Oil Spills from Domestic Oil Tanks

Domestic tanks are commonly used by homeowners if a mains gas supply is not available in

their area. Oil spills from domestic tanks are not very common, but they can have drastic

adverse effects on the environment. Just one liter or oil can contaminate up to one million

liters of drinking water. An oil spill or leak from a domestic oil tank is often the result of

improper installation, corrosion, or overfilling.

Oil spills from domestic tanks can be avoided if precautionary measures are taken right from

the start. Most tanks used for domestic purposes are made of steel or composite

materials, so they are susceptible to corrosion if left outdoors. To protect your tank from

extreme temperatures and harsh weather conditions, it should be installed indoors. 

If your tank must be installed outdoors, the location should meet the following criteria.

The surface should be even and made of non-combustible materials, like concrete slabs or

patio stones. The tank should not block an entrance and it should not be within 50 feet of a

well either. Make sure the tank is not placed up against a wall, which can lead to rust.

Most importantly, never install a used tank. You might think it's a good way to save money,

but reusing tanks will only invite problems and can cost you big bucks in the long run.

Up to 1000 liters of oil can leak out of a single pinhole in just eight hours, so inspecting your

tank regularly, particularly in winter, is very important. You should check for any signs of

corrosion and other damage like cracks or dents. It is also wise to apply rust-proof paint on

all parts of the tank to prevent corrosion. Tanks should be cleaned periodically as well. If left

unclean, sludge and water will accumulate and lead to internal corrosion.