SRL12-SRL & 14-SRL
Thin Lip, Type TL
Tubing Stripper Rubbers
Oilfield Products Catalog - Page 6
Hercules Type
NH type 4 in 1 Petromec “Flex Grip”
OCT Type ROS OCT Type T-16 ROS
PartNumber
Description NominalSize
Guiberson TypeDH-1315
Guiberson Type
1.315
DH-1660 1.660
DH-1900 1.900
DH-2250 2-3/8
DH-2750 2-7/8
DH-3000* 2.875 DP
DH-3750* 3.500
BIW-1 TypeBIW-1-20*
BIW PX-107
2-3/8
BIW-1-25* 2-7/8
BIW-1-30* 3-1/2
Gulfco TypeGSR-12*
Gulfco Type S6
1.660
GSR-15* 1.900
GSR-17* 1.990
GSR-20* 2-3/8
GSR-25* 2-7/8
Huber TypeHERC-20*
Huber Hercules2-3/8
HERC-25* 2-7/8
Norris-Hinderliter TypeNH-12*
Norris-Hinderliter 4-1
1.660
NH-15* 1.900
NH-20* 2-3/8
NH-25* 2-7/8
Petromec TypePETRO-20
Petromec “Flex Grip” 20155-32-3/8
PETRO-25 2-7/8
OCT TypeROS-20*
OCT Type
2-3/8
ROS-25* 2-7/8
ROS-30* 3-1/2
RT-1617*
T-16 OCT Type
2.063
RT-1620* 2-3/8
RT-1625* 2-7/8
RT-1630* 3-1/2
Guiberson Type BIW PX-107
Gulfco Type S6, GSR
A product of Oil States for more than thirty years. Tubing Stripper Rubbers are
made from a proven oil and abrasion-resistant rubber.
Tubing can be pulled or run-in with pressure still on the well while also stripping
fluids off the tubing O.D. to provide a cleaner job site.
*Available by special order
Tubing Stripper Rubbers
Oilfield Products Catalog - Page 7
LarkinTop Seal
PGSR Type
Part Number Head Type SizePGSR
PGSR-12*
PGSR Type
1.660PGSR-15* 1.990PGSR-20* 2-3/8PGSR-25* 2-7/8PGSR-30* 3-1/2
Halstrip TypeHS-10* TXS-10, Halstrip 1.315HS-12* TXS-12, Halstrip 1.660HS-15* TXS-15, Halstrip 1.900HS-17* TXS-17, Halstrip 2-1/16HS-20 TXS-20, Halstrip 2-3/8HS-25 TXS-25, Halstrip 2-7/8HS-30* TXS-30, Halstrip 3-1/2
Rector TypeRSR-10*
Rector ‘S’
1.315RSR-12* 1.660RSR-15* 1.900RSR-20* 2-3/8RSR-25* 2-7/8RSR-30* 3-1/2
Larkin TypeLSK-20
Larkin ‘K’
2-3/8LSK-25 2-7/8LSK-30* 3-1/2
LSK-TS-20 2-3/8LSK-TS-25 2-7/8
LSR-12
Larkin ‘SR’
1.660LSR-15 1.900LSR-20 2-3/8LSR-25* 2-7/8LSR-30* 3-1/2
Tubing Stripper Top SealLSR-TS-20*
4-1 & Larkin ‘SR’2-3/8
LSR-TS-25* 2-7/8LSR-TS-30* 3-1/2
Marcom TypeMSR-20* Marcom 2-3/8
Halstrip
Larkin Type SR
Larkin Type K
*Available by special order.
RSR Type
Tubing Test Cups
Oilfield Products Catalog - Page 8
Bar Type CupsPart Number Tubing O.D. Tubing Weight Tool Size Durometer
150BT-2.90* 1.900” 2.90 1”
90216BT-3.25* 2 1/16” 3.25-3.4 1”
238BT-0890
2 3/8”4.6-4.7
7/8”
238BT-1070*
1 1/16”
70
238BT-1080* 80
238BT-1090 90
238BT-1091* 91
238BT-1270
1 1/4”
70
238BT-1280 80
238BT-1290 90
238BT-1291* 91
238BT-5.95* 5.95 90
278BT-1070*
2 7/8”
6.4-6.5
1 1/16”70
278BT-1090 90
278BT-1270*
1 1/4”
70
278BT-1280* 80
278BT-1290* 90
278BT-1291* 91
278BT-1370*
1 5/16”
70
278BT-1370* 70
278BT-1380* 80
278BT-1390 90
278BT-1570*
1 1/2”
70
278BT-1580* 80
278BT-1590 90
278BT-1670
1.600”
70
278BT-1680* 80
278BT-1690 90
278BT-1691* 91
278BT-7.90* 7.90 90
278BT-870* 8.70 90
350BT-1270*
3 1/2”
9.2-9.3
1 1/4”70
350BT-1290* 90
350BT-1670*1.600”
70
350BT-1690* 90
350BT-1870*
1.875”
70
350BT-1880* 80
350BT-1890* 90
350BT-2070*
2.000”
70
350BT-2080* 80
350BT-2090* 90
350BT-10.3* 10.31.855”
90
350BT-12.95
12.95
90
350BT-12.95-1670 1.600”
70
350BT-12.95-1690 90
450BT-2870
4 1/2” 9.5-11.6 2.875”
70
450BT-2880 80
450BT-2890 90
*Available Special Order Only
Drag TypeThe standard drag-type test cup is constructed
of a 70 durometer upper section with a 90
durometer lower section for greater strength.
The two compounds are bonded to a steel
sleeve and base to form a rugged, long lasting
test cup.
Bar TypeOil States bar-type tubing test cups are
available for six tubing sizes, various tool sizes
and in 70, 80 and 90 durometer nitrite rubber
compounds. A 90 durometer natural rubber
compound is also available for all-weather
operation. Field tests have repeatedly proven
the heavy-duty capabilities of this cup.
Drag Type CupsPart Number Tubing O.D. Tool Size
20-MT 2 3/8”7/8”
20-MTS 2 3/8” Hydril
25-TC 2 7/8” 1 1/16”
30-TC 3 1/2” 1 1/4”
Drag Type
Water Saver Cup
Bar TypeWater Saver Cups
Part Number Tubing O.D. Cup I.D.20-WS 2 3/8”
11/16”
25-WS 2 7/8”
30-WS 3 1/2”
20-WS-60 2 3/8”
25-WS-60 2 7/8”
30-WS-60 3 1/2”
OSI Sucker Rod Guides
Oilfield Products Catalog - Page 9
Sucker Rod GuidesIncrease Pumping EfficiencyEliminate or greatly reduce down-hole problemswith Oil States’ Hi-Temp Snap-on and Twist-onRod Guides. With a coefficient of friction whenwet lower than metal, overall pumping efficiencyis increased while costly metal-to-metal contactbetween the rods and tubing is minimized. Wearon couplings is also less, thus reducing costly rodpartings.
Fewer “Pulling” JobsThe guides also function as bearings bycentralizing the sucker rods in the tubing. Evenas tubing buckles in the well during the upstroke,the guides help prevent contact between the rodsand tubing. Polished rod loads are reduced dueto the lower friction and less abrupt stressreversals.
Snap-on GuidesThe standard of the industry for years, Oil States’Hi-Temp Snap-on guides are made of abrasion-resistant, synthetic rubber. A spring steel “clip”insert is molded into the rubber guide, providing apositive grip on the sucker rod and preventingslippage in temperatures up to 300°F.
Twist-on GuidesOil States’ Twist-on rod guides contain no metalclip insert. Tests, however, indicate an excellentholding strength due to design and materials.The Twist-on style rod guide can easily beinstalled with a pipe wrench, and withstandtemperatures up to 200°F.
Rubber Rod GuidesPart
NumberSize Rod Size Tubing
Size5820-HT 5/8” X 2” 5/8”
2 3/8”3420-HT 3/4” X 2” 3/4”7820-HT 7/8” X 2” 7/8”5825-HT 5/8” X 2 1/2” 5/8”
2 7/8”
3425-HT 3/4” X 2 1/2” 3/4”7825-HT 7/8” X 2 1/2” 7/8”1025-HT 1” X 2 1/2” 1”1125-HT* 1 1/16” X 2 1/2” 3/4” Pipe1525-HT* 1 5/16” X 2 1/2” 1” Pipe5827-HT* 5/8” X 3” 5/8”
3 1/2”
3427-HT 3/4” X 3” 3/4”7827-HT 7/8” X 3” 7/8”1027-HT 1” X 3” 1”1127-HT* 1 1/16 X 3” 3/4” Pipe1527-HT* 1 5/16” X 3” 1” Pipe3435-HT* 3/4” X 3 1/2” 3/4”
Casing7835-HT* 7/8” X 3 1/2” 7/8”1035-HT* 1” X 3 1/2” 1”1135-HT* 1 1/16” X 3 1/2” 3/4” Pipe1535-HT* 1 5/16” X 3 1/2” 1” Pipe
Twist On GuidesPart
NumberSize O.D. of
Guides(Installed)
TubingSize
TO-3420 3/4” Rod X 2” Tubing1 3/4” 2 3/8”TO-5820 5/8” Rod X 2” Tubing
TO-7820 7/8” Rod X 2” TubingTO-3425 3/4” Rod X 2 1/2” Tubing
2 1/8” 2 7/8”TO-7825 7/8” Rod X 2 1/2” Tubing
Rod coupling shows abrasivedamage of metal-to-metal friction.Sucker Rod Guides
*Available by special order.
All dimensions shown arenominal only and subject to
change without notice
A B C D E2.01 1.88 1.28 1.09 0.872.46 2.29 1.67 1.34 1.25
3.19
2.91
1.75 1.34 1.302.31 1.94 1.22
3.05 1.75 1.34 1.313.01 2.21 1.94 1.243.05 1.75 1.34 1.313.01 2.21 1.94 1.243.58 3.53 2.62
1.941.31
3.51 3.43 2.253.41 3.20 2.60 1.29
4.18 3.902.66 2.41
1.46
3.93 3.72 1.514.52 4.37 2.66
2.411.46
4.52 4.37 2.664.37 4.15 2.67
1.394.37 4.15 2.67
5.10 4.91
3.28 2.90 1.445.01 4.83
4.95 4.64
5.65 5.41 3.52 2.90 1.46
6.12 5.91 4.18 3.53 1.43
6.00
5.70 4.06 3.531.38
5.604.23 4.034.18 2.90 1.43
5.70 4.06 3.531.38
5.604.23 4.034.18 2.90 1.43
PartNumber
P-204-1P-254-1*P-304-2
*P-304-S-1P-304-1P-304-SP-304-1P-304-SP-354-1P-404-1*P-404-2
P-454-1
*P-454-DP
P-504-1
P-504-2
P-554-1
P-554-2
P-554-2A
*P-604-1
P-658-2P-658-3
*P-658-3A*P-658-3CP-658-3
*P-658-3A*P-658-3C
�
�
�
�
�
OSI Packer Cups
Oilfield Products Catalog - Page 10
Packer CupsOil States packer cups are molded from adurable oil, gas and abrasion resistant rubbercompound that withstands wear and tear, evenunder high pressure. Each is equipped with asturdy steel base for additional support in thecritical area where the wires connect to thecup base. Oil States offers over fifty individualcups, ranging from 2 3/8” tubing thru 13 3/8”casing, with optional I.D. sizes from manypopular casing sizes.
*Special compounds are available on request. High pressurecups are also available on certain sizes.
NominalTubing/Casing
O.D.
Wt.RangeLb/Ft
Tubing/Casing
I.D.
2 3/8” 4.6-4.7 1.9952 7/8” 6.4-6.5 2.441
3 1/2”
7.7 3.068
9.2-9.32.992
10.2
4”9.5 3.54811.0 3.47613.4 3.340
4 1/2”9.5 4.09011.6 4.00016.6 3.826
5”
13.0 4.49415.0 4.40818.0 4.27620.3 4.184
5 1/2”
13.0 5.04415.0 5.01215.5 4.950
17.0 4.892
20.0 4.77823.0 4.670
6”15.0 5.52418.0 5.424
6 5/8”
20.0 6.049
24.0 5.921
28.0 5.791
*Available special order only.
2 3/8” - 6 5/8” Cups
PartNumber
P-958-2*P-958-2AP-958-2BP-958-2
*P-958-2AP-958-2B*P-958-4
*P-958-4BP-958-1AP-958-1
P-958-1B*P-958-4
*P-958-4BP-958-1AP-958-1
P-958-1B*P-958-4
*P-958-4BP-958-1AP-958-1
P-958-1B*P-958-3P-958-3AP-958-3B*P-958-3P-958-3AP-958-3B P-1075
P-1075-BP-1075
P-1075-B P-1075-AP-1075-AP-1175-1
*P-1175-1BP-1175-1
*P-1175-1B*P-1200
*P-1200-BP-1338-1P-1338-1
All dimensions shown arenominal only and subject to
change without notice
A B C D E6.60 6.39 4.06 3.53 1.386.57 6.30 4.21 2.90 1.446.60 6.39
4.063.53 1.38
6.57 6.30 2.90 1.446.52 6.27 3.53 1.386.50 6.22 4.45 4.03 1.446.52 6.27 4.06
3.53 1.386.22 4.45 4.03
6.34 6.09
4.064.19 4.03 1.40
4.062.90
1.383.53
4.19 4.03 1.404.06 2.90 1.38
6.12 5.91 4.183.53
1.43
6.005.70 4.06
1.385.60
4.23 4.034.18 2.90 1.43
7.156.92 4.61
3.53
2.047.15
6.90 6.744.63
2.00
6.73 6.51 1.96
8.24 8.02 5.043.53
1.574.53
8.03 7.67
5.30
1.56
5.75 5.53
5.303.534.53
5.75 5.535.30 3.53
7.76 7.49 5.35
4.533.534.533.53
PartNumber
P-704-1*P-704-1C P-704-1
*P-704-1C P-704-1A*P-704-1BP-704-1A*P-704-1BP-704-2
*P-704-2A*P-704-2CP-704-2
*P-704-2A*P-704-2C
P-658-2
P-658-3*P-658-3A*P-658-3C
P-758-1
P-758-2
*P-758-3P-904-1
*P-904-1BP-858-1
*P-858-1AP-858-1BP-858-1
*P-858-1AP-858-1B*P-858-2
*P-858-2B*P-858-2
*P-858-2B
OSI Packer Cups
Oilfield Products Catalog - Page 11
NominalTubing/Casing
O.D.
Wt.RangeLb/Ft
Tubing/Casing
I.D.
7”
17.0 6.538
20.0 6.456
22.0 6.398
24.0 6.336
26.0 6.276
29.0 6.184
32.0 6.09435.0 6.004
38.0 5.920
7 5/8”
24.0 7.02526.4 6.96929.7 6.87533.7 6.76539.0 6.625
8 5/8”
20.0 8.191
28.0 8.017
36.0 7.825
40.0 7.725
44.0 7.625
*Available special order only.
NominalTubing/Casing
O.D.
Wt.RangeLb/Ft
Tubing/
CasingI.D.
9 5/8”
29.3 9.063
36.0 8.921
40.0 8.835
43.5 8.755
47.0 8.681
53.5 8.535
10 3/4”
40.5 10.050
55.5 9.760
60.7 9.66073.2 9.406
11 3/4”38.0 11.150
54.0 10.880
12” 40.0 11.384
13 3/8”54.5 12.61572.0 12.347
All dimensions shown arenominal only and subject to
change without notice
A B C D E9.21
8.67
5.02 3.53 1.77
9.23 5.775.53
1.624.53
9.21 5.02 3.53 1.77
9.23 5.775.53
1.624.53
9.03 8.60 5.795.53
1.643.53
8.90 8.45 5.035.53
1.814.53 3.53
9.03 8.60 5.795.53
1.643.53
8.90 8.45 5.035.53
1.814.53 3.53
9.03 8.60 5.79 4.53
1.64 5.53
8.90 8.45 5.035.53
1.814.533.53
8.80 8.42 5.805.53
1.644.533.53
8.80 8.42 5.805.53
1.64 4.533.53
10.17 9.715.83
4.53
1.64
3.534.533.53
9.85 9.30 4.53
11.25 10.50
6.12 4.53 1.655.95 3.53 1.716.12 4.53 1.655.95 3.53 1.71
11.82 11.387.22
4.531.69
11.38 10.38 3.53
12.68 12.29 7.10 4.53 1.72
*Available special order only.
�
�
�
�
�
7” - 8 5/8” Cups
9 5/8” - 13 3/8” Cups
Locations
Oilfield Products Catalog - Page 12
For over 60 years, Oil States has provided a wide array ofelastomeric and plastic products for the oil & gas, defense,
construction and general industries. Oil States maintains a highlevel of technical competency in engineering, development andmanufacturing. Oil States swab cups and packer elements are
molded from a variety of custom elastomers and meet the mostdemanding quality requirements in the industry. Oil States
Industries, Inc. has representatives carrying the Oil States andRegal product lines at the following locations:
CaliforniaLong Beach, CABakersfield, CAVentura, CATaft, CA
ColoradoGreeley, CO
IllinoisOlney, IL
KansasGreat Bend, KS
LouisianaBossier City, LAHouma, LALafayette, LA
MississippiNatchez, MSLaurel, MS
New MexicoFarmington, NMHobbs, NM
North DakotaWilliston, ND
OhioWooster, OH
OklahomaChoctaw, OKOklahoma City, OK
TexasAbilene, TXAlice, TXDecatur, TXHouston, TXKilgore, TXOdessa, TXVictoria, TX
UtahVernal, UT
WyomingCasper, WYGillette, WYRock Springs, WY
CanadaNisku, Alberta
Please call our Arlington Corporate Office forinformation concerning foreign agents and/or
stocking locations.
Proprietary Oilfield ProductsCorporate OfficeP.O. Box 670Arlington, Texas 76004Telephone: 817-548-4200Fax: 817-548-4252
Terms and Conditions of Sale
Effective December 1, 2012
Oil States Industries, Proprietary Oilfield Products, is hereafter referred to simply as Oil States.
Warranty
All Oil States products are guaranteed to be free from defects in both workmanship and materials for a period of one yearfrom date of purchase under recommended use or service. This guarantee and the liability of Oil States, however, is limited
solely to the replacement of defective parts or refund of purchase price.
Payment Terms
Net 30 Days with Approved Credit, else Payment in Advance of shipping. Master Card and Visa are accepted.
Freight Allowance
FOB Point of Shipment, Ex-works.
Export Sales
Export sales will be made only through the Proprietary Sales Department, Oil States Industries, Inc, Arlington, Texas
Pricing Policy
1. The schedule of discounts and terms and conditions of sales cannot be altered without written approval of the ProprietarySales Department, Oil States, Arlington, Texas.
2. Minimum charge on all sales, excluding discounts, labor, freight, and other service charges will be $75.00.
3. All published catalog list price and discount schedules are subject to change without notice.
4. All items classified as “Available by Special Order” are not carried in warehouse stock; delivery might exceed thatnormally experienced. A Minimum Order of $500.00 net per line item may be charged on “Special Order” items. Sales onthese items are final, and cannot be returned for credit. Contact the Proprietary Sales Department for details on“Special Order” items.
Return Goods
1. Permission must be secured from Oil States prior to return of any merchandise.
2. List of material submitted for return must show date of purchase and invoice number.
3. All return merchandise is subject to inspection by Oil States and must consist of items being actively offered for sale by OilStates.
4. A restocking charge of 15% will be made on all merchandise returned within 90 days after date of purchase. A restockingcharge of 25% will be made on merchandise returned after 90 days. Freight must be prepaid by shipper on all returnedgoods.
5. Credit will be allowed only on merchandise returned within one year of purchase date.
6. Refunds on returned merchandise will be issued in cash or in merchandise credit. Merchandise refunds in form of creditcan be applied against future purchases from Oil States, but in no case to exceed fifty percent of any one month’s purchase.
Terms and Conditions of Sale